SYSTEM SETUP GUIDE – BC403 Collection 15 Advanced ABAP Debugging and Analysis

System Setup Guide

BC403 Collection 15 Advanced ABAP Debugging and Analysis

<PUBLIC> Introduction
Before starting the lab work in your SAP Live Access training environment you will need to prepare your
environment based on the SAP Live Access General User Guide and this course relevant System Setup
Guide. This document provides all the additional training system setup information that you need to know in
order to successfully use your SAP Live Access training environment for the booked course.

<INTERNAL>
This course- specific document describes all basic, required set-up information which should be available for
instructors. The document is stored within the Service Marketplace under the alias /curr-info
(http://service.sap.com/curr-info). This document is also used for capturing dynamic information that changes
over time (example: existing bugs due to implemented support packages etc.) and that are not included in
the “fixed” XML based Instructor Handbook.

This document is a mandatory read for all instructors. In addition to this document, the instructor should also
consult the following documents:

 Instructor Handbook (this is the instructor version of the manual the course participants will use).
 Logon Information to Access SAP Training System documents provide information on how to
logon to SAP Education Cloud based delivery systems. See #3 below.

1
SYSTEM SETUP GUIDE BC403-COLLECTION 15-ADVANCED ABAP DEBUGGING AND ANALYSIS

CONTENTS
1. LAST UPDATE OF THIS DOCUMENT (“CHANGE HISTORY”).....................................................3
2. GLOBAL TRAINING SYSTEM SUPPORT......................................................................................3
3. SYSTEM LANDSCAPE INFORMATION.......................................................................................... 3
4. LOGON INFORMATION TO ACCESS SAP TRAINING SYSTEMS................................................4
5. USER ID AND PASSWORDS FOR THE COURSE.........................................................................4
6. ADDITIONAL SYSTEM SETUP TASKS (OPTIONAL)....................................................................4
7. KNOWN SYSTEM ISSUES (OPTIONAL)........................................................................................6
8. ADDITIONAL HINTS AND TIPS FOR EXERCISES OF THIS COURSE (OPTIONAL)...................7

2
SYSTEM SETUP GUIDE - BC403 Collection 15 Advanced ABAP Debugging and Analysis

1. LAST UPDATE OF THIS DOCUMENT (“CHANGE HISTORY”)

<PUBLIC> Revision Number /Version

<INTERNAL><INTERNAL>
Date Update Done By Comment
21.04.2016 Peter Walters Version based on Collection 10
1.9.2016 Alice Chang Revise Live Access Info

2. GLOBAL TRAINING SYSTEM SUPPORT

<INTERNAL>
Hotline +49 62277 40030 or
Create an ITdirect ticket in category IMKPS_TRAI:
ITdirect -> Create Ticket -> Incident -> Select Category IMKPS_TRAI ->Next -> Select the Questionnaire:
General or Expert and fill out all necessary information (only possible for SAP Internal like C-, I-, D- User)

3. SYSTEM LANDSCAPE INFORMATION

<PUBLIC>

ZME System
Server zmetdc00.wdf.sap.corp
SID ZME
Instance 50
Role

<INTERNAL>

ZME System
Server zmetdc00.wdf.sap.corp
SID ZME
Instance 50
Role

1x Cloud Windows Terminal Server (WTS)

1x ECC 6.08/ABAP 7.50

Cloud WTS

SAP Logon Sap Logon ECC 6.08/SAP AS

ABAP 7.50
Internet Explorer

Homedrive

3
SYSTEM SETUP GUIDE - BC403 Collection 15 Advanced ABAP Debugging and Analysis

4. LOGON INFORMATION TO ACCESS SAP TRAINING SYSTEMS

<PUBLIC> <please include in the training material in detailed form e.g. with screenshots>

<INTERNAL> the current logon information to access SAP Training systems is available under the
Download section of https://access.sap.com (i.e. SAP Document for Customer On-Site Training).

5. USER ID AND PASSWORDS FOR THE COURSE

<PUBLIC> <only the SAP Live Access exercise users should be mentioned if not listed in the training
handbook e.g>

System User Name/ID Password

System: zme BC403-01 <Welcome1>
Client:800 hardcoded

<INTERNAL> <List all instructor and student User/Password credentials required to deliver this course.>

User Ranges per Class

For each event a user range is allocated.
Following user ranges are currently available:

Range Group Number Usage

A 00 – 30 Trainer/Student logon

The group numbers used in the training material are represented by ## (or exceptionally XX).

Training with existing User IDs in the master system:

System User Name/ID Password

Cloud Logon train-## initial
(all lower case)
ZME Client 800 BC403-00 to BC403-30 Welcome1

6. ADDITIONAL SYSTEM SETUP TASKS (OPTIONAL)

<PUBLIC>

 Transport request

A transport request has been assigned to your user account. To check which transport request you
should use for the exercises, execute transaction SE80 (Object Navigator) and choose Environment -
>Transport Organizer (Requests). Enter your user account and you should be able to see the
transport request assigned to you. The transport request description should display ‘<course code> -
For Participants’, see example screenshot below.

