GE Datex Ohmeda Aespire View Anesthesia Machine
GE Datex Ohmeda Aespire View Anesthesia Machine
Anesthesia Machine
The GE Datex Ohmeda Aespire View is compact, durable, with easy to clean surfaces. It comes with
a 12-inch ventilation display that showcases waveforms and alarm indicators. The Aespire offers both
anesthesia gases and ventilation at the same time. The Aespire View uses the GE SmartVent 7900 as
the ventilator system for the anesthesia machine. The ventilation system makes it easy to minimize the
space in the ICU or operating room by combining the Ventilator and the anesthesia machine in one.
The Aespire View also comes standard with GE's advances Breathing System (ABS). This allows the
anesthesia machine to work with low circuit volumes as well as low flow anesthesia.
Features
• Small breathing system volume rapidly
response to fresh gas changes with the
ABS (Advanced Breathing System).
• Fewer parts to help prevent unwanted
disconnects and leaks.
• Bag-to-vent switch works without
electronics in case of power failure.
• Autoclavable and latex-free surfaces.
• Optional EXChange and condenser.
• Extra large work surface area.
• Two storage drawers.
SOMA TECH INTL • 166 HIGHLAND PARK DRIVE • BLOOMFIELD, CT 06002 • USA
PHONE: 1.800.GET.SOMA • WWW.SOMATECHNOLOGY.COM • EMAIL: [email protected]
Revised 6/1/2021
GE Datex-Ohmeda Aespire View
Anesthesia Machine
Specifications
Dimensions Height: 53.5 in (136 cm)
Width: 29.5 in (75 cm)
Depth: 29.1 in (74 cm)
Weight: approximately 300 lbs (136 kg)
Ventilator Tidal Volume 20 to 1500 mL (Volume Control SIMV/PSV and PCV-VG modes)
Range 5 to 1500 mL (Pressure Control Mode)
Ventilator Rate 4 to 100 breaths per minute for PCV-VG, Volume Control and Pressure Control vent
modes
2 to 60 breaths per minute for SIMV/PSV, PSVPro and SIMV vent modes (increments
of 1 breath per minute)
SOMA TECH INTL • 166 HIGHLAND PARK DRIVE • BLOOMFIELD, CT 06002 • USA
PHONE: 1.800.GET.SOMA • WWW.SOMATECHNOLOGY.COM • EMAIL: [email protected]
Revised 6/1/2021