Bee302 Electrical Measurements Instrumentation
Bee302 Electrical Measurements Instrumentation
BTECH
(SEM III) THEORY EXAMINATION 2023-24
ELECTRICAL MEASUREMENTS & INSTRUMENTATION
TIME: 3HRS M.MARKS: 70
Note: 1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
1. Attempt all questions in brief. 2 x 7 = 14
Q no. Question Marks CO
a. Differentiate between ‘accuracy ‘and ‘precision’. 2 CO1
b. What are the different types of errors in a measurement? 2 CO1
c. What is creeping in energy meters? 2 CO2
d. What conditions must be satisfied to make an ac bridge balanced? 2 CO3
e. Define the Transformation ratio and nominal ratio for CT and PT. 2 CO4
f. Differentiate between active and passive transducers 2 CO5
g. Differentiate between primary and secondary transducers. 2 CO5
SECTION B
2. Attempt any three of the following: 7 x 3 = 21
90
Q no. Question Marks CO
2
13
a. Explain the principle, construction and operation of attraction-type 7 CO1
_2
2.
P2
deflecting torque.
24
b. Explain the two-wattmeter method in three-phase power measurement 7 CO2
4D
5.
for a star-connected load. Discuss how the method helps determine the
.5
P2
inductance. Derive the equation for balance and draw the phasor
|1
diagram.
0
d. A current transformer of turns ratio 1:199 is rated as 1000/5, 25 VA. The 7 CO4
2
core loss and magnetizing components of the primary current are 4A and
0:
7A under rated conditions. Determine the phase angle and ratio errors
:4
for the rated burden and rated secondary current of 0.8 p.f lagging.
13
disadvantages.
-2
SECTION C
03
a. Explain the construction and working of PMMC instruments. Derive the 7 CO1
equation for deflection torque.
b. The solution for the unknown resistance for a Wheatstone bridge is : 7 CO1
𝐑𝟐𝐑𝟑
𝐑𝐱
𝐑𝟏
Where R1 = 100 Ω ± 0.5%, R2 = 1000 Ω ± 0.5% and R3 = 800 Ω ±
0.5%. Determine the magnitude of the unknown resistance and the
limiting error in percent and in ohm for the unknown resistance Rx.
1|Page
QP24DP2_290 | 19-03-2024 13:40:20 | 117.55.242.132
Printed Page: 2 of 2
Subject Code: BEE302
0Roll No: 0 0 0 0 0 0 0 0 0 0 0 0 0
BTECH
(SEM III) THEORY EXAMINATION 2023-24
ELECTRICAL MEASUREMENTS & INSTRUMENTATION
TIME: 3HRS M.MARKS: 70
2
13
6. Attempt any one part of the following: 7x1=7
_2
2.
P2
a. With the help of suitable block diagram explain different types of wave 7 CO4
24
analyzer and their applications..
4D
5.
b. Draw the equivalent circuit and phasor diagram of the current 7 CO4
.5
P2
Poisson’s ratio.
:4
2|Page
QP24DP2_290 | 19-03-2024 13:40:20 | 117.55.242.132