B

Small Tool Instruments

Micrometers
Micrometers Heads

INDEX
Micrometers Micrometers
Coolant-Proof Micrometer B-2,3
Digimatic Micrometer B-4
Digimatic Micrometer- MDC- Lite B-4
MDH Micrometer B-5
QuantuMike B-6
ABSOLUTE Digimatic Micrometers B-7
Micrometer Heads Quickmike B-8
Outside Micrometers B-9, 11-19
Ratchet-Thimble Micrometer B-10
Spline Micrometers B-20
Point Micrometers B-21
Crimp Height Micrometers B-22
V-Anvil Micrometers B-23,24
Limit Micrometers B-25
Pana Micrometers B-26
Spherical Face Micrometers B-27
Tube Micrometers B-28
Uni-Mike B-29
Uni-Mike B-29
Sheet Metal Micrometers B-30
Blade Micrometers B-31
Disk Micrometers B-32,34-35
Paper Thickness Micrometers B-33
Gear-Tooth Micrometers B-36
Screw Thread Micrometers B-37,38
MDC Micrometer
3-Wire Thread Measuring System B-39
Can Seam Micrometers B-40
Hub Micrometers B-41
Wire Micrometers B-41
Digital Outside Micrometers B-42
Indicating Micrometers B-43
Snap Meters B-43
MDH Micrometer Dial Snap Meters B-44
Caliper-Type Micrometers B-45
Groove Micrometers B-46
Small-Hole Gage Set B-47
Telescoping Gage Set B-47
Micrometer Stands B-48
Color Ratchet & Color Speeder B-49
QuantuMike Spindle Attachment Tip B-49
Micrometer Oil B-49
Optical Parallels B-50
Optical Flats B-50
Micrometer Standards B-51
Standards for Screw Thread Micrometers B-52
Digimatic Outside Standards for V-Anvil Micrometers B-52
Micrometer Tool Kits B-53,54
Micrometer Heads
Micrometer Head Selection Guide B-55
Digimatic Micrometer Heads B-56,57
Micrometer Heads B-58-72
Micro Jack B-72
Precision Lead Screw B-73
Fixtures for Micrometer Heads and Linear Gages B-74,75
Quick Guide to Precision Measuring Instruments B-76
Micro Jack B-72
Precision Lead Screw B-73
Micrometer Heads
fine spindle feed Fixtures for Micrometer Heads B-74,75

B-1
Coolant-proof Micrometer
SERIES 293 — with Dust/Water Protection Conforming to IP65 Level
0000040191

FEATURES
• IP65 protection level, enabling use in • Certificate of inspection* is included.
environments exposed to cutting oil, etc*. (2” /50mm or less range models)**
*Anti-corrosion treatment is required after use. *It is not the type used to obtain calibration certificates.
• Measurement data output function is ** except 293-349-30

available with a water-resistant connection • With a standard bar except for

cable. 0-1"/0-25mm model.
• Auto power ON/OFF function. •Supplied in fitted case. Plastic case up to
• A nonslip surface is employed for the 6"/150mm, wooden box over 6"/150mm.
frame cover and surface panel to achieve Employed nonslip
stable handheld measurement. surface

293-330-30

Certificate of inspection

293-252-30 Technical Data

Accuracy: Refer to the list of specifications.
Resolution: .00005"/0.001mm or 0.001mm (up to 4” models)
.0001” / 0.001mm (over 4” models)
Flatness: .000012”/0.3µm
Parallelism: .00004”/1µm for models up to 2”/50mm
.00008”/2µm for models up to 4”/100mm
.00012”/3µm for models up to 7”/175mm
.00016”/4µm for models up to 11”/275mm
.0002”/5µm for models over 12”/300mm
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 2.4 years under normal use
Dust/Water protection level: IP65

Function
Origin-set, Zero / ABS, Hold, Auto power on/off,
Data output (output models),
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error

Optional Accessories
05CZA662: SPC cable with data switch (40”/1m)
05CZA663: SPC cable with data switch (80”/2m)

Measurement data output function is available SPC cable with

with a water-resistant connection cable. data switch
Oil-resistant materials are used in all plastic
components.

B-2
 SPECIFICATIONS
Metric With ratchet stop Inch/Metric With ratchet stop
Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy
0 - 25mm 0.001mm 293-230-30 / 293-240-30* ±1µm 0 - 1" / 0 - 25.4mm .00005”/0.001mm 293-330-30 / 293-340-30* ±.00005"
25 - 50mm 0.001mm 293-231-30 / 293-241-30* ±1µm 1" - 2” / 25.4 - 50.8mm .00005”/0.001mm 293-331-30 / 293-341-30* ±.00005"
50 - 75mm 0.001mm 293-232-30 / 293-242-30* ±1µm 2" - 3" / 50.8 - 76.2mm .00005”/0.001mm 293-332-30 / 293-342-30* ±.00005"
75 - 100mm 0.001mm 293-233-30 / 293-243-30* ±2µm 3" - 4" / 76.2 - 101.6mm .00005”/0.001mm 293-333-30 / 293-343-30* ±.0001"
100 - 125mm 0.001mm 293-250-30 ±2µm 4" - 5" / 101.6 - 127.0mm .0001”/0.001mm 293-350-30 ±.0001"
125 - 150mm 0.001mm 293-251-30 ±2µm 5" - 6" / 127.0 - 152.4mm .0001”/0.001mm 293-351-30 ±.0001"
150 - 175mm 0.001mm 293-252-30 ±3µm 6" - 7" / 152.4 - 177.8mm .0001”/0.001mm 293-352-30 ±.00015"
175 - 200mm 0.001mm 293-253-30 ±3µm 7" - 8" / 177.8 - 203.2mm .0001”/0.001mm 293-353-30 ±.00015"
200 - 225mm 0.001mm 293-254-30 ±3µm 8" - 9" / 203.2 - 228.6mm .0001”/0.001mm 293-354-30 ±.00015"
225 - 250mm 0.001mm 293-255-30 ±4µm 9" - 10" / 228.6 - 254.0mm .0001”/0.001mm 293-355-30 ±.0002"
250 - 275mm 0.001mm 293-256-30 ±4µm 10" - 11" / 254.0 - 279.4mm .0001”/0.001mm 293-356-30 ±.0002"
275 - 300mm 0.001mm 293-257-30 ±4µm 11" - 12" / 279.4 - 304.8mm .0001”/0.001mm 293-357-30 ±.0002"
*without SPC data output *without SPC data output

Metric With ratchet thimble Inch/Metric With ratchet thimble

Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy
0 - 25mm 0.001mm 293-234-30 / 293-244-30* ±1µm 0 - 1” / 0 - 25.4mm .00005” / 0.001mm 293-334-30 / 293-344-30* ±.00005"
25 - 50mm 0.001mm 293-235-30 / 293-245-30* ±1µm 0 - 1" / 0 - 25.4mm .0001” / 0.001mm 293-349-30* ±.0001”
50 - 75mm 0.001mm 293-236-30 / 293-246-30* ±1µm 1" - 2"/ 25.4 - 50.8mm .00005” / 0.001mm 293-345-30* ±.00005"
75 - 100mm 0.001mm 293-237-30 / 293-247-30* ±2µm 2" - 3" / 50.8 - 76.2mm .00005” / 0.001mm 293-346-30* ±.00005"
*without SPC data output 3" - 4" / 76.2 - 101.6mm .00005” / 0.001mm 293-347-30* ±.0001"
*without SPC data output

Metric Micrometer Set Inch/Metric With friction thimble

Range Order No. Included in set Range Resolution Order No. Accuracy
0-50mm 293-966-30 293-230-30, 293-231-30, 25mm CERA 0 - 1" / 0 - 25.4mm .00005” / 0.001mm 293-335-30 / 293-348-30* ±.00005"
(2pcs. Set) block, plastic case
1" - 2"/ 25.4 - 50.8mm .00005” / 0.001mm 293-336-30 ±.00005"
0-75mm 293-962-30 293-230-30, 293-231-30, 293-232-30,
(3pcs. Set) 2 standard bars, plastic case *without SPC data output
b L 25 2 48.5 62.9
0-100mm 293-963-30 293-230-30, 293-231-30,

10.8
(4pcs. Set) 293-232-30, 293-233-30, 3 standard Inch/Metric Micrometer Set .00005" / 0.001mm graduation model
bars, wooden box Range Order No. Included in set
a 0 - 3” / 0 - 76.2mm 293-960-30 293-330-30, 293-331-30, 293-332-30,
(3 pcs. set) 2 standard bars, plastic case

ø18
ø6.35
c

0 - 4" / 0 - 101.6mm 293-961-30 293-330-30, 293-331-30,

(4 pcs. set) 293-332-30, 293-333-30,
3 standard bars, wooden box

DIMENSIONS AND MASS

Ratchet-stop type (up to 100mm/4”) Ratchet-thimble type and friction-thimble type Unit: mm

63.6
b L 25 2 48.5 62.9
10.8

b L 30.7 42.5 2.3 3 43 17 44 4.2

a
a
ø19.3
ø18
ø6.35
ø6.35
c

ø18

ø18
c

Range (Metric / Inch) L a b c Mass (g)

2.3
b L 14.5 2 47.2 3 43 17 0 - 25mm / 0-1” 0 2.5 9 (25) 270
63.6
a 27.5 25 - 50mm / 1-2” 25 2.5 9.8 (32.5) 330
50 - 75mm / 2-3” 50 2.5 12.6 (47) 470
ø18

75 - 100mm / 3-4” 75 2.5 14 (60) 625

ø6.35

100 - 125mm / 4-5” 132.8 5.3 16.7 (76.5) 600

ø19.3

125 - 150mm / 5-6” 158.2 5.7 18.8 (91) 740

C

150 - 175mm / 6-7” 183.6 6.1 19.1 (103.1) 800

175 - 200mm / 7-8” 208.8 6.3 18.2 (115.3) 970
200 - 225mm / 8-9” 234.2 6.7 16.8 (126.8) 1100
225 - 250mm / 9-10” 258 5.5 18 (139.8) 1270
250 - 275mm / 10-11" 284 18 28 (152.3) 1340
275 - 300mm / 11-12" 309 18 28 (166) 1540

Ratchet stop type (over 100mm/4” to 300mm/12”)

B-3
Digimatic Micrometer
SERIES 293 Technical Data
Accuracy: Refer to the list of specifications.
Resolution: .0001"/0.001mm or 0.001mm
Flatness: .000024” / 0.6µm
Parallelism: .0002”/ 5µm for models up to 15”/ 375mm
.00024”/ 6µm for models up to 19”/ 475mm
.00028”/ 7µm for models over 20”/ 500mm
Measuring faces: Carbide tipped
293-582 Display: LCD
SPECIFICATIONS Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 1.8 years under normal use
Metric With ratchet stop
Range Resolution Order No. Accuracy Function
300 - 325mm 0.001mm 293-582 ±6µm Preset, Zero-setting, Power ON/OFF, Data hold, Data output,
325 - 350mm 0.001mm 293-583 ±6µm inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error
350 - 375mm 0.001mm 293-584 ±6µm
DIMENSIONS 375 - 400mm 0.001mm 293-585 ±7µm Optional Accessories
400 - 425mm 0.001mm 293-586 ±7µm 959149: SPC cable (40”/1m) Straight type
Unit: mm
425 - 450mm 0.001mm 293-587 ±7µm 959150: SPC cable (80”/2m) Straight type
28 L 28 2 55 3 50 17
18 35 450 - 475mm 0.001mm 293-588 ±8µm 04AZB512: SPC cable L-type (40”/1m)
04AZB513: SPC cable L-type (80”/2m)
ф21
ф12

5
475 - 500mm 0.001mm 293-589 ±8µm
ф8

Inch/Metric With ratchet stop

ａ

330°
Range Resolution Order No. Accuracy
Range L a Mass(g) 12" - 13" / 304.8 - 330.2mm .0001" / 0.001mm 293-782 ±.0003"
300 - 325mm/12-13” 353 187 2000 13" - 14" / 330.2 - 355.6mm .0001" / 0.001mm 293-783 ±.0003"
325 - 350mm/13-14” 378 199 2150
14" - 15" / 355.6 - 381.0mm .0001" / 0.001mm 293-784 ±.0003"
350 - 375mm/14-15” 403 212 2300
b
375 - 400mm/15-16”
L
428
28 2
224
55
2450
3 50 17 15" - 16" / 381.0 - 406.4mm .0001" / 0.001mm 293-785 ±.00035"
a 35
400 - 425mm/16-17” 453 236 2600 16" - 17" / 406.4 - 431.8mm .0001" / 0.001mm 293-786 ±.00035"
425 - 450mm/17-18” 478 248 2750 17" - 18" / 431.8 - 457.2mm .0001" / 0.001mm 293-787 ±.00035"
φ12

450 - 475mm/18-19” 503 261 2900

φd

18" - 19" / 457.2 - 482.6mm .0001" / 0.001mm 293-788 ±.0004"

φ21

5
475 - 500mm/19-20” 528 273 3100
c

19" - 20" / 482.6 - 508.0mm .0001" / 0.001mm 293-789 ±.0004"

330°

Digimatic Micrometer
SERIES 293 MDC-Lite
FEATURES
• Provided only with zero set and in/mm
(inch/metric models only) keys.
• A ratchet stop or friction thimble for a 293-831-30
constant measuring force. Technical Data
Accuracy: Refer to the list of specifications
• Measurement readout with large Resolution: .00005"/0.001mm or 0.001mm
characters on the LCD. Flatness: .000012” / 0.3µm
Parallelism: .00008” / 2µm
• No spindle clamp. No data output. Measuring faces: Carbide tipped
• Supplied in fitted plastic case. Display: LCD
Battery: SR44 (1 pc.), 938882
Inch/Metric With ratchet stop Battery life: Approx. 2.4 years under normal use
SPECIFICATIONS Range Resolution Order No. Accuracy
Metric With ratchet stop 0 - 1" / 0 - 25.4mm .00005" / 0.001mm 293-831-30 ±.0001" Function
Origin-set, Automatic power on/off,
Range Resolution Order No. Accuracy inch/mm conversion (on inch/metric models only)
0 - 25mm 0.001mm 293-821-30 ±2µm Inch/Metric With friction thimble Alarm: Low voltage, Counting value composition error
Range Resolution Order No. Accuracy
0 - 1" / 0 - 25.4mm .00005" / 0.001mm 293-832-30 ±.0001"
DIMENSIONS AND MASS
Unit: mm
Ratchet stop
Ratchet stop
9 25 2 9 48.5
30.7 42.5
2.3
633 43 17
Friction thimble
10.8

2.5 146.1

2.5
ø6.35
26

ø18
26
ø6.35

ø18
(58.5)

MASS: 270g

B-4
 MDH Micrometer
SERIES 293 — High-Accuracy Sub-Micron Digimatic Micrometer
Technical Data
Flatness: 0.3µm/.000012” FEATURES
Parallelism: 0.6µm/.000024
Measuring force: 7 to 9N • Enabling .000005”/ 0.1μm resolution • Body heat transferred to the instrument
measurement, this micrometer is ideal for is reduced by a (removable) heat shield,
Functions customers who need to make highly accurate minimizing the error caused by thermal
Preset (ABS measurement system) measurements with a handheld tool.
Zero-setting (INC measurement system) expansion of the frame when performing
Hold, Resolution switching, Function lock, On/off, Auto • A highly rigid frame and high-performance handheld measurements.
power off, Measurement data output, Error alarm constant-force mechanism* enable • The ABS (absolute) rotary sensor also
more stable measurements, while the eliminates the need to perform origin
Optional Accessories
05CZA662: SPC cable with data switch (1m/40”) clicks emitted while the workpiece is setting each time the power is turned on,
05CZA663: SPC cable with data switch (2m/80”) being measured assure the operator that letting you start measuring right away.
measurement is proceeding normally. With no possibility of overspeed errors, the
* Patent pending in Japan, the United States of High-Accuracy Digimatic Micrometer also
America, the European Union and China. delivers a high level of reliability.

293-130-10

Function lock

"d2" is the name for Mitutoyo Digimatic

output compatible with up to 8 digits of I/O data.
SPECIFICATIONS
Heat shield Metric
Order No. Range Resolution Accuracy Measuring surface Mass
0.0001mm/ 0.0005mm 400g
293-100-10 0 - 25mm (switchable) ±0.5μm ø3.2mm (440g w/Heat shield)

Inch/Metric
Order No. Range Resolution Accuracy Measuring surface Mass
.000005"/.00002"
0 - 1" 400g
293-130-10 0 - 25.4mm 0.0001mm/0.0005mm ±.00002" ø3.2mm (440g w/Heat shield)
(switchable)

DIMENSIONS
Unit: mm
13.5 25 4 50.4 72.7
ø6.35

15.8
ø3.2

2.5
24

ø25

58.9

Dimensions shown
178 without heat shield

B-5
QuantuMike
SERIES 293 — Coolant-proof Micrometer
ID 0000040191
4011207400

FEATURES
• Faster measurement with 2mm per • IP-65 protection level.
revolution instead of the standard 0.5mm. • Certificate of inspection provided.
• A patented ratchet thimble mechanism • With a standard bar except for
helps ensure repeatability. 0-25mm/0-1" model.
• A function lock helps prevent error. • Supplied in fitted plastic case. Certificate of inspection provided for 0-1"
and 1-2" models only.

Technical Data
Accuracy: Refer to the list of specifications
Resolution: 0.001mm or .00005"/0.001mm
293-180-30 Flatness: 0.3µm/.000012”
Parallelism: 1µm/.00004” for models up to 50mm/2”
2µm/.00008” for models up to 100mm/4”
Measuring force: 7-12N
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 2.4 years under normal use
Dust/Water protection level: IP65

Function
293-187-30 Origin-set, Zero / ABS, Hold, Function lock, Auto power on/off,
Data output (output models),
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error

Optional Accessories
05CZA662: SPC cable with data switch (1m/40”)
05CZA663: SPC cable with data switch (2m/80”)

SPECIFICATIONS
Metric Inch/Metric
SPC cable with
Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy data switch
0-25mm 0.001mm 293-140-30 1µm 0-1”/0 - 25.4mm .00005”/0.001mm 293-180-30 .00005”
0-25mm 0.001mm 293-145-30* 1µm 0-1”/0 - 25.4mm .00005”/0.001mm 293-185-30* .00005” 516-529-26 Inspection Gage Block Set
25-50mm 0.001mm 293-141-30 1µm 1-2”/25.4 - 50.8mm .00005”/0.001mm 293-181-30 .00005” Rectangular Steel Gage Block
10 pc. blocks and 1 pc. optical parallel
25-50mm 0.001mm 293-146-30* 1µm 1-2”/25.4 - 50.8mm .00005”/0.001mm 293-186-30* .00005”
50-75mm 0.001mm 293-142-30 2µm 2-3”/50.8 - 76.2mm .00005”/0.001mm 293-182-30 .0001” 516-319-26 Inspection Gage Block Set
50-75mm 0.001mm 293-147-30* 2µm 2-3”/50.8 - 76.2mm .00005”/0.001mm 293-187-30* .0001” Rectangular Cera Gage Block
10 pc. blocks and 1 pc. optical parallel
75-100mm 0.001mm 293-143-30 2µm 3-4”/76.2 - 101.6mm .00005”/0.001mm 293-183-30 .0001”
75-100mm 0.001mm 293-148-30* 2µm 3-4”/76.2 - 101.6mm .00005”/0.001mm 293-188-30* .0001”
* without SPC data output * without SPC data output

DIMENSIONS AND MASS Ratchet-induced

microvibrations along
the spindle help
Ratchet on thimble Ratchet on speeder ensure repeatable
a L 27 48.5 3 37.5 23.1 Unit: mm measurements.
2.8

Significant reduction in positioning time

Time needed to measure a multi-stepped
ø6.35

Time [s] cylindrical workpiece (with one hand)

ø19.3

60
b

53 sec. ■■ Positioning time

Range L a b Mass(g) 50 ■■ Measuring time
0-25mm/0-1" 0 9 25 265
40
25-50mm/1-2" 25 9.8 32 325
50-75mm/2-3" 50 12.6 47 465 30 41 sec.

75-100mm/3-4" 75 14 60 620 22 sec.

Model=25-50mm/1-2” 20
10 sec.
10
12 sec. 12 sec.
0
Conventional model QuantuMike

B-6
 ABSOLUTE Digimatic Micrometers
SERIES 227 — with Adjustable Measuring Force

FEATURES • Non-rotating spindle and the new ratchet

• Constant and low measuring force friction thimble.
mechanism in the thimble. • Speedy spindle feed by .4”/rev and
• Adjustable measuring force* 10mm/rev for inch/metric model.
accommodates various types of work • With absolute linear scale.
Technical Data
Accuracy: Refer to the list of specifications materials. • With SPC data output.
Resolution: .00005"/0.001mm or 0.001mm *0.5-2.5N or 2-10N • With a standard bar to set the origin point
Flatness: .000012” / 0.3µm • The measurement-value hold function (except for 0-15mm, 0-10mm, 0-.6”, and
Parallelism: .00008” / 2µm
Accuracy of selected measuring force: automatically retains the data at a specified 0-.4” models).
± (0.1+selected measuring force/10)N measuring force, ensuring accuracy. • Supplied in fitted plastic case.
for 0.5-2.5N models
± (0.4+selected measuring force/10)N
for 2-10N models

Measuring faces: Carbide tipped

Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year for .6 - 1.2” / 15-30mm, .4 -.8”/ 227-201
10-20mm, .8-1.2”/20-30mm range model)

Function
Origin, Hold / Data, ON/OFF, Zero / ABS,
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error
SPECIFICATIONS
Optional Accessories Metric
937387: SPC cable (40”/ 1m)
965013: SPC cable (80”/ 2m) Order No. Range Resolution Accuracy Measuring Force Mass(g)
227-201 0-15mm 0.001mm ±2µm 0.5-2.5 (0.5, 1.0, 1.5, 2, 2.5) N 300
227-203 15-30mm 0.001mm ±2µm 0.5-2.5 (0.5, 1.0, 1.5, 2, 2.5) N 380
227-205 0-10mm 0.001mm ±2µm 2-10 (2, 4, 6, 8, 10) N 340
227-206 10-20mm 0.001mm ±2µm 2-10 (2, 4, 6, 8, 10) N 425
227-207 20-30mm 0.001mm ±2µm 2-10 (2, 4, 6, 8, 10) N 415

Inch/Metric
Order No. Range Resolution Accuracy Measuring Force Mass(g)
227-211 0-.6" .00005"/0.001mm ±.0001" 0.5-2.5 (0.5, 1.0, 1.5, 2, 2.5) N 300
227-213 .6-1.2" .00005"/0.001mm ±.0001" 0.5-2.5 (0.5, 1.0, 1.5, 2, 2.5) N 380
227-215 0-.4" .00005"/0.001mm ±.0001" 2-10 (2, 4, 6, 8, 10) N 340
227-216 .4-.8" .00005"/0.001mm ±.0001" 2-10 (2, 4, 6, 8, 10) N 425
227-217 .8-1.2" .00005"/0.001mm ±.0001" 2-10 (2, 4, 6, 8, 10) N 415

DIMENSIONS AND MASS

9 32 69.6 54 18.1 Unit: mm
a L b 4
ø24.5
2.0
1.0

N
0.5
1.5
2.5

Range L a b
ø6.35
25

0 - 15mm 15 2 17
0 - 10mm 10 2 22
2.0
1.0

N
0.5
1.5
2.5

Stroke-limiting bush Measuring force control

8.5 63.8 65.6 54 18.1

a L b
ø24.5
2.0

Range
1.0

L a b
N
0.5
1.5
2.5

15 - 30mm 30 12.8 17
36

10 - 20mm 20 17.8 22
20 - 30mm 30 7.8 22
2.0
1.0

N
0.5
1.5
2.5

Measuring force control

Stroke-limiting bush

B-7
Quickmike
SERIES 293 — IP-54 ABSOLUTE Digimatic Micrometers

The Quickmike provides a speedy spindle FEATURES

feed of 10mm / .4” per thimble rotation as • Non-rotating spindle and the new ratchet
compared to the conventional micrometer friction thimble.
with 0.5mm / .025” per rotation. Its wide • Speedy spindle feed by 10mm/rev and
30mm / 1.2” measuring range allows .4”/rev for inch/metric models.
various workpieces with different shapes to • With absolute linear scale.
be measured quickly. • IP54 dust/water protection (when not
connected with data output cable).
• With SPC data output.
• With a standard bar to set the origin point
(for models with a range over 30mm / 1.2”). Technical Data
• Supplied in fitted plastic case. Accuracy: Refer to the list of specifications
Resolution: 0.001mm or .00005"/0.001mm
Flatness: 0.3µm / .000012”
Parallelism: 2µm / .00008” for models up to 80mm / 3.2”
3µm / .00012” for models up to 105mm / 4.2”
Measuring force: 5-10N
Measuring faces: Carbide tipped
293-676 293-677 Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year for models over 30mm / 1.2”)
Dust/Water protection level: IP54

293-678
293-679

SPECIFICATIONS
Metric Inch/Metric Function
Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy Origin, Hold / Data, ON/OFF, Zero / ABS,
0 - 30mm 0.001mm 293-666 ±2µm 0 - 1.2" / .00005" / 293-676 ±.0001" inch/mm conversion (on inch/metric models only)
25 - 55mm 0.001mm 293-667 ±2µm 0 - 30.48mm 0.001mm Alarm: Low voltage, Counting value composition error
50 - 80mm 0.001mm 293-668 ±3µm 1" - 2.2" / .00005" / 293-677 ±.0001"
75 - 105mm 0.001mm 293-669 ±3µm 25.4 - 55.88mm 0.001mm ABSOLUTE scale Quick feeding
with origin point mechanism
2" - 3.2" / .00005" / 293-678 ±.00015"
Lead screw
50.8 - 81.28mm 0.001mm Scale 10mm/rev.
Detector
3" - 4.2" / .00005" / 293-679 ±.00015"
76.2 - 106.68mm 0.001mm
DIMENSIONS AND MASS
b L 69.6 3.3 42.9 4.2 Unit: mm
a
ø6.35

ø24.9

Optional Accessories
937387: SPC cable (1m / 40”)
c

Range L a b c Mass 965013: SPC cable (2m / 80”)

0 - 30mm / 0 - 1.2" 34.8 2.8 6.2 25 275
25 - 55mm / 1 - 2.2" 59.8 2.8 8.5 36 355
50 - 80mm / 2 - 3.2" 84.8 2.8 10.3 47 525
75 - 105mm / 3 - 4.2" 109.8 2.8 10.7 60 625

B-8
 Outside Micrometers
SERIES 101

Technical Data FEATURES

Graduation: .0001"
Flatness: .000024" • Satin chrome-finished frame, tapered • With a standard bar except for 0 - 1"
Parallelism: .00008" for models up to 3" (on the anvil side) for hard-to-reach places. models.
.00012" for models over 3"
Measuring faces: Carbide tipped • Supplied in fitted plastic case.

101-113

101-114

SPECIFICATIONS
Inch With friction thimble Inch With ratchet stop
20 14.5 3 37 17 Range Graduation Order No. Accuracy Mass (g)
Range Graduation Order No. Accuracy Mass (g)
0 - 1" .0001" 2.5 17.5±.0001"
101-117* 180 0 - 1" .0001" 101-113* ±.0001" 180
ø6.35

1 - 2" .0001" 101-118* ±.0001" 245 1 - 2" .0001" 101-114* ±.0001" 245
*.0001" reading is obtained with vernier. 2 - 3" .0001" 101-119* ±.0001" 410
3 - 4" .0001" 101-120* ±.00015" 550
19.5

ø15

*.0001" reading is obtained with vernier.

