SMOKE EXTRACTION

SYSTEMS

Comprehensive gravitational smoke extraction

systems including smoke vents, louvers, smoke
curtains and control equipment.

WWW.ALUCO.COM.PL
 z
NSHEV - Natural smoke and
heat exhaust ventilators

Contents

Aluco Fire 4
Aluco Ventra 30
Aluco Smoke Blocker 33

2 SMOKE EXTRACTION SYSTEMS

Smoke extraction systems
are a must
Most fire victims die not because of the fire itself, but through
poisoning with gaseous toxins

Most fire victims die not because of the people need to breathe and survive, but
fire itself, but through poisoning with also the ability to leave the room and
gaseous toxins. Smoke resulting from avoid panic under fire conditions. Smoke-
a fire can fill all rooms and entire areas free zones make it much easier for fire
in just a few minutes, quickly becoming services to quickly locate and extinguish
a death trap. the source of the fire.

Not only does smoke lead to the Since the NSHEV systems save lives in
inhalation of harmful vapours, but it also an emergency, no compromise should
reduces visibility, making it more difficult be made regarding their functionality.
to leave the hazard zone in time. In ALUCO SYSTEM offers high quality,
addition to the loss of orientation due to guaranteeing the operation of certified
the lack of visibility, the senses become NSHEV systems even after many years of
dulled by inhaling toxic gases. being used.

To prevent this, smoke exhaust ventilators Our products have been tested in
(NSHEV) remove the smoke through the accordance with the applicable standards,
roof before it collapses. Well-designed displaying high performance parameters.
and manufactured smoke exhaust Thanks to their high quality, our systems
ventilators provide not only the air that can be used for daily ventilation.

WWW.ALUCO.COM.PL 3
4 SMOKE EXTRACTION SYSTEMS
SMOKE VENTS
ALUCO FIRE
Smoke vents
to be installed
in the roof skylights

Smoke or smoke-ventilation vents

designed to remove smoke, harmful
gases and excess heat from buildings,
are adapted to be installed in continuous
or spot roof skylights.

As one of the basic elements of the

gravitational smoke exhaust system,
they can operate automatically or as one
of the main elements of extensive fire
protection systems.

The vents have all the necessary

documents allowing them to be used on
the European Union market and beyond
as a fire protection element that meets
the highest standards.

WWW.ALUCO.COM.PL 5
 Quality. Reliability. Durability.
The series of ALUCO FIRE SL smoke The vents are adapted to be installed
exhaust vents for continuous skylights, in the continuous and spot roof skylights.
due to the top quality of the materials it is
made of, is intended for customers who Flexible design with flaps in various
see the reliability of life-saving systems dimensions is another advantage
(such as the NSHEV system) as a priority. of ALUCO FIRE system.

Therefore, our system is characterized The possibility of using anti-slip gratings

by reliable operation, high durability under the smoke vents makes them
parameters and proven operation in safe for service teams and the user,
extremely unfavourable conditions and additionally securing against the risk
additionally it shows a high aerodynamic of falling from height.
coefficient.

6 SMOKE EXTRACTION SYSTEMS

 P - PNEUMATIC
SL - CONTINUOUS
DRIVE
SP - SPOT

ALUCO FIRE SL 2P
1 - SINGLE-FLAP
2 - DOUBLE-FLAP

Types of ALUCO FIRE smoke exhaust vents

Our smoke exhaust vents system is divided into four categories depending
on the implementation method and the number of flaps (wings)

Aluco Fire SL 1P 8
VENTS Aluco Fire SL 2P 12
TYPES Aluco Fire SP 1P 16
Aluco Fire SP 2P 22

WWW.ALUCO.COM.PL 7
 ALUCO FIRE SL 1P
Single-flap smoke exhaust vents
for continuous roof skylights

Key
A, B – smoke vent aperture dimensions
S – skylight’s width
L – skylight’s length
H – upstand’s height
h – deflector’s height
Z – hinges
α – flap opening angle

Dimensions even up to
2,500 x 2,500 mm
8 SMOKE EXTRACTION SYSTEMS
Mechanical and physical properties
SL 2000
Maximum snow load

WL 1500
Wind exposure classification

T - 15
Confirmed performance in extremely low temperatures

B 300
High temperature resistance class

160º
Opening angle

RE 10000
Operation reliability - 10,000 cycles for vents with electric ventilation function

Dimensions and aerodynamic surface of smoke exhaust

VENT GEOMETRIC AERODYNAMIC

DIMENSIONS SURFACE SURFACE

WIDTH LENGTH
[mm] [mm] AV [m2] AA[m2]

1000 1000 1,000 0,810

1000 1100 1,100 0,891
1000
1000
1000
1200
1300
1400
1,200
1,300
1,400
v 0,972
1,040
1,120
1000 1500 1,500 1,200
1000 1600 1,600 1,264
1000 1700 1,700 1,343
1000 1800 1,800 1,422
1000 1900 1,900 1,501
1000 2000 2,000 1,580
1000 2100 2,100 1,659
1000 2200 2,200 1,716
1000 2300 2,300 1,794
1000 2400 2,400 1,872
1000 2500 2,500 1,950
1000 2600 2,600 2,028
1000 2700 2,700 2,106
1000 2800 2,800 2,184
1000 2900 2,900 2,262
1000 3000 3,000 2,340
1100 1000 1,100 0,891
1100 1100 1,210 0,968
1100 1200 1,320 1,056
1100 1300 1,430 1,144
1100 1400 1,540 1,217
1100 1500 1,650 1,304

WWW.ALUCO.COM.PL 9
 VENT GEOMETRIC AERODYNAMIC VENT
VENT GEOMETRIC AERODYNAMIC
DIMENSIONS SURFACE SURFACE DIMENSIONS
DIMENSIONS SURFACE SURFACE

