(Integrated Building BSR 2022 Rajasthan)

INPUTS
BASIC RATES OF MECHINERY
CODE NAME OF MECHINERY UNIT
1 Hire charges of Coaltar Boiler 900 to 1400 litres Day
2 Hire charges of Concrete Mixer 0.14 cubic metre Day
3 Hire charges of Diesel Road Roller - 8 to 10 tonne Day
4 Production cost of concrete by batch mix plant. cum
5 Hire charges of Diesel Truck - 9 tonne Day
6 Hire charges of Spraying machine including electric charges Day
7 Hire charges of Coaltar Sprayer Day
8 Hire charges of Barber green, drying, mixing and Asphalt Plant, with accessories, Day
capacity 30/45 tonne
9 Pumping charges of concrete including Hire charges of pump, piping work & accessories Cum
etc.
10 Hire charges of Derrickmonkey rope Day
11 Hire charges of Pumpset of capacity 4000 litres/hour. Day
12 Vibrator(Needle type 40mm) Day
13 Machine for rubbing of floors with driver & car Day
14 Front end loader Day
16 Mastic Cooker Day
17 Hire and running charges of tipper Day
18 Hire and running charges of loader. Day
19 Hand Grinder For mirror polish Day
20 Hydraulic Excavator (3D) with driver and fuel. Day
21 Pin vibrator Day
22 Surface Vibrator Day
24 Hire and running charges of hydraulic piling rig with power unit etc. including complete per day
accessories and shifting at site.
25 Hire and running charges of light crane. per day
26 Hire and running charges of bentonite pump. per day
27 Hire and running charges of vibrating pile driving hammer complete with power unit and per day
accessories .
28 Hire and running charges of crane 20 tonne capacity. per day
29 Carriage of concrete by transit mixer. km/ cum
30 Generator 250 KVA. per day
33 Paint applicator. per day
37 Mobile crane. per day
38 Tractor with ripper attachment. per day
39 Tractor with trolley . per day
40 Air compressor 250 cfm with two leads for pneumatic cutters/ hammers. day
41 Joint cutting machine with 2-3 blades per day
42 C.C .batch mix plant. day
43 Road sweeper day
45 Slip form paver with sensor. day
46 Water tanker 5000 litr capacity. day
47 Concrete joint cutting machine. day
48 Texturing machine. day
49 Production Cost of concrete for weigh batcher, operator charges & other charges for cum
designing
50 Water tanker 6 kL capacity hour

input (Machinery) [1]

 (Integrated Building BSR 2022 Rajasthan)

INPUTS
SIC RATES OF MECHINERY
RATE
870.00
1300.00
1730.00
500.00
1500.00
450.00
400.00
8900.00

150.00

635.00
1200.00
800.00
1000.00
7600.00
635.00
1390.00
1150.00
400.00
8000.00
800.00
800.00
37000.00

2900.00
5775.00
37000.00

6350.00
32.00
11500.00
650.00
6350.00
1270.00
1300.00
1730.00
1000.00
50000.00
700.00
12700.00
1200.00
1200.00
1000.00
60.00

300.00

input (Machinery) [2]

 (Integrated Building BSR 2022 Rajasthan)

INPUTS
BASIC RATES OF LABOUR
CODE LABOUR UNIT
100 Bandhani Day
101 Bhisti Day
102 Blacksmith 1st class Day
103 Blacksmith 2nd class Day
111 Carpenter 1st class Day
112 Carpenter 2nd class Day
113 Chowkidar Day
114 Beldar Day
115 Coolie Day
116 Fitter (grade 1) Day
117 Assistant Fitter or 2nd class Fitter Day
119 Glazier Day
122 Mason (for plaster of paris work) 1st class Day
123 Mason (brick layer) 1st class Day
124 Mason (brick layer) 2nd class Day
125 Mason (for plain stone work) 2nd class) Day
126 Mason (for ornamental stone work) 1st class Day
127 Driver (for Road Roller, Concrete Mixer, Truck etc.) Day
128 Mate Day
130 Mistry Day
131 Painter Day
132 Rock Excavator Day
133 Rock Breaker Day
134 Rock Hole Driller Day
135 Stone Chiseller Day
138 Sprayer (for bitumen, tar etc.) Day
139 Skilled Beldar (for floor rubbing etc.) Day
141 White Washer Day
155 Mason (average) Day
156 Carpenter (average) Day
157 Operator (Pile/ Special machine) Day
159 Skilled torch operator for laying tack Day
160 Sweeper Day
161 Helper Day
162 Dhobi Day
163 Tailor/Upholsterer Day

input (Labour) [3]

 (Integrated Building BSR 2022 Rajasthan)

INPUTS
ASIC RATES OF LABOUR
RATE
400.00
500.00
800.00
650.00
1000.00
800.00
600.00
500.00
400.00
800.00
600.00
700.00
700.00
700.00
600.00
600.00
1000.00
700.00
600.00
700.00
600.00
800.00
800.00
800.00
700.00
700.00
500.00
600.00
700.00
600.00
800.00
600.00
800.00
500.00
500.00
600.00

input (Labour) [4]

 (Integrated Building BSR 2022 Rajasthan)

INPUTS
BASIC RATES OF MATERIALS
CODE NAME OF MATERIALS UNIT
222 Seam bolts and nuts 6 mm dia and 25 mm long 10 Nos
223 Non - Asbestos fibre cement corrugated sheet 6mm thick. sqm
224 Non - Asbestos fibre cement close fitting adjustable ridge. metre
225 Non - Asbestos fibre cement corrugate serrated adjustable ridge. metre
226 Non - Asbestos fibre cement plain wing adjustable ridge. metre
227 Non - Asbestos fibre cement unserrated adjustable ridge for hips. metre
228 Non - Asbestos fibre cement corrugated appron piece. metre
229 Non - Asbestos fibre cement eaves filler piece. each
230 Non - Asbestos fibre cement north light curves. metre
231 Non - Asbestos fibre cement ventilator curves. each
232 Non - Asbestos fibre cement barge boards 6 mm thick. metre
233 Non - Asbestos fibre cement ridge finial . pair
234 Non - Asbestos fibre cement special north light curves. each
235 Non - Asbestos fibre cement S type louvers. each
236 Non - Asbestos multi purpose fibre cement board 6mm thick. sqm
237 Non - Asbestos multi purpose fibre cement board 8mm thick. sqm
285 Brick Aggregate (Single size) : 63 mm nominal size cum
286 Brick Aggregate (Single size) : 50 mm nominal size cum
287 Brick Aggregate (Single size) : 40 mm nominal size cum
291 Stone Aggregate (Single size) : 63 mm nominal size cum
292 Stone Aggregate (Single size) : 50 mm nominal size cum
293 Stone Aggregate (Single size) : 40 mm nominal size cum
294 Stone Aggregate (Single size) : 25 mm nominal size cum
295 Stone Aggregate (Single size) : 20 mm nominal size cum
296 Stone Aggregate (Single size) : 12.5 mm nominal size cum
297 Stone Aggregate (Single size) : 10 mm nominal size cum
298 Stone Aggregate (Single size) : 06 mm nominal size cum
302 Safeda ballies 125 mm diameter metre
304 Bajri cum
305 Bamboo 25 mm dia 2.5 metre long score
308 Bhusa quintal
309 Paving bitumen S-90 of approved quality tonne
310 Bitumen emulsion tonne
312 Bitumen grade PMB - 40 M.T.
313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne
314 Bitumen hot sealing compound : grade A kilogram
316 Bitumen solution primer of approved quality litre
317 Premoulded joint filler 12 mm thick sqm
318 Bitumen felt fibre base (vegetable or animal):Type 2 grade 1 sqm
322 Bitumen felt :Type 3 grade 1 sqm
324 Coal Tar litre
325 Blasting powder kilogram
326 Blasting fuse (fuse wire) each
328 White face insulating board:12 mm thick sqm
332 Natural colour insulating board:12 mm thick sqm
336 Flame retardent face insulating board: 12 mm thick sqm
338 Flame retardent face insulating, Impregnated fibre board 12 mm thick sqm
339 Flame retardent face insulating, Impregnated fibre board 18 mm thick sqm
340 Flame retardent face insulating, Impregnated fibre board 25 mm thick sqm
341 Flat pressed 3 layer particle board (medium density) Grade I :12 mm thick sqm
346 Extra for veneered particle board with : Teak veneering on one side and commercial sqm
veneered on other side
347 Extra for veneered particle board with : Commercial veneering on both sides sqm
348 Extra for veneered particle board with : Teak veneering on both sides sqm
349 SILFIL (Armour Bound) 20 mm thick sqm
350 SILFIL (Armour Bound) 25 mm thick sqm
351 SILFIL (Armour Bound) 30 mm thick sqm
352 SILFIL (Armour Bound) 40 mm thick sqm
353 Double side tape for fixing SILFIL (Density not less 30 kg./cum.) sqm

input (Material) [5]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

362 Brick bats cum
364 Wire brush each
365 Soft brush each
367 Portland Cement tonne
368 White Cement tonne
369 Shree binder tonne
370 Coal (steam) quintal
373 Cramp Gun metal 25x6x300 mm each
378 Brass butt hinges (light/ordinary type) : 125x70x4 mm 10 Nos
379 Brass butt hinges (light/ordinary type) : 100x70x4 mm 10 Nos
380 Brass butt hinges (light/ordinary type) : 75x40x2.5 mm 10 Nos
381 Brass butt hinges (light/ordinary type) : 50x40x2.5 mm 10 Nos
382 Brass butt hinges (heavy type) : 125x85x5.5 mm(.70)kg 10 Nos
383 Brass butt hinges (heavy type) : 100x85x5.5 mm(.56)kg 10 Nos
384 Brass butt hinges (heavy type) :75x65x4.0 mm(.20)kg 10 Nos
385 Brass parliamentary hinges 150x125x27x5 mm 10 Nos
386 Brass parliamentary hinges 125x125x27x5 mm 10 Nos
387 Brass parliamentary hinges 100x125x27x5 mm 10 Nos
388 Brass parliamentary hinges75x100x20x3.2 mm 10 Nos
389 Brass single acting spring hinges 150 mm each
390 Brass single acting spring hinges 125 mm each
391 Brass single acting spring hinges 100 mm each
392 Brass double acting spring hinges 150 mm each
393 Brass double acting spring hinges 125 mm each
394 Brass double acting spring hinges 100 mm each
400 Brass tower bolt (barrel type) 250x10 mm each
401 Brass tower bolt (barrel type) 200x10 mm each
402 Brass tower bolt (barrel type) 150x10 mm each
403 Brass tower bolt (barrel type) 100x10 mm each
404 Brass flush bolt 250 mm each
405 Brass flush bolt 150 mm each
406 Brass flush bolt 100 mm each
408 Brass handles 125 mm with plate 175x32 mm each
409 Brass handles 100 mm with plate 150x32 mm each
410 Brass handles75 mm with plate 125x32 mm each
411 Brass door latch 300x16x5 mm (0.380 kg) each
412 Brass door latch 250x16x5 mm (0.350 kg) each
413 Brass mortice latch and lock 100x65 mm with6 levers and a pair of brass lever handles each

414 Brass mortice latch 100x65mm with a pair of brass lever handles each
417 Brass 150 mm floor door stopper (0.357kg) each
418 Brass hard drawn hooks and eyes 300 mm 10 Nos
419 Brass hard drawn hooks and eyes 250 mm 10 Nos
420 Brass hard drawn hooks and eyes 200 mm 10 Nos
421 Brass hard drawn hooks and eyes 150 mm 10 Nos
422 Brass hard drawn hooks and eyes 100 mm 10 Nos
423 Brass casement window fastener Each
424 Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg each

425 Brass casement stays (straight peg type ) 250 mm weighing not less than 0.28 kg Each

426 Brass casement stays (straight peg type ) 200 mmweighing not less than 0.24 kg each

427 Brass quadrant stays 300 mm each

428 Brass fanlight catch 10 Nos
429 Brass fanlight pivot 10 Nos
430 Brass chain with hook for fan light catch each
431 Brass hasps and staples (safety type) 300 mm 10 Nos
432 Brass hasps and staples (safety type) 115 mm 10 Nos
433 Brass hasps and staples (safety type)90 mm 10 Nos
438 Brass Night latch each
442 Brass helical spring 150 mm each
444 Brass curtain rod 20 mm dia 1.25 mm thick metre

input (Material) [6]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

445 Brass curtain rod 25 mm dia 1.25 mm thick metre
446 Brass brackets (curtain rods) 20 mm each
447 Brass cupboard knob or ward robe knob 50 mm each
449 Brass screws 50 mm 100 Nos
450 Brass screws 40 mm 100 Nos
451 Brass screws 30 mm 100 Nos
452 Brass screws 25 mm 100 Nos
453 Brass screws 20 mm 100 Nos
524 Chromium plated Brass butt hinges (lheavy) type 75x65x4 .0 mm (200gms) 10 Nos
525 Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm 10 Nos
526 Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm 10 Nos
527 Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm 10 Nos
528 Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm 10 Nos
555 Chromium plated Brass handles 125 mm with plate 175 x32 mm Each
556 Chromium plated Brass handles 100 mm with plate 150 x 32 mm Each
557 Chromium plated Brass handles 75mm with plate 125x32 mm Each
558 Chromium plated Brass mortice latch and lock 100x65 mm with6 levers and a pair of each
brass lever handles
568 Chromium plated brass casement window fastner each
569 Chromium plated Brass casement stays (straight peg type ) 300 mmweighing not less than each
0.33 kg
570 Chromium plated Brass casement stays (straight peg type ) 250 mmweighing not less than each
0.28 kg
571 Chromium plated Brass casement stays (straight peg type ) 200 mmweighing not less than each
0.24 kg
583 Chromium plated Brass Night latch each
584 Chromium plated Brass Wardrobe Knobe 50 mm each
585 Chromium plated Brass screws 50 mm 100 Nos
586 Chromium plated Brass screws 40 mm 100 Nos
587 Chromium plated Brass screws 30 mm 100 Nos
588 Chromium plated Brass screws 25 mm 100 Nos
589 Chromium plated Brass screws 20 mm 100 Nos
590 Chromium plated Brass curtain rod 12 mm dia 1.25mm thick metre
591 Chromium plated Brass curtain rod 20 mm dia 1.25mm thick metre
592 Chromium plated Brass curtain rod 25 mm dia 1.25mm thick metre
594 Bright finished or black enamelled mild steel butt hinges 125x65x2.12 mm 10 Nos
595 Bright finished or black enamelled mild steel butt hinges 100x58x1.90 mm 10 Nos
596 Bright finished or black enamelled mild steel butt hinges75x47x1.70 mm 10 Nos
597 Bright finished or black enamelled mild steel butt hinges50x37x1.50 mm 10 Nos
608 Nickel plated mild steel piono hinges 1 mm thick 35 mm wide metre
635 Bright finished or black enamelled mild steel screws 50 mm 100 Nos
637 Bright finished or black enamelled mild steel screws 40 mm 100 Nos
638 Bright finished or black enamelled mild steel screws 30 mm 100 Nos
639 Bright finished or black enamelled mild steel screws 25 mm 100 Nos
640 Bright finished or black enamelled mild steel screws 20 mm 100 Nos
641 Bright finished or black enamelled mild steel bolts and nuts 50x6 mm each
642 Oxidised mild steel butt hinges 125x65x2.12 mm 10 Nos
643 Oxidised mild steel butt hinges 100x58x1.90 mm 10 Nos
644 Oxidised mild steel butt hinges75x47x1.70 mm 10 Nos
645 Oxidised mild steel butt hinges50x37x1.50 mm 10 Nos
646 Oxidised mild steel parliamentary hinges150x125x27x2.8 mm 10 Nos
647 Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm 10 Nos
648 Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm 10 Nos
649 Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm 10 Nos
650 Oxidised mild steel single acting spring hinges 150 mm each
651 Oxidised mild steel single acting spring hinges 125 mm each
652 Oxidised mild steel single acting spring hinges 100 mm each
653 Oxidised mild steel double acting spring hinges 150 mm each
654 Oxidised mild steel double acting spring hinges 125 mm each
655 Oxidised mild steel double acting spring hinges 100 mm each
656 Nickel plated mild steel piono hinges 1 mm thick 35 mm wide metre
660 Oxidised mild steel sliding door bolt 300x16 mm each
661 Oxidised mild steel sliding door bolt 250x16 mm each

input (Material) [7]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

662 Oxidised mild steel door latch 300x20x6 mm each
663 Oxidised mild steel door latch 250x20x6 mm each
664 Oxidised mild steel tower bolt (barrel type) 250x10 mm each
665 Oxidised mild steel tower bolt (barrel type) 200x10 mm each
666 Oxidised mild steel tower bolt (barrel type) 150x10 mm each
667 Oxidised mild steel tower bolt (barrel type) 100x10 mm each
668 Oxidised mild steel handles 125 mm each
669 Oxidised mild steel handles 100 mm each
670 Oxidised mild steel handles75 mm each
679 Oxidised mild steel hasps and staples(safety type) 150 mm 10 Nos
680 Oxidised mild steel hasps and staples(safety type) 115 mm 10 Nos
681 Oxidised mild steel hasps and staples(safety type)90 mm 10 Nos
682 Oxidised mild steel screws 50 mm 100 Nos
683 Oxidised mild steel screws 40 mm 100 Nos
684 Oxidised mild steel screws 30 mm 100 Nos
685 Oxidised mild steel screws 25 mm 100 Nos
686 Oxidised mild steel screws 20 mm 100 Nos
687 Anodised Aluminium butt hinges 125x75x4 mm 10 Nos
688 Anodised Aluminium butt hinges 125x63x4 mm 10 Nos
689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos
690 Anodised Aluminium butt hinges 100x63x3.2 mm 10 Nos
691 Anodised Aluminium butt hinges 100x63x4 mm 10 Nos
692 Anodised Aluminium butt hinges 75x63x4 mm 10 Nos
693 Anodised Aluminium butt hinges 75x63x3.2 mm 10 Nos
694 Anodised Aluminium butt hinges 75x45x3.2 mm 10 Nos
696 Anodised Aluminium sliding door bolt 300x16 mm each
697 Anodised Aluminium sliding door bolt 250x16 mm each
698 Anodised Aluminium tower bolt (barrel type)300x10 mm 10 Nos
699 Anodised Aluminium tower bolt (barrel type)250x10 mm 10 Nos
700 Anodised Aluminium tower bolt (barrel type)200x10 mm 10 Nos
701 Anodised Aluminium tower bolt (barrel type)150x10 mm 10 Nos
702 Anodised Aluminium tower bolt (barrel type)100x10 mm 10 Nos
703 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 10 Nos
704 Anodised Aluminium handles 100 mm with plate 150 x 32 mm 10 Nos
705 Anodised Aluminium handles 75mm with plate 125 x 32 mm 10 Nos
706 Anodised Aluminium kicking plate 50 cm long100x3.15 mm each
713 Block board construction flush door with teak wood ply on both faces 35 mm thick sqm

714 Block board construction flush door with teak wood ply on both faces 30 mm thick sqm

715 Block board construction flush door with teak wood ply on both faces 25 mm thick sqm

717 Block board construction flush door with commercial ply on both faces 35 mm thick sqm

718 Block board construction flush door with commercial ply on both faces 30 mm thick sqm

719 Block board construction flush door with commercial ply on both faces 25 mm thick sqm

720 Block board construction flush door with teak wood ply on one faces 35 mm thick sqm

721 Block board construction flush door with teak wood ply onone faces 30 mm thick sqm

722 Block board construction flush door with teak wood ply on one faces 25 mm thick sqm

752 Block board construction flush door lipping sqm of door area
753 Square vision panel in Block board construction flush door sqm of door area
754 Circular vision panel in Block board construction flush door Sqm of doo
755 Decorative type Louvers in Block board construction flush door sqm of door area
757 Rebate cutting in Block board construction flush door sqm of door area
759 Decorative plywood 4 mm sqm
761 Fuel wood quintal
763 Glue kilogram
765 Hessian cloth sqm

input (Material) [8]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

768 Cement Concrete Jali 50 mm thick sqm
769 Cement Concrete Jali 40 mm thick sqm
770 Cement Concrete Jali 30 mm thick sqm
771 Kerosene oil litre
772 Synthetic colour Kg
773 Unslaked lime quintal
774 Khameera Kg
775 Dehradun white lime quintal
776 Satna lime quintal
777 Dry hydrated lime (factory made) quintal
784 Marble dust/ powder cum
785 Marble chips upto 4mm and downsize White & black quintal
788 Marble chips large size above 4 mm White & black quintal
789 Jhingra cum
790 MS hold fast Nos
810 Moorum cum
811 Mud (dry) cum
815 Dry distemper kilogram
816 Oil bound washable distemper/ Acrylic distemper kilogram
818 Linseed oil (double boiled) litre
820 Cement primer litre
821 Distemper primer litre
823 Pink primer (for wood) litre
826 Aluminium paint litre
827 Acid proof paint (chocolate or black) litre
828 Anticorrosive bituminous paint (black) litre
829 Black japan litre
830 Enamel paint litre
831 Floor enamel paint in all shades except green litre
833 Synthetic enamel paint in black or chocolate shade litre
834 Synthetic enamel paint in all shades except black or chocolate shade litre
835 Plastic emulsion paint litre
845 Roofing paint for iron sheets in red colour litre
850 White lead kilogram
851 Water proofing cement paint kilogram
855 Wax polish (ready made) kilogram
856 Ordinary varnish litre
857 Superior copal varnish litre
858 Superior spar varnish litre
859 Oil type wood preservative litre
863 Putty for wood work kilogram
865 Pig lead kilogram
868 Premixed super white gypsum plaster. kg
869 Plaster of Paris kilogram
870 Plug each
871 White cement based putty kilogram
873 Copper pins 6 mm dia 7.5 cm long each
874 Black colour dark shade pigment kilogram
875 Red, chocolate, orange, buff or yellow (red oxide of iron) light shade pigment kilogram

876 Green or blue medium shade pigment kilogram

886 Standard holdar bat clamps for sand cast iron or cast iron pipes 150 mm dia each
887 Gur Kg
888 Methi Kg
889 Hemp Kg
890 Water for wetting of bedding sand kl
966 Sand Cast iron plain shoe 150 mm dia each
967 Copper plate kilogram
969 Pully 25 mm dia each
973 Rolling shutter made of 80x1.25 mm machine rolled laths sqm
974 Top cover for rolling shutters metre
975 27.5 cm long wire spring grade no 2 for rolling shutters each
976 Ball bearing for rolling shutters each

input (Material) [9]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

977 Extra for mechanical devices chain and cranked operation for operatingrolling shutters : sqm
exceeding 10.00 sq.m and upto 16.80 sq.m area of door