4
SYSTEM SETUP GUIDE - BC403 Collection 15 Advanced ABAP Debugging and Analysis

 <Application Customizing>
n/a

 <Example ABAPs :>

All Repository objects for this course belong to package BC403. The following naming conventions
are used for this course.

Programs:
- ...BC403_<XY>D_... Demonstration
- ...BC403_<XY>S_... Solution
- ...BC403_<XY>T_... Template

<INTERNAL>

 <Application Customizing>
n/a

 <Switching ON/OFF table locking in SAP systems :>

<List here if a course needs table locking switched on/off by running report ZSENQON or
ZSENQOFF via transaction SE38.>

5
SYSTEM SETUP GUIDE - BC403 Collection 15 Advanced ABAP Debugging and Analysis

 <Example ABAPs :>

All Repository objects for this course belong to package BC403. The following naming conventions
are used for this course.

Programs:
- ...BC403_<XY>D_... Demonstration
- ...BC403_<XY>S_... Solution
- ...BC403_<XY>T_... Template

 <Required preparation in the Training system>

CATTs/eCATTS:
No CATTs/eCATTS are needed

Check that the Services are active for the Demo and Template Web Dynpro Applications used
in the course
Go to transaction SICF, and choose Execute on the initial screen
Expand the nodes default_host > sap > bc > webdynpro > sap
Ensure that the following are active:
 BC403_RBD
 BC403_WD_D1
 BC403_WD_T1
 BC403_WEBDYNPRO_D1

Preparation from a Customizing or Application Perspective

For standard trainings, the necessary data has already been generated for your training client. If your
training course takes place at a customer’s site or uses a non-standard training system, use transaction
BC_DATA_GEN to generate the data for the flight model. Select ‘Standard Data Record’, ‘Cancelled
Entries in SBOOK’, and execute the program.

7. KNOWN SYSTEM ISSUES (OPTIONAL)

<PUBLIC>
At the time of building this course, request-based debugging was not working correctly in the cloud
training environment, therefore no exercise or demo has been included.

<INTERNAL>
At the time of building this course, request-based debugging was not working correctly in the cloud
training environment, therefore no exercise or demo has been included. (I believe there may be
some issue with the storage of he terminal ID in the Windows Registry, probably related to
authorizations). If you have access to a suitable system outside of the training cloud, you may be
able to show the functionality.

6
SYSTEM SETUP GUIDE - BC403 Collection 15 Advanced ABAP Debugging and Analysis

8. ADDITIONAL HINTS AND TIPS FOR EXERCISES OF THIS COURSE (OPTIONAL)

<PUBLIC>
You should know the contents explained in the following courses:
o BC400
o BC401
o BC402
o NET310

<INTERNAL>
Remember to check for additional information published after the final release of the course material.
If any information is available, you can find it in the SAP JAM KT&E Instructor Information Page.

You may get questions from participants on how to debug when working in ABAP Development
Tools (ABAP in Eclipse). This topic is not covered in the BC403 course material, but you can
prepare for these questions by studying the BC404 ABAP In Eclipse course material. The Debugger
in Eclipse does not currently offer many of the options shown in the BC403, but of course would be a
tool which you would need to understand and use if you were developing ABAP in this alternative
development environment. Encourage participants who are interesed in this to consider the BC404.

Note that many of the topics in the first few lessons of the course may well be known already to
course participants (particularly if they have attended other ABAP training courses and/or have been
working with ABAP for some time). If this is the case, do not spend too much time on these topics –
they are there for completeness and to provide additional information.
.

7
www.sap.com

© 2016 SAP SE or an SAP affiliate company. All rights reserved.

No part of this publication may be reproduced or transmitted in any form
or for any purpose without the express permission of SAP SE or an SAP
affiliate company.
SAP and other SAP products and services mentioned herein as well as their
respective logos are trademarks or registered trademarks of SAP SE (or an
SAP affiliate company) in Germany and other countries. Please see
http://www.sap.com/corporate-en/legal/copyright/index.epx#trademark for
additional trademark information and notices. Some software products
marketed by SAP SE and its distributors contain proprietary software
components of other software vendors.
National product specifications may vary.
These materials are provided by SAP SE or an SAP affiliate company for
informational purposes only, without representation or warranty of any kind,
and SAP SE or its affiliated companies shall not be liable for errors or
omissions with respect to the materials. The only warranties for SAP SE or
SAP affiliate company products and services are those that are set forth in
the express warranty statements accompanying such products and services,
if any. Nothing herein should be construed as constituting an additional
warranty.
In particular, SAP SE or its affiliated companies have no obligation to pursue
any course of business outlined in this document or any related presentation,
or to develop or release any functionality mentioned therein. This document,
or any related presentation, and SAP SE’s or its affiliated companies’
strategy and possible future developments, products, and/or platform
directions and functionality are all subject to change and may be changed by

SAP SE or its affiliated companies at any time for any reason without notice.
The information in this document is not a commitment, promise, or legal
obligation to deliver any material, code, or functionality. All forward-looking
statements are subject to various risks and uncertainties that could cause
actual results to differ materially from expectations. Readers are cautioned
not to place undue reliance on these forward-looking statements, which
speak only as of their dates, and they should not be relied upon in making
purchasing decisions.