DIMENSIONS

Unit: inch
b L .57.12 1.85 .67
1.08
ø.71

a
ø.25

Range L a b c
0 - 1" 1.18 .10 .20 1.10
1 - 2" 2.16 .08 .31 1.28
c

2 - 3" 3.19 .11 .33 1.77

3 - 4" 4.19 .11 .33 2.28
Note: The shape of the thimble changes
on the model with friction thimble.

B-9
Ratchet Thimble Micrometer
SERIES 102 — New smoother action ratchet thimble

FEATURES
• Ratchet function works both from the
thimble and the speeder, allowing easy
one-handed operation.
• Clearly audible ratchet operation for Thimble
sleeve
Speeder
sleeve
reassurance that measurement is being
performed at constant, preset force. Technical Data
• Heat insulating frame minimizes thermal Graduation: 0.01mm, 0.001mm, .001" or .0001"
expansion. Flatness: 0.6µm / .000024”
Parallelism: 2µm / .00008”
• Provided with a Certificate of Inspection. Measuring faces: Carbide tipped
• With a standard bar except for 0 - 25mm 102-701
Measuring force: 5-10N
and 0 - 1” models.
• Supplied in fitted plastic case.

Rotating the thimble/speeder sleeve when the workpiece is between the

anvil and spindle causes the ratchet mechanism to tap the spindle and
apply a constant measuring force to the workpiece.
Thimble sleeve Speeder sleeve

102-702

Ratchet mechanism

SPECIFICATIONS
Metric Inch
Range Graduation Order No. Accuracy Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 102-701 ±2µm 0 - 1" .0001" 102-717* ±.0001"
0 - 25mm 0.001mm 102-707* ±2µm 1 - 2" .0001" 102-718* ±.0001"
25 - 50mm 0.01mm 102-702 ±2µm *.0001" reading is obtained with vernier.
25 - 50mm 0.001mm 102-708* ±2µm
*0.001mm reading is obtained with vernier.

DIMENSIONS AND MASS

Unit: mm
5 30.3 14.5 3 15 50
2.8 27.5 25-50mm model / 1 - 2 “ model
8 55.3
ø6.35

2.8 25 27.5
ø19

30

7
26.5

0-25mm / 0 - 1”: 180g

25-50mm / 1 - 2”: 270g

11

B-10
 Outside Micrometers
SERIES 102

FEATURES
• Heat-insulated frame, tapered (on the anvil • A ratchet stop for a constant measuring
side) for hard-to-reach places. force.
• With a standard bar except for 0 - 25mm • Supplied in a fitted plastic case.
Technical Data model.
Graduation: 0.01mm
Flatness: 0.3µm
Parallelism: 1µm for 25mm model
3µm for models up to 100mm
Measuring faces: Carbide tipped

102-301

Ratchet-stop type

SPECIFICATIONS
Metric With ratchet stop
Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 102-301 ±2µm
25 - 50mm 0.01mm 102-302 ±2µm
50 - 75mm 0.01mm 102-303 ±2µm
75 - 100mm 0.01mm 102-304 ±3µm

Metric Micrometer set 0.01mm Graduation model

Range Order No. Included in set
0 - 100mm 102-911-40 • 102-301
(4 pcs/set) 102-302
102-303
102-304
• 3 micrometer standards

DIMENSIONS AND MASS

b L 15 3 47 17 Unit: mm
a
ø18
ød
c

Range L a b c d Mass (g)

0 - 25mm 30.3 2.8 5 26 6.35 180
25 - 50mm 55.3 2.8 8 32 6.35 270
50 - 75mm 80.3 2.8 9 45 6.35 375
75 - 100mm 105.3 2.8 10 58 6.35 490

B-11
Outside Micrometers
SERIES 103

FEATURES
• Hammertone, baked-enamel-finished • With a standard bar except for 0-25mm
frame. model.
• Ratchet stop for exact repetitive readings.
Technical Data
Graduation: 0.01mm, 0.001mm
Flatness: 0.6 µm for models up to 300mm/12"
1µm for models over 300mm/12"
Parallelism: (2+R/100)µm, R=max, range (mm)
Measuring faces: Carbide tipped

103-137

SPECIFICATIONS
Metric With ratchet stop DIMENSIONS AND MASS
Range Order No. Accuracy Mass (g) Up to 300mm / 12" Over 300mm / 12"
0 - 25mm 103-137 ±2µm 175 b L 15 3 47 17 b L 28 3 50 17
103-129* ±2µm 175 a 27.5 a 35

ø12

ø21
25 - 50mm 103-138 ±2µm 215
103-130* ±2µm 215

ø8
ø6.35

5
50 - 75mm 103-139-10 ±2µm 315

c
c

75 - 100mm 103-140-10 ±3µm 375

100 - 125mm 103-141-10 ±3µm 515
125 - 150mm 103-142-10 ±3µm 665
150 - 175mm 103-143-10 ±4µm 720
175 - 200mm 103-144-10 ±4µm 920
Range L a b c Range L a b c
200 - 225mm 103-145-10 ±4µm 1080
0 - 25mm / 0 - 1" 30.3 2.8 9 28 300 - 325mm / 12-13" 353 18 28 187
225 - 250mm 103-146-10 ±5µm 1255
25 - 50mm / 1 - 2" 55.3 2.8 10 38 325 - 350mm / 13-14" 378 18 28 199
250 - 275mm 103-147-10 ±5µm 1405 50 - 75mm / 2 - 3" 80.3 2.8 12 49 350 - 375mm / 14-15" 403 18 28 212
275 - 300mm 103-148-10 ±5µm 1565 75 - 100mm / 3 - 4" 105.3 2.8 14 60 375 - 400mm / 15-16" 428 18 28 224
300 - 325mm 103-149 ±6µm 1985 100 - 125mm / 4 - 5" 132.8 5.3 17 79 400 - 425mm / 16-17" 453 18 28 236
325 - 350mm 103-150 ±6µm 2155 125 - 150mm / 5 - 6" 158.2 5.7 19 94 425 - 450mm / 17-18" 478 18 28 248
350 - 375mm 103-151 ±6µm 2305 150 - 175mm / 6 - 7" 183.6 6.1 20 106 450 - 475mm / 18-19" 503 18 28 261
375 - 400mm 103-152 ±7µm 2455 175 - 200mm / 7 - 8" 208.8 6.3 19 118 475 - 500mm / 19-20" 528 18 28 273
400 - 425mm 103-153 ±7µm 2715 200 - 225mm / 8 - 9" 234.2 6.7 18 130
225 - 250mm / 9 - 10" 258 5.5 18 143
425 - 450mm 103-154 ±7µm 2965
250 - 275mm / 10 - 11" 284 6.5 18 156
450 - 475mm 103-155 ±8µm 3215
275 - 300mm / 11 - 12" 309 6.5 18 169
475 - 500mm 103-156 ±8µm 3450
(Models with a range up to 1000mm are available.)
*0.001mm reading is obtained with vernier.

Metric Micrometer set

Range Order No. Included in set Mass (g)
0 - 75mm (3 pc. set) 103-927-10 103-137, 103-138, 103-139-10, 2 micrometer 750
standards
0 - 150mm 103-913-50 103-137, 103-138, 103-139-10, 103-140-10, 103- 2260
(6 pc. set) 141-10, 103-142-10, 5 micrometer standards
150 - 300mm 103-915-10 103-143-10, 103-144-10, 103-145-10, 103-146-10, 7695
(6 pc. set) 103-147-10, 103-148-10, 6 micrometer standards
0 - 300mm 103-914-50 All micrometers of 103-913-50 and 103-915-10 in one 9300
(12 pc. set) set, 11 micrometer standards

B-12
 Outside Micrometers
SERIES 103— Inch Models

FEATURES
• Hammertone, baked-enamel-finished • With a standard bar except for 0-1”model.
frame.
• Ratchet stop or friction thimble for exact
repetitive readings.

103-177

103-260

Technical Data (Inch Model)

Accuracy: Refer to the list of specifications SPECIFICATIONS
Graduation: .001" or .0001" Inch With ratchet stop
Flatness: .000024” for models up to 12”
.00004” for models over 12” Range Graduation Order No. Accuracy Mass (g)
Parallelism: [.00008 + .00004 (L/4)]” L= max range (inch) 0 - 1" .001" 103-177 ±.0001" 175
Measuring faces: Carbide tipped 1 - 2" .001" 103-178 ±.0001" 215
2 - 3" .001" 103-179 ±.0001" 315
3 - 4" .001" 103-180 ±.00015" 375
4 - 5" .001" 103-181 ±.00015" 515 Inch With friction thimble
5 - 6" .001" 103-182 ±.00015" 665 Range Graduation Order No. Accuracy Mass (g)
6 - 7" .001" 103-183 ±.0002" 720 0 - 1" .0001" 103-135* ±.0001" 175
7 - 8" .001" 103-184 ±.0002" 920 1 - 2" .0001" 103-136* ±.0001" 215
8 - 9" .001" 103-185 ±.0002" 1080 * .0001" Reading is obtained with vernier
9 - 10" .001" 103-186 ±.00025" 1255
10 - 11" .001" 103-187 ±.00025" 1405
11 - 12" .001" 103-188 ±.00025" 1565
12 - 13" .001" 103-189 ±.0003" 1985 Inch With ratchet stop
13 - 14" .001" 103-190 ±.0003" 2155 Range Graduation Order No. Accuracy Mass (g)
14 - 15" .001" 103-191 ±.0003" 2305 0 - 1" .0001" 103-131* ±.0001" 175
15 - 16" .001" 103-192 ±.00035" 2455 1 - 2" .0001" 103-132* ±.0001" 215
16 - 17" .001" 103-193 ±.00035" 2715 2 - 3" .0001" 103-217* ±.0001" 315
17 - 18" .001" 103-194 ±.00035" 2965 3 - 4" .0001" 103-218* ±.00015" 375
18 - 19" .001" 103-195 ±.0004" 3215 4 - 5" .0001" 103-219* ±.00015" 515
19 - 20" .001" 103-196 ±.0004" 3450 5 - 6" .0001" 103-220* ±.00015" 665
20 - 21" .001" 103-197 ±.0004" 4060 6 - 7" .0001" 103-221* ±.0002" 720
21 - 22" .001" 103-198 ±.00045" 4080 7 - 8" .0001" 103-222* ±.0002" 920
22 - 23" .001" 103-199 ±.00045" 4500 8 - 9" .0001" 103-223* ±.0002" 1080
23 - 24" .001" 103-200 ±.00045" 4525 9 - 10" .0001" 103-224* ±.00025" 1255
24 - 25" .001" 103-201 ±.0005 4915 10 - 11" .0001" 103-225* ±.00025" 1405
25 - 26" .001" 103-202 ±.0005" 4930 11 - 12" .0001" 103-226* ±.00025" 1565
26 - 27" .001" 103-203 ±.0005" 5200 * .0001" Reading is obtained with vernier
27 - 28" .001" 103-204 ±.00055" 5215
28 - 29" .001" 103-205 ±.00055" 5835 Inch With Tapered Frame and Ratchet Stop
29 - 30" .001" 103-206 ±.00055" 5860
Range Graduation Order No. Accuracy Mass (g)
30 - 31" .001" 103-207 ±.0006" 6385
0-1" .001" 103-259 ±.0001" 175
31 - 32" .001" 103-208 ±.0006" 6410
0-1" .0001" 103-260* ±.0001" 175
32 - 33" .001" 103-209 ±.0006" 6925
1-2" .0001" 103-262* ±.0001" 215
33 - 34" .001" 103-210 ±.00065" 6940
* .0001" Reading is obtained with vernier
34 - 35" .001" 103-211 ±.00065" 7565
35 - 36" .001" 103-212 ±.00065" 7590
36 - 37" .001" 103-213 ±.0007" 8215
37 - 38" .001" 103-214 ±.0007" 8240
38 - 39" .001" 103-215 ±.0007" 8860
39 - 40" .001" 103-216 ±.00075" 8880

B-13
Outside Micrometers
SERIES 103 — Inch model set

Inch Micrometer Set .001” Graduation Model

Range Order No. Included in set Mass (g)
0 - 3" (3pcs./set) 103-929 103-177, 103-178, 103-179, 2 Micrometer Standards 750
0 - 4" (4pcs./set) 103-930 103-177, 103-178, 103-179, 103-180, 3 Micrometer Standards 1600
0 - 6" (6pcs./set) 103-904-10 103-177, 103-178, 103-179, 103-180, 103-181, 103-182, 2200
5 Micrometer Standards
0 - 12" (12pcs./set) 103-905-10 103-177, 103-178, 103-179, 103-180, 103-181, 103-182, 103-183, 103-184, 9000
103-185, 103-186, 103-187, 103-188, 11 Micrometer Standards
6 - 12" (6pcs./set) 103-906 103-183, 103-184, 103-185, 103-186, 103-187, 103-188, 7695
6 Micrometer Standards

103-905-10

Inch Micrometer Set .0001” Graduation Model

Range Order No. Included in set Mass (g)
0 - 3" (3pcs./set) 103-922 103-135, 103-136, 103-217, 2pcs. Micrometer Standards 705
0 - 4" (4pcs./set) 103-931 103-135, 103-136, 103-217, 103-218, 3pcs. Micrometer Standards 1600
0 - 6" (6pcs./set) 103-907-40 103-135, 103-136, 103-217, 103-218, 103-219, 103-220, 2200
5 Micrometer Standards
0 - 12" (12pcs./set) 103-908-40 103-135, 103-136, 103-217, 103-218, 103-219, 103-220, 103-221, 103-222, 9000
103-223, 103-224, 103-225, 103-226, 11pcs. Micrometer Standards
6 - 12" (6pcs./set) 103-909 103-221, 103-222, 103-223, 103-224, 103-225, 103-226, 6945
6pcs. Micrometer Standards

103-904-10

B-14
 Outside Micrometers
SERIES 340, 104 — with Interchangeable Anvils, Inch model
0000040191

FEATURES
• IP65 water/dust protection (Series 340*). • Supplied with zero-setting standards bar
*Models with a range up to12” / 300mm.
for each range.
• Wide measuring range with • With SPC output (Series 340).
interchangeable anvils. • Supplied in fitted wooden case.
• With a ratchet stop for constant force.
Technical Data
Accuracy: ±[.00016” +.00004 (L/3)”] L = Max Range (Inch)
Resolution*: .0001"/0.001mm
(340-351-30: .00005"/0.001mm)
Graduation**: .001” (104-165: is .0001”)
Flatness: .000024” for models up to 12”
.00004” for models over 12”
Parallelism: .00008” for models up to 3”
.00012” for models up to 6”
±[.00008” + .00004 (L/4)”] L= Max range (inch)
Measuring faces: Carbide tipped (spindle only) 340-352-30
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years (1.8 years for models over
300mm) years under normal use
Dust/Water protection level*: IP65 (up to 12” / 300mm)
*Digital models **Analog models

Function of Digital Model

Zero / ABS, Data hold, Preset, Data output,
inch/mm conversion (on inch/metric models only)
Function Lock, 2 Presets
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model SPECIFICATIONS

05CZA662: SPC cable with data switch (40” / 1m) Inch/Metric
05CZA663: SPC cable with data switch (80” / 2m) Digital model
959149: SPC cable Straight type (40”/1m)* Range Resolution Order No. Mass (kg) Remarks
959150: SPC cable Straight type (80”/2m)* 0-6" / .00005" / 340-351-30 0.96 with 6 anvils & 5 standards
04AZB512: SPC cable L-type (40”/1m)* 0-152.4mm 0.001mm
04AZB513: SPC cable L-type (80”/2m)* 6-12" / .0001" / 340-352-30 1.88 with 6 anvils & 6 standards
* models over 300mm 152.4 - 304.8mm 0.001mm
12-18" / .0001" / 340-720 4.75 with 6 anvils & 6 standards
304.8 - 457.2mm 0.001mm
18-24" / .0001" / 340-721 6.62 with 6 anvils & 6 standards
457.2 - 609.6mm 0.001mm
24-30" / .0001" / 340-722 10.06 with 6 anvils & 6 standards
609.6 - 762.0mm 0.001mm
30-36" / .0001" / 340-723 11.98 with 6 anvils & 6 standards
762.0 - 914.4mm 0.001mm

Inch
Range Graduation Order No. Mass(kg) Remarks
0-2” .0001” 104-165* 0.32 with 1” anvil & 1 standard
0-6” .001” 104-137 1.35 with 6 anvils & 5 standards
6-12” .001” 104-138 2.65 with 6 anvils & 6 standards
12-16” .001” 104-152 3.31 with 4 anvils & 4 standards
12-18” .001” 104-201 4.69 with 6 anvils & 6 standards
16-20” .001” 104-153 4.81 with 4 anvils & 4 standards
18-24” .001” 104-202 6.51 with 6 anvils & 6 standards
20-24” .001” 104-154 6.35 with 4 anvils & 4 standards
24-28” .001” 104-155 7.72 with 4 anvils & 4 standards
24-30” .001” 104-203 9.95 with 6 anvils & 6 standards
28-32” .001” 104-156 9.08 with 4 anvils & 4 standards
30-36” .001” 104-204 11.87 with 6 anvils & 6 standards
32-36” .001” 104-157 10.41 with 4 anvils & 4 standards
36-40” .001” 104-158 11.78 with 4 anvils & 4 standards
36-42” .001” 104-205 13.68 with 6 anvils & 6 standards
*.0001" reading is obtained with vernier.

B-15
Outside Micrometers
SERIES 340, 104 — with Interchangeable Anvils, Metric Model
0000040191

FEATURES
• IP65 water/dust protection (Series 340*). • Supplied with zero-setting standards bar
*Models with a range up to 300mm.
for each range.
• Wide measuring range with • With SPC output (Series 340).
interchangeable anvils. • Supplied in fitted wooden case.
• With a ratchet stop for constant force. Technical Data
Accuracy: ±(4+R/75)µm, R=max. range (mm)
Digital model Resolution*: 0.001mm
Graduation**: 0.01mm
Flatness: 0.6µm for models up to 300mm
1µm for models over 300mm
Parallelism: 2µm for models up to 75mm
104-136A 3µm for models up to 150mm
340-251-30 (2+R/100)µm for models over 150mm, R=max.
range (mm)
Measuring faces: Carbide tipped (spindle only)
Display*: LCD
Battery*: SR44 (1 pc.), 938882
SPECIFICATIONS Battery life*: Approx. 2.4 years (1.8 years for models over
300mm) years under normal use
Metric Digital model Dust/Water protection level*: IP65 (up to 300mm)
*Digital models **Analog models
Range Resolution Order No. Mass (kg) Remarks
0 - 150mm 0.001mm 340-251-30 0.96 with 6 anvils & 5 standards
Function of Digital Model
150 - 300mm 0.001mm 340-252-30 1.88 with 6 anvils & 6 standards Zero / ABS, Data hold, Preset, Data output,
300 - 400mm 0.001mm 340-520 3.31 with 4 anvils & 4 standards inch/mm conversion (on inch/metric models only)
400 - 500mm 0.001mm 340-521 4.81 with 4 anvils & 4 standards Function Lock, 2 Presets
500 - 600mm 0.001mm 340-522 6.35 with 4 anvils & 4 standards Alarm: Low voltage, Counting value composition error
600 - 700mm 0.001mm 340-523 7.72 with 4 anvils & 4 standards
700 - 800mm 0.001mm 340-524 9.08 with 4 anvils & 4 standards
800 - 900mm 0.001mm 340-525 10.41 with 4 anvils & 4 standards Optional Accessories for Digital Model
900 - 1000mm 0.001mm 340-526 11.78 with 4 anvils & 4 standards 05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)
Metric 959149: SPC cable Straight type (40”/1m)*
959150: SPC cable Straight type (80”/2m)*
Range Graduation Order No. Mass (kg) Remarks 04AZB512: SPC cable L-type (40”/1m)*
0 - 50mm 0.01mm 104-171* 0.32 with 2 anvils & 1 standard 04AZB513: SPC cable L-type (80”/2m)*
0 - 100mm 0.01mm 104-139A 0.79 with 4 anvils & 3 standards * models over 300mm
0 - 150mm 0.01mm 104-135A 1.35 with 6 anvils & 5 standards
50 - 150mm 0.01mm 104-161A 1.35 with 4 anvils & 4 standards
100 - 200mm 0.01mm 104-140A 1.38 with 4 anvils & 4 standards
150 - 300mm 0.01mm 104-136A 2.65 with 6 anvils & 6 standards
200 - 300mm 0.01mm 104-141A 2.22 with 4 anvils & 4 standards
300 - 400mm 0.01mm 104-142A 3.31 with 4 anvils & 4 standards
400 - 500mm 0.01mm 104-143A 4.81 with 4 anvils & 4 standards
500 - 600mm 0.01mm 104-144A 6.35 with 4 anvils & 4 standards
600 - 700mm 0.01mm 104-145A 7.72 with 4 anvils & 4 standards
700 - 800mm 0.01mm 104-146A 9.08 with 4 anvils & 4 standards
800 - 900mm 0.01mm 104-147A 10.41 with 4 anvils & 4 standards
900 - 1000mm 0.01mm 104-148A 11.78 with 4 anvils & 4 standards
*The frame is in a heat-insulated cover.

DIMENSIONS
14.5 2 47.2 2.3 3 43 17 Unit: mm
18.5 18 164.5 14.5 47 17
27.5
2 a L 27.5 3
ø18

9
φ9.7
φ18

ø6.3

5
ø8

ø6.35
ø18

0
45
Interchangeable anvil L a
φ6.35

M1 0 135
93

M2 25 110
104-135A M3 50 85
M4 75 60
M5 100 35
M6 125 10

B-16
 Outside Micrometers
SERIES 105 — with Extension Anvil Collars

FEATURES
Technical Data • Wide measuring range with extension • Square and round pipes are combined for
Accuracy: ±(6+R/75)µm, R=max. range (mm) anvil collars. light weight and rigid frame (for models
Graduation: .001” / 0.01mm
Flatness: .000052” / 1.3µm • 50mm spindle stroke. over 1000mm range).
Parallelism:[.00016”+.00004 (L/4)”] L=max. range (inch) • With ratchet stop for constant force. • Workpiece stopper (for models over
(2+R/100)µm, R=max. range (mm)
Measuring faces: Carbide tipped
• Supplied with zero-setting standards bar 1000mm range).
for each range. • Supplied in a fitted wooden case.

Extension anvil collar

105-105

Range under 1000mm model

105-408

Inch model and over

1000mm model

SPECIFICATIONS
Metric Inch
Range Order No. Extension collars Mass (kg) Range Order No. Extension Mass (kg)
500 - 600mm 105-103 50mm 5.53 collars
600 - 700mm 105-104 50mm 6.35 40 - 44" 105-428 2" 10.0
700 - 800mm 105-105 50mm 7.17 44 - 48" 105-429 2" 10.9
800 - 900mm 105-106 50mm 7.99 48 - 52" 105-430 2" 11.4
900 - 1000mm 105-107 50mm 8.81 52 - 56" 105-431 2" 11.9
1000 - 1100mm 105-408 50mm 6.37 56 - 60" 105-432 2" 12.6
1100 - 1200mm 105-409 50mm 7.08 60 - 64" 105-433 2" 13.2
1000 - 1200mm 105-418 50mm, 100mm 13.77 64 - 68" 105-434 2" 14.1
1200 - 1300mm 105-410 50mm 7.79 68 - 72" 105-435 2" 14.9
1300 - 1400mm 105-411 50mm 8.50 72 - 76" 105-436 2" 15.8
1200 - 1400mm 105-419 50mm, 100mm 15.77 76 - 80" 105-437 2" 16.7
1400 - 1500mm 105-412 50mm 9.21
1500 - 1600mm 105-413 50mm 10.17
1400 - 1600mm 105-420 50mm, 100mm 17.91
1600 - 1700mm 105-414 50mm 11.13
1700 - 1800mm 105-415 50mm 12.09
1600 - 1800mm 105-421 50mm, 100mm 20.80
1800 - 1900mm 105-416 50mm 13.05
1900 - 2000mm 105-417 50mm 14.01
1800 - 2000mm 105-422 50mm, 100mm 22.76

B-17
Outside Micrometers
SERIES 406 — Non-Rotating Spindle Type

FEATURES Technical Data

• Supplied in a fitted plastic case. Accuracy: Refer to the list of specifications
• With a standard bar except for 0 -1” / Resolution: .00005”/0.001mm or 0.001mm
0 - 25mm model. • Non-slip grip finish Flatness: 0.3µm / .000012”
Parallelism: .00012”/3µm for models up to 3”/75mm
• With SPC output. .00016”/4µm for 4”/100mm models
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 2.4 years under normal use
406-350-30
Function of Digital Model
Origin-set, Zero / ABS, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)
SPECIFICATIONS
Metric Digital model with ratchet stop
Range Resolution Order No. Accuracy
0 - 25mm 0.001mm 406-250-30 ±3µm
25 - 50mm 0.001mm 406-251-30 ±3µm
50 - 75mm 0.001mm 406-252-30 ±3µm
75 - 100mm 0.001mm 406-253-30 ±4µm

Inch/Metric Digital model with ratchet stop

Range Resolution Order No. Accuracy
0 - 1"/0 - 25.4mm .00005"/0.001mm 406-350-30 ±.00015"
1 - 2"/25.4 - 50.8mm .00005"/0.001mm 406-351-30 ±.00015"
2 - 3"/50.8 - 72.6mm .00005"/0.001mm 406-352-30 ±.00015"
3 - 4"/76.2 - 101.6mm .00005"/0.001mm 406-353-30 ±.0002"

DIMENSIONS AND MASS

Digital models (up to 75mm) Analog models Unit:
(up mm
Unit: to 50mm)
mm
b L 42.5 2.3 3 41 11.5 17 b L 14.5 3 62
a 41.5 14.2 a 27.5
ø21
ø8
ø6.35

ø14

ø18

c
c

Analog models (over 50mm)

b L 14.5 3 62
a 27.5
ø21
ø8
c

Digital models (over 75mm)

b L 14.5 6.5 47.2 2.3 3 41 11.5 17
a 27.5
ø6.35

ø18
c

B-18
 Outside Micrometers
SERIES 107

FEATURES
• Uses dial indicator for direct go/no-go • With a standard bar except for 0 - 25mm
judgment for mass-produced parts. models.
• Anvil retracting trigger for quick • Supplied in fitted plastic case.
measurement.
Technical Data
Graduation: 0.01mm (thimble)
Flatness: 0.6µm
Parallelism: (2+R/100)µm, R=max. range (mm)
Measuring faces: Carbide tipped
Anvil retracting range: 3mm

107-201
Dial indicator is an option

SPECIFICATIONS
Metric
Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 107-201 ±2µm
25 - 50mm 0.01mm 107-202 ±2µm
50 - 75mm 0.01mm 107-203 ±2µm
75 - 100mm 0.01mm 107-204 ±3µm
100 - 125mm 0.01mm 107-205 ±3µm
125 - 150mm 0.01mm 107-206 ±3µm
150 - 175mm 0.01mm 107-207 ±4µm
175 - 200mm 0.01mm 107-208 ±4µm

DIMENSIONS AND MASS

Unit: mm
Dial 28.5 L 14.5 3 50.5
indicator
27.5
ø6.35

ø18
a

Lever
Range L a MASS (g)
0 - 25mm 39.5 30 480
25 - 50mm 64.5 38 520
50 - 75mm 90 45 585
75 - 100mm 115.6 65 630
100 - 125mm 140.6 79 725
125 - 150mm 165.6 93 810
150 - 175mm 190.5 105 1050
175 - 200mm 215.5 120 1170