978 Extra for mechanical devices chain and cranked operation for operating rolling shutters : sqm
exceeding 16.80 sq.m area of door
979 Royalty for good earth cum
980 Royalty for sludge cum
982 Coarse sand (zone III) cum
983 Fine sand (zone IV) cum
984 Blown Sand cum
992 Galvanised steel plain sheets quintal
994 Standard quality hard board sheet 3 mm thick sqm
996 Standard quality hard board sheet 4.5 mm thick sqm
999 Shellac kilogram
1000 Spirit litre
1001 Spunyarn kilogram
1002 Mild steel round bar 12 mm dia and below quintal
1003 Mild steel round bar above 12 mm dia quintal
1004 Average rate of Mild steel round bars for reinforcements quintal
1005 Twisted steel / deformed bars quintal
1006 Mild steel square bars quintal
1007 Structurals such as tees,angles channels and R.S. joists quintal
1008 Flats upto 10 mm in thickness quintal
1009 Flats exceeding 10 mm in thickness quintal
1010 Mild steel plates quintal
1013 Mild steel sheets for tanks quintal
1015 Mild steel expanded metal 20x60 mm strands sqm
1016 TMT bar quintal
1019 Mild steel hooks each
1020 Mild steel rivets quintal
1021 Hard drawn steel wire fabric sqm
1022 Galvanised steel bolts & nuts 6 mm dia and 25 mmlong round head with slots 10 Nos

1023 Galvanised steel J or L hooks 8 mm dia 10 Nos

1024 Galvanised steel bolts & nuts 10 mm dia and 125 mm long round head with slots each

1025 Mild stel bolts 6 mm dia and 25 mm long with hexagonal head 10 Nos
1026 Black steel barbed wire quintal
1028 Straining bolts each
1029 Galvanised steel barbed wire quintal
1030 Galvanised steel turn buckles each
1031 Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 each
galvanised steel nuts
1032 Galvanised steel bolts 10 mm dia and 7 cm long with nuts each
1034 Bolts and nuts upto 300 mm in length quintal
1035 Bolts and nuts above 300 mm in length quintal
1036 Iron pintels including welded pin each
1037 Binding wire Kg
1038 Wire mesh (rabbit) Sqm
1143 Steel beading metre
1145 Aluminium Plain Strip edging 38x12x3 mm metre
1148 Glass strip 3 mm thick 20 mm deep metre
1149 Glass strip 4 mm thick40 mm deep metre
1151 Boundry stone top chisel dressed 15x15x90 cm each
1154 Through and bond stone 100 Nos
1157 Stone for masonary work cum
1158 Stone for pitching 15 cm x 22.5 cm cum
1159 Stone dust cum
1160 Red sand stone block 10 cudm
1161 White/Pink sand stone block 10 cudm
1162 White sand stone 100mm thick sqm
1163 White sand stone slab 75 mm thick (un-dressed) sqm
1164 Red sand stone slab 40 mmthick (un-dressed) sqm

input (Material) [10]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1165 White sand stone slab 40 mm thick (un-dressed) sqm
1166 Red sand stone slab 30 mmthick (un-dressed) sqm
1167 Stone chajja patti sqm
1168 Kota stone slab 20 mm to 25 mm thick (semi-polished) sqm
1169 Kotastone slab 40mm thick (rough chisled) sqm
1170 Katla stone pati 80 mm thick sqm
1171 Katla stone pati 50 mm thick sqm
1172 Stone slab sqm
1173 Kota stone slab minimum 30mm thick (semi-polished) sqm
1174 Red sand stone slab 45 mm and 50 mm thick (un-dressed) sqm
1175 White sand stone slab 45 mm and 50 mm thick (un-dressed) sqm
1177 Stone grit 6 mm and down size or pea sized gravel cum
1179 Crushed stone 2.36 mm to 12.5 mm size cum
1182 Surkhi cum
1183 Shesham wood 10 cudm
1184 Nigeria wood 10 cudm
1185 Ghana wood 10 cudm
1186 Superior class teak wood such as Dandeli, Balarshah or Malabar in planks 10 cudm
1187 First class teak wood in scantling 10 cudm
1188 First class teak wood in planks 10 cudm
1189 Second class teak wood in scantling 10 cudm
1190 Second class teak wood in planks 10 cudm
1191 Ivory coast 10 cudm
1192 Chir wood 10 cudm
1194 Second class deodar wood in planks 10 cudm
1196 First class kail wood in planks 10 cudm
1197 Second class kail wood in scantling 10 cudm
1198 Second class kail wood in planks 10 cudm
1199 Sal wood in scantling 10 cudm
1201 Precast terrazo tiles 22 mm thick (light shade) sqm
1202 Precast terrazo tiles 22 mm thick(medium shade) sqm
1203 Precast terrazo tiles 22 mm thick (dark shade) sqm
1204 Precast terrazo tiles 20 mm thick for roof sqm
1207 G.I. Limpet washer 100 Nos
1208 Bitumen washer 100 Nos
1209 G.I. plain washer thick 100 Nos
1210 G.I. plain washer thin 100 Nos
1211 G.I. plain washer for seam bolts 100 Nos
1213 Water proofing materials kilogram
1214 Welding by gas plant cm
1215 Welding by electric plant cm
1216 Whiting quintal
1218 Spigot for standard jointing kilogram
1219 Wire nails kilogram
1220 Wire mesh (rabbit) sqm
1221 20 mm dia holding down bolts quintal
1222 Mild steel sheets with bolts and nuts to rest on pintels each
1224 Hard drawn steel wire quintal
1225 Mild steel flat strap fitting quintal
1227 Chequered terrazo tiles 22 mm thick(light shade) sqm
1228 Chequered terrazo tiles 22 mm thick(medium shade) sqm
1229 Chequered terrazo tiles 22 mm thick (dark shade) sqm
1231 Extra for selected planks of second class teakwood 10 cudm
1234 Aluminium Plain Strip edging 57x12x3 mm metre
1235 Diesel oil litre
1237 Cutting marble or sand stone slab upto 50 mm thick by mechanical device metre
1238 Extra for selected planks of first class teakwood 10 cudm
1241 Commercial LPG in cylinder. kg
1301 Bleaching powder quintal
1304 Surface box for stop cock each
1305 Surface box for sluice valve each
1307 Surface box for water meter each
1309 C.I. bracket for wash basin and sinks pair

input (Material) [11]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1314 C.P.brass chain with 32 mm dia rubber plug each
1315 C.P.brass chain with 40 mm dia rubber plug each
1330 Clamps and M.S. stays including bolts and nuts for 100 mm pipe each
1331 M.S.Holder bat clamp of approved design for 100 mm S.C.I. pipe each
1332 M.S.Holder bat clamp of approved design for75 mm S.C.I. pipe each
1334 Clamps and M.S. stays including bolts and nuts for 50 mm pipe each
1335 Clamps and M.S. stays including bolts and nuts for 75 mm pipe each
1336 Clearing eye with chain and lid 100 mm dia each
1337 Clearing eye with chain and lid 150 mm dia each
1339 Brass bib-cock 15 mm dia each
1340 Brass bib-cock 20 mm dia each
1342 Brass stop-cock 15 mm dia each
1343 Brass stop-cock 20 mm dia each
1350 Mosquito proof coupling of approved design each
1352 C.I. cover and frame 300x300 mm inside each
1353 C.I.cover without frame 300x300mm inside i.e.cover of 4.50 kg each
1354 Rectangular cover 455x610 mm with frame (low duty) each
1355 Rectangular cover 455x610mm without frame (low duty) each
1356 500 mm dia cover with frame (medium duty) each
1357 500 mm dia cover without frame (medium duty) each
1358 ferrow cement cover and frame 300x300 mm inside each
1360 C.I.mouth, brass ferrule 15 mm dia each
1361 C.I.mouth, brass ferrule 20 mm dia each
1362 C.I.mouth, brass ferrule 25 mm dia each
1363 Vitreous china foot rests 250x130x30 mm pair
1364 C.I. grating 100x100 mm each
1366 C.I. grating 150x150 mm each
1367 C.I. grating 180x180 mm each
1368 C.I. grating 225x225 mm each
1369 S.C.I. gully or nahani grating 100 mm dia each
1373 Rubber insertions for80 mm dia pipe joints each
1374 Rubber insertions for 100 mm dia pipe joints each
1375 Rubber insertions for 125 mm dia pipe joints each
1376 Rubber insertions for 150 mm dia pipe joints each
1377 Rubber insertions for 200 mm dia pipe joints each
1378 Rubber insertions for 250 mm dia pipe joints each
1379 Rubber insertions for 300 mm dia pipe joints each
1380 Rubber insertions for 350 mm dia pipe joints each
1381 Rubber insertions for 400 mm dia pipe joints each
1382 Rubber insertions for 450 mm dia pipe joints each
1383 Rubber insertions for 500 mm dia pipe joints each
1384 Rubber insertions for 600 mm dia pipe joints each
1391 bevelling/teak wood lipping of mirror 60x45cm each
1392 Mirror of superior make glass 60x45 cm Each
1393 Mirror of superior make 4mm thick Sqm
1396 Vitrous china pedestal for wash basin each
1397 Pig lead kilogram
1402 Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan Size 450 each
mm.
1403 Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan Size 510 each
mm.
1404 Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan Size 580 each
mm.
1405 100 vitrious china P or S Trap each
1406 Indian type white glazed vitreous china Ist quality W.C. orissa pan each
Size 530x410mm.
1407 Indian type white glazed vitreous china Ist quality W.C. orissa pan each
Size 580x440 mm.
1408 Carriage and fixing of material (Seat Cover etc.) each
1409 European type white glazed vitreous china Ist quality W.C. pan each
1410 European type white glazed vitreous china Ist quality Double symphonic W.C. each

1411 European type white glazed vitreous china Ist quality W.C. Wall Mounting. each

input (Material) [12]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1412 European type white glazed vitreous china Ist quality W.C. Wall Mounting.(extended) each

1413 European type white glazed vitreous china Ist quality W.C. Wall Mounting (syphonic) each

1414 White glazed Conversion Bend for W.C. from P trap to S trap each
1415 White Vitreous China Double Syphonic European W.C.with mounted W.V.C. flushing each
cistern of of 10 litre capacity
1416 WVC Urinal Flat Back (small) size 440x265x315 mm. each
1417 WVC Urinal Flat Back (large) or half stall size 590x375x390 mm. each
1418 WVC Urinal Mini stall size 440x315x320 mm. each
1420 Dome Waste coupling for urinal 32 mm each
1421 Iron bracket/Plugs & Screws for urinal installation pair
1422 W.V.C. Urinal Partition plate size 630x315 each
1423 Marble Urinal Partition slab both sides polished size 900x600mm.Makrana II quality each
marble having light spots.
1424 Marble Urinal Partition slab both sides polished size 900x600mm. Makrana II quality each
marble having light spots.
1425 Marble Urinal Partition slab both sides polished size 900x600mm. Makrana 'Adanga' or each
Raj Nagar ISt Quality White or Andhi Indi-Italian marble.
1426 W.V.C. Half-Round Channel Size 100 mm dia. Mtr
1427 W.V.C. Half-Round Channel Size 150 mm dia. Mtr
1428 High Level Flushing Cistern of 10 Litres capacity each
1429 32mm G.I. Flush pipe each
1430 over flow pipe 185cm each
1431 brackets each
1432 Low level Flushing Cistern of 10 litres capacity : WVC with C.P. brass bend. each

1433 Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend as per IS : 7231 each

1434 Low level Flushing Cistern of 10 litres capacity : PVC with PVC bend and superior each
internal fittings
1435 Low level Flushing Cistern of 10 litres capacity : WVC for symphonic EWC. each

1436 Low level Flushing Cistern of 10 litres capacity : PVC with CP brass long band. each

1437 Automatic Flushing Cistern each

1438 bend each
1439 G.I. Flush pipe 'B' class (Concealed) 25 mm. each
1440 G.I. Flush pipe 'B' class (Concealed) 32 mm. each
1441 M.S. clamps each
1442 Flush pipe PVC exposed (heavy) 32 mm. each
1443 Flush pipe GI (Sheet) hot galvanized exposed (10 Litres). each
1444 WVC (10 litres) low-level flushing cistern with cover. each
1445 WVC (10 litres) low level flushing cistern cover only. each
1446 WVC siphon with plunger plate only. each
1447 WVC Auto cistern with cover only. each
1448 WVC Auto cistern cover only. each
1449 C.P. brass Urinal Flush pipe set For 4 Urinals. each
1450 C.P. brass Urinal Flush pipe set For 3 Urinals. each
1451 C.P. brass Urinal Flush pipe set For 2 Urinals. each
1452 C.P. brass Urinal Flush pipe set For 1 Urinals. each
1453 C.P. brass Urinal Spreader for stall urinal each
1454 Synthetic (PTMT) Urinal Spreader for stall urinal each
1455 Dome Waste coupling for urinal 40 mm each
1456 Plastic Syphon of approved make for automatic flush tank. each
1457 Copper tube Syphon for auto flush tank. each
1458 C.P. Brass flush Valve Lever type with Elbow 32 mm dia. each
1459 C.P. Brass flush Valve Push type with Elbow 32 mm dia. each
1460 flush Bend each
1461 C.P. Brass flush Valve Concealed type for 112 mm. each
1462 C.P. Brass flush Valve for 225 mm each
1464 S & S.C.I.standard specials upto 300 mm dia (heavy class) quintal
1466 S & S.C.I.standard specials over 300 mm dia (heavy class) quintal

input (Material) [13]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1468 Flanged C.I. standard specials upto 300 mm dia(heavy class) quintal
1470 Flanged C.I. standard specials over 300 mm dia(heavy class) quintal
1472 Casing pipe 100 mm dia metre
1532 Flush pipe with union spreaders and clamps all in C.P. brass for single stall each
1533 Flush pipe with union spreaders and clamps all in C.P. brass for double stall each
1534 Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall each

1535 Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall each

1540 Flush pipe and spreaders G.I.for single set of one squatting plate urinal each
1541 Flush pipe and spreaders G.I.for range of two squatting plates urinal each
1542 Flush pipe and spreaders G.I.for range of three squatting plates urinal each
1543 Flush pipe and spreaders G.I.for range of four squatting plates urinal each
1545 G.I. pipes 15 mm dia (B Class) metre
1546 G.I. pipes 20 mm dia (B Class) metre
1547 G.I. pipes 25 mm dia (B Class) metre
1548 G.I. pipes 32 mm dia (B Class) metre
1549 G.I. pipes 40 mm dia (B Class) metre
1550 G.I. pipes 50 mm dia (B Class) metre
1551 G.I. pipes 65 mm dia (B Class) metre
1552 G.I. pipes 80 mm dia (B Class) metre
1555 G.I. back (jam) nuts25 mm dia each
1559 G.I. back (jam) nuts65 mm dia each
1608 G.I. tees (equal) 25 mm each
1612 G.I. tees (equal) 65 mm each
1614 G.I. inlet connection each
1615 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:50mm dia each
1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:75mm dia each
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 100mm dia each

1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150mm dia each

1620 S.C.I. plain bend75mm dia each

1621 S.C.I. plain bend 100mm dia each
1622 S.C.I. plain bend 150mm dia each
1624 S.C.I. bend with access door 75mm dia each
1625 S.C.I. bend with access door 100mm dia each
1627 S.C.I. plain single equal junctions75x75x75 mm dia each
1628 S.C.I. plain single equal junctions100x100x100 mm dia each
1630 S.C.I. single equal junctions75x75x75 mm dia with access door. each
1631 S.C.I. single equal junctions 100x100x100 mm dia with access door. each
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each
1634 S.C.I. plain double equal junctions100x100x100x100 mm dia each
1636 S.C.I. double equal junctions75x75x75x75 mm dia with access door. each
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with access door. each

1639 Slotted cowl (terminal guard )75 mm dia each

1640 Slotted cowl (terminal guard ) 100 mm dia each
1641 G.I. Union 15 mm nominal bore each
1642 G.I. Union 20 mm nominal bore each
1643 G.I. Union 25 mm nominal bore each
1644 G.I. Union 32 mm nominal bore each
1645 G.I. Union 40 mm nominal bore each
1646 G.I. Union 50 mm nominal bore each
1647 G.I. Union 65 mm nominal bore each
1648 G.I. Union 80mm nominal bore each
1649 Polyethylene water storage tank with cover and suitable locking arrangement per litre
1653 Sand cast iron S&S plain single unequal junctions : 100x100x75 mm dia each
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia with access door. each

1659 Sand cast iron S&S plain double unequal junctions : 100x100x75x75 mm dia each

input (Material) [14]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm dia with access door. each

1666 Sand cast iron heel rest bend75mm dia each

1667 Sand cast iron heel rest bend 100mm dia each
1669 S.C.I. single equal invert branch of required degree75x75x75 mm dia each
1670 S.C.I. single equal invert branch of required degree 100x100x100 mm dia each
1672 S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia each
1673 S.C.I. double equal invert branch of required degree 100x100x100x100 mm dia each

1674 S.C.I. single unequal invert branch of required degree100x100x75 mm dia each
1677 S.C.I. double unequal invert branch of required degree 100x100x75x75 mm dia each

1682 S.C.I. door pieces 75 mm dia each

1683 S.C.I. door pieces 100 mm dia each
1685 S.C.I. collar 75 mm dia each
1686 S.C.I. collar 100 mm dia each
1687 Unplasticised P.V.C.connection pipe with brass union 30 cm long 15 mm bore each

1688 Unplasticised P.V.C.connection pipe with brass union 30 cm long 20 mm bore each

1689 Unplasticised P.V.C.connection pipe with brass union 45 cm long 15 mm bore each

1690 Unplasticised P.V.C.connection pipe with brass union 45 cm long 20 mm bore each

1693 S.C.I. hand pump each

1700 R.C.C. pipes NP2 class 100 mm dia meter
1701 R.C.C. pipes NP2 class 150 mm dia meter
1702 R.C.C. pipes NP2 class 250 mm dia meter
1703 R.C.C. pipes NP2 class 300 mm dia meter
1704 R.C.C. pipes NP2 class 450 mm dia meter
1705 R.C.C. pipes NP2 class 500 mm dia meter
1706 R.C.C. pipes NP2 class 600 mm dia meter
1707 R.C.C. pipes NP2 class 700 mm dia meter
1709 R.C.C. pipes NP2 class 800 mm dia meter
1710 R.C.C. pipes NP2 class 900 mm dia meter
1711 R.C.C. pipes NP2 class 1000 mm dia meter
1712 R.C.C. pipes NP2 class 1100 mm dia meter
1713 R.C.C. pipes NP2 class 200 mm dia meter
1714 R.C.C. collarsNP2 class 100 mm dia each
1715 R.C.C. collarsNP2 class 150 mm dia each
1716 R.C.C. collarsNP2 class 250 mm dia each
1717 R.C.C. collarsNP2 class 300 mm dia each
1718 R.C.C. collarsNP2 class 450 mm dia each
1719 R.C.C. collarsNP2 class 500 mm dia each
1720 R.C.C. collarsNP2 class 600 mm dia each
1721 R.C.C. collarsNP2 class 700 mm dia each
1723 R.C.C. collarsNP2 class 800 mm dia each
1724 R.C.C. collarsNP2 class 900 mm dia each
1725 R.C.C. collarsNP2 class 1000 mm dia each
1726 R.C.C. collarsNP2 class 1100 mm dia each
1727 R.C.C. collarsNP2 class 1200 mm dia each
1728 R.C.C. collarsNP2 class 200 mm dia each
1854 Stoneware pipes grade A (60 cm long) 100 mm dia each
1855 Stoneware pipes grade A (60 cm long) 150 mm dia each
1856 Stoneware pipes grade A (60 cm long) 200 mm dia each
1857 Stoneware pipes grade A (60 cm long) 230 mm dia each
1858 Stoneware pipes grade A (60 cm long) 250 mm dia each
1859 Stoneware pipes grade A (60 cm long) 300 mm dia each
1860 Stoneware pipes grade A (60 cm long) 400 mm dia each
1863 Fire clay kitchen sink: 600x450x250 mm each
1864 Fire clay kitchen sink: 600x450x200 mm each
1865 White vitreous china laboratry sink 530x430x180 mm. each

input (Material) [15]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1866 White vitreous china laboratry sink 500x350x150 mm. each
1867 Mosaic fine polished kitchen sink size 600x450x200 mm. each
1868 Mosaic fine polished kitchen sink size 450x450x200 mm. each
1869 Mosaic fine polished kitchen sink size 600 x 450 x 200 mm with 600 x 450mm drain each
board
1871 White vitreous china laboratry sink450x300x150 mm each
1872 White vitreous china laboratry sink600x450x200 mm each
1873 Drain Board WVC (I.S.: 2556 Mark) size 530 x 450mm each
1874 Drain Board Mosaic fine polished size 600 x 450 each
1875 White plastic seat (solid)with lid C.P.brass hinges and rubber buffers each
1876 Black plastic seat (solid) with lid C.P.brass hinges and rubber buffers each
1878 Shower rose C.P.brass for 15 to 20 mm inlet 100 mm dia each
1879 Shower rose C.P.brass for 15 to 20 mm inlet 150 mm dia each
1881 Spun yarn kilogram
1882 Strainer brass 40 mm dia 1.5 metre long each
1885 15 mm C.P.brass tap each
1889 C.P.brass toilet paper holder of standard size each
1891 C.I. trap for standard urinal with vent arm with operating and other couplings in each
C.P.brass: 50 mm dia
1893 C.I. trap for standard urinal with vent arm with operating and other couplings in each
C.P.brass: 80 mm dia
1894 CI P trap each
1895 C.P.brass trap40 mm dia each
1896 100 mm S.C.I. trap with vent heel each
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each
1898 100 mm S.C.I. trap with 100 mm inlet and75 mm outlet each
1900 S.W. gully trap P type 100x100 mm each
1902 S.W. gully trap P type 150x100 mm each
1903 S.W. gully trap P type 225x150 mm each
1904 S.W. gully trap P type 180x150 mm each
1913 Vitros china lipped front urinal each
1915 Vitros china squatting plate urinal Size 450x350mm each
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia each
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia each
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia each
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia each
1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia each
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia each
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia each
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each
1940 C.I.sluice valve (with caps) class I : 100 mm dia each
1941 C.I.sluice valve (with caps) class I : 125 mm dia each
1942 C.I.sluice valve (with caps) class I : 150 mm dia each
1943 C.I.sluice valve (with caps) class I : 200 mm dia each
1944 C.I.sluice valve (with caps) class I : 250 mm dia each
1945 C.I.sluice valve (with caps) class I : 300 mm dia each
1947 Vitreous china flat back wash basin 630x450 mm each
1949 Vitreous china angle back wash basin 600x480 mm each
1950 Vitreous china angle back wash basin 400x400 mm each
1951 C.P. brass waste coupling 32 mm each
1952 C.P. brass waste coupling 40 mm each
1953 Vitreous china indian type w.c. pan size 580 mm each
1954 Vitreous china orrisa type w.c. pan size 580 mm each
1955 Vitreous china pedestal type water closet each
1956 Bolts and nuts 16 mm dia 60 mm long each
1957 Bolts and nuts 16 mm dia 65 mm long each

input (Material) [16]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

1958 Bolts and nuts 20 mm dia 65 mm long each
1959 Bolts and nuts 20 mm dia 70 mm long each
1960 Bolts and nuts 20 mm dia 75 mm long each
1961 Bolts and nuts 20 mm dia 80 mm long each
1962 Bolts and nuts 24 mm dia 85 mm long each
1963 Bolts and nuts 24 mm dia 90 mm long each
1964 Bolts and nuts 27 mm dia 100 mm long each
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as each
sequatting pan or European type water closet as per manufacturer's specifications