WIDTH LENGTH WIDTH LENGTH

[mm] [mm] AV [m2] AA[m2] [mm] [mm] AV [m2] AA[m2]
1100 1600 1,760 1,390 1400 1800 2,520 1,940
1100 1700 1,870 1,477 1400 1900 2,660 2,048
1100 1800 1,980 1,544 1400 2000 2,800 2,156
1100 1900 2,090 1,630 1400 2100 2,940 2,264
1100 2000 2,200 1,716 1400 2200 3,080 2,372
1100 2100 2,310 1,802 1400 2300 3,220 2,479
1100 2200 2,420 1,888 1400 2400 3,360 2,587
1100 2300 2,530 1,973 1400 2500 3,500 2,695
1100 2400 2,640 2,059 1400 2600 3,640 2,766
1100 2500 2,750 2,145 1400 2700 3,780 2,873
1100 2600 2,860 2,231 1400 2800 3,920 2,979
1100 2700 2,970 2,287 1400 2900 4,060 3,086
1100 2800 3,080 2,372 1400 3000 4,200 3,192
1100 2900 3,190 2,456 1500 1000 1,500 1,200
1100 3000 3,300 2,541 1500 1100 1,650 1,304
1200 1000 1,200 0,972 1500 1200 1,800 1,422
1200 1100 1,320 1,056 1500 1300 1,950 1,521
1200 1200 1,440 1,152 1500 1400 2,100 1,638
1200 1300 1,560 1,232 1500 1500 2,250 1,755
1200 1400 1,680 1,327 1500 1600 2,400 1,872
1200 1500 1,800 1,422 1500 1700 2,550 1,964
1200 1600 1,920 1,498 1500 1800 2,700 2,079
1200 1700 2,040 1,591 1500 1900 2,850 2,195
1200 1800 2,160 1,685 1500 2000 3,000 2,310
1200 1900 2,280 1,778 1500 2100 3,150 2,426
1200 2000 2,400 1,872 1500 2200 3,300 2,541
1200 2100 2,520 1,966 1500 2300 3,450 2,622
1200 2200 2,640 2,033 1500 2400 3,600 2,736
1200 2300 2,760 2,125 1500 2500 3,750 2,850
1200 2400 2,880 2,218 1500 2600 3,900 2,964
1200 2500 3,000 2,310 1500 2700 4,050 3,078
1300 1000 1,300 1,040 1500 2800 4,200 3,192
1300 1100 1,430 1,144 1500 2900 4,350 3,306
1300 1200 1,560 1,232 1500 3000 4,500 3,420
1300 1300 1,690 1,335 1600 1000 1,600 1,264
1300 1400 1,820 1,438 1600 1100 1,760 1,390
1300 1500 1,950 1,521 1600 1200 1,920 1,498
1300 1600 2,080 1,622 1600 1300 2,080 1,622
1300 1700 2,210 1,724 1600 1400 2,240 1,747
1300 1800 2,340 1,825 1600 1500 2,400 1,872
1300 1900 2,470 1,927 1600 1600 2,560 1,971
1300 2000 2,600 2,002 1600 1700 2,720 2,094
1300 2100 2,730 2,102 1600 1800 2,880 2,218
1300 2200 2,860 2,202 1600 1900 3,040 2,341
1300 2300 2,990 2,302 1600 2000 3,200 2,464
1300 2400 3,120 2,402 1600 2100 3,360 2,554
1300 2500 3,250 2,503 1600 2200 3,520 2,675
1300 2600 3,380 2,603 1600 2300 3,680 2,797
1300 2700 3,510 2,703 1600 2400 3,840 2,918
1300 2800 3,640 2,803 1600 2500 4,000 3,040
1300 2900 3,770 2,903 1600 2600 4,160 3,162
1300 3000 3,900 2,964 1600 2700 4,320 3,283
1400 1000 1,400 1,120 1600 2800 4,480 3,405
1400 1100 1,540 1,217 1600 2900 4,640 3,526
1400 1200 1,680 1,327 1600 3000 4,800 3,648
1400 1300 1,820 1,438 1700 1000 1,700 1,343
1400 1400 1,960 1,529 1700 1100 1,870 1,477
1400 1500 2,100 1,638 1700 1200 2,040 1,591
1400 1600 2,240 1,747 1700 1300 2,210 1,724
1400 1700 2,380 1,856 1700 1400 2,380 1,856

10 SMOKE EXTRACTION SYSTEMS

 VENT GEOMETRIC AERODYNAMIC VENT GEOMETRIC AERODYNAMIC
DIMENSIONS SURFACE SURFACE DIMENSIONS SURFACE SURFACE

WIDTH LENGTH WIDTH LENGTH

[mm] [mm] AV [m2] AA[m2] [mm] [mm] AV [m2] AA[m2]

1700 1500 2,550 1,964 2000 1200 2,400 1,872

1700 1600 2,720 2,094 2000 1300 2,600 2,002
1700 1700 2,890 2,225 2000 1400 2,800 2,156
1700 1800 3,060 2,356 2000 1500 3,000 2,310
1700 1900 3,230 2,487 2000 1600 3,200 2,464
1700 2000 3,400 2,584 2000 1700 3,400 2,584
1700 2100 3,570 2,713 2000 1800 3,600 2,736
1700 2200 3,740 2,842 2000 1900 3,800 2,888
1700 2300 3,910 2,972 2000 2000 4,000 3,040
1700 2400 4,080 3,101 2000 2100 4,200 3,192
1700 2500 4,250 3,230 2000 2200 4,400 3,344
1700 2600 4,420 3,359 2000 2300 4,600 3,450
1700 2700 4,590 3,488 2000 2400 4,800 3,600
1700 2800 4,760 3,618 2000 2500 5,000 3,750
1700 2900 4,930 3,698 2000 2600 5,200 3,900
1700 3000 5,100 3,825 2000 2700 5,400 4,050
1800 1000 1,800 1,422 2000 2800 5,600 4,704
1800 1100 1,980 1,544 2000 2900 5,800 4,350
1800 1200 2,160 1,685 2000 3000 6,000 4,500
1800 1300 2,340 1,825 2100 1600 3,360 2,554
1800 1400 2,520 1,940 2100 1700 3,570 2,713
1800 1500 2,700 2,079 2100 1800 3,780 2,873
1800 1600 2,880 2,218 2100 1900 3,990 3,032
1800 1700 3,060 2,356 2100 2000 4,200 3,192
1800 1800 3,240 2,462 2100 2100 4,410 3,352
1800 1900 3,420 2,599 2100 2200 4,620 3,465
1800 2000 3,600 2,736 2100 2300 4,830 3,623
1800 2100 3,780 2,873 2100 2400 5,040 3,780
1800 2200 3,960 3,010 2100 2500 5,250 3,938
1800 2300 4,140 3,146 2100 2600 5,460 4,095
1800 2400 4,320 3,283 2200 1600 3,520 2,675
1800 2500 4,500 3,420 2200 1700 3,740 2,842
1800 2600 4,680 3,557 2200 1800 3,960 3,010
1800 2700 4,860 3,645 2200 1900 4,180 3,177
1800 2800 5,040 3,780 2200 2000 4,400 3,344
1800 2900 5,220 3,915 2200 2100 4,620 3,465
1800 3000 5,400 4,050 2200 2200 4,840 3,630
1900 1000 1,900 1,501 2200 2300 5,060 3,795
1900 1100 2,090 1,630 2300 1600 3,680 2,797
1900 1200 2,280 1,778 2300 1700 3,910 2,972
1900 1300 2,470 1,927 2300 1800 4,140 3,146
1900 1400 2,660 2,048 2300 1900 4,370 3,321
1900 1500 2,850 2,195 2300 2000 4,600 3,450
1900 1600 3,040 2,341 2300 2100 4,830 3,623
1900 1700 3,230 2,487 2300 2200 5,060 3,795
1900 1800 3,420 2,599 2400 1600 3,840 2,918
1900 1900 3,610 2,744 2400 1700 4,080 3,101
1900 2000 3,800 2,888 2400 1800 4,320 3,283
1900 2100 3,990 3,032 2400 1900 4,560 3,466
1900 2200 4,180 3,177 2400 2000 4,800 3,600
1900 2300 4,370 3,321 2500 1600 4,000 3,040
1900 2400 4,560 3,466 2500 1700 4,250 3,230
1900 2500 4,750 3,563 2500 1800 4,500 3,420
1900 2600 4,940 3,705 2500 1900 4,750 3,563
1900 2700 5,130 3,848 2500 2000 5,000 3,750
1900 2800 5,320 3,990 2500 2100 5,250 3,938
1900 2900 5,510 4,133 2500 2200 5,500 4,125
1900 3000 5,700 4,275 2500 2300 5,750 4,313
2000 1000 2,000 1,580 2500 2400 6,000 4,500
2000 1100 2,200 1,716 2500 2500 6,250 4,688

WWW.ALUCO.COM.PL 11
 ALUCO FIRE SL 2P
Double-flap smoke exhaust vents
for continuous roof skylights

Key
A, B – smoke vent aperture dimensions
S – skylight’s width
L – skylight’s length
H – upstand’s height
h – deflector’s height
Z – hinges
α – flap opening angle

Dimensions even up to
3500 x 3000 mm
12 SMOKE EXTRACTION SYSTEMS
Mechanical and physical properties
SL 1500
Maximum snow load

WL 1500
Wind exposure classification

T - 15
Confirmed performance in extremely low temperatures

B 300
High temperature resistance class

90º
Opening angle

RE 10000
Operation reliability - 10,000 cycles for vents with electric ventilation function

Dimensions and aerodynamic surface of smoke exhaust

VENT GEOMETRIC AERODYNAMIC SURFACE

DIMENSIONS SURFACE

WIDTH LENGTH
[mm] [mm] AV [m2] AA[m2]

