Chapter 20: Entropy and Second Law of Thermodynamics

(Fundamental of Physics, 10th edition)

❑ 4 lectures (2 weeks, 6 hours) for this chapter:

• Lesson-7: Concept of entropy, Change in entropy for reversible

and irreversible process , related problems, Second law of
thermodynamics in terms of entropy, entropy in the real world:
engine, Carnot engine and its working principles.
• Lesson 8: Work done, entropy change and efficiency calculation of a
Carnot engine, related problems, Comparison: ideal engine, Carnot engine
and real engines.
 Lesson -7

20-1 Irreversible process and entropy:

❑ One-way (irreversible) processes:
• Processes can occur only in a certain sequence (the right way) and never in the reverse
sequence (the wrong way). An egg is dropped onto a floor, a pizza is baked.
• These one-way processes are irreversible, meaning that they cannot be reversed by means of
only small changes in their environment.
• The key to understanding why one-way processes cannot be reversed involves a quantity
known as entropy.

❑ Entropy postulate:
“If an irreversible process occurs in a closed system, the entropy S of the system always
increases; it never decreases”. [∆𝑆 > 0]

➢ Entropy differs from energy in that entropy does not obey a conservation law. The energy of a
closed system is conserved; it always remains constant. For irreversible processes, the
entropy of a closed system always increases.
20-1 Change in entropy:

We define the change in entropy 𝑆𝑓 − 𝑆𝑖 of a system during a process that takes

the system from an initial state i to a final state f as

𝑓
𝑑𝑄
∆𝑆 = 𝑆𝑓 − 𝑆𝑖 = න
𝑖 𝑇

Here Q is the energy transferred as heat to or from the system during the process, and T is the
temperature of the system in kelvins. Thus, an entropy change depends not only on the energy
transferred as heat but also on the temperature at which the transfer takes place. Because T is
always positive, the sign of ∆𝑆 is the same as that of Q. The SI unit for entropy and entropy
change is the joule per kelvin.
Reversible isothermal expansion:

𝑓 𝑑𝑄 1 𝑓 𝑄
∆𝑆 = ‫𝑇 𝑖׬‬ = ‫𝑄𝑑 𝑖׬‬ =
𝑇 𝑇

To keep the temperature T of the gas constant during the isothermal

expansion, heat Q must have been energy transferred from the reservoir to
the gas. Thus, Q is positive and the entropy of the gas increases during the
isothermal process.

➢ To find the entropy change for an irreversible process, replace that process
with any reversible process that connects the same initial and final states.
Calculate the entropy change for this reversible process with
𝑓 𝑑𝑄
∆𝑆 = ‫𝑖׬‬ .
𝑇
20-1 Entropy as a state function (state property):
We can prove that entropy is a state function for the special and important case
in which an ideal gas is taken through a reversible process.
To make the process reversible, it is done slowly in a series of small steps,
with the gas in an equilibrium state at the end of each step. For each small
step, the energy transferred as heat to or from the gas is 𝒅𝑸, the work done
by the gas is 𝒅𝑾, and the change in internal energy is 𝒅𝑬𝒊𝒏𝒕 .

