Scribd
Upload
22 views2 pages

Crushing Process of Hard Materials

Uploaded by

BINBUSH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views2 pages

Crushing Process of Hard Materials

Uploaded by

BINBUSH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Crushing Process of hard Materials

1 Crushing of hard Materials


These processes are used to reduce a material from its original size to a
output size.
The main physical size reduction processes are:
shattering (breaking),
squeezing,
grinding.
Shattering (breaking) is used, as a rule, to reduce materials with grain si
size. In squeezing and grinding processes, materials already reduced to
50 mm are reduced/ground to extremely small grains. The boundaries b
and grinding are fluid.
1.2 Machines used for crushing hard materials
Machines used for crushing hard materials can take materials with edge
2500 mm and reduce them to sizes of a few hundredths of a millimeter in
processes. In these machines - crushers, mills and presses - moderately
hard stones, other minerals, coal and sands are processed. Depending
and on the desired end product, the following machines may be used:
- Jaw crushers
- Cone crushers
- Hammer crushers
- Roller grinding mills
- Roller presses (cylinder crushers) - Tube mills
Machines used for crushing hard materials must be characterized by AH
operational reliability, and they must be easy to maintain. As a leading r
manufacturer, FAG are making their contribution to meeting these require
1.2.1 Jaw crushers
1.2.1.1 Principle of operation of double toggle jaw crushers
The jaw crusher was invented in the middle of the 19th century, by an Am
Blake. It is also referred to as double toggle jaw crusher.
Double toggle jaw crushers are used as coarse crushers and fine crusher
of operation is intermittent. On a horizontal shaft with an eccentric center
pitman, which actuates the swing jaw through a double toggle lever system

You might also like