B-19
Spline Micrometers
SERIES 331, 111
0000040191

FEATURES
• IP65 water/dust protection (Series 331). • With ratchet stop for constant force.
• The anvil and spindle have a small diameter • With SPC output (Series 331). Technical Data
for measuring splined shafts, slots, and • With a standard bar except 0-1” and Accuracy: Refer to the list of specifications
Resolution*: .00005”/0.001mm or 0.001mm
keyways. 0-25mm model. Graduation**: .0001” or 0.01mm, .001"
• Non-slip grip finish (digital models) • Supplied in fitted plastic case. Flatness: .000012” / 0.3µm
Parallelism: (2+R/100)µm, R=max. range (mm)
[.00008” + .00004” (L/4”)]
L = max. range (inch)
Measuring faces: Carbide tipped
331-351-30 Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
Dust/Water protection level*: IP65
*Digital models **Analog models

111-115
Function of Digital Model
Origin-set, Zero-setting, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

SPECIFICATIONS Optional Accessories for Digital Model

Metric Digital model 05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80”/ 2m)
Range Resolution Order No. Accuracy Remarks Mass (g) Inch/Metric Digital model
0 - 25mm 0.001mm 331-251-30 ±2µm Type A 330
Range Resolution Order No. Accuracy Remarks Mass (g)
331-261-30 ±2µm Type B 330
0 - 1"/ .00005" / 331-351-30 ±.0001" Type A 330
25 - 50mm 0.001mm 331-252-30 ±2µm Type A 470 0 - 25.4mm 0.001mm 331-361-30 ±.0001" Type B 330
331-262-30 ±2µm Type B 470
1 - 2"/ .00005" / 331-352-30 ±.0001" Type A 470
50 - 75mm 0.001mm 331-253-30 ±2µm Type A 625 25.4-50.8mm 0.001mm
331-362-30 ±.0001" Type B 470
331-263-30 ±2µm Type B 625
2 - 3" / .00005" / 331-353-30 ±.0001" Type A 625
75 - 0.001mm 331-254-30 ±3µm Type A 565 50.8-76.2mm 0.001mm
100mm 331-363-30 ±.0001" Type B 625
331-264-30 ±3µm Type B 565
3 - 4" / .00005" / 331-354-30 ±.00015" Type A 565
76.2-101.6mm 0.001mm
331-364-30 ±.00015" Type B 565
Metric
Range Graduation Order No. Accuracy Remarks Mass (g) Inch
0 - 25mm 0.01mm 111-115 ±3µm Type A 205
Range Graduation Order No. Accuracy Remarks Mass (g)
111-215 ±3µm Type B 205
0 - 1" .0001" 111-166* ±.00015" Type A 205
25 - 50mm 0.01mm 111-116 ±3µm Type A 305
* .0001" reading is obtained with vernier.
50 - 75mm 0.01mm 111-117 ±3µm Type A 370
75 - 100mm 0.01mm 111-118 ±4µm Type A 500 Unit: mm
B-41_3

100 - 125mm 0.01mm 111-119 ±4µm Type A 655 Type A (ø3mm) Type B (ø2mm)
125 - 150mm 0.01mm 111-120 ±4µm Type A 710 10 10 5 5
150 - 175mm 0.01mm 111-121 ±5µm Type A 900
175 - 200mm 0.01mm 111-122 ±5µm Type A 1040
ø3

ø2

DIMENSIONS
Unit: mm
Models up to 75mm Models over 75mm
b L 42.5 2.3 3 43 17 b L 14.5 2 47.2 2.3 3 43 17
a
ø9.7

a 40.7
ø9.7

37.5
ø18

ø18
ø6.35
ø6.35
c

Range L a b c
0 - 25mm 58.2 (55.3) 17.5 (17.8) 7.3 (10) 32 (38)
Digital model Digital model 25 - 50mm 83.2 (80.3) 17.5 (17.8) 10.1 (12) 47 (49)
50 - 75mm 108.2 (105.3) 20.3 (17.8) 11.5 (14) 60 (60)
75 - 100mm 132.8 (132.8) 20.3 (20.3) 16.7 (17) 76.5 (79)

B-20
 Point Micrometers
SERIES 342, 142, 112
0000040191

FEATURES
• IP65 water/dust protection (Series 342). • The measuring points have approximately
Technical Data • Pointed spindle and anvil for measuring 0.3mm / .012” radius.
Accuracy: Refer to the list of specifications.
Resolution*: .00005"/0.001mm or 0.001mm the web thickness of drills, small grooves, • With ratchet stop for constant force.
Graduation**: .001” or 0.01mm keyways, and other hard-to-reach • With SPC output (Series 342).
Display*: LCD dimensions. • With digit counter (Series 142).
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use • 15 degree and 30 degree measuring points • With a standard bar except 0 - 1”
Dust/Water protection level*: IP65
*Digital models **Analog models
are available. and 0 - 25mm model.
• Non-slip grip finish (digital models). • Supplied in fitted plastic case.
Function of Digital Model
Origin-set, Zero / ABS, Data hold,
inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error 342-351-30

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)
112-201

SPECIFICATIONS
Metric Digital model (with carbide tip) Inch/Metric Digital model (with carbide tip)
Range Resolution Order No. Accuracy Point Mass (g) Range Resolution Order No. Accuracy Point Mass (g)
342-251-30 ±2µm 15° 330 0 - 1"/ .00005” / 342-351-30 ±.0001" 15° 330
0 - 25mm 0.001mm 0 -25.4mm 0.001mm 342-361-30 ±.0001"
B-43 15
342-261-30 ±2µm 30° 330 30° 330
342-252-30 ±2µm 15° 470 1" - 2" / .00005” / 342-352-30 ±.0001" 15° 470
25 - 50mm 0.001mm 25.4 - 50.8mm 0.001mm 342-362-30 ±.0001"
342-262-30 ±2µm 30° 470 30° 470
342-253-30 ±2µm 15° 625 2" - 3" / .00005” / 342-353-30 ±.0001" 15° 625
50 - 75mm 0.001mm 50.8 - 76.2mm 0.001mm 342-363-30 ±.0001"
342-263-30 ±2µm 30° 625 30° 625
342-254-30 ±3µm 15° 565 3" - 4" / .00005” / 342-354-30 ±.00015" 15° 565
75 - 100mm 0.001mm 76.2 - 101.6mm 0.001mm 342-364-30 ±.00015"
342-264-30 ±3µm 30° 565 30° 565

Metric Mechanical Counter Model Inch Mechanical Counter Model

Range Graduation Order No. Accuracy Point Mass (g) Range Graduation Order No. Accuracy Point Mass (g)
142-153* ±3µm 15° 260 142-177* ±.00015" 15° 260
0 - 25mm 0.01mm 0 - 1" .001"
Tip angle: 15° (R0.3mm) 142-201* ±3µm 30° 260 142-225* ±.00015" 30° 260
*The points don't have carbide tips. *The points don't have carbide tips.
Metric Inch
Range Graduation Order No. Accuracy Point Mass (g) Range Graduation Order No. Accuracy Point Mass (g)
112-165 ±3µm 15° 205 112-189 ±.00015" 15° 205
112-153* ±3µm 15° 205 112-177* ±.00015" 15° 205
0 - 25mm 0.01mm 0 - 1" .001"
112-213 ±3µm 30° 205 112-237 ±.00015" 30° 205
Tip angle: 30° (R0.3mm) 112-201* ±3µm 30° 205 112-225* ±.00015" 30° 205
112-166 ±3µm 15° 305 112-190 ±.00015" 15° 305
112-154* ±3µm 15° 305 112-178* ±.00015" 15° 305
25 - 50mm 0.01mm 1 - 2" .001"
112-214 ±3µm 30° 305 112-238 ±.00015" 30° 305
112-202* ±3µm 30° 305 112-226* ±.00015" 30° 305
112-167 ±3µm 15° 370 2 - 3" .001" 112-191 ±.00015" 15° 370
112-155* ±3µm 15° 370 *The points don't have carbide tips.
50 - 75mm 0.01mm
112-215 ±3µm 30° 370
112-203* ±3µm 30° 370
112-168 ±4µm 15° 500
112-156* ±4µm 15° 500
75 - 100mm 0.01mm
112-216 ±4µm 30° 500
112-204* ±4µm 30° 500
*The points don't have carbide tips.

B-21
 DIMENSIONS
Models up to 75mm Models over 75mm
b L 42.5 2.3 3 43 17 b L 14.5 2 47.2 2.3 3 43 17
a 45.7 a 42.5

ø9.7
ø9.7

ø18
ø18
ø6.35

ø6.35
Unit: mm
c

10 10

c
15° 30°

Digital model
Range L a b c d
0 - 1” / 0 - 25mm 58.2 (55.3) 12.5 (12.8) 7.3 (10) 32 (38) 6.35
Digital model
1 - 2” / 25 - 50mm 83.2 (80.3) 12.5 (12.8) 10.1 (12) 47 (49) 6.35
2 - 3” / 50 - 75mm 108.2 (105.3) 12.5 (15.3) 11.5 (14) 60 (60) 6.35
3 - 4” / 75 -100mm 132.8 (132.8) 15.3 (15.3) 16.7 (17) 76.5 (79) 6.35
( ): Analog model

Crimp Height Micrometers

SERIES 342, 142, 112 — Point Spindle and Blade Anvil

FEATURES 0000040191

• IP54/65 water/dust protection (Series 342). • With SPC output (Series 342).
• Measures the height of crimp contacts. • With digit counter (Series 142).
• With ratchet stop for constant force. • Supplied in fitted plastic case.
• Non-slip grip finish (digital models)
Technical Data
Accuracy: Refer to the list of specifications
Resolution*: .00005" / 0.001mm or 0.001mm
Graduation**: 0.01mm
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
112-401 (3 years: Quickmike type)
Dust/Water protection level*: IP65 / IP54
*Digital models **Analog models
342-371-30
Function of Digital Model
Origin-set, Zero / ABS (342-271-30, 342-371-30),
Quickmike type Data hold, Data output, inch/mm conversion
(on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m )
937387: SPC cable for Quickmike type (40”/ 1m)
965013: SPC cable for Quickmike type (80” / 2m)
342-451

SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy Mass (g) Range Resolution Order No. Accuracy Mass (g)
Unit: mm
0 - 20mm 0.001mm 342-271-30 ±3µm 270 0 - 0.8" / .00005” / 342-371-30 ±.00015" 270
60° (27°)
0 - 20mm 0.001mm 0.5 (1)
Metric Quickmike type
Range Resolution Order No. Accuracy Mass (g)
0 - 15mm 0.001mm 342-451 ±3µm 275
ø0.5 (ø0.6)
Metric Mechanical counter model Metric
( ): for Series 142
Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 142-402 ±3µm 200 0 - 25mm 0.01mm 112-401 ±3µm 165
0 - 25mm 0.001mm 142-403* ±3µm 200
* 0.001mm reading is obtained with vernier.

B-22
 V-Anvil Micrometers
SERIES 314, 114 — 3 Flutes and 5 Flutes

FEATURES
• Measures the outside diameter of cutting • V-anvils with a centerline groove are
Technical Data tools (such as taps, reamers, end mills) available. They are useful for measuring
Accuracy: Refer to the list of specifications with an odd number of flutes. pitch diameters of taps which have a small
Resolution*: .00005" / 0.001mm or 0.001mm • With ratchet stop for constant force. diameter by using single-wire method.
Graduation**: .001" or .0001", 0.01mm
Flatness (spindle/anvil): • Supplied with setting standard. • With SPC output (Series 314).
Analog model: .000024” / 0.6µm, .00005” / 1.3µm • Non-slip grip finish (digital models). • Supplied in fitted plastic case.
Digital Model: .000012" / 0.3µm, .00004" / 1µm
Spindle face: Carbide tipped
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
*Digital models **Analog models
314-351-30
Function of Digital Model
Zero / ABS, Data hold, Data output, Preset,
inch/mm conversion (on inch/metric models only)
Function lock, 2 Presets
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m) 114-121
05CZA663: SPC cable with data switch (80” / 2m)

114-202

114-204

SPECIFICATIONS
Pitch Diameter Measurement of Tap Metric Digital model for 3 flutes cutting head
by Single-wire Method Inch/Metric Range Resolution Order No. Accuracy Remarks Setting Standard Mass (g)
Wire 314-251-30 ±4µm w/Groove ø5mm 275
Anvil 1 - 15mm 0.001mm
Spindle 314-261-30 ±4µm — ø5mm 275
314-252-30 ±4µm w/Groove ø10mm 410
10 - 25mm 0.001mm
314-262-30 ±4µm — ø10mm 410
25 - 40mm 0.001mm 314-253-30 ±5µm — ø25mm 465
Tap

Inch/Metric Digital model for 3 flutes cutting head

Range Resolution Order No. Accuracy Remarks Setting Standard Mass (g)
.05 - .6"/ .00005” / 314-351-30 ±.0002" w/Groove ø.2" 275
1.27 - 15.24mm 0.001mm 314-361-30 ±.0002" — ø.2" 275
.4" - 1"/ .00005” / 314-352-30 ±.0002" w/Groove ø.4" 410
10.16 - 25.4mm 0.001mm 314-362-30 ±.0002" — ø.4" 410
1" - 1.6"/ .00005” / 314-353-30 ±.00025" — ø 1" 465
25.4 - 40.64mm 0.001mm

B-23
SPECIFICATIONS
Metric For 3 flutes cutting head Inch For 3 flutes cutting head
Range Graduation Order No. Accuracy Setting Remarks Mass (g) Range Graduation Order No. Accuracy Setting Mass (g)
Standard Standard
1 - 15mm 0.01mm 114-101 ±4µm ø5mm w/Groove 120 .05 - .6" .001” 114-163 ±.0002" ø.2” 120
114-161 ±4µm ø5mm ­— 120 .09 - 1" .0001” 114-202* ±.0002" ø.2” 280
10 - 25mm 0.01mm 114-102 ±4µm ø10mm w/Groove 280 1 - 1.6" .001” 114-113 ±.00025" ø1” 400
114-162 ±4µm ø10mm — 280 1.6 - 2.2" .001” 114-114 ±.0003" ø1.6” 465
2.3 - 25mm 0.01mm 114-204* ±4µm ø5mm — 290 *Carbide-tipped anvil and .0001" reading is obtained with
vernier.
25 - 40mm 0.01mm 114-103 ±5µm ø25mm — 400
40 - 55mm 0.01mm 114-104 ±6µm ø40mm — 465
55 - 70mm 0.01mm 114-105 ±6µm ø55mm — 675
70 - 85mm 0.01mm 114-106 ±7µm ø70mm — 910
*Carbide-tipped anvil

Metric For 5 flutes cutting head Inch For 5 flutes cutting head
Range Graduation Order No. Accuracy Setting Remarks Mass (g) Range Graduation Order No. Accuracy Setting Mass (g)
Standard Standard
5 - 25mm 0.01mm 114-121 ±4µm ø5mm w/Groove 255 .09 - 1" .0001” 114-135 ±.0002" ø.2” 255
114-165 ±4µm ø5mm — 255
2.3 - 25mm 0.01mm 114-137* ±4µm ø5mm — 220
25 - 45mm 0.01mm 114-122 ±5µm ø25mm — 400
45 - 65mm 0.01mm 114-123 ±6µm ø55mm — 540
65 - 85mm 0.01mm 114-124 ±7µm ø70mm — 760
*Carbide-tipped anvil

DIMENSIONS
Unit: mm
ø1.5
8

w/o groove model

ø1.5
8

w/ groove model
.7
22
30.3
.7)
(14
ø6.35
0.5

(23.46)
(14.5)

60°
60°

114-204
114-101

27.5 14.5 3 47 17
ø6.35

18
(a)

60

ø18

Range a
.05 - .6” / 10 - 25mm 6.2
1 - 1.6” / 25 - 40mm 19.14
1.6 - 2.2” / 40 - 55mm 32.13
55 - 70mm 45.12
114-103 70 - 85mm 58.11

B-24
 Limit Micrometers
SERIES 113

FEATURES
• Can be used as a go/no-go gage by setting
the upper and lower limits.
• Provided with a standard bar for 25mm -
50mm model.
• Supplied in fitted plastic case.

113-102

Technical Data
Graduation: 0.01mm
Flatness: 0.6µm
Parallelism: (3+R/100)µm, R=max. range (mm)
Measuring faces: Carbide tipped

SPECIFICATIONS
Metric
Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 113-102 ±3µm
25 - 50mm 0.01mm 113-103 ±3µm

DIMENSIONS AND MASS

Unit: mm
a L 14.5
1.8 27.5
ø6.35

ø18
19.5

C0.5
c

(each spindle
& anvil)

Range L a c Mass (G)

0 - 25mm 29.3 15 23 340
25 - 50mm 54.3 15 37 380

B-25
Pana Micrometers
SERIES 116 — Interchangeable Anvil Type

FEATURES Technical Data

Graduation: .001” or 0.01mm
• Non-rotating spindle with optional • V-anvils and conical spindle tips (matching Spindle feed error: .00012” / 3µm
seven interchangeable anvils (flat, spline, pair) for screw thread measurement are
spherical, point, knife-edge, disk and also available.
blade) for a wide range of applications. • With ratchet stop for constant force.
Optional Accessories
• Interchangeable anvils (pair) are optional. Interchangeable V-anvil and conical spindle tip set:
• With a standard bar except 0-1” and For Metric/Unified screw
0 - 25 mm model. Order No. Assortment of anvils and tips
116-830 0.4 - 0.5mm/64 - 48TPI (116-831)
0.6 - 0.9mm/44 - 28TPI (116-832)
1 - 1.75mm/24 - 14TPI (116-833)
2 - 3mm/13 - 9TPI (116-834)
3.5 - 5mm/8 - 5TPI (116-835)
5.5 - 7mm/4.5 - 3.5TPI (116-836)

ø3.5
116-830
116-101
Interchangeable anvils set
Order No. Assortment of anvils
116-800 Flat anvils (116-801)
Spline anvils (116-802)
Spherical anvils (116-803)
Point anvils (116-804)
Knife-edge anvils (116-805)
Disk anvils (116-806)
Blade anvils (116-807)

ø2
ø6

ø6
Flat Spline 3.5
116-801 116-802

ø0.3
116-105

55°

ø4
ø6
SR4
Spherical Point
Shown with optional anvils 116-803 116-804
ø3.5
0.1

ø11.1
45°

Knife-edge Disk
116-805 2 116-806 0.4
0.75

Blade
SPECIFICATIONS 116-807
Metric Inch
Range Graduation Order No. Accuracy Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 116-101 ±4µm 0 - 1" .001" 116-105 ±.0002"
25 - 50mm 0.01mm 116-102 ±4µm 1" - 2" .001" 116-106 ±.0002"

B-26
 Spherical Face Micrometers
SERIES 395, 295, 115
0000040191

FEATURES
Technical Data • IP65 water/dust protection (Series 395). • With digit counter (Series 295).
Accuracy: Refer to the list of specifications • Designed to measure the wall thickness of • With a standard bar except 0 -1”
Flatness: .000024” / 0.6µm various tubing. and 0 - 25mm model.
Display*: LCD
Battery*: SR44 (1 pc.), 938882 • With ratchet stop for constant force. • Supplied in fitted plastic case.
Battery life*: Approx. 2.4 years under normal use • With SPC output (Series 395).
Dust/Water protection level*: IP65 • Non-slip grip finish (digital models).
*Digital models **Analog models

Function of Digital Model

Origin-set, Zero / ABS, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
115-153
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)

Spherical anvil-spindle type

395-371-30

SPECIFICATIONS Digital model with

Metric Digital model with spherical anvil Inch/Metric spherical anvil
Range Resolution Order No. Accuracy Remarks Mass (g) Range Resolution Order No. Accuracy Remarks Mass (g)
Unit: mm
0 - 25mm 0.001mm 395-251-30S-F ±2µm D: 15mm 270 0 - 1"/ .00005" / 395-351-30S-F ±.0001" D: .59" 270
Measuring faces: 0 - 25.4mm 0.001mm 395-371-30S-S ±.0001"
øD 395-271-30S-S ±2µm D: 15mm 270 D: .59" 270
Carbide tipped
5

25 - 50mm 0.001mm 395-252-30S-F ±2µm D: 15mm 330 1" - 2"/ .00005" / 395-352-30S-F ±.0001" D: .59" 330
395-272-30S-S ±2µm D: 15mm 330 25.4- 50.8mm 0.001mm
SR4 SR4
395-372-30S-S ±.0001" D: .59 330
50 - 75mm 0.001mm 395-253-30S-F ±2µm D: 19mm 470 2" - 3"/ .00005" / 395-353-30S-F ±.0001" D: .75" 470
395-273-30S-S ±2µm D: 19mm 470 50.8-76.2mm 0.001mm
ød: Mini. inside 395-373-30S-S ±.0001" D: .75" 470
dia. of tubing 75 - 0.001mm 395-254-30S-F ±3µm D: 20mm 625 3" - 4"/ .00005" / 395-354-30S-F ±.00015" D: .79" 625
100mm 395-274-30S-S ±3µm D: 20mm 625 76.2-101.6mm 0.001mm
395-374-30S-S ±.00015" D: .79" 625
S-F: Spherical anvil and flat spindle S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle S-S: Spherical anvil and spherical spindle
Mechanical counter model
Metric Mechanical counter model with spherical anvil Inch with spherical anvil
Range Graduation Order No. Accuracy Remarks Mass (g) Range Graduation Order No. Accuracy Remarks Mass (g)
0 - 25mm 0.01mm 295-115S-F ±3µm D: 10mm 220 0 - 1" .0001" 295-153S-F* ±.00015" D: .40" 220
295-215S-S ±3µm D: 10mm 220 295-253S-S* ±.00015" D: .40" 220
S-F: Spherical anvil and flat spindle S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle S-S: Spherical anvil and spherical spindle
*.0001" reading is obtained with vernier.

Metric With spherical anvil Inch With spherical anvil

Range Graduation Order No. Accuracy Remarks Mass (g) Range Graduation Order No. Accuracy Remarks Mass (g)
0 - 25mm 0.01mm 115-115S-F ±3µm D: 10mm 180 0 - 1" .0001" 115-153S-F* ±.00015" D: .40" 180
115-215S-S ±3µm D: 10mm 180 0 - 1" .0001" 115-253S-S* ±.00015" D: .40" 180
25 - 50mm 0.01mm 115-116S-F ±3µm D: 11mm 240 1 - 2" .001" 115-242S-S ±.00015" D: .44" 240
115-216S-S ±3µm D: 11mm 240 2 - 3" .001" 115-243S-S ±.00015" D: .67" 315
50 - 75mm 0.01mm 115-117S-F ±3µm D: 17mm 315 S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle
115-217S-S ±3µm D: 17mm 315 *.0001" reading is obtained with vernier.
75 - 100mm 0.01mm 115-118S-F ±4µm D: 18mm 375
115-218S-S ±4µm D: 18mm 375
S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle

B-27
Tube Micrometers
SERIES 395, 295, 115— Spherical and Cylindrical Anvils
0000040191

FEATURES Technical Data

• IP65 water/dust protection (Series 395). • With ratchet stop for constant force. Accuracy: Refer to the list of specifications.
• Designed to measure the wall thickness of • With SPC output (Series 395). Flatness: .000024” / 0.6µm
Display*: LCD
various tubing. • With digit counter (Series 295). Battery*: SR44 (1 pc.), 938882
• The Tube Micrometers have two • With a standard bar except 0 -1" and Battery life*: Approx. 2.4 years under normal use
Dust/Water protection level*: IP65
combinations of measuring faces (carbide- 0 - 25mm model. *Digital models
tipped): spherical-flat type. • Supplied in fitted plastic case.
• Non-slip grip finish (digital models). Function of Digital Model
Origin-set, Zero / ABS, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Pin Anvil Type Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)
395-261-30

Type A Type B

Type C Type D
SPECIFICATIONS
Metric Digital model with cylindrical anvil Inch/Metric Digital model with cylindrical anvil
Range Resolution Order No. Accuracy Remarks Mass (g) Range Resolution Order No. Accuracy Remarks Mass (g)
395-261-30 ±3µm Type A 270 0 - 1" / .00005" / 395-362-30 ±.00015" Type B 270
395-262-30 ±3µm Type B 270 0 - 25.4mm 0.001mm 395-363-30 ±.00015" Type C 310
0 - 25mm 0.001mm
395-263-30 ±3µm Type C 310 395-364-30 ±.00015" Type D 310
395-264-30 ±3µm Type D 310

Metric Mechanical counter model Inch Mechanical counter model

Range Graduation Order No. Accuracy Remarks Mass (g) Range Graduation Order No. Accuracy Remarks Mass (g)
0 - 25mm 0.01mm 295-302 ±3µm Type A 210 295-313 ±.00015" Type C 210
0 - 1" .0001"
295-314 ±.00015" Type D 210

Metric With cylindrical anvil Inch With cylindrical anvil

Range Graduation Order No. Accuracy Remarks Mass (g) Range Graduation Order No. Accuracy Remarks Mass (g)
115-302 ±3µm Type A 180 .001" 115-305 ±.00015" Type A 180
115-308 ±3µm Type B 180 0 - 1" .0001" 115-313* ±.00015" Type C 180
0 - 25mm 0.01mm
115-315 ±3µm Type C 180 .0001" 115-314* ±.00015" Type D 180
115-316 ±3µm Type D 180 *.0001" reading is obtained with vernier.
115-303 ±3µm Type A 240
25 - 50mm 0.01mm
115-309 ±3µm Type B 240
øD

Sø4.7 ø8 Anvil D L
Type A 2 4
1.4

Sø3.5
9

ø1.8
12.7

ø4 Type B 3.6 4
L

ø6.9 ø6.9 Type C 4.8 12

8

Type D 8.2 22
øD: Mini. inside dia. of tubing
Type A Type B Type C Type D Spindle face: Carbide tipped
(Pin) (Spherical) (Spherical) (Cylindrical)

B-28
 "Uni-Mike"
SERIES 317, 117 — Interchangeable Anvil Type
0000040191

FEATURES
• IP65 water/dust protection (Series 317). • With special Disk Anvils. The Uni-Mike is
• Measures tubing thickness, shoulder- used as a height micrometer. The disks
edge distance, rivet head height, etc. with have a lapped, mirror surface.
Technical Data interchangeable anvils (flat anvil, rod anvil, • With a standard bar except 0 -1” and
Accuracy: Refer to the list of specifications. V-anvil). 0-25mm model.
Resolution*: .00005"/0.001mm or 0.001mm
Graduation**: .0001” or 0.01mm • Supplied with Flat Anvil (201216) and Rod • Supplied in fitted plastic case.
Spindle face: Carbide tipped Anvil: .118”/ø3mm dia. rod anvil (201217) • Non-slip grip finish (digital models)
Display*: LCD
Battery*: SR44 (1 pc.), 938882 for 0-1”/0-25mm models, .197”/ø5mm
Battery life*: Approx. 2.4 years under normal use (201379) for 1-2” / 25-50mm model.
Dust/Water protection level*: IP65
*Digital models **Analog models

Function of Digital Model

Origin-set, Zero / ABS, Data hold, Data output,
inch/mm conversion (on inch/metric models only) 317-351-30
Function Lock
Alarm: Low voltage, Counting value composition error

Optional Accessories
05CZA662: SPC cable with data switch (40”/ 1m)*
05CZA663: SPC cable with data switch (80” / 2m)*
201218: V-anvil
950758: Disc. anvil for 1” / 25m models
117-107
*Only for digital models.

