Scribd
Upload
9 views

Assignment 1 DC Circuits

Uploaded by

Sohan Chandra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Assignment 1 DC Circuits

Uploaded by

Sohan Chandra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

School of Electronics Engineering (SENSE)

ECE1002 Fundamentals of Electrical & Electronics Engineering

(Fall Semester 2024-25)

Assignment 1

1) To find monthly bill of your home for the following appliances (Consider 30
days)
a) 5 fans for 12 hours daily (fan rating 80 W)
b) 4 lamps for 14 hours daily (lamp rating 20 W)
c) 2 LCD TV for 5 hours daily (LCD rating 100 W)
d) 2 microwave oven for 4 hours daily (500 W)
The charges per kWh are Rs. 13/-

2) Find the equivalent resistance for the circuit shown in figure


3) Find equivalent resistance for the circuit shown in figure

4) Find the equivalent resistance for the circuit shown in figure

5) Find the equivalent resistance between the terminals a and b


6) Find the equivalent resistance between the terminals a and b

7) Find the equivalent resistance between the terminals a and b

8) Determine the equivalent resistance of each of the circuit shown below


9) Find equivalent resistance for the circuit shown in figure

10) Find the equivalent resistance for the circuit shown in figure

11) For the circuit shown in figure find the voltages V1 and V2
12) Find current and voltages for the circuit shown in figure

13) Find current and voltages for the circuit shown in figure

14) Find the value of current I using mesh analysis


15) Use KVL to obtain a numerical value for the current labeled i in each of the
circuit shown below

16) Using Mesh analysis, determine the two mesh currents labelled in the
circuit shown below

17) Obtain the node voltages for the circuit shown in Figure
18) For the circuit shown in Figure find V1 and V2

19) Using Superposition theorem find V0 in the circuit shown in Figure

20) Using Superposition theorem find V0 in the circuit shown in Figure


21) Determine V0 in the circuit shown in Figure using Superposition
principle.

22) Use superposition theorem to find i0 in the circuit shown in Figure

23) For the circuit shown in Figure use source transformation to find i
24) Using Thevenin’s theorem find the equivalent circuit to the left of the
terminals for the circuit shown in Figure, then find I

25) Apply Thevenin’s theorem to find V0 for the circuit shown in Figure

26) Find the value of RL for maximum power transfer for the circuit
shown in Figure. Also find the maximum power.
27) Find the maximum power that can be delivered to the resistor R for
the circuit shown in Figure

You might also like