Fofys' Puppies

Siberian Husky
Snow

Por Thamy @lojafofys

Hello,
Thank you for appreciating my work! I am very happy that you
bought this pattern to be able to crochet the cutest Husky in the
world!

I look forward to seeing your puppy ready! So I can do that,

whenever you post on your social network tag me and use the
hashtags #puppiesfofys and #fofyspattern.

Important Information!
This pattern is intended for those who already know the basic
crochet stitches, so there are parts that are not explained in detail.
However, you can see some crochet tips on my Instagram and
YouTube channel.

This pattern is for individual use. It is the result of many tests and
hours of work on my part and of those who helped me in any way
possible. If you value art and craftsmanship, I ask that you do not
share this PDF file or its contents with others.

Please respect the work of others so that your work is also

appreciated.

Click on the icon

Hugs, kisses and happy crocheting!!

Thamy
 Materials Abbreviations
US terms

DK/Light worsted acrylic yarn (Yarn mc - magic circle

for a 3,5-4,5mm hook) in White and ch - chain
Dark Grey. slst - slip stitch
DK/Light worsted acrylic and cotton sc - single crochet
mix (yarn for a 3.5 to 4.5 mm hook) in dc - double crochet
light blue. tc - treble crochet
Polyfill inc - increase
Safety Eyes - 12mm dec - decrease
Safety Nose - 12 mm
3 mm crochet hook
You can make your puppy
Black embroidery thread for mouth
with the acrylic yarn you
Stitch marker, scissors, tapestry chose, as long as you adapt
needle, pins. the hook size and other
materials necessary.

16cm
The final size may
vary depending on
the materials used
and tension of your
stitches.

@lojafofys
 Let's get started?
Work in a spiral, using a stitch marker in the first stitch of each round.

* Add stuffing as you go.

Front legs (2x)

1. 6sc in mc (6)
2. 6inc (12)
3. (1sc, 1inc) x 4, 4sc (16)
4. 1sc, 3dec, 9sc (13)
5. 1sc, 1dec, 10sc (12)
6-15. 12sc (12)
Cut the yarn and fasten off with a slst.
Fill the leg firmly from the bottom up to half way, and then use less
filling in the second half.

Hind legs (2x)

The red text means you
1. 6sc in mc (6)
should change to dark
2. 6inc (12) grey yarn.
3. (1sc, 1inc) x 4, 4sc (16)
4. 1sc, 3dec, 9sc (13)
5. 1sc, 1dec, 6sc, 4sc (12)
6. (1sc, 1inc) x 6 (18)
7. (1sc, 1inc, 1sc) x 6 (24)
8-9. 24sc (24)
10. (1sc, 1dec) x 8 (16)
11. (1sc, 1dec, 1sc) x 4 (12)
12. 2dec, 8sc (10)
Cut the yarn leaving a 20cm tail for sewing and close the hole by
doing an inverse magic ring (sew through the front loops and pull
tightly to close the gap).
4
@lojafofys
@lojafofys
Body
1.6sc in mc (6)
2. 6inc (12)
3. (1sc, 1inc) x 6 (18)
4. (1sc, 1inc, 1sc) x 6 (24)
5. (3sc, 1inc) x 2, (3sc, 1inc) x 2, (3sc, 1inc) x 2 (30)
6. 2sc, 1inc, 4sc, 1inc, 2sc, 2sc, 1inc, 4sc, 1inc, 2sc, 2sc, 1inc, 4sc,
1inc, 2sc (36)
7. 12sc, 12sc, 12sc (36)
8. 9sc, 1dec, 1sc, 1sc, 1inc, 10sc 12sc (36)
9. 11sc, 1sc, 1dec, 3sc, 1inc, 6sc, 12sc (36)
10. 11sc, 13sc, 12sc (36)
11. 11sc, 1sc, 1dec, 3sc, 1inc, 6sc, 12sc (36)
12. 11sc, 13sc, 12sc (36)
13. 9sc, 1inc, 1sc, 1sc, 1dec, 10sc, 12sc (36)
14. 12sc, 6sc, 1inc, 5sc, 10sc, 1dec (36)
15-16. 12sc, 13sc, 11sc (36)
17. 12sc, 6sc (leg+body), 1sc (body only), 6sc (leg+body), 11sc (36)

On round 17 we will join the front legs to the body. Start by making 12 sc in dark
grey, then change to white. Insert the hook in the first stitch of row 16 of the leg
(where you did the slst) and the next stitch of row 17 of the body and make 1 sc.
Make 6sc joining the first leg to the body, make 1 sc in the body only, and 6 sc to
join the second leg to the body. Change colours and continue making single
crochet stitches until the end of the round.
https://youtu.be/oNfC2nexFU4

@lojafofys
body continued
18. 12sc, 6sc (leg),1sc, 6sc (leg), 11sc (36)
19. 13sc, 5sc, 1sc, 5sc, 12sc (36)
20. 14sc, 3sc, 4sc, 3sc, 12sc (36)
21. (1dec, 4sc)x2, 1dec, 1sc, 1sc, 2sc, 1dec, 2sc, 1sc, 1sc, (1dec, 4sc)x2 (30)
22. (2sc, 1dec) x3, 2sc, 3sc, 1sc, (2sc, 1dec) x3 (24)
23. 11sc, 4sc, 9sc (24)
24. (2sc, 1dec) x2, 2sc, 1dec, 2sc, 1dec, (2sc, 1dec) x2 (18)
25. 8sc, 4sc, 6sc (18)

Fasten off and cut leaving 20cm for sewing.

