ASTM Volume 08.

03, July
2021
Plastics (III): D5117–Latest; Reinforced Plastic Piping

Systems and Chemical Equipment; Plastic Building

Products

Table of Contents

C581-20 Standard Practice for Determining Chemical Resistance of

Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for
Liquid Service

C582-09(2016) Standard Specification for Contact-Molded Reinforced

Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

D953-19 Standard Test Method for Pin-Bearing Strength of Plastics

D1494-17 Standard Test Method for Diffuse Light Transmission Factor of

Reinforced Plastics Panels

D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of

“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D2143-15 Standard Test Method for Cyclic Pressure Strength of Reinforced,

Thermosetting Plastic Pipe

D2517-18 Standard Specification for Reinforced Epoxy Resin Gas Pressure

Pipe and Fittings

D2924-12(2017) Standard Test Method for External Pressure Resistance of

“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2925-14(2019) Standard Test Method for Beam Deflection of “Fiberglass”

(Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2992-18 Standard Practice for Obtaining Hydrostatic or Pressure Design
Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and
Fittings

D2996-17 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-

Reinforced Thermosetting-Resin) Pipe

D2997-15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-

Fiber-Reinforced Thermosetting-Resin) Pipe

D3262-20 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced

Thermosetting-Resin) Sewer Pipe

D3299-18 Standard Specification for Filament-Wound Glass-Fiber-Reinforced

Thermoset Resin Corrosion-Resistant Tanks

D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced

Thermosetting-Resin) Pressure Pipe

D3567-17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-

Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-

Profile Extrusions

D3679-17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D3681-18 Standard Test Method for Chemical Resistance of “Fiberglass”

(Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced

Thermosetting-Resin) Manholes and Wetwells

D3754-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced

Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass”

(Glass-Fiber Reinforced Thermosetting-Resin) Pipe
D3840-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced
Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic

Panels

D3892-15(2020) Standard Practice for Packaging/Packing of Plastics

D3982-08(2014) Standard Specification for Contact Molded “Fiberglass” (Glass

Fiber Reinforced Thermosetting Resin) Ducts

D4000-20 Standard Classification System for Specifying Plastic Materials

D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene

Molding and Extrusion Materials

D4024-15 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-

Reinforced Thermosetting Resin) Flanges

D4068-17 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting

for Concealed Water-Containment Membrane

D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced

Thermoset Resin Corrosion-Resistant Tanks

D4161-14(2019) Standard Specification for “Fiberglass” (Glass-Fiber-

Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

D4167-15 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl

Chloride) (PVC) Building Products

D4477-16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride)

(PVC) Soffit

D4495-16 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride)

(PVC) Rigid Profiles by Means of a Falling Weight

D4551-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible

Concealed Water-Containment Membrane
D4659-19 Standard Test Methods for Polyurethane Raw Materials:
Determination of Specific Gravity of Isocyanates

D4674-19 Standard Practice for Accelerated Testing for Color Stability of

Plastics Exposed to Indoor Office Environments

D4726-18 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-

Profile Extrusions Used for Assembled Windows and Doors

D4754-18 Standard Test Method for Two-Sided Liquid Extraction of Plastic

Materials Using FDA Migration Cell

D4756-15 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC)

Siding and Soffit

D4803-18 Standard Test Method for Predicting Heat Buildup in PVC Building
Products

D4890-18 Standard Test Methods for Polyurethane Raw Materials:

Determination of Gardner and APHA Color of Polyols

D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass

Reinforced Pultruded Stock

D5132-20 Standard Test Method for Horizontal Burning Rate of Polymeric

Materials Used in Occupant Compartments of Motor Vehicles

D5138-16 Standard Classification System and Basis for Specification for Liquid
Crystal Polymers Molding and Extrusion Materials (LCP)

D5155-19 Standard Test Methods for Polyurethane Raw Materials:

Determination of the Isocyanate Content of Aromatic Isocyanates

D5204-19 Standard Classification System and Basis for Specification for

Polyamide-Imide (PAI) Molding and Extrusion Materials

D5205-16 Standard Classification System and Basis for Specification for

Polyetherimide (PEI) Materials
D5206-19 Standard Test Method for Windload Resistance of Rigid Plastic
Siding

