Scribd
Upload
47 views

Sliding Window Specs

Uploaded by

cyrene joy sarasua
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Sliding Window Specs

Uploaded by

cyrene joy sarasua
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

 Windows and Doors

Sliding Window Specification

Frame Hardware
• Window frames are constructed of pattern grade • Standard hardware to be GU-936 H lift and slide as
genuine mahogany (Swietenia macrophylla). manufactured by GU-Hardware with a maximum
• Other suitable wood species for paint, clear and sash weight of 330 lbs. (150kg).
stain grade applications available. • Slide and tilt applications available.
• Standard jamb thickness is 1 3/4” (45mm); • Multiple active and stationary sash
interior sill thickness is 2” (50mm); depth is applications available.
6 5/8” (168mm) or milled to required • Stationary, sliding or retractable screen
project dimensions. options available.
• Window frames are built to +/- 1/16”
(1mm) tolerance. Cladding
• Frames are manufactured with dado joints and are • Aluminum and brass cladding available through
glued and screwed for maximum strength. the Garda system as manufactured by Benaco.
• Finger jointing is not acceptable.
Weather Stripping
Window Sash • Full perimeter elastropen weather stripping with
• Window sashes are constructed of pattern grade welded and overlapping corners.
genuine mahogany (Swietenia macrophylla). Glazing
• Other suitable wood species for paint, clear and • Standard insulated glass units are ¾” (19mm)
stain grade applications available. thick with a ½” (13mm) air space. Other thickness
• Standard sash thickness is 2 3/16” (56mm) with sash available as required.
components laminated for extra stability. • Glass options include but are not limited to:
• Other window sash thickness available as required. tempered, laminated, patterned, wire, spandrel,
• Window sash widths and heights are built to bent, restoration glass and various Low-E options.
+/-1/16” (1mm) tolerance. • Standard glass units are dual sealed with
• Standard window sashes are constructed with polyisobutylene/polysulfide or silicone and are
double mortise and tenon joints. certified by the IGCC to meet a CBA rating.
• Custom true divided lites (TDL) and/or simulated • Glass units are blocked in glazing
divided lites (SDL) in configurations as ordered. channel with neoprene setting blocks
(70 - 90 durometer hardness).
Adhesive • Glass units are wet-glazed with a high
• All wood window components are bonded with performance one part silicone sealant
a water resistant polyvinyl acetate industrial (neutral curing).
adhesive as manufactured by Kleiberit. • Glazing channel is pressure relief vented
and weeped.
Finish • Glass is retained in glazing channel by an interior
• Undercoat and topcoat paint systems as available wood stop nailed or screwed in place.
through Fine Paints of Europe.
• Other glazing systems available as required.
• Stain and semitransparent finish systems as
available through the Sikkens program.
• Other custom finishes available as required.
Sliding Window Details

Unit type: Sliding Window (ext. view)

You might also like