Tail
* Don't stuff the tail.
1. 6sc in mc (6)
2-9. 6sc(6)

Fasten off and cut leaving 15cm for sewing.

You can add rounds to make the tail longer.

@lojafofys
Head
1. 6sc in mc (6)
2. 6inc (12)
3. (1sc, 1inc) x 6 (18) Place the nose between
4-5. 18sc (18) rounds 2 and 3.
Place the eyes between
6. (1sc, 1inc, 1sc) x 6 (24)
rounds 11 and 12, leaving
7-8. 24sc (24) 10 sc in between (the left
9. (3sc, 1inc) x 6 (30) eye is located right after
10. 30sc (30) the first increase).
11. 9sc, (1sc, 1inc, 1sc) x4, 9sc (34)
12. 9sc, (3sc, 1inc) x4, 9sc (38)
13. 9sc, 2sc, 1inc, 1sc, 2sc, 1sc, 1inc, 4sc, 1inc, 1sc, 2sc, 1sc, 1inc, 11sc
(42)
14. 13sc, 4sc, 8sc, 4sc, 13sc (42)
15. 12sc, 6pb, 1sc, 1sc (in the row below), 2sc, 1sc (in the row below), 1sc,
6sc, 12sc (42)
16. 20sc, 2sc, 20sc (42)
17. 21sc, 1sc, 20sc (42)
18. 42sc (42)
19. (5sc, 1dec) x6 (36)
20. 36sc (36)
21. (2sc, 1dec, 2sc) x6 (30)
22. (3sc, 1dec) x6 (24)
23. (1sc, 1dec, 1sc) x6 (18)
24. (1sc, 1dec) x 6 (12)
25. 6dec (6)

Fasten off, cut and with the yarn tail close the hole
with an inverse mc.
With embroidery floss, embroider the mouth.

@lojafofys
 For the ears we will work flat, using a ch 1 and turning at the end of each row.

All 4 parts are the same, two are white (the inside of the ear) and two are dark
grey (the outer part).
Tip: When you finish the black triangle, don't cut the yarn! We will use it to join
the inner and outer parts.

Inner part (2x)

1. 1sc in mc(1)
2. 1inc (2)
3. 2inc(4)
4. 1sc, 2inc, 1sc (6)
5-6. 6sc (6)
7. 2sc, 1dec, 2sc (5)
Fasten off and cut.

Outer part (2x)

1. 1sc in mc (1)
2. 1inc (2)
3. 2inc(4)
4. 1sc, 2inc, 1sc (6)
5-6. 6sc (6)
7. 2sc, 1dec, 2sc (5)
Do not cut! Place the grey part behind the white part and single crochet
around to join both parts.

8
@lojafofys
@lojafofys
Bone
I used "Balloon Amigo" yarn for this part, but you can use whatever you prefer.

1. 6sc in mc (6)
2. 6inc (12)
3. (1sc, 1inc)x6 (18)
4-5. 18sc (18)
Fasten off and cut yarn, leaving 10cm to sew.
Make another one but don't cut the yarn, this part will be joined to the first
one.
6. 36sc (36)
7. (2sc, 1dec, 2sc)x6 (30)
8. 30sc (30)
With the tail left in the first half, sew closed the tiny hole that was formed
when you joined the parts.

9. (3sc, 1dec)x6 (24)

10. 24sc (24)
11. (1sc, 1dec, 1sc)x6 (18)
12-17. 18sc (18)
Cut and fasten off.
Repeat rows 1-17 again, and cut leaving 20cm to sew both halves of the
bone together.

Ball
1. 6sc in mc (6)
2. 6inc (12) Use a variegated
yarn to make the
3. (1sc, 1inc) x 6 (18) ball.

4. 18sc (18)
5. (1sc, 1dec) x 6 (12)
6. 6dec (6)
Cut the yarn leaving a tail to close the hole. 9
@lojafofys
@lojafofys
 Assembly
Before sewing all parts together,
attach them with pins to make sure
everything is in the right place and
only then sew it together.

Sew the ears between rows 17 and 18 of the head (using

the eyes as a guide).
With the same yarn used for the body, add a few stitches
attaching the front legs to the tummy of the dog, this way
he will remain in a sitting pose.
Sew the back legs to the body, making sure they allow the
dog to sit balanced.
Sew the tail to the bottom of the back.

Sew the head onto the body (tip: remove the pins as you
sew).
With the darning needle, embroider the mouth.

All done!
You have finished your Husky
puppy and I hope it has been a fun
project!
I look forward to see how it turned
out, please don't forget to tag me
using the hashtags #fofyspuppies
and #fofyspattern.

10
And now a Fofys style
photoshoot!

#fofyspuppies
#fofyspattern

11