NetKey ® NK6™ Category 6 U/UTP

Copper Cable – Europe DATA SHEET

Category 6 cable shall meet the ISO 11801

Class E and ANSI/TIA-568-C.2 Category 6
NetKey ® Network Components
channel standards. The conductors shall be 24
AWG insulated with polyethylene. The copper
conductors shall be twisted in pairs, separated by NetKey ® UTP Copper Cable
a cross divider and covered by a LSFRZH jacket. LSFRZH: NUY6C04**-CE
NetKey Category 6 UTP Jack Module
®

Punchdown: NK688MIW*
NetKey ® Category 6 UTP Patch
Cords – CM
technical information Foot lengths: NK6PC3^Y
Meter lengths: NK6PC1M^^Y
Electrical Certified channel performance in a 4-connector configuration up to
NetKey ® Category 6 Punchdown
performance: 100 meters and meets ISO 11801 Class E and ANSI/TIA-568-C.2
Patch Panels
Category 6 standards at swept frequencies up to 250MHz.
12-port: NK6PPG12WY
Conductors/ 24 AWG solid copper insulated with polyolefin 24-port, 1 RU: NK6PPG24Y
insulators: 48-port, 2 RU: NK6PPG48Y
NetKey ® Category 6 All Molded
Flame rating: EN 50575: Euroclass Cca-s1a-d1-a1 Punchdown Patch Panels
PoE compliance: Meets IEEE 802.3at and IEEE 802.3bt for PoE applications 24-port, 1 RU: NK6PP24P
48-port, 2 RU: NK6PP48P
Installation tension: 110 N (25 lbf ) NetKey ® Flush Mount Modular
Temperature rating: -20ºC to 75ºC (-4ºF to 167ºF) during installation Patch Panels
Angled, 24-port,
Insulation diameter: 0.89 to 0.99mm (0.035 to 0.039 inch) 1 RU: NKPPA24FMY
Cable jacket: LSFRZH Angled, 48-port,
2 RU: NKPPA48FMY
Cable diameter: 5.9mm (0.235 inch) nominal Flat, 24-port, 1 RU: NKPP24FMY
Flat, 48-port, 2 RU: NKPP48FMY
Cable weight: 12kg/305m (26 lbs./1000 ft.)
NetKey ® Category 6 All Molded
Packaging: 305m (1000 ft.) easy payout carton Modular Patch Panels
24-port, 1 RU: NKPP24P
48-port, 2 RU: NKPP48P
Termination and Cable Prep Tools
key features and benefits
JackRapid ™
Third party tested Cable has been tested as part of the NetKey® Category 6 U/UTP Termination Tool: JR-PAN-2
Copper Cabling System by an independent laboratory and complies Conductor
with the electrical channel requirements of the following standards: snipping tool: CWST
Conductor
ISO 11801 Class E and ANSI/TIA-568-C.2 Category 6 standards stripping tool: CJAST
Easy payout carton Ensures proper performance and provides quick installation
*For standard colors other than Off White (IW), replace
Descending length Easy identification of remaining cable reduces installation time and suffix with EI (Electrical Ivory), IG (International Gray),
WH (White), BL (Black), BU (Blue), RD (Red), YL
cable markings cable scrap (Yellow), GR (Green), or VL (Violet). Add -Q to end of
part number for 25 pack convenience package.
Robust design Cross divider separates twisted pairs for robust cable ** Part number available in WH (White). For additional
colors, please contact Panduit Customer Service.
performance ^For standard foot lengths other than 3 feet, replace
the 3 in the part number with 5, 7, 10, 14 or 20. For
standard colors other than Off White, add suffix BU
(Blue), RD (Red), YL (Yellow) or GR (Green) before
the Y at the end of the part number. For example, the
part number for a blue, Category 6, 5-foot patch cord
is NK6PC5BUY.

applications ^^For standard meter lengths other than 1 meter,

replace the 1 in the part number with 2, 3, 4 or 5. For
standard colors others than Off White, add suffix BU
NK6™ U/UTP Copper Cable is a component of the Panduit NK6™ U/UTP Copper Cabling (Blue), RD (Red), YL (Yellow) or GR (Green) before Y
at the end of the part number. For example, the part
System. This end-to-end system provides Gigabit Ethernet performance with usable number for a blue, Category 6, 5-meter patch cord is
NK6PC5MBUY.
bandwidth beyond 250MHz. With certified performance the ISO 11801 Class E and ANSI/
Fluke JackRapid™ Termination Tool available through
TIA-568-C.2 Category 6 standards, this system will support the following applications: distribution. To locate the local office, visit www.
flukenetworks.com/contact. JackRapid™ is a
trademark of Fluke Networks.
* Ethernet 10BASE-T
*100BASE-T (Fast Ethernet)
*1000BASE-T (Gigabit Ethernet)

w w w . p an d uit .com
 NetKey NK6™ Category 6 U/UTP Copper Cable – Europe
®

additional specifications
Mechanical Test
Ultimate Breaking Strength >400 N (90 lbf.)
Minimum Bend Radius 4 x cable diameter
Electrical Test
Nominal Velocity of Propagation (NVP) 65%
Operating Voltage, Maximum 80V

cable construction

Jacket

Conductor Wire
Conductor Insulator

Cross Divider

WORLDWIDE SUBSIDIARIES AND SALES OFFICES

PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
[email protected] [email protected] [email protected] [email protected] [email protected]
Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020

For a copy of Panduit product warranties, log on to www.panduit.com/warranty

For more information

Visit us at www.panduit.com ©2018 Panduit Corp.
ALL RIGHTS RESERVED.
Contact Customer Service by email: [email protected] NKDS62--WW-UKE
or by phone: 800.777.3300 4/2018