1966 C.P. brass waste coupling 50 mm each

1967 SS waste coupling 125 mm each
1968 P.V.C Waste pipe with C.P nut 32 mm each
1969 P.V.C Waste pipe with C.P. nut 40 mm dia each
1970 P.V.C Waste pipe with PVC nut 32 mm each
1971 P.V.C Waste pipe with C.P nut 40 mm each
1972 Waste pipe with G.I(B class) 25mm each
1973 Waste pipe with G.I(B class) 32mm each
1974 Waste pipe with G.I(B class) 40 mm each
1979 Vitreous china foot rests 250x125x25 mm pair
1980 Flyash cum
1984 F.P.S. bricks tile class designation 100 1,000 Nos
1986 Modular bricks class designation 75 1,000 Nos
2200 Carriage of steam coal tonne
2201 Carriage of Bricks 1,000 Nos
2202 Carriage of Stone aggregate below 40 mm nominal size cum
2203 Carriage of Coarse sand cum
2204 Carriage of Timber cum
2205 Carriage of Steel tonne
2206 Carriage of Stone aggregate 40 mm nominal size and above cum
2207 Carriage of Brick tiles 1,000 Nos
2208 Carriage of Lime cum
2209 Carriage of Cement tonne
2210 Carriage of Shree binder tonne
2211 Carriage of Tar bitumen tonne
2215 Carriage of Soling stone & masonary stone cum
2216 Carriage of Stone blocks white & red sand stone & kota stone slab tonne
2224 Carriage of S.W. pipes100 mm dia 100 metre
2225 Carriage of S.W. pipes150 mm dia 100 metre
2226 Carriage of S.W. pipes200 mm dia 100 metre
2227 Carriage of S.W. pipes230 mm dia 100 metre
2228 Carriage of S.W. pipes250 mm dia 100 metre
2229 Carriage of S.W. pipes300 mm dia 100 metre
2241 Carriage of Good earth cum
2242 Carriage of Dump manure cum
2260 Carriage of Brick aggregate cum
2261 Carriage of Fine sand (1 part badarpur sand : 2 parts jamuna sand) cum
2262 Flyash cum
2264 Carriage of Rubbish cum
2265 Carriage of Moorum cum
2266 Carriage of Surkhi cum
2267 Carriage of Stone dust cum
2268 Carriage of Marble dust and marble chips cum
2271 Carriage of G.I. pipes below 100 mm dia tonne
2273 Carriage of A.C.sheet and accessories tonne
2275 Carriage of R.C.C. pipes 100 mm dia 100 metre
2281 Carriage of R.C.C. pipes 150 mm dia 100 metre
2287 Carriage of R.C.C. pipes 250 mm dia 100 metre
2290 Carriage of R.C.C. pipes 300 mm dia 100 metre
2299 Carriage of R.C.C. pipes 450 & 500 mm dia 100 metre
2302 Carriage of G.I.sheet and accessories tonne
2303 Carriage of R.C.C. pipes 600, 700, 750 & 800 mm dia 100 metre
2308 Carriage of Plaster of paris tonne

input (Material) [17]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

2309 Carriage of Cast iron fittings tonne
2311 Carriage of Red bajri cum
2314 Carriage of Barbed wire tonne
2317 Carriage of Sludge cum
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre
2330 Carriage of C.I. pipes 500 mm dia 100 metre
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre
2335 Carriage of Jamuna sand cum
2341 Carriage of Pig lead tonne
2342 Carriage of solvent/ Diesel. quintal
2343 Carriage of ductile iron pipes (k7) 100 mm dia 100 metre
2344 Carriage of cast iron pipes 150 mm dia 100 metre
2345 Carriage of cast iron pipes 200 mm dia 100 metre
2346 Carriage of cast iron pipes 250 mm dia 100 metre
2347 Carriage of cast iron pipes 300 mm dia 100 metre
2348 Carriage of cast iron pipes 350 mm dia 100 metre
2349 Carriage of cast iron pipes 400 mm dia 100 metre
2350 Carriage of cast iron pipes 450 mm dia 100 metre
2351 Carriage of cast iron pipes 500 mm dia 100 metre
2352 Carriage of cast iron pipes 600 mm dia 100 metre
2353 Carriage of cast iron pipes 700 mm dia 100 metre
2355 Carriage of cast iron pipes 800 mm dia 100 metre
2356 Carriage of cast iron pipes 900 mm dia 100 metre
2357 Carriage of cast iron pipes 1000 mm dia 100 metre
2391 Strips-Aluminium fluted 3.15mm thick and 150mm wide metre
2392 Strips Aluminium fluted 3.15mm thick and 200mm wide metre Metre
2393 5mm thick Acrylic sheet (150mm wide) Metre
2406 Float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm). sqm

2407 Float glass sheet of nominal thickness 5 mm.(weight not less than 13.50 kg/sqm). sqm

2408 Float glass sheet of nominal thickness 8 mm sqm

2409 Float glass sheet of nominal thickness 6 mm sqm
2410 Float glass sheet of nominal thickness 10 mm sqm
2411 Float glass sheet of nominal thickness 12 mm sqm
2412 Ply wood 5 ply with commercial ply on both faces 6 mm thick sqm
2413 5 mm tinted glass sqm
2414 5 mm reflected glass sqm
2447 Hollock ballies 125 mm diameter metre
2449 Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with each
screws,bolts,nuts and washers complete
2451 Brass cupboard lock 6 levers (best make of approved quality) 40 mm size each
2452 Brass cupboard lock 6 levers (best make of approved quality) 50 mm size each
2453 Brass cupboard lock 6 levers (best make of approved quality) 65 mm size each
2454 Brass cupboard lock 6 levers (best make of approved quality) 75 mm size each
2455 Brass hanging type door stopper 150 mm each
2456 Hydraulic door closer bottle type M.S. body with necessary accessories and screws each
complete
2459 Anodised Aluminium hanging type door stopper each

input (Material) [18]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

2464 Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm with each
screws,bolts,nuts and washers complete
2465 Anodised Aluminium Casement stay 250 mm each
2466 Hollock wood in scantling 10 cudm
2467 Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42 mm with each
screws,bolts,nuts and washers complete
2468 Nickled Chromium Brass cupboard lock 40 mm size each
2469 Nickled Chromium Brass cupboard lock 50 mm size each
2470 Nickled Chromium Brass cupboard lock 65 mm size each
2471 Nickled Chromium Brass cupboard lock 75 mm size each
2480 Ply wood 5 ply with teak ply on both faces 9 mm thick sqm
2481 Ply wood 5 ply with teak ply on one face and commercial ply on another face 9 mm thick sqm

2482 6 mm thick commercial ply sqm

2483 9 mm thick commercial ply sqm
2484 9 mm teak ply BWR one side sqm
2485 9 mm teak ply BWR both side sqm
2486 12 mm thick commercial ply sqm
2487 12 mm teak ply BWR one side sqm
2488 12mm teak ply BWR both side sqm
2489 0.6 mm mica sqm
2490 0.8 mm mica sqm
2491 1 mm mica sqm
2492 4 mm thick commercial ply sqm
2493 4 mm teak ply BWR one side sqm
2494 6 mm teak ply BWR one side sqm
2495 12 mm thick Acoustical Board sqm
2496 12 mm thick one side laminated board Practical board (Phenol bonded) sqm
2497 50 mm glass whool sqm
2498 Hassian cloth with fibre glass sqm
2500 Extra for selected planks of second class deodarwood 10 cudm
2504 Kiln seasoning of timber cum
2505 Hollock wood in planks 10 cudm
2602 F.P.S. bricks class designation 75 1,000 Nos
2603 F.P.S. bricks class designation 50 1,000 Nos
2704 Aluminium Strip 40 mm wide and 2 mm thick kilogram
2710 White marble makranasecondquality plain veined stone pieces for crazy flooring quintal

2750 8 mm thick granite stone tiles (mirror polished of all shades) sqm
2751 8 mm thick marble tiles (polished) Raj Nagar sqm
2901 Stone Aggregate (Single size) : 100 mm nominal size cum
2902 Stone Aggregate (Single size) : 80 mm nominal size cum
2903 Stone chippings/ screenings 4.75 mm nominal size cum
2904 Stone chippings/ screenings 150 micron nominal size cum
2908 Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size cum
2909 Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size cum
2910 Stone chippings/ screenings 12.5/ 13.2 mm nominal size cum
2911 Stone chippings/ screenings 10/ 11.2 mm nominal size cum
2914 Solvent kilogram
2916 Paving Asphalt 80/100 penetration tonne
3002 Polyvinyle chloride sheet 400 micron thick sqm
3004 Stone ware spouts 100 mm dia 60 cm long each
3050 Galvanised steel corrugated sheets quintal
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each
3228 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and each
guard rail of standard size
3229 Vitreous china flat back wash basin 550x400 mm each
3311 C.I.sluice valve (with caps) class II : 100 mm dia each
3314 C.I.sluice valve (with caps) class II : 125 mm dia each
3317 C.I.sluice valve (with caps) class II : 150 mm dia each
3320 C.I.sluice valve (with caps) class II : 200 mm dia each
3321 C.I.sluice valve (with caps) class II : 250 mm dia each
3326 C.I.sluice valve (with caps) class II : 300 mm dia each

input (Material) [19]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

3617 C.P.brass union 40 mm dia each
3620 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:100mm dia each

3621 C.C.I.(spun) socketed soil, waste and vent pipe 1.80 metres long:75mm dia each
3624 S.C.I. S&S bends with access door100mm dia each
3625 S.C.I. S&S bends with access door75mm dia each
3628 S.C.I. S&S bend100mm dia each
3629 S.C.I. S&S bend75mm dia each
3634 S.C.I. S&S heel rest sanitary bend 100mm dia each
3635 S.C.I. S&S heel rest sanitary bend 75mm dia each
3640 S.C.I. S&S single equal junctions100x100x100 mm each
3641 S.C.I. S&S single equal junctions75x75x75 mm each
3644 S.C.I. S&S single equal junctions with access door 100x100x100 mm each
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm each
3650 S.C.I. S&S double equal junctions100x100x100x100 mm each
3651 S.C.I. S&S double equal junctions75x75x75x75 mm each
3654 S.C.I. S&S double equal junctions with access door 100x100x100x100 mm. each

3655 S.C.I. S&S double equal junctions with access door 75x75x75x75 mm. each
3660 S.C.I. S&S single unequal junctions100x100x75 mm each
3664 S.C.I. S&S single unequal junctions with access door 100x100x75 mm each
3670 S.C.I. S&S double unequal junctions100x100x75x75 mm each
3674 S.C.I. S&S double unequal junctions with access door 100x100x75x75 mm each

3681 S.C.I. S&S single equal invert branch of required degree 100x100x100 mm dia each

3682 S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia each
3685 S.C.I. S&S double equal invert branch of required degree100x100x100x100 mm dia each

3686 S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia each

3690 S.C.I. S&S single unequal invert branch of required degree100x100x75 mm dia each

3695 S.C.I. S&S double unequal invert branch of required degree100x100x75x75 mm dia each

3699 S.C.I. S&S, 75 mm offset for75 mm dia pipe each

3707 S.C.I. S&S, 150 mm offset for75 mm dia pipe each
3708 S.C.I. S&S, 150 mm offset for100 mm dia pipe each
3712 S.C.I. S&S, 114 mm offset for75 mm dia pipe each
3713 S.C.I. S&S, 114 mm offset for100 mm dia pipe each
3716 S.C.I. S&S, 152 mm offset for75 mm dia pipe each
3717 S.C.I. S&S, 152 mm offset for100 mm dia pipe each
3728 S.C.I. S&S door pieces 100 mm dia each
3729 S.C.I. S&S door pieces 75 mm dia each
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each
3738 S.C.I. S&S, collars 100 mm each
3739 S.C.I. S&S, collars 75 mm each
3746 S.C.I. S&S, 76 mm offset for75 mm dia pipe each
3747 S.C.I. S&S, 76 mm offset for100 mm dia pipe each
3749 Vitreous china toilet paper holder of standard size each
3860 560 mm dia cover with frame (Heavy duty) each
3861 560 mm dia cover without frame (Heavy duty) each
4006 Pressed steel door frames (mild steel sheet 1.25mm) Profile "A" metre
4007 Pressed steel door frames (mild steel sheet 1.25mm) Profile "B" metre
4008 Pressed steel door frames (mild steel sheet 1.25mm) Profile "C" metre
4009 Mild steel tubes hot finished welded type kilogram
4010 Mild steel tubes hot finished seamless type kilogram
4011 Mild steel tubes electric resistant or inductionbutt welded kilogram
4012 Circular C.I. Box for ceiling fan each
4013 Pully 40 mm dia each
4014 Ready made steel door with necessary hinges, lugs and glazing clips excluding other sqm
fittings & their fixing

input (Material) [20]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

4201 Aluminium primer litre
4202 Red oxide Zinc chromate primer litre
4203 Copper acetate kilogram
4204 Hydrochloric acid kilogram
4205 Copper chloride kilogram
4206 Copper nitrate kilogram
4207 Ammonium chloride kilogram
5001 Mobil oil litre
6001 White marble slab Makrana second quality plain veined 18 mm thick sqm
6007 Pink marble slab plain 18mm thick sqm
6010 Udaypur green marble slab plain 18mm thick sqm
6019 Black Zebra marble slab plain 18mm thick sqm
6501 Sand zone V () cum
6502 Sand as per Table 1500. 5 cum
7001 Brass 100mm mortice latch and lock with6 levers without pair of handles each
7003 Pair of Anodised Aluminium lever handles for 100mm mortice latch and lock each
7004 Vitreous china flat back wash basin 450x300 mm each
7005 Vitreous china 10 litres low level cistern without fittings each
7006 Vitreous china 10 litres low level cistern with fittings each
7008 F.P.S. clay fly ash bricks class designation 75 1,000 Nos
7009 Gypsum board sqm
7010 Ceiling sections metre
7011 Perimetre channel metre
7012 Intermediate channel metre
7013 Ceiling angle metre
7014 Connecting clips each
7015 Soffit cleat each
7016 Joint filler kilogram
7017 Joint finisher kilogram
7018 Joint tape roll roll
7019 Dash fastner/ chemical fastener each
7020 All drive screws ( for gypsum board) 100 Nos
7021 Primer ( for gypsum board) litre
7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. litre
7023 Chromium plated brackets ( curtain rods) each
7024 Acid Proof cement tonne
7027 M.S. Butt hinges 125x90x4 mm 10 Nos
7029 Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia. of wire 0.63 sqm
mm
7032 Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) sqm

7034 Nickle plated M.S. pipe 20 mm dia. metre

7035 Nickle plated M.S. Brackets for curtain rod 20 mm each
7036 Nickle plated M.S. Brackets for curtain rod 25 mm each
7040 Oxidised mild steel screws 35 mm 100 Nos
7042 Mild steel conduit pipe (heavy type) ISI marked-20 mm dia. metre
7043 Mild steel conduit pipe (heavy type) ISI marked-25 mm dia. metre
7044 Rolling shutters of 80x0.90 mm laths sqm
7045 Rolling shutters of 80x1.2 mm laths sqm
7046 Top cover of Rolling shutters 0.90 mm thick metre
7047 Top cover of Rolling shutters 1.20 mm thick metre
7048 Rawl plug 50 mm (designation 10 no.) each
7049 Teak wood lipping of size 25x3 mm in pelmets metre
7055 Flat pressed 3 layer and graded particle board (medium density) Grade 1 conforming to IS sqm
: 3087 - 18 mm thick
7056 Aluminium tee channel (heavy duty) with rollers and stop end metre
7059 Aluminium hanging floor door stopper with twin rubber & stopper each
7060 Hydraulic door closer tubular type Aluminium section body each
7063 Oxidised M.S.casement stay (straight peg type) 300 mm not less than 0.33 kg each

7064 Oxidised M.S.casement stay (straight peg type) 250 mm not less than 0.28 kg each

input (Material) [21]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7065 Oxidised M.S.casement stay (straight peg type) 200 mm not less than 0.24 kg each

7068 Extra for providing grilled rolling shutters with 8 mm dia M.S. rod sqm
7070 Chequered precast cement concrete tiles 22mm thick using marble chips of size 6mm - sqm
Light shade using white cement
7071 White marble Raj Nagar plain 20 mm thick (slab area 0.10 sqm to 0.20 sqm) sqm

7077 Acid and alkali resistant tiles 300x300 mm size, 10 mm thick 10 Nos
7087 S.C.I. Tee 150 mm each
7090 Expanded polystyrene type N- Normal sqm
7091 Expanded polystyrene type - SE sqm
7092 Stainless steel kitchen sink Size 18x16x6 inches each
7093 Stainless steel kitchen sink Size 22x18x7 inches each
7094 Stainless steel kitchen sink Size 24x18x8 inches each
7095 Stainless steel kitchen sink - with drain board bowl depth 250 mm. each
7096 Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 225 mm. each

7097 Stainlees steel kitchen sink - with drain board 510 x 1040mm bowl depth 200 mm. each

7098 Stainless steel kitchen sink - with drain board 510x1040mm bowl depth 178 mm each

7099 Stainless steel kitchen sink Size 37x18x7 inches with drain board each
7100 Stainless steel kitchen sink Size 45x20x8 inches with drain board each
7101 Stainless steel kitchen sink - without drain board 610x510mm bowl depth 200 mm each

7102 Stainless steel kitchen sink - without drain board 610x460mm bowl depth 200 mm. each

7103 Stainless steel kitchen sink - without drain board 470x420mm bowl depth 178 mm each

7104 Coloured Orissa pattern W.C. pan 580x440 mm each

7105 Coloured Pedestal type W.C. pan (European type) each
7106 Coloured Vitreous china 10 lit. low level cistern each
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan each
7108 Non-breakable of other approved make Black.seat in European W.C. pan each

7109 Non-breakable of other approved make White.seat in European W.C. pan each

7110 Non-breakable of other approved make Coloured.seat in European W.C. pan each

7111 C.P. lugs for toilet seat cover.

7112 Circular shape 500 mm dia Mirror with Plastic moulded frame each
7113 Rectangular shape 500x400 mm Mirror with Plastic moulded frame each
7114 Ovel shape 450x350 mm (outer dimensions) Mirror with Plastic moulded frame each

7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each
7116 Hard board 6 mm thick sqm
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than each
700 mm i/c PVC waste fittings
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than each
700 mm i/c PVC waste fittings
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not each
less than 700 mm i/c PVC waste fittings
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not each
less than 700 mm i/c PVC waste fittings
7123 Coloured High density polythylene/ poly propylene 10 lit. (full flush) capacity controlled each
low level flushing cistern with fittings
7126 White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with each
all fittings
7127 Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern each
with all fittings
7128 S.W. intercepting trap 100 mm dia each
7129 S.W. intercepting trap 150 mm dia each

input (Material) [22]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover with frame - L.D. - 25 each

7131 Square shape 350x350 mm precast R.C.C. manhole cover with frame - L.D. - 25 each

7132 Circular shape 450 mm dia precast R.C.C. manhole cover with frame - L.D. - 25 each

7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D. - 10 each

7134 Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. - 10 each

7135 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - H.D. - 20 each

7136 Circular shape 560 mm dia precast R.C.C. manhole cover with frame - E.H.D. - 35 each

7137 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three
layer, graded particle board (FPT-I) as per IS:3087-1985 bonded with BWP type synthe

7139 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of 12 mm thick both sides prelaminated type-I, medium
density flat pressed three layer, graded particle board (FPT-I) as per IS:3087-1985 bonded
w
7143 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of 12 mm thick one side prelaminated type-I, and other side
balancing lamination, medium density flat pressed three layer, graded particle board.