1900 1800 3,42 2,54

1900 1900 3,61 2,68
1900 2000 3,80 2,82
1900 2100 3,99 2,97
1900 2200 4,18 3,11
1900 2300 4,37 3,25
1900 2400 4,56 3,40
1900 2500 4,75 3,54
1900 2600 4,94 3,68
1900 2700 5,13 3,83
1900 2800 5,32 3,97
1900 2900 5,51 4,12
1900 3000 5,70 4,26
2000 1800 3,60 2,67
2000 1900 3,80 2,82
2000 2000 4,00 2,97
2000 2100 4,20 3,13
2000 2200 4,40 3,28
2000 2300 4,60 3,43
2000 2400 4,80 3,58
2000 2500 5,00 3,73
2000 2600 5,20 3,88
2000 2700 5,40 4,03
2000 2800 5,60 4,19
2000 2900 5,80 4,34
2000 3000 6,00 4,49
2100 1800 3,78 2,81

WWW.ALUCO.COM.PL 13
 VENT GEOMETRIC AERODYNAMIC VENT GEOMETRIC AERODYNAMIC
DIMENSIONS SURFACE SURFACE DIMENSIONS SURFACE SURFACE

WIDTH LENGTH WIDTH LENGTH

[mm] [mm] AV [m2] AA[m2] [mm] [mm] AV [m2] AA[m2]
2100 1900 3,99 2,97 2500 2700 6,75 5,07
2100 2000 4,20 3,13 2500 2800 7,00 5,26
2100 2100 4,41 3,28 2500 2900 7,25 5,45
2100 2200 4,62 3,44 2500 3000 7,50 5,64
2100 2300 4,83 3,60 2600 1800 4,68 3,49
2100 2400 5,04 3,76 2600 1900 4,94 3,68
2100 2500 5,25 3,92 2600 2000 5,20 3,88
2100 2600 5,46 4,08 2600 2100 5,46 4,08
2100 2700 5,67 4,24 2600 2200 5,72 4,28
2100 2800 5,88 4,40 2600 2300 5,98 4,48
2100 2900 6,09 4,56 2600 2400 6,24 4,68
2100 3000 6,30 4,72 2600 2500 6,50 4,88
2200 1800 3,96 2,94 2600 2600 6,76 5,07
2200 1900 4,18 3,11 2600 2700 7,02 5,27
2200 2000 4,40 3,28 2600 2800 7,28 5,47
2200 2100 4,62 3,44 2600 2900 7,54 5,67
2200 2200 4,84 3,61 2600 3000 7,80 5,87
2200 2300 5,06 3,78 2700 1800 4,86 3,62
2200 2400 5,28 3,94 2700 1900 5,13 3,83
2200 2500 5,50 4,11 2700 2000 5,40 4,03
2200 2600 5,72 4,28 2700 2100 5,67 4,24
2200 2700 5,94 4,45 2700 2200 5,94 4,45
2200 2800 6,16 4,61 2700 2300 6,21 4,65
2200 2900 6,38 4,78 2700 2400 6,48 4,86
2200 3000 6,60 4,95 2700 2500 6,75 5,07
2300 1800 4,14 3,08 2700 2600 7,02 5,27
2300 1900 4,37 3,25 2700 2700 7,29 5,48
2300 2000 4,60 3,43 2700 2800 7,56 5,69
2300 2100 4,83 3,60 2700 2900 7,83 5,90
2300 2200 5,06 3,78 2700 3000 8,10 6,10
2300 2300 5,29 3,95 2800 1800 5,04 3,76
2300 2400 5,52 4,13 2800 1900 5,32 3,97
2300 2500 5,75 4,30 2800 2000 5,60 4,19
2300 2600 5,98 4,48 2800 2100 5,88 4,40
2300 2700 6,21 4,65 2800 2200 6,16 4,61
2300 2800 6,44 4,83 2800 2300 6,44 4,83
2300 2900 6,67 5,00 2800 2400 6,72 5,04
2300 3000 6,90 5,18 2800 2500 7,00 5,26
2400 1800 4,32 3,21 2800 2600 7,28 5,47
2400 1900 4,56 3,40 2800 2700 7,56 5,69
2400 2000 4,80 3,58 2800 2800 7,84 5,90
2400 2100 5,04 3,76 2800 2900 8,12 6,12
2400 2200 5,28 3,94 2800 3000 8,40 6,33
2400 2300 5,52 4,13 2900 1800 5,22 3,89
2400 2400 5,76 4,31 2900 1900 5,51 4,12
2400 2500 6,00 4,49 2900 2000 5,80 4,34
2400 2600 6,24 4,68 2900 2100 6,09 4,56
2400 2700 6,48 4,86 2900 2200 6,38 4,78
2400 2800 6,72 5,04 2900 2300 6,67 5,00
2400 2900 6,96 5,23 2900 2400 6,96 5,23
2400 3000 7,20 5,41 2900 2500 7,25 5,45
2500 1800 4,50 3,35 2900 2600 7,54 5,67
2500 1900 4,75 3,54 2900 2700 7,83 5,90
2500 2000 5,00 3,73 2900 2800 8,12 6,12
2500 2100 5,25 3,92 2900 2900 8,41 6,34
2500 2200 5,50 4,11 2900 3000 8,70 6,57
2500 2300 5,75 4,30 3000 1800 5,40 4,03
2500 2400 6,00 4,49 3000 1900 5,70 4,26
2500 2500 6,25 4,68 3000 2000 6,00 4,49
2500 2600 6,50 4,88 3000 2100 6,30 4,72

14 SMOKE EXTRACTION SYSTEMS

 VENT GEOMETRIC AERODYNAMIC VENT GEOMETRIC AERODYNAMIC
DIMENSIONS SURFACE SURFACE DIMENSIONS SURFACE SURFACE

WIDTH LENGTH WIDTH LENGTH

[mm] [mm] AV [m2] AA[m2] [mm] [mm] AV [m2] AA[m2]

3000 2200 6,60 4,95 3400 3000 10,20 7,73

3000 2300 6,90 5,18 3500 1300 4,55 3,38
3000 2400 7,20 5,41 3500 1400 4,90 3,64
3000 2500 7,50 5,64 3500 1500 5,25 3,91
3000 2600 7,80 5,87 3500 1600 5,60 4,18
3000 2700 8,10 6,10 3500 1700 5,95 4,44
3000 2800 8,40 6,33 3500 1800 6,30 4,71
3000 2900 8,70 6,57 3500 1900 6,65 4,98
3000 3000 9,00 6,80 3500 2000 7,00 5,25
3100 1800 5,58 4,17 3500 2100 7,35 5,52
3100 1900 5,89 4,40 3500 2200 7,70 5,79
3100 2000 6,20 4,64 3500 2300 8,05 6,06
3100 2100 6,51 4,88 3500 2400 8,40 6,33
3100 2200 6,82 5,12 3500 2500 8,75 6,60
3100 2300 7,13 5,36 3500 2600 9,10 6,87
3100 2400 7,44 5,59 3500 2700 9,45 7,14
3100 2500 7,75 5,83 3500 2800 9,80 7,42
3100 2600 8,06 6,07 3500 2900 10,15 7,69
3100 2700 8,37 6,31 3500 3000 10,50 7,96
3100 2800 8,68 6,55
3100 2900 8,99 6,79
3100 3000 9,30 7,03
3200 1800 5,76 4,30
3200 1900 6,08 4,55
3200 2000 6,40 4,79
3200 2100 6,72 5,04
3200 2200 7,04 5,29
3200 2300 7,36 5,53
3200 2400 7,68 5,78
3200 2500 8,00 6,02
3200 2600 8,32 6,27
3200 2700 8,64 6,52
3200 2800 8,96 6,77
3200 2900 9,28 7,01
3200 3000 9,60 7,26
3300 1800 5,94 4,44
3300 1900 6,27 4,69
3300 2000 6,60 4,95
3300 2100 6,93 5,20
3300 2200 7,26 5,45
3300 2300 7,59 5,71
3300 2400 7,92 5,96
3300 2500 8,25 6,22
3300 2600 8,58 6,47
3300 2700 8,91 6,73
3300 2800 9,24 6,98
3300 2900 9,57 7,24
3300 3000 9,90 7,49
3400 1800 6,12 4,58
3400 1900 6,46 4,84
3400 2000 6,80 5,10
3400 2100 7,14 5,36
3400 2200 7,48 5,62
3400 2300 7,82 5,88
3400 2400 8,16 6,15
3400 2500 8,50 6,41
3400 2600 8,84 6,67
3400 2700 9,18 6,94
3400 2800 9,52 7,20
3400 2900 9,86 7,46