D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm

(500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

D5208-14 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of

Photodegradable Plastics

D5224-12(2019) Standard Practice for Compression Molding Test Specimens

of Thermosetting Molding Compounds

D5225-17 Standard Test Method for Measuring Solution Viscosity of Polymers

with a Differential Viscometer

D5226-16 Standard Practice for Dissolving Polymer Materials

D5227-13 Standard Test Method for Measurement of Hexane Extractable

Content of Polyolefins

D5260-16 Standard Classification for Chemical Resistance of Poly(Vinyl

Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated
Poly(Vinyl Chloride) (CPVC) Compounds

D5272-08(2013) Standard Practice for Outdoor Exposure Testing of

Photodegradable Plastics

D5279-13 Standard Test Method for Plastics: Dynamic Mechanical Properties:

In Torsion

D5296-19 Standard Test Method for Molecular Weight Averages and Molecular
Weight Distribution of Polystyrene by High Performance Size-Exclusion
Chromatography

D5319-17 Standard Specification for Glass-Fiber Reinforced Polyester Wall and

Ceiling Panels

D5336-15a Standard Classification System and Basis for Specification for

Polyphthalamide (PPA) Injection Molding Material
D5338-15 Standard Test Method for Determining Aerobic Biodegradation of
Plastic Materials Under Controlled Composting Conditions, Incorporating
Thermophilic Temperatures

D5364-14(2019) Standard Guide for Design, Fabrication, and Erection of

Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

D5365-18 Standard Test Method for Long-Term Ring-Bending Strain of

“Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties:

In Flexure (Dual Cantilever Beam)

D5419-14a Standard Test Method for Environmental Stress Crack Resistance

(ESCR) of Threaded Plastic Closures

D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic
Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D5421-15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-

Reinforced Thermosetting Resin) Flanges

D5422-17 Standard Test Method for Measurement of Properties of

Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

D5436-15(2020) Standard Specification for Cast Poly(Methyl Methacrylate)

Plastic Rods, Tubes, and Shapes

D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions

by Fourier Transform Infrared Microspectroscopy (FT-IR)

D5491-08(2014) Standard Classification for Recycled Post-Consumer

Polyethylene Film Sources for Molding and Extrusion Materials

D5492-17 Standard Test Method for Determination of Xylene Solubles in

Propylene Plastics

D5507-99(2012) Standard Test Method for Determination of Trace Organic

Impurities in Monomer Grade Vinyl Chloride by Capillary
Column/Multidimensional Gas Chromatography
D5508-16 Standard Test Method for Determination of Residual Acrylonitrile
Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene
Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of

Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D5523-15 Standard Test Method for Polyurethane Raw Materials: Acidity by

Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic
Isocyanates

D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of

Plastic Materials Under Accelerated Landfill Conditions

D5575-18 Standard Classification System for Copolymers of Vinylidene

Fluoride (VDF) with Other Fluorinated Monomers

D5576-00(2013) Standard Practice for Determination of Structural Features in

Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

D5577-19 Standard Guide for Techniques to Separate and Identify

Contaminants in Recycled Plastics

D5592-94(2018) Standard Guide for Material Properties Needed in Engineering

Design Using Plastics

D5594-18a Standard Test Method for Determination of the Vinyl Acetate

Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform
Infrared Spectroscopy (FT-IR)

D5628-18 Standard Test Method for Impact Resistance of Flat, Rigid Plastic
Specimens by Means of a Falling Dart (Tup or Falling Mass)

D5629-16 Standard Test Method for Polyurethane Raw Materials:

Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane
Prepolymers

D5630-13 Standard Test Method for Ash Content in Plastics

D5672/D5672M-15 Standard Test Method for Testing Flexible Cellular Materials
Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection
Technique

D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and

FEP Micronized Powders

D5677-17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced

Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for
Aviation Jet Turbine Fuel Lines

D5685-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced

Thermosetting-Resin) Pressure Pipe Fittings

D5740-18 Standard Guide for Writing Material Standards in the

Classification Format

D5748-95(2019) Standard Test Method for Protrusion Puncture Resistance of

Stretch Wrap Film

D5814-18 Standard Practice for Determination of Contamination in Recycled

Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

D5857-17 Standard Specification for Polypropylene Injection and Extrusion

Materials Using ISO Protocol and Methodology

D5870-16 Standard Practice for Calculating Property Retention Index of

Plastics

D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets

for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing
Systems

D5927-17 Standard Classification System for and Basis for Specifications for
Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on
ISO Test Methods