SPECIFICATIONS
Metric Digital model with ratchet stop
Range Resolution Order No. Accuracy Mass (g)
0 - 25mm 0.001mm 317-251-30 ±4µm 335
25 - 50mm 0.001mm 317-252-30 ±4µm 360
Excluding quantizing error
Applications
Inch/Metric Digital model with friction thimble
Range Resolution Order No. Accuracy Mass (g)
0 - 1" / 0 - 25.4mm .00005" / 0.001mm 317-351-30 ±.0002" 340
1 - 2" /25.4 - 50.8mm .00005" / 0.001mm 317-352-30 ±.0002" 365
Excluding quantizing error

Metric With ratchet stop Inch With friction thimble

Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
Using flat anvil (201216)
0 - 25mm 0.01mm 117-101 ±4µm 255 0 - 1" .0001" 117-107* ±.0002" 255
25 - 50mm 0.01mm 117-102 ±4µm 320 1 - 2" .0001" 117-108* ±.0002" 320
* .0001" reading is obtained with vernier.
DIMENSIONS
1.5 52.5 (27.5) Unit: mm

25 (0) 27.5
ø18
7

ø6.35
25
26.5
34
33.6

( ): for 0-25mm / 0-1” model

8.5
ø3 (201217) 120° 1.5 6.35
ø5 (201379)
25

25

Rod anvil
25

With the disc. anvil (950758) Shown above, the (Standard accessory)
Uni-Mike is used as a height micrometer.
V-anvil Flat anvil
(Optional) (Standard accessory)
(201218) (201216)

B-29
Sheet Metal Micrometers
SERIES 389, 119, 118
0000040191

FEATURES
• Measures thickness of sheet metal, paper, • IP65 water/dust protection (Series 389*). Technical Data
plastic and rubber parts. *Except for 389-514 / 389-714.
Accuracy: Refer to the list of specifications
• With ratchet stop for constant force. • Supplied in fitted plastic case. Resolution*: .00005"/0.001mm or 0.001mm
Graduation**: 0.01mm, .001" or .0001"
• With a standard bar except for 0 - 1” / • Non-slip grip finish (digital models). Flatness: .000024” / 0.6µm for models with 6” / 150mm throat
0 - 25mm model. .00004” / 1µm for models with 12” / 300mm throat
DIMENSIONS Parallelism: .00012” / 3µm
Measuring faces: Carbide tipped
Unit: mm Display*: LCD
b Battery*: SR44 [1 pc. (2 pcs.: 389-514 and 389-714)],
389-351-30
938882
Battery life*: Approx. 2.4 years under normal use
(1.8 years: 389-514 and 389-714)
Dust/Water protection level*: IP65
*Digital models **Analog models
118-102
a Function of Digital Model
Origin-set, Zero-setting, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (40” / 1m )
05CZA663: SPC cable with data switch (80” / 2m)
04AZB512: SPC cable for 389-514/389-714 (40” / 1m)
04AZB513: SPC cable for 389-514/389-714 (80” / 2m)

SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy a/b Range Resolution Order No. Accuracy a/b
Anvil-Spindle Combinations
0 - 25mm 0.001mm 389-251-30 ±4µm 160/27.5mm 0 - 1" / .00005" / 389-351-30 ±.0002" 6.3"/1.08"
0 - 25mm 0.001mm 389-261-30S-F ±4µm 160/27.5mm 0 - 25.4mm 0.001mm 389-361-30S-F ±.0002" 6.3"/1.08"
0 - 25mm 0.001mm 389-271-30S-S ±4µm 160/27.5mm 389-371-30S-S ±.0002" 6.3"/1.08"
0 - 25mm 0.001mm 389-514 ±5µm 330/35mm 389-714 ±.00025" 13"/1.38"
25 - 50mm 0.001mm 389-252-30 ±4µm 165/27.5mm 1 - 2" / .00005" / 389-352-30 ±.0002" 6.5"/1.08"
Standard, Flat-Flat
25 - 50mm 0.001mm 389-262-30S-F ±4µm 165/27.5mm 25.4 - 50.8mm 0.001mm 389-362-30S-F ±.0002" 6.5"/1.08"
25 - 50mm 0.001mm 389-272-30S-S ±4µm 165/27.5mm 389-372-30S-S ±.0002" 6.5"/1.08"
S-F: Spherical anvil and flat spindle S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle S-S: Spherical anvil and spherical spindle

Metric Inch Spherical-Flat (S-F)

Range Graduation Order No. Accuracy a/b Range Graduation Order No. Accuracy a/b
0 - 25mm 0.01mm 118-101 ±4µm 110/27.5mm 0 - 1" .0001" 118-129 ±.0002" 6.3"/1.08"
0 - 25mm 0.01mm 118-102 ±4µm 160/27.5mm 118-116S-F ±.0002" 6.3"/1.08"
0 - 25mm 0.01mm 118-114S-F ±4µm 160/27.5mm 118-120S-S ±.0002" 6.3"/1.08"
0 - 25mm 0.01mm 118-118S-S ±4µm 160/27.5mm .001" 118-107 ±.00025" 13"/1.38"
0 - 25mm 0.01mm 118-103 ±5µm 330/35mm 1" - 2" .001" 118-112 ±.0002" 6.5"/1.08" Spherical-Spherical (S-S)
25 - 50mm 0.01mm 118-110 ±4µm 165/27.5mm S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle
S-F: Spherical anvil and flat spindle
S-S: Spherical anvil and spherical spindle *.0001" reading is obtained with vernier.
The Series 119 is provided with a dial for
Metric Dial reading model DIMENSIONS AND MASS making easy and quick readings.
Range Graduation Order No. Accuracy Throat
0 - 25mm 0.01mm 119-202S-F ±4µm 50mm 19 2.5 27.5 14.5 7 3 40 4 17

S-F: Spherical anvil and flat spindle

ø6.39
6

ø19
ø60

SR20
(Anvil)
50

119-202
Unit: mm

B-30
Technical Data
Accuracy: Refer to the list of specifications
Resolution*: .00005"/0.001mm or 0.001mm
Blade Micrometers
Graduation**: .0001" or 0.01mm SERIES 422,122 — Non-Rotating Spindle Type
Parallelism: .00012” / 3µm for models up to 3” / 75mm
(3+R/100)µm for models over 75mm,
R=max. range (mm) .00016” for 4” models FEATURES
Display*: LCD
Battery*: SR44 (1 pc.), 938882 • The anvil and the spindle have a blade for • Speedy spindle feed of .4”/10mm /rev.
Battery life*: Approx. 2.4 years under normal use
*Digital models **Analog models
measuring the groove diameter of shafts, (Quickmike type).
keyways and other hard-to-reach areas. • With a standard bar except 0 - 1” and
Function of Digital Model • With ratchet stop for constant force. 0 -25mm model.
Origin-set, Zero / ABS, Data hold, Data output, • Supplied in fitted plastic case.
inch/mm conversion (on inch/metric models only)
• Non-slip grip finish (digital models).
Function lock
Alarm: Low voltage, Counting value composition error Quickmike type

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (1m / 40”)
05CZA663: SPC cable with data switch (2m / 80”) 422-421
937387: SPC cable for Quickmike type (1m / 40”)
965013: SPC cable for Quickmike type (2m / 80”)

422-330-30

122-125

SPECIFICATIONS
Metric Digital model
TYPE AND DIMENSIONS Inch/Metric Digital model
Range Resolution Order No. Accuracy Remarks Mass (g)
422-230-30 ±3µm Type A 365 Range Resolution Order No. Accuracy Remarks Mass (g)
0.75

422-330-30 ±.00015" Type A 365

ø6

0.75

R8
R8
422-260-30 ±3µm Type B 365
0.4

0 - 25mm 0.001mm
6.5 3
422-270-30 ±3µm Type C 365 0 - 1" / .00005" / 422-360-30 ±.00015" Type B 365
6.5

422-271-30 ±3µm Type D 365 0 - 25.4mm 0.001mm 422-370-30 ±.00015" Type C 365
422-231-30 ±3µm Type A 565 422-371-30 ±.00015" Type D 365
ø6
ø6

Type A Type B 25 - 50mm 0.001mm

422-261-30 ±3µm Type B 565 1 - 2" / .00005" / 422-331-30 ±.00015" Type A 565
50 - 75mm 0.001mm 422-232-30 ±3µm Type A 465 25.4 - 50.8mm 0.001mm 422-361-30 ±.00015" Type B 565
ø6
ø6

0.75

0.4

75 - 100mm 0.001mm 422-233-30 ±4µm Type A 580 2 - 3" / .00005" / 422-332-30 ±.00015" Type A 465
60°
60°

7
8
4
50.8 - 76.2mm 0.001mm
11
3 - 4" / .00005" / 422-333-30 ±.0002" Type A 580
Metric Quickmike type
6
6

76.2 - 101.6mm 0.001mm

Type C Type D Range Resolution Order No. Accuracy Mass (g)
(carbide-tipped) (carbide-tipped)
0 - 30mm 0.001mm 422-411 ±3µm 350
25 - 55mm 0.001mm 422-412 ±3µm 490
Inch/Metric Quickmike type
Metric
Range Resolution Order No. Accuracy Remarks Mass (g)
Range Graduation Order No. Accuracy Remarks Mass (g)
0 - 1.2" / .00005" / 422-421 ±.00015" Type A 350
122-101 ±3µm Type A 260
0 - 30.48mm 0.001mm
122-111 ±3µm Type B 260
0 - 25mm 0.01mm 1 - 2.2" / .00005" / 422-422 ±.00015" Type A 490
122-161 ±3µm Type C 275 25.4 - 55.88mm 0.001mm
122-141 ±3µm Type D 275
122-102 ±3µm Type A 300 Inch
122-112 ±3µm Type B 300
25 - 50mm 0.01mm Range Graduation Order No. Accuracy Remarks Mass (g)
122-162 ±3µm Type C 315
122-125 ±.00015" Type A 260
122-142 ±3µm Type D 315
0 - 1" .0001" 122-135 ±.00015" Type B 260
50 - 75mm 0.01mm 122-103 ±3µm Type A 360
122-151 ±.00015" Type D 275
75 - 100mm 0.01mm 122-104 ±4µm Type A 525
1 - 2" .0001" 122-126 ±.00015" Type A 300
100 - 125mm 0.01mm 122-105 ±4µm Type A 670
2 - 3" .0001" 122-127 ±.00015" Type A 360
125 - 150mm 0.01mm 122-106 ±4µm Type A 775
3 - 4" .0001" 122-128 ±.0002" Type A 525
150 - 175mm 0.01mm 122-107 ±5µm Type A 950
175 - 200mm 0.01mm 122-108 ±5µm Type A 1140

B-31
Disk Micrometers
SERIES 323, 223, 123 - Rotating Spindle
0000040191

FEATURES
• Diameter of measuring disk: .787”/ 20mm. • With a standard bar except for
• .028”/ 0.7mm (1mm: models over 100mm) 0 - 1”/ 0 - 25mm model. Technical Data
Accuracy: Refer to the list of specifications
edge thickness to enter narrow recesses. • With SPC output (Series 323). Resolution*: .00005”/0.001mm or 0.001mm
• With ratchet stop for constant force. • The Series 223 is provided with a Graduation**: .001” or 0.01mm
• Non-slip grip finish (digital models). mechanical digit counter for quick reading Flatness: .00004” / 1µm for models up to 4”/100mm
.000063” / 1.6µm for models over 4”/ 100mm
of measurements. Parallelism: .00016” / 4µm for models up to 2”/ 50mm
• Supplied in fitted plastic case. .00024” for models up to 4”
(4+R/50)µm for models up to 100mm
(Over 100mm models supplied wooden (5+R/75)µm for models over 100mm, R=max.
123-125 cases). range (mm)
Measurable module: 0.5-6 (0.7-11: models over 100mm)
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
*Digital models **Analog models
323-350-30
Function of Digital Model
Origin-set, Zero / ABS, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Function lock
123-103 Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

223-125 05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)

SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy Mass (g) Range Resolution Order No. Accuracy Mass (g)
0 - 25mm 0.001mm 323-250-30 ±4µm 290 0 - 1"/0 - 25.4mm .00005"/ 0.001mm 323-350-30 ±.0002" 290
25 - 50mm 0.001mm 323-251-30 ±4µm 355 1 - 2"/25.4 - 50.8mm .00005"/0.001mm 323-351-30 ±.0002" 355
50 - 75mm 0.001mm 323-252-30 ±6µm 555 2 - 3"/50 - 76.2mm .00005"/0.001mm 323-352-30 ±.0003" 555
75 - 100mm 0.001mm 323-253-30 ±6µm 610 3 - 4"/76.2 - 101.6mm .00005"/0.001mm 323-353-30 ±.0003" 610

Metric Mechanical counter model Inch Mechanical counter model

Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 223-101 ±4µm 260 0 - 1" .001" 223-125 ±.0002" 260
25 - 50mm 0.01mm 223-102 ±4µm 290

Metric Inch
Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 123-101 ±4µm 200 0 - 1" .001" 123-125 ±.0002" 200
123-113* ±4µm 230 1 - 2" .001" 123-126 ±.0002" 250
25 - 50mm 0.01mm 123-102 ±4µm 250 2 - 3" .001" 123-127 ±.0003" 300
123-114* ±4µm 270 3 - 4" .001" 123-128 ±.0003" 375
50 - 75mm 0.01mm 123-103 ±6µm 300
123-115* ±6µm 320
75 - 100mm 0.01mm 123-104 ±6µm 375 Root tangent length of gear (En)
123-116* ±6µm 390
100 - 125mm 0.01mm 123-105 ±7µm 520
125 - 150mm 0.01mm 123-106 ±7µm 570
150 - 175mm 0.01mm 123-107 ±8µm 730
175 - 200mm 0.01mm 123-108 ±8µm 890
200 - 225mm 0.01mm 123-109 ±8µm 1000
225 - 250mm 0.01mm 123-110 ±9µm 1200
250 - 275mm 0.01mm 123-111 ±9µm 1410 En

275 - 300mm 0.01mm 123-112 ±9µm 1680 Note: Root tangent length measurement is not
available for some types of gears.
*The measuring disks have carbide tips.
Note: The disk diameter of models over 100mm is 30mm.

B-32
DIMENSIONS
Unit: mm
Digital models up to 75mm Analog models up to 50mm
b L 42.5 2.3 3 43 17 b L 14.5 3 47 17
a 35.2 a 31.5

ø6.35
ø6.35

ø18

ø18
c

c
Digital models up to 75mm Analog over 50mm
b L 14.5 2 47.2 2.3 3 43 17 b L 14.5 3 47 17
a 32 a 31.5
ø6.35

ø6.35
ø18

ø18
c
c

Range L a b c ød øe t
t ød
0 - 1" / 0 - 25mm 37.5 (39.7) 6 (4.5) 14 (9.2) 25 (25.4) 20 8 (9.8) 0.7
1 - 2" / 25 - 50mm 62.5 (65.6) 6 (5.4) 14 (11) 32 (31.9) 20 8 (9.8) 0.7
2 - 3" / 50 - 75mm 87 (90.7) 5.5 (5.5) 11 (12.2) 49 (50) 20 8 (9.8) 0.7
3 - 4" / 75 - 100mm 112 (112.5) 5.5 (5.5) 11 (13.5) 63 (60.5) 20 8 (9.8) 0.7 øe
4 - 5" / 100 - 125mm 137.5 6 12 79 30 12 1 Center
concavity
5 - 6" / 125 - 150mm 162.5 6 15 94 30 12 1
6 - 7" / 150 - 175mm 187.5 6 16 106 30 12 1
7 -8" / 175 - 200mm 212.5 6 15 118 30 12 1
8 - 9" / 200 - 225mm 237.5 6 14 130 30 12 1
9 - 10" / 225 - 250mm 262.5 6 14 143 30 12 1
10 - 11" / 250 - 275mm 287.5 6 15 156 30 12 1
11 - 12" / 275 - 300mm 312.5 6 15 169 30 12 1
Data in ( ) applies to those with carbide tipped disks.

Paper Thickness Micrometers

Technical Data
Graduation: .001” or 0.01mm
Flatness: .00004” / 1µm
Parallelism: .00012” / 3µm SERIES 169 — Non-Rotating Spindle Type Designed for Paper Thickness Measurement
Measuring Force: 8.02 ±0.8N
53.9KPa ±4.9 KPa
FEATURES
• Non-rotating spindle. DIMENSIONS
• With ratchet stop for constant force. Unit: mm
• Supplied in fitted plastic case. 13.5 37.5 14.5 3 47 15.5 17
6.2 31.3
ø14.3

ø18

0.4
ø8
25

169-101

Unit: mm

0.4
SPECIFICATIONS
Metric Inch
Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
(ø.44”)
ø14.3

0 - 25mm 0.01mm 169-101 ±4µm 230g 0 - 1" .001" 169-103 ±.0002" 230g
( ): Inch model

B-33
Disk Micrometers
SERIES 369, 227, 169 — Non-Rotating Spindle Type

FEATURES
• The Disk Micrometer is designed to easily • Speedy spindle feed of 10mm/rev. Technical Data
Accuracy: Refer to the list of specifications
measure root tangent length of spur gears (Quickmike type). Resolution*: .00005"/0.001mm or 0.001mm
and helical gears. • Diameter of measuring disk: .787” / 20mm Graduation**: .001” or 0.01mm
• With ratchet stop for constant force. Flatness: .00004” / 1µm
• Non-rotating spindle eliminates torque on Parallelism: 4µm / .00016” for models up to 2” / 50mm
workpiece. • With SPC output (Series 369). 6µm / .00024” for models over 2” / 50mm
• With standard bar except 0 - 15mm, 0 - .6” 0 • Supplied in fitted plastic case. Measurable module: 0.5-6
Display*: LCD
- 25mm, 0 - 1”, 0 - 30mm & 0 - 1.2” model. • Non-slip grip finish (digital models). Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
(1 year: Quickmike type, 3 years: Quickmike
type with fine-loading)
Quickmike type Series 227: Refer to page B-6 for more information.
369-350-30 *Digital models **Analog models

Function of Digital Model

Origin-set, Zero / ABS, Data hold, Data output,
369-421 inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

Quickmike type with adjustable measuring force 05CZA662: SPC cable with data switch (40” / 1m)
05CZA663: SPC cable with data switch (80” / 2m)
937387: SPC cable for Quickmike type (40” / 1m)
965013: SPC cable for Quickmike type (80” / 2m)

227-221

169-201

SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy
0 - 25mm 0.001mm 369-250-30 ±4µm 0 - 1" / 0 - 25.4mm .00005" / 0.001mm 369-350-30 ±.0002"
25 - 50mm 0.001mm 369-251-30 ±4µm 1 - 2" / 25.4 - 50.8mm .00005" / 0.001mm 369-351-30 ±.0002"
50 - 75mm 0.001mm 369-252-30 ±6µm 2 - 3" / 50.8 - 76.2mm .00005" / 0.001mm 369-352-30 ±.0003"
75 - 100mm 0.001mm 369-253-30 ±6µm 3 - 4" / 76.2 - 101.6mm .00005" / 0.001mm 369-353-30 ±.0003"

Metric Quickmike type Inch/Metric Quickmike type

Range Resolution Order No. Accuracy Range Resolution Order No. Accuracy
0 - 30mm 0.001mm 369-411 ±4µm 0 - 1.2" / 0 - 30.48mm .00005" / 0.001mm 369-421 ±.0002"
25 - 55mm 0.001mm 369-412 ±4µm 1 - 2.2" / 25.4 - 55.88mm .00005" / 0.001mm 369-422 ±.0002"

Metric Quickmike type with adjustable measuring force

Range Resolution Order Accuracy Measuring
No. force
0 - 10mm 0.001mm 227-223 ±4µm 2N - 10N
0 - 15mm 0.001mm 227-221 ±4µm 0.5N - 2.5N

Metric Inch
Range Graduation Order No. Accuracy Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 169-201 ±4µm 0 - 1" .001" 169-203 ±.0002"
25 - 50mm 0.01mm 169-202 ±4µm 1 - 2" .001" 169-204 ±.0002"
50 - 75mm 0.01mm 169-205 ±6µm 2 - 3" .001" 169-206 ±.0003"
75 - 100mm 0.01mm 169-207 ±6µm 3 - 4" .001" 169-208 ±.0003"

B-34
DIMENSIONS AND MASS
Unit: mm

Digital models up to 75mm Adjustable measuring force type

b L 42.5 2.3 3 41 11.5 17 12.2 28.8 69.6 54 18.1
a 45.6

ø14.3
14.2

ø6.35

ø24.5
ø24.9
ø18
ø6.35

25
ø14 0.4
c

Digital models over 75mm Analog models up to 50mm

b L 14.5 6.5 47.2 2.3 3 41 11.5 17 b L 14.5 3 47 15.5 17
a 32 b 31.5

ø18
ø18

ø8
ø6.35

c
c

Quickmike type Analog models over 50mm

b L 65.6 50.4 b L 14.5 3 47 15.5 17
46.3 4 a 31.5
a
ø24.9

ø18
ø8
c

0.7 ø20 (ø14.3)

Digital model Analog model
(0.4) Range L a b c Mass (g) Range L a b c Mass (g)
0 - 25mm / 0 - 1" 58.5 12.9 7 32 340 0 - 25mm / 0 - 1" 37.5 6 13.5 25 230
25 - 50mm / 1 - 2" 83.5 12.9 9.8 47 480 25 - 50mm / 1 - 2" 62.5 6 13.5 32 280
ø8 50 - 75mm / 2 - 3" 108.5 12.9 11.2 60 635 50 - 75mm / 2 - 3" 87 5.5 13 49.5 315
75 - 100mm / 3 - 4" 112.5 5.5 13.5 60.5 475 75 - 100mm / 3 - 4" 112 5.5 13 63.5 400
0 - 30mm* / 0 - 1.2" 63.8 13.5 8.5 36 360
( ): Adjustable measuring
force type 25 - 55mm* / 1 - 2.2" 88.8 13.5 10.3 47 490
*Quickmike type

B-35
Gear Tooth Micrometers
SERIES 324, 124 — Interchangeable Ball Anvil-Spindle Tip Type
0000040191

FEATURES
• IP65 water/dust protection (Series 324). • Interchangeable ball anvil-spindle tips
• Measures over-pin diameter of gears for various gear modules (0.5 - 5.25) are Technical Data
with precision steel (carbide) ball-tipped optional. Accuracy: Refer to the list of specifications
measuring faces. • With Ratchet Stop for constant force. Resolution*: 0.001mm or .00005"/0.001mm
Graduation**: 0.01mm
• With a standard bar except 0 - 25mm and • With SPC output (Series 324). Display*: LCD
0 - 1” model • Supplied in fitted plastic case Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
• Non-slip grip finish (digital models) (Models over 150mm have wooden case). Dust/Water protection level*: IP65
*Digital models **Analog models

Function of Digital Model

Zero / ABS, Data hold, Data output, Preset,
324-351-30 inch/mm conversion (on inch/metric models only)
Function Lock, 2 Presets
Alarm: Low voltage, Counting value composition error

Optional Accessories
05CZA662: SPC cable with data switch (1m / 40”)*
05CZA663: SPC cable with data switch (2m / 80” )*
*Only for digital models
124-173
Shown with optional ball anvils

SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy Mass (g) Range Resolution Order No. Accuracy Mass (g)
0 - 25mm 0.001mm 324-251-30 ±4µm 400 0 - 1"/0 - 25mm .00005”/0.001mm 324-351-30 ±.0002" 400
25 - 50mm 0.001mm 324-252-30 ±4µm 490 1 - 2"/25 - 50mm .00005”/0.001mm 324-352-30 ±.0002" 490
50 - 75mm 0.001mm 324-253-30 ±4µm 530 2 - 3"/50 - 75mm .00005”/0.001mm 324-353-30 ±.0002" 530
75 - 100mm 0.001mm 324-254-30 ±5µm 600 3 - 4"/75 - 100mm .00005”/0.001mm 324-354-30 ±.00025" 600

Metric
Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 124-173 ±4µm 295
25 - 50mm 0.01mm 124-174 ±4µm 400 Interchangeable ball anvil-spindle tip set:
50 - 75mm 0.01mm 124-175 ±4µm 460
Diameter of ball anvil Order No. Gear module Diametral
75 - 100mm 0.01mm 124-176 ±5µm 540 pitch
100 - 125mm 0.01mm 124-177 ±5µm 640 0.8mm 124-801* 0.5 - 0.55 50
125 - 150mm 0.01mm 124-178 ±5µm 760 1mm 124-802* 0.6 - 0.65 45
150 - 175mm 0.01mm 124-179 ±6µm 900 1.191mm (3/64") 124-803* 0.7 - 0.8 35 - 30
175 - 200mm 0.01mm 124-180 ±6µm 1060 1.5mm 124-821* 0.9 - 1 28 - 26
200 - 225mm 0.01mm 124-181 ±6µm 1230 1.588mm (1/16") 124-804* 0.9 - 1 28 - 26
2mm 124-805* 1.25 22
225 - 250mm 0.01mm 124-182 ±7µm 1430
2.381mm (3/32") 124-806 1.5 17
250 - 275mm 0.01mm 124-183 ±7µm 1620
2.5mm 124-822 1.5 17
275 - 300mm 0.01mm 124-195 ±7µm 2070 3mm 124-807 1.75 15
3.175mm (1/8") 124-808 — 14
DIMENSIONS AND MASS 3.5mm 124-823 2 13
Unit: mm Range L a Mass (g) 3.969mm (5/32") 124-809 2 13
18 L 14.5 3 47 17 0 - 25mm 64.5 32 295 4mm 124-810 2.25 11
(28) (28) (50)
27.5 25 - 50mm 90 45 400 4.5mm 124-824 2.5 10
(35) 50 - 75mm 115.6 65 460 4.763mm (3/16") 124-811 2.5 10
75 - 100mm 140.6 79 540 5mm 124-812 2.75 9
5.556mm (7/32") 124-813 3.0 - 3.25 8
ø6.35

100 - 125mm 165.6 93 640

(ø8)

(ø21)
ø18

125 - 150mm 190.5 105 760 6mm 124-814 3.5 7

a

150 - 175mm 215.5 120 900 6.35mm (1/4") 124-815 3.75 7

175 - 200mm 240.5 130 1060 7mm 124-816 4.0 6.5
200 - 225mm 265.5 147 1230 7.144mm (9/32") 124-817 4.25 6
225 - 250mm 290.5 165 1430 7.938mm (5/16") 124-818 4.5 5.5
250 - 275mm 315.5 171 1620 8mm 124-819 4.75 5.5
( ): 275-300mm model 275 - 300mm 353 187 2070 8.731mm (11/32") 124-820 5.0 - 5.25 5
*Carbide-tipped type

B-36
 Screw Thread Micrometers
SERIES 125

FEATURES
• Provided with a 60 degree V-anvil and • With ratchet stop for constant force.
conical spindle for easily measuring pitch • With a standard bar for zero point
diameters of metric or unified screw adjustment except 0 - 25mm model.
threads. • Supplied in fitted plastic case.

