KLE TECHNOLOGICAL UNIVERSITY

Design Project Report On

“DESIGN AND ANALYSIS OF 8 STOREY BUILDING”

Submitted in Partial Fulfilment of the requirements for the award

MASTER OF TECHNOLOGY
IN
STRUCTURAL ENGINEERING
Submitted By
NAMES SRN
AMBIKA H JAMAGOND 02FE23MSE009
RAGHAVENDRA 02FE23MSE004
VINAYAK 02FE23MSE014

Under the Guidance of

Dr. Veerendrakumar Khed

DEPARTMENT OF CIVIL ENGINEERING

Dr. M. S. SHESHGIRI CAMPUS
KLE TECHNOLOGICAL UNIVERSITY, BELAGAVI

2023-2024
 KLE TECHNOLOGICAL UNIVERSITY

Dr. M. S. Sheshgiri Campus, Belagavi DEPARTMENT OF CIVIL

ENGINEERING

CERTIFICATE

This is to certify that the Design Project report entitled “Design and Analysis of 8 Storey
Building” submitted by Miss. Ambika H Jamagond (SRN: 02FE23MCSE009), Mr.
Raghavendra (SRN:02FE23MCSE004), Mr. Vinayak (SRN: 02FE23MCSE014), as
the record of work carried out us, have been approved as Design Project Report submission
in partial fulfillment of the requirements for the award of degree of Master of Technology
in Structural Engineering during the year 2023-2024 in the Department of Civil
Engineering, Dr. M. S. Sheshgiri Campus, KLE Technological University, Belagavi.

Dr. Veerendrakumar Khed Dr. Veerendrakumar Khed

Guide PG Coordinator

Dr. M. Manjunath Dr. S. F. Patil

Head of Department Principal

Examiners
Name of the examiners Signature with date
1.

2.
 ACKNOWLEDGEMENT

In our effort towards the realization of our Design Project work, we have drawn on the
guidance of many people for which we are glad to acknowledge.
In particular, we would like to take the opportunity to express our honor, respect, deep
gratitude and genuine regards to our guide, Dr. Veerendrakumar Khed Department of
Civil Engineering, KLE Tech, Belagavi, for his esteemed suggestions, sincere efforts and
inspiration given to us in completing our work.
We would also like to thank Dr. Veerendrakumar Khed PG Coordinator, Department
of Civil Engineering, KLE Tech, Belagavi, for informing us regarding the guidelines and
circulations from the university and encouraging us in completing the report.
We would also like to express our heartfelt thanks to Dr. M. Manjunath, Professor and
Head of the Department of Civil Engineering, KLE Tech, Belagavi, for his valuable
advice, encouragement, help, guidance and untiring support throughout the development
of the work.
 INDEX

SL NO. TITLE PAGE NO.

CHAPTER 1: INTRODUCTION 2
1.1 GENERAL 2
1.2 DESIGN BASIC REPORT 2
1.3 SEISMIC ZONES OF INDIA 3
1.3.1 SEISMIC ZONES HAS BEEN CATEGORIZED AS FOLLOWS 4
1.4 BUILDING DETAILS 5
1.5 ARCHITECTURAL PLAN OF BUILDING 6

CHAPTER 2: DESIGN CRITERIA 11

2.1 LIMIT STATE DESIGN CONCEPT 11
2.1.1 CRITERIA 11
2.1.2 ULTIMATE LIMIT STATE 11
2.1.3 SERVICEABILITY LIMIT STATE 12
2.2 LOAD CALCULATIONS 13
2.3 LOAD CASES 13
2.4 LOAD COMBINATIONS 14
2.5 GEOLOGICAL DETAILS OF SITE 14
2.6 CODE BOOKS REFERRED 15
3.1 BUILDING STRUCTURAL DETAILS 16
3.2 MODELING & ANALYSIS OF 8 STOREY BUILDING IN 18
ETABS
3.3 ETABS BEAM DESIGN REPORT 41
3.4 ETABS COLUMN DESIGN REPORT 42