D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means

of a Transient Line-Source Technique
D5946-17 Standard Test Method for Corona-Treated Polymer Films Using
Water Contact Angle Measurements

D5947-18 Standard Test Methods for Physical Dimensions of Solid Plastics

Specimens

D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting

D5988-18 Standard Test Method for Determining Aerobic Biodegradation of

Plastic Materials in Soil

D5989-18 Standard Specification for Extruded and Monomer Cast Shapes

Made from Nylon (PA)

D5990-20a Standard Classification System and Basis for Polyketone Injection

Molding and Extrusion Materials (PK)

D5991-17 Standard Practice for Separation and Identification of Poly(Vinyl

Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

D5998-16 Standard Specification for Molded Polyethylene Shipping and

Storage Drums

D6040-18 Standard Guide to Standard Test Methods for Unsintered

Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D6041-18 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-

Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

D6042-09(2016) Standard Test Method for Determination of Phenolic

Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer
Formulations Using Liquid Chromatography (LC)

D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic

Materials

D6098-16 Standard Classification System and Basis for Specification for

Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6099-18 Standard Test Method for Polyurethane Raw Materials:
Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

D6100-17 Standard Specification for Extruded, Compression Molded and

Injection Molded Polyoxymethylene Shapes (POM)

D6108-19 Standard Test Method for Compressive Properties of Plastic Lumber

and Shapes

D6109-19 Standard Test Methods for Flexural Properties of Unreinforced and

Reinforced Plastic Lumber and Related Products

D6110-18 Standard Test Method for Determining the Charpy Impact Resistance
of Notched Specimens of Plastics

D6111-19a Standard Test Method for Bulk Density And Specific Gravity of
Plastic Lumber and Shapes by Displacement

D6112-18 Standard Test Methods for Compressive and Flexural Creep and
Creep-Rupture of Plastic Lumber and Shapes

D6117-18 Standard Test Methods for Mechanical Fasteners in Plastic Lumber

and Shapes

D6150-16 Standard Test Method for Estimating Processing Losses of Plastisols

and Organosols Due to Volatility

D6226-15 Standard Test Method for Open Cell Content of Rigid Cellular
Plastics

D6247-18 Standard Test Method for Determination of Elemental Content of

Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in

Polyethylene by Infrared Spectrophotometry

D6261-14 Standard Specification for Extruded and Compression Molded Basic

Shapes Made from Thermoplastic Polyester (TPES)
D6262-17 Standard Specification for Extruded, Compression Molded, and
Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

D6263-15 Standard Specification for Extruded Rods and Bars Made From Rigid
Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

D6265-17 Standard Practice for Separation of Contaminants in Polymers Using

an Extruder Filter Test

D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and

Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens

D6288-17 Standard Practice for Separation and Washing of Recycled Plastics

Prior to Testing

D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold

Dimensions of Molded Thermosetting Plastics

D6290-19 Standard Test Method for Color Determination of Plastic Pellets

D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic

Vulcanizates (HCTPV) Based on ASTM Standard Test Methods

D6339-11(2019) Standard Classification System for and Basis for Specifications

for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D6341-16 Standard Test Method for Determination of the Linear Coefficient of

Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30
and 140°F (–34.4 and 60°C)

D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials:

Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

D6358-19e1 Standard Classification System and Basis for Specification for Poly
(Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding
Materials Using ISO Methods

D6360-15 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

D6394-20 Standard Classification System for and Basis for Specification for
Sulfone Plastics (SP)

D6400-19 Standard Specification for Labeling of Plastics Designed to be

Aerobically Composted in Municipal or Industrial Facilities

D6436-14 Standard Guide for Reporting Properties for Plastics and

Thermoplastic Elastomers

D6437-05(2016)e1 Standard Test Method for Polyurethane Raw Materials:

Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)

D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide

Resin

D6474-20 Standard Test Method for Determining Molecular Weight Distribution

and Molecular Weight Averages of Polyolefins by High Temperature Gel
Permeation Chromatography