7151 Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of sheet glass using 10 kg/ sqm glass panes

7154 Factory made 35 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4
mm on both directions with wire of dia 0.63 mm

7155 Factory made 30 mm thick shutters with laminated veneer lumber styles rails as per sqm
TADS IS:1995 and panels of galvanised wire gauge with average width of aperture 1.4
mm on both directions with wire of dia 0.63 mm

7157 Laminated veneer lumber confirming to TADSS IS:1995 manufactured in factory in 10 cudm
frames of doors, windows
7181 C.I. pile shoe kilogram
7182 M.S. clamps for pile shoe kilogram
7183 Bentonite tonne
7184 Oxidised M.S. safety chain (weighing not less than 450 gms) for door each
7187 C.I. grating 150 mm dia. (Weighing not less than 440 gm) each
7188 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 75 mm dia. metre

7189 U-PVC pipes (working pressure 4 kg / cm^2) Single socketed pipe 110 mm dia. metre

7190 U-PVC pipes (working pressure 4 kg / cm^2) Rubber (Seal) Ring 75 mm dia. each

7191 U-PVC pipes (working pressure 4 kg / cm^2) Rubber (Seal) Ring 110 mm dia. each

7192 UPVC coupler for UPVC drainage pipes 75 mm each

7193 UPVC coupler for UPVC drainage pipes 110 mm each
7194 UPVC pushfit coupler (single) 75 mm thick each
7195 UPVC pushfit coupler (single) 110 mm thick each
7196 UPVC single equal Tee (with door) 75x75x75 mm each
7197 UPVC single equal Tee (with door) 110x110x110 mm each
7198 UPVC single equal Tee (with door) 75x75x75 mm each
7199 UPVC single equal Tee (with door) 110x110x110 mm each
7208 UPVC bend 87.5o 75 mm bend each
7209 UPVC bend 87.5o 110 mm bend each
7212 UPVC plain shoe 75 mm bend each

input (Material) [23]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7213 UPVC plain shoe 110 mm bend each
7214 UPVC pipe clip 75 mm bend each
7215 UPVC pipe clip 110 mm bend each
7231 Resin Bonded Glass wool 16 kg/m³ 50 mm thick sqm
7232 Resin Bonded Glass wool 24 kg/m³ 50 mm thick sqm
7233 Fibre glass tissue reinforcement Type II Grade I sqm
7236 Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement sqm

7237 Precast chequered cement tiles 22 mm thick medium shade using 50% white cement, 50% sqm
ordinary cement
7239 Epoxy paint litre
7240 Fire retardant paint litre
7241 Melamine polish litre
7242 Expoxy primer for steel lt
7243 Expoxy harder and resin kg
7244 Table rubbed polished stone 18 mm thick (75x50cm) Agaria Marble stone - 18 mm thick sqm

7245 Table rubbed polished stone 18mm thick (75x50cm) Granite stone - 18mm thick sqm

7246 Verticle load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including per test
installation of loading platform and prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification a

7247 Verticle load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including per test
installation of loading platform and prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification &

7248 Verticle load testing (INITIAL) of piles in accordance with IS : 2911 (Part-IV) including per test
installation of loading platform and prepration of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification &

7249 Cyclic verticle load testing of piles in accordance with IS : 2911 (Part-IV) including per test
prepration of pile head etc. for Single pile upto 50 tonne capacity
7250 Cyclic verticle load testing of piles in accordance with IS : 2911 (Part-IV) including per test
prepration of pile head etc. forSingle pile above 50 tonne capacity pile and upto 100 tonne
capacity pile
7251 Cyclic verticle load testing of piles in accordance with IS : 2911 (Part-IV) including per test
prepration of pile head etc. forGroup of two piles upto 50 tonne capacity each

7252 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining per test
safe allowable lateral load on pile. Upto 50 tonne capacity
7253 Lateral load testing of single pile in accordance with IS : 2911 part -IV for determining per test
safe allowable lateral load on pile. Above 50 tonne capacity
7254 Hardening compound litre
7255 Road marking paint (spirit based) litre
7256 Superior quality road marking paint litre
7257 C.P. Brass bibcock 15 mm each
7258 C.P. Brass long nose bibcock 15 mm each
7259 C.P. Brass long body bibcock 15 mm each
7260 C.P. Brass stop cock (concealed) 15 mm each
7261 C.P. Brass angle valve 15 mm each
7266 Pressed clay tiles 1,000 Nos
7267 Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) (600x600x12 each
mm)
7268 Semi perforated ceiling tiles (600x600x12 mm) each
7269 25 mm thick particle board sqm
7270 30 mm thick prelaminated flush door shutter sqm
7271 IInd class teak wood lipping 25 mm wide x 12 mm thick metre
7272 25 mm thick melamine faced prelaminated three layer particle board sqm
7295 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, upto 1500 cm2 sqm

7296 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, above 1500 upto sqm
3600 cm2

input (Material) [24]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7297 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) 18 mm thick slab, above 3600 cm2 sqm

7298 Granite South Red 18 mm thick slab, upto 1500 cm2 sqm
7299 Granite South Red 18 mm thick slab, above 1500 upto 3600 cm2 sqm
7300 Granite South Red 18 mm thick slab, above 3600 cm2 sqm
7301 South Zed Black 18 mm thick slab, upto 1500 cm2 sqm
7302 South Zed Black 18 mm thick slab, above 1500 upto 3600 cm2 sqm
7303 South Zed Black 18 mm thick slab, above 3600 cm2 sqm
7304 Good quality South Black 18 mm thick slab, upto 1500 cm2 sqm
7305 Good quality South Black 18 mm thick slab, above 1500 upto 3600 cm2 sqm
7306 Aluminium T or L sections kilogram
7307 For flush door shutters Extra for providing teak veneering on one side instead of sqm
commercial veneering
7308 Good quality South Black 18 mm thick slab, above 3600 cm2 sqm
7309 Paving Asphalt 60/70 penetration tonne
7312 Expandable fastner with plastic sleeve and M.S. screws. 25 mm long each
7313 Expandable fastner with plastic sleeve and M.S. screws. 32 mm long each
7314 Expandable fastner with plastic sleeve and M.S. screws. 40 mm long each
7315 Expandable fastner with plastic sleeve and M.S. screws. 50 mm long each
7318 Plasticizer / super plasticizer kilogram
7319 Wall form panel 1250x500 mm each
7320 Tie bolt 12 mm dia 100 mm length each
7321 Tie bolt 12 mm dia 150 mm length each
7322 Tie bolt 20 mm dia 150 mm length each
7323 Tie bolt 20 mm dia 225 mm length each
7324 Spring coil 12 mm each
7325 Plastic cone 12 mm dia each
7326 Corner angle 45x45x5 mm 1.50 m long each
7327 100 mm channel shoulder 2.5 m long each
7328 Double clip ( bridge clip) each
7329 Single clip each
7330 M.S. tube 40 mm dia metre
7331 Wall form panel 1250x450 mm each
7332 Corner angle 45x45x5 m 2.50 m long each
7333 Column clamp 450x1070 m each
7334 Prop 2 m ( 2-3.5m) each
7335 Binding wire kilogram
7338 Gun metal cramp kilogram
7339 Stainless steel cramp kilogram
7340 Stainless steel pin . kg
7342 Adjustable span ESO+SI (2.35-3.40) each
7343 Adjustable telescopic prop 3 m (2.02-3.75 m) each
7344 Beam clamp 300-380 mm (450-1070 mm) each set
7345 Prop 4 m each
7346 Double coupler each
7347 Cadmium plated full threaded steel screws (30x4 mm dia.) 100 Nos
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos
7349 12 mm M.S. 'U' beading metre
7354 Plastic encapsuled M.S. foot rest 30x20x15 cm each
7358 Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories each
and flush pipe)
7359 P.V.C. automatic flushing cistern 5 lts capacity each
7361 P.V.C. automatic flushing cistern 10 lts capacity each
7363 15 mm C.P. brass tap with elbow operation lever each
7364 White glazed fire clay draining board 600x450x25 mm each
7366 Glass reinforced Gyp sum ( GRG) board 8.5 mm thick sqm
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm metre

7369 Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm metre
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal each

7376 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two each
lipped urinals

input (Material) [25]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7377 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three each
lipped urinals
7378 G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four each
lipped urinals
7379 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back each
450x375x350 mm with waste fittings as per IS : 2556
7380 Precast R.C.C. grating with frame 500x450 mm horizontal grating each
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each
7382 Bitumen emulsion rapid setting (R.S.) confirming to IS : 8887-1995 tonne
7385 3 mm thick translucent white acrylic plastic sheet sqm
7386 12 thick particle board ceiling tile sqm
7388 Dash hold fastener 12.5 mm dia, 40 mm long with 6 mm dia bolt each
7389 Anodising 15 microns on aluminium sections kilogram
7390 Neoprin/EPDM rubber gasket metre
7391 Anodising 25 microns on aluminium sections kilogram
7392 Epoxy powder coating 50 microns on aluminium sections. kilogram
7393 Polyester powder coating 50 microns on aluminium sections kilogram
7394 Double action hydraulic floor spring with stainless steel cover plate each
7395 6 mm dia. G.I. adjustable hangers including clips (upto 1.2 m length) each
7396 Double action hydraulic floor spring with brass cover plate each
7397 Base jack each
7398 Challies each
7399 Cup lock each
7400 15 mm PTMT bib cock each
7401 15 mm PTMT bib cockwith flange (fancy) each
7402 15 mm PTMT bib cock long body with flange each
7403 15 mm dia PTMT stop cock (male thread) each
7405 20 mm dia. PTMT stop cock each
7406 PTMT pillar cock each
7407 PTMT push cock 15 mm dia. each
7408 PTMT push cock 12 mm dia. 20 mm BSP each
7409 PTMT grating 100 mm dia. each
7410 PTMT pillar cock (fancy) 15 mm foam flow. each
7411 125 mm grating withwaste hole each
7412 Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia. each
(110 gm)
7415 Double acting air valve 50 mm each
7416 Double acting air valve 80 mm each
7417 Double acting air valve 100 mm each
7418 Water meter (including testing charges) 80 mm each
7419 Water meter (including testing charges) 100 mm each
7420 Water meter (including testing charges) 150 mm each
7421 Water meter (including testing charges) 200 mm each
7422 Dirt box srainer 80 mm each
7423 Dirt box srainer 100 mm each
7424 Dirt box srainer 150 mm each
7425 Dirt box srainer 200 mm each
7426 Cat's eye each
7427 Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) metre
7428 Water stops Dumb bell with central bulb metre
7429 Kickers metre
7430 Wedge expansion hold fastner 1/4" or 6 mm each
7431 Wedge expansion hold fastner 3/8" or 10 mm each
7432 Wedge expansion hold fastner 1/2" or 12 mm each
7439 8mm thick (mirror polished tiles machine cut edge) Raj Nagar white sqm
7442 Wheel 75 mm dia. 40 mm wide each
7443 Aluminium single cleat of size 30x32x3 each
7444 Aluminium grip strip of size 50x12x2 each
7445 25 mm prelaminated flush door both side decorative sqm
7449 Aluminium U beading kilogram
7451 Glass sheet (Pin headed) 4 mm thick sqm
7452 Raj nagar I quality plain white marble (table rubbed and polished) 18 mm thick upto 1500 sqm
cm2

input (Material) [26]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7453 Raj nagar plain I quality white marble (table rubbed and polished) 18 mm thick above sqm
1500 and upto 3600 cm2
7454 Raj nagar plain I quality white marble (table rubbed and polished) 18 mm thick above sqm
3600 cm2
7455 Makrana Adanga 15-18mm upto 1500 cm2 sqm
7456 Makrana Adanga 15-18mm above 1500 and upto 3600 cm2 sqm
7457 Makrana Adanga 15-18mm above 3600 cm2 sqm
7458 Keseriaji/ Abu Ambaji (Green Marble)15-18mm upto 1500 cm2 sqm
7459 Keseriaji/ Abu Ambaji (Green Marble)15-18mm sqm
above 1500 and upto 3600 cm2
7460 Keseriaji/ Abu Ambaji (Green Marble) sqm
15-18mm above 3600 cm2
7461 Bhaislana,Abu,Kishangarh Zebra (Black Marble) sqm
5-18mm upto 1500 cm2
7462 Bhaislana,Abu,Kishangarh Zebra (Black Marble) sqm
15-18mm above 1500 and upto 3600 cm2
7463 Bhaislana,Abu,Kishangarh Zebra (Black Marble) sqm
15-18mm above 3600 cm2
7466 Second class deodar teak wood lipping 30 mm widthx12mm metre
7468 Veneered particle board with commercial veneering on both sides 12 mm thick sqm

7477 Prelaminated particle board with one side decorative and other side balancing lamination, sqm
flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade)12 mm thick
7478 Prelaminated particle board with one side decorative and other side balancing lamination, sqm
flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade)18 mm thick
7479 Prelaminated particle board with one side decorative and other side balancing lamination, sqm
flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS : 12823
(exterior grade)25 mm thick
7480 Prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & sqm
graded (medium density) Grade I, Type II conforming to IS : 12823 (exterior grade)12
mm thick
7485 Oxidised M. S. hinges finished with nickel plating 50 mm (Over all width) metre
7486 Oxidised M. S. hinges finished with nickel plating 65 mm (Over all width) metre
7491 PTMT Waste Coupling 31/32MM Each
7492 PTMT Waste Coupling 38/40MM Each
7493 PTMT Bottle Trap 31/32MM Each
7494 PTMT Bottle Trap 38/40MM Each
7495 PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each

7496 PTMT Ball Cock 20mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each

7497 PTMT Ball Cock 25mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each

7498 PTMT Ball Cock 40mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each

7499 PTMT Ball Cock 50mm Complete with Epoxy Coated Aluminium Road & H.D. Ball Each

7500 PTMT Angle Stop cock with Flenge 15mm Each

7501 PTMT Swiveling shower 15mm Each
7503 PTMT Liquid Soap Container of 400ml capacity Each
7504 PTMT Towel Ring 215xd200x37mm Each
7505 PTMT Towel Rail (450MM) Each
7506 PTMT Towel Rail (600MM) Each
7507 PTMT Shelf 450x124x36mm Each
7508 PTMT Urinal Spreader 15MM Each
7509 PTMT Soap Dish/Holder 138x102x75mm Each
7512 PTMT handle 125x34x24mm Each
7513 PTMT handle 150x34x24mm Each
7514 PTMT butt hinges 75x60x10mm Each
7515 PTMT butt hinges 100x75x10mm Each
7516 PTMT Tower bolt 152x42x18mm Each

input (Material) [27]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7517 PTMT Tower bolt 202x42x18mm Each
7518 PTMT door catcher 72x42mm Each
7519 Synthetic Material(PTMT) of approved quality/make size 525 x90 x 75mm Each
7520 Synthetic Material(PTMT) of approved quality/make size 675 x90 x 75mm Each
7521 Synthetic Material (PTMT) Towel Ring of approved quality/make. Each
7552 Coir veneered board 4mm thick sqm
7553 Coir veneered board 6mm thick sqm
7555 Coir veneered board 12mm thick sqm
7556 Coir veneered board 18mm thick sqm
7557 Jalore (P-white / S-white/ Rosy Pink colour),Up to 1500 Cm 2 Tiles sqm
7558 Jalore (P-white / S-white/ Rosy Pink colour),1501 Cm 2 to 3600 Cm2 Tiles sqm
7559 Jalore (P-white / S-white/ Rosy Pink colour),Above 3601 Cm 2 Slabs sqm
7560 Rajasthan Black,Up to 1500 Cm Tiles
2
sqm
7561 Rajasthan Black,1501 Cm2 to 3600 Cm2 Tiles sqm
7562 Rajasthan Black,Above 3601 Cm 2 Slabs
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100mm dia Metre
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150mm dia Metre
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 200mm dia Metre
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250mm dia Metre
7655 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300mm dia Metre
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350mm dia Metre
7657 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400mm dia Metre
7658 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 450mm dia Metre
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500mm dia Metre
7660 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600mm dia Metre
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700mm dia Metre
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750mm dia Metre
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800mm dia Metre
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900mm dia Metre
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000mm dia Metre
7666 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 100mm dia Each
7668 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 150mm dia Each
7669 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 200mm dia Each
7670 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 250mm dia Each
7671 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 300mm dia Each
7672 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 350mm dia Each
7673 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 400mm dia Each
7674 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 450mm dia Each
7675 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 500mm dia Each
7676 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 600mm dia Each
7677 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 700mm dia Each
7678 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 750mm dia Each
7679 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 800mm dia Each
7680 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 900mm dia Each
7681 Ruber Gaskets Conforming to I.S 5382 of S.B.R quality 1000mm dia Each
7682 Ductile Iron K - 12 specials suitale for push on jointing upto 600mm dia Quintal
7683 Ductile Iron K - 12 specials suitale for push on jointing over 600mm dia Quintal
7684 Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - upto 600mm dia Quintal

7685 Ductile Iron Specials suitable for mechancial jointing as per I.S. 9523 over 600mm dia Quintal

7686 Ductile Iron Pipe Class K-9 flanges and welding 100mm dia Metre
7687 Ductile Iron Pipe Class K-9 flanges and welding 150 dia metre
7688 Ductile Iron Pipe Class K-9 flanges and welding 200mm dia Metre
7689 Ductile Iron Pipe Class K-9 flanges and welding 250mm dia Metre
7690 Ductile Iron Pipe Class K-9 flanges and welding 300mm dia metre
7691 Ductile Iron Pipe Class K-9 flanges and welding 350mm dia Metre
7692 Ductile Iron Pipe Class K-9 flanges and welding 400mm dia Metre
7693 Ductile Iron Pipe Class K-9 flanges and welding 450mm dia Metre
7694 Ductile Iron Pipe Class K-9 flanges and welding 500mm dia Metre
7695 Ductile Iron Pipe Class K-9 flanges and welding 600mm dia Metre
7696 Ductile Iron Pipe Class K-9 flanges and welding 700mm dia Metre

input (Material) [28]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7697 S&S Centrifugally (Spun) C.I. Pipe class 75mm dia (300 cm long) Each
7698 S&S Centrifugally (Spun) C.I. Pipe class 100mm dia (300 cm long) Each
7699 S&S Centrifugally (Spun) C.I. Pipe class 150mm dia (300 cm long) Each
7700 S&S Centrifugally (Spun) C.I. Pipe class LA 200mm dia Metre
7701 S&S Centrifugally (Spun) C.I. Pipe class LA 250mm dia Metre
7702 S&S Centrifugally (Spun) C.I. Pipe class LA 300mm dia Metre
7703 S&S Centrifugally (Spun) C.I. Pipe class LA 350mm dia metre
7704 S&S Centrifugally (Spun) C.I. Pipe class LA 400mm dia Metre
7705 S&S Centrifugally (Spun) C.I. Pipe class LA 450mm dia Metre
7706 S&S Centrifugally (Spun) C.I. Pipe class LA 500mm dia Metre
7707 S&S Centrifugally (Spun) C.I. Pipe class LA 600mm dia Metre
7708 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing upto Quintal
300mm dia
7709 S&S Centrifugally (Spun) C.I. Pipe Specials as per IS 1538 suitable for lead jointing over Quintal
300mm dia
7710 S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. Quintal
13382 upto 300mm dia
7711 S&S Centrifugally (Spun) C.I. Pipe Specials suitabe for mechanical joint as per IS 13382 Quintal
over 300mm dia
7712 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 100mm dia
7713 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 150mm dia
7714 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 200mm dia
7715 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 250mm dia
7716 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 300mm dia
7717 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 350mm dia
7718 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. metre
1536, - 400mm dia
7719 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 450mm dia
7720 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. metre
1536, - 500mm dia
7721 Screwed double flanged centrigually cast (spun) C.I. Pipe of Class B conforming to I.S. Metre
1536, - 600mm dia
7722 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 100mm dia Metre
7723 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 150mm dia Metre
7724 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 200mm dia Metre
7725 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 250mm dia Metre
7726 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 300mm dia Metre
7727 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 350mm dia Metre
7728 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 400mm dia Metre
7729 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 450mm dia Metre
7730 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 500mm dia Metre
7731 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 600mm dia metre
7732 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 700mm dia Metre
7733 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 800mm dia Metre
7734 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 900mm dia metre
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000mm dia metre
7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 - 1988 1,000 Nos
7737 Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894-1989 1,000 Nos
7738 Calcium Silicate Bricks machine moulded confirming to I.S. 4139 - 1989 1,000 Nos
7739 Modified Bitumen Refinary produced CRMB - 55 Tonne
7741 Modified Bitumen Refinary produced CRMB - 60 tonne
7742 Bitumen emulsion medium setting (M.S.) confirming to IS : 8887-1995 tonne
7750 Toilet shelf W.V.C. Size 300mm Each
7751 Toilet shelf W.V.C. Size 500mm Each
7752 Toilet shelf Synthetic Material with tumbler size 470 x 114 x 36mm Each

input (Material) [29]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7753 Toilet shelf Hard Plastic of superior quality size 590x140mm Each
7754 Toilet shelf Acrylic shelf on C.P. brass casted brackets & guard rail of superior quality Each
size 550x125mm
7755 Toilet Glass Shelf with edges rounded off Anodised Aluminium angle frame & C.P. brass Each
brackets & guard rail size 600x120mm
7756 C.P. brass Towel Rail elbow type with concealed screws size 450mm (Heavy duty). Each

7757 C.P. brass Towel Rail elbow type with concealed screws size 600 mm (Heavy duty). Each

7758 C.P. brass towel rail with brackets 450 x 20mm. Each
7759 C.P. brass towel rail with brackets 600 x 20mm. Each
7760 WVC (1stquality, ISI Marked) of approved make. Recessed towel Hanger size 108 x Each
108mm.
7761 C.P. Brass Towel Ring revolving type Each
7773 Colored interlocking C.C. paver Block Sqm
7774 Autoclaved Aerated Concrete (AAC) blocks Grade-I of density 551 to 650 kg/cum Cum

7799 Broken ceramic tiles Kg

7800 Ceramic Glazed Tiles Ist quality size 200 mm x 300 mm in white, gray, ivory, fume red Sq.m.
brown, light green, light blue and other light shades
7801 Ceramic Mat finished Tiles Ist quality size 300 mm x 300 mm in white, gray, ivory, Sq.m.
fume red brown, light green, light blue and other light shades
7802 Ceramic Glazed Tiles Ist quality 300 x 300 in all shades designs except White, Ivory, Sq.m.
Grey, Fuem Red Brown etc.
7803 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more in all shades designs Sq.m.
White, Ivory, Grey, Fuem Red Brown etc.
7804 Rectified Ceramic Glazed Tiles Ist quality 300x300mm or more in all shades designs Sq.m.
except White, Ivory, Grey, Fuem Red Brown etc.
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724mm X 578mm each