CHAPTER 4: DESIGN & DETAILING 44

4.1 GROUPING OF GROUND FLOOR SLABS SCHEDULE 44
4.1.1 MANUAL DESIGN OF SLAB 45
4.1.2 DETAILING OF SLAB 49
4.2 GROUPING OF COLUMNS SCHEDULE 52
4.2.1 MANUAL DESIGN OF COLUMN 53
4.2.2 DETAILING OF COLUMN 55
4.3 MANUAL DESIGN OF BEAM 57
4.3.1 DETAILING OF BEAM 58
4.4 MANUAL DESIGN OF FOOTING 59
4.4.1 DETAILING OF FOOTING 61

CHAPTER 5: DRAWINGS 67

CHAPTER 6: CONCLUSION & REFERENCE 68

 LIST OF FIGURES

FIG NO. FIGURE TITLE PAGE NO.

1.1 FIGURE SHOWS SEISMIC ZONES OF INDIA 5

1..2 FIGURE SHOWS BASEMENT FLOOR PLAN 6
1..3 FIGURE SHOWS THE GROUND FLOOR PLAN 7
1.4 FIGURE SHOWS THE 1ST FLOOR PLAN 8
ND RD TH TH TH
1.5 FIGURE SHOWS THE 2 , 3 , 4 , 5 , 6 FLOOR PLAN 9
1.6 ABOVE FIGURES SHOWS THE 3D MODEL OF BUILDING 10
rd
UPTO 3 FLOOR
3.1 FIGURE SHOWS THE STRUCTURAL 3D MODEL OF A 18
BUILDING
3.2 FIGURE SHOWS THE UINTS AND DESIGN CODES SETTINGS 19
3.3 FIGURE SHOWS THE BUILDING STOREY HEIGHT 19
3.4 FIGURE SHOWS DEFINED MATERIAL PROPERTIES 20
3.5 FIGURE SHOWS THE FRAME SECTION REINFORCEMENT 20
3.6 FIGURE SHOWS THE BEAM SECTION PROPERTY 21
3.7 FIGURE SHOWS THE COLUMN SECTION PROPERTY 22
3.8 FIGURE SHOWS THE COLUMN REINFORCEMENT DETAILS 22
3.9 FIGURE SHOWS THE DEFINED SLAB PROPERTIES 23
3.10 FIGURE SHOWS THE ONE WAY & TWO-WAY SLAB 23
PROPERTY DATA
3.11 FIGURE SHOWS THE DEFINED SHEAR WALL 24
3.12 FIGURE SHOWS THE DEFINED DIAPHRAGMS TO SLAB 24
3.13 FIGURE SHOWS THE DEFINED PIER LABELS 24
3.14 FIGURE SHOWS THE SNAP OPTION SETTINGS 25
3.15 FIGURE SHOWS THE ASSIGNED BEAMS, COLUMNS, SLABS 26
& SHEAR WALL
3.16 FIGURE SHOWS ASSIGNED FIXED SUPPORT 26
3.17 FIGURE SHOWS MOMENT RELEASES 26
3.18 FIGURE SHOWS ASSIGNED PIER LABELS 27
3.19 FIGURE SHOWS ASSIGNED DIAPHRAGM 27
3.20 FIGURE SHOWS THE PROCESS TO CHECK MODEL AND 27
RESULTS
3.21 FIGURE SHOWS THE RESPONSE SPECTRUM FUNCTION 28
3.22 FIGURE SHOWS THE DIFFERENT LOAD PATTERNS 29
3.23 FIGURE SHOWS THE SEISMIC LOADING ALONG 29
X-DIRECTION
3.24 FIGURE SHOWS THE SEISMIC LOADING ALONG 29
Y-DIRECTION
3.25 FIGURE SHOWS THE WIND LOAD PATTERN 30
3.26 FIGURE SHOWS ASSIGNED WALL LOAD 30
3.27 FIGURE SHOWS ASSIGNED LIVE LOAD 30
3.28 FIGURE SHOWS ASSIGNED SIDL 31
 LIST OF FIGURES

FIG NO. FIGURE TITLE PAGE NO.