WWW.ALUCO.COM.PL 15
 ALUCO FIRE SP 1P
Single-flap spot smoke exhaust vents
with straight or straight-slanted upstand

Key
A, B – smoke vent aperture dimensions
H – upstand’s height
h – deflector’s height
Z – hinges
α – flap opening angle

Dimensions even up to
2000 x 3000 mm
16 SMOKE EXTRACTION SYSTEMS
Mechanical and physical properties
SL 2000
Maximum snow load

WL 1500
Wind exposure classification

T - 15
Confirmed performance in extremely low temperatures

B 300
High temperature resistance class

160º
Opening angle

RE 10000
Operation reliability - 10,000 cycles for vents with electric ventilation function

Dimensions and aerodynamic surface of smoke exhaust

AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

SURFACE SURFACE SURFACE SURFACE
WIDTH LENGTH SURFACE + DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1000 1000 1,00 0,67 0,76 0,68 0,76

1000 1100 1,10 0,74 0,83 0,74 0,84
1000 1200 1,20 0,80 0,91 0,80 0,91
1000 1300 1,30 0,86 0,98 0,87 0,99
1000 1400 1,40 0,92 1,06 0,93 1,07
1000 1500 1,50 0,98 1,13 0,99 1,14
1000 1600 1,60 1,05 1,21 1,06 1,22
1000 1700 1,70 1,11 1,29 1,12 1,30
1000 1800 1,80 1,17 1,36 1,18 1,38
1000 1900 1,90 1,23 1,44 1,25 1,45
1000 2000 2,00 1,29 1,51 1,31 1,53
1000 2100 2,10 1,35 1,59 1,37 1,61
1000 2200 2,20 1,41 1,66 1,43 1,68
1000 2300 2,30 1,47 1,74 1,49 1,76
1000 2400 2,40 1,53 1,81 1,56 1,84
1000 2500 2,50 1,59 1,89 1,62 1,92
1000 2600 2,60 1,65 1,96 1,68 1,99
1000 2700 2,70 1,71 2,04 1,74 2,07
1000 2800 2,80 1,77 2,11 1,80 2,15
1000 2900 2,90 1,83 2,19 1,86 2,23
1000 3000 3,00 1,89 2,26 1,93 2,30
1100 1000 1,10 0,74 0,83 0,74 0,84
1100 1100 1,21 0,80 0,92 0,81 0,92
1100 1200 1,32 0,87 1,00 0,88 1,01
1100 1300 1,43 0,94 1,08 0,95 1,09
1100 1400 1,54 1,01 1,16 1,02 1,18
1100 1500 1,65 1,07 1,25 1,09 1,26

WWW.ALUCO.COM.PL 17
 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

SURFACE SURFACE SURFACE SURFACE
WIDTH LENGTH SURFACE + DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1100 1600 1,76 1,14 1,33 1,15 1,35

1100 1700 1,87 1,21 1,41 1,22 1,43
1100 1800 1,98 1,27 1,50 1,29 1,52
1100 1900 2,09 1,34 1,58 1,36 1,60
1100 2000 2,20 1,40 1,66 1,42 1,69
1100 2100 2,31 1,47 1,74 1,49 1,77
1100 2200 2,42 1,53 1,83 1,56 1,86
1100 2300 2,53 1,60 1,91 1,63 1,94
1100 2400 2,64 1,66 1,99 1,69 2,03
1100 2500 2,75 1,73 2,07 1,76 2,11
1100 2600 2,86 1,79 2,16 1,83 2,20
1100 2700 2,97 1,86 2,24 1,89 2,28
1100 2800 3,08 1,92 2,32 1,96 2,37
1100 2900 3,19 1,99 2,40 2,03 2,45
1100 3000 3,30 2,05 2,49 2,09 2,54
1200 1000 1,20 0,80 0,91 0,80 0,91
1200 1100 1,32 0,87 1,00 0,88 1,01
1200 1200 1,44 0,94 1,09 0,95 1,10
1200 1300 1,56 1,02 1,18 1,03 1,19
1200 1400 1,68 1,09 1,27 1,10 1,28
1200 1500 1,80 1,16 1,36 1,18 1,38
1200 1600 1,92 1,23 1,45 1,25 1,47
1200 1700 2,04 1,30 1,54 1,32 1,56
1200 1800 2,16 1,37 1,63 1,40 1,66
1200 1900 2,28 1,44 1,72 1,47 1,75
1200 2000 2,40 1,51 1,81 1,54 1,84
1200 2100 2,52 1,58 1,90 1,61 1,94
1200 2200 2,64 1,65 1,99 1,69 2,03
1200 2300 2,76 1,72 2,08 1,76 2,12
1200 2400 2,88 1,79 2,17 1,83 2,21
1200 2500 3,00 1,86 2,26 1,90 2,31
1200 2600 3,12 1,93 2,35 1,97 2,40
1200 2700 3,24 2,00 2,44 2,04 2,49
1200 2800 3,36 2,07 2,53 2,12 2,59
1200 2900 3,48 2,14 2,62 2,19 2,68
1200 3000 3,60 2,21 2,71 2,26 2,77
1300 1000 1,30 0,86 0,98 0,87 0,99
1300 1100 1,43 0,94 1,08 0,95 1,09
1300 1200 1,56 1,02 1,18 1,03 1,19
1300 1300 1,69 1,09 1,28 1,11 1,29
1300 1400 1,82 1,17 1,38 1,19 1,39
1300 1500 1,95 1,25 1,47 1,27 1,49
1300 1600 2,08 1,32 1,57 1,35 1,59
1300 1700 2,21 1,40 1,67 1,42 1,70
1300 1800 2,34 1,48 1,77 1,50 1,80
1300 1900 2,47 1,55 1,86 1,58 1,90
1300 2000 2,60 1,62 1,96 1,66 2,00
1300 2100 2,73 1,70 2,06 1,73 2,10
1300 2200 2,86 1,77 2,16 1,81 2,20
1300 2300 2,99 1,85 2,25 1,89 2,30
1300 2400 3,12 1,92 2,35 1,96 2,40
1300 2500 3,25 1,99 2,45 2,04 2,50
1300 2600 3,38 2,07 2,54 2,12 2,61
1300 2700 3,51 2,14 2,64 2,19 2,71
1300 2800 3,64 2,21 2,74 2,27 2,81
1300 2900 3,77 2,29 2,84 2,34 2,91
1300 3000 3,90 2,36 2,93 2,42 3,01
1400 1000 1,40 0,92 1,06 0,93 1,07
1400 1100 1,54 1,01 1,16 1,02 1,18
1400 1200 1,68 1,09 1,27 1,10 1,28

18 SMOKE EXTRACTION SYSTEMS

 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

SURFACE SURFACE SURFACE SURFACE
WIDTH LENGTH SURFACE + DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1400 1300 1,82 1,17 1,38 1,19 1,39

