Occupational Code EEL IAC LEVEL-5-

Ministry of Education
Sector: Economic infrastructure
Sub Sector: Electro technology
OCCUPATION: INDUSTRIAL AUTOMATION AND CONTROL TECHNOLOGY MANAGEMENT LEVEL V THEORY EXAM

1. The following is most likely to be the voltage level used internally in a PLC, excluding the voltage
level that might occur during conditioning in outputs/input channels.
A/ 5V B/ 24V C/110V D/ 240V
2. It refers to the methods that are used to control process variable when manufacturing product.
A/ CUO B/ Process control C/ DAC D/ FMS
3. A device that translates a mechanical signal in to an electrical signal.
A/ Controller B/ Transmitter C/ Sensor D/ Transducer
4. The most widely used code for the transmission of character.
A/ ASCII B/ EBCS C/ SI D/ NEC
5. Pneumatic components used to control the pressure of lowered of pressure media.
A/ Valve B/ Solenoid C/ Relay coil D/ Pressure gauge
6. Valves used to control the passage of air signal by generating cancelling or redirecting signals.
A/ DC Valve B/ AC Valve C/ 3way valve D/ 2 way valve
7. An output device for conversion of supply energy in to useful work the output signal controlled by
the control system and the actuator responds to the control signal via the control element.
A/ Pneumatic B/ Processor C/ Transmitter D/ Transducer
8. It defines the outputs that are needed to achieve the immediate objective of a project organization.
A/ Key result area B/ Objective C/ Performance indicator D/ Valve
9. The available stroke length operation of signal acting cylinder is up to.
A/ 50 mm B/ 100 mm C/ 200 mm D/ 300 mm
10. The following types of motion can be performed by actuators except by;
A/ Linear B/ Rotary C/ Swivel D/ Forward reverse
11. The following are the switching position assumed by the moving parts of a valve after a valve has
been installed in a system except.
A/ Pressure limiting valve B/ Pressure regulating valve C/ Pressure sequencing valve D/ Pressure release valve
1
 Occupational Code EEL IAC LEVEL-5-
12. The following are the importance’s of process control except.
A/ Increase efficiency B/ Insure operation C/ Reduce cost D/ Increase productivity
13. The control loops in the process control industry work requiring the following tasks except.
A/ Measurement B/ Comparison C/ Adjustment D/ Flow
14. The following are process variable except.
A/ Pressure B/ Level C/ Temperature D/ Current
15. The factor that is changed to keep the measured variable at set point is called manipulated variable
the controller flow can be illustrated as.
A/ Manipulated variable -----controller-----process variable
B/ Process variable ---Manipulated variable---controller
C/ controller---- process variable----- Manipulated variable
D/ process variable----- controller----- Manipulated variable
16. The following are primary element sensors except.
A/ Thermocouple B/ Orifice plate C/ RTD D/ Reed
17. A device that receives date from a measurement instruments compares that date.
A/ Transmitter B/ Transducer C/ Controller D/ Actuator
18. The following are major components to create automatic system except.
A/ Process B/ Primary element C/ Final control element D/ Feedback lines
19. In establishing and conducting business relationship one is not opportunity to maintain regulate
contain with customer.
A/ Informal social association B/ Association membership C/ Cooperative promotion
D/ Setting consultation meeting
20. A process to measure how efficiently an organization uses its resource effectively.
A/ Utilization management B/ Personal management C/ Quality management D/ Risk management
21. One of the following is important to improve looking guide lines.
A/ Equalizing the presence guide line from the pervious
B/ Conducting research on employee’s salary
C/ studying the existing situation of service provision by identifying the problem
D/ Maximizing profit of the organizations

2
 Occupational Code EEL IAC LEVEL-5-

Matching
A
1. ______Miniature sensor that is integrated on a B
single chip with a processor
2. ______Special form of microprocessor based A. Transducer
controller that uses a programmable memory to B. Automatic control system
store instructions and to implement functions such C. Digital signal
as logic, sequencing, timing, counting and D. Discrete controller
arithmetic in order to implement machines and E. Smart sensor/ intelligent sensor
processors F. Set point
3. ______Device that converts energy from one form G. PLC
in to others. H. Process variable
4. ______Refers to the process of making a product I. Pneumatic signal
of higher quality than it needs to be meet J. Padding
specification. K. Transmitter
5. ______A condition of the process fluid (liquid, L. Closed control loop
gas) than can change the manufacturing process in M. Error
some way. N. Computer integrated manufacturing
6. ______Control operations in which no human inter O. Feedback loop
versions required. P. Controller
7. ______Signals produced by changing the air Q. Indicator
pressure in a signal pipe in portion to the measured R. Flow control valve
changes in process variables.
8. ______A valve that restricts / throttle the air in a
particular direction to reduce the flow rate of the
air and hence control the signal flow.
9. ______The d/c b/n the measured variable and set
point and can be either positive or negative.
10. ______A device that receive date from
measurement instrument.
11. ______A process lower variable is measure
compared to a set point and action is taken to
correct any deviation from set point.
12. ______A device that converts reading from a
sensor or transducer into a standard signal and
transmits that signal to monitor or controller.
13. ______Human readable device that display
information about the process.
14. ______A discrete level /valves that are combined
in specific ways to represent process variable and
also carry other information.
15. ______A valve for a process variable that is
desired to be maintained.

3
 Occupational Code EEL IAC LEVEL-5-

Answers key choose

1. A 12. C
2. B 13. D
3. D 14. D
4. A 15. C
5. A 16. D
6. D 17. C
7. B 18. D
8. D 19. A
9. A 20. D
10. C 21. C
11. D

Matching
1. E 9. M
2. G 10. P
3. A 11. O
4. J 12. K
5. H 13. Q
6. B 14. C
7. I 15.F
8. R