ExSite Enhanced Thermal 2 Series Fixed

VGA QVGA

Uncover hidden threats in any conditions

Hazardous facilities need reliable video security solutions that meet their unique constraints, comply
with strict requirements, and survive harsh environmental conditions.
The ExSite Enhanced Thermal 2 Series Fixed is encased in heavy-duty stainless steel, offering
hazardous sites a durable security camera with global explosion-proof certifications. Ideal for
monitoring targeted areas such as access points and fences, this camera offers precise thermal views
to accurately detect a target in most environmental conditions, including fog, darkness and foliage.

Features
Thermal Detection Radiometrics
Detect and identify people from a long distance via Receive real-time temperature data with radiometric
their heat signature, even in low visibility, such as capabilities* and reduce potential hazards by
total darkness, fog, smoke or dense foliage. detecting overheating equipment early on.

Explosion-Proof Ready For Harsh Conditions

The heavy-duty housing meets stringent explosion- Safe within a wide temperature range, from -50°C to
proof and dust-ignition-proof requirements while +60°C (-58°F to 140°F), plus Type 4X/6P and
complying with international standards (UL, CSA, IP66/67/68/69 weather rating for maximum durability
ATEX, IECEx, UKCA. Pending INMETRO and in tough environments.
KCs).

Trusted And Secure Expect More From Your Camera

Meet high data security standards with built-in Unlock your camera’s full potential by enabling
cybersecurity features that safeguard your security Elevate, Pelco’s built-in direct camera-to-cloud
system. technology that enhances performance and detection
accuracy.

Smart Analytics ONVIF® Conformant

Stay a step ahead of critical events with built-in ONVIF Profile S, G, T and M conformance for easy
analytics providing enhanced object detection and integration with leading video management software
classification. to maximize your existing investment.

*Select models only. ONVIF is a trademark of Onvif, Inc.

Preliminary Specifications - Subject to Change

Specifications
Image Performance QVGA VGA
Image Sensor 320 x 256 Uncooled VOx Microbolometer 640 x 512 Uncooled VOx Microbolometer
Pixel Pitch 12μm
Spectral Range 8μm to 14μm
Aspect Ratio 5:4
Imaging Rate Up to 30 fps (-1 models up to 8.6 fps)
Dynamic Range -40°C to 225°C (-40°F to 437°F) [may vary based on operating temperature]
Resolution Scaling 320 x 256, can be scaled up to 640 x 512 640 x 512, can be scaled down to 320 x 256
3D Noise Reduction Filter Yes
Sensitivity NETD ≤50 mK (NETD ≤40 mK on 30 fps models when Frame Averager feature is enabled)
Thermal Palettes White Hot, Black Hot, Rainbow, RainHC, IronBow, Lava, Artic, GlowBow, GradedFire, Hottest
Image Uniformity Optimization Automatic Flat Field Correction (FFC) - Thermal and Temporal

Image Control
Image Compression Method H.264, H.265, Motion JPEG, Pelco Smart Compression
Streaming Multi-stream H.264, Multi-stream H.265, Motion JPEG
Bandwidth Management Pelco Smart Compression technology; Idle scene mode
Motion Detection Pixel and Classified Objects
Tamper Detection Yes
Privacy Zones Up to 64 Zones
Audio Compression Method Opus, G.711 PCM 8 kHz
Electronic Image Stabilization Yes

Network
Network 100BASE-TX
Cabling Type CAT5
Connector RJ-45
ONVIF ONVIF® compliant with Profile S, Profile T, Profile G, and Profile M
Password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x
Security port based authentication, FIPS 140-2 L1 (with optional camera license), onboard FIPS 140-2 L3 certified TPM,
Secure Boot, Signed and encrypted firmware
IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv3, ICMP, DHCP,
Protocols
Zeroconf, QoS, DSCP
RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP,
Streaming Protocols
SRTP
Device Management Protocols SNMP v2c, SNMP v3

Mechanical
Dimensions (ØxL) Ø155.5 mm x 269.0 mm; Ø6.12" x 10.4" (dimensions without sunshield)
Weight 6,6 Kg (14,5 lbs)
Construction AISI 316L stainless steel
Finish Electro-polished surface
Cable Entry One 3/4" NPT

[email protected] | pelco.com Preliminary Specifications - Subject to Change 2

Electrical
Power Consumption 10W
VDC: 12V +/- 10%, 9W min. VAC: 24V +/- 10%, 15VA min.
Power Source
PoE: IEEE802.3af Class 3 compliant
Audio Input/Output Line level I/O
External I/O Terminals Alarm In, Alarm Out
Local Storage SD card support (Class V10 or better recommended)

Environmental
Operating Temperature -50 °C to +65 °C (-58 °F to 149 °F)
Storage Temperature -40 °C to +55 °C (-40 °F to 131 °F)
Humidity 10% - 95% non-condensing

