Engine

Rated Power
Net Power
Cummins 6LTAA8.9
179 kW (240 hp / 243 ps) @ 2,200 rpm
168 kW (225 hp / 228 ps) @ 2,200 rpm
862H
Operating Weight
Standard Bucket Size
20,600 kg
4.0 m3 WHEEL
LOADER
Max Breakout Force 175 kN
Standard Dump Clearance 3,533 mm

T O U GH W O R LD. T O UGH EQ U IPM E N T.

862H
SPECIFICATIONS >>>
ENGINE LOADER ARM PERFORMANCE with Standard Bucket 4.0 m3
Emission Regulation Tier 2 / Stage II Tipping Load - Straight (ISO 14397-1:2007) 15,200 kg
Make Cummins Tipping Load - Full Turn (ISO 14397-1:2007) 12,850 kg
Model 6LTAA8.9 Bucket Breakout Force 175 kN
Rated Power 179 kW (240 hp / 243 ps) @ 2,200 rpm A Maximum Hinge Pin Height 4,530 mm
Net Power 168 kW (225 hp / 228 ps) @ 2,200 rpm B Dump Clearance at Full Height Discharge 3,533 mm
Peak Torque 1,180 N·m @ 1,400 rpm C Dump Reach at Full Height Discharge 1,025 mm
Displacement 8.9 L D Maximum Digging Depth, Bucket Level 122 mm
Number of Cylinder 6 S1 Rollback at Ground Level 44.3°
Aspiration Turbocharged ﹠ Air-to-air intercooled S2 Bucket Rollback at Carry 49°
S3 Bucket Rollback at Maximum Height 62.4°
TRANSMISSION
S4 Maximum Dump Angle at Full Height 45°
Transmission Type Countershaft, power shift
Torque Converter Single stage, three elements BUCKET PERFORMANCE
Maximum Travel Speed, fwd 35 km/h Reference Bucket 3.0-6.0 m3
Maximum Travel Speed, rev 25.9 /h
Number of Speed, fwd 4 DIMENSIONS
Number of Speed, Rev 3 E Ground Clearance 410 mm
G Wheelbase 3,550 mm
AXLES H Cab Height 3,500 mm
Differential Front Type Conventional J Wheel Tread 2,280 mm
Differential Rear Type Conventional K Width Over Tires 2,880 mm
Axle Oscillation ±10° L Length with Bucket Down 8,919 mm
M Turn Angle, Either Side 38°
STEERING
P Rear Angle of Departure 27°
Steering Configuration Articulated
R1 Turning Radius, Bucket Carry 7,530 mm
Steering Relief Pressure 21 MPa
R2 Turning Radius, Outside of Tire 6,600 mm
BRAKES W Width Over Bucket 3,216 mm
Service Brake Type Caliper discs brake
Service Brake Actuation Air over hydraulic TIRES
Parking Brake Type Drum 23.5 - 25 - 24PR/TT
Tire Size
Parking Brake Actuation Mechanical L3

HYDRAULIC SYSTEM OPERATING WEIGHTS

Main Pump Type Gear Operating Weight 20,600 kg
Main Relief Pressure 24 MPa
Raise 5.2 s SERVICE CAPACITY
Dump Time 1.1 s Fuel Tank 330 L
Float Down Time 3s Engine Oil 28 L
Fastest Total Cycle Time 9.3 s Cooling System 35 L
Hydraulic System 273 L
Transmission and Torque Converter 35 L
Axles, Each 43 L

Guangxi Liugong Machinery Co., Ltd. 06/2021 Designed by LiuGong

No. 1 Liutai Road, Liuzhou, Guangxi 545007, PR China Replace the previous versions of 05/2020
T: +86 772 3886124 E: [email protected]
www.liugong.com
Specifications and designs are subject to change without notice. Machines shown may include optional equipment. LiuGong standard and optional equipment may vary from region to region.
Please consult your LiuGong dealer for information specific to your area. Engine power kW is converted to horsepower (1 kW=1.3596 ps and 1 kW=1.3410 hp) in this file.