1400 1400 1,96 1,25 1,48 1,27 1,50
1400 1500 2,10 1,33 1,59 1,36 1,61
1400 1600 2,24 1,42 1,69 1,44 1,72
1400 1700 2,38 1,50 1,80 1,52 1,83
1400 1800 2,52 1,57 1,90 1,60 1,94
1400 1900 2,66 1,65 2,01 1,69 2,05
1400 2000 2,80 1,73 2,11 1,77 2,15
1400 2100 2,94 1,81 2,21 1,85 2,26
1400 2200 3,08 1,89 2,32 1,93 2,37
1400 2300 3,22 1,97 2,42 2,01 2,48
1400 2400 3,36 2,05 2,53 2,09 2,59
1400 2500 3,50 2,12 2,63 2,18 2,70
1400 2600 3,64 2,20 2,74 2,26 2,81
1400 2700 3,78 2,28 2,84 2,34 2,92
1400 2800 3,92 2,35 2,95 2,42 3,03
1400 2900 4,06 2,43 3,05 2,50 3,14
1400 3000 4,20 2,51 3,16 2,58 3,25
1500 1000 1,50 0,98 1,13 0,99 1,14
1500 1100 1,65 1,07 1,25 1,09 1,26
1500 1200 1,80 1,16 1,36 1,18 1,38
1500 1300 1,95 1,25 1,47 1,27 1,49
1500 1400 2,10 1,33 1,59 1,36 1,61
1500 1500 2,25 1,42 1,70 1,44 1,73
1500 1600 2,40 1,51 1,81 1,53 1,84
1500 1700 2,55 1,59 1,92 1,62 1,96
1500 1800 2,70 1,67 2,03 1,71 2,08
1500 1900 2,85 1,76 2,15 1,79 2,19
1500 2000 3,00 1,84 2,26 1,88 2,31
1500 2100 3,15 1,92 2,37 1,97 2,43
1500 2200 3,30 2,00 2,48 2,05 2,55
1500 2300 3,45 2,09 2,60 2,14 2,66
1500 2400 3,60 2,17 2,71 2,22 2,78
1500 2500 3,75 2,25 2,82 2,31 2,90
1500 2600 3,90 2,33 2,93 2,40 3,02
1500 2700 4,05 2,41 3,04 2,48 3,13
1500 2800 4,20 2,49 3,16 2,56 3,25
1500 2900 4,35 2,57 3,27 2,65 3,37
1500 3000 4,50 2,65 3,38 2,73 3,49
1600 1000 1,60 1,05 1,21 1,06 1,22
1600 1100 1,76 1,14 1,33 1,15 1,35
1600 1200 1,92 1,23 1,45 1,25 1,47
1600 1300 2,08 1,32 1,57 1,35 1,59
1600 1400 2,24 1,42 1,69 1,44 1,72
1600 1500 2,40 1,51 1,81 1,53 1,84
1600 1600 2,56 1,59 1,93 1,63 1,97
1600 1700 2,72 1,68 2,05 1,72 2,09
1600 1800 2,88 1,77 2,17 1,81 2,22
1600 1900 3,04 1,86 2,29 1,90 2,34
1600 2000 3,20 1,95 2,41 1,99 2,47
1600 2100 3,36 2,03 2,53 2,08 2,59
1600 2200 3,52 2,12 2,65 2,17 2,72
1600 2300 3,68 2,20 2,77 2,26 2,84
1600 2400 3,84 2,29 2,89 2,35 2,97
1600 2500 4,00 2,37 3,01 2,44 3,10
1600 2600 4,16 2,46 3,13 2,53 3,22
1600 2700 4,32 2,54 3,24 2,62 3,35
1600 2800 4,48 2,63 3,36 2,71 3,47
1600 2900 4,64 2,71 3,48 2,80 3,60
1600 3000 4,80 2,80 3,60 2,89 3,72

WWW.ALUCO.COM.PL 19
 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

SURFACE SURFACE SURFACE SURFACE
WIDTH LENGTH SURFACE + DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1700 1000 1,70 1,11 1,29 1,12 1,30

1700 1100 1,87 1,21 1,41 1,22 1,43
1700 1200 2,04 1,30 1,54 1,32 1,56
1700 1300 2,21 1,40 1,67 1,42 1,70
1700 1400 2,38 1,50 1,80 1,52 1,83
1700 1500 2,55 1,59 1,92 1,62 1,96
1700 1600 2,72 1,68 2,05 1,72 2,09
1700 1700 2,89 1,78 2,18 1,82 2,23
1700 1800 3,06 1,87 2,30 1,91 2,36
1700 1900 3,23 1,96 2,43 2,01 2,49
1700 2000 3,4 2,05 2,56 2,10 2,63
1700 2100 3,57 2,14 2,68 2,20 2,76
1700 2200 3,74 2,23 2,81 2,29 2,89
1700 2300 3,91 2,32 2,94 2,39 3,03
1700 2400 4,08 2,41 3,06 2,48 3,16
1700 2500 4,25 2,50 3,19 2,57 3,29
1700 2600 4,42 2,59 3,32 2,67 3,43
1700 2700 4,59 2,67 3,44 2,76 3,56
1700 2800 4,76 2,76 3,57 2,85 3,70
1700 2900 4,93 2,85 3,70 2,94 3,83
1700 3000 5,10 2,93 3,82 3,04 3,96
1800 1000 1,80 1,17 1,36 1,18 1,38
1800 1100 1,98 1,27 1,50 1,29 1,52
1800 1200 2,16 1,37 1,63 1,40 1,66
1800 1300 2,34 1,48 1,77 1,50 1,80
1800 1400 2,52 1,57 1,90 1,60 1,94
1800 1500 2,70 1,67 2,03 1,71 2,08
1800 1600 2,88 1,77 2,17 1,81 2,22
1800 1700 3,06 1,87 2,30 1,91 2,36
1800 1800 3,24 1,96 2,44 2,01 2,50
1800 1900 3,42 2,06 2,57 2,11 2,64
1800 2000 3,60 2,15 2,71 2,21 2,78
1800 2100 3,78 2,25 2,84 2,31 2,92
1800 2200 3,96 2,34 2,97 2,41 3,07
1800 2300 4,14 2,43 3,11 2,51 3,21
1800 2400 4,32 2,53 3,24 2,61 3,35
1800 2500 4,5 2,62 3,38 2,70 3,49
1800 2600 4,68 2,71 3,51 2,80 3,63
1800 2700 4,86 2,80 3,65 2,90 3,78
1800 2800 5,04 2,89 3,78 2,99 3,92
1800 2900 5,22 2,98 3,91 3,09 4,06
1800 3000 5,40 3,07 4,05 3,19 4,20
1900 1000 1,90 1,23 1,44 1,25 1,45
1900 1100 2,09 1,34 1,58 1,36 1,60
1900 1200 2,28 1,44 1,72 1,47 1,75
1900 1300 2,47 1,55 1,86 1,58 1,90
1900 1400 2,66 1,65 2,01 1,69 2,05
1900 1500 2,85 1,76 2,15 1,79 2,19
1900 1600 3,04 1,86 2,29 1,90 2,34
1900 1700 3,23 1,96 2,43 2,01 2,49
1900 1800 3,42 2,06 2,57 2,11 2,64
1900 1900 3,61 2,16 2,71 2,22 2,79
1900 2000 3,80 2,26 2,86 2,32 2,94
1900 2100 3,99 2,35 3,00 2,42 3,09
1900 2200 4,18 2,45 3,14 2,53 3,24
1900 2300 4,37 2,55 3,28 2,63 3,39
1900 2400 4,56 2,64 3,42 2,73 3,54
1900 2500 4,75 2,74 3,56 2,83 3,69
1900 2600 4,94 2,83 3,70 2,93 3,84
1900 2700 5,13 2,93 3,85 3,03 3,99

20 SMOKE EXTRACTION SYSTEMS

 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

SURFACE SURFACE SURFACE SURFACE
WIDTH LENGTH SURFACE + DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1900 2800 5,32 3,02 3,99 3,13 4,14

