JS360 TRACKED EXCAVATOR | SPECIFICATION

MAX OPERATING WEIGHT: 38372kg (84,596lb)

I H
M

F N J

G
L
K

C A

D B

STATIC DIMENSIONS – JS360 LC/NLC MONOBOOM

Dimensions in millimetres (ft-in) LC NLC Dimensions in millimetres (ft-in) LC NLC

A Track length on ground 4021 (13-2) 4021 (13-2) G Counterweight clearance 1214 (3-11) 1214 (3-11)
B Undercarriage overall length 4954 (16-3) 4954 (16-3) H Tail swing radius 3460 (11-4) 3460 (11-4)
C Track gauge 2600 (8-6) 2390 (7-6) I Overall width of superstructure 2990 (9-10) 2990 (9-10)
D Width over tracks (600mm trackshoes) 3200 (10-6) 2990 (9-6) J Height over cab 3202 (10-6) 3202 (10-6)
D Width over tracks (700mm trackshoes) 3300 (10-10) 3090 (10-1) K Ground clearance 530 (1-8) 530 (1-8)
D Width over tracks (800mm trackshoes) 3400 (11-2) 3190 (10-5) L Track height 1024 (3-4) 1024 (3-4)
D Width over tracks (900mm trackshoes) 3500 (11-6) 3290 (10-10) M Tail length 3431 (11-3) 3431 (11-3)
Standard Boom 6.45m (21ft 2in) N Height over grab rail 3220 (10-6) 3220 (10-6)
Dipper lengths 2.21m (7ft 3in) 2.63m (8ft 8in) 3.23m (10ft 8in) 4.03m (13ft 3in) ME Boom 6.1m (20ft)
Dimensions in millimetres (ft-in) Dipper lengths 2.21m (7ft 3in) 2.63m (8ft 8in)
E Transport length 11280 (37-0) 11220 (36-9) 11120 (36-5) 11200 (36-8) Dimensions in millimetres (ft-in)
F Transport height 3590 (11-9) 3660 (12-0) 3430 (11-4) 3850 (12-8) E Transport length 11120 (36-5) 11200 (36-8)
F Transport height 3430 (11-4) 3850 (12-8)
 JS360 TRACKED EXCAVATOR | SPECIFICATION

ENGINE HYDRAULIC SYSTEM

Model Isuzu AH – 6HK1X Tier 3. A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open
Type Water cooled, 4-stroke, 6-cylinder in-line, common rail direct injection, centre control.
turbocharged and intercooled diesel.
Net power (SAE J1349 and 80/1269/EEC) 202kW (271hp) at 2000rpm. Pumps
Gross power 210kW (281hp) at 1900rpm. Main pumps 2 variable displacement axial piston type.
Piston displacement 7.8 litres (475 cu.in.) Maximum flow 2 x 310 L/min (2 x 64 UK GPM).
Bore/stroke 115mm x 125mm Servo pump Gear type.
(4.5in. x 4.9in.) Maximum flow 30 L/min (6.6 UK GPM).
Air filtration Dry element with secondary safety element and in-cab warning indicator.
Starting system 24 volt. Control valve
Batteries 2 x 12 volt. A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined
Alternator 24V, 50 ampere. to boom, dipper and bucket services for greater speed and efficiency.

Relief valve settings

Boom/Arm/Bucket 319 bar (4627lbf/sq.in)
With power boost 348 bar (5047lbf/sq.in)
SWING SYSTEM Swing circuit 284 bar (4120lbf/sq.in)
Travel circuit 343 bar (4974lbf/sq.in)
Swing motor Axial piston type. Pilot control 45 bar (652lbf/sq.in)
Swing brake Hydraulic braking plus automatic spring applied disc type parking brake.
Final drive Planetary reduction. Hydraulic cylinders
Swing speed 9.1 rpm Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper
Swing gear Large diameter, internally toothed fully sealed grease bath lubricated. and bucket rams.