125-103

Technical Data
Accuracy: ±(2+R/75)µm, R=max. range (mm)
Graduation: 0.01mm
Spindle feed error: 3µm
SPECIFICATIONS
Metric
Range Graduation Order No. Screw to be measured
(Metric/Unified)
0 - 25mm 0.01mm 125-101 0.4 - 0.5mm/64 - 48TPI
125-102 0.6 - 0.9mm/44 - 28TPI
125-103 1 - 1.75mm/24 - 14TPI
125-104 2 - 3mm/13 - 9TPI
125-105 3.5 - 5mm/8 - 5TPI
25 - 50mm 0.01mm 125-106 0.4 - 0.5mm/64 - 48TPI
125-107 0.6 - 0.9mm/44 - 28TPI
125-108 1 - 1.75mm/24 - 14TPI
125-109 2 - 3mm/13 - 9TPI
125-110 3.5 - 5mm/8 - 5TPI
50 - 75mm 0.01mm 125-111 0.6 - 0.9mm/44 - 28TPI
125-112 1 - 1.75mm/24 - 14TPI
125-113 2 - 3mm/13 - 9TPI
125-114 3.5 - 5mm/8 - 5TPI
125-115 5.5 - 7mm/4.5 - 3.5TPI
75 - 100mm 0.01mm 125-116 0.6 - 0.9mm/44 - 28TPI
125-117 1 - 1.75mm/24 - 14TPI
125-118 2 - 3mm/13 - 9TPI
125-119 3.5 - 5mm/8 - 5TPI
125-120 5.5 - 7mm/4.5 - 3.5TPI

DIMENSIONS AND MASS

Unit: mm
18 L 14.5 3 47 17 L 14.5 3 47 17
4.9 32.3 4.7 32.3
Range L a Mass (g)
0 - 25mm 37.2 25 200
25 - 50mm 62.2 32 250
ø6.35
ø6.35

ø18
ø18
a

50 - 75mm 87 49.5 260

a

75 - 100mm 112 63.5 330

B-37
Screw Thread Micrometers
SERIES 326, 126 — Interchangeable Anvil-Spindle Tip Type
0000040191

FEATURES
• IP65 water/dust protection (Series 326). • With ratchet stop for constant force. Technical Data
• 60 degree or 55 degree V-anvil and conical • With SPC output (Series 326). Resolution*: 0.001mm or .00005"/0.001mm
spindle (interchangeable) are optional, • With a standard bar except 0 - 25mm and Graduation**: 0.01mm or .001"
Spindle feed error: 3µm / .00012”
which are made of high-grade steel, 0 - 1” model. Display*: LCD
hardened and precision ground. • Supplied in fitted plastic case. Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
• Non-slip grip finish (digital models). Dust/Water protection level*: IP65
*Digital models **Analog models
126-125
Shown with optional anvils Function of Digital Model
Zero / ABS, Data hold, Data output, 2 Presets, Function Lock.
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error

326-351-30 Optional Accessories

05CZA662: SPC cable with data switch (1m / 40”)*
05CZA663: SPC cable with data switch (2m / 80”)*
*Only for digital models
(See page B-51.): Standard for screw thread micrometer
SPECIFICATIONS
Metric Digital model Inch/Metric Digital model
Range Resolution Order No. Accuracy Mass (g) Range Resolution Order No. Accuracy Mass (g)
0 - 25mm 0.001mm 326-251-30 ±4µm 350 0 - 1" / 0 - 25.4mm .00005" / 0.001mm 326-351-30 ±.0002" 350
25 - 50mm 0.001mm 326-252-30 ±4µm 380 1 - 2" / 25.4 - 50.8mm .00005" / 0.001mm 326-352-30 ±.0002" 380
50 - 75mm 0.001mm 326-253-30 ±4µm 470 2 - 3" / 50.8 - 76.2mm .00005" / 0.001mm 326-353-30 ±.0002" 470
75 - 100mm 0.001mm 326-254-30 ±5µm 510 3 - 4" / 76.2 - 101.6mm .00005" / 0.001mm 326-354-30 ±.00025" 510

Metric Inch
Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 126-125 ±4µm 240 0 - 1" .001" 126-137 ±.0002" 240
25 - 50mm 0.01mm 126-126 ±4µm 290 1 - 2" .001" 126-138 ±.0002" 290
50 - 75mm 0.01mm 126-127 ±4µm 390 2 - 3" .001" 126-139 ±.0002" 390
75 - 100mm 0.01mm 126-128 ±5µm 450 3 - 4" .001" 126-140 ±.00025" 450
100 - 125mm 0.01mm 126-129 ±5µm 530 4 - 5" .001" 126-141 ±.00025" 530
125 - 150mm 0.01mm 126-130 ±5µm 620 5 - 6" .001" 126-142 ±.00025" 620
150 - 175mm 0.01mm 126-131 ±6µm 730 6 - 7" .001" 126-143 ±.0003" 730
175 - 200mm 0.01mm 126-132 ±6µm 860 Anvil-spindle tip set:
200 - 225mm 0.01mm 126-133 ±6µm 1,030 Inch With anvil set (126 - 800)
Set Order
225 - 250mm 0.01mm 126-134 ±7µm 1,200 Range Graduation Order No. Accuracy Mass (g) Applications Tip Information
No.
250 - 275mm 0.01mm 126-135 ±7µm 1,370 0 - 1" .001" 126-901 ±.0002" 240 Threads Per Individual
275 - 300mm 0.01mm 126-136 ±7µm 1,540 1 - 2" .001" 126-902 ±.0002" 290 Pitch (mm)
Inch Order No.
2 - 3" .001" 126-903 ±.0002" 390 64-48 (M1) 0.4-0.5 126-801
3 - 4" .001" 126-904 ±.00025" 450 Metric Screw, 44-28 (M2) 0.6-0.9 126-802
4 - 5" .001" 126-905 ±.00025" 530 Unified screw 126-800
24-14 (M3) 1-1.75 126-803
(60° threads)
5 - 6" .001" 126-906 ±.00025" 620 13-9 (M4) 2-3 126-804
8-5 (M5) 3.5-5 126-805
DIMENSIONS 4.5-3.5 (M6) 5.5-7 126-806
Unit: mm Range L a 60-48 - 126-811
0 - 25mm / 0 - 1" 39.5 25 48-40 - 126-812
25 - 50mm / 1 - 2" 64.5 32 40-32 - 126-813
18 L 14.5 3 47 17
50 - 75mm / 2 - 3" 90 45 32-24 - 126-814
27.5
75 - 100mm / 3 - 4" 115.6 65 Whitworth 24-18 - 126-815
100 - 125mm / 4 - 5" 140.6 79 Screw 126-810
(55° threads) 18-14 - 126-816
125 - 150mm / 5 - 6" 165.6 93
ø18

150 - 175mm / 6 - 7" 190.5 105

14-10 - 126-817
ø6.35

175 - 200mm / 7 - 8" 215.5 120 10-7 - 126-818

Throat depth a

200 - 225mm / 8 - 9" 240.5 130 7-4.5 - 126-819

225 - 250mm / 9 -10" 265.5 147 4.5-3.5 - 126-820
250 - 275mm / 10 - 11" 290.5 165
Features: 60 degree or 55 degree V-anvil and conical spindle
275 - 300mm / 11 - 12" 315.5 171 (interchangeable) are optional, which are made of high-grade
special steel, hardened and precision ground.
Storage box included.

B-38
 3-Wire Thread Measuring System
Individual Holder and Wire Set FEATURES
• Fast and accurate method of thread
measuring available for use with
micrometer
Wire holders and 3 thread measuring
wires assembled for each thread pitch.

Micrometer with a graduation of .00005".

Vertically,
adjustable
platform
for positioning
and supporting
threaded parts
and plug gages
PD M
between anvil
of micrometer.

Base Assembly
W Locking clamp holds micrometer
securely in place.
INCH STANDARD HOLDERS
AND WIRES SETS
Compatible with micrometers with
Order No. 1,2 Threads Per Thread Measuring 0.25” anvils & spindles.
Inch Wire Diameter
64AAA201 120 .00481
PD = Pitch Diameter
64AAA202 100 .00577
M = Measurement over wires 64AAA203 95 .00601
W = Wire diameter 64AAA204 90 .00642
C = Constant Stand Assembly
64AAA205 80 .00722
Order No. 156-106
C = .86603 x Pitch (inches) -3W 64AAA206 72 .00802
P.D. = M-C 64AAA207 64 .00902
W = .57735 x P 64AAA208 56 .01031 METRIC HOLDERS
64AAA209 50 .01155 AND WIRES SETS
64AAA210 48 .01203
Order No.1 Pitch mm Diameter Inch Diameter
64AAA211 44 .01312
64AAA251 .2mm .1155 .00455
64AAA212 40 .01443
64AAA252 .225mm .1299 .00511
64AAA213 36 .01604
64AAA253 .25mm .1443 .00568
64AAA214 32 .01804
Applications 64AAA215 30 .01925
64AAA254 .30mm .1732 .00682
• Measure set of thread plug gages and working thread 64AAA255 .35mm .2021 .00796
64AAA216 28 .02062
plug gages. 64AAA256 .40mm .2309 .00909
64AAA217 27 .02138
• Monitor the wear on working thread plug gages. 64AAA257 .45mm .2598 .01023
• Monitor and control pitch diameter variation 64AAA218 26 .02221
64AAA219 24 .02406 64AAA258 .50mm .2887 .01137
during thread fabrication.
• Reduce measurement time to a fraction of the time 64AAA220 22 .02624 64AAA259 .55mm .3175 .01250
normally taken using the traditional three wire method. 64AAA221 20 .02887 64AAA260 .60mm .3464 .01364
• Use in conjunction with go/no-go thread ring gages to 64AAA222 18 .03208 64AAA261 .70mm .4041 .01591
control thread size to the most demanding specifications. 64AAA223 16 .03608 64AAA262 .75mm .4330 .01705
• Determine out of roundness and taper that may exist
64AAA224 14 .04124 64AAA263 .80mm .4619 .01818
in threaded parts.
• Applications for preplating and post plating thread 64AAA225 13 .04441 64AAA264 .85mm .4907 .01932
measurement. 64AAA226 12 .04811 64AAA265 .90mm .5196 .02046
64AAA227 11.5 .05020 64AAA266 1.00mm .5774 .02273
64AAA228 11 .05249 64AAA267 1.25mm .7217 .02841
64AAA229 10 .05774 64AAA268 1.50mm .8660 .03410
Tolerance of Wires: 64AAA230 9 .06415 64AAA269 1.75mm 1.0104 .03978
• Diameter +/- .000010” 64AAA231 8 .07217 64AAA270 2.00mm 1.1547 .04546
• Roundness +/- .000010” 64AAA232 7.5 .07698 64AAA271 2.50mm 1.4434 .05683
• Surface finish 2 micro inches AA, lapped. 64AAA233 7 .08248 64AAA272 3.00mm 1.7321 .06819
• Hardness HRC 59-64 64AAA234 6 .09623
• Certification of accuracy included. 64AAA273 3.50mm 2.0207 .07956
64AAA235 5.5 .10497
64AAA274 4.00mm 2.3094 .09092
• Traceable to NIST.
64AAA236 5 .11547 1
For 6.35mm Spindle Diameter holder only, add “H” suffix to Order No. (i.e. 64AAA201H)
• Meets or exceeds all ANSI and ISO specs. 1
For 6.35mm Spindle Diameter holder only, add "H" suffix to Order No. (i.e. 64AAA201H)
2
For 8mm Spindle Diameter holder only, add “H8” suffix to Order No. (i.e. 64AAA201H8)

B-39
Can Seam Micrometers
SERIES 147

FEATURES
• Measures the width, height, and depth of
can seams.
• Three types of micrometers are available
for: steel cans, aluminum cans and
Technical Data
sprayer cans. Accuracy: ±.00012” / ±3µm
• Supplied in fitted carton. Graduation: .001” / 0.01mm

147-103

SPECIFICATIONS
Metric Inch
Range Graduation Order No. Remarks Range Graduation Order No. Remarks
147-103 for steel cans 0 - .5" .001" 147-104 for steel cans
0 - 13mm 0.01mm 147-105 for aluminum cans 147-106 for aluminum cans
147-202 for sprayer cans 147-201 for sprayer cans
147-103
147-104
for cans
(for depth measurements up to 5mm)

DIMENSIONS AND MASS

147-105
Unit: mm
for aluminium cans 147-106
22 15 16
ø15
11.25

11.25
10.65

2
ø20

MASS: 65g
40°

9.25

53 147-103
147-104 for sprayer cans 147-202
147-201
1.5 20 15 16
0.5
ø15

45°
10.15 1.3

ø20

MASS: 65g
9.3

52.5 147-105
147-106
22.5 16
1.5 15
ø15

40°
ø20

MASS: 65g
11.25

9.25

38.5 147-202
147-201

B-40
 Hub Micrometers
SERIES 147

Technical Data FEATURES

Accuracy: Refer to the list of specifications • With a standard bar except for
Graduation: 0.01mm / .001” • Measures hub thickness and shoulders
Flatness: 0.6µm / .000024” inside a bore. 0 - 1” / 0 - 25mm model.
Parallelism: (2+R/100)µm, R=max. range (mm)
• With ratchet stop for constant force. • Supplied in fitted plastic case.
[.00008” + .00004” (L/4)]”, L = Max. range (inch)
Measuring faces: Carbide tipped

147-301

Unit: mm
147-351
h3
h1

SPECIFICATIONS
H

Metric Inch
h2

Range Graduation Order No. Accuracy Range Graduation Order No. Accuracy
0 - 25mm 0.01mm 147-301 ±2µm 0 - 1" .001" 147-351 ±.0001"
25 - 50mm 0.01mm 147-302 ±2µm 1 - 2" .001" 147-352 ±.0001"
50 - 75mm 0.01mm 147-303 ±2µm 2 - 3" .001" 147-353 ±.0001"
Range h1 h2 h3 H Mass (g) 75 - 100mm 0.01mm 147-304 ±3µm 3 - 4" .001" 147-354 ±.00015"
0 - 1" / 0 - 25mm 6 8.5 13.5 17.5 135
1 - 2" / 25 - 50mm 6.5 11 14 20.5 150
3 - 4" / 50 - 75mm
4 - 5" / 75 -100mm
6.5
6.5
11
11
13
13
20.5
20.5
170
185 Wire Micrometers
SERIES 147
FEATURES
• Designed for measuring wire thickness. 147-402
• Also used to measure the diameter of a
small ball.
• Supplied in fitted plastic case.

147-401
SPECIFICATIONS
Technical Data Metric Inch
Graduation: .0001” or 0.01mm
Flatness: .000024” / 0.6µm Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
Parallelism: .00005” / 1.3µm 0 - 10mm 0.01mm 147-401 ±3µm 65 0 - .4" .0001" 147-402* ±.00015" 65
Measuring faces: Carbide tipped * .0001” reading is obtained with vernier.

DIMENSIONS AND MASS

101
14.5 15 14.5
2.5 12.5

Unit: mm
ø16

MASS = 65g
ø6.35

ø15
2

B-41
Digital Outside Micrometers
SERIES 193

FEATURES Technical Data

Counter reading: 0.01mm or .001"
• Mechanical digit counter with 0.01mm • With a standard bar except for 0-25mm / Graduation: 0.01mm, 0.001mm, .001" or .0001"
or .001" reading for quick and error-free 0 -1” model. Flatness: 0.6µm / .000024”
Parallelism: (2+R/100)µm, R=max. range (mm)
reading. • Supplied in fitted plastic case. [.00008” + .00004” (L/4)]”, L= max. range (inch)
Measuring faces: Carbide tipped

193-211

SPECIFICATIONS 193-916
Metric With ratchet stop Inch With friction thimble
Range Graduation Order No. Accuracy Range Graduation Order No. Accuracy
0.01mm 193-101 ±2µm 0 - 1" .0001" 193-211* ±.0001"
0 - 25mm
0.001mm 193-111* ±2µm 1 - 2" .0001" 193-212* ±.0001"
0.01mm 193-102 ±2µm *.0001" reading is obtained with vernier.
25 - 50mm
0.001mm 193-112* ±2µm
0.01mm 193-103 ±2µm
50 - 75mm
0.001mm 193-113* ±2µm Inch With ratchet stop
0.01mm 193-104 ±3µm Range Graduation Order No. Accuracy
75 - 100mm
0.001mm 193-114* ±3µm 2 - 3" .0001" 193-213* ±.0001"
*0.001mm reading is obtained with vernier. 3 - 4" .0001" 193-214* ±.00015"
*.0001" reading is obtained with vernier.
Metric Micrometer sets
Range Order No. Included in set
0 - 75mm 193-901 • 193-101, 193-102, 193-103
(3 pcs./set) • 2 micrometer standards Inch Micrometer sets
0 - 75mm 193-915 • 193-111, 193-112, 193-113, Range Order No. Included in set
(3 pcs./set) • 2 micrometer standards
0 - 3" 193-923 • 193-211, 193-212, 193-213
0 - 100mm 193-902 • 193-101, 193-102, 193-103, (3 pcs./set) • 2 micrometer standards
(4 pcs./set) 193-104
• 3 micrometer standards
0 - 100mm 193-916 • 193-111, 193-112, 193-113,
(4 pcs./set) 193-114
• 3 micrometer standards

DIMENSIONS AND MASS

Unit: mm
Models up to 100mm / 4”
b L 25.5 3 47 17 b Range L L a
14.5 b
50.5 c3 Mass
47 (g) 17
a 27.5 a 0 - 25mm / 0 - 1" 30
27.5 2.5 5 26 224
25 - 50mm / 1 - 2" 55 2.5 8 32 275
50 - 75mm / 2 - 3" 80 2.5 9 45 379
ø6.35

ø6.35
ø18

ø18

75 - 100mm / 3 - 4" 105 2.5 9 57 489

c

Note: The shape of the thimble changes

C

on the model with friction thimble.

B-42
 Indicating Micrometers
SERIES 510
Technical Data
Spindle feed error: 3µm / .00012”
Dial indication accuracy: 1µm / .00004” FEATURES
Dispersion of indication: 0.4µm / .00002” • Retractable anvil with indicator for three- • With a standard bar except for 0 - 25mm /
Graduation: 0.001mm or .0001"
Dial reading: 0.001mm or .00005" wire measurements of pitch diameter 0 - 1” model.
Flatness: 0.3µm / .000012” of precision screws and parallelism • IP protection level: 54
Parallelism: 0.6µm / .000024” for models up to 50mm / 2”
1µm / .00004” for models over 50mm / 2” measurements. • Supplied in fitted plastic case.
Measuring force: 5 - 10N (500 - 1000gf)
Measuring faces: Carbide tipped

Optional Accessories
04AZA124: ø16mm / ø.63” workpiece stopper 510-131
(not available for 25mm / 1” model)
04AZA125: ø14mm / ø.55" workpiece stopper
04AZA126: ø14mm / ø.55" workpiece stopper

Unit: mm
a

SPECIFICATIONS
Metric Inch
b

a b Range Graduation Order No. Indicating range Range Graduation Order No. Indicating range
04AZA124 16 23 0 - 25mm 0.001mm 510-121* ±0.060mm 0 - 1" .00005" 510-131* ±.0023"
04AZA125 14 20.5 510-141 510-151
4

6 04AZA126 14 15 25 - 50mm 0.001mm 510-122 ±0.060mm 1 - 2" .00005" 510-132 ±.0023"

50 - 75mm 0.001mm 510-123 ±0.060mm 2 - 3" .00005" 510-133 ±.0023"
75 - 100mm 0.001mm 510-124 ±0.060mm 3 - 4" .00005" 510-134 ±.0023"
DIMENSIONS AND MASS *Retractable anvil button on the right side. *Retractable anvil button on the right side.

Unit: mm
55.5 11.5 L 19 3 50 3.5
ø21
ø8

2010 10

Snap Meters
d

30 30
40 40
50 50 Retractable anvil
60mm 60
0.001
000000 button

Workpiece stopper (optional)

SERIES 523
Range L d Mass (g)
0 - 25mm / 0 - 1" 31.5 25 520 FEATURES
25 - 50mm / 1 - 2" 56.5 38 670 • Various types of indicators, LVDTs and
50 - 75mm / 2 - 3" 81.5 50 820
75 - 100mm / 3 - 4" 106.5 63 970
linear gages can be selected according to
the measurement applications. Indicator is optional.
• Supplied in fitted plastic case.
Technical Data
Flatness: 0.3µm / .000012”
Parallelism: 0.6µm / .000024” for models up to 50mm / 2”
1µm / .00004” for models over 50mm / 2”
Measuring force: 5 - 10N (500 - 1000gf)
Measuring faces: Carbide tipped

DIMENSIONS AND MASS 523-141

Unit: mm
89.5 L 11.5 88.8
ø16

ø10.8
SPECIFICATIONS
Metric Gage stem dia 8mm Inch Gage stem dia 3/8"
Range Order No. Anvil movement Range Order No. Anvil movement
Range d L Mass (g) 0 - 25mm 523-141 2mm 0 - 1" 523-151 .078"
0 - 25mm / 0 - 1" 25 31 710 25 - 50mm 523-142 2mm 1 - 2" 523-152 .078"
25 - 50mm / 1 - 2" 35 56 810
50 - 75mm 523-143 2mm 2 - 3" 523-153 .078"
50 - 75mm / 2 - 3" 47.5 81 920
75 - 100mm 523-144 2mm 3 - 4" 523-154 .078"
75 - 100mm / 3 - 4" 60 106 1050

B-43
Dial Snap Meters
SERIES 523

FEATURES
• Direct go/no-go judgment for mass-produced parts.
• Spindle diameter: .425” / 10.8mm
• IP protection level: 54 Technical Data
Dial indication accuracy: .00005” / 1µm
• Supplied in fitted plastic case. Indication repeatability: .00002” / 0.4µm
Dial reading: .00005” or 0.001mm
Flatness: .000012” / 0.3µm
Parallelism: .000024” / 0.6µm for models up to 2”/ 50mm
.00004” / 1µm for models over 2” / 50mm
Measuring force: 5 - 10N (500 - 1000gf)
Measuring faces: Carbide tipped

523-131

SPECIFICATIONS
Metric
Range Graduation Order No. Indicating range
0 - 25mm 0.001mm 523-121 ±0.060mm
25 - 50mm 0.001mm 523-122 ±0.060mm
50 - 75mm 0.001mm 523-123 ±0.060mm
75 - 100mm 0.001mm 523-124 ±0.060mm

Inch
Range Graduation Order No. Indicating range
0 - 1" .00005" 523-131 ±.0023"
1 - 2" .00005" 523-132 ±.0023"
2 - 3" .00005" 523-133 ±.0023"
3 - 4" .00005" 523-134 ±.0023"

DIMENSIONS AND MASS

Unit: mm
89.5 L 11.5 69.5 15

Range (Metric / Inch) d L Mass (g)

0 - 1" / 0 - 25mm 25 31 710
d

ø10.8 1 - 2" / 25 - 50mm 35 56 810

2 - 3" / 50 - 75mm 47.5 81 920
3 - 4" / 75 - 100mm 60 106 1050

B-44
 Caliper-type Micrometers
SERIES 343, 143
Technical Data FEATURES
Accuracy: Refer to the list of specifications.
• With ratchet stop for constant force. • With a standard bar except
Resolution*: 0.001mm or .00005"/0.001mm
Graduation**: 0.01mm / .001” • With SPC output (Series 343). 0 - 25mm and 0 - 1” model.
Flatness: 0.3µm / .000012” • Supplied in fitted plastic case.
Parallelism: (3+R/75)µm, R=max. range (mm) • Non-slip grip finish (digital models).
[.00012” + .00004” (L/8)]”
L = Max, range (inch)
Measuring faces: Carbide tipped
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
*Digital models **Analog models

143-121
Function of Digital Model
Origin-set, Zero-setting, Data hold, Data output,
inch/mm conversion (on inch/metric models only)
Function lock
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA662: SPC cable with data switch (1m / 40”)
05CZA663: SPC cable with data switch (2m / 80”)

343-250-30

SPECIFICATIONS
Metric Digital model
Range Resolution Order No. Accuracy Mass (g)
0 - 25mm 0.001mm 343-250-30 ±5µm 630
25 - 50mm 0.001mm 343-251-30 ±6µm 650
50 - 75mm 0.001mm 343-252-30 ±7µm 1040
75 - 100mm 0.001mm 343-253-30 ±8µm 1090

Inch / Metric Digital model

Range Resolution Order No. Accuracy Mass (g)
0 - 1" / 0 - 25.4mm .00005" / 0.001mm 343-350-30 ±.00025" 630
1 - 2" / 25.4 - 50.8mm .00005" / 0.001mm 343-351-30 ±.0003" 650
2 - 3" / 50.8 - 76.2mm .00005" / 0.001mm 343-352-30 ±.00035" 1040
3 - 4" / 76.2 - 101.6mm .00005" / 0.001mm 343-353-30 ±.0004" 1090

Metric Inch
Range Graduation Order No. Accuracy Mass (g) Range Graduation Order No. Accuracy Mass (g)
0 - 25mm 0.01mm 143-101 ±5µm 210 0 - 1" .001" 143-121 ±.00025" 210
25 - 50mm 0.01mm 143-102 ±6µm 230 1 - 2" .001" 143-122 ±.0003" 230
50 - 75mm 0.01mm 143-103 ±7µm 280 2 - 3" .001" 143-123 ±.00035" 280
75 - 100mm 0.01mm 143-104 ±8µm 330
Models with a range up to 300mm are available.

DIMENSIONS
Unit = mm
L b 3 47 17
L b 11.3 47.2 2.3 3 41 11.5 17
14 a
14 a
7.4
7.4
3.4 Thickness 3
3.4 Thickness 3
φ4

φ 6.35
φ4
25.7

5.9
25.7

5.9
12.5

φ 13
12.5

φ 18
φ 13

φ 18
φ8

B-45
Groove Micrometers
SERIES 146

FEATURES
• Flanged spindle for measuring width, • Non-rotating spindle type has two-
depth and location of grooves inside/ directional ratchet stop.
outside bores, and tubes. (Measuring force: 0.7 - 1.2N)
• Provided with two types of graduations for
inside and outside measurements.
146-131

146-133

146-221

146-222

SPECIFICATIONS
Metric Rotating spindle type Inch Rotating spindle type
Range Outside Range Inside Graduation Order No. Flange Mass (g) Range Outside Range Inside Graduation Order No. Flange Mass (g)
146-121 ø6.35mm 135 0 - 1" .055" - 1.05" .001" 146-131 ø.25" 135
0 - 25mm 1.6 - 26.5mm 0.01mm
146-122 ø12.7mm 185 146-132 ø.5" 185
25 - 50mm 26.5 - 51.5mm 0.01mm 146-123 ø12.7mm 175 1" - 2" 1.05" - 2.05" .001" 146-133 ø.5" 175
50 - 75mm 51.5 - 76.5mm 0.01mm 146-124 ø12.7mm 165 2" - 3" 2.05" - 3.05" .001" 146-134 ø.5" 165
75 - 100mm 76.5 - 101.5mm 0.01mm 146-125 ø12.7mm 160 3" - 4" 3.05" - 4.05" .001" 146-135 ø.5" 160

Metric Non-rotating spindle type Inch Non-rotating spindle type

Range Outside Range Inside Graduation Order No. Flange Mass (g) Range Outside Range Inside Graduation Order No. Flange Mass (g)
146-221 ø6.35mm 135 0 - 1" .055" - 1.05" .001" 146-231 ø.25" 135
0 - 25mm 1.6 - 26.5mm 0.01mm
146-222 ø12.7mm 185 146-232 ø.5" 185
25 - 50mm 26.5 - 51.5mm 0.01mm 146-223 ø12.7mm 175 1" - 2" 1.05" - 2.05" .001" 146-233 ø.5" 175
50 - 75mm 51.5 - 76.5mm 0.01mm 146-224 ø12.7mm 165 2" - 3" 2.05" - 3.05" .001" 146-234 ø.5" 165
75 - 100mm 76.5 - 101.5mm 0.01mm 146-225 ø12.7mm 160 3" - 4" 3.05" - 4.05" .001" 146-235 ø.5" 160

DIMENSIONS
Technical Data
Unit: mm Accuracy: ± .0004” / ±10µm
Parallelism: .0004” / 10µm
ø6.35

ø3.5
ø6.35

ø5

ø10

Anvil Thickness of
ø15

146-121
ø18

Inch Model (.025”*)

0.75 25 (35) 9.5 32 47 17
(.025”)* 0.75 (.025”)* (170) 3
ø12.7

ø6.35
ø12.7

146-122
ø10

ø15

ø18

0.75 25 (103.3) 32 47 17
(.025”)* 0.75 (.025”)* 3
(228.8)
ø6.35

ø3.5
ø6.35

ø5

ø10

ø15

146-221
ø18

0.75 25 (34.5) 19.5 32 47 17

(.025”)* 0.75 (.025”)* (179.5) 3
ø12.7

ø6.35
ø12.7

146-222
ø10

ø15

ø18

0.75 25 (115) 32 47 17
(.025”)* 0.75 (.025”)* 3
(240.5)

B-46
 Small Hole Gage Set
SERIES 154

FEATURES
• Used with an outside micrometer for • Extra long for gaging deep and shallow
measuring inside diameter of bores. holes, slots and similar workpieces.
• 4 sizes of gages are supplied in a fitted • Gaging surface is fully hardened to ensure
pouch. long tool life.