7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X 355mm each
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X 345mm each
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each
7810 75 mm wide decorative border Rm
7811 Motive 200x200 mm Each
7812 Motive 200x300 mm Each
7813 Motive 300x300 mm Each
7814 Motive 300x450 mm Each
7815 Motive 300x600 mm Each
7825 Ceramic Glazed Vitrified Tiles Size : 600mm x 1200mm Sqm
7826 Ceramic Glazed Vitrified Tiles Size : 800mm x 1200mm Sqm
7827 Ceramic Glazed Vitrified Tiles Size : 196mm x 1215mm Sqm
7828 Ist Qulality MAT and glossy finished ceramic tiles Size : 250mm x 375mm Sqm
7829 Ist Qulality MAT and glossy finished ceramic tiles Size : 300mm x 450mm Sqm
7830 Ist Qulality MAT and glossy finished ceramic tiles Size : 300mm x 600mm Sqm
7831 Ist Qulality MAT and glossy finished ceramic tiles Size : 250mm x 1000mm Sqm
7832 Ist quality heavy duty Vitrified polished digital tile size:298mmX 298mm Sqm
7833 Ist quality heavy duty Vitrified polished digital tile size:300mmX450 mm Sqm
7834 Ist quality heavy duty Vitrified polished digital tile size:600mmX600 mm Sqm
7835 Ist quality MAT & GLOSSY finished ceramic tile 600mm x 600mm Sqm
7850 Agaria White marble slab plain 18mm thick sqm
7857 P.T.M.T. Grating square slit 150mm each
7858 P.T.M.T. Urinal cock 15mm dia each
7859 P.T.M.T. Bib cock with nozzle 15mm each
7861 P.T.M.T. Stop cock (concealed) 15mm each
7862 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts each

7863 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts each

7864 P.T.M.T. extension nipple 15mm each

7865 P.T.M.T. extension nipple 20mm each
7866 P.T.M.T. extension nipple 25mm each

input (Material) [30]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

7896 Vitrified tile Sqm
7900 Modular bricks of class designation 100 1,000 Nos
7901 Machine moulded perforated FPS bricks of class designation 125 1,000 Nos
7902 Machine moulded modular perforated bricks of class designation 125 1,000 Nos
7903 Machine moulded FPS bricks of class designation 125 1,000 Nos
7904 Machine moulded tile bricks of class designation 125 1,000 Nos
8001 24 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections sqm
in white, grey or wooden finish
8002 30 mm thick Factory made shutters with frame, rails and panels of PVC extruded sections sqm
in white, grey or wooden finish
8003 Factory made PVC rigid foam panelled shutter sqm
8004 Factory made PVC rigid foam panelled shutter as per IS : 4020 sqm

8006 Factory made PVC rigid foam sheet 1mm thick sqm
8007 Factory made PVC rigid foam sheet 5mm thick sqm
8008 Factory made prelaminated PVC rigid foam sheet 5mm thick sqm
8010 48mmX40mmX1.5mm thick Factory made door frame of PVC extruded sections in metre
white, grey or wooden finish
8011 Factory made door frame PVC extruded sheet i/c carriage metre
8012 Adhesive solvent cement kg
8100 Powder coated M.S. butt hinges 100mm X58mmX1.9mm 10 Nos
8200 A.P.P. modified polymeric felt (two layers) 1.5 mm thick sqm
8201 A.P.P. modified polymeric felt (two layers) 2 mm thick sqm
8203 A.P.P. modified 2 mm thick membrance reinforced with glass fibre matt sqm
8204 A.P.P. modified 3 mm thick membrance reinforced with glass fibre matt sqm
8205 A.P.P. modified 3 mm thick membrance reinforced with polyster matt sqm
8206 Bitumen primer for bitumen membrance litre
8207 Geotextile 120 gsm membrance sqm
8210 Stainless steel screws 50 mm 100 Nos
8211 Stainless steel screws 40 mm 100 Nos
8212 Stainless steel screws 30 mm 100 Nos
8214 Stainless steel screws 20 mm 100 Nos
8215 Stainless steel butt hinges 125x64x1.9 mm IS : 12817 marked 10 Nos
8216 Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked 10 Nos
8217 Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked 10 Nos
8218 Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked 10 Nos
8219 Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS : 12817 marked 10 Nos

8220 Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked 10 Nos

8221 Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked 10 Nos

8222 M.S. heavy weight but hinges 125x90x4.0mm IS : 1341 marked. 10 10 Nos
8223 M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked 10 10 Nos.
8224 M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked 10 10 Nos
8225 M.S. heavy weight butt hinges 50x40x2.5 mm IS : 1341 marked 10 10 Nos
8300 1216 mm PE-AL-PE Composit pressure pipe Metre
8301 1620 mm PE-AL-PE Composit pressure pipe Metre
8302 2025 mm PE-AL-PE Composit pressure pipe Metre
8303 2532 mm PE-AL-PE Composit pressure pipe Metre
8304 3240 mm PE-AL-PE Composit pressure pipe Metre
8305 4050 mm PE-AL-PE Composit pressure pipe Metre
8501 Polymer modified cementation coating kilogram
8502 Fibre glass cloth sqm
8504 Multi surface paint litre
8505 Acrylic exterior paint litre
8506 Premium Acrylic exterior paint litre
8507 Textured exterior paint litre
8508 Primer for cement paint litre
8509 Special Primer litre
8510 Metal Primer litre
8520 Edge blocks 60 mx2 cum

input (Material) [31]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8521 inter–locking block , M-30, 60 mm thick ,Category A Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8522 inter–locking block , M-30, 60 mm thick,Category ‘B’ Denated only two side like I,Z,T sqm
shape etc. as per IRC SP 63:2004
8523 inter–locking block , M-30, 60 mm thick ,Category ‘C’not denated on any its faces like sqm
Hexagon, Rectangular, square shape as per IRC SP 63:2004
8524 inter–locking block , M-35, 60 mm thick ,Category A Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8525 inter–locking block , M-35, 60 mm thick ,Category B Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8526 inter–locking block , M-35, 60 mm thick ,Category C Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8527 inter–locking block , M-40, 80 mm thick ,Category A Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8528 inter–locking block , M-40, 80 mm thick ,Category B Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8529 inter–locking block , M-40, 80 mm thick ,Category C Denated units to key into each other sqm
on four faces zigzag shape as per IRC SP 63:2004
8530 inter–locking block , M-50, 100 mm thick ,Category A Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8531 inter–locking block , M-50, 100 mm thick ,Category B Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8532 inter–locking block , M-50, 100 mm thick ,Category C Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8533 inter–locking block , M-55, 120 mm thick ,Category A Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8534 inter–locking block , M-55, 120 mm thick ,Category B Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8535 inter–locking block , M-55, 120 mm thick ,Category C Denated units to key into each sqm
other on four faces zigzag shape as per IRC SP 63:2004
8536 25 mm thick Non slippery reflective type designer paving tile ,M 40 grade sqm
8537 25 mm thick Non slippery reflective type designer paving tile ,M 30 grade sqm
8561 Extruded polystyene rigid insulation board 50mm thick sqm

8589 Calcium Silicate tegular edged celling tiles Sqm

8590 Galvanised Steel main Tee ceiling section Size Each
8591 Galvanised Steel perimeter wall Angle Size 24 x Each
8592 Galvanised Steel intermediate cross T section each
8593 Galvanised Steel intermediate cross T section each
8595 Wooden screws with plastic rawl plugs 35mm x8mm each
8596 Galvanised iron 8mm Outer Diameter M-6 dash fastener 50 mm long each
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each
8612 Perimeter wall angle 21x21x0.3mm (3 metre long) each
8613 Intermediate cross T-section 24x25x0.3mm (1.2 mtrs long) each
8614 Intermediate cross T-section 24x25x0.3mm (0.6 mtrs long) each
8615 Hanger rod 0.5 mm thick each
8616 Adjustment clip each
8617 Soffit cleat each
8618 Dash fastener 6 mm dia 50 mm long each
8619 alvanised iron L-Shape level Adjuster each
8620 Vitrified floor tile 50x50 cm sqm
8621 Vitrified floor tile 60x60 cm sqm
8622 Vitrified floor tile 80x80 cm sqm
8623 Vitrified floor tile 100x100 cm sqm
8625 Poly propylene- Random - Co - Polymer (PPR) pipes SDR 7.4 - 16 Outer dia metre

8626 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 20mm Outer dia. metre

8627 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 25mm Outer dia. metre

8628 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 32mm Outer dia. metre

input (Material) [32]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8629 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 40mm Outer dia. metre

8630 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 50mm Outer dia. metre

8631 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 63mm Outer dia. metre

8632 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 75mm Outer dia. metre

8633 Poly propylene - Random - Co - polymer (PPR) pipes SDR 7.4 - 90mm Outer dia. metre

8634 Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11 - 110mm Outer dia. metre

8635 Poly propylene - Random - Co - polymer (PPR) pipes SDR - 11- 160mm Outer dia. metre

8636 Chlorinated Polyvinyl - chloride (CPVC) pipe 15 mm outer dia. metre

8637 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. metre
8638 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. metre
8639 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia. metre
8640 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia. metre
8641 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia. metre
8642 Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5mm inner dia. metre
8643 Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia. metre
8644 Chlorinated Polyvinyl - chloride (CPVC) pipe 100 mm inner dia. metre
8645 Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia. metre
8646 Silicon sealant. cartridge
8647 Stainless steel screws 30mmx4mm cent
8648 Intermediate cross T-section 24x25x0.3mm (0.6 mtrs long) each
8649 Stainless steel (SS 304 grade) adjustable friction window stay. 205 x 19mm each

8650 Stainless steel (SS 304 grade) adjustable friction window stay 255 x 19mm each
8651 Stainless steel (SS 304 grade) adjustable friction window stay. 355 x 19mm each

8652 Stainless steel (SS 304 grade) adjustable friction window stay. 510 x 19mm each

8653 Stainless steel (SS 304 grade) adjustable friction window stay. 710 x 19mm each
8654 Masking tape. metre
8655 Autoclaved aerated cement (AAC) blocks. cum
8656 Gypsum panel 666 X 500 X 100 mm size. sqm
8657 Bonding Plaster for Gypsum Panel kg
8658 Mechanised Autoclaved flyash lime bricks 100 1000 Nos.
8659 Water proof ply 12mm thick. Sqm.
8660 Aluminium casement window fastner (Anodised AC 15 ) each
8661 Aluminium casement window fastner (powder coated ). each
8662 Aluminium casement window fastner (polyester powder coated). each
8663 Aluminium round shape handle (anodised AC 15) each
8664 Aluminium round shape handle (powder coated) each
8665 Aluminium round shape handle (polyester powder coated). each
8666 Stainless steel screws 25mm x4mm cent
8667 UV stabilised 2 mm thick plain FRP sheet . sqm
8668 UV stabilised 3 mm thick plain FRP sheet . sqm
8669 Manglore ridge tiles .........x.......mm 20mm thick. each
8670 Manglore tiles .........x.......mm 20mm thick. each
8671 Precoated galvanised iron profile sheet 0.50 mm TCT sqm
8672 Precoated galvanised steel plain ridges. metre
8673 Precoated galvanised steel flashings/aprons. metre
8674 Precoated galvanised steel gutter metre
8675 Precoated galvanised steel north light curves. metre
8676 Precoated galvanised steel barge board. metre
8677 Precoated galvanised steel crimp curve sqm
8678 1mm thick 35mm wide bright finished stainless steel piano hinges . metre
8683 Red sand stone gang saw cut 30mm thick. sqm
8684 White sand stone gang saw cut 30mm thick. sqm
8685 Delinator each

input (Material) [33]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8686 Precast C.C. Kerb stone M - 25 cum
8687 Thermoplastic paint kg
8688 Glass beads kg
8689 Interlocking C.C. paver block ( 60 mm thick, M-30 ) sqm
8690 High intensity retro - reflective sheet. sqm
8691 Punched tape concertina coil 600 m dia. 10m openable length (Total length 90m) bundle

8692 RBT reinforced barbed wire. metre

8693 Turn buckle and strengthening bolt. each set
8694 Precast pavement slab 450 x 450 x 50mm (M - 30). each
8695 Chain link fabric fancing mesh of size 50x50mm made of G.I. wire of dia. 3.15mm. sqm

8696 Chain link fabric fancing mesh of size 75x75mm made of G.I. wire of dia. 3.15mm. sqm

8697 Chain link fabric fancing mesh of size 100x100mm made of G.I. wire of dia. 3.15mm. sqm

8698 Stainless steel cramps with nuts, bolts and washer for dry stone cladding . each
8699 8 mm thick tapered edge calcium silicate board . sqm
8700 10 mm thick calcium silicate board. sqm
8701 Chain link fabric fancing mesh of size 150x150mm made of G.I. wire of dia. 3.15mm. sqm

8703 Telescopic drawer channels 300mm long . set

8704 Stainless steel roller for sliding arrangment in racks/ cupboards/ cabinets shutter . each

8705 50mmX42mmX2mm thick Factory made door frame of PVC extruded sections in white, metre
grey or wooden finish
8706 25mm thick factory made PVC flash foor shutter i/c carriage. sqm
8707 Factory made glass reinforced plastic door frame 90x45 mm i/c carriage. metre
8708 30 mm thick factory madeglass fiber reinforced plastic panel door shutter i/c carriage. sqm

8710 Factory made solid PVC door frame 60 x 30mm i/c carriage. metre
8711 28mm factory made solid PVC panel door shutteri/c carriage. sqm
8713 Fiber glass reinforced plastic chajja. sqm
8714 Magenatic catcher triple strip verticle type. each
8715 Magenatic catcher double strip horizontal type. each
8716 Mortice lock of approved make Godrej or equivalent with pair of CP handles each

8717 12.5 mm thick Glass fibre reinforced Gypsum board . sqm

8718 Almirah lock of approved make Godrej or equivalent each
8719 2nd class teak wood lipping/ moulded beadibg or Taj beading of size 18X5mm metre

8720 Ceiling sections 0.55 mm thick having a knurled web of 51.55mm and two flanges of metre
26mm each with lips of 10.55mm.
8721 Perimeter channel having one flange of 20mm and another flange of 30mm with thickness metre
of 0.55mm and web of length 27mm.
8722 Nylon sleeves & wooden screws (40mm) each
8723 Counter sunk ribbed head screw 25mm. cent
8724 12mm thick marine plywood conforming to IS:710 sqm
8725 12mm thick fire retardant plywood conforming to IS: 5509. sqm
8726 1.5mm thick decorative laminated sheet sqm
8727 1.0mm thick decorative laminated sheet sqm
8730 30 mm thick factory made glass fiber reinforced plastic flush door shutter sqm
8731 High polymer modified quickset tile adhesive. per kg
8732 synthetic Fiber 6mm / 12mm per pack
of 125 gm
8733 Welded mesh 50x50x2.1 mm sqm
8734 Welded mesh 50x25x2.1 mm sqm
8735 Welded mesh 25x25x2.1 mm sqm
8736 Expended metal size 20 - 25 mm size 18swg sqm
8737 Steel pipe 80x40 16 gauge Qtl
8738 Steel pipe 50x25 18 gauge Qtl
8739 UV stabilised 5 mm thick plain FRP sheet . sqm
8740 Acoustical fine fissured tiles/ Mineral fibre high density tiles Sqm

input (Material) [34]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8741 Glass Fibre Reinforced Gypsum False ceiling tiles Sqm
8742 Earthen pots Each
8743 Disc for floater Each
8744 Trowel blades Each
8745 Filter mats Each
8746 Top mat Each
8747 Concrete Cutter diamond saw Each
8748 Designer polished CC tiles Sqm
8749 8mm thick laminated floor Sqm
8750 89 mm wide having both side laminations Rm
8751 transaction/adaptation profile Rm
8752 Alumium grill (size 7.5mm x 6.0mm and opening of size 102mm x 99mm) Sqm
8753 Y & H section Rm
8754 Anodising 15 microns on aluminium sections for grill Sqm
8755 Powder coating aluminum for grill Sqm
8756 Polyester Powder coating for grill Sqm
8757 SS wire gauge Sqm
8758 Vertical blinds Sqm
8759 Horizontal blinds /Venation blind Sqm
8760 Drapery rod (20 gauge, 25.4 mm diameter) Rm
8761 Sun control film sqm
8762 Polysulphide Kg
8763 Primer Lt
8764 Backup rod Rm
8765 Masking tape, thiner Rm
8766 Door frame RCC Size 75x50 mm Rm
8767 Door frame RCC Size 75 x 75mm Rm
8768 Door frame RCC Size 100 x 75mm Rm
8769 Door frame RCC Size 125 x 75mm Rm
8770 Stone Door frame single paitam Size 75 x 60mm Rm
8771 Stone Door frame single paitam Size 75 x 75mm Rm
8772 Stone Door frame single paitam Size 100 x 60mm Rm
8773 Stone Door frame single paitam Size 100x 75mm Rm
8774 Stone Door frame single paitam Size 125 x 100mm Rm
8775 Stone Door frame Double paitam Size 100x 75mm Rm
8776 Stone Door frame Double paitam Size 125 x 100mm Rm
8777 PVC sheet 1 mm sqm
8778 PVC sheet 1.5 mm sqm
8779 PVC sheet 2 mm sqm
8780 Melamine polish Lt
8781 Melamine polish Lt
8782 PW 6250 (PANEL) Sqm
8783 PW 928 (PERIMETER SECTION) Rm
8784 M.S. PIPE(20x20MM)WITH PRIMER COATING Rm
8785 PW 10150 (PANEL) Sqm
8786 PW 1228 (PERIMETER SECTION) Rm
8800 Imidacloprid 30.5% EC Ltr.
8801 Termitubes Rmt.
8802 Junction Box for antitermite work Each
8803 Autoclave aerated blocks of Conforming to Grade-I cum
8804 polymer modified adhesive mortar Kg.
8805 Hand Grinder for groove cutting metre
8806 Heavy Duty Vitrified Polished Digital tiles 60x60 cm sqm
8807 Heavy Duty Vitrified Polished Digital tiles 60x120 cm sqm
8808 Heavy Duty Vitrified glazed MAT tiles 60x60 cm sqm
8809 Heavy Duty Vitrified glazed MAT tiles 60x120 cm sqm
8810 Heavy Duty Vitrified Double Charged tiles 60x60 cm sqm
8811 Heavy Duty Vitrified Double Charged tiles 80x80 cm sqm
8812 Heavy Duty Vitrified Double Charged tiles 100x100 cm sqm
8813 19mm thick BWP block board sqm
8814 Front side finishing with 4mm thick teak veneer sqm
8815 Outer Bidding 35mm x 12mm Rmt.
8816 Brass Lock each

input (Material) [35]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8817 4.0mm thick veneer sqm
8818 6.00mm thick veneer sqm
8819 S.S. Rod pipe 30mm Rmt.
8820 S.S. Rod pipe 30mm (Bracket) Each
8821 Stainless steel (Grade-304)hollow section round/square tubes Kg.
8821(a) Stainless steel (Grade-204)hollow section round/square tubes Kg
8822 Stainless steel bolts/square bar and plates Kg.
8823 GI metal Tile Lay-in Plain Tegular edge global white color tiles of size 595x595mm and Sqm
0.5mm thick
8824 Main T Ceiling sections 24x38x0.3mm (3 metre long) Each
8825 Perimeter wall angle 24x24x0.3mm(3 metre long) Each
8826 Intermediate cross T-ection 24x25x0.3mm (1.2 m long) Each
on grid for cut outs
8827 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) Each
on grid for cut outs
8828 Hanger rod 4mm thick Each
8829 Adjustment clip 85x30x0.8mm Each
8830 Soffit cleat (Size 27x37x25x1.60mm) Each
8831 Dash Hold fastener 12.5 mm dia 50 mm long Each
8832 GI metal Tile Lay-in Perforated Tegular edge global white color tiles of size 595x595mm sqm
and 0.5mm thick
8833 Mineral Fibre Anti Bacterial Suspended beveled tegular edge ceiling tiles Sqm
8834 G.I. Main Runner 15mm x 32mm 3000 mm Length 0.33 mm thick Each
8835 G.I. Cross Tee 15mm x 32mm 1200 mm Length 0.33 mm thick Each
8836 G.I. Cross Tee 15mm x 32mm 600 mm Length 0.33 mm thick Each
8837 Mineral Fibre Acoustical Suspended beveled tegular edge ceiling tiles Sqm
8838 Primer (10 Sqm. P.Ltr in to Coats) Ltr.
8839 for putty Choke Mitty kg
8840 Linseed oil Ltr.
8841 Varnish Ltr.
8842 Enamel Paint Kg
8843 Valvet touch paint (5 Sqm. P.Ltr. For three coat) Ltr.
8844 Primer (20 Sqm. In 1 Ltr. for one coat) Ltr.
8845 Primer Ltr.
8846 Duco Putty kg
8847 Thinner Ltr.
8848 Duco Paint Ltr.
8849 Hire Charges of Spray Machine Day
8850 Core cutting machine day
8851 Nano Technology 5mm Crack Filling High Strength Chemical Liters
8852 Nano Technology Highly Hydrophobic Deep Penetrating Primer Liters
8853 Fiber Mess Net Pasting on Roof sqm.
8854 Nano Technology Oiliphobic Water Proof, Water Based, Breathable Coat Liters
8855 Aerogel Green Based Thermal Insulation 1000 Micron Coating With Sri Value 102 or Liters
More
8856 Nano Technology Anti Static + Anti Stain+ Anti Skid+High Gloss Top Coat Liters

8858 Nano Technology Degreasing Stone Cleaner, Non Acidec, Non Alcaline, Non Harmful Liters
For Cleaning of Stones, Without Damaging Stones
8859 Nano Technology Deep Penetrating Primer Deep Penetrating 2-3 MM Inside. Liters

8860 Silicon Dioxide formulated with nano technology sol gel process, water based, UV Liters
Protection & Breathable Product- Giving Effects of water proof stone, Breathable, with no
change in Stoe color, Absolutely Natural & Food Safe, No Coating visible on stone, only
impregnation Material, Upto 5 mm Penetrating power

8861 Anti Stain Treatment with nano technology with Transparent matt or high shine Liters
protective coat formulated with pure silica, Flexible in Nature for Sealing stone Joints and
Making Stones anti stain, Anti Slippery with Absolutely Natural Appearance, Avoides
Stone Loosing and Giving Firm Grip to Stone Facades

8862 Dow coarning 789 Weather proofing silicon cartage

8863 Silicon Structural adhesive Mtr.

input (Material) [36]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

8864 Toughened Glass 6mm thick Sqm
8865 sundries Backup Rod, Masking tape, spacer tape etc. L.S.
8866 Polycrete wall 125x125 (main member pillar) Mtr.
8867 Polycrete wall 20x305 (Horizontal panel) Mtr.
8868 Alumium grill section of size 7.5mm x 6.0mm and opening of size 75mmx72mm Sqm