Filtration
The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life.
UNDERCARRIAGE In tank 150 micron, suction strainer.
Main return line 10 micron, paper element.
Carriage options L-Long Carriage and NL-Narrow Long Carriage. Plexus bypass line 1.5 micron, paper element.
Construction Fully welded, ‘X’ frame type with central bellyguarding and sloping sidemembers Pilot line 10 micron, paper element.
with dirt relief holes under top rollers. Hydraulic hammer return 10 micron, reinforced microform element.
Recovery point Front and rear.
Track shoe options 600mm (24in), 700mm (28in), 800mm (32in), 900mm (34in). Cooling
Upper & lower rollers Heat treated, sealed and lubricated. Worldwide cooling is provided via a single faced full return line air blast cooler with anti-block wavy cooling fins.
Track adjustment Grease cylinder type.
Track idler Sealed and lubricated, with spring cushioned recoil.
Track type Sealed and lubricated.
TRACK DRIVE
NL & L
No. of track guides 2 per side Type Fully hydrostatic, three speed with autoshift.
No. of lower rollers 9 per side Travel motors Variable swash axial piston type, fully guarded within undercarriage frame.
No. of upper rollers 2 per side Final drive Planetary reduction, bolt-on sprockets.
No. of track shoes 48 per side Service brake Hydraulic counter balance valve to prevent overspeeding on gradients.
Park brake Disc type, spring applied, automatic hydraulic release.
Gradeability 70% (35 deg) continuous.
Travel speed High – 5.46 km/h (3.4 mph).
Mid – 3.09 km/h (1.9 mph).
Low – 2.5 km/h (1.5 mph).
Tractive effort 293kN (29877kgf, 65869lbf).
 JS360 TRACKED EXCAVATOR | SPECIFICATION

EXCAVATOR END – JS360 LC/NLC MONOBOOM AMS – ADVANCED MANAGEMENT SYSTEM

6.45m Monoboom available along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height and Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximise
tearouts. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. productivity and efficiency.
Fabricated bucket tipping links are provided with a choice of lift points. A (Auto) Up to 100% engine power and 100% flow. Gives variable power and speed depending on
the operator’s input, matching the demand for output and efficiency to the job. Power boost is
automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after
a period of inactivity (between 5 and 30 seconds as set by the operator)
EXCAVATOR END – JS360 LC/NLC ME E (Economy) 80% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output.
P (Precision) 55% engine power. 90% of hydraulic flow for fine control of grading operations.
6.1m monoboom combined with short dipper options gives optimised lift performance maximising bucket capacity. For bulk L (Lifting) 55% engine power. 68% of hydraulic flow with permanent power boost for maximum lifting
digging applications. power and control.
The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while
the three alternative modes give precise matching of application when specific tasks are undertaken.
The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode,
tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the
job being carried out.
The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever
the hammer pedal is depressed.
A maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in
cab display.

CAB CONTROLS
Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted Excavator All servo lever operated to ISO control pattern, independently adjustable to the seat.
to improve in cab conditions. Tracks Individually servo operated by foot pedal or hand lever.
Fully opening front screen is very smooth to operate and as the lower screen is stored in rear of cab. Speed selection via joystick button.
Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen. Auxiliary Via servo operated foot pedal.
Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand Control isolation Via gate lock lever at cab entrance or panel switch.
side of the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available. Engine speed Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable
Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control. auto-idle with adjustable time delay using AMS.
Optional climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Optional radio with Engine stop Ignition key operated and separate shut-down button.
digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower Horn Operated via servo lever mounted button.
console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground
level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects
operator from suns’ glare through front or top screens.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