DIMENSIONS
b Unit: mm
Clamp
67

Order No. L a b
154-901
154-101 / 154 - 105 90 22.5 5.5
154-102 / 154 - 106 97.6 30 5.5
SPECIFICATIONS
L

154-103 / 154 - 107 102.8 35 8.5 Metric Inch

154-104 / 154 - 108 108 40 8.5 Total range Set Order No. Assortment of gages Total range Set Order No. Assortment of gages
ø3 - 13mm 154-902 ø3 - 5mm gage (154-101) .125 - .5" 154-901 .125" - .2" DIA. gage (154-105)
(4-gage set) ø5 - 7.5mm gage (154-102) DIA. .2" - .3" DIA. gage (154-106)
a

(4-gage set)
ø7.5 - 10mm gage (154-103) .3" - .4" DIA. gage (154-107)
ø10 - 13mm gage (154-104) .4" - .5" DIA. gage (154-108)

Telescoping Gage Set

SERIES 155

FEATURES
• Spring-loaded plunger expands within the
bore (or groove), allowing determination
of the internal diameter
(or groove width).
• With a knurled clamp.
• Supplied in a fitted pouch.
DIMENSIONS
c
Unit: mm
155-903
Clamp
SPECIFICATIONS
Metric Inch
Total range Set Order No. Included in set Total range Set Order No. Included in set
Order No. L a b c 8 - 150mm 155-905 8 - 12.7mm gage (155-127) .313 - 6" 155-903 .313" - .5" gage (155-121)
155-127 / 155 - 121 110 4 3 5 (6-gage set) 12.7 - 19mm gage (155-128) (6-gage set) .5" - .75" gage (155-122)
L

155-128 / 155 - 122 110 5 3.5 5.5 .75" - 1.25" gage (155-123)
19 - 32mm gage (155-129)
155-129 / 155 - 123 110 5 3.5 5.5
32 - 54mm gage (155-130) 1.25" - 2.125" gage (155-124)
155-130 / 155 - 124 150 7.5 6 8
54 - 90mm gage (155-131) 2.125" - 3.5" gage (155-125)
155-131 / 155 - 125 150 7.5 6 8
90 - 150mm gage (155-132) 3.5" - 6" gage (155-126)
155-132 / 155 - 126 150 7.5 6 8
.50 - 6" 155-904 155-122, 155-123, 155-124,
(5-gage set) 155-125, 155-126
b

.315 - 2.125" 155-907 155-121, 155-122, 155-123,

(4-gage set) 155-124

B-47
Micrometer Stands
SERIES 156

These stands are designed to allow bench-

top use with hand micrometers or other
gages.

156-106

156-105-10

156-101-10

SPECIFICATIONS
Micrometer ranges Order No. Remarks
0-1” / 0-25mm, 156-105-10 Fixed angle type
1-2” / 25-50mm
Up to 4” / 100mm 156-101-10 Adjustable angle type
5-12” / 125-300mm 156-102 Vertical type
12-40” / 300-1000mm 156-103 Vertical type
0-1” / 0-25mm 156-106 Fixed angle with
1-2” / 25-50mm platform 156-102

DIMENSIONS
Unit: mm
ø24.8
12
to
4

63

435
40

98
156-105-10

0 to 18
25°
32

35
°

400
30
90

ø28
156-102
0 to 10
113.5

910
74
62

120
35
155
220
156-101-10
40

35

750
156-103

B-48
 Color Ratchet & Color Speeder
Color ratchet Color Speeder for Ratchet Thimble
Micrometer

SPECIFICATIONS
SPECIFICATIONS
Order No. Color
Order No. Color
985056 Black
04GAA899 Black
985061 Red
04GAA900 Red
985081 Blue
04GAA901 Yellow
985071 Yellow
04GAA902 Green
985076 Green
04GAA903 Blue
985066 Brown
04AAB208 Gray
04GZA241* Gray
04GZA239** Gray
04GZA243*** Gray
*for Series 293 digital model
** up to 300mm / 12”
** over 300mm / 12”

Spindle Attachment Tip

Technical Data Ball Spline Comparator Blade Knife-edge Disk
Tip length: metric type: 10mm ±5µm
inch type: .5" ±.0002"
Spindle Dia: *1 .250” / 6.35mm
*1
Spindle diameter for 101469
(.250" ball) is .315"/ 8mm 101468 (.200" ball dia.) 208062* 208063* 208064* 208065* 208066*
101469 (.250" ball dia.) 208098 208099 208100 208101 208102

DIMENSIONS
Order No. Dimension Order No. Dimension

208098 208101

0.5
ø2

208066 208062* 208065* 30°

30°

To measure odd workpieces, several convenient anvil 208099 208102

ø3.5

30°
ø12.7
ø1

attachments are prepared by Mitutoyo. Among them the 208063* 208066*

most often used one is the ball attachment. 10

The ball attachments are hardened steel balls with .200” and
.250” diameters which are placed on the .250” and .315” * metric type
diameter anvils, respectively, by rubber caps. With these 208100
0.75

attachments, regular micrometers can measure cylindrical wall 208064*

thickness, but, .200” or .250” must be subtracted from the
readings.
Other attachments shown here are either .500” or 10mm
in length. The added amount must be subtracted from the
reading.

Micrometer Oil
207000 (30ml)

B-49
Optical Parallels
Technical Data
Flatness: .000004” / 0.1µm
Parallelism: .000008” / 0.2µm
SERIES 157 Diameter: 1.18” / 30mm

Parallelism check between measuring faces

FEATURES by means of interference fringe produced
• Designed to inspect parallelism and flatness • Each set consists of 4 thicknesses. by an optical parallel.
of measuring faces of micrometers. • Supplied in fitted wooden case. The parallelism between the measuring faces can be
determined as follows--place the optical parallel to the anvil
and observe the number of interference fringes produced
on the spindle side under the measuring force of the
micrometers.
The parallelism is about 1µm (0.32µm x 3 = 0.96µm).
Fringe on the anvil side must not be more than one.

Viewing direction Viewing direction

of the spindle of the anvil

Optical parallel
Spindle Anvil

SPECIFICATIONS
Metric Inch
Range of micrometer Order No. Assortment of parallels Range of micrometer Order No. Assortment of parallels
to be checked (Thickness of parallel) to be checked (Thickness of parallel)
0-25mm 157-903 12.00mm (157-101) 0-1" 157-901 .5000" (157-109)
12.12mm (157-102) .5062" (157-110)
12.25mm (157-103) .5125" (157-111)
12.37mm (157-104) .5187" (157-112)
25-50mm 157-904 25.00mm (157-105) 1-2" 157-902 1.0000" (157-113)
25.12mm (157-106) 1.0062" (157-114)
25.25mm (157-107) 1.0125" (157-115)
25.37mm (157-108) 1.0187" (157-116)

Optical Flats
SERIES 158 Flatness check of measuring faces using
interference fringe pattern produced by
FEATURES an optical flat.
• Used for inspecting the flatness of • Supplied in fitted wooden case.
micrometer's or gage block's measuring Viewing direction

faces with high accuracy.

Optical flat Optical flat

Anvil Anvil

SPECIFICATIONS
Metric Inch
Flatness Order No. Diameter/Thickness Flatness Order No. Diameter/Thickness
0.2µm 158-117 45mm/12mm .000004" 158-122 1.8"/.5"
158-119 60mm/15mm 158-124 2.4"/.6"
0.1µm 158-118 45mm/12mm
158-120 60mm/15mm

B-50
Technical Data
Micrometer Standards
Flatness: 0.3µm / .000012” SERIES 167
Parallelism: 2µm / .00008”

FEATURES
• Used for the zero point setting of outside expansion due to body temperature.
micrometers. • Supplied in fitted carton up to
• Flat and lapped measuring faces. 500mm / 20” and wooden case for over
• Heat insulating handle to prevent 525mm / 21” length.
167-108

167-103
Inch DIMENSION
Length (L) Order No. Diameter (D) Accuracy
25mm - 75mm / 1 - 3” 200mm - 475mm / 8 - 19” Unit: mm
41” 167-405 .47” .0004”

D
12.7

ø14
42” 167-406 .47” .0004”
43” 167-407 .47” .0004” L 11 L

44” 167-408 .47” .0004” 100mm - 175mm / 4 - 7” 500mm - 1000mm / 20 - 40”

D
45” 167-409 .47” .0004”

ø13

ø17
D
46” 167-410 .47” .0004” L L

47” 167-411 .47” .0004”

48”
49”
167-412
167-413
.47”
.47”
.0004”
.0004”
SPECIFICATIONS
50” 167-414 .47” .0004” Metric Inch
51” 167-415 .47” .0004” Length (L) Order No. Diameter (D) Accuracy Length (L) Order No. Diameter (D) Accuracy
52” 167-416 .47” .0004” 25mm 167-101 6.35mm ±1.5µm 1" 167-141 .25" ±.00005”
53” 167-417 .47” .0004”
50mm 167-102 6.35mm ±2.0µm 2" 167-142 .25" ±.0001”
54” 167-418 .47” .0004”
55” 167-419 .47” .0004” 75mm 167-103 6.35mm ±2.5µm 3" 167-143 .25" ±.0001”
56” 167-420 .47” .0004” 100mm 167-104 7.9mm ±3µm 4" 167-144 .31" ±.0001”
57” 167-421 .47” .0004” 125mm 167-105 7.9mm ±3.5µm 5" 167-145 .31" ±.00015”
58” 167-422 .47” .0004” 150mm 167-106 7.9mm ±4µm 6" 167-146 .31" ±.00015”
59” 167-423 .47” .0004” 175mm 167-107 7.9mm ±4.5µm 7" 167-147 .31" ±.00015”
60” 167-424 .47” .0004” 200mm 167-108 9.4mm ±5.0µm 8" 167-148 .37" ±.00015”
61” 167-425 .47” .0004” 225mm 167-109 9.4mm ±5.5µm 9" 167-149 .37" ±.0002”
62” 167-426 .47” .0004”
250mm 167-110 9.4mm ±6.0µm 10" 167-150 .37" ±.0002”
63” 167-427 .47” .0004”
64” 167-428 .47” .0004” 275mm 167-111 9.4mm ±6.5µm 11" 167-151 .37" ±.0002”
65” 167-429 .47” .0004” 300mm 167-112 9.4mm ±7µm 12" 167-152 .37" ±.00025”
66” 167-430 .47” .0004” 325mm 167-113 9.4mm ±7.5µm 13" 167-153 .37" ±.00025”
67” 167-431 .47” .0004” 350mm 167-114 9.4mm ±8µm 14" 167-154 .37" ±.00025”
68” 167-432 .47” .0004” 375mm 167-115 9.4mm ±8.5µm 15" 167-155 .37" ±.00025”
69” 167-433 .47” .0004” 400mm 167-116 9.4mm ±9µm 16" 167-156 .37" ±.00025”
70” 167-434 .47” .0004” 425mm 167-117 9.4mm ±9.5µm 17" 167-157 .37" ±.00025”
71” 167-435 .47” .0004”
450mm 167-118 9.4mm ±1.0µm 18" 167-158 .37" ±.00025”
72” 167-436 .47” .0004”
73” 167-437 .47” .0004” 475mm 167-119 9.4mm ±10.5µm 19" 167-159 .37" ±.0003”
74” 167-438 .47” .0004” 500mm 167-120 11.9mm ±11µm 20" 167-160 .47" ±.0003”
75” 167-439 .47” .0004” 525mm 167-121 11.9mm ±11.5µm 21" 167-161 .47" ±.0003”
76” 167-440 .47” .0004” 550mm 167-122 11.9mm ±12µm 22" 167-162 .47" ±.0003”
77” 167-441 .47” .0004” 575mm 167-123 11.9mm ±12.5µm 23" 167-163 .47" ±.0003”
78” 167-442 .47” .0004” 600mm 167-124 11.9mm ±13µm 24" 167-164 .47" ±.0003”
79” 167-443 .47” .0004” 625mm 167-125 11.9mm ±13.5µm 25" 167-165 .47" ±.00035”
650mm 167-126 11.9mm ±14µm 26" 167-166 .47" ±.00035”
675mm 167-127 11.9mm ±14.5µm 27" 167-167 .47" ±.00035”
Micrometer Standards Set 700mm 167-128 11.9mm ±15µm 28" 167-168 .47" ±.00035”
725mm 167-129 11.9mm ±15.5µm 29" 167-169 .47" ±.00035”
Inch 750mm 167-130 11.9mm ±16µm 30" 167-170 .47" ±.00035”
Order No. Size Remarks 775mm 167-131 11.9mm ±16.5µm 31" 167-171 .47" ±.00035”
167-912* 1”-5” 5 pcs. Set (167-141, 142, 143, 144, 145) 800mm 167-132 11.9mm ±17µm 32" 167-172 .47" ±.00035”
167-913* 1”-11” 11 pcs. Set (167-141, 142, 143, 144,145, 825mm 167-133 11.9mm ±17.5µm 33" 167-173 .47" ±.00035”
146, 147, 148, 149, 150, 151) 850mm 167-134 11.9mm ±18µm 34" 167-174 .47" ±.00035”
Metric 875mm 167-135 11.9mm ±18.5µm 35" 167-175 .47" ±.00035”
Order No. Size Remarks 900mm 167-136 11.9mm ±19µm 36" 167-176 .47" ±.00035”
925mm 167-137 11.9mm ±19.5µm 37" 167-177 .47" ±.0004”
167-902* 25-125mm 5 pcs. Set (167-101, 102, 103, 104,
105) 950mm 167-138 11.9mm ±20µm 38" 167-178 .47" ±.0004”
167-903* 25-275mm 11 pcs. Set (167-101, 102, 103, 104, 975mm 167-139 11.9mm ±20.5µm 39" 167-179 .47" ±.0004”
105, 106, 107, 108, 109, 110, 111) 1000mm 167-140 11.9mm ±21µm 40" 167-180 .47" ±.0004”
*Supplied with fitted carrying case

B-51
Standards for Screw Thread Micrometers
SERIES 167 — 60 degree and 55 degree

FEATURES Technical Data

Thread angle: 55° or 60°
• Specially designed for the zero point Angle Accuracy: ±2°
setting of screw thread micrometers.
• Supplied in fitted carton.

167-264 (60°)

167-262 (60°)
SPECIFICATIONS
Metric
Length Order No. Thread angle Accuracy
25mm 167-261 60° ±4µm
Inch
167-272 55° ±4µm
50mm 167-262 60° ±5µm Length Order No. Thread angle Accuracy
167-273 55° ±5µm 1" 167-294 60° ±.00015”
75mm 167-263 60° ±6µm 167-283 55° ±.00015”
167-274 55° ±6µm 2" 167-295 60° ±.0002”
100mm 167-264 60° ±7µm 167-284 55° ±.0002”
167-275 55° ±7µm 3" 167-296 60° ±.00025”
125mm 167-265 60° ±8µm 167-285 55° ±.00025”
167-276 ±8µm 4" 167-297 60° ±.0003”
150mm 167-266 60° ±9µm 167-286 55° ±.0003”
167-277 ±9µm 5” 167-298 60° ±.00035"
175mm 167-267 60° ±10µm 167-287 55° ±.00035"
167-278 ±10µm 6” 167-299 60° ±.0004"
200mm 167-268 60° ±11µm 167-288 55° ±.0004"
167-279 ±11µm
225mm 167-269 60° ±12µm
167-280 ±12µm
250mm 167-270 60° ±13µm
167-281 ±13µm
275mm 167-271 60° ±14µm
167-282 ±14µm

Standards for V-Anvil Micrometers

SERIES 167
FEATURES
• Specially designed for the zero point
ø25mm

setting of V-anvil micrometers.

• Supplied in fitted carton.
167-329
SPECIFICATIONS
Metric Inch
Diameter Order No. Type Accuracy Diameter Order No. Type Accuracy
5mm 167-327 Plug ±2µm .2" 167-337 Plug ±.0001”
10mm 167-328 Plug ±2µm .4" 167-338 Plug ±.0001”
25mm 167-329 Plug ±2µm 1" 167-339 Plug ±.0001”
40mm 167-330 Ring ±3µm 1.6" 167-340 Ring ±.00015”
55mm 167-331 Ring ±3µm 2.2" 167-341 Ring ±.00015”
70mm 167-332 Ring ±3µm 2.8" 167-342 Ring ±.00015”
85mm 167-333 Ring ±3µm 3.4" 167-343 Ring ±.00015”

B-52
 Tool Kits
The Digimatic Tool Kits include Mitutoyo’s highly popular 0–1” / 0–25mm Digimatic
Micrometer (choose ratchet or friction type) and 0–6” / 0–150mm Digimatic Caliper with
Absolute Encoder. The case is made of handsome, solid mahogany and has space for gage
batteries. The micrometer spanner is a supplied accessory.

Order No. 64PKA068A (Inch Tool Kit)

Item No. Description
103-135 Outside Micrometer (Friction Thimble Type)
(Range: 0–1”, Graduation: .0001”)
505-742 Dial Caliper (Range: 0–6”, Dial Graduation: .001”)
182-204 6” Full-Flexible Rule (3R)
64PPP932 Mahogany Case

64PKA068A

Order No. 64PKA069A (Inch Tool Kit)

Item No. Description
103-135 Outside Micrometer (Friction Thimble Type)
(Range: 0–1”, Graduation: .0001”)
182-202 6” Full-Flexible Rule (16R)
513-518T Test Indicator Set (Range: .04”, Graduation: .001”)
505-742 675 Dial Caliper
(Range: 0–6”, Dial Graduation: .001”)
050501 Mahogany Case
The basic measuring instruments recommended 64PKA069A
for vocational students and machinist apprentices
are supplied in this kit.

Order No. 64PKA070A (Inch Tool Kit)

Item No. Description
101-117 Outside Micrometer (Friction Thimble Type)
(Range: 0–1”, Graduation: .0001”)
129-132 Depth Micrometer (with 6 pcs rods)
(Range: 0–6”, Graduation: .001”)
182-202 Full-Flexible Rule (16R)
505-742 Dial Caliper (Range: 0–6”, Graduation: .001”)
050503 Mahogany Case
For operations where depth measurements are 64PKA070A
a primary concern, this kit is ideal for measuring
depths to 6”, in addition to providing the tools
for regular precision measurements.

Order No. 64PKA071B (Inch Tool Kit)

Item No. Description
103-922 Outside Micrometer Set (3 pcs)
(Range: 0–3”, Graduation: .0001”)
141-208 Inside Micrometer (with 6 pcs rods)
182-202 Full-Flexible Rule (16R)
513-518T Test Indicator Set (Range: .04”, Graduation: .001”)
505-742 Dial Caliper (Range: 0–6”, Dial Graduation: .001”)
2416S Dial Indicator (Range: 1.0”, Graduation: .001”)
7010S Magnetic Stand
050504 Mahogany Case

64PKA071B
Most every routine inspection assignment can
be completed with the eight high-quality Mitu- Note: 050504 Mahogany Case is being
toyo precision measuring instruments provided reconfigured (not as pictured).
in this deluxe kit.

B-53
Tool Kits
Order No. 64PKA080B (Inch Tool Kit)
Item No. Description
182-102 6" Steel Rule (16R)
103-177 Micrometer (Ratchet Thimble) (Range 0-1”, Graduation .001”)
505-740 Dial Caliper (Range: 0–6”, Dial Graduation: .001”)
64PPP932 Mahogany Case

64PKA080B

Order No. 64PKA073B (Tool Kit Lite)

Item No. Description
182-102 6" Steel Rule (16R)
700-113-10 0 - 6" / 0 - 150mm MyCal Lite (Resolution: .001" / 0.1mm)
293-831-30 0 - 1" / 0 - 25.4mm MDC Lite (Ratchet Stop)
(Resolution: .00005" / 0.001mm)
64PPP932 Mahogany Case

64PKA073B

Order No. 64PKA076B (Digimatic Tool Kit)

Item No. Description
293-340-30 Digimatic Micrometer (Ratchet Stop Type)
(Range: 0 - 1" / 0 - 25.4mm, LCD Resolution: .00005" / 0.001mm)
500-196-30 Digimatic Caliper with Absolute Encoder
(Range: 0 - 6" / 0 - 150mm, LCD Resolution: .0005" / 0.001mm)
64PPP932 Mahogany Case

64PKA076B

Order No.64PKA077B (Digimatic Tool Kit)

Item No. Description
293-348-30 Digimatic Micrometer (Friction Thimble Type)
(Range: 0 - 1" / 0 - 25.4mm, LCD Resolution: .00005" / 0.001mm)
500-196-30 Digimatic Caliper with Absolute Encoder
(Range: 0 - 6" / 0 - 150mm, LCD Resolution: .0005" / 0.001mm)
64PPP932 Mahogany Case

64PKA077B

Order No.64PKA152 (Digimatic Tool Kit)

Item No. Description
293-185-30 Digimatic Micrometer (Friction Thimble Type)
(Range: 0 - 1" / 0 - 25.4mm, LCD Resolution: .00005" / 0.001mm)
500-196-30 Digimatic Caliper with Absolute Encoder
(Range: 0 - 6" / 0 - 150mm, LCD Resolution: .0005" / 0.001mm)
64PPP932 Mahogany Case

64PKA152

B-54
 Micrometer Head Selection Guide
The table below provides an outline of
Mitutoyo micrometer heads for each series
so you can locate the pages to refer to select
Variety of Specifications the micrometer head most appropriate to
With clamp nut Spindle lock
your specific application. When selecting
consider the following points:
• Dimensions
• Graduation/resolution and accuracy
• With or without spindle lock
• With or without clamping nut
Spherical face type Reverse reading type • Normal or reverse reading
• With or without ratchet stop

SELECTION TABLE
Range Series Remarks Page
0 - 1mm 110 Differential screw translator (extra-fine feeding) type B-69
0 - 2.5mm 110 Differential screw translator (extra-fine feeding) type B-69
0 - 5mm 148 Ultra-small type B-60
0 - 6.5mm 148 Fine spindle feeding of 0.1mm/rev. B-58
148 Fine spindle feeding of 0.25mm/rev. B-59
148 Small type B-60
148 Large thimble diameter for easy reading B-61
0 - 10mm 152 Fine-feeding type B-68
0 - 13mm 148 Common type in small size B-62
148 Spindle feeding of 0.25mm/rev. B-59
148 Zero-adjustable thimble type B-63
148 Large thimble diameter for easy reading B-61
110 Differential screw translator (extra-fine feeding) type B-69
0 - 15mm 149 with carbide-tipped spindle type B-64
153 Non-rotating spindle type B-67
152 Quick spindle feeding of 1mm/rev. B-68
0 - 25mm 350 Compact digital type B-57
150 Common type in middle size B-65
153 Non-rotating spindle type B-67
153 Fine graduation type B-71
151 Heavy-duty type (ø8mm spindle) B-66
152 Quick spindle feeding of 1mm/rev. B-68
152 Fine feeding type B-68
152 for XY-stage B-70
250 with digit counter type B-73
0 - 50mm 164 Digital type B-56
151 Heavy-duty type (ø8mm spindle) B-66
152 Quick spindle feeding of 1mm/rev. B-68
152 Fine-feeding type B-68
197 Non-rotating spindle and large thimble B-71

B-55
Digimatic Micrometer Heads
SERIES 164

FEATURES
• The display can be rotated up to 330˚ for Technical Data
easy reading in any position. Accuracy: Refer to the list of specifications.
• Non-rotating spindle imparts no torque on Resolution: 0.001mm or .00005"/0.001mm
the workpiece. Display: LCD
Battery: SR44 (2 pcs.), 938882
Battery life: 1.8 years

Function
Zero-setting, Data hold, Data output, Preset,
inch/mm conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error

Optional Accessories
959149: SPC cable (1m / 40”)
959150: SPC cable (2m / 80”)
164-164

SPECIFICATIONS
Metric Inch/Metric
Range Order No. Accuracy Mass (g) Range Order No. Accuracy Mass (g)
0 - 50mm 164-163 ±3µm 490 0 - 2" / 0 - 50.8mm 164-164 ±.00015" 490

DIMENSIONS
Unit: mm
79 141
（29） 15
ф49

2 14
52.2
ф11
ф8

ф18 -0.02
0

PRESET
330°
11.6
22
24.5

164-163 / 164-164

B-56
 Digimatic Micrometer Heads
SERIES 350
0000040191

FEATURES
• E quipped with digital display and output.
• 350 series IP65 models: the Digimatic output port enables inclusion in a
Measuring force: 5 - 10N statistical process control or networked measurement system.
Non-rotating device
350-261-30, 350-361-30
The non-rotating device provides no radial torsion on the
workpiece surface so that workpiece wear and deformation
are minimized. 350-251-30

ø18 -0.011
0
ø8

33
Technical Data A

Accuracy* ±2µm Metric model 14

(16)
± .0001" Inch / Metric model 41 69 21 15 16.8 15
164-171 / 164-172
Resolution: 0.001mm or .00005"/0.001mm
Display: LCD 350-381-30
Battery: SR44 (1 pc) 938882

ø18 -0.02
Battery life: Approx. 2.4 years under normal use

0
Dust/Water protection level: IP65

ø8
ø18 -0.011

350-281-30, 350-282-30, 350-283-30, 350-284-30, 350-261-30

ø49
ø11
0

54
350-381-30, 350-382-30, 350-383-30, 350-384-30, 350-361-30
SPECIFICATIONS 15
ø8

33

A 2 14
Function Metric (29)
14 79 141
Preset, inch/mm conversion
41
(on inch/metric
(16)
69
models 21
only) 15 Range Order No. Stem Spindle face Stem dia. Remarks
16.8 15
Function Lock, 2 Presets 350-251-30

12.2
164-171 / 164-172 0 - 25mm Plain Flat (carbide tip) 10mm
Alarm: Low voltage, Counting value composition error
0 - 25mm 350-252-30 w/ clamp nut Flat (carbide tip) 10mm

22
0 - 25mm 350-253-30 Plain Spherical (SR4) 10mm
Optional Accessories 0 - 25mm 350-254-30 w/ clamp nut Spherical (SR4) 10mm
ø18 -0.02

25
0

164-161 / 164-162
05CZA662: SPC cable with data switch (1m / 40") 0 - 25mm 350-281-30 Plain Flat (carbide tip) 12mm IP65
ø8

05CZA663: SPC cable with data switch (2m / 80")

ø49
ø11

0 - 25mm 350-282-30 w/ clamp nut Flat (carbide tip) 12mm IP65

54

15
0 - 25mm 350-283-30 Plain Spherical (SR4) 12mm IP65
2 4
ø16

14
0 - 25mm 350-284-30 w/ clamp nut Spherical (SR4) 4212mm IP65
114.5
(29)
79 141
0 - 25mm 350-261-30* Plain Flat
350-282 12mm
(17) IP65
(139.5)
ø6.35

M12x0.5 15
*with non-rotating device and 18mm
SR stem bushing.
12.2

ø18
Inch/Metric 350-283
22

ø12 -0.009

SR
0

Range Order No. 4 Stem Spindle face Stem dia. Remarks

350-284 (58)
25

164-161 / 164-162 0 - 1" / 0 -25.4mm 350-351-30 M12x0.5

Plain Flat (carbide tip) .375"
350-281
0 - 1" / 0 -25.4mm 350-352-30 w/ clamp nut Flat (carbide tip) .375"
0 - 1" / 0 -25.4mm 350-353-30 Plain Spherical (SR4) .375"
4
0 - 1" / 0 -25.4mm 350-354-30 w/ clamp nut 350-252-10
Spherical (SR4) 42 .375"
ø14

114.5
4
ø16

42 114.5
0 - 1" / 0 -25.4mm 350-381-30 Plain Flat (carbide tip) (17)
350-352-10 .5" (139.5)
IP65
(17) (139.5)
M9.5x0.5 350-282-10 15
350-282 0 - 1" / 0 -25.4mm 350-382-30 w/ clamp nut Flat (carbide tip) .5" IP65
ø6.35

350-382-10
ø6.35

M12x0.5 15 SR
4
SR
0 - 1" / 0 -25.4mm 350-383-30 Plain Spherical (SR4) .5" IP65
ø18

4
ø18

350-384-30 w/ clamp nut 350-253-10, 350-353-10

Stem Dia.

