TECHNICAL SPECIFICATIONS

Optional equipment may be shotwn.

AT A GLANCE
„„Onsite track mobility
„„Large feed hopper
„„Hydraulic folding frame
„„Hydraulic raise and lower
„„Abundant service room inside
power-pack
POWER UNIT AND CONTROLS HYDRAULIC FOLDING FRAME „„Adjustable hopper height to
optimize operational efficiency

n Model: ST80T STANDARD FEATURES

n Revision: 9.0 „„External belt alignment points
„„Ground level greasing on all pulley
n Date: December 2016 bearings
„„Engine safety shutdown systems
Engine: Kubota V2203 „„Full safety guarding for pinch points
CONTACT Engine Power: 36.5kw (49hp)
Worldwide Office
OPTIONS
1 McCloskey Road Standard Production: 500tph
Keene, Ontario K9J 0G6 Optional Production: 800tph „„Belt Scale
Canada „„Spray Bar
Working Height: 31’ – 1” (9.47m) „„Chevron Belt
Toll Free: 1-877-876-6635
(1-877-TROMMEL) Transport Height: 13’ – 2” (4.0m) „„Martin Scraper
Phone: 1 (705) 295-4925 „„Impact Idlers Under Hopper
Fax: 1 (705) 295-4777 25,050lbs „„Magnet Material Separator
[email protected] Weight (approx):
(11363kg) „„Anti-Segregation Paddle Wheel
„„Auxiliary Guarding
McCloskey International Ltd reserves the right to make changes to the information and design of this „„Hopper Wing Plates
machine without reservation and notification to the users. Information and specifications are current
at time of print. McCloskey International Ltd assumes no liability resulting from errors or omissions in „„Hopper Wear Plate Liner
this document.
 DIMENSIONS AND WEIGHTS
Working Dimensions:
Length.........................................................................................................................................................................80’ (24.4m)
Width......................................................................................................................................................................8’ – 5” (2.6m)
Height................................................................................................................................................................ 31’ – 1” (9.47m)
Transport Dimensions:
Length................................................................................................................................................................... 51’-4” (15.6m)
Width......................................................................................................................................................................8’ – 5” (2.6m)
Height (approximate).........................................................................................................................................13’ – 2” (4.0m)
Weight (approximate)............................................................................................................................... 25,050lbs (11363kg)

CONVEYOR
Belt width............................................................................................................................................................... 36” (900mm)
Belt length....................................................................................................................................... 80’ (24.38m) drum centers
Belt spec.............................................................................................................Heavy Duty Plain 36 in – 3ply – 3/16 X 1/16
Drive drum diameter............................................................................................................................................ 14” (355mm)
Tail drum diameter............................................................................................................................................... 12” (304mm)
Motor..................................................................................................................................... Eaton 630cc/rev (38.4 cu.in/rev)
Flow rate...............................................................................................................................................96 LPM (25.4 US GPM)
Adjustable speed......................................................................................................................................................................Yes
Drive drum maximum speed.......................................................................................................................................152 rpm
Belt maximum speed...........................................................................................................................548 ft/min (167m/min)

CAPACITIES
Stockpile height................................................................................................................................................ 31’ – 1” (9.47m)
Stockpile capacity............................................................................................................................2035 cu. yds. (1556 cu. m)
Production..................................................................................................................................................500 TPH (standard)
Optional production...............................................................................................................................800 TPH (maximum)

POWER UNIT AND HYDRAULICS

Engine............................................................................................................................................................... Kubota V2203M
Engine power...................................................................................................................................................... 49hp (36.5kW)
Engine speed.................................................................................................................................................................2400 rpm
Flywheel pump........................................................................................................................Permco 40cc (2.48 ci) cast iron
Total system flow................................................................................................................................96 LPM (25.4 US GPM )
Hydraulic tank capacity............................................................................................................................... 440 L (116 US gal)
Diesel tank capacity....................................................................................................................................... 330 L (87 US gal)
Hydraulic oil cooler................................................................................................................................................................Yes