SERVICE CAPACITIES WEIGHTS AND GROUND BEARING PRESSURES

Litres UK gal Figures include 1.8cu.m. (2.35cu.yd.) bucket, operator, full fuel tank, and 3.23m (10ft 7in) dipper.
Fuel tank 567 147.4
600mm shoes 700mm shoes 800mm shoes 900mm shoes
Engine coolant 38.0 8.4
JS360NLC Monoboom
Engine oil 38.0 8.4
Machine weight kg (lb) 36522 (80517) 36967 (81498) 37412 (82479) 37857 (83460)
Swing reduction gear 14.5 3.19
Ground bearing pressure kg/cm² (lb/in²) 0.71 (10.1) 0.62 (8.8) 0.54 (7.75) 0.48 (7.0)
track reduction gear (each side) 8.5 1.87
JS360LC Monoboom
Hydraulic system 370 81.5
Machine weight kg (lb) 36681 (80867) 37126 (81848) 37571 (82829) 38016 (83810)
Hydraulic tank 183 40.2
Ground bearing pressure kg/cm² (lb/in²) 0.71 (10.1) 0.62 (8.8) 0.55 (7.78) 0.49 (7.0)

STANDARD EXCAVATING BUCKETS STANDARD / OPTIONAL EQUIPMENT

Standard excavating buckets are fully welded, heavy duty steel with hardened and sealed pivot pins. Standard Equipment: Engine fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Electric refuelling
pump; Heavy-duty alternator; Electrics isolator; Heavy-duty batteries; Cab & engine soundproofing; Cab heater & screen demister;
Mono Boom length: 6.45m (21ft 2in) Tinted glass; Interior light; Coat hook; Cigarette lighter; Ashtray; Climate control; Operator’s storage shelf; Removable floormat;
Windscreen wash/wipe; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic
Bucket width mm 900 1000 1200 1350 1500 1600 1800 1750 1750
cushion control; Boom/swing priority switch; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting
in 35 39 47 53 59 63 71 70 70 brackets; Work lights – boom & mainframe mounted; Undercarriage belly guarding; Upper structure under covers; Swing system
Bucket capacity m3 0.85 0.98 1.245 1.45 1.49 1.61 1.845 2.2 2.34 cover; Twin track guides; External mirrors; Handrail & non-slip walk ways; Quick connect engine oil drain pipe; Front screen blind;
yd3 1.11 1.28 1.63 1.9 1.95 2.1 2.41 2.88 3.06 Quick connect fuel tank drain pipe; Hinged engine under cover.
Bucket weight kg 921 974 1107 1228 1252 1304 1420 1790 1850 Optional Equipment: Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose
lb 2030 2147 2441 2707 2760 2875 3131 3946 4079 buckets; Ditch/grading buckets; Quickhitch buckets; Hydraulic hammers; Auxiliary pipework (full and low flow); Cab mounted
Dipper length & rear work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support
adjustment; lower screen wiper; Radio; Cab protection guarding (FOPS level II), full length track guides.
2.21m (7ft 3in) m m m m m m m l l
2.63m (8ft 8in) m m m m m m m l n
3.23m (10ft 7in) m m m m m m l n n STANDARD EQUIPMENT FOR XTRA DUTY BUILDS
4.03m (13ft 3in) m m m m m l n 5 5
ME Boom length: 6.1m (20ft 0in) Cab cage (FOPS level II); Visibowl pre-cleaner; Reinforced dipper; Reinforced bucket links; Impact buffer around upper structure;
Heavy-duty 10mm underguards and trackmotor covers; Reinforced front light protection.
Bucket width mm 1800 1750 1750
in 71 70 70
Bucket capacity m3 1.845 2.2 2.34
yd3 2.41 2.88 3.06
Bucket weight kg 1420 1790 1850
lb 3131 3946 4079
Dipper length
2.21m (7ft 3in) m l l
2.63m (8ft 8in) m n n

m Material weight up to 1800kg/m3 (1.35t/yd3)

l Material weight up to 1500kg/m3 (1.1t/yd3)
n Material weight up to 1200kg/m3 (0.90t/yd3)
5 Not recommended
These recommendations are given as a guide based on typical operating conditions.
Please contact your distributor for the correct selection of buckets and attachments to suit the application.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

WORKING RANGE – JS360 LC/NLC MONOBOOM

Standard Boom – Boom length: 6.45m (21ft 2in)