350-283 0 - 1" / 0 -25.4mm Spherical (SR4)

350-283-10, 350-383-10
.5" IP65
SR 350-251-10, 350-261-10
ø12 -0.009

4
SR 0 - 1" / 0 -25.4mm 350-361-30* Plain Flat .5" IP65
0

(58)

4 350-281-10, 350-381-10
350-254-10, 350-354-10
DIMENSIONS AND
350-284 MASS
(58)

*with non-rotating device and 18mm stem bushing. 350-284-10, 350-384-10 Mass: 230g
M12x0.5
350-281

4 52.7 (101)
ø14

42 114.5
350-252-10 (27.7) (126)
350-352-10 (17) (139.5)
+00.0
1
(1.5) 10 14
M9.5x0.5 350-282-10 15 .7
ø12
ø6.35

SR 350-382-10
ø18

4
ø18

ø6.35

ø6.35
ø11

ø12 -0.011

350-253-10, 350-353-10
Stem Dia.

14 ø18-0.011
0
0

350-283-10, 350-383-10
.5”

SR 350-251-10, 350-261-10
(58)

4
(58)

350-281-10, 350-381-10
350-254-10, 350-354-10 350-361-10, 350-261-10 Mass: 235g
350-284-10, 350-384-10 Mass: 230g

52.7 (101)
(27.7) (126)

ø1 2.7
+00.0
1
(1.5) 10 14
B-57
ø18
35

5
1

11
Micrometer Heads
SERIES 148 — Fine Spindle Feeding of 0.1mm/rev

FEATURES Technical Data

Graduations: 0.002mm
• Fine spindle feeding of just 0.1mm/rev for Spindle pitch: 0.1mm
extra-fine adjustment and positioning. Spindle face: Spherical of SKS3 (more than HRC60), lapped
surface
• External dimensions are compatible with Scale surface: Hard-chrome plating
conventional 0.5mm pitch heads. Fixture thickness for clamp nut: 6mm (148-243: 4mm)

Spindle pitch

148-143 148-342 148-243 Screw Thread Screw Thread

pitch= 0.1mm pitch= 0.5mm

Applications
Semiconductor wafer positioning machinery and
SPECIFICATIONS optical component alignment units, etc.
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks Precision X-Y table positioning
0 - 6.5mm 148-142 ±2µm 9.5mm Plain Spherical (SR4) —
0 - 6.5mm 148-143 ±2µm 9.5mm w/clamp nut Spherical (SR4) —
0 - 6.5mm 148-342 ±2µm 9.5mm Plain Spherical (SR4) Thicker & shorter thimble
0 - 6.5mm 148-343 ±2µm 9.5mm w/clamp nut Spherical (SR4) Thicker & shorter thimble
0 - 6.5mm 148-242 ±5µm 6mm Plain Spherical (SR3) Small thimble diameter
0 - 6.5mm 148-243 ±5µm 6mm w/clamp nut Spherical (SR3) Small thimble diameter
Precision adjustment of mirror in
holder
DIMENSIONS AND MASS
4 Unit: mm
ø14

SR ø9.5 -0.009
0
SR ø9.5 -0.09
0

4 4
ø13

Comparison of mounting dimensions between a

ø5
ø13
ø5

standard fine-pitch head and a standard conventional

9.5 3.5 M9.5x0.5 9.5 3.5 pitch head at the mid-range travel position.
(17) 31.5 (17) 31.5
23.5 (38) 23.5 (38) Unit: mm
(55)
148-142 Mass: 31g 148-143 Mass: 34g 20.5 Scale: 3mm position
6.5 9.5
4 (Operating
ø15
ø15

SR ø9.5 -0.009
0
SR ø9.5 -0.009
0 range)
4 4 3 3.5
ø6.35

Fine-pitch head
ø6.35

ø14

(spindle pitch: 0.1mm)

M9.5x0.5
9.5 3.5 9.5 3.5
Scale: 6.5mm position
(12) 23.5 (12) 23.5
6.5 6.5
18.5 (30) 18.5 (30)

148-342 Mass: 29g 148-343 Mass: 31g 13 9.5

(Operating 20.5
3 range) (58.5)
ø6 -0.008
0
ø6 -0.008
0
SR 8 SR Conventional pitch head
ø3.5

3 3
(spindle pitch: 0.5mm)
ø3.5

While the fine-pitch micrometer head has a measuring range

ø9.3
ø9.3

6 M6x0.5 7.5 of 6.5mm, the conventional head has a larger range of

(8.5) 21.9 (8.5) 21.9 13mm. When replacing a conventional head, the fine-pitch
15 (28.4) 15 (28.4) type can use the common range in the middle of the spindle
148-242 Mass: 10g 148-243 Mass: 10g travel. The standard and compact types of fine-pitch head
are completely interchangeable.
( ): when retracting the spindle until its stroke end.

B-58
 Micrometer Heads
SERIES 148 — Fine Spindle Feeding of 0.25 mm / rev

Technical Data FEATURES

Graduations: 0.01mm
Spindle pitch: 0.25mm • Fine spindle feeding of just 0.25mm/rev for
Spindle face: Spherical of SKS3 (more than HRC60), lapped fine adjustment and positioning.
surface
Scale surface: Hard-chrome plating
Fixture thickness for clamp nut: 6mm

148-132

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face
0 - 13mm 148-132 2µm 9.5mm Plain Spherical (SR4)
0 - 13mm 148-133 2µm 9.5mm w/clamp nut Spherical (SR4)
0 - 6.5mm 148-322 2µm 9.5mm Plain Spherical (SR4)
0 - 6.5mm 148-323 2µm 9.5mm w/ clamp nut Spherical (SR4)

DIMENSIONS AND MASS

Unit: mm

ø9.5 -0.009
0
ø9.5 -0.009
0
ø6.35

SR SR
4 4
ø5

ø15
ø13

9.5 3.5 9.5

(14) 31.5 (12) 23.5

27 (44.5) 18.5 (30)

148-132 30g 148-322 30g

4 4
ø9.5 -0.009
0
ø14
ø14

ø9.5 -0.009
0
ø6.35

SR SR
4 4
ø5

5
ø15
ø13

20

9.5 3.5 9.5

M9.5x0.5 (12) 23.5
(14) 31.5 M9.5x0.5

27 (44.5) 18.5 (30)

148-133 35g 148-323 35g

( ): when retracting the spindle until its stroke end.

B-59
Micrometer Heads
SERIES 148 — Ultra-Small/Small Type

FEATURES Technical Data

Graduations: 0.02mm (148-215, 148-216), 0.01mm or .001"
• Miniature micrometer heads for ease of Spindle pitch: 0.5mm
incorporating into machines. Spindle face: Flat or spherical of SKS3 (more than HRC60),
lapped surface
Scale surface: Hard-chrome plating
Fixture thickness for clamp nut: 3mm (148-216, 148-218),
4mm

148-215 148-201 148-203

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 5mm 148-215 ±5µm 3.5mm Plain Spherical (SR1.5) —
0 - 5mm 148-216 ±5µm 3.5mm w/clamp nut Spherical (SR1.5) —
0 - 6.5mm 148-201 ±5µm 6mm Plain Flat —
0 - 6.5mm 148-203 ±5µm 6mm w/clamp nut Flat —
0 - 6.5mm 148-205 ±5µm 6mm Plain Spherical (SR3) —
0 - 6.5mm 148-207 ±5µm 6mm w/clamp nut Spherical (SR3) —
6.5 - 0 mm 148-209 ±5µm 6mm Plain Flat Reverse reading
6.5 - 0 mm 148-211 ±5µm 6mm w/ clamp nut Flat Reverse reading Shown actual size

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - .2" 148-217 ±5µm .156" Plain Spherical (SR1.5) —
0 - .2" 148-218 ±5µm .156" w/clamp nut Spherical (SR1.5) —
0 -.25" 148-202 ±5µm .25" Plain Flat —
0 -.25" 148-204 ±5µm .25" w/clamp nut Flat —
0 -.25" 148-206 ±5µm .25" Plain Spherical (SR3) —
0 -.25" 148-208 ±5µm .25" w/clamp nut Spherical (SR3) —
.25 - 0" 148-210 ±5µm .25" Plain Flat Reverse reading
.25 - 0" 148-212 ±5µm .25" w/ clamp nut Flat Reverse reading

DIMENSIONS AND MASS

.156”-.0005
0
(Inch Model) 1.8 Unit: mm
SR SR M4.x.5 (Inch Model)
1. ø3.5-0.010
0
(Metric Model) 1. M3.5x0.5 (Metric Model)
5 5
ø2
ø2

ø6
ø6

5 5
(6.5) 20.5 (6.5) 20.5
11.5 (25.5) 11.5 (25.5)

148-215 / 148-217 Mass: 4g 148-216 / 148-218 Mass: 4g

3 .25”-.0005
0
(Inch Model)
.25”-.0005
0
(Inch Model)
ø6 -0.008
0
(Metric Model) ø6 -0.008
0
(Metric Model)
ø3.5

ø3.5

ø9.3
ø9.3

6 7.5
(8.5) 22 M6x0.5 (8.5) 22

15 (28.5) 15 (28.5)

148-201 / 148-202 Mass: 10g 148-203 / 148-204 Mass: 10g

( ): when retracting the spindle until its stroke end.

B-60
 Micrometer Heads
SERIES 148 — Large Thimble Diameter for Easy Reading

FEATURES
• Easy reading due to the large thimble
diameter. (Three types of thimble
diameters can be selected.)
SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Thimble Dia.
0 - 6.5mm 148-301 ±2µm 9.5mm Plain Flat 15mm
148-301 0 - 6.5mm 148-302 ±2µm 9.5mm w/clamp nut Flat 15mm
0 - 6.5mm 148-303 ±2µm 9.5mm Plain Flat 20mm
0 - 6.5mm 148-304 ±2µm 9.5mm w/clamp nut Flat 20mm
0 - 6.5mm 148-305 ±2µm 9.5mm Plain Flat 29mm
0 - 6.5mm 148-306 ±2µm 9.5mm w/clamp nut Flat 29mm
0 - 13mm 148-307 ±2µm 9.5mm Plain Flat 15mm
0 - 13mm 148-308 ±2µm 9.5mm w/clamp nut Flat 15mm
0 - 13mm 148-309 ±2µm 9.5mm Plain Flat 20mm
0 - 13mm 148-310 ±2µm 9.5mm w/clamp nut Flat 20mm
148-303 0 - 13mm 148-311 ±2µm 9.5mm Plain Flat 29mm
0 - 13mm 148-312 ±2µm 9.5mm w/ clamp nut Flat 29mm

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Thimble Dia.
0 - .25" 148-351 ±.0001" .375" Plain Flat .59"
0 - .25" 148-352 ±.0001" .375" w/clamp nut Flat .59"
0 - .25" 148-353 ±.0001" .375" Plain Flat .79"
0 - .25" 148-354 ±.0001" .375" w/clamp nut Flat .79"
0 - .25" 148-355 ±.0001" .375" Plain Flat 1.14"
0 - .25" 148-356 ±.0001" .375" w/clamp nut Flat 1.14"
148-305 0 - .5" 148-357 ±.0001" .375" Plain Flat .59"
0 - .5" 148-358 ±.0001" .375" w/clamp nut Flat .59"
0 - .5" 148-359 ±.0001" .375" Plain Flat .79"
0 - .5" 148-360 ±.0001" .375" w/clamp nut Flat .79"
0 - .5" 148-361 ±.0001" .375" Plain Flat 1.14"
0 - .5" 148-362 ±.0001" .375" w/ clamp nut Flat 1.14"

DIMENSIONS AND MASS

Technical Data
(Metric)

Unit: mm
(Metric)

Graduations: 0.01mm or .001”

.375 (Inch)
ø9.5 -0.009
.375 (Inch)
ø9.5 -0.009

Spindle pitch: 0.5mm or .025”

0

ø12
ø12

ø14

Spindle face: Flat of SKS3 (more than HRC60),

ø6.35
ø6.35

lapped surface
ø15

ø15

Scale surface: Hard-chrome plating

9.5
Fixture thickness for clamp nut: 6mm 4
(12) 23.5
M9.5×0.5 9.5
18.5 (30)
(12) 23.5
148-301 / 148-351 30g 18.5 (30)

148-302 / 148-352 35g

(Metric)
(Metric)

.375 (Inch)
ø9.5 -0.009
.375 (Inch)

0
ø9.5 -0.009
0

ø14
ø6.35

ø6.35
ø20

ø29

M9.5x0.5 4
9.5
9.5
(12) 23.5
(12) 30
18.5 (30)
25 (43)
148-303 / 148-353 45g
148-312 / 148-362 115g
( ): when retracting the spindle until its stroke end.

B-61
Micrometer Heads
SERIES 148 — Common Type in Small Size

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 13mm 148-104 ±2µm 9.5mm Plain Flat —
0 - 13mm 148-103 ±2µm 9.5mm w/clamp nut Flat —
0 - 13mm 148-121 ±2µm 9.5mm Plain* Flat — 148-103
0 - 13mm 148-120 ±2µm 9.5mm w/clamp nut* Flat —
0 - 13mm 148-801 ±2µm 9.5mm Plain Spherical (SR4) —
0 - 13mm 148-802 ±2µm 9.5mm w/clamp nut Spherical (SR4) —
0 - 13mm 148-803 ±2µm 9.5mm Plain* Spherical (SR4) —
0 - 13mm 148-804 ±2µm 9.5mm w/clamp nut* Spherical (SR4) —
13mm - 0 148-821 ±2µm 9.5mm Plain Flat Reverse reading
13mm - 0 148-822 ±2µm 9.5mm w/clamp nut Flat Reverse reading
13mm - 0 148-823 ±2µm 9.5mm Plain* Flat Reverse reading
13mm - 0 148-824 ±2µm 9.5mm w/ clamp nut* Flat Reverse reading 148-104
*with spindle lock

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - .5" 148-112 ±.0001" .375" Plain Flat —
0 - .5" 148-111 ±.0001" .375" w/clamp nut Flat —
0 - .5" 148-123 ±.0001" .375" Plain* Flat —
0 - .5" 148-122 ±.0001" .375" w/clamp nut* Flat — 148-121
0 - .5" 148-811 ±.0001" .375" Plain Spherical (SR4) —
0 - .5" 148-812 ±.0001" .375" w/clamp nut Spherical (SR4) —
0 - .5" 148-813 ±.0001" .375" Plain* Spherical (SR4) —
0 - .5" 148-814 ±.0001" .375" w/clamp nut* Spherical (SR4) —
.5" - 0 148-831 ±.0001" .375" Plain Flat Reverse reading
.5" - 0 148-832 ±.0001" .375" w/clamp nut Flat Reverse reading
.5" - 0 148-833 ±.0001" .375" Plain* Flat Reverse reading
.5" - 0 148-834 ±.0001" .375" w/ clamp nut* Flat Reverse reading
*with spindle lock
148-120

DIMENSIONS AND MASS

.375” (Inch) Unit: mm
4 .375” (Inch)
ø9.5 -0.009 (Metric) ø9.5 -0.009
ø14

0
0
(Metric)

Technical Data
ø13

ø13
ø5

ø5

9.5 3.5 9.5 3.5 Graduations: 0.01mm or .001"

M9.5x0.5 Spindle pitch: 0.5mm
(14) 31.5 (14) 31.5 Spindle face: Flat or spherical of SKS3 (more
27 (44.5) 27 (44.5) than HR60), lapped surface
Scale surface: Hard-chrome plating
148-104 / 148-112 30g 148-103 / 148-111 35g Fixture thickness for clamp nut: 6mm

.375” (Inch) 4 .375” (Inch)

ø9.5 -0.009
0
(Metric) ø9.5 -0.009
0
(Metric)
ø15 ø15
ø14
ø13

ø13
ø5

ø5

9.5 3.5 9.5 3.5

M9.5x0.5
(14) 40.1 (14) 40.1

27 (53.1) 27 (53.1)

148-121 / 148-123 40g 148-120 / 148-122 45g

( ): when retracting the spindle until its stroke end.

B-62
 Micrometer Heads
SERIES 148 — Common Type in Small Size with Zero-Adjustable Thimble

FEATURES
• The thimble can be set to zero at any
position by loosening the set screw.

SPECIFICATIONS
Metric
148-503 Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 13mm 148-503 ±2µm 9.5mm Plain Flat —
0 - 13mm 148-513 ±2µm 9.5mm Plain Flat Stainless steel throughout
0 - 13mm 148-508 ±2µm 9.5mm w/clamp nut Flat —
0 - 13mm 148-506 ±2µm 9.5mm Plain* Flat —
0 - 13mm 148-504 ±2µm 9.5mm w/clamp nut* Flat —
0 - 13mm 148-853 ±2µm 9.5mm Plain Spherical (SR4) —
0 - 13mm 148-854 ±2µm 9.5mm w/clamp nut* Spherical (SR4) —
13mm - 0 148-863 ±2µm 9.5mm Plain Flat Reverse reading
13mm - 0 148-864 ±2µm 9.5mm w/ clamp nut* Flat Reverse reading
*with spindle lock

148-504
Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - .5" 148-501 ±.0001" .375" Plain Flat —
0 - .5" 148-511 ±.0001" .375" Plain Flat Stainless steel throughout
0 - .5" 148-507 ±.0001" .375" w/clamp nut Flat —
0 - .5" 148-505 ±.0001" .375" Plain* Flat —
0 - .5" 148-502 ±.0001" .375" w/clamp nut* Flat —
0 - .5" 148-851 ±.0001" .375" Plain Spherical (SR4) —
Technical Data 0 - .5" 148-852 ±.0001" .375" w/clamp nut* Spherical (SR4) —
Graduations: 0.01mm or .001"
Spindle pitch: 0.5mm .5"- 0 148-861 ±.0001" .375" Plain Flat Reverse reading
Spindle face: Flat or spherical of SKS3 (more .5"- 0 148-862 ±.0001" .375" w/ clamp nut* Flat Reverse reading
than HRC60), lapped surface *with spindle lock
Scale surface: Hard-chrome plating
Fixture thickness for clamp nut: 6mm

DIMENSIONS AND MASS

Unit: mm
.375” (Inch) 4 .375” (Inch)
ø9.5 -0.009
0
(Metric) ø9.5 -0.009
0
(Metric)
ø14

ø13
ø13

ø5
ø5

9.5 9.5
M9.5x0.5
(12) 37 (12) 37
25 (50) 25 (50)

148-503 / 148-501 35g 148-508 / 148-507 40g

.375” (Inch) 4 .375” (Inch)

ø9.5 -0.009
0
(Metric) ø9.5 -0.009
0
(Metric)
ø15 ø15
ø14

ø13
ø13
ø5

ø5

9.5 9.5
M9.5x0.5
(12) 45.6 (12) 45.6

25 (58.6) 25 (58.6)

148-506 / 148-505 35g 148-504 / 148-502 40g

( ): when retracting the spindle until its stroke end.

B-63
Micrometer Heads
SERIES 149 — Common Type in Small Size with Carbide-tipped Spindle

FEATURES
• Carbide-tipped measuring face.

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 15mm 149-132 ±2µm 9.5mm Plain Flat (carbide tip) —
0 - 15mm 149-131 ±2µm 9.5mm w/clamp nut Flat (carbide tip) — 149-132
0 - 15mm 149-183 ±2µm 9.5mm Plain* Flat (carbide tip) With spindle lock
0 - 15mm 149-184 ±2µm 9.5mm w/clamp nut* Flat (carbide tip) With spindle lock
0 - 15mm 149-801 ±2µm 9.5mm Plain Spherical (SR4) —
0 - 15mm 149-802 ±2µm 9.5mm w/clamp nut Spherical (SR4) —
15mm - 0 149-821 ±2µm 9.5mm Plain Flat (carbide tip) Reverse reading
15mm - 0 149-822 ±2µm 9.5mm w/ clamp nut Flat (carbide tip) Reverse reading
*with spindle lock.

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - .5" 149-148 ±.0001" .375" Plain Flat (carbide tip) — 149-184
0 - .5" 149-147 ±.0001" .375" w/clamp nut Flat (carbide tip) —
0 - .5" 149-185 ±.0001" .375" Plain* Flat (carbide tip) With spindle lock
0 - .5" 149-182 ±.0001" .375" w/clamp nut* Flat (carbide tip) With spindle lock
0 - .5" 149-811 ±.0001" .375" Plain Spherical (SR4) —
0 - .5" 149-812 ±.0001" .375" w/clamp nut Spherical (SR4) —
.5" - 0 149-831 ±.0001" .375" Plain Flat (carbide tip) Reverse reading
.5" - 0 149-832 ±.0001" .375" w/ clamp nut Flat (carbide tip) Reverse reading
*with spindle lock.

DIMENSIONS AND MASS

Unit: mm
Technical Data
.375” (Inch)
4
.375” (Inch) Graduations: 0.01mm or .001"
ø9.5 -0.009
0
(Metric) ø9.5 -0.009
0
(Metric) Spindle pitch: 0.5mm
ø14

Spindle face: Flat with carbide tip (more than

HRA90) or spherical, lapped surface
ø6.35

ø6.35
ø15

ø15

Scale surface: Hard-chrome plating

15 Fixture thickness for clamp nut: 6mm
15 3.5 3.5
M9.5x0.5 (149-131, 149-147: 11.5mm)
(17) 43.5 (17) 43.5
32 (58.5) 32 (58.5)

149-132 / 149-148 55g 149-131 / 149-147 60g

.375” (Inch) 4 .375” (Inch)

ø9.5 -0.009
0 (Metric) ø9.5 -0.009
0
(Metric)
ø15 ø15
ø14
ø6.35

ø6.35
ø15

ø15

9.5
3.5 9.5 3.5
(11.5) M9.5x0.5
49 (11.5) 49
26.5 (64) 26.5 (64)

149-183 / 149-185 55g 149-184 / 149-182 60g

( ): when retracting the spindle until its stroke end.

B-64
 Micrometer Heads
SERIES 150 — Common Type in Middle Size
FEATURES
• Ratchet stop for constant force.
• Long spindle type is available for a variety of applications.
• Carbide-tipped measuring face.
SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
150-801
0 - 25mm 150-192 ±2µm 10mm Plain Flat (carbide tip) —
0 - 25mm 150-191 ±2µm 10mm w/clamp nut Flat (carbide tip) —
0 - 25mm 150-209 ±2µm 10mm Plain* Flat (carbide tip) —
0 - 25mm 150-210 ±2µm 10mm w/clamp nut* Flat (carbide tip) —
0 - 25mm 150-801 ±2µm 10mm Plain Spherical (SR4) —
0 - 25mm 150-802 ±2µm 10mm w/clamp nut Spherical (SR4) —
0 - 25mm 150-821 ±2µm 10mm Plain Flat (carbide tip) Reverse reading
0 - 25mm 150-822 ±2µm 10mm w/clamp nut Flat (carbide tip) Reverse reading
0 - 25mm 150-190 ±2µm 10mm Plain Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 150-189 ±2µm 10mm w/clamp nut Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 150-196 ±2µm 10mm Plain* Flat (carbide tip) w/ vernier (.0001mm)
0 - 25mm 150-195 ±2µm 10mm w/clamp nut Flat (carbide tip) w/ vernier (.0001mm)
0 - 25mm 150-211 ±2µm 10mm Plain* Flat (carbide tip) w/o ratchet stop
0 - 25mm 150-212 ±2µm 10mm w/clamp nut* Flat (carbide tip) w/o ratchet stop
0 - 25mm 150-219 ±2µm 10mm Plain Flat Long spindle
0 - 25mm 150-220 ±2µm 10mm w/ clamp nut Flat Long spindle
150-191 *with spindle lock

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 1" 150-208 ±.0001" .375" Plain Flat (carbide tip) —
0 - 1" 150-198 ±.0001" .375" Plain Flat (carbide tip) w/o ratchet stop
0 - 1" 150-207 ±.0001" .375" w/clamp nut Flat (carbide tip) —
0 - 1" 150-197 ±.0001" .375" w/clamp nut Flat (carbide tip) w/o ratchet stop
0 - 1" 150-213 ±.0001" .375" Plain* Flat (carbide tip) —
0 - 1" 150-214 ±.0001" .375" w/clamp nut* Flat (carbide tip) —
Technical Data 0 - 1" 150-811 ±.0001" .375" Plain Spherical (SR4) —
Graduations: 0.01mm, 0.001mm, .001" or .0001"
0 - 1" 150-812 ±.0001" .375" w/clamp nut Spherical (SR4) —
Spindle pitch: 0.5mm
Spindle face: Flat with carbide tip* (more than HRA90) or 0 - 1" 150-831 ±.0001" .375" Plain Flat (carbide tip) Reverse reading
spherical, lapped surface 0 - 1" 150-832 ±.0001" .375" w/clamp nut Flat (carbide tip) Reverse reading
*Long spindle type: SKS3 (more than HRC60)
Scale surface: Hard-chrome plating 0 - 1" 150-206 ±.0001" .375" Plain Flat (carbide tip) w/ vernier (.0001")
Fixture thickness for clamp nut: 11.5mm 0 - 1" 150-205 ±.0001" .375" w/clamp nut Flat (carbide tip) w/ vernier (.0001")
0 - 1" 150-215 ±.0001" .375" Plain* Flat (carbide tip) w/ vernier (.0001")
0 - 1" 150-216 ±.0001" .375" w/clamp nut* Flat (carbide tip) w/ vernier (.0001")
0 - 1" 150-217 ±.0001" .375" Plain* Flat (carbide tip) w/o ratchet stop
0 - 1" 150-218 ±.0001" .375" w/clamp nut* Flat (carbide tip) w/o ratchet stop
0 - 1" 150-221 ±.0001" .375" Plain Flat Long spindle
0 - 1" 150-222 ±.0001" .375" w/ clamp nut Flat Long spindle
*with spindle lock

DIMENSIONS AND MASS

.375” (Inch) 4 .375” (Inch)
ø10 -0.009 (Metric) Unit: mm
ø6.35

ø10 -0.009
0
(Metric) 0
ø14
ø6.35

ø18

ø18

15 17 M9.5x0.5 15 17
(17) 67 (17) 67
42 (92) 42 (92)

150-192 / 150-208 95g 150-191 / 150-207 100g

.375” (Inch) 4 .375” (Inch)

ø10 -0.009
0
(Metric)
ø10 -0.009 (Metric)
ø6.35

0
ø6.35

ø14
ø18

ø20
ø20

ø18

15 17 M9.5x0.5 15 17
(17) 78.5 (17) 78.5
42 (103.5) 42 (103.5)

150-209 / 150-213 110g 150-210 / 150-214 115g

( ): when retracting the spindle until its stroke end.

B-65
Micrometer Heads
SERIES 151 — Common Type in Middle Size with 8mm Diameter Spindle
FEATURES
• 8mm diameter spindle for heavy-duty use.
• Ratchet stop for constant force.
• Carbide-tipped measuring face.