8869 Alumium grill section of size 7.5mm x 6.0mm and opening of size 50mmx48mm Sqm

8870 Solution Required for Dry Cleaning of sofa sets Ltr.

8871 Vacume Cleaner Shampoing/Drycleaning Machine Hr.
8872 Tapestry cloth of Sofa set Mtr.
8873 100mm thick Joint less P.U. foam sqm
8874 50mm thick Joint less P.U. foam sqm
8875 25mm thick Joint less P.U. foam sqm
8876 Cost of jata / Dori L.S
8877 Cost of Sofa Wooden Leg Each
8878 Synthetic Carpet Carpet including 5% Wastage P.Sqm.
8879 Chiken wire mesh P.Sqm.
8880 Premium Quality white glazed vitreous china W.C. orissa pan (IS:2556 Mark) Size Each
580x440 mm.
8881 Premium Quality white glazed vitreous china Universal (anglo-Indian type) WC Pan Each

8882 Premium Quality WVC Wall Hunged WC Pan Each

8883 Double Syphonic European W.C. with mounted W.V.C. flushing cisternand seat cover Each
(complete set)
8884 premium qulaity WVC Urinal Flat Back (small) size 440x265x315 mm. Each
8885 premium qulaity WVC Urinal Flat Back (large) or half stall size 590x375x390 mm. Each

8886 premium qulaity W.V.C. Urinal Partition plate of size 630x315 mm Each
8887 premium qulaity WVC Wash basin Size 550 mm x 400 mm Each
8888 premium qulaity WVC Wash basin with C.I. brackets Each
8889 premium qulaity WVC Wash basin Size 550 mm x 400 mm dia for counter top. Each

8890 Premium quality water closet Seat Cover Solid PVC (ISI marked) grade-I White for Each
EWC.
8891 Premium quality Low level Flushing Cistern of 10 litres capacity PVC with PVC bend as Each
per IS : 7231
8892 Ornamental frame size 50x12 with 6mm Ply Board on Back Side (3'+2')x2
8893 looking Mirror 5mm thick (3'x2')
8894 Water Proof Ply (3'x2')
8895 Hydraulic Seat Cover for Europeon WC each
8896 chair for wall hung W.C. each
8897 Fixing Concealed cistern with Floor mounting frame and flush plate each
8898 New spindle for Bib cock/pillar cock each
8899 Toilet corner Glass Shelf size 225x225mm with C.P. brass brackets each
8900 premium quality waste coupling 32mm half thread Each
8901 Premium quality Bottle trap internal portion 32mm, size 250mm long Each
8902 Premium Towel rack 600mm long 260mm wide with lower hangers Each
8903 Premium quality Angular stop cock with wall flange Each
8904 Premium quality Two way Bib cock with wall flange Each
8905 PVC Tank Cover 300 Lt. capacity Each
8906 PVC Tank Cover 500 Lt. capacity Each
8907 PVC Tank Cover Above 500 Lt. capacity Each
8908 C.I. Saddle pieces 100mm dia Each
8909 Sluice valve 100mm dia Each
8910 DI Pipe (Ductile iron pipe) of 100 mm dia Meter
9000 Mechanised Autoclaved flyash lime bricks 75 1,000 Nos
9001 uPVC Casement Window Frame 60x60mm with EPDM & 1.2mm thk G.I Reinforcement Meter
(BR60DA)
9004 uPVC Casement Window Fix Mullion 76x60mm with EPDM & 1.2mm thk G.I Meter
Reinforcement (SE76NDA)
9005 uPVC Single Glazing Bead 34x20 with EPDM (GB34DA) Meter

input (Material) [37]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

9022 Multipoint Transmission Gear (ESPAG) with white finish powder coated handle Per. Pc.

9023 5mm Thick Float Glass (ISI make) Sq. Mtr.

9050 Labour & Manufacturing Charges (Cutting, Drilling, Welding, Trimming, Cleaning, Glass Sq. Mtr.
& Hardware Fixing & Packing)
9051 uPVC Window & Door Site Installation Labour (Unloading, assembling & fixing, silicon Sq. Mtr.
applicaton & cleaning)
9052 Bectokill chemical Ltr
9053 UV tube Each
9054 6 mm thick tapered edge calcium silicate board/tile sqm
9055 6 mm thick calcium silicate perforated tile/board sqm
9056 8 mm thick calcium silicate perforated tile/board sqm
9100 C.P. Brass flush Valve Economy model 25 mm. each
9101 C.P. Brass flush Valve Economy model 32 mm. each
9102 C.P. Pillar Cock 15 mm nominal size each
9103 Vitreous china flat back wash basin Size 510 mm x 440 mm each

9104 Vitreous china flat back wash basin Size 580 mm x 430 mm each
9105 Vitreous china flat back wash basin Size 610 mm x 510 mm each
9106 Vitreous china flat back wash basin Size 400 mm x 400 mm corner each
9107 Vitreous china counter top wash basin Size 410 dia each
9108 Vitreous china counter top wash basin Size 550 mm x 400 mm dia each
9109 Vitreous china counter top wash basin Size 630 mm x 500 mm dia each
9110 terrazzo (Mosaic) wash hand basin size 450 mm x 280 mm. each
9111 terrazzo (Mosaic) wash hand basin size 550 mm x 400 mm. each
9112 Bottle Trap C.P. Brass 32 mm each
9113 Bottle Trap C.P. Brass 40 mm each
9114 Bottle Trap Synthetic Material (PTMT) 32 mm. each
9115 Bottle Trap Synthetic Material (PTMT) 40 mm. each
9116 Bottle Trap PVC each
9117 Grating Stainless Steel Sheet size 125mm dia. each
9118 Grating Stainless Steel Sheet size 125mm dia. Heavy Quality each
9119 Grating Synthetic Material(PTMT) of approved quality/make size 125mm dia each

9120 Grating Synthetic Material(PTMT) of approved quality/make size 150mm dia each

9121 Grating Square 150 x 150 x 8mm. (Anti Cockroach) each

9122 Grating C.P. brass with frame (Heavy) & superior quality size 125mm dia. each
9123 Grating C.P. brass with frame Light & superior quality size 125mm dia each
9124 Grating Cast Iron. each
9125 Liquid Soap Container C.P. brass each
9126 Liquid Soap Container Synthetic Material each
9127 Tooth Paste & Brush Holder C.P. brass each
9128 Tooth Paste & Brush Holder C.P. brass (Heavy and Superior quality.) each
9129 Tooth Paste & Brush Holder Stainless Steel each
9130 Toilet Paper Holder with rod C.P. brass each
9131 Toilet Paper Holder with rod C.P. brass heavy & Superior quality. each
9132 Toilet Paper Holder with rod WVC (1stquality, ISI Marked) recessed size 150x150mm. each

9133 Toilet Paper Holder with rod WVC (1stquality, ISI Marked) size 150x150mm .Exposed each

9134 Soap Dish or Tray C.P. brass each

9135 Soap Dish or Tray C.P. brass heavy and superior quality. each
9136 Soap Dish or Tray WVC (1st Quality, ISI Marked) recessed size 150 x 150 mm. each

9137 Soap Dish or Tray WVC (1st Quality, ISI Marked) recessed size 200 x100mm. each

9138 Soap Tray WVC (1st Quality, ISI Marked) size 200 x100mm. each
9139 Soap Dish WVC (1st Quality, ISI Marked) size 380mm. each
9140 Twin- peg C.P. brass each
9141 Twin- peg C.P. brass (heavy)Superior quality each
9142 Twin- peg Acrylic each

input (Material) [38]

 (Integrated Building BSR 2022 Rajasthan)

CODE NAME OF MATERIALS UNIT

9151 Shower arm 15mm dia C.P.brass heavy & superior quality 150mm each
Projection.
9152 Shower arm 15mm dia C.P.brass heavy & superior quality 220mm each
Projection.
9153 Shower arm 15mm dia C.P.brass heavy & superior quality 300mm each
Projection.
9154 Shower arm 15mm dia C.P.brass heavy & superior quality 370mm each
Projection.
9155 Bath Shower C.P. brass fixed. each
9156 Bath Shower C.P. brass of Heavy & superior quality 150mm. each
9157 Bath Shower C.P. brass of Heavy & superior quality, revolving with adjustable key each
150mm.
9158 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality 50x15mm each

9159 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality 100x15mm each

9160 Extension Pipe for bib cock C.P. brass of Heavy & Superior quality 150x15mm each

9161 Acrylic Toilet accessories set consisting of Towel rail, shelf, towel ring, soap dish, paste each
& brush holder & twin peg
9162 Jet spray for water closet with C.P. Copper Tube flange each
9163 C.P.flange for 15mm dia taps. each
9164 C.P. Health Faucet with 1Mtr. Long Tube & Hook each
9165 C.P. brass Urinal Spreader for Large Urinal of heavy duty each
9166 P.V.C. Cistern fittings (Syphon, Ball cock & Handle Set) Set
9996 Carriage & sundries L.S.
9997 Water charge
9998 Contractor profit & overhead
9999 Sundries L.S.

input (Material) [39]

 (Integrated Building BSR 2022 Rajasthan)

INPUTS
SIC RATES OF MATERIALS
RATE
60.00
260.00
320.00
270.00
290.00
300.00
230.00
150.00
300.00
385.00
330.00
150.00
405.00
250.00
280.00
350.00
485.00
530.00
950.00
870.00
930.00
990.00
990.00
1100.00
1100.00
1000.00
950.00
70.00
1800.00
500.00
350.00
60500.00
53000.00
60500.00
60500.00
35.00
82.00
570.00
130.00
130.00
76.00
41.00
18.00
405.00
300.00
470.00
580.00
815.00
1120.00
350.00
350.00

250.00
580.00
270.00
340.00
405.00
550.00
70.00

input (Material) [40]

 (Integrated Building BSR 2022 Rajasthan)

RATE
600.00
50.00
30.00
7000.00
18000.00
500.00
3465.00
75.00
650.00
500.00
400.00
350.00
3000.00
2700.00
2500.00
2500.00
2400.00
2300.00
2250.00
300.00
250.00
200.00
980.00
750.00
650.00
250.00
220.00
200.00
170.00
140.00
115.00
76.00
240.00
220.00
200.00
400.00
350.00
2500.00

3500.00
190.00
900.00
800.00
750.00
700.00
500.00
55.00
110.00

90.00

80.00

130.00
190.00
260.00
25.00
760.00
630.00
510.00
560.00
305.00
150.00

input (Material) [41]

 (Integrated Building BSR 2022 Rajasthan)

RATE
180.00
80.00
50.00
600.00
550.00
500.00
450.00
400.00
950.00
1150.00
1050.00
900.00
700.00
180.00
160.00
140.00
800.00

90.00
130.00

115.00

95.00

720.00
630.00
470.00
360.00
280.00
230.00
140.00
230.00
320.00
510.00
160.00
130.00
90.00
70.00
40.00
90.00
45.00
50.00
40.00
20.00
7.00
250.00
180.00
100.00
56.00
450.00
360.00
280.00
215.00
115.00
105.00
90.00
120.00
110.00
90.00
40.00
82.00
65.00

input (Material) [42]

 (Integrated Building BSR 2022 Rajasthan)

RATE
45.00
40.00
40.00
31.00
28.00
23.00
13.00
10.00
7.00
130.00
101.00
76.00
60.00
48.00
36.00
23.00
20.00
1050.00
1000.00
900.00
850.00
850.00
800.00
380.00
205.00
210.00
190.00
980.00
860.00
710.00
550.00
410.00
750.00
650.00
550.00
140.00
2150.00

2050.00

1980.00

1550.00

1480.00

1400.00

1850.00

1650.00

1550.00

200.00
350.00
200.00
400.00
120.00
800.00
500.00
550.00
25.00

input (Material) [43]

 (Integrated Building BSR 2022 Rajasthan)

RATE
750.00
600.00
500.00
50.00
165.00
560.00
150.00
1600.00
1300.00
1300.00
1000.00
500.00
500.00
60.00
30.00
525.00
105.00
55.00
60.00
200.00
130.00
130.00
170.00
300.00
150.00
150.00
160.00
270.00
270.00
250.00
265.00
285.00
165.00
90.00
60.00
350.00
90.00
150.00
275.00
90.00
75.00
125.00
15.00
8.00
6.00
25.00
15.00
75.00
70.00

70.00
40.00
40.00
50.00
30.00
50.00
800.00
400.00
25.00
1500.00
700.00
300.00
450.00

input (Material) [44]

 (Integrated Building BSR 2022 Rajasthan)

RATE
900.00

950.00

30.00
100.00
1800.00
1800.00
300.00
7000.00
290.00
350.00
1150.00
100.00
100.00
7400.00
7400.00
7400.00
8000.00
7400.00
7400.00
7400.00
7400.00
9600.00
9600.00
325.00
8000.00
35.00
8000.00
550.00
25.00

150.00
15.00

30.00
9000.00
70.00
7500.00
15.00
20.00

15.00
6350.00
6930.00
45.00
90.00
350.00
25.00
120.00
10.00
17.00
81.00
1275.00
1000.00
650.00
750.00
70.00
80.00
700.00
375.00
650.00

input (Material) [45]

 (Integrated Building BSR 2022 Rajasthan)

RATE
750.00
350.00
650.00
400.00
250.00
1600.00
1500.00
600.00
450.00
800.00
800.00
900.00
900.00
500.00
1100.00
1350.00
1450.00
1400.00
1100.00
1155.00
700.00
750.00
1100.00
375.00
750.00
400.00
290.00
310.00
500.00
225.00
200.00
190.00
175.00
30.00
25.00
40.00
30.00
30.00
40.00
5.00
5.00
735.00
60.00
60.00
225.00
5500.00
125.00
5500.00
5200.00
200.00
190.00
180.00
125.00
175.00
100.00
20.00
175.00
130.00
1900.00
100.00
200.00
325.00
105.00

input (Material) [46]

 (Integrated Building BSR 2022 Rajasthan)

RATE
75.00
130.00
100.00
50.00
41.00
35.00
41.00
52.00
58.00
400.00
450.00
410.00
525.00
35.00
500.00
400.00
2200.00
1300.00
6500.00
3200.00
250.00
140.00
185.00
230.00
175.00
70.00
100.00
120.00
300.00
70.00
13.00
17.00
18.00
21.00
28.00
42.00
53.00
63.00
92.00
116.00
150.00
165.00
450.00
380.00
1100.00
2400.00
200.00
500.00

550.00

600.00

400.00
1700.00

2300.00

10.00
2000.00
5600.00

3100.00

input (Material) [47]

 (Integrated Building BSR 2022 Rajasthan)

RATE
3470.00

4085.00

400.00
11000.00

1600.00
5400.00
1800.00
250.00
100.00
900.00
750.00

700.00

650.00

460.00
620.00
1030.00
240.00
160.00
72.00
2000.00

1300.00

1700.00

2000.00

1600.00

1120.00
150.00
305.00
375.00
48.00
85.00
121.00
760.00
270.00
170.00
400.00
120.00
1060.00
800.00
600.00
370.00
315.00
255.00
195.00
210.00
435.00
2645.00
2780.00
485.00
3250.00
3360.00
3510.00
3800.00

input (Material) [48]

 (Integrated Building BSR 2022 Rajasthan)

RATE
6300.00
6700.00
430.00
300.00
490.00
610.00

680.00

200.00
300.00
370.00
470.00
160.00
205.00
290.00
360.00
420.00
600.00
695.00
890.00
8.00
27.00
65.00
370.00
86.00
1180.00
1590.00
2020.00

3675.00

391.00
575.00
1210.00
475.00
650.00
325.00
420.00
360.00
470.00
470.00
625.00
530.00
660.00

175.00
241.00
62.00
107.00
135.00
227.00
275.00
430.00
890.00
995.00
7.00
460.00
510.00

675.00

input (Material) [49]

 (Integrated Building BSR 2022 Rajasthan)

RATE
720.00

261.00
315.00
380.00
510.00
500.00
670.00

610.00
730.00

335.00
465.00
130.00
175.00
28.00

38.00

38.00

53.00

630.00
475.00
520.00
700.00
950.00
1430.00
1600.00
2150.00
2650.00
3465.00
4350.00
5000.00
5900.00
615.00
28.00
35.00
56.00
70.00
106.00
122.00
155.00
171.00
245.00
300.00
350.00
405.00
470.00
50.00
100.00
150.00
220.00
255.00
300.00
450.00
700.00
3700.00
3500.00
1600.00

input (Material) [50]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1900.00
550.00
390.00
770.00

1600.00
2400.00
1075.00
210.00
650.00
600.00
43.00
60.00
200.00
65.00
190.00
300.00
191.00

241.00

890.00
150.00
400.00
350.00
250.00
83.00
190.00
400.00
425.00
800.00
800.00
250.00
370.00
420.00
410.00
520.00
580.00
850.00
1200.00
2030.00
420.00
550.00
720.00
1080.00
1900.00
2700.00
3000.00
3755.00
4510.00
8585.00
12785.00
15750.00
930.00
860.00
550.00
115.00
185.00
530.00
1280.00
1015.00
14.00
14.00

input (Material) [51]

 (Integrated Building BSR 2022 Rajasthan)

RATE
19.00
19.00
20.00
24.00
34.00
43.00
48.00
5500.00

240.00
280.00
150.00
170.00
70.00
170.00
170.00
230.00
380.00
140.00
12.00
4500.00
6000.00
0.00
0.00
0.00
0.00
0.00
150.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00

input (Material) [52]

 (Integrated Building BSR 2022 Rajasthan)

RATE
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
350.00
450.00
60.00
450.00

550.00

950.00
700.00
1200.00
1500.00
515.00
650.00
800.00
60.00
45.00

250.00
300.00
340.00
400.00
75.00
1050.00

25.00

input (Material) [53]

 (Integrated Building BSR 2022 Rajasthan)

RATE
50.00

60.00
470.00
185.00

150.00
200.00
250.00
300.00
1050.00
850.00

350.00
600.00
1050.00
1350.00
650.00
1250.00
1470.00
300.00
450.00
700.00
350.00
600.00
800.00
800.00
950.00
550.00
250.00
120.00
1050.00
500.00
4500.00
4200.00
325.00
170.00

770.00
400.00
750.00
810.00
1100.00
1100.00
405.00
470.00
810.00
810.00
35.00
52000.00
37.00
41.00
7000.00
1300.00
175.00

1400.00
2750.00
2500.00
4200.00
8100.00
11500.00
14400.00

input (Material) [54]

 (Integrated Building BSR 2022 Rajasthan)

RATE
165.00
1400.00

1150.00
250.00
250.00
270.00
200.00
330.00
290.00
520.00
390.00
560.00
410.00
650.00
520.00
700.00

560.00
650.00
730.00
900.00
980.00

455.00

345.00
580.00

470.00

590.00

800.00

250.00
315.00
430.00
310.00
405.00
390.00
505.00
325.00
250.00
220.00
200.00
230.00
160.00
180.00
310.00
150.00
3000.00
2600.00
350.00
375.00
400.00
87.00
110.00
80.00
60.00
40.00
2200.00

input (Material) [55]

 (Integrated Building BSR 2022 Rajasthan)

RATE
225.00
240.00
350.00
35.00
350.00
250.00
20.00
150.00
4000.00
950.00
800.00
650.00
300.00
1000.00
400.00
260.00
600.00
1500.00
2000.00
4400.00
300.00
58.00
35.00
61.00
23.00
7.00
4.00
29.00
32.00
162.00
14.00
58.00
130.00
220.00
7.00
9820.00
120.00
200.00

725.00

73.00
4.00
6.00
41.00
61.00
69.00
890.00
1020.00
460.00
520.00
9.00
23.00
420.00

48.00
61.00
1600.00
21.00

18.00

input (Material) [56]

 (Integrated Building BSR 2022 Rajasthan)

RATE
17.00

295.00
170.00

650.00

650.00
800.00
165.00
200.00
3200.00
3800.00
6500.00
6900.00
6430.00

5730.00

3630.00

7700.00
10825.00
3780.00

3500.00

2250.00

3220.00
2600.00
2100.00
400.00
250.00

300.00

350.00

95.00
460.00
450.00
500.00

900.00
210.00
80.00

90.00

60.00

70.00

1050.00

1420.00

2110.00

275.00
350.00

input (Material) [57]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1270.00

870.00

1040.00

2310.00

2310.00

2900.00

3300.00

2250.00

2430.00

2350.00

1950.00

2000.00

1850.00

850.00

53.00
46.00
3700.00
69.00
52.00
150.00

275.00

25.00

30.00

57.00
75.00
90.00
137.00
158.00
220.00
190.00
305.00
96.00
160.00
200.00

input (Material) [58]

 (Integrated Building BSR 2022 Rajasthan)

RATE
375.00
29.00
57.00
221.00
332.00
126.00
200.00

250.00

400.00
450.00
350.00
2050.00
1150.00
2000.00

2250.00

27200.00

38100.00

52000.00

16200.00

25200.00

29300.00

16200.00

26000.00

48.00
150.00
230.00
520.00
920.00
705.00
1000.00
470.00
12500.00
140.00

125.00
550.00
990.00
47.00
940.00
1000.00

1200.00

input (Material) [59]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1400.00

1500.00
2000.00
3000.00
1200.00
2200.00
3000.00
900.00
1800.00
250.00
600.00

1950.00
56600.00
12.00
13.00
14.00
15.00
46.00
830.00
46.00
58.00
81.00
98.00
15.00
18.00
250.00
870.00
87.00
75.00
220.00
750.00
350.00
1200.00
870.00
90.00
405.00
420.00
180.00
1970.00
1155.00
470.00
1270.00
58.00
35.00
12.00
14.00
133.00
1100.00

600.00
650.00
870.00
550.00
290.00
85.00

85.00
500.00

1230.00

input (Material) [60]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1500.00

2140.00

1720.00

820.00
385.00
44000.00
705.00
400.00
45.00
45.00
60.00
55.00
65.00
75.00
1550.00
35.00
2500.00
255.00
990.00
105.00
225.00
310.00
370.00
235.00
265.00
380.00
185.00
185.00
82.00
400.00
80.00
130.00

4270.00
6300.00
8100.00
2500.00
3900.00
5600.00
6300.00
3500.00
5250.00
6800.00
9500.00
650.00
460.00
439.00
440.00
15.00
18.00
35.00
610.00
72.00
15.00
12.00
870.00
270.00
225.00
550.00

input (Material) [61]

 (Integrated Building BSR 2022 Rajasthan)

