Scribd
Upload
29 views

ELD9151.045 SpecSheet

Uploaded by

Modern Designs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views

ELD9151.045 SpecSheet

Uploaded by

Modern Designs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Equipment Specification

Part No ELD9151.045 LED indications


Description '4.5KVA SPN INV S1.5 Mains healthy
Mains Supply Supply from battery (mains failure)
Voltage 230 Battery high volts
V
Frequency 50 Battery low volts
Hz
Phase 1 Charge fail
Phase Current 28 System fault
A
Output (Mains Healthy) Common alarm
Voltage 230 Deep discharge protection
V
Power 4500 Maintained circuit on
VA
Phase 1 System inhibited
Inverter Output
Voltage 230 Meters
V
Frequency 50
Digital battery voltage
Hz
Duration 1.5H Digital battery charge/discharge current
H
THD <5% Digital AC output voltage
Waveform Sinusoidal Digital AC output current
Power factor range 0.9 Lead to 0.7 Lag
Phase 1 Alarms
Inverter Nominal Rating System healthy – c/o contact
VA 4500 BMS indication – c/o contact
VA
Wattage 3825 Audible alarm (mutable)
W
Inverter ICEL Rating
VA Controls
3750 VA
Watts 3187 Final exit interlock
W
Battery Sub-circuit monitor
Number of cells 54 Maintained circuit control
Number of banks 1
12/24V DC fire alarm control
Nominal voltage 108 Remote MCB monitoring
V
Ampere hour 90 Ah
Type VRLA Changeover Device
Contactor to BS 5424
Charger
Float voltage 122.04 Charger
V
Constant voltage current limited with temperature
Maximum charge current 10 compensation
Amp
Voltage control to ±1% with full mains supply variations
Temperature compensation -4mV/Cell/ °C
Protection Devices Inverter voltage regulation
Mains input switch 63A 2 Pole Static ±2% 0-100% load
Charger MCB rating (MCB1) 16A 2 Pole Type D Dynamic ±6% full load
Battery MCB rating (MCB2) 80A 2 Pole Type B
DC control MCB (MCB3) 6A 2 Pole Type B Inverter overload
AC control MCB (MCB4) 6A 2 Pole Type B 150% for 1 minute at full output voltage
Distribution MCB (MCB5) None 200% for 10 seconds at full output voltage
Exit circuit fuse (F1) 100 mA - 5 x 20mm 350% for 5 second short circuit load

Physical Dimensions Compliance


Input terminals 35mm CE
Output terminals 35mm BS EN 50171
Auxiliary terminals 2.5mm ICEL 1009

Control cabinet 1 H1800 W750 D725mm


Control cabinet 2
Control cabinet 3
Control cabinet 4

Battery cabinet(s)

Weight (Including battery) 784 Kg

Printed by: GBIBMOH 24.07.2017 08:41:11 : Top entry gland plate

You might also like