A
Dipper length 2.21m (7ft 3in) 2.63m (8ft 8in)
A Maximum digging reach mm (ft-in) 10060 (33-0) 10460 (34-4) B
B Maximum reach on ground mm (ft-in) 9850 (32-4) 10255 (33-8)
C Maximum digging depth mm (ft-in) 6250 (20-6) 6680 (21-11) G
11
D Maximum digging height mm (ft-in) 9510 (31-3) 9730 (31-11) 36

35
E Maximum dumping height mm (ft-in) 6800 (22-4) 7000 (23-0) 10
32
F Maximum vertical cut depth mm (ft-in) 2390 (7-10) 2910 (9-6)
9 30
G Minimum swing radius mm (ft-in) 4740 (15-7) 4710 (15-6)
28
Bucket rotation 185° 185° 8 26
Dipper tearout with boost kgf (lbf) 24940 (54983) 21770 (47995) 24
7
Bucket tearout with boost kgf (lbf) 27350 (60296) 27350 (60296) 22

6 20

Standard Boom – Boom length: 6.45m (21ft 2in) 18

D 5
Dipper length 3.23m (10ft 7in) 4.03m (13ft 3in) 16

A Maximum digging reach mm (ft-in) 11020 (36-0) 11760 (38-6) 4

14
E 12
B Maximum reach on ground mm (ft-in) 10820 (35-6) 11570 (38-0)
3 10
C Maximum digging depth mm (ft-in) 7270 (23-10) 8070 (26-6)
8
D Maximum digging height mm (ft-in) 10020 (32-11) 10220 (33-6) 2
6
E Maximum dumping height mm (ft-in) 7260 (23-10) 7570 (24-10)
4
1
F Maximum vertical cut depth mm (ft-in) 3580 (11-9) 4390 (14-4) 2
G Minimum swing radius mm (ft-in) 4570 (14-5) 4620 (15-2) 0 0

Bucket rotation 185° 185° 2

1
Dipper tearout with boost kgf (lbf) 18060 (39815) 15500 (34171) 4

Bucket tearout with boost kgf (lbf) 27350 (60296) 27350 (60296) F 2
6

3 10
ME Boom – Boom length: 6.10m (20ft 0in)
C 12
Dipper length 2.21m (7ft 3in) 2.63m (8ft 8in) 4
14
A Maximum digging reach 9782mm (32ft 1in) 10190mm (33ft 5in)
5 16
B Maximum reach on ground 9566mm (31ft 5in) 9984mm (32ft 9in)
18
C Maximum digging depth 5960mm (19ft 7in) 6387mm (20ft 11in) 6 20
D Maximum digging height 9450mm (31ft 0in) 9722mm (31ft 11in) 22
7
E Maximum dumping height 6662mm (21ft 10in) 6898mm (22ft 8in) 24

F Maximum vertical cut depth 3097mm (10ft 2in) 3690mm (12ft 1in) 8 26

G Minimum swing radius 4350mm (14ft 3in) 4347mm (14ft 3in) 25

9
Bucket rotation 184.5° 184.5° 12 11 10 9 8 7 6 5 4 3 2 1 0 Metres Metres Feet

Dipper tearout with boost kgf (lbf) 20284 (44719) 17765 (39165) 30 28 26 24 22 20 18 16 14 12 10 16 14 12 10 8 6 4 2 0 Feet