D6576-20 Standard Specification for Flexible Cellular Rubber Chemically Blown

D6585-17 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE)

Extruded Film or Tape

D6645-18 Standard Test Method for Methyl (Comonomer) Content in

Polyethylene by Infrared Spectrophotometry

D6662-17 Standard Specification for Polyolefin-Based Plastic Lumber Decking

Boards

D6691-17 Standard Test Method for Determining Aerobic Biodegradation of

Plastic Materials in the Marine Environment by a Defined Microbial Consortium
or Natural Sea Water Inoculum

D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene

(UHMW-PE) Solid Plastic Shapes

D6713-19 Standard Specification for Extruded and Compression Molded

Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D6777-16 Standard Test Method for Relative Rigidity of Poly(Vinyl
Chloride)(PVC) Siding

D6778-20 Standard Classification System and Basis for Specification for

Polyoxymethylene Molding and Extrusion Materials (POM)

D6779-20 Standard Classification System for and Basis of Specification for

Polyamide Molding and Extrusion Materials (PA)

D6783-05a(2017) Standard Specification for Polymer Concrete Pipe

D6835-17 Standard Classification System for Thermoplastic Elastomer-Ether-

Ester Molding and Extrusion Materials (TEEE)

D6865-17 Standard Classification System and Basis for Specifications for

Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES)
Plastics and Alloys Molding and Extrusion Materials

D6866-20 Standard Test Methods for Determining the Biobased Content of

Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

D6867-19 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer

Tubing

D6868-19 Standard Specification for Labeling of End Items that Incorporate

Plastics and Polymers as Coatings or Additives with Paper and Other
Substrates Designed to be Aerobically Composted in Municipal or Industrial
Facilities

D6869-17 Standard Test Method for Coulometric and Volumetric Determination

of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine
with Water)

D6953-18 Standard Test Method for Determination of Antioxidants and

Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

D6954-18 Standard Guide for Exposing and Testing Plastics that Degrade in
the Environment by a Combination of Oxidation and Biodegradation
D6979-18 Standard Test Method for Polyurethane Raw Materials:
Determination of Basicity in Polyols, Expressed as Percent Nitrogen

D6980-17 Standard Test Method for Determination of Moisture in Plastics by

Loss in Weight

D6988-13 Standard Guide for Determination of Thickness of Plastic Film Test

Specimens

D7027-20 Standard Test Method for Evaluation of Scratch Resistance of

Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

D7029-17 Standard Test Method for Determination of Reactivity of Unsaturated

Polyesters and Vinyl Esters at 180.0°F (82.2°C)

D7082-15 Standard Specification for Polyethylene Stay In Place Form System

for End Walls for Drainage Pipe

D7083-16 Standard Practice for Determination of Monomeric Plasticizers in

Poly (Vinyl Chloride) (PVC) by Gas Chromatography

D7132-19 Standard Test Method for Determination of Retained Blowing Agent

in Extruded Polystyrene Foam

D7133-16 Standard Test Method for Polyurethane Raw Materials: Instrumental

Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

D7134-05(2012) Standard Test Method for Molecular Mass Averages and

Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser
Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

D7191-18 Standard Test Method for Determination of Moisture in Plastics by

Relative Humidity Sensor

D7192-20 Standard Test Method for High Speed Puncture Properties of Plastic
Films Using Load and Displacement Sensors

D7193-17 Standard Specification for Unsintered Pigmented

Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D7194-19 Standard Specification for Aerospace Parts Machined from
Polychlorotrifluoroethylene (PCTFE)

D7210-13 Standard Practice for Extraction of Additives in Polyolefin Plastics

D7211-13(2018) Standard Specification for Parts Machined from

Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

D7252-17 Standard Test Method for Polyurethane Raw Materials:

Determination of Monomer and Isomers in Isocyanates

D7253-16 Standard Test Method for Polyurethane Raw Materials:

Determination of Acidity as Acid Number for Polyether Polyols

D7254-20 Standard Specification for Polypropylene (PP) Siding

D7258-17 Standard Specification for Polymeric Piles

D7292-18 Standard Specification for Extruded, Compression-Molded, and

Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D7293-19 Standard Specification for Extruded and Compression-Molded

Shapes Made from Polyetherimide (PEI)