Certifications
Certifications/Directives cULus, CE, UKCA, ROHS, RCM, (KC, BIS pending)
Safety UL/CSA 62368-1, EN/IEC 62368-1, IS 13252 (PART 1): 2010/IEC 60950-1: 2005
Hazardous ATEX (EN IEC 60079-0, EN 60079-1, EN 60079-31)
IECEx (IEC 60079-0, IEC 60079-1, IEC 60079-31)
UKEx (EN IEC 60079-0, EN60079-1, EN 60079-31),
ETL listed for USA (UL60079-0, UL60079-1,UL60079-31)
ETL listed for Canada (CAN/CSA-C22.2 NO. 60079-0, CAN/CSA-C22.2NO.60079-1, CAN/CSA-
C22.2NO.60079-31)
Environmental and Performance EN/IEC 60529: IP66, IP67, IP68, IP69
EN 60068-2-52: salt spray
UL50E: 4X, 6P
MIL-STD-167-1A , MIL-STD 810H for N/A
Electromagnetic Emissions FCC Part 15 Subpart B Class A, IC ICES-003 Class A, EN 55032 Class A, EN 61000-6-3
Electromagnetic Immunity EN 50130-4
Vibration Test EN 50130-5, EN 60068-2-6

Lloyd's Register Marine Type Approval Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) Electromagnetic compatibility: EN60945
certification Environmental: IEC 60068-2-78
Warranty 3-year limited warranty. 5-year extended warranty is available.

Explosion-Proof Certifications
Cameras with Cable Tail for Installation with Conduit
Ambient Cable Entry
Part Number Certification Marking
Temperature Temperature
EXRE2-VF09-E0A00-1 ATEX Ex II 2 G Ex db IIC T6...T5 Gb -60°C ≤ Ta ≤ +80°C
EXTE2-VF36-E0A00-1 Ex II 2D Ex tb IIIC T85°C...T100°C Db +55°C or +65°C
EXTE2-QF06-E0A00-1
EXTE2-QF18-E0A00-1 IECEx Ex db IIC T6...T5 Gb
EXRE2-VF09-E0A00 Ex tb IIIC T85°C...T100°C Db
EXTE2-VF36-E0A00
UKEX Ex II 2 G Ex db IIC T6...T5 Gb
EXTE2-QF06-E0A00
Ex II 2D Ex tb IIIC T85°C...T100°C Db
EXTE2-QF18-E0A00
ETLlisted for Class I Zone 1 AEx db IIC T6...T5 Gb
USA Zone 21 AEx tb IIIC T85°C...T100°C Db
Class I Div 2 Group A,B,C,D T6...T5
Class II Div 2, Group F,G T6...T5

ETLlisted for Ex db IIC T6...T5 Gb

Canada Ex tb IIIC T85°C...T100°C Db
Class I Div 2 Group A,B,C,D T6...T5
Class II Div 2, Group F,G T6...T5

[email protected] | pelco.com Preliminary Specifications - Subject to Change 3

Analytics Specifications
Supported Video Analytic Events
The event is triggered when the selected object type moves into the region of interest. This event can be used to count
Objects in Area
objects.
The event is triggered when the selected object type moves into the region of interest and then stays for an extended
Object Loitering
amount of time.
The event is triggered when the specified number of objects have crossed the directional beam that is configured over the
Objects Crossing Beam
camera’s field of view. The beam can be unidirectional or bidirectional.
Object Appears or Enters
The event is triggered by each object that enters the region of interest.
Area
Object Not Present in
The event is triggered when no objects are present in the region of interest.
Area
Objects Enter Area The event is triggered when the specified number of objects have entered the region of interest.
Objects Leave Area The event is triggered when the specified number of objects have left the region of interest.
Object Stops in Area The event is triggered when an object moves into a region of interest and then stops moving for the specified threshold time.
Direction Violated The event is triggered when an object moves in the prohibited direction of travel.
Tamper Detection The event is triggered when the scene unexpectedly changes.