1900 2900 5,51 3,11 4,13 3,23 4,29
1900 3000 5,70 3,21 4,27 3,33 4,44
2000 1000 2,00 1,29 1,51 1,31 1,53
2000 1100 2,20 1,40 1,66 1,42 1,69
2000 1200 2,40 1,51 1,81 1,54 1,84
2000 1300 2,60 1,62 1,96 1,66 2,00
2000 1400 2,80 1,73 2,11 1,77 2,15
2000 1500 3,00 1,84 2,26 1,88 2,31
2000 1600 3,20 1,95 2,41 1,99 2,47
2000 1700 3,40 2,05 2,56 2,10 2,63
2000 1800 3,60 2,15 2,71 2,21 2,78
2000 1900 3,80 2,26 2,86 2,32 2,94
2000 2000 4,00 2,36 3,00 2,43 3,10
2000 2100 4,20 2,46 3,15 2,54 3,26
2000 2200 4,40 2,56 3,30 2,64 3,41
2000 2300 4,60 2,66 3,45 2,75 3,57
2000 2400 4,80 2,76 3,60 2,85 3,73
2000 2500 5,00 2,86 3,75 2,96 3,89
2000 2600 5,20 2,95 3,90 3,06 4,05
2000 2700 5,40 3,05 4,04 3,17 4,21
2000 2800 5,60 3,15 4,19 3,27 4,36
2000 2900 5,80 3,24 4,34 3,37 4,52
2000 3000 6,00 3,34 4,49 3,48 4,68

WWW.ALUCO.COM.PL 21
 ALUCO FIRE SP 2P
Double-flap spot smoke exhaust vents
with straight or straight-slanted upstand

Key
A, B – smoke vent aperture dimensions
H – upstand’s height
h – deflector’s height
Z – hinges
α – flap opening angle

Dimensions even up to
3500 x 3000 mm

22 SMOKE EXTRACTION SYSTEMS

Mechanical and physical properties
SL 2000
Maximum snow load

WL 1500
Wind exposure classification

T - 15
Confirmed performance in extremely low temperatures

B 300
High temperature resistance class

90º
Opening angle

RE 10000
Operation reliability - 10,000 cycles for vents with electric ventilation function

Dimensions and aerodynamic surface of smoke exhaust

AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

H = 500 MM H = 500 MM

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

WIDTH LENGTH SURFACE SURFACE SURFACE SURFACE SURFACE
+ DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]

1900 1800 3,42 1,87 2,22 1,88 2,33

1900 1900 3,61 2,01 2,35 1,98 2,46
1900 2000 3,80 2,10 2,48 2,07 2,60
1900 2100 3,99 2,20 2,62 2,17 2,73
1900 2200 4,18 2,29 2,75 2,26 2,87
1900 2300 4,37 2,38 2,88 2,36 3,00
1900 2400 4,56 2,47 3,01 2,45 3,14
1900 2500 4,75 2,56 3,15 2,55 3,28
1900 2600 4,94 2,65 3,28 2,64 3,41
1900 2700 5,13 2,75 3,41 2,74 3,55
1900 2800 5,32 2,84 3,55 2,83 3,68
1900 2900 5,51 2,93 3,68 2,92 3,82
1900 3000 5,70 3,01 3,82 3,02 3,96
2000 1800 3,60 2,01 2,34 1,97 2,46
2000 1900 3,80 2,10 2,48 2,07 2,60
2000 2000 4,00 2,20 2,62 2,17 2,74
2000 2100 4,20 2,30 2,76 2,27 2,88
2000 2200 4,40 2,39 2,90 2,37 3,03
2000 2300 4,60 2,49 3,04 2,47 3,17
2000 2400 4,80 2,58 3,18 2,57 3,31
2000 2500 5,00 2,68 3,33 2,67 3,46
2000 2600 5,20 2,77 3,47 2,77 3,60
2000 2700 5,40 2,87 3,61 2,86 3,75
2000 2800 5,60 2,96 3,75 2,96 3,89
2000 2900 5,80 3,05 3,89 3,06 4,03
2000 3000 6,00 3,14 4,04 3,16 4,18
2100 1800 3,78 2,09 2,47 2,06 2,58

WWW.ALUCO.COM.PL 23
 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

H = 500 MM H = 500 MM

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

WIDTH LENGTH SURFACE SURFACE SURFACE SURFACE SURFACE
+ DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]
2100 1900 3,99 2,20 2,62 2,17 2,73
2100 2000 4,20 2,30 2,76 2,27 2,88
2100 2100 4,41 2,40 2,91 2,38 3,03
2100 2200 4,62 2,50 3,06 2,48 3,18
2100 2300 4,83 2,60 3,21 2,58 3,34
2100 2400 5,04 2,69 3,36 2,69 3,49
2100 2500 5,25 2,79 3,50 2,79 3,64
2100 2600 5,46 2,89 3,65 2,89 3,79
2100 2700 5,67 2,99 3,80 2,99 3,94
2100 2800 5,88 3,08 3,95 3,09 4,10
2100 2900 6,09 3,18 4,10 3,19 4,25
2100 3000 6,30 3,27 4,26 3,30 4,40
2200 1800 3,96 2,18 2,59 2,16 2,71
2200 1900 4,18 2,29 2,75 2,26 2,87
2200 2000 4,40 2,39 2,90 2,37 3,03
2200 2100 4,62 2,50 3,06 2,48 3,18
2200 2200 4,84 2,60 3,21 2,59 3,34
2200 2300 5,06 2,70 3,37 2,70 3,50
2200 2400 5,28 2,80 3,53 2,80 3,66
2200 2500 5,50 2,90 3,69 2,91 3,82
2200 2600 5,72 3,00 3,84 3,01 3,98
2200 2700 5,94 3,10 4,00 3,12 4,14
2200 2800 6,16 3,20 4,16 3,22 4,30
2200 2900 6,38 3,30 4,32 3,33 4,46
2200 3000 6,60 3,40 4,48 3,43 4,62
2300 1800 4,14 2,27 2,72 2,25 2,84
2300 1900 4,37 2,38 2,88 2,36 3,00
2300 2000 4,60 2,49 3,04 2,47 3,17
2300 2100 4,83 2,60 3,21 2,58 3,34
2300 2200 5,06 2,70 3,37 2,70 3,50
2300 2300 5,29 2,81 3,54 2,81 3,67
2300 2400 5,52 2,91 3,70 2,92 3,84
2300 2500 5,75 3,02 3,87 3,03 4,00
2300 2600 5,98 3,12 4,03 3,14 4,17
2300 2700 6,21 3,22 4,20 3,24 4,34
2300 2800 6,44 3,32 4,37 3,35 4,51
2300 2900 6,67 3,42 4,53 3,46 4,68
2300 3000 6,90 3,52 4,70 3,57 4,85
2400 1800 4,32 2,36 2,84 2,34 2,97
2400 1900 4,56 2,47 3,01 2,45 3,14
2400 2000 4,80 2,58 3,18 2,57 3,31
2400 2100 5,04 2,69 3,36 2,69 3,49
2400 2200 5,28 2,80 3,53 2,80 3,66
2400 2300 5,52 2,91 3,70 2,92 3,84
2400 2400 5,76 3,02 3,87 3,03 4,01
2400 2500 6,00 3,13 4,05 3,14 4,19
2400 2600 6,24 3,23 4,22 3,26 4,36
2400 2700 6,48 3,34 4,40 3,37 4,54
2400 2800 6,72 3,44 4,57 3,48 4,72
2400 2900 6,96 3,55 4,75 3,59 4,89
2400 3000 7,20 3,65 4,92 3,70 5,07
2500 1800 4,50 2,45 2,97 2,43 3,09
2500 1900 4,75 2,56 3,15 2,55 3,28
2500 2000 5,00 2,68 3,33 2,67 3,46
2500 2100 5,25 2,79 3,50 2,79 3,64
2500 2200 5,50 2,90 3,69 2,91 3,82
2500 2300 5,75 3,02 3,87 3,03 4,00
2500 2400 6,00 3,13 4,05 3,14 4,19
2500 2500 6,25 3,24 4,23 3,26 4,37
2500 2600 6,50 3,34 4,41 3,38 4,55