D7309-20 Standard Test Method for Determining Flammability Characteristics

of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

D7310-20 Standard Practice for Defect Detection and Rating of Plastic Films
Using Optical Sensors

D7399-18 Standard Test Method for Determination of the Amount of

Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using
Infrared Spectrophotometry

D7436-17 Standard Classification System for Unfilled Polyethylene Plastics

Molding and Extrusion Materials with a Fractional Melt Index Using ISO
Protocol and Methodology

D7444-18a Standard Practice for Heat and Humidity Aging of Oxidatively

Degradable Plastics
D7445-18 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
with Foam Plastic Backing (Backed Vinyl Siding)

D7471-19 Standard Specification for CPT-Fluoropolymer Molding and Extrusion

Materials

D7472-19 Standard Specification for EFEP-Fluoropolymer Molding and

Extrusion Materials

D7473-12 Standard Test Method for Weight Attrition of Plastic Materials in the
Marine Environment by Open System Aquarium Incubations

D7474-17 Standard Practice for Determining Residual Stresses in Extruded or

Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

D7475-20 Standard Test Method for Determining the Aerobic Degradation and
Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor
Landfill Conditions

D7486-14 Standard Test Method for Measurement of Fines and Dust Particles
on Plastic Pellets by Wet Analysis

D7487-18 Standard Practice for Polyurethane Raw Materials: Polyurethane

Foam Cup Test

D7568-17 Standard Specification for Polyethylene-Based Structural-Grade

Plastic Lumber for Outdoor Applications

D7611/D7611M-20 Standard Practice for Coding Plastic Manufactured Articles

for Resin Identification

D7710-14 Standard Test Method for Determination of Volume and Density of

Rigid and Irregularly Shaped Molded Cellular Materials

D7711-11(2015) Standard Guide for Description of Polymer Pellet Defects

D7745-19 Standard Practice for Testing Pultruded Composites

D7774-17 Standard Test Method for Flexural Fatigue Properties of Plastics

D7791-17 Standard Test Method for Uniaxial Fatigue Properties of Plastics

D7792/D7792M-15 Standard Practice for Freeze/Thaw Conditioning of
Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural
Designs

D7793-20 Standard Specification for Insulated Vinyl Siding

D7823-20 Standard Test Method for Determination of Low Level Phthalates in

Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas
Chromatography/Mass Spectrometry

D7856-15a Standard Specification for Color and Appearance Retention of Solid

and Variegated Color Plastic Siding Products using CIELab Color Space

D7990-15 Standard Test Method for Using Reflectance Spectra to Produce an

Index of Temperature Rise in Polymeric Siding

D7991-15 Standard Test Method for Determining Aerobic Biodegradation of

Plastics Buried in Sandy Marine Sediment under Controlled Laboratory
Conditions

D7992/D7992M-15 Standard Practice for Elevated Temperature and Moisture

Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in
Structural Designs

D7993-15(2019) Standard Guide for Analyzing Complex Phthalates

D7997-15 Standard Practice for Polyurethane Raw Materials: Gel Tests for
Polyurethane Non-Foam Formulations

D8019-15 Standard Test Methods for Determining the Full Section Flexural
Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms
Assembled with Center Mount Brackets

D8033-16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK)

Molding and Extrusion Materials

D8036-16 Standard Test Method for Polyurethane Raw Materials:

Determination of Dimer Ratio in Pure MDI
D8065/D8065M-16 Standard Classification System and Basis for Specification
for Specifying Plastic Films

D8069-17a Standard Test Method for Determining Flexural Modulus of Full

Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with
Doubly Symmetric Cross Sections under Bending

D8133-20 Standard Test Method for Determination of Low Level Phthalates in

Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass
Spectrometry

D8136-17 Standard Test Method for Determining Plastic Film Thickness and
Thickness Variability Using a Non-Contact Capacitance Thickness Gauge

D8156-18 Standard Classification System for and Basis of Specifications for

Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)

D8195-18 Standard Classification System and Basis for Specification for

Polyethylene Terephthalate Film and Sheeting

D8280-20a Standard Test Method for Determination of the Blooming of

Brominated Flame Retardants onto the Surface of Plastic Materials by Ion
Chromatography

E1788-16 Standard Test Method for Acidity in Acrylonitrile

E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas

Chromatography