𝐅𝐢𝐫𝐬𝐭 𝐥𝐚𝐰 𝐨𝐟 𝐭𝐡𝐞𝐫𝐦𝐨𝐝𝐲𝐧𝐚𝐢𝐜𝐬, 𝐝𝐄𝐢𝐧𝐭 = 𝐝𝐐 − 𝐝𝐖

𝒅𝑸 = 𝒅𝑾 + 𝒅𝑬𝒊𝒏𝒕

We know, for reversible process 𝒅𝑾 = 𝒑 𝒅𝑽

𝒅𝑬𝒊𝒏𝒕 = 𝒏𝑪𝒗 𝒅𝑻

𝒅𝑸 = 𝒑 𝒅𝑽 + 𝒏𝑪𝒗 𝒅𝑻
 𝑛𝑅𝑇
Ideal gas law, pV = nRT ∴𝑝=
𝑉
𝑛𝑅𝑇
𝑑𝑄 = 𝑑𝑉 + 𝑛𝐶𝑣 𝑑𝑇
𝑉
𝑑𝑄 𝑑𝑉 𝑑𝑇
= 𝑛𝑅 + 𝑛𝐶𝑣
𝑇 𝑉 𝑇
Integrating each term between an arbitrary initial state 𝑖 and an arbitrary final state 𝑓,
𝒇 𝒇 𝒇
𝒅𝑸 𝒅𝑽 𝒅𝑻
න = න 𝒏𝑹 + න 𝒏𝑪𝒗
𝒊 𝑻 𝒊 𝑽 𝒊 𝑻
𝒇 𝒇
∆𝑺 = 𝒏𝑹[𝒍𝒏𝑽]𝒊 +𝒏𝑪𝒗 [𝒍𝒏𝑻]𝒊
𝑽𝒇 𝑻𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏
𝑽𝒊 𝑻𝒊
Thus, the change in entropy ∆𝑺 between the initial and final states of an ideal gas depends only
on properties of the initial state (Vi and Ti) and properties of the final state (Vf and Tf); ∆𝑺 does
not depend on how the gas changes between the two states.
Sample Problem 20.02: Suppose 1.0 mol of nitrogen gas is confined to the
left side of the container of Fig. 20-1a. You open the stopcock, and the
volume of the gas doubles. What is the entropy change of the gas for this
Solution: process?
irreversible
𝐇𝐞𝐫𝐞, 𝐧 = 1 mol
𝑽𝒊 = V
𝑽𝒇 = 2V
Ti = Tf
𝑽𝒇 𝑻𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏
𝑽𝒊 𝑻𝒊
𝑽𝒇 𝑻𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏
𝑽𝒊 𝑻𝒇
𝑽𝒇 𝑽𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏𝟏 ∆𝑺 = 𝒏𝑹𝒍𝒏 +0
𝑽𝒊 𝑽𝒊
𝑽𝒇 𝟐𝑽
∆𝑺 = 𝒏𝑹𝑰𝒏 = 𝟏. 𝟎(𝟖. 𝟑𝟏)𝑰𝒏
𝑽𝒊 𝑽
= 𝟏. 𝟎(𝟖. 𝟑𝟏)𝑰𝒏 𝟐
= 𝟓. 𝟕𝟔 𝑱/𝑲
2. An ideal gas undergoes a reversible isothermal expansion at 77.0 0C,
increasing its volume from 1.30 L to 3.40 L. The entropy change of the gas is
22.0 J/K. How many moles of gas are present?
Solution:
Here, Ti = Tf = 770C = (77 + 273) K = 350 K 𝑽𝒊 = 1.30 L 𝑽𝒇 = 3.40 L
𝑽𝒇 𝑻𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏 ∆𝑺 = 22.0 J/K
𝑽𝒊 𝑻𝒊
𝑽𝒇 𝟑𝟓𝟎
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏
𝑽𝒊 𝟑𝟓𝟎
𝑽𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏 + 𝒏𝑪𝒗 𝒍𝒏 1
𝑽𝒊
𝑽𝒇
∆𝑺 = 𝒏𝑹𝒍𝒏
𝑽𝒊
∆𝑺 𝟐𝟐
𝒏= 𝑽𝒇 = 𝟑.𝟒𝑳 = 2.754 mol
𝑹𝑰𝒏 𝑽 𝟖.𝟑𝟏{𝑰𝒏 𝟏.𝟑𝑳
}
𝒊
Problems for Practice: Homework

3. A 2.50 mol sample of an ideal gas expands reversibly and isothermally at 360
K until its volume is doubled. What is the increase in entropy of the gas?

4. How much energy must be transferred as heat for a reversible isothermal

expansion of an ideal gas at 132 0C if the entropy of the gas increases by 46.0
J/K?
20-1 Second Law of Thermodynamics in terms of Entropy: ∆𝐒 ≥ 𝟎

Reversible process: Let’s check the change in entropy of the enlarged

system consisting of gas and reservoir. We can then calculate separately
the entropy changes from the following equations.

𝒇 𝒅𝑸 𝟏 𝒇 𝑸
∆𝑺 = 𝑺𝒇 − 𝑺𝒊 = ‫𝑻 𝒊׬‬ = ‫𝑸𝒅 𝒊׬‬ = 𝑻 = 𝒄𝒐𝒏𝒔𝒕𝒂𝒏𝒕
𝑻 𝑻

𝑄
∆𝑆𝑔𝑎𝑠 = −
𝑇
𝑄
∆𝑆𝑟𝑒𝑠 = +
𝑇
𝑄 𝑄
∆𝑆 = − + = 0
𝑇 𝑇
“If a process occurs in a closed system, the entropy of the system
increases for irreversible processes (∆𝑺 > 𝟎) and remains constant for
reversible processes(∆𝑺 = 𝟎). It never decreases.”

That is, ∆𝑺 ≥ 𝟎

➢ In the real world almost all processes are irreversible to some extent
because of friction, turbulence, and other factors, so the entropy of real
closed systems undergoing real processes always increases.
Processes in which the system’s entropy remains constant are always
idealizations.
20-2 Entropy in the Real World: Engines

Heat Engine: A heat engine, or more simply, an engine, is a device that extracts
energy from its environment in the form of heat and does useful work. At the heart of
every engine is a working substance.

Carnot Engine: Although an ideal gas does not exist, any real gas approaches
ideal behavior if its density is low enough. Similarly, we can study real engines by
analyzing the behavior of an ideal engine (Carnot Engine).

“An ideal engine where all processes are reversible and no wasteful energy
transfers occur due to, say, friction and turbulence”.