Bucket tearout with boost kgf (lbf) 19500 (43000) 19500 (43000)
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 2.21m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 LC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 9990* 9990* 9920* 9240 6498
6m (19.8ft) 10380* 10340 9540* 7210 9530* 7170 7523
4.5m (14.9ft) 15020* 15020* 11460* 9840 9810* 7040 9380 6170 8146
3m (9.10ft) 12710* 9280 10350* 6780 8690 5680 8457
1.5m (4.11ft) 13580* 8850 10170 6550 8490 5520 8492
0m 18080* 13050 13740* 8630 10020 6410 8760 5660 8253
– 1.5m (– 4.11ft) 16750* 13130 13080* 8610 10020 6410 9650 6200 7715
– 3m (– 9.10ft) 17020* 17020* 14420* 13370 11310* 8770 9510 7450 6806
– 4.5m (– 14.9ft) 10100* 10100* 8330* 8330* 5334
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 2.63m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 LC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 9170* 8240 7006
6m (19.8ft) 9810* 9810* 9000* 7300 8910* 6570 7965
4.5m (14.9ft) 14080* 14080* 10960* 9950 9420* 7090 8700 5730 8555
3m (9.10ft) 17070* 14020 12300* 9370 10050* 6800 8100 5290 8852
1.5m (4.11ft) 13340* 8890 10170 6540 7920 5150 8884
0m 18460* 13000 13710* 8620 9980 6370 8140 5260 8657
– 1.5m (– 4.11ft) 14240* 14240* 17380* 13020 13300* 8540 9930 6320 8860 5690 8146
– 3m (– 9.10ft) 19260* 19260* 15330* 13210 11900* 8650 9200* 6690 7292
– 4.5m (– 14.9ft) 11640* 11640* 8530* 8530* 5945
– 6m (– 19.8ft)

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 3.23m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 LC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 7870* 7480 6630* 6630 7704
6m (19.8ft) 8290* 7400 6410* 5850 8584
4.5m (14.9ft) 10170* 10120 8840* 7150 7610* 5300 6430* 5160 9134
3m (9.10ft) 15790* 14430 11620* 9500 9570* 6840 7910 5160 6660* 4800 9412
1.5m (4.11ft) 17960* 13410 12860* 8950 10180 6540 7740 5010 7120* 4660 9443
0m 18540* 12960 13520* 8600 9940 6320 7620 4900 7360 4740 9229
– 1.5m (– 4.11ft) 14080* 14080* 17940* 12860 13440* 8450 9820 6220 7900 5070 8753
– 3m (– 9.10ft) 21920* 21920* 16340* 12980 12480* 8480 9590* 6260 8680* 5810 7965
– 4.5m (– 14.9ft) 17390* 17390* 13390* 13310 10140* 8710 8430* 7450 6757
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 4.03m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 LC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
9m (29.6ft) 5570* 5570* 7419
7.5m (24.7ft) 5160* 5160* 8601
6m (19.8ft) 7350* 7350* 6770* 5470 5010* 5010* 9396
4.5m (14.9ft) 7980* 7240 7380* 5340 5020* 4490 9900
3m (9.10ft) 13900* 13900* 10540* 9660 8810* 6880 7790* 5150 5170* 4190 10157
1.5m (4.11ft) 16630* 13630 12000* 9000 9630* 6520 7690 4950 5490* 4070 10185
0m 8770* 8770* 18020* 12880 12990* 8530 9860 6230 7510 4780 5990* 4100 9988
– 1.5m (– 4.11ft) 8670* 8670* 13160* 13160* 18120* 12580 13310* 8260 9660 6050 7410 4690 6830 4330 9549
– 3m (– 9.10ft) 13590* 13590* 18910* 18910* 17150* 12570 12850* 8200 9610 6010 7640 4840 8835
– 4.5m (– 14.9ft) 19430* 19430* 20660* 20660* 15010* 12790 11370* 8320 8490* 6150 7930* 5890 7766
– 6m (– 19.8ft) 14590* 14590* 10990* 10990* 7800* 7800* 7420* 7420* 6156