System Model Numbers

Resolution NETD Lens Pelco Smart Compression Radiometric
EXRE2-VF09-E0A00-1 640 x 512 < 50 mK 9.2 mm ✓ ✓
EXTE2-VF36-E0A00-1 640 x 512 < 50 mK 36.0 mm ✓
EXTE2-QF06-E0A00-1 320 x 256 < 50 mK 6.3 mm ✓
EXTE2-QF18-E0A00-1 320 x 256 < 50 mK 18.0 mm ✓
EXRE2-VF09-E0A00 640 x 512 < 50 mK 9.2 mm ✓ ✓
EXTE2-VF36-E0A00 640 x 512 < 50 mK 36.0 mm ✓
EXTE2-QF06-E0A00 320 x 256 < 50 mK 6.3 mm ✓
EXTE2-QF18-E0A00 320 x 256 < 50 mK 18.0 mm ✓

Mounting Accessories
Part # Description
NXWBS1 Wall bracket for use with EXF2230 cameras. AISI 316L stainless steel.
MHXWFWCA Parapet mounting bracket for use with EXF2230 cameras. AISI 316L stainless steel.
NXFWBT Vertical riser, 124 mm (4.9"), for use with EXF2230 cameras. AISI 316L stainless steel.
NXWTU Wall adapter module, for use with NXWBS1. AISI 316L stainless steel.
NXCOL Pole mount adapter for use with EXF2230 cameras or explosion proof washers. For pole diameters from 110 mm (4.3") to
150 mm (5.9"). Max load 50 kg (110 lb.). AISI 316L stainless steel.
NXCW Corner mount adapter for use with EXF2230 cameras or explosion proof washers. Max load 50 kg (110 lb.). AISI 316L
stainless steel.

Cabling
Item Description
TBD Cabling, 10m (32.8 ft), armored cable, barrier cable gland
TBD Cabling, 4m (13.1 ft), armored cable, barrier cable gland

[email protected] | pelco.com Preliminary Specifications - Subject to Change 4

Cable Glands and Accessories 3/4" NPT
Maximum
diameter Maximum
Maximum diameter of
of the diameter of the
Operating external the internal conductors
Type Certification Temp. Cable Part Number sheath (A) sheath (B) bundle (C)
Barrier Cable Gland IECEx / ATEX / -60°C (-76°F) / Unarmored OCTEXB3/4P 20.0 mm - 17.8 mm (0.7in)
EAC Ex +135°C (0.78 in)
(+275°F)
Armored OCTEXBA3/4P 16.8 - 23.9 20 mm (0.79 17.8 mm (0.7
mm (0.66- in) max in)
0.94 in)
Cable Gland with Gasket IECEx / ATEX / -60°C (-76°F) / Unarmoured OCTEX3/4C 13.0 - 20.2 - -
EAC Ex +100°C mm
(+212°F) (0.51-0.79 in)

-60°C (-76°F) / Armored OCTEXA3/4C 16.9 - 26.0 11.1 - 19.7 -

+80°C (+176°F) mm (0.66- mm (0.44 -
1.02 in) 0.78 in)
Plug EX 3/4"NPT IECEx / ATEX / -100°C (-148°F) - OEXPLUG3/4P - - -
EAC Ex /
+400°C
(+752°F)

Conduit Sealing Fitting IECEx / ATEX / -60°C (-76°F) / - OCTEXP3/4C - - 11.0 mm (0.43
cCSAus / +80°C (+176°F) in)
EAC Ex

Reduction 3/4" NPT x IECEx / ATEX / -100°C (-148°F) - OCTEX1/2-3/4P - - -

1/2" NPT EAC Ex / +400°C
(+752°F)

Explosion-Proof Communication Box

A communication box includes a 3-port RJ45 and 1 SFP port Ethernet switch and 24 VAC output for
powering up to one of the following:
n 2x EXC2602 fixed compact cameras
n 2x EXF2230 fixed cameras with 2x washer pump
n 1x EXP2230 PTZ camera with 1x washer pump
Part # Description
MBX1MAA AISI 316L stainless steel housing, 230 VAC input.
MBX2MAA AISI 316L stainless steel housing, 24 VAC input.
MBX3MAA AISI 316L stainless steel housing, 120 VAC input.
MBXMP Adapter plate for communication box to MPXCOL or MPXCW mounts. AISI 316L stainless steel housing.
MBXWRE Wrench for opening communication boxes, MBX.
MPXCOL Pole mount adapter for use with ExSite cameras. For pole diameters from 110 mm (4.3”) to 150 mm (5.9”). Max load
50 kg (110 lb.). AISI 316L stainless steel.
MPXCW Corner mount adapter for use with ExSite cameras. Max load 50 kg (110 lb.). AISI 316L stainless steel.

[email protected] | pelco.com Preliminary Specifications - Subject to Change 5

Outline Dimensions [X.X] INCHES
X MM
Camera

115

60
M5 Ø 101.5
5
A
14.

55 .5
Ø1

Ø1

A
Ø 40 269

Support
Learn more and find additional documentation at pelco.com or email [email protected] for specific
product support.

Jul 2024 | | Rev 1

© 2024 , Motorola Solutions, Inc. All rights reserved. MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. Pelco, the Pelco logo, and other trademarks associated with
Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. All other product names and services are the property of their
respective companies. Product specifications and availability are subject to change without notice.

[email protected] | pelco.com Preliminary Specifications - Subject to Change 6