Technical Education and Skills Development Authority

SAMAR NATIONAL SCHOOL OF ARTS AND TRADES

Taft, Eastern Samar

TRAINING PLAN IN
MASONRY NC II

Date: November 4-December 5, 2022

COMMON COMPETENCIES
Unit of Expected
Activities Schedule Method Resources
Competency Output
Prepare Day 6 Modular/
construction Distance *CBLM
materials and learning *gadget with internet
tools connection

 Identify *Identifying tools according to the job *Identified

materials requirements materials
* Identifying materials and accessories
according to the job requirements
 Requisition *Requisites
materials *Preparing material take-off materials
* Requesting materials and tools

 Receive and *Received and

inspect Checking and inspecting materials and tools inspect materials
materials Storing/ stacking of tool and materials

INSTITUTIONAL ASSESSMENT
Prepare
construction *Read, interpret and answer institutional
Written/
materials and competency assessment instrument Day 6 *ICAI Handbook *accomplished
Interview
tools
Unit of Activities Schedule Method Resources Expected
Competency Output
Observe
procedures, Day 6 Modular/ *CBLM
specifications Distance *gadget with internet
and manuals of learning connection
instructions
*Identified and
 Identify and *Identifying manuals and specifications access
access *Accessing information and data specification/
specification/ manuals
manuals

 Interpret *Interpreted
* Interpreting symbols and specifications
manuals manuals
* Accessing information and data
* Applying conversion of units of measurements

 Apply *Applied
information in information in
*Applying information from manuals manual
manual

 Store Manual *Storing and maintaining manuals *Stored Manual

INSTITUTIONAL ASSESSMENT
Observe *Read and answer institutional competency
procedures, assessment instrument
specifications Written/
Day 6 *ICAI Handbook *accomplished
and manuals of Interview
instructions
 Unit of Expected
Activities Schedule Method Resources
Competency Output
Perform
mensurations Day 7 Modular/
and Distance *CBLM *Selected
calculations learning *gadget with internet measuring
*Selecting measuring instruments connection instruments
 Select
measuring
instruments
*Interpreting formulas for volume, areas, *Carried out
 Carry out perimeters of plane and geometric figures measurements
measurement * Handling of measuring instruments and calculations
s and
calculations

INSTITUTIONAL ASSESSMENT

Perform *Read and answer institutional competency

mensurations assessment instrument Written/
Day 7 *ICAI Handbook *accomplished
and Interview
calculations

Unit of Expected
Activities Schedule Method Resources
Competency Output
 Maintain tools
and equipment Day 8 Modular/
Distance *CBLM
 Check *Maintaining tools and equipment learning *gadget with internet * Checked
condition of * Handling of tools and equipment connection condition of tools
tools and * Identifying tools and equipment defects and equipment
equipment
*Performed basic
 Perform basic *Handling of tools and equipment preventive
preventive * Performing preventive maintenance maintenance
maintenance

*d tools and
 Store tools and equipment
equipment *Storing tools and equipment
* Handling of tools and equipment

INSTITUTIONAL ASSESSMENT

Maintain tools *Read and answer institutional competency

and equipment Written/
assessment instrument Day 8 *ICAI Handbook *accomplished
Interview

Prepared by: Reviewed by: Approved by:

SALVADOR O. SEGUROS GEMMA A. TANIŇAS WENIFREDA Q. HOBAYAN, Ph. D.___

Trainer Vocational Instruction Supervisor II Acting, Vocational School Administrator III