24 SMOKE EXTRACTION SYSTEMS

 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

H = 500 MM H = 500 MM

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

WIDTH LENGTH SURFACE SURFACE SURFACE SURFACE SURFACE
+ DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]
2500 2700 6,75 3,45 4,60 3,49 4,74
2500 2800 7,00 3,56 4,78 3,61 4,92
2500 2900 7,25 3,67 4,96 3,72 5,11
2500 3000 7,50 3,77 5,15 3,84 5,29
2600 1800 4,68 2,54 3,09 2,52 3,22
2600 1900 4,94 2,65 3,28 2,64 3,41
2600 2000 5,20 2,77 3,47 2,77 3,60
2600 2100 5,46 2,89 3,65 2,89 3,79
2600 2200 5,72 3,00 3,84 3,01 3,98
2600 2300 5,98 3,12 4,03 3,14 4,17
2600 2400 6,24 3,23 4,22 3,26 4,36
2600 2500 6,50 3,34 4,41 3,38 4,55
2600 2600 6,76 3,46 4,60 3,50 4,75
2600 2700 7,02 3,57 4,79 3,62 4,94
2600 2800 7,28 3,68 4,99 3,74 5,13
2600 2900 7,54 3,78 5,18 3,85 5,32
2600 3000 7,80 3,89 5,37 3,97 5,52
2700 1800 4,86 2,62 3,22 2,61 3,35
2700 1900 5,13 2,75 3,41 2,74 3,55
2700 2000 5,40 2,87 3,61 2,86 3,75
2700 2100 5,67 2,99 3,80 2,99 3,94
2700 2200 5,94 3,10 4,00 3,12 4,14
2700 2300 6,21 3,22 4,20 3,24 4,34
2700 2400 6,48 3,34 4,40 3,37 4,54
2700 2500 6,75 3,45 4,60 3,49 4,74
2700 2600 7,02 3,57 4,79 3,62 4,94
2700 2700 7,29 3,68 5,00 3,74 5,14
2700 2800 7,56 3,79 5,20 3,86 5,34
2700 2900 7,83 3,90 5,40 3,98 5,54
2700 3000 8,10 4,01 5,60 4,11 5,74
2800 1800 5,04 2,71 3,35 2,70 3,48
2800 1900 5,32 2,84 3,55 2,83 3,68
2800 2000 5,60 2,96 3,75 2,96 3,89
2800 2100 5,88 3,08 3,95 3,09 4,10
2800 2200 6,16 3,20 4,16 3,22 4,30
2800 2300 6,44 3,32 4,37 3,35 4,51
2800 2400 6,72 3,44 4,57 3,48 4,72
2800 2500 7,00 3,56 4,78 3,61 4,92
2800 2600 7,28 3,68 4,99 3,74 5,13
2800 2700 7,56 3,79 5,20 3,86 5,34
2800 2800 7,84 3,90 5,40 3,99 5,55
2800 2900 8,12 4,02 5,61 4,11 5,76
2800 3000 8,40 4,13 5,83 4,24 5,97
2900 1800 5,22 2,80 3,47 2,79 3,61
2900 1900 5,51 2,93 3,68 2,92 3,82
2900 2000 5,80 3,05 3,89 3,06 4,03
2900 2100 6,09 3,18 4,10 3,19 4,25
2900 2200 6,38 3,30 4,32 3,33 4,46
2900 2300 6,67 3,42 4,53 3,46 4,68
2900 2400 6,96 3,55 4,75 3,59 4,89
2900 2500 7,25 3,67 4,96 3,72 5,11
2900 2600 7,54 3,78 5,18 3,85 5,32
2900 2700 7,83 3,90 5,40 3,98 5,54
2900 2800 8,12 4,02 5,61 4,11 5,76
2900 2900 8,41 4,13 5,83 4,24 5,98
2900 3000 8,70 4,25 6,05 4,37 6,20
3000 1800 5,40 2,88 3,60 2,88 3,74
3000 1900 5,70 3,01 3,82 3,02 3,96
3000 2000 6,00 3,14 4,04 3,16 4,18
3000 2100 6,30 3,27 4,26 3,30 4,40

WWW.ALUCO.COM.PL 25
 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

H = 500 MM H = 500 MM

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

WIDTH LENGTH SURFACE SURFACE SURFACE SURFACE SURFACE
+ DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]
3000 2200 6,60 3,40 4,48 3,43 4,62
3000 2300 6,90 3,52 4,70 3,57 4,85
3000 2400 7,20 3,65 4,92 3,70 5,07
3000 2500 7,50 3,77 5,15 3,84 5,29
3000 2600 7,80 3,89 5,37 3,97 5,52
3000 2700 8,10 4,01 5,60 4,11 5,74
3000 2800 8,40 4,13 5,83 4,24 5,97
3000 2900 8,70 4,25 6,05 4,37 6,20
3000 3000 9,00 4,37 6,28 4,50 6,42
3100 1800 5,58 2,97 3,72 2,97 3,87
3100 1900 5,89 3,10 3,95 3,11 4,09
3100 2000 6,20 3,24 4,18 3,25 4,32
3100 2100 6,51 3,37 4,41 3,40 4,55
3100 2200 6,82 3,50 4,64 3,54 4,78
3100 2300 7,13 3,63 4,87 3,68 5,01
3100 2400 7,44 3,75 5,10 3,82 5,25
3100 2500 7,75 3,88 5,33 3,95 5,48
3100 2600 8,06 4,00 5,57 4,09 5,71
3100 2700 8,37 4,12 5,80 4,23 5,95
3100 2800 8,68 4,24 6,04 4,36 6,18
3100 2900 8,99 4,36 6,27 4,50 6,41
3100 3000 9,30 4,48 6,51 4,63 6,65
3200 1800 5,76 3,05 3,85 3,05 4,00
3200 1900 6,08 3,19 4,08 3,20 4,23
3200 2000 6,40 3,33 4,32 3,35 4,47
3200 2100 6,72 3,46 4,56 3,50 4,71
3200 2200 7,04 3,59 4,80 3,64 4,94
3200 2300 7,36 3,73 5,04 3,78 5,18
3200 2400 7,68 3,85 5,28 3,93 5,42
3200 2500 8,00 3,98 5,52 4,07 5,66
3200 2600 8,32 4,11 5,76 4,21 5,91
3200 2700 8,64 4,23 6,00 4,35 6,15
3200 2800 8,96 4,35 6,25 4,49 6,39
3200 2900 9,28 4,48 6,49 4,62 6,63
3200 3000 9,60 4,60 6,74 4,76 6,88
3300 1800 5,94 3,14 3,98 3,14 4,13
3300 1900 6,27 3,28 4,22 3,30 4,37
3300 2000 6,60 3,42 4,46 3,45 4,61
3300 2100 6,93 3,56 4,71 3,60 4,86
3300 2200 7,26 3,69 4,96 3,74 5,11
3300 2300 7,59 3,82 5,20 3,89 5,35
3300 2400 7,92 3,96 5,45 4,04 5,60
3300 2500 8,25 4,09 5,70 4,18 5,85
3300 2600 8,58 4,21 5,95 4,32 6,10
3300 2700 8,91 4,34 6,21 4,47 6,35
3300 2800 9,24 4,46 6,46 4,61 6,60
3300 2900 9,57 4,59 6,71 4,75 6,85
3300 3000 9,90 4,71 6,97 4,89 7,11
3400 1800 6,12 3,23 4,10 3,23 4,25
3400 1900 6,46 3,37 4,35 3,39 4,51
3400 2000 6,80 3,51 4,61 3,54 4,76
3400 2100 7,14 3,65 4,86 3,70 5,01
3400 2200 7,48 3,79 5,12 3,85 5,27
3400 2300 7,82 3,92 5,37 4,00 5,52
3400 2400 8,16 4,06 5,63 4,15 5,78
3400 2500 8,50 4,19 5,89 4,29 6,04
3400 2600 8,84 4,32 6,15 4,44 6,29
3400 2700 9,18 4,45 6,41 4,59 6,55
3400 2800 9,52 4,57 6,67 4,73 6,81
3400 2900 9,86 4,70 6,94 4,87 7,07