RATE
700.00

800.00

800.00
900.00
1100.00
650.00
750.00

950.00

550.00

650.00

800.00

40.00
700.00

950.00

1100.00

1350.00

950.00

41.00
46.00
120.00
165.00
670.00
700.00
350.00

520.00

970.00

1620.00

2400.00

290.00
250.00
350.00
240.00
450.00
540.00
610.00
270.00
240.00
47.00
51.00
62.00
82.00
105.00

input (Material) [62]

 (Integrated Building BSR 2022 Rajasthan)

RATE
125.00
41.00
230.00
260.00
230.00
360.00
470.00
835.00
1250.00
200.00
400.00
600.00
400.00
600.00
900.00
920.00
1370.00
1890.00
2435.00
3130.00
3670.00
5260.00
5850.00
7830.00
8770.00
12000.00
13600.00
14000.00
16300.00
18350.00
38.00
53.00
95.00
105.00
150.00
190.00
380.00
420.00
435.00
530.00
840.00
990.00
1100.00
1480.00
1815.00
12500.00
18800.00
13150.00

19900.00

2650.00
3650.00
4750.00
6300.00
8100.00
10080.00
12050.00
14550.00
17650.00
24000.00
29500.00

input (Material) [63]

 (Integrated Building BSR 2022 Rajasthan)

RATE
2770.00
3400.00
6215.00
1930.00
2735.00
3640.00
4500.00
5500.00
6580.00
8010.00
10600.00
4950.00

5580.00

7500.00

7800.00

1370.00

2120.00

2950.00

3920.00

5000.00

6400.00

8100.00

10700.00

14000.00

18200.00

850.00
1220.00
1730.00
2350.00
3310.00
3820.00
4550.00
5400.00
6400.00
8400.00
10450.00
14550.00
17900.00
21700.00
5500.00
2800.00
4850.00
56600.00
56600.00
46200.00
375.00
450.00
380.00

input (Material) [64]

 (Integrated Building BSR 2022 Rajasthan)

RATE
450.00
785.00

290.00

405.00

465.00

230.00
240.00
69.00

175.00
600.00
3250.00

8.00
350.00

380.00

350.00

550.00

675.00

4700.00

2100.00
1900.00
435.00
470.00
125.00
125.00
150.00
190.00
210.00
250.00
1025.00
1360.00
1355.00
320.00
425.00
525.00
900.00
460.00
475.00
700.00
750.00
1325.00
150.00
155.00
200.00
275.00
67.00

84.00

42.00
51.00
75.00

input (Material) [65]

 (Integrated Building BSR 2022 Rajasthan)

RATE
350.00
5200.00
5200.00
5200.00
5200.00
5000.00
1500.00

1560.00

1865.00
2000.00

185.00
770.00
925.00
190.00

230.00
130.00
95.00
110.00
150.00
250.00
175.00
225.00
110.00
40.00
305.00
250.00
150.00
100.00
315.00
210.00
175.00
150.00
485.00

430.00

370.00

330.00
170.00
98.00
81.00
90.00
100.00
130.00
190.00
240.00
350.00
290.00
50.00
460.00
450.00
250.00
350.00
158.00
190.00
130.00
110.00

input (Material) [66]

 (Integrated Building BSR 2022 Rajasthan)

RATE
578.00

551.00

525.00

709.00

683.00

609.00

824.00

798.00

746.00

1024.00

998.00

945.00

1213.00

1187.00

1134.00

788.00
683.00
570.00

901.00
140.00
140.00
140.00
140.00
140.00
44.00
230.00
145.00
87.00
41.00
12.00
6.00
3.00
12.00
17.00
463.00
566.00
766.00
809.00
52.00

69.00

116.00

185.00

input (Material) [67]

 (Integrated Building BSR 2022 Rajasthan)

RATE
280.00

430.00

650.00

805.00

1285.00

1345.00

2835.00

73.00
91.00
130.00
181.00
285.00
410.00
1140.00
1500.00
2080.00
3625.00
360.00
550.00
3780.00
185.00

205.00
265.00

495.00

910.00
9.00
2550.00
810.00
92.00
5200.00
1650.00
90.00
105.00
115.00
140.00
165.00
195.00
145.00
745.00
1120.00
41.00
23.00
440.00
440.00
440.00
480.00
480.00
440.00
560.00
110.00
460.00
750.00
800.00

input (Material) [68]

 (Integrated Building BSR 2022 Rajasthan)

RATE
4800.00
100.00
120.00
578.00
1950.00
1050.00

20.00
50.00
60.00
210.00

160.00

120.00

280.00
350.00
430.00
110.00

450.00
29.00

210.00

2800.00
450.00
3200.00

600.00
3200.00
4900.00
105.00
90.00
2850.00

450.00
400.00
50.00

85.00

90.00

3.00
105.00
1500.00
1280.00
800.00
650.00
2700.00
50.00
45.00

205.00
230.00
260.00
235.00
8750.00
8850.00
1350.00
850.00

input (Material) [69]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1150.00
12.00
6930.00
6930.00
14000.00
41600.00
5300.00
650.00
1850.00
700.00
550.00
1100.00
90.00
700.00
850.00
950.00
550.00
1400.00
1500.00
250.00
650.00
650.00
1300.00
60.00
60.00
70.00
85.00
90.00
98.00
87.00
98.00
125.00
160.00
175.00
150.00
200.00
420.00
500.00
560.00
450.00
350.00
555.00
46.00
48.00
785.00
68.00
3850.00
11.00
660.00
3080.00
15.00
330.00
745.00
1220.00
1016.00
1422.00
813.00
1016.00
1151.00
968.00
860.00
70.00
200.00

input (Material) [70]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1100.00
1350.00
300.00
100.00
275.00
200.00
130.00
825.00

205.00
130.00
80.00

37.00

8.00
7.00
3.00
42.00
935.00

945.00
195.00
81.00
41.00
865.00
140.00
15.00
250.00
255.00
270.00
500.00
150.00
270.00
190.00
160.00
500.00
500.00
15000.00
400.00
480.00
32.00
600.00
700.00

300.00

350.00

350.00

1200.00

700.00

270.00
450.00

input (Material) [71]

 (Integrated Building BSR 2022 Rajasthan)

RATE
1800.00
1.25
710.00
380.00
715.00

1050.00

900.00
20.00
350.00
1400.00
700.00
350.00
1.25
83.00
350.00
40.00
2050.00

4990.00

11850.00
16500.00

2100.00
7800.00

2350.00
1750.00
100.00
3040.00

830.00

1890.00

78.00
120.00
40.00
3850.00
1400.00
6500.00
80.00
1350.00
1275.00
1775.00
4000.00
1210.00
2100.00
170.00
180.00
225.00
195.00
4950.00
850.00
4500.00
420.00

499.00

63.00

input (Material) [72]

 (Integrated Building BSR 2022 Rajasthan)

RATE
635.00

509.00
572.00

347.00

1549.00
7980.00
300.00
450.00
575.00
1750.00
3600.00
870.00
997.00

1200.00
1926.00
901.00
1588.00
1588.00
1690.00
370.00
420.00
750.00
860.00
500.00
600.00
260.00
70.00
90.00
110.00

120.00

400.00
300.00
90.00
200.00
550.00
350.00
350.00
500.00
400.00
400.00
850.00
250.00

220.00

315.00
205.00
230.00

450.00

390.00
450.00
89.00
190.00
90.00

input (Material) [73]

 (Integrated Building BSR 2022 Rajasthan)

RATE
230.00

430.00

375.00

470.00

163.00
450.00
520.00

125.00

140.00

230.00

2200.00

670.00
30.00
900.00
930.00
450.00
1.25
1.00%
10.00%
1.25

input (Material) [74]

 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : G-4.1 : CARRIAGE OF MATERIALS

NOTE
1 Rates are for net quantities after deduction of voids
2 Part of Km beyond 1 Km. will be treated as under :
1.499 = 1.00 Km. ; 1.500 Km. = 2.00 Km
3 The rates are inclusive of loading and unloading
4 The rates are inclusive of stacking. If stacking is not required, no deduction is to be done.

Rates

Ch Code Add for Add for each Add for each Add for each
Description Unit Up to each 50 M For 500 M For 1 1 Km beyond For 5 1 Km beyond For 10 1 Km beyond For 20
No.
50 M (upto 500 (0.5 Km.) Km. Ist Km (upto Km. 5 Km (upto Km. 10 Km (upto Km.
M) 5 Km.) 10 Km.) 20 Km.)

1 2 3 4 5 6 7 8 9 10 11 12 13
Earth, Sand, Lime, Morrum manure or
4.1 Cum 23.00 4.00 59.00 80.00 9.00 125.00 8.00 165.00 8.00 240.00
sludge
Building Rubbish Stone metal (Grit and
4.2 Cum 30.00 5.00 72.00 80.00 9.00 125.00 8.00 165.00 8.00 240.00
ballast etc.)
4.3 Stone for Masonry work & soling Cum 44.00 5.00 90.00 105.00 7.00 132.00 7.00 164.00 6.00 221.00
4.4 Excavated rock Cum 44.00 5.00 90.00 105.00 7.00 132.00 7.00 164.00 6.00 221.00
4.5 Bricks 1000 Nos 89.00 12.00 193.00 227.00 14.00 282.00 13.00 345.00 12.00 460.00
4.6 Brick Tiles 1000 Nos 36.00 7.00 98.00 115.00 13.00 167.00 13.00 230.00 12.00 345.00
Cement, Stone blocks pipes and other
4.7 MT 25.00 4.00 56.00 66.00 8.00 98.00 8.00 138.00 7.00 207.00
heavy materials
Steel, Tar bitumen , Timber and steam
4.8 MT 23.00 3.00 50.00 59.00 13.00 110.00 13.00 173.00 12.00 288.00
coal
4.9 Empty bitumen drums 10 Nos 38.00 3.00 65.00 77.00 5.00 95.00 4.00 115.00 4.00 150.00
4.10 Carriage with care Precast cement concrete blocks like Dand & kerbs etc weighing
4.10.1 Upto 50 Kg. Each -- -- 3.95 4.60 0.40 6.00 0.40 8.00 0.35 11.00
4.10.2 51 to 70 Kg. Each -- -- 6.60 7.60 0.40 9.00 0.45 11.00 0.35 15.00
4.10.3 71 to 100 Kg. Each -- -- 8.00 9.00 0.50 11.00 0.50 14.00 0.35 17.00
4.11 R.C.C. Hume Pipe with collar
4.11.1 Dia 300 mm Mtr. -- -- 24.00 28.00 0.70 31.00 0.60 33.00 0.35 37.00
4.11.2 Dia 600 mm Mtr. -- -- 61.00 72.00 2.00 80.00 1.80 88.00 1.40 102.00
4.11.3 Dia 900 mm Mtr. -- -- 127.00 154.00 550.00 176.00 4.80 198.00 3.50 231.00
4.11.4 Dia 1200mm Mtr. -- -- 193.00 231.00 550.00 253.00 4.80 275.00 3.50 308.00

G-4-1 [75]
 (Integrated Building BSR 2022 Rajasthan)

Add for each

1 Km beyond
20 Km

14

7.00

7.00
5.00
5.00
8.00
7.00
4.00

5.00
2.00

0.35
0.35
0.35

0.35
0.95
3.00
3.00

G-4-1 [76]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : G-4.2
Loading & Unloading
Chapter
Description Unit
Code No
1 2 3

4.12 Loading in or unloading cement of the Railway wagons at siding and M.T.
carrying the same from or into godowns adjacent to the siding, including
stacking the same properly in rows upto any height as per direction of
Engineer-in Charge, sweeping the wagons and screening the swept
cement and filling in bags complete.

4.13 Loading in or unloading from the Railway wagons and stacking as per
the direction of Engineer-in-Charge
4.13.1 Steel M.T
4.13.2 G.I., C.I. R.C.C. or C.C. pipes upto 500mm dia and similar heavy M.T
materials.
4.13.3 Full bitumen drums Each
4.13.4 Heavy materials where each piece or bundle, crate or case weight more M.T
than one tonne and R.C.C. C.I. and concrete pipes above 500 mm dia

Note :- The rates will be applicable in all cases whether material are unloaded
on or loaded from railway siding or directly unloaded on or loaded from
transport
No deduction shall be made from carriage rates for such direct
unloading or loading

4.14 Extra for sorting the steel size-wise inside the store yard and stacking M.T
the same for measurement within the lead of 100 meters as directed by
the Engineer-in-charge

G-4-2 [77]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

35.00

44.00
35.00

12.00
45.00

24.00

G-4-2 [78]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER G-5
HIRE CHARGES OF TENT ARTICLES
NOTE : Hire charges includes transporatation at site
within Muncipal Limits, Loading, Unloading,
Placing and removing complete.

Rate (Rs.)
Chapter Cost Rate (Rs.)
Description Unit
Code No (Rs.) 1st Day

1 2 3 4 5

5.1 Chairs :
5.1.1 PVC chair Each. 500.00 9.00

Plastic cane chair of Aluminium pipe with arms. Each. Deleted

5.1.2 Steel pipe pedded chair Each. 1200.00 30.00

5.2 Tables :
5.2.1 Wooden Table 6' x 3' (Babool). Each. 800.00 25.00
5.2.2 Wooden Table 6' x 2' (Babool). Each. 750.00 30.00
5.2.3 Centre Table sunmica Top 2'x4' Each. 1800.00 50.00
5.2.4 Centre Table Glass Top 2'x4' Each. 2250.00 150.00
5.2.5 Peg Table Sunmica Top 1'x1' Each. 800.00 15.00

5.3 Floor Covering :

5.3.1 Cotton Durry (Old). Sqm. 18.00 2.00
5.3.2 Cotton Durry (New). Sqm. 30.00 3.00
5.3.3 Non woven synthtic carpet (Red/Green) (New) Sqm. 160.00 25.00
5.3.4 Non woven synthtic carpet (Red/Green) (old) Sqm. 160.00 20.00
5.3.5 Woolen Carpet (New). Sqm. 600.00 35.00
5.3.6 Woolen Carpet (old). Sqm. 600.00 24.00

5.4 White Cotton chader (Sheet) (Washed) Sqm. 40.00 20.00

5.5 Pipe Pandal with covering ht from to 12 to 18 ft Sqm 30.00

5.6 Curtain cloth (View cutter ) made out of steel pipe Sqm 25.00
frame covering with good quality white cloth to cut
view including making holes and made necessary
strengthening support against wind pressure complete .

5.7 Kanat fixed with Tent. (15'x6') Each. 850.00 40.00

5.8 Kanat fixed without Tent. (15'x6') Each. 850.00 50.00

G-5 [79]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Chapter Cost Rate (Rs.)
Description Unit
Code No (Rs.) 1st Day

1 2 3 4 5

5.9 5mm Galvanised Iron (G.I) pipe 6 mtr. long with new Each. 72.00
silk flag.

5.10 Water Proof Tripal. Sqm. 10.00

5.11 Wooden stage height 60cm.with steps complete Sqm. 48.00

5.12 Wooden stage height 120 to 180 cm.with steps made of Sqm. 150.00
50 mm dia iron pipe frame with adjustable height
system and having smooth top wooden board complete .

5.13 Cotton mattress with white sheet (chader). Each 24.00

5.14 Dunlop mattress with white chadar size 6'x3'. Each. 40.00

5.15 Massand with white cover. Each. 14.00

5.16 Speech Stand having Sunmica top. Each. 2850.00 150.00

5.17 white cotton cloth cover for padded chair inculding Each. 10.00
ribbon

Barricading
5.18 Barricading with Sal ballies as per design including Rmt 33.00
tying with vertical post by coconut strings including
digging out holes in all types of soil complete in all
respect with two horizontal members height 1.2 m upto
1.5m above ground level and vertical supports upto 2.5
centre and upto 3 days period including removal and
cleaning the site complete in all respect & including
dressing of sides and providing retro reflective tapes for
traffic safety as per direction of Engineer-in charge in all
types of soil.

G-5 [80]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Chapter Cost Rate (Rs.)
Description Unit
Code No (Rs.) 1st Day

1 2 3 4 5
5.19 Barricading with M.S. Pipe as per design including Rmt. 28.00
tying with vertical post including digging out holes in all
types of soil complete in all respect with two horizontal
members height 1.2 m upto 1.5m above ground level
and vertical supports upto 2.5 centre and upto 3 days
period including removal and cleaning the site complete
in all respect & including dressing of sides and
providing retro reflective tapes for traffic safety as per
direction of Engineer-in charge in all types of soil.

5.20 Add extra for item No. 5.18 & 5.19 in barricading for Rmt
each subsequent day after 3 days

5.21 Making of holes in cement concrete/ Bitumenous road Each 185.00

by power driven hammer for barricating work as per
direction of Engineer in charge

5.22 Hire charges for folded type two seater sofa set (cum Each 240.00
bed) with good quality white cloth cover

5.23 VIP Chair with cushion Each 100.00

5.24 Add extra for hire charge for providing welded mesh Sqm 30.00
size 25x25 mm (16SWG) over barricating (excluding
hire charge of barricating)

5.25 Water Proof Tent with pipe pandal supported with Sqm 90.00
Bamboo/Balli /MS Pipe frame.

5.26 Water proofing canopy with ornamental frill, inner

ceiling & curtains
5.26 .1 Upto size 20'x20' Sqm 175.00

5.26.2 Above size 20'x20' Sqm 250.00

5.27 Deluxe sofa

5.27.1 Three Seater Each 700.00
5.27.2 Two Seater Each 500.00
5.27.3 Single Seater Each 300.00

G-5 [81]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Chapter Cost Rate (Rs.)
Description Unit
Code No (Rs.) 1st Day

1 2 3 4 5
5.28 Chemical toilet with house keeping arrangement and Each 6000.00
providing liquid soap, tissues, comb, freshener etc.

5.29 Water proof dome with truss steel strcture, inner ceiling
& curtains
5.29.1 60' span Sqm 225.00
5.29.2 80' span Sqm 250.00
5.29.3 90' span Sqm 260.00

5.30 Aluminium German Hanger Tent Roof made up of Sqm 400.00

Waterproof, Fire resistant Synthetic Rubber fabric of
885 GSM.

G-5 [82]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER G-5
ARGES OF TENT ARTICLES

Rate (Rs.)
Rate (Rs.)
Subsequent
days(per Day)
6

2.00

10.00

7.00
10.00
15.00
50.00
5.00

0.60
1.00
15.00
5.00
12.00
8.00

2.00

10.00

7.00

15.00

10.00

G-5 [83]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Rate (Rs.)
Subsequent
days(per Day)
6

33.00

4.00

12.00

50.00

10.00

12.00

5.00

60.00

4.00

G-5 [84]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Rate (Rs.)
Subsequent
days(per Day)
6

3.00

80.00

40.00

6.00

25.00

40.00

55.00

200.00
150.00
100.00

G-5 [85]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
Rate (Rs.)
Subsequent
days(per Day)
6
1200.00

45.00
50.00
52.00

80.00

G-5 [86]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-1
EARTH WORK
Note : The items in this Chapter will cover Earth Work for
Building and Sanitary Work.

Chapter
Description Unit
Code No
1 2 3

1.1 Earth work in surface excavation not exceeding 30cm. in depth but Sqm

exceeding 1.5 meter in width as well as10 Sqm on plan including

disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed

soil to be levelled and neatly dressed : All kinds of soil

1.2 Earth work in rough excavation, banking excavated earth in layers not Cum

exceeding 20cm in depth, breaking clods watering, rolling each layer

with 1/2 tonne roller, or stone or steel rammers and rolling every 3rd

and top- most layer with power roller of minimum 8-10 tonne capacity

and dressing up in embankment for roads, flood banks marginal banks

and guide banks or filling up ground depressions, lead up to 50 Mtr. and

lift up to 1.5 Mtr.:All kinds of soil

1.3 Banking excavated earth in layers not exceeding 20cm. in depth Cum

breaking clods watering, rolling each layer with 1/2 tonne roller, or

stone or steel rammers, and rolling every 3rd and top- most layer with

power roller of 8-10 tonne capacity and dressing up in embankments

for roads, flood banks marginal banks, and guide banks etc. lead up to

50 Mtr. and lift up to 1.5 Mtr. All kinds of soils

1.4 Deduct for not rolling with power roller of 8 to 10 tonne capacity for Cum

banking excavated earth in layers not exceeding 20 cm in depth.

1.5 Deduct for not watering the excavated earth for banking. Cum

BSR_B1 [87]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.6 Earth work in excavation by mechanical means (Hydraulic excavator )/ Cum

manual means over areas (exceeding 30cm in depth. 1.5m in width as
well as 10 sqm on plan) including disposal of excavated earth, lead upto
50m and lift upto 1.5 m , disposed earth to be levelled and neatly
dressed : All kinds of soil

1.7 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/

manual means over areas (exceeding 30 cm in depth, 1.5m in width as
well as 10 sqm on plan) including disposal of excavated earth, lead upto
50 m and lift upto 1.5 m , disposed earth to be levelled and neatly
dressed:
1.7.1 Ordinary rock Cum

1.7.2 Hard rock (requiring blasting) useful material 30% Cum

1.7.3 Hard rock(blasting prohibited) useful material 30% Cum

1.8 Earth work in excavation by mechanical means (Hydraulic Excavator )/ Cum

manual means in foundation trenches or drains (not exceeding 1.5 m in
width or 10 sqm on plan) including dressing of sides and ramming of
bottoms, lift upto 1.5 m, including taking out the excavated soil and
depositing and refilling of jhiri with watering & ramming and disposal
of surplus excavated soil as directed with in a lead of 50 meter. All
kinds of soils

1.9 Excavation work by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains not exceeding 1.5 m in width or
10 sqm on plan including dressing of sides and ramming of bottoms lift
upto 1.5 m, including getting out the excavated soil and disposal of
surplus excavated soil as directed with a lead in a 50 meter including
stacking of useful material if available :
1.9.1 Ordinary rock Cum

1.9.2 Hard rock (requiring blasting) useful material 30% Cum

BSR_B1 [88]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.9.3 Hard rock(blasting prohibited) useful material 30% Cum

1.10 Excavating trenches of required width for pipe cables, etc. including
excavation for sockets, and dressing of sides, ramming of bottoms,
depth up to 1.5 Mtr. including taking out the excavated soil, and then
returning the soil as required in layers not exceeding 20cm in depth
including consolidating each deposited layer by ramming, watering etc.
and disposal of surplus excavated soil as directed within a lead of 50
Mtr.: All kinds of soil
1.10.1 Pipes cables etc. not exceeding 80mm dia Mtr.
1.10.2 Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. Mtr.