3.29 FIGURE SHOWS THE APPLIED LOADS 31

3.30 FIGURE SHOWS THE DIFFERENT LOAD CASES 32
3.31 FIGURE SHOWS THE LOAD CASE DATA 32
3.32 FIGURE SHOWS THE LOAD CASE DATA 33
3.33 FIGURE (a) (b) & (c) SHOWS THE DIFFERENT LOAD 34
COMBINATIONS
3.34 FIGURE SHOWS THE LOAD CASE DATA ALONG 35
X-DIRECTION
3.35 FIGURE SHOWS THE LOAD CASE DATA ALONG 36
Y-DIRECTION
3.36 FIGURE SHOWS THE BASE REACTION 36
3.37 FIGURE SHOWS THE SHEAR FORCE AND BM 37
3.38 FIGURE SHOWS THE REACTIONS ABOUT Fz AXIS 38
3.39 FIGURE SHOWS BENDING MOMENT & SHEAR FORCE 38
FOR A BEAM
3.40 FIGURE SHOWS THE BENDING MOMENT & SHEAR 39
FORCE FOR A BEAM
3.41 FIGURE SHOWS THE DESIGNED CHECKED 39
3.42 FIGURE SHOWS THE 3D STRUCTURAL MODEL 40
4.1 FIGURE SHOWS THE SLAB DETAIL ALONG SHORTER 49
SPAN (Lx)
4.2 FIGURE SHOWS THE SLAB DETAIL ALONG LONGER 49
SPAN (Ly)
4.3 FIGURE SHOWS THE GROUND FLOOR SLAB DETAILING 50
4.4 FIGURE SHOWS THE SLAB DETAIL IN BOTH X & Y 51
DIRECTION
4.5 FIGURE SHOWS THE CROSS SECTION OF CONTINUOUS 51
SLAB (Lx)
4.6 ABOVE FIGURE SHOWS THE COLUMN DETAILING 55
4.7 FIGURE SHOWS THE LONGITUDINAL SECTION OF BEAM 58
4.8 FIGURE SHOWS THE SECTION X-X AND Y-Y 58
4.9 FIGURE SHOWS THE LONGITUDINAL SECTION AND 58
CROSS SECTION OF BEAM
4.10 FIGURE SHOWS THE FOUNDATION DETAILS 61
5.1 FIGURE SHOWS THE COLUMN CENTER LINE DETAILS 62
5.2 FIGURE SHOWS THE PLINTH BEAM LAYOUT 63
5.3 FIGURE SHOWS THE GROUND FLOOR SLAB PLAN 64
5.4 FIGURE SHOWS THE 1st FLOOR SLAB & BEAM DETAILS 65
5.5 FIGURE SHOWS THE 2nd FLOOR AND ABOVE STOREY 66
SLAB AND BEAM DETAILS
 LIST OF TABLES
TABLE NO. TABLE TITLE PAGE NO.

1.4.1 TABLE SHOWS THE BUILDING DETAILS 5

2.2.1 TABLE SHOWS THE LOAD CALCULATIONS 13
2.3.1 TABLE SHOWS THE DIFFERENT LOAD CASES 13
2.4.1 TABLE SHOWS THE DIFFERENT LOAD COMBINATIONS 14
2.5.1 TABLE SHOWS THE GEOLOGICAL DETAILS OF SITE 14
3.1.1 TABLE SHOWS THE BUILDING STRUCTURAL DETAILS 16
3.1.2 TABLE SHOWS THE SLAB DETAILS 16
3.1.3 TABLE SHOWS THE BEAM DETAILS 17
3.1.4 TABLE SHOWS THE COLUMN DETAILS 17
3.1.5 TABLE SHOWS THE SHEAR WALL DETAILS 17
3.1.6 TABLE SHOWS THE MINIMUM COVER FOR 17
REINFORCEMENT
4.1.1 TABLE SHOWS THE GROUPING OF GROUND FLOOR SLAB 44
SCHEDULE
4.2.1 TABLE SHOWS THE GROUPING OF COLUMNS SCHEDULE 52