ELECTRICS
Start siren........................................................................................................................................................ Yes (10 sec delay)
Engine shutdowns:
zz Low oil pressure
zz High engine temp
Umbilical controlled tracks....................................................................................................................................................Yes
Radio controlled tracks................................................................................................................................................Standard

TRACKS
Width............................................................................................................................................................1’ – 3.75” (400mm)
Length................................................................................................................................................ 8’ – 1” (2470mm) centers
Height................................................................................................................................................................2’ – 5” (594mm)
Ratio...................................................................................................................................................................................... 141:1
Motor...................................................................................................................................................................30cc (1.8 cu.in)
Speed max............................................................................................................................................... 0.75 mph (1.2 km/hr.)
Flow rate...............................................................................................................................................48 LPM (12.7 US GPM)
Attachment to chassis........................................................................................................................Bolt on for quick change

2 www.mccloskeyinternational.com | McCloskey International Ltd

TECHNICAL SPECIFICATIONS MODEL ST80T All specifications are current as of this printing but are subject to change.
 MAIN COMPONENTS

1 2 3

4 5 6 7

1. Hopper – Receives the feed material and directs material onto the belt
2. Centre Frame – Supports the belt and feed material from the tail frame to the head frame
3. Head Frame – Supports the belt and material as it is discharges from the conveyor
4. Tail Frame – Consists of a hopper unit that feeds material onto the belt
5. Rear Undercarriage – Supports and positions tail frame
6. Power Unit – Encloses the engine, hydraulic tank and machine operational controls
7. Front Undercarriage – Supports and positions conveyor
 WORKING POSITION

4
3

ST80T
H

1
ST80T SPEC DWG
G

ST80T WORKING
H
F

G
F
E

E
D

D
C

C
B

B
A

A
1

4
3

4 www.mccloskeyinternational.com | McCloskey International Ltd

TECHNICAL SPECIFICATIONS MODEL ST80T All specifications are current as of this printing but are subject to change.
 TRANSPORT POSITION

4
3

ST80T
H

1
ST80T SPEC DWG
ST80T TRANSPORT
G
F
E
D
C

MACHINE WEIGHT= 25,500 lbs EST

B
A

4
3

McCloskey International Ltd | www.mccloskeyinternational.com 5

All specifications are current as of this printing but are subject to change. TECHNICAL SPECIFICATIONS MODEL ST80T
 BELT
3ply – 3/16 X 1/16

GROUND LEVEL GREASING

HYDRAULIC DRIVE MOTOR

Dual heavy duty high torque motor

SAFETY
Safety pull cords on both sides of the machine

6 www.mccloskeyinternational.com | McCloskey International Ltd

TECHNICAL SPECIFICATIONS MODEL ST80T All specifications are current as of this printing but are subject to change.
 ROBUST FRAME
Heavy duty lattice frame outperforms folded plate frames of
competitors

WIDE RECEIVING HOPPER

HYDRAULIC TOP FOLD

TRACK SET BACK

Tracks are set back from head pulley to allow full stockpile
capacity

McCloskey International Ltd | www.mccloskeyinternational.com 7

All specifications are current as of this printing but are subject to change. TECHNICAL SPECIFICATIONS MODEL ST80T
CONTACT TECHNICAL SPECIFICATIONS MODEL ST80T // Revision 9.0 // December 2016

Worldwide Office
1 McCloskey Road
Keene, Ontario K9J 0G6
Canada

Toll Free: 1-877-876-6635

(1-877-TROMMEL)
Phone: 1 (705) 295-4925
Fax: 1 (705) 295-4777
[email protected]

European Office
47 Moor Road
Coalisland, Co. Tyrone BT714QB
Northern Ireland

Phone: (+44) 28 8774 0926

Fax: (+44) 28 8774 7242
[email protected]