SPECIFICATIONS
Metric
151-223
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 25mm 151-224 ±2µm 12mm Plain Flat (carbide tip) —
0 - 25mm 151-223 ±2µm 12mm w/clamp nut Flat (carbide tip) —
0 - 25mm 151-214 ±2µm 12mm Plain* Flat (carbide tip) — 151-224
0 - 25mm 151-213 ±2µm 12mm w/clamp nut* Flat (carbide tip) —
0 - 25mm 151-222 ±2µm 12mm Plain Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 151-221 ±2µm 12mm w/clamp nut Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 151-212 ±2µm 12mm Plain* Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 151-211 ±2µm 12mm w/clamp nut* Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 151-227 ±2µm 12mm Plain Flat (carbide tip) w/o ratchet stop
0 - 25mm 151-228 ±2µm 12mm w/clamp nut Flat (carbide tip) w/o ratchet stop
0 - 25mm 151-225 ±2µm 12mm Plain* Flat (carbide tip) w/o ratchet stop
0 - 25mm 151-226 ±2µm 12mm w/clamp nut* Flat (carbide tip) w/o ratchet stop
0 - 50mm 151-256 ±4µm 12mm Plain Flat (carbide tip) —
0 - 50mm 151-255 ±4µm 12mm w/clamp nut Flat (carbide tip) —
0 - 50mm 151-260 ±4µm 12mm Plain Flat (carbide tip) w/o ratchet stop
0 - 50mm 151-259 ±4µm 12mm w/ clamp nut Flat (carbide tip) w/o ratchet stop 151-255
*with spindle lock

Inch
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 1" 151-240 ±.0001" .5" Plain Flat (carbide tip) —
0 - 1" 151-239 ±.0001" .5" w/clamp nut Flat (carbide tip) — 151-256
0 - 1" 151-238 ±.0001" .5" Plain Flat (carbide tip) w/ vernier (.0001")
0 - 1" 151-237 ±.0001" .5" w/clamp nut Flat (carbide tip) w/ vernier (.0001")
0 - 1" 151-243** ±.0001" .5" Plain* Flat (carbide tip) w/ vernier (.0001")
0 - 1" 151-244** ±.0001" .5" w/clamp nut* Flat (carbide tip) w/ vernier (.0001")
0 - 1" 151-241 ±.0001" .5" Plain* Flat (carbide tip) w/o ratchet stop
0 - 1" 151-242 ±.0001" .5" w/clamp nut* Flat (carbide tip) w/o ratchet stop Technical Data
0 - 2" 151-272 ±.0002" .5" Plain Flat (carbide tip) — Graduations: 0.01mm, 0.001mm, .001" or .0001"
0 - 2" 151-271 ±.0002" .5" w/clamp nut Flat (carbide tip) — Spindle pitch: 0.5mm
Spindle face: Flat with carbide tip (more than
*with spindle lock **with ratchet stop HRA90), lapped surface
Scale surface: Hard-chrome plating
DIMENSIONS AND MASS Fixture thickness for clamp nut: 25.5mm

Unit: mm
.5” (Inch)
.5” (Inch) .5” (Inch) ø12 -0.011
0
(Metric)
ø12 -0.011
0 (Metric) ø12 -0.011
0 (Metric)
ø22
ø8

ø8

ø8
ø21

ø21

ø21

29 17 29 17 19 3.5
(38) 70 (38) 103 (28.6) 65.9

63 (95) 88 (153) 53.6 (90.9)

151-224 / 151-240 150g 151-256 / 151-272 225g 151-225 / 151-241 160g

.5” (Inch)
.5” (Inch) .5” (Inch) ø12 -0.011
0
(Metric)
4 ø12 -0.011
0
(Metric) 4 ø12 -0.011
0
(Metric) 4
ø22
ø16

ø16

ø16
ø8
ø8

ø8
ø21

ø21
ø21

29 17 29 17
M12x0.5 19 3.5
M12x0.5
M12x0.5 (38) 70 (38) 103
(28.6) 65.9
63 (95) 88 (153) 53.6 (90.9)

151-223 / 151-239 155g 151-255 / 151-271 230g 151-226 / 151-242 165g

( ): when retracting the spindle until its stroke end.

B-66
 Micrometer Heads
SERIES 153 — Non-rotating Spindle Type

FEATURES
• Carbide-tipped measuring face.
• Non-rotating spindle.

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 15mm 153-101 ±3µm 9.5mm Plain Flat (carbide tip) —
153-101
0 - 25mm 153-201* ±3µm 12mm Plain Flat (carbide tip) —
0 - 25mm 153-202* ±3µm 12mm Plain Flat (carbide tip) w/ vernier (0.001mm)
0 - 25mm 153-203 ±3µm 12mm Plain Flat (carbide tip) —
0 - 25mm 153-204 ±3µm 12mm Plain Flat (carbide tip) w/ vernier (0.001mm)
*with ratchet stop

Inch
153-203 Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - .5" 153-108 ±.00015" .375" Plain Flat (carbide tip) —
0 - 1" 153-205* ±.00015" .5" Plain Flat (carbide tip) —
0 - 1" 153-206* ±.00015" .5" Plain Flat (carbide tip) w/ vernier (.0001")
0 - 1" 153-207 ±.00015" .5" Plain Flat (carbide tip) —
0 - 1" 153-208 ±.00015" .5" Plain Flat (carbide tip) w/ vernier (.0001")
*with ratchet stop

DIMENSIONS AND MASS

Technical Data Unit: mm
Graduations: 0.01mm, 0.001mm, .001" or .0001"
(Metric)

Spindle pitch: 0.5mm

.375” (Inch)

Spindle face: Flat with carbide tip (more than

ø9.5 -0.009
ø14.8

HRA90), lapped surface

0
ø6.35

Scale surface: Hard-chrome plating

ø15.3

10
(12) 58.5
27 (73.5)

153-101 / 153-203 70g

(Metric)
.5” (Inch)
ø12 -0.011

Ratchet stop
ø14.8
0
ø8

ø18

10
(12) 87.5
37 (112.5)

153-201 / 153-205 125g

(Metric)
.5” (Inch)
ø12 -0.011
ø14.8
0
ø8

ø18

10
(12) 70.5
37 (95.5)
153-203 / 153-207 125g

( ): when retracting the spindle until its stroke end.

B-67
Micrometer Heads
SERIES 152 — Quick Spindle Feeding of 1mm/rev.
FEATURES
Technical Data
• Quick spindle feeding of 1mm/rev. Graduations: 0.01mm
• Carbide-tipped measuring face. Spindle pitch: 1mm
Spindle face: Flat with carbide tip (more than
HRA90), lapped surface
Scale surface: Hard-chrome plating

152-102
SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 15mm 152-101 ±2µm 12mm Plain Flat (carbide tip) —
0 - 25mm 152-102 ±2µm 12mm Plain Flat (carbide tip) —
0 - 50mm 152-103 ±4µm 12mm Plain Flat (carbide tip) —

DIMENSIONS AND MASS

(Metric)

Unit: mm
.5” (Inch)
ø12 -0.011
0
ø8

ø30

Range A B C Mass (g)

16 0 - 15mm 34 60 75 205
(19) B
A C 0 - 25mm 44 69 94 230
152-101 0 - 50mm 69 94 144 355
( ): when retracting the spindle until its stroke end.

Micrometer Heads
SERIES 152 — Large Thimble Type for Fine Feeding
FEATURES
• The large diameter thimble for fine adjustment and positioning.
• Carbide-tipped measuring face.
SPECIFICATIONS
Metric 152-283
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 10mm 152-283 ±2µm 12mm w/clamp nut Flat (carbide tip) —
0 - 25mm 152-332 ±2µm 12mm Plain Flat (carbide tip) —
0 - 25mm 152-348 ±2µm 12mm Plain Flat (carbide tip) Bidirectional graduation
0 - 50mm 152-380 ±4µm 12mm Plain Flat (carbide tip) Bidirectional graduation Technical Data
Inch Graduations: 0.002mm or .0001"
Spindle pitch: 1mm
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks Spindle face: Flat with carbide tip (more than
0 - 1" 152-372 ±.0001" .5" Plain Flat (carbide tip) Bidirectional graduation HRA90), lapped surface
Scale surface: White anodized aluminum
0 - 2" 152-388 ±.0002" .5" Plain Flat (carbide tip) Bidirectional graduation
Fixture thickness for clamp nut: 22.5mm

DIMENSIONS AND MASS

(Metric)

(Metric)

Unit: mm
.5” (Inch)

.5” (Inch)
ø12 -0.011

ø12 -0.011
0

0
ø6.35
ø16

ø8
ø49

ø49

M12x0.5 4
26 29
(35) 53 (38) 66
45 (63) 63 (91)

152-283 152-332 / 152-348 / 152-372

Mass: 190g Mass: 310g
( ): when retracting the spindle until its stroke end.

B-68
 Micrometer Heads
SERIES 110 — Differential Screw Translator (Extra-Fine Feeding) Type

FEATURES
• Differential movements of spindle threads and units allow fine spindle
feeding (0.05mm/rev*), resulting in high-resolution measurements.
*110-502, 110-504: 0.025mm/rev / .001”/rev (fine feeding)
• Carbide-tipped measuring face.
• Non-rotating spindle.

SPECIFICATIONS
110-102 Metric
Range Order No. Graduation Accuracy* Stem dia. Stem Spindle face
0 - 1mm 110-105 0.001mm ±3 / ±1.5µm 12mm w/clamp nut Flat (carbide tip)
0 - 1mm 110-106 0.0001mm ±3 / ±1.5µm 12mm w/clamp nut Flat (carbide tip)
0 - 1mm 110-107 0.001mm ±3 / ±1.5µm 12mm w/clamp nut Flat (carbide tip)
0 - 1mm 110-108 0.0001mm ±3 / ±1.5µm 12mm w/clamp nut Flat (carbide tip)
0 - 2.5mm 110-101 0.001mm ±3 / ±1.5µm 12mm w/clamp nut Spherical (SR8)
0 - 2.5mm 110-102 0.0001mm ±3 / ±1.5µm 12mm w/clamp nut Spherical (SR8)
110-502 0 - 13mm 110-502* 0.0005mm ±3 / ±1.5µm 9.5mm w/clamp nut Spherical (SR3)
0.01mm
* Narrow range (within 1 rev.): 0.2mm

Inch
Range Order No. Graduation Accuracy* Stem dia. Stem Spindle face
Technical Data 0 - .02" 110-115 .00005" ±.00015" / ±.00006" .5" w/clamp nut Flat (carbide tip)
Graduations: 0.001mm, 0.0005mm, 0.0001mm, .00005" or 0 - .02" 110-116 .000005" ±.00015" / ±.00006" .5" w/clamp nut Flat (carbide tip)
.00002", .000005" 0 - .02" 110-117 .00005" ±.00015" / ±.00006" .5" w/clamp nut Flat (carbide tip)
Spindle pitch: 0.05mm or 0.025mm
Spindle face: Flat with carbide tip (more than 0 - .02" 110-118 .000005" ±.00015" / ±.00006" .5" w/clamp nut Flat (carbide tip)
HRA90) or spherical, lapped surface 0 - .05" 110-111 .00005" ±.0002" / ±.00006" .5" w/clamp nut Spherical (SR8)
Scale surface: Hard-chrome plating 0 - .05" 110-112 .000005" ±.0002" / ±.00006" .5" w/clamp nut Spherical (SR8)
Fixture thickness for clamp nut: 9.5mm (11.5mm*) 0 - .5" 110-504* .00002" ±.00015" / ±.00006" .375" w/clamp nut Spherical (SR3)
*110-502, 110-504
.001"
* Narrow range (within 1 rev.): .006"

DIMENSIONS AND MASS

Unit: mm

.5” (Inch) .5” (Inch)

4 (Metric) 4 (Metric)
ø12 -0.011
0
ø12 -0.011
0
ø16
ø16

ø8
ø8

ø18.6

ø18.6
ø21

ø21

M12x0.5 12.7 M12x0.5 12.7

(35.2) 70 (36.2) 62.5
37.7 (95) 37.7 (72.5)

110-101 / 110-111 110-105 / 110-115

110-102 / 110-112 150g 110-106 / 110-116 150g

.375” (Inch) Fine-feed thimble

ø21

4 ø9.5 -0.009
0
(Metric)
Coarse-feed thimble
ø14

SR
3
ø13
ø5

15
M9.5x0.5
(17) 67.5
30 (80.5) ( ): when retracting the spindle until its stroke end.

110-502 / 110-504 95g

B-69
Micrometer Heads
SERIES 152 — for XY-Stage

FEATURES
152-390, 152-389, 152-391, 152-392
• Non-rotating device is attached to the spindle tip.
• Floating thimble allows easy zero setting at any spindle position.
• Bidirectional graduation for easy reading in both directions.
152-401, 152-402
• Adjustable spindle can be moved with the thimble and
held at any position, allowing easy zero-setting.

SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 25mm 152-390 ±2µm 18mm Plain Flat (hardened) with for X-axis, bidirectional grad. 152-390
0 - 25mm 152-389 ±2µm 18mm Plain non-rotating device for Y-axis, bidirectional grad.
0 - 25mm 152-402* ±2µm 18mm Plain Spherical with carbide for X-axis, with vernier
0 - 25mm 152-401* ±2µm 18mm Plain tip (SR10) for Y-axis, with vernier
*0.001mm reading is obtained with vernier

Inch Technical Data

Range Order No. Accuracy Stem dia. Stem Spindle face Remarks Graduations: 0.005mm, 0.001mm*
*vernier reading
0 - 1" 152-392 ±.0001" .709" Plain Flat (hardened) with for X-axis, Bidirectional grad. Spindle pitch: 1mm
0 - 1" 152-391 ±.0001" .709" Plain non-rotating device for Y-axis, Bidirectional grad. Spindle face: Flat (hardened) or spherical with
carbide tip (more than HRA90), lapped surface
Scale surface: White anodized aluminum

DIMENSIONS AND MASS

Unit: mm
ø18 -0.011
0
ø11

ø8
ø6.35

ø49

1.5 10

ø5.5 7
14
(27.7) 66
52.7 (91)

152-390 / 152-392 270g

ø18 -0.011
0

17
ø8

ø51

ø49
10
SR

2 A
14
(30.7) 84.2
55.7 (109.2)

152-402 460g

( ): when retracting the spindle until its stroke end.

B-70
 Micrometer Heads
SERIES 197 — Non-rotating Spindle and Large Thimble

FEATURES
• Large thimble micrometer head with non-rotating spindle.
• Floating thimble allows easy zero setting at any spindle position.
• Bidirectional graduation for easy reading in both directions.
• Dual-spindle mechanism for quick feeding of 1mm/rev.
• Carbide-tipped measuring face.
SPECIFICATIONS
197-101 Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 50mm 197-101 ±5µm 18mm Plain Flat (carbide tip) Bidirectional graduation

Technical Data Inch

Graduations: 0.005mm or .0002" Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
Spindle pitch: 1mm
Spindle face: Flat with carbide tip (more than HRA90), lapped 0 - 2" 197-201 ±.0002" .709" Plain Flat (carbide tip) Bidirectional graduation
surface
Scale surface: White anodized aluminum DIMENSION AND MASS
Unit: mm

ø18 -0.011
0
ø8

ø49
14

(29) 64 ( ): when retracting

79 (89) the spindle until its stroke end.
197-101 / 197-201 300g

Micrometer Heads
SERIES 153 — Fine Graduation and High Accuracy
FEATURES
• Fine graduation and high-resolution model.
• Large thimble micrometer head with non-rotating spindle.
• Bidirectional graduation for easy reading in both directions.
• Carbide-tipped measuring face.
153-301
SPECIFICATIONS
Metric
Technical Data Range Order No. Accuracy* Stem dia. Stem Spindle face Remarks
Graduations: 0.0005mm or .00001"
Spindle pitch: 0.5mm 0 - 25mm 153-301 ±1 / ±0.5µm 18mm Plain Flat (carbide tip) Bidirectional graduation
Spindle face: Flat with carbide tip (more than HRA90), lapped *Wide range / narrow range
surface
Inch
Scale surface: White anodized aluminum
Range Order No. Accuracy* Stem dia. Stem Spindle face Remarks
0 - 1" 153-302 ±.00004" / ±.00002" .709" Plain Flat (carbide tip) Bidirectional graduation
*Wide range / narrow range

DIMENSIONS AND MASS

Unit: mm
ø18 -0.02
0

120° 120°
ø8

ø38.1

ø85.5

3-M4X0.7
31.8 PCD28
View from A
(35.4) 75
( ): when retracting
60.4 (100) the spindle until its stroke end.
153-301 / 153-302 750g

B-71
Micrometer Heads
SERIES 250 — with Digit Counter

FEATURES
• Digit counter for easy reading of spindle movement.
• Carbide-tipped measuring face.
• Ratchet stop for constant force.
SPECIFICATIONS
Metric
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 25mm 250-301 ±2µm 10mm Plain Flat (carbide tip) —

Inch 250-301
Range Order No. Accuracy Stem dia. Stem Spindle face Remarks
0 - 1" 250-312 ±.0001" .375" Plain Flat (carbide tip) w / vernier (.0001")

DIMENSIONS AND MASS

Unit: mm
Technical Data
ø10 -0.009

26.8
0
ø6.35

Graduations: 0.01mm or .0001"

Spindle pitch: 0.5mm
ø18

9
Spindle face: Flat with carbide tip (more than
0 0 0 0 HRA90), lapped surface
15
Scale surface: Hard-chrome plating
(17) 93.8
42 (118.8)

250-301 / 250-312 Mass: 165g

( ): when retracting the spindle with adjustable handle

Micro Jack
SERIES 7
FEATURES
• Used for accurate leveling of
machines, surface plates and
other precision instruments. Technical Data
Graduations: 0.01mm
• Easy adjustment under heavy load. 7850

SPECIFICATIONS
Metric
Range Order No. Graduation Max. Load Remarks
60 - 75mm 7850 0.01mm 400kg adjustable handle

DIMENSIONS AND MASS

SR1×90° (85) Unit: mm

ø15
15
60

7850 Mass: 400g

ø40
( ): when retracting the spindle with adjustable handle
ø64

B-72
 Precision Lead Screw
Technical Data FEATURES
• Durability: 100,000 cycles are guaranteed (use
condition: 4 kg load; 2 kg for AS-6.5 and BS-6.5) • Mitutoyo manufactures simple and • Mitutoyo also manufactures screws with
• Main applications economical precision lead screws for special specifications, such as 0.25 mm
Precision feed stages
Fine adjustment of optical elements (mirrors, prisms) precise positioning mechanisms and fine- pitch, as well as those with the standard 0.5
Fiber optic centering devices feed mechanisms, in addition to the mm feed pitch and with dimensions and
Various assembly and adjustment jigs conventional micrometer heads. forms that meet customer's requirements.

Drive motor

Pinion

04AZA164

04AZA162
Precision
lead screw
04AZA160 Micrometer Head

Example Application

SPECIFICATIONS
Feed Stem Tip Tail Screw Sleeve
Stroke Feed pitch accuracy
Order No. Model diameter diameter diameter nominal diameter Measuring Mass Others
(mm) (mm) face
(µm) (mm) (mm) (mm) diameter (mm)
04AZA160 AS-6.5 10g
6.5 ±5 0
ø6 -0.008 ø3.5 0
ø3 -0.01 M4.5 x 0.5 ø7
04AZA161 BS-6.5 11g
Hardened • AS type: Flat spindle tip without nut
04AZA162 AS-13 27g
13 0.5 ø9.5 -0.009
0
ø5 0
ø5 -0.012 ø10.5 • BS type: Spherical spindle tip with nut
04AZA163 BS-13 30g
±2 M7.35 x 0.5
04AZA164 AS-25 61g
25 ø10 -0.009
0
ø6.35 0
ø6 -0.015 ø12 Carbide
04AZA165 BS-25 64g

DIMENSIONS
Unit: mm
Type A: Straight type Sleeve (material: free-cutting
steel, black oxide finish)
diameter

Spindle (material: Nominal diameter

Stem

SKS hardening steel) of screw

External diameter
of top tip
Diameter

of bottom

of sleeve
Diameter

tip

L3
L1 L2 L4
L

Type B: Stem with nut

Sleeve (material: free-cutting
Clamp-down nut steel, black oxide finish)
diameter

Spindle (material: Nominal diameter

Stem

External diameter

SKS hardening steel) of screw

of sleeve
of top tip
Diameter

of bottom
Diameter

tip

L3 L5 Order No. L L1 L2 L3 L4 L5
L1 L2 L4 04AZA160 39 15 14.5 9 6 —
L 04AZA161 39 15 14.5 7.5 6 3
04AZA162 57.5 25 21.5 15.5 8 —
04AZA163 57.5 25 21.5 15.5 8 4
04AZA164 98.5 42 39.5 27 10 —
04AZA165 98.5 42 39.5 27 10 4

B-73
Fixtures for Micrometer Heads
and Linear Gages
FEATURES
• The act of fabricating brackets to mount • There are two types of fixtures for
micrometer heads for each particular micrometer heads--with or without Workstage
application can be laborious and costly. clamping nut on the stem.
Mitutoyo offers various types of fixtures
for micrometer heads to meet a range of
applications. These fixtures are made of
nickel-plated cast iron. Micrometer head
Fixture

DIMENSIONS: Fixtures for plain-stem type micrometer heads

Unit: mm
B
K I
B
M K

A
F
A

2-L
J

C
D

2-J
F

H G
C E I H E

Order No. 303560 303569 303579 Order No. 303564 303573 303583
A ø9.5 ø9.5 ø10 A ø9.5 ø9.5 ø10 Note: Supplied with a socket head screw (M3x0.5x12mm)
B 9 14.5 14.5 B 9 14.5 14.5 for the fixtures to be used with a micrometer head without
C 14.5 19.5 19.5 C 30 40 40 clamp nut (plain stem type micrometer head).
D 20 30 30 D 42.5 52.5 52.5
E 23 35 35 E 4 6 6
F 5 7 7 F 15 18 18
G 11 16 16 G 10 15 15
H 8 12 12 H 15 20 20
I 1.5 3.25 3.25 I 4.5 7.25 7.25
J 32.5 42.5 42.5 J ø3.4 ø4.5 ø4.5
K 4.5 7.25 7.25 K M3x0.5 M3x0.5 M3x0.5
L ø3.4 ø4.5 ø4.5
M M3x0.5 M3x0.5 M3x0.5

M C B
K
B E
G
A

2-L
D
J
A
D

H G
F J C 2-I
F E

Order No. 303562 303571 303581 Order No. 303566 303575 303585
A ø9.5 ø9.5 ø10 A ø9.5 ø9.5 ø10
B 9 14.5 14.5 B 9 14.5 14.5
C 15 15 15 C 15 15 15
D 20 22.5 22.5 D 15 20 20
E 40 60 60 E 25 40 40
F 3 5 5 F 8.5 8.5 8.5
G 30 40 40 G 7.5 10 10
H 15 20 20 H 10 20 20
I ø3.4 ø4.5 ø4.5 I 10 15 15
J M3x0.5 M3x0.5 M3x0.5 J 32.5 40 40
K 4.5 7.25 7.25
L ø3.4 ø4.5 ø4.5
M M3x0.5 M3x0.5 M3x0.5

B-74
Fixtures for Micrometer Heads and Linear Gages

DIMENSIONS: Fixtures for micrometer heads with clamp nut

B B Unit: mm

A
A

2-K

F
J

D
D

C
G
2-I
F

H G
C E I H E

Order No. 303559 303568 303578 Order No. 303563 303572 303582
A ø9.5 ø9.5 ø10 A ø9.5 ø9.5 ø10
B 6 11.5 11.5 B 6 11.5 11.5
C 14.5 19.5 19.5 C 30 40 40
D 20 30 30 D 37.5 50 50
E 24 35 35 E 4.5 6.5 6.5
F 5 7 7 F 15 18 18
G 11 16 16 G 10 15 15
H 8 12 12 H 15 20 20
I 0.5 1.75 1.75 I ø3.4 ø4.5 ø4.5
J 27.5 40 40 B
C
K ø3.4 ø4.5C ø4.5
B E 2-K
A

B
C
D
J

C
B 2-K
I

E
A

A
F

H G
D
J

D 2-G F E L
I
A

H G
D 2-G Order No. 303565 303574 303584
F E L
A ø9.5 ø9.5 ø10
Order No. 303561 303570 303580 B 6 11.5 11.5
A ø9.5 ø9.5 ø10 C ø15 ø15 ø15
B 6 11.5 11.5 D 15 20 20
C 40 60 60 E 25 40 40
D 3.5 5.5 5.5 F 8.5 8.5 8.5
E 30 40 40 G 7.5 10 10
F 15 20 20 H 10 20 20
G ø3.4 ø4.5 ø4.5 I 10 15 15
J 27.5 35 35
K ø3.4 ø4.5 ø4.5
L 0.75 1.25 1.25

B-75
Quick Guide to Precision Micrometer Heads
Measuring Instruments
Key Factors in Selection
Key factors in selecting a micrometer head are the measuring range, spindle face, stem, graduations, thimble diameter, etc.

■ Stem ■ Constant-force Device

Plain stem Stem locknut type ● A micrometer head fitted with a constant-force device (ratchet or friction
thimble) is recommended for measurement applications.
● If using a micrometer head as a stop, or where saving space is a priority, a
head without a ratchet is probably the best choice.

● The stem used to mount a micrometer head is classified as a "plain

type" or "clamp nut type" as illustrated above. The stem diameter is
manufactured to a nominal Metric or Imperial size with an h6 tolerance.
● The clamp nut stem allows fast and secure clamping of the micrometer Micrometer head with Micrometer head without constant-
head. The plain stem has the advantage of wider application and slight constant-force device force device (no ratchet)
positional adjustment in the axial direction on final installation, although it
does requires a split-fixture clamping arrangement or adhesive fixing.
● General-purpose mounting fixtures are available as optional accessories.
■ Spindle Lock
● If a micrometer head is used as a stop it is desirable to use a head fitted
with a spindle lock so that the setting will not change even under repeated
shock loading.
■ Measuring Face

Flat face Spherical face Anti-rotation device

● A flat measuring face is often specified where a micrometer head is used in
measurement applications.
● When a micrometer head is used as a feed device, a spherical face can
minimize errors due to misalignment (Figure A). Alternatively, a flat face on
the spindle can bear against a sphere, such as a carbide ball (Figure B). ■ Measuring Range (Stroke)
● A non-rotating spindle type micrometer head or one fitted with an anti- ● When choosing a measuring range for a micrometer head, allow an
rotation device on the spindle (Figure C) can be used if a twisting action on adequate margin in consideration of the expected measurement stroke.
the workpiece must be avoided. Six stroke ranges, 5 to 50mm, are available for standard micrometer heads.
● If a micrometer head is used as a stop then a flat face both on the spindle ● Even if an expected stroke is small, such as 2mm to 3mm, it will be cost
and the face it contacts provides durability. effective to choose a 25mm-stroke model as long as there is enough space
for installation.
Figure A ● If a long stroke of over 50mm is required, the concurrent use of a gauge
Figure C
block can extend the effective measuring range. (Figure D)

Figure D
Figure B Gauge block

Head’s stroke
Obtained stroke
■ Non-Rotating Spindle
● A non-rotating spindle type head does not exert a twisting action on a
workpiece, which may be an important factor in some applications. ● In this guide, the range (or stroke end) of the thimble is indicated by
a dashed line. For stroke ends, consider the thimble as moving to the
position indicated by the line when designing the jig.
■ Spindle Thread Pitch
● The standard type head has 0.5mm pitch.
● 1mm-pitch type: quicker to set than standard type and avoids the ■ Ultra-fine Feed Applications
possibility of a 0.5mm reading error. Excellent load-bearing characteristics
due to larger screw thread. ● Dedicated micrometer heads are available for manipulator applications,
● 0.25mm or 0.1mm-pitch type etc., which require ultra-fine feed or adjustment of spindle.
This type is the best for fine-feed or fine-positioning applications.

B-76