Scribd
Upload
103 views1 page

OIDs SNMP Ceragon IP20

Uploaded by

Victor Avalos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
103 views1 page

OIDs SNMP Ceragon IP20

Uploaded by

Victor Avalos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

SERIE IP20 - C-S-E-V

data:text/csv;charset=utf-8 MIB OID MIB Name Type MIB Type MIB Access
1.3.111.2.802.1.1.8.1.7.3.1.4 dot1agCfmMepDbMacAddress Column OCTET STRING
read-only The MAC address of the remote MEP
1.3.111.2.802.1.1.8.1.7.1.1.9 dot1agCfmMepMacAddress Column OCTET STRING
read-only MEP MAC Address
1.3.111.2.802.1.1.13.1.1.9 lldpV2DestAddressTable Table not-accessible
The table that contains the set of MAC addresses used by LLDP for
transmission and reception of LLDPDUs
1.3.111.2.802.1.1.13.1.1.9.1.2 lldpV2DestMacAddress Column OCTET STRING
read-only The MAC address associated with this entry. The octet string
identifies an individual or a group MAC address that is in use by LLDP as a DA
1.3.111.2.802.1.1.13.1.4.1.1.3 lldpV2RemLocalDestMACAddress Column
INTEGER read-only The index value used to identify the destination MAC
address associated with this entry
1.3.111.2.802.1.1.13.1.2.6.1.2 lldpV2StatsTxDestMACAddress Column
INTEGER read-only Identifies the DA MAC address Its value identifies
the row in the lldpV2DestAddressTable where the MAC address can be found
1.3.6.1.4.1.2281.10.8.1.6.1.1.1.5
genEquipProtocolsMstpGeneralAttributesBpduDestinationMAC Column
INTEGER read-write When set to 'customer', BPDU Dest MAC address should
be set to 0x0180-C200-0000. Otherwise, BPDU Dest MAC address should be set to
0x0180-C200-0008
1.3.111.2.802.1.1.8.1.7.1.1.27 dot1agCfmMepTransmitLbmDestMacAddress Column
OCTET STRING read-write The Target MAC Address Field to be transmitted.
Must be Unicast address.
1.2.840.10006.300.43.1.1.1.1.4 dot3adAggActorSystemID Column OCTET STRING
read-only The MAC address value used as a unique identifier for the System
that contains this Aggregator.
1.2.840.10006.300.43.1.1.1.1.2 dot3adAggMACAddress Column OCTET STRING
read-only The Individual MAC address assigned to the Aggregator.
1.2.840.10006.300.43.1.1.1.1.8 dot3adAggPartnerSystemID Column OCTET
STRING read-only The MAC address value consisting of the unique identifier
for the current protocol Partner of this Aggregator.
1.2.840.10006.300.43.1.2.1.1.3 dot3adAggPortActorSystemID Column OCTET
STRING read-only The MAC address value that defines the value of the System
ID for the System that contains this Aggregation Port.
1.2.840.10006.300.43.1.2.1.1.9 dot3adAggPortPartnerOperSystemID Column
OCTET STRING read-only The MAC Address value representing the current
value of the Aggregation Port's protocol Partner's System ID.
1.3.6.1.4.1.2281.10.9.8.4.1.14
genEquipInterfacesCetLogicConfigLoopbackSwapMacAddressAdminColumn
INTEGER (2..3) read-write Swap MAC address for Ethernet port loopback
1.3.6.1.4.1.2281.10.8.1.6.3.1 genEquipProtocols8032DestMacAddress Scalar OCTET
STRING read-write G8032 (Resiliency protocol) destination MAC address

You might also like