26 SMOKE EXTRACTION SYSTEMS

 AERODYNAMIC SURFACE

STRAIGHT UPSTAND STRAIGHT-SLANTED UPSTAND

H = 500 MM H = 500 MM

VENT DIMENSIONS GEOMETRIC AERODYNAMIC AERODYNAMIC AERODYNAMIC AERODYNAMIC

WIDTH LENGTH SURFACE SURFACE SURFACE SURFACE SURFACE
+ DEFLECTORS + DEFLECTORS
[mm] [mm] AV [m2] AA[m2] AA[m2] AA[m2] AA[m2]
3400 3000 10,20 4,82 7,20 5,02 7,33
3500 1300 4,55 2,53 2,96 2,49 3,10
3500 1400 4,90 2,70 3,21 2,66 3,36
3500 1500 5,25 2,85 3,46 2,83 3,61
3500 1600 5,60 3,01 3,72 3,00 3,87
3500 1700 5,95 3,16 3,97 3,16 4,13
3500 1800 6,30 3,31 4,23 3,32 4,38
3500 1900 6,65 3,46 4,49 3,48 4,64
3500 2000 7,00 3,60 4,75 3,64 4,90
3500 2100 7,35 3,74 5,01 3,80 5,17
3500 2200 7,70 3,88 5,28 3,95 5,43
3500 2300 8,05 4,02 5,54 4,10 5,69
3500 2400 8,40 4,16 5,81 4,26 5,96
3500 2500 8,75 4,29 6,08 4,41 6,22
3500 2600 9,10 4,42 6,34 4,56 6,49
3500 2700 9,45 4,55 6,61 4,71 6,76
3500 2800 9,80 4,68 6,88 4,85 7,02
3500 2900 10,15 4,81 7,16 5,00 7,29
3500 3000 10,50 4,94 7,43 5,15 7,56

WWW.ALUCO.COM.PL 27
 Smoke vents with
thermal insulation

ALUCO FIRE HI

We have expanded the basic series of smoke vents

with a highly insulated HI version (HIGH INSULATED)

The HI version of Aluco Fire utilizes insu- ALUCO FIRE HI smoke exhaust vents are
lated aluminum profiles in order to elimi- dedicated to facilities with strict thermal
nate the problem of “thermal bridges”. insulation requirements and users that
With above-average thermal insulation value products minimizing heat loss.
properties, these vents achieve the total
heat transfer coefficient at the level of:
U <0.5 W/m2K.

28 SMOKE EXTRACTION SYSTEMS

WWW.ALUCO.COM.PL 29
 Wide range of
applications on
facades

ALUCO VENTRA
Louvers designed for installation on the roof or facade, with
functions for smoke removal, ventilation and aeration.

Aluco VENTRA louvers are installed in the Materiały

facade or on the roof as smoke ventilation
The louvers are constructed from high-quality
systems compliant with PN-EN 12101-2,
AlMg3 aluminum, ensuring 100% corrosion
or as ventilation and aeration equipment
resistance.
for smoke ventilation systems. They can
rapidly extract substantial quantities of
hot air and smoke from the building. The
Dimensions
louvers are manufactured in accordance • Width: 300–2400 mm
with ISO 9001 quality control standards • Length: 761–3804 mm (up to 17 louvre
and can be operated using pneumatic or lamellas)
electric systems.

30 SMOKE EXTRACTION SYSTEMS

 Louvre lamellas
• AL – single aluminum
Opening angle • AL ISO – thermally insulated aluminum
Individual control in the range from 0° to 90° • PC16 – 16-mm polycarbonate panels

Ventilation control • PC25 – 25-mm polycarbonate panels

• GLASS – single or double glass
• P – pneumatic (opening)
• P2 – pneumatic (opening / closing)
• M230V – 230 V electrical

Smoke extraction control

• PF – pneumatic (opening)
• P2F – pneumatic (opening / closing)
• M24V – 24 V electrical

WWW.ALUCO.COM.PL 31
 Smoke extraction alarm systems (Fig. 1). This integration
allows for fire detection, control of the
and aeration control smoke ventilation section, and control of
the air make-up section (including fresh air
systems louvres, traffic doors, etc.).

Our smoke ventilation systems are main-

ly used in industrial facilities and they are
typically operated using compressed car-
bon dioxide. The individual sections are
released by electromagnetic pulses from
our control units, following predefined pri-
orities.

Our product range includes smoke vent

emergency switch boxes equipped with
CO2 cartridges weighing up to 1500 g.
These can be operated manually or trig-
gered by a 24-V pulse from the fire alarm
system or an integrated smoke ventilation
control unit.

The individual control components are in-

terconnected to form complete systems
that are integrated with the building’s fire

Rys. 1
Example of the inte-
gration of the individ-
ual components of
the smoke extraction
32 SMOKE EXTRACTION SYSTEMS
system.
 The ALUCO curtain
is certified and
manufactured in
accordance with
PN-EN 12101-1

ALUCO SMOKE BLOCKER

Smoke curtains to separate smoke zones
and restrict smoke spreading
ALUCO SMOKE BLOCKER textile smoke curtain is constructed from sheets of ma-
curtains, typically made from TEG-120 terial with an overlap of 100 mm or wider
grey fabric composed of continuous to ensure smoke tightness in accordance
glass fiber, are designed for large-scale with PN-EN 12101-1.
facilities, mainly industrial buildings like
• Bottom curtain tensioning angles
warehouses or production facilities.
consist of two angles bolted together to
tighten the curtain and maintain its tidy
ALUCO SMOKE BLOCKER fixed textile
appearance.
smoke curtains are used to separate
smoke zones and limit the spread of Advantages of smoke curtains
smoke in large-scale buildings. They
possess an extremely lightweight struc- • Lower implementation costs and reduced
ture, simplifying installation. Their most weight. Additionally, smoke curtains do not
notable attribute is the non-flammable require an additional steel support structure
material. They can also be combined in for installation.
modules to create a product of any size, • Quick and easy installation.
rendering them suitable for larger spac-
es. • Fixed smoke curtains can be used to pre-
cise seal service penetrations.

Curtain design • The smoke curtain can be installed on var-

ious structures, including troughed sheets.
• Top mounting angles are attached
to any structure used for installing the • There is no need to install a support struc-
smoke curtain. This system does not re- ture.
quire a dedicated support structure for
the curtain.

• Non-flammable smoke curtain mate-

rial is made from glass fiber with varying
lengths and widths. For larger areas, the
WWW.ALUCO.COM.PL 33
 Let There Be
Daylight

34 SMOKE EXTRACTION SYSTEMS

 About us
We help our customers
take full advantage of
natural light

At Aluco System, we have been helping

our customers to make the most of the
benefits of natural daylight for over 20
years.

Our company’s product range includes:

- roof skylight systems,

- natural smoke exhaust systems,

- polycarbonate façades,

- aluminium joinery,

- industrial ventilation,

- Lumira® aerogel,

- thermal modernization.

Our priorities are technological de-

velopment, energy efficiency and top
materials. Our solutions have been
Selected customers: Fiat Chrysler used in dozens of facilities throughout
Automobiles, Skanska, Volkswagen, Poland, both in industrial buildings
LOT, PKP CARGO, MAN, Eiffage, Budimex, and architectural projects with a bold
Castorama, Cersanit, MediaMarkt, concept. We are a 100% Polish capital
Rockwool, Echo Investment, Targi Kielce, company.
DS Smith, Cerrad, Forte, Browary Tyskie.
We perform orders all over the Europe-
an Union and beyond.

WWW.ALUCO.COM.PL 35
 ALUCO SYSTEM SP. Z O.O.

Pańska 84

25-811 Kielce, Poland

[email protected]

+48 41 346 47 43

#LetThereBeDaylight

WWW.ALUCO.COM.PL