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 2.21m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 9990* 9740 9920* 8490 6498
6m (19.8ft) 10380* 9500 9540* 6620 9530* 6590 7523
4.5m (14.9ft) 15020* 13630 11460* 9000 9810* 6460 9360 5660 8146
3m (9.10ft) 12710* 8450 10350* 6200 8660 5190 8457
1.5m (4.11ft) 13580* 8030 10140 5970 8470 5030 8492
0m 18080* 11720 13740* 7820 9990 5830 8740 5160 8253
– 1.5m (– 4.11ft) 16750* 11790 13080* 7800 10000 5840 9620 5640 7715
– 3m (– 9.10ft) 17020* 17020* 14420* 12020 11310* 7960 9510* 6790 6806
– 4.5m (– 14.9ft) 10100* 10100* 8330* 8330* 5334
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 2.63m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 9170* 7580 7006
6m (19.8ft) 9810* 9610 9000* 6700 8910* 6040 7965
4.5m (14.9ft) 14080* 13690 10960* 9110 9420* 6500 8680 5240 8555
3m (9.10ft) 17070* 12650 12300* 8540 10050* 6220 8080 4840 8852
1.5m (4.11ft) 13340* 8080 10150 5960 7900 4690 8884
0m 18460* 11670 13710* 7810 9960 5790 8120 4790 8657
– 1.5m (– 4.11ft) 14240* 14240* 17380* 11690 13300* 7740 9900 5750 8840 5180 8146
– 3m (– 9.10ft) 19260* 19260* 15330* 11870 11900* 7840 9200* 6090 7292
– 4.5m (– 14.9ft) 11640* 11640* 8530* 8310 5945
– 6m (– 19.8ft)

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 3.23m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 7870* 6880 6630* 6540 7704
6m (19.8ft) 8290* 6810 6410* 5370 8584
4.5m (14.9ft) 10170* 9270 8840* 6560 7610* 4850 6430* 4720 9134
3m (9.10ft) 15790* 13050 11620* 8660 9570* 6250 7880 4710 6660* 4380 9412
1.5m (4.11ft) 17960* 12060 12860* 8130 10160 5960 7720 4570 7120* 4240 9443
0m 18540* 11620 13520* 7790 9910 5740 7600 4460 7340 4310 9229
– 1.5m (– 4.11ft) 14080* 14080* 17940* 11530 13440* 7640 9800 5640 7880 4610 8753
– 3m (– 9.10ft) 21920* 21920* 16340* 11640 12480* 7670 9590* 5680 8680* 5280 7965
– 4.5m (– 14.9ft) 17390* 17390* 13390* 11960 10140* 7900 8430* 6780 6757
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 4.03m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
9m (29.6ft) 5570* 5570* 7419
7.5m (24.7ft) 5160* 5160* 8601
6m (19.8ft) 7350* 6930 6770* 5010 5010* 4610 9396
4.5m (14.9ft) 7980* 6650 7380* 4890 5020* 4100 9900
3m (9.10ft) 13900* 13530 10540* 8820 8810* 6290 7790* 4700 5170* 3810 10157
1.5m (4.11ft) 16630* 12270 12000* 8180 9630* 5930 7670 4500 5490* 3690 10185
0m 8770* 8770* 18020* 11540 12990* 7710 9830 5650 7490 4340 5990* 3720 9988
– 1.5m (– 4.11ft) 8670* 8670* 13160* 13160* 18120* 11250 13310* 7450 9630 5470 7390 4250 6810 3920 9549
– 3m (– 9.10ft) 13590* 13590* 18910* 18910* 17150* 11240 12850* 7390 9590 5430 7620 4390 8835
– 4.5m (– 14.9ft) 19430* 19430* 20660* 20660* 15010* 11460 11370* 7510 8490* 5570 7930* 5340 7766
– 6m (– 19.8ft) 14590* 14590* 10990* 10990* 7800* 7800* 7420* 7420* 6156

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 2.21m, Boom: 6.1m, Trackshoes: 600mm triple grouser. JS360 LC ME
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 10720* 10540 10730* 10310 6075
6m (19.8ft) 10770* 10430 10200* 7800 7163
4.5m (14.9ft) 14930* 14930* 11720* 9990 10200* 7110 10030*
3m (9.10ft) 12910* 9470 10540 6890
1.5m (4.11ft) 13780* 9050 10310 6670
0m 18550* 13300* 13930 8830 10170 6550
– 1.5m (– 4.11ft) 18720* 18720* 17070* 13360 13140* 8800
– 3m (– 9.10ft) 17380* 17380* 14300* 13610 10850* 9000
– 4.5m (– 14.9ft)
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 2.63m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 LC ME
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 9170* 7580 7006
6m (19.8ft) 9810* 9610 9000* 6700 8910* 6040 7965
4.5m (14.9ft) 14080* 13690 10960* 9110 9420* 6500 8680 5240 8555
3m (9.10ft) 17070* 12650 12300* 8540 10050* 6220 8080 4840 8852
1.5m (4.11ft) 13340* 8080 10150 5960 7900 4690 8884
0m 18460* 11670 13710* 7810 9960 5790 8120 4790 8657
– 1.5m (– 4.11ft) 14240* 14240* 17380* 11690 13300* 7740 9900 5750 8840 5180 8146
– 3m (– 9.10ft) 19260* 19260* 15330* 11870 11900* 7840 9200* 6090 7292
– 4.5m (– 14.9ft) 11640* 11640* 8530* 8310 5945
– 6m (– 19.8ft)

