0% found this document useful (0 votes)
30 views6 pages

Media External Downloads 1000006960

To read

Uploaded by

metlougamar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
30 views6 pages

Media External Downloads 1000006960

To read

Uploaded by

metlougamar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

WF70A7SZAHLNN0# 第 1 頁,共 6 頁

Winstar Display Co., LTD


華凌光電股份有限公司
WEB: https://www.winstar.com.tw E-mail: [email protected]

SPECIFICATION

MODULE NO.: WF70A7SZAHLNN0#


AHLNN0#
General Specifications
Item Dimension Unit

Size 7.0 inch

Dot Matrix 1024 x RGB x 600(TFT) dots

Module dimension 169.9(W) x 103.4(H) x 5.6(D) mm

Active area 154.2144 x 85.92 mm

Dot pitch 0.1506 x 0.1432 mm

LCD type TFT, Normally White, Transmissive


issive

View Direction 12 o’clock

Gray Scale Inversion Direction 6 o’clock

Aspect Ratio 16:9

Control IC --

Driver IC EK79001HE + EK73215BCGA

Backlight Type LED, Normally White

Touch Panel Without Touch Panel

Interface LVDS

Surface Anti-Glare
*Color
or tone slight changed by temperature and driving voltage.

WF70A7SZAHLNN0# 第 2 頁,共 6 頁
Absolute Maximum Ratings
Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 - +70 ℃

Storage Temperature TST -30 - +80 ℃

Electrical Characteristics
1. Typical Operation Conditions
Values
Item Symbol Unit
Min. Typ. Max.
DVDD 3.0 3.3 3.6 V
AVDD 9.4 9.6 9.8 V
Power voltage
VGH 17 18 19 V
VGL -6.6 -6.0 -5.4 V
Input signal voltage VCOM 3.1 3.3 3.6 V
Input logic high voltage VIH 0.7 DVDD - DVDD V
Input logic low voltage VIL 0 - 0.3 DVDD V

2. Current Consumption

Values
Item Symbol Unit
Min. Typ. Max.
IGH - 0.2 1.0 mA
IGL - 0.2 1.0 mA
Current for Driver
IDVDD - 4.0 10 mA
IAVDD - 20 50 mA

3. Backlight Driving Conditions

Values
Item Symbol Unit
Min. Typ. Max.
Voltage for LED backlight VL 16.8 19.2 21.0 V
Current for LED backlight IL -- 320 -- mA
LED life time - - 50,000 - Hr

WF70A7SZAHLNN0# 第 3 頁,共 6 頁
Interface
1. LCM PIN Definition
FPC Connector is used for the module electronics interface. The recommended model is
FH12A-40S-0.5SH manufactured by Hirose.
Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Digital circuit
3 VDD P Digital circuit
4 NC --- No connection
5 Reset I Global reset pin
Standby mode, Normally pulled high
STBYB = “1”, normal operation
6 STBYB I STBYB = “0”, timing controller, source driver will turn off,
all output are High-Z
7 GND P Ground
8 RXIN0- I Negative LVDS differential data input
9 RXIN0+ I Positive LVDS differential data input
10 GND P Ground
11 RXIN1- I Negative LVDS differential data input
12 RXIN1+ I Positive LVDS differential data input
13 GND P Ground
14 RXIN2- I Negative LVDS differential data input
15 RXIN2+ I Positive LVDS differential data input
16 GND P Ground
17 RXCLKIN- I Negative LVDS differential clock input
18 RXCLKIN+ I Positive LVDS differential clock input
19 GND P Ground
20 RXIN3- I Negative LVDS differential data input
21 RXIN3+ I Positive LVDS differential data input
22 GND P Ground
23 NC --- No connection
24 NC --- No connection

WF70A7SZAHLNN0# 第 4 頁,共 6 頁
25 GND P Ground
26 NC --- No connection
27 DIMO O Backlight CABC controller signal output

6bit/8bit mode select


28 SELB I
H:6bit / L:8bit

29 AVDD P Power for Analog Circuit


30 GND P Ground
31 NC --- No connection
32 NC --- No connection
33 L/R I Horizontal inversion
34 U/D I Vertical inversion
35 VGL P Negative power for TFT
36 GND P Ground
37 GND P Ground
38 VGH P Positive power for TFT
39 NC --- No connection
40 NC --- No connection

I:input ,O:output,P:powe

WF70A7SZAHLNN0# 第 5 頁,共 6 頁
Contour Drawing
PIN NO SYMBOL
1 VCOM
2 VDD
TFT_Outline 169.90±0.5
3 VDD
4.70 TFT_VA 157.20
4 NC
5.31 Pol 156.08
6.24 TFT_AA 154.2144 5.60±0.5
5 RESET
6 STBYB
4.57

6.29
5.01

7 GND
8 RXIN0-
Pull tape
9 RXIN0+
10 GND
11 RXIN1-
12 RXIN1+
1024(RGB) X600
TFT Outline 103.40±0.5

13 GND
TFT_VA 89.43

TFT_AA 85.92

14 RXIN2-
Pol 88.49

15 RXIN2+
16 GND
17 RXCLKIN-
18 RXCLKIN+
19 GND
BHSR-02VS-01 20 RXIN3-
Red 21 RXIN3+
22 GND
(18.25)

White
Black tape 23 NC
100.0±5.0
24 NC
38.55±0.5

Component
Area
1.65 MAX
25 GND

5.50
9.00 component height
4.00

PIN NO SYMBOL
Contact side Stiffener 26 NC
1 A
27 DIMO
2 K
0.30±0.05 29.50 28 SELB
W=0.35±0.05
P0.5*39=19.50±0.1 29 AVDD
69.65±0.5 20.50±0.1 30 GND
31 NC
32 NC
33 L/R
34 U/D
35 VGL
36 GND
37 GND
38 VGH
39 NC
40 NC

The non-specified tolerance of dimension is 0.3mm.

WF70A7SZAHLNN0# 第 6 頁,共 6 頁

You might also like