1.10.3 Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm Mtr.
dia.

1.11 Add extra for excavating trench for pipes, cables etc. in all kinds of soil Mtr.

for depth exceeding 1.5 Mtr. but not exceeding 3 Mtr.

1.12 Add extra for excavating trench for pipes, cables etc. in all kinds of soil Mtr.

for depth exceeding 3 Mtr. but not exceeding 4.5 Mtr.

1.13 Excavating trenches of required width for pipes cables etc. including
excavation for sockets, depth up to 1.5 Mtr. including taking out the
excavated materials, refilling the soil as required in layers not exceeding
20cm in depth including consolidating each deposited layers by
ramming, watering etc., stacking serviceable material for measurements
and disposal of unserviceable material as directed, with in a lead of 50
Mtr.
1.13.1 ORDINARY ROCK
1.13.1.1 Pipes cables etc. not exceeding 80mm dia Mtr.
1.13.1.2 Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. Mtr.

1.13.1.3 Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm dia. Mtr.

BSR_B1 [89]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.13.2 HARD ROCK (REQUIRING BLASTING) USEFUL

MATERIAL 30% OF VOLUME EXCAVATED

1.13.2.1 Pipes cables etc. not exceeding 80mm dia Mtr.
1.13.2.2 Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. Mtr.

1.13.2.3 Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm dia. Mtr.

1.13.3 HARD ROCK (BLASTING PROHIBITED) USEFUL

MATERIAL 30% OF VOLUME EXCAVATED

1.13.3.1 Pipes cables etc. not exceeding 80mm dia Mtr.
1.13.3.2 Pipes cables, etc. exceeding 80mm dia but not exceeding 300mm dia. Mtr.

1.13.3.3 Pipes, cables etc. exceeding 300mm dia but not exceeding 600mm dia. Mtr.

1.14 Add extra for excavating trenches for pipes, cables, etc. in ordinary/hard Mtr.
rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over
corresponding basic item for depth upto 1.5 metre.)

1.15 Add extra for excavating trenches for pipes, cables, etc. in ordinary/hard Mtr.
rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over
corresponding basic item for depth upto 1.5 metre.)

1.16 P & F Close timbering in trenches including strutting, shoring and

packing cavities (wherever required) etc. Complete (Measurement to be
taken of the face area timbered):
1.16.1 Depth not exceeding 1.5 Mtr. Sqm
1.16.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.16.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

1.17 P & F Close timbering in case of shafts, wells, soak pits, man-holes and
the like including strutting, shoring and packing cavities (wherever
required) etc complete (Measurement to be taken of the face area
timbered):
1.17.1 Depth not exceeding 1.5 Mtr. Sqm
1.17.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.17.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

BSR_B1 [90]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.18 P & F Close timbering over area including strutting, shoring and
packing cavities (wherever required) etc. complete (Measurement to be
taken of the face area timbered):
1.18.1 Depth not exceeding 1.5 Mtr. Sqm
1.18.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.18.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

1.19 Add extra for planking, strutting and packing material for cavities (in Sqm
close timbering) if required to be left permanently in position (face area
of timber permanently left to be measured)

1.20 P & F of Open timbering in trenches including strutting, shoring

complete (measurements to be taken of the face area timbered)

1.20.1 Depth not exceeding 1.5 Mtr. Sqm
1.20.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.20.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

1.21 P & F of Open timbering in case of shafts, wells, soak pits, manholes
and the like including strutting, shoring complete (Measurement to be
taken of the face are timbered):
1.21.1 Depth not exceeding 1.5 Mtr. Sqm
1.21.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.21.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

1.22 P & F Open timbering over area including strutting, shoring etc

complete (Measurement to be taken of the face are timbered):

1.22.1 Depth not exceeding 1.5 Mtr. Sqm
1.22.2 Depth exceeding 1.5 Mtr. but not exceeding 3 Mtr Sqm
1.22.3 Depth exceeding 3 Mtr. but not exceeding 4.5 Mtr Sqm

1.23 Add extra for planking and strutting in open timbering if required to be Sqm
left permanently in position (face area of timber permanently left to be
measured)

1.24 Add extra rate for quantities of works, executed :

1.24.1 In or under water and /or liquid mud, including pumping out water as P.Mtr.
required depth
1.24.2 In or under foul position , including pumping out water as required P.Mtr.
depth

BSR_B1 [91]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Note :- Note for item no. 1.24:- The extra percentage rate is applicable in
respect of each item but limited to quantities of work executed in these
difficult conditions. The unit, namely, metre depth, to be considered for
payment, shall be the depth measured from the sub soil water level up to
the centre of gravity of the qty executed in difficult condition. The depth
shall be reckoned correct to 0.10m, 0.05m or more shall be taken as
0.10m and less than 0.05m ignorel.

1.25 Filling available excavated earth (excluding rock) in trenches, plinth side Cum
of foundation etc. in layers not exceeding 20 cm. in depth, consolidating
each deposited layer by ramming and watering including lead up to 50
meter and with all lift.

1.26 Add extra for foundation/trenches/drains for every additional lift of 1.5
Mtr. or part thereof in
1.26.1 All kinds of soil Cum
1.26.2 Ordinary or hard rock. Cum

1.27 (a) Supplying and Filling in plinth with river sand under floors including Cum
watering ramming consolidating and dressing complete including cost of
sand

1.27 (b) Supplying and Filling in plinth with blown sand under floors including Cum
watering ramming consolidating and dressing complete including cost of
sand.

1.28 Surface dressing of the ground including removing vegetation and Sqm

inequalities not exceeding 15cm deep and disposal of rubbish lead up to

50 Mtr. and lift up to 1.5 Mtr. : All kinds of soil

1.29 Ploughing the existing ground to a depth of 15 cm to 25 cm and Sqm

watering the same : All kinds of soil

BSR_B1 [92]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.30 Excavating holes upto 0.5 cum including getting out the excavated soil,
then returning the soil as required in layers not exceeding 20 cm in
depth, including consolidating each deposited layer by ramming,
watering etc, disposing of surplus excavted soil; as directed within a
lead of 50 m and lift to 1.5 m
1.30.1 All kinds of soil Cum
1.30.2 Ordinary rock Cum
1.30.3 Hard rock (requiring blasting) useful material 30% Cum
1.30.4 Hard rock(blasting prohibited) useful material 30% Cum

1.31 Clearing jungle including uprooting of rank vegetation, grass, brush Sqm

wood, trees and saplings of girth upto 30 cm measured at a height of 1 m

above ground level and removal of rubbish upto a distance of 50 m

outside the periphery of the area cleared.

1.32 Clearing grass and removal of the rubbish upto a distance of 50 m Sqm
outside the periphery of the area cleared.

1.33 Felling trees of the girth (measured at a height of 1 m above ground

level) including cutting of trunks and branches removing the roots and
stacking of serviceable material and disposal of unserviceable material.
1.33.1 Beyound 30 cm girth upto including 60 cm girth Each

1.33.2 Beyound 60 cm girth upto including 120 cm girth Each

1.33.3 Beyound 120 cm girth upto including 240 cm girth Each

1.33.4 Above 240 cm girth Each

1.34 Supplying chemical emulsion in sealed containers including delivery as litre

specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%

BSR_B1 [93]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.35 Diluting and injecting by hand operated pressure pumps chemical Emulsion
timber ground treatment [TCGT] in ratio 1: 2 as per manufacturers
specification for POST CONSTRUCTIONAL Anti-termite treatment (as per
IS 6313) part - III 1971 as amended from time to time) (excluding the cost of
chemical emulsion) :
1.35.1 Along external wall where the apron is not provided using chemical metre
emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to
a depth of 300mm including excavation channel along the wall &
rodding etc. complete : With Chlorpyriphos/Lindane E.C. 20% with
1% concentration

1.35.2 Along the external wall below concrete or masonry apron using metre
chemical emulsion @ 2.25 litres per linear metre including drilling and
plugging holes etc. With Chlorpyriphos/Lindane E.C. 20% with 1%
concentration

1.35.3 Treatment of soil under existing floors using chemical emulsion @ one sqm
litre per hole, 300 mm apart including drilling 12 mm diameter holes
and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to
match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with
1% concentration

1.35.4 Treatment of existing masonry using chemical emulsion@ one litre per metre
hole at 300mm interval including drilling holes at 45 degree and
plugging them with cement mortar 1:2(1 cement : 2 coarse sand) to the
full depth of the hole. With Chlorpyriphos/Lindane E.C. 20% with
1% concentration

1.35.5 Treatment at points of contact of wood work by chemical emulsion metre

Chlorpyriphos/Lindane (in oil or kerosene based solution) @ 0.5 litres
per hole by drilling 6 mm dia holes at downward angle of 45 degree at
150mm centre to centre and sealing the same. With
Chlorpyriphos/Lindane E.C. 20% with 1% concentration

BSR_B1 [94]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.36 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% sqm
concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS
6313 part III as amended from time to time and creating a continuous
chemical barrier under and around the column pits, wall trenches, basement
excavation, top surface of plinth filling, junction of wall and floor along the
external perimeter of building expansion joints, over the top surface of
consolidated earth of which aproch is to be laid surrounding of pipes and
conduits etc. complete as per specification (Plinth floor area only shall be
measured for payment and excluding the cost of chemical emulsion) .

1.37 Drilling borehole and conducting standard penetration test from ground level
and upto the depth given below or upto refusal whichever occurs earlier as per
IS:2131-1981 and IS 2132-1986.The work also includes the determination of
Safe Bearing Bearing capacity as per IS:6403-1981 and IS:8009-1976 from
disturrbed and undisturbed samples. The following properties should be also
reported as per related IS codes .The whole work should be done as per
direction given by Engineerand -in-charge and upto satisfaction of Engineer in
Charge.
(i) Grain Size Anaylsis
(ii) Atterberg's Limit
(iii) Bulk Density
(iv) Moisture Cotent
(v) Specific Gravity
(vi) Shear Parameters including Cohesion and Angle of Internal Friction

(a) Upto 6m depth Each

(b) upto 10m depth Each

1.38 Anti-termite treatment of existing floor and wall using Imidacloprid Sqm
30.5% EC non repellent, odorless, low dose, environimentally safe
Termiticide with rapid action non corrosive stain free, by injecting the
emulsion as per specification and plugging with cement mortar 1:2 ( 1
cement : 2 coarse sand) in the whole floor area. The pesticide emulsion
of imidacloprid 30.5% EC mixed with water in the ration of 1:474 will
be pumped by a motorized spray pump specified manner. The net floor
and wall area treated will be measured for payment.

BSR_B1 [95]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.39 Anti termite treatment of floor using Imidacloprid 30.5% EC non Sqm
repellent, odorless, low dose, environmentally safe terniticide with rapid
action non corrosive stain free, by drilling 12mm diameter holes 300mm
apart injecting the emulsion as per specification and plugging with
cement mortar 1:2 ( 1 cement : 2 coarse sand) in the whole floor area
DPE 12mm dia termitube system with required number of junction
boxes are to be installed. The termitube will run all along the perimeter
wall both inside and outside. In the middle area the termitube to be
installed at an interval of 1.00 Mtr. or less both ways as required with
sufficient number of junction boxes to pump the emulsion. After
successful testing of termitube, pesticide emulsion of imidacloprid
30.5% EC mixed with water in the ration of 1:474 will be pumped by a
motorized spray pump from the junction box in specified manner. The
plinth area of the area treated will be measured for payment.

BSR_B1 [96]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-1
ARTH WORK

Rate (Rs.)
4

35.00

272.00

171.00

3.00

12.00

BSR_B1 [97]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

175.00

251.00

410.00

540.00

178.00

268.00

444.00

BSR_B1 [98]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

551.00

116.00
187.00

294.00

1.41%

3.61%

162.00
399.00

458.00

BSR_B1 [99]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

243.00
604.00

696.00

295.00
730.00

843.00

104%

130.00%

95.00
99.00
109.00

99.00
107.00
118.00

BSR_B1 [100]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

84.00
89.00
96.00

1254.00

47.00
50.00
54.00

41.00
46.00
53.00

30.00
32.00
39.00

629.00

20%

25%

BSR_B1 [101]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

64.00

34.00
61.00

1024.00

450.00

9.00

9.00

BSR_B1 [102]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

94.00
135.00
243.00
296.00

5.00

2.00

140.00

620.00

2875.00

5768.00

243.00

BSR_B1 [103]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

12.00

17.00

87.00

13.00

124.00

BSR_B1 [104]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

47.00

8635.00
11550.00

90.00

BSR_B1 [105]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
216.00

44373.84

BSR_B1 [106]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-2
MORTAR
NOTE :
1 Complete rate for mortar is inclusive of cost of material, T & P & cost
of water with all leads and lifts involved.
2 Compressive strength of mortars shall be as per the relevant
specifications.
3 Cement mortar shall be prepared by mechanical mixer only.

Chapter
Description Unit
Code No
1 2 3

CEMENT SAND MORTAR :

2.1 Cement sand Mortar 1 : 2 (1 cement : 2 sand) Cum

2.2 Cement sand Mortar 1 : 3 (1 cement : 3 sand) Cum
2.3 Cement sand Mortar 1 : 4 (1cement : 4 sand) Cum
2.4 Cement sand Mortar 1 : 5 (1 cement : 5 sand) Cum
2.5 Cement sand Mortor 1 : 6 (1 cement : 6 sand) Cum
2.6 Cement sand Mortor 1 : 8 (1 cement : 8 sand) Cum
2.7 Cement sand Mortar 1:10 (1 cement :10 sand) Cum

CEMENT MARBLE POWDER MORTAR :

2.8 Cement marble powder mortar 1 : 2 (1-cement : 2-marble powder) Cum

2.9 Cement marble powder mortar 1 : 4 (1cement : 4-marble powder) Cum

2.10 White cement marble powder mortar 1 :2 (1 white cement : 2 marble Cum
powder
2.11 White cement marble powder mortar 1:3 (1 white cement : 3 marble Cum
powder)
2.12 White cement marble powder mortar 1:4 (1 white cement : 4 marble Cum
powder)

MUD MORTAR :

2.13 Mud Mortar including specified ingredients. Cum

BSR_B2 [107]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-2
MORTAR

Rate (Rs.)
4

5015.00
4145.00
3401.00
3001.00
2658.00
2200.00
1953.00

4936.00

2912.00

12185.00

9471.00

6171.00

228.00
58276.00

BSR_B2 [108]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-3
CONCRETE WORK
NOTE :
1 The rates are for all lead of cement, ballast, sand, and grit etc. at site of
work and are inclusive of laying and mixing, all T & P, mixer, vibrator
with P.O.L, scaffolding etc. including cost of curing.
2 For all concrete work only coarse sand shall be used.
3 Concrete mix prepared by power-driven mechanical mixer shall be used.

4 Under exceptional conditions, where mechanical mixer and vibrator are

not used (with the approval of Engineer-in-Charge) rates to be reduce by
15%, for mechanical mixer and 10 % for vibrator.

Chapter
Description Unit
Code No
1 2 3

CEMENT CONCRETE (CAST-IN-SITU):

3.1 Providing and laying in position cement concrete including curing,

compaction etc. complete in specified grade excluding the cost of
centering and shuttering - All work up to plinth level.

3.1.1 M20 grade Nominal Mix Cum

1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size).
3.1.2 M15 grade Nominal Mix Cum
1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size).
3.1.3 M15 grade Nominal Mix Cum
1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm
nominal size).
3.1.4 M10 grade Nominal Mix Cum
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size).
3.1.5 M10 grade Nominal Mix Cum
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm
nominal size).
3.1.6 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm Cum
nominal size).
3.1.7 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm Cum
nominal size).
BSR_B3 [109]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

3.2 Providing and laying cement concrete including curing, compaction etc.
complete in retaining walls, return walls, walls (any thickness) including
attached pilasters, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bed blocks, anchor
blocks, plain window sills, fillets, levelling course etc up to floor five
level excluding the cost of centering and shuttering.

3.2.1 M20 grade Nominal Mix Cum

1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size).
3.2.2 M15 grade Nominal Mix Cum
1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size).
3.2.3 M15 grade Nominal Mix Cum
1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm
nominal size).
3.2.4 M10 grade Nominal Mix Cum
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size).
3.2.5 M10 grade Nominal Mix Cum
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm
nominal size).

CEMENT CONCRETE (PRE-CAST):

3.3 Providing and fixing up to floor five level pre cast cement concrete
string or lacing courses, copings, bed plates, anchor blocks, windows
sills, shelves, louvers steps, staircases, etc. including carriage, hoisting
and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand)
cost of required centering, shuttering and finishing smooth with 6 mm
thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surface,
including all T & P, curing etc. complete:

3.3.1 M15 grade Nominal Mix Cum

1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size).

BSR_B3 [110]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.3.2 M10 grade Nominal Mix Cum
1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm
nominal size).

3.4 Add Extra for concrete work in superstructure above floor V level for Cum
each four floors or part thereof.

3.5 Add Extra for laying concrete in or under water or liquid mud including Per Cum
per Mtr.
depth
cost of pumping or bailing out water and removing slush etc. complete.

Note : The quantity will be calculated by multiplying the depth measured from
the sub-soil water level up to centre of gravity of concrete under sub-soil
water level with quantity of concrete in cum executed under sub-soil
water. The depth of centre of gravity shall be reckoned correct to 0.1 m;
0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored.

3.6 Add Extra for laying concrete in or under foul positions. Cum

DAMP- PROOF COURSE AND PRECASTCOPING

3.7 Providing and laying damp-proof course with cement concrete grade M-150 (1
: 2 : 4) mortar prepared with 1% solution of water-proof compound complete
as per specification .
3.7.1 50mm thick. Sqm

3.7.2 75mm thick. Sqm

3.8 Providing & fixing precast cement concrete coping 1 : 2 Sqm

: 4 mix 50mm thick complete as per specification :

BSR_B3 [111]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.9 Cement, Concrete flooring/ cement plaster/ Cement Concret Road, Plain Per Pack
125 gm.
or RCC work & water retaining works providing and mixing Additive of
Synthetic polypropylene Fibrillated mesh fibers free form any reprocess
Olefins &comfirming to ASTM C 1116 Type III 4.1.3 Having grade
6mm/12mm /18mm melting point of 165 deg.C., strength>600 mpa Sp.
Gravity:0.92g/cc, diameter 10-70 microns. It is required in specified
ratio @ 0.25% (125 Gm. Fibers in 50 Kg. cement) for use. Mix it
directly with contents in rotating site mixer direction of Engineer in
charge with all leads and lifts.

3.10 Cement, Concrete Flooring/Cement Plaster/Cement Comcrete Road, per 100

Plain or RCC work & water retaining works providing and mixing gram pack
admixture of Synthetic Nylon-6 Fibres or polycaprolactam free from any
reprocess Olefins & confirming to ASTM C 1116 Type III 4.1.3 Having
grade 6mm / 12 mm /18 mm melting point 220 deg. C, Sp. Gravity:1.14
g/cc, diameter 10-40 microns. It is required in specific ratio @ 0.20%
(100 gm Fibres in 50 Kg Cement) for use as specified by manufacture
specification and direction of Engineer In-charges with all leads and
lifts.

BSR_B3 [112]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-3
NCRETE WORK

Rate (Rs.)
4

4915.00

4624.00

4544.00

3847.00

3731.00

3302.00

2956.00

BSR_B3 [113]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5451.00

5112.00

5018.00

4320.00

4204.00

6987.00

BSR_B3 [114]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
6195.00

408.00

279.00

125.00

391.00

546.00

367.00

BSR_B3 [115]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
66.00

61.00

67449.00

BSR_B3 [116]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-4
REINFORCED CONCRETE WORK
Note:
1 Rates for complete work laying, compaction, vibration, curing and all

types of T & P, including P.O.L. etc and grinding and mixing of mortar.

2 The rates for centering and shuttering are for steel plates shuttering for
complete work including centering, shuttering nails and other such items
required. The shuttering shall be removed after required time as per
instruction by Engineer-in-charge & IS 456:2000.

3 The Concrete for all grade shall be produced in conformation to the laid
down procedures and all relevant clauses of IS 456 : 2000 and further
amendments.

4 If any machinery like mechanical mixture machine, vibrator or

mechanical mortar miller etc. is supplied by the Department, the hire
charges as per department rate will be charged and transportation cost
will be borne by the contractor.

5 No R.C.C. work shall be permitted without the use of mechanical mixer

by hopper and vibrator.

6 Contractor at site shall arrange a stand by mechanical mixer and extra

vibrator if more than 20 cum of RCC is to be done in a single day.

7 The rate for R.C.C. work is inclusive of cost of providing cement

mortar covers Blocks. The rates for centering includes placement of
cover blocks.

8 (a) For Design mix ,the producer / manufacturer / contractor shall obtain
mix proportions of each grade of concrete from a recognized laboratory
and submit detail to the Engineer-in-charge for approval. Concrete of
any particular design mix and grade shall be produced / manufactured by
weight batched hopper mechnical mixer with assigned capacity of
mixing drum as directed by Engineer-in-charge.

BSR_B4 [117]
 (Integrated Building BSR 2022 Rajasthan)

8 (b) For Nominal mix concreting work,the coarse aggregates and fine
aggregates will be measured by the standard boxes and cement by
bag.The boxes should be designed for 1/2 bag,1 bag etc. of cement.

9 If any change required in the approved Job Mix design ingredient, Fresh
Job Mix design shall be obtain by the contractor from approved lab and
shall be got approved from Engineer-in-charge

Chapter
Description Unit
Code No
1 2 3

CAST-IN-SITU CONCRETE:

4.1 Providing and laying in position specified grade of cement concrete for Cum
all RCC structural elements upto plinth level including curing,
compaction, finishing with rendering in cement sand mortar 1:3 (1
cement: 3 coarse sand) and making good the joints and cost of
plastizers( if required) excluding the cost of centering, shuttering and
reinforcement.
M20 grade Nominal Mix / Design Mix

4.2 Providing and laying in position specified grade of cement concrete for Cum
RCC structural elements upto floor five level including curing,
compaction, finishing with rendering in cement sand mortar 1:3 (1
cement: 3 coarse sand) and making good the joints and cost of plastizers
(if required ) excluding the cost of centering, shuttering and
reinforcement for Walls (any thickness) including attached pilasters,
buttresses, plinth and string courses, fillets, columns, pillars, piers,
abutments, posts and