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

LIFT CAPACITIES – Dipper length: 3.23m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
7.5m (24.7ft) 7870* 6880 6630* 6540 7704
6m (19.8ft) 8290* 6810 6410* 5370 8584
4.5m (14.9ft) 10170* 9270 8840* 6560 7610* 4850 6430* 4720 9134
3m (9.10ft) 15790* 13050 11620* 8660 9570* 6250 7880 4710 6660* 4380 9412
1.5m (4.11ft) 17960* 12060 12860* 8130 10160 5960 7720 4570 7120* 4240 9443
0m 18540* 11620 13520* 7790 9910 5740 7600 4460 7340 4310 9229
– 1.5m (– 4.11ft) 14080* 14080* 17940* 11530 13440* 7640 9800 5640 7880 4610 8753
– 3m (– 9.10ft) 21920* 21920* 16340* 11640 12480* 7670 9590* 5680 8680* 5280 7965
– 4.5m (– 14.9ft) 17390* 17390* 13390* 11960 10140* 7900 8430* 6780 6757
– 6m (– 19.8ft)

LIFT CAPACITIES – Dipper length: 4.03m, Boom: 6.45m, Trackshoes: 600mm triple grouser. JS360 NLC MONO
Reach from Swing Centre
Load Point 1.5m (4ft 11in) 3m (9ft 10in) 4.5m (14ft 9in) 6m (19ft 8in) 7.5m (24ft 7in) 9m (29ft 6in) Max. Reach

Ht. kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm
9m (29.6ft) 5570* 5570* 7419
7.5m (24.7ft) 5160* 5160* 8601
6m (19.8ft) 7350* 6930 6770* 5010 5010* 4610 9396
4.5m (14.9ft) 7980* 6650 7380* 4890 5020* 4100 9900
3m (9.10ft) 13900* 13530 10540* 8820 8810* 6290 7790* 4700 5170* 3810 10157
1.5m (4.11ft) 16630* 12270 12000* 8180 9630* 5930 7670 4500 5490* 3690 10185
0m 8770* 8770* 18020* 11540 12990* 7710 9830 5650 7490 4340 5990* 3720 9988
– 1.5m (– 4.11ft) 8670* 8670* 13160* 13160* 18120* 11250 13310* 7450 9630 5470 7390 4250 6810 3920 9549
– 3m (– 9.10ft) 13590* 13590* 18910* 18910* 17150* 11240 12850* 7390 9590 5430 7620 4390 8835
– 4.5m (– 14.9ft) 19430* 19430* 20660* 20660* 15010* 11460 11370* 7510 8490* 5570 7930* 5340 7766
– 6m (– 19.8ft) 14590* 14590* 10990* 10990* 7800* 7800* 7420* 7420* 6156

Lift capacity front and rear. Notes: 1. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity Standards.
2. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
Lift capacity full circle. 3. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
 JS360 TRACKED EXCAVATOR | SPECIFICATION

A GLOBAL COMMITMENT TO QUALITY

JCB’s total commitment to its products and customers has helped it grow from a one-man
business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators,
wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts,
industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment.

By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in the world.

By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.

And with a global sales and service network of more than 650 dealers and agents, we aim to deliver
the best customer support in the industry.

Through setting the standards by which others are judged, JCB has become one of the world’s
most impressive success stories.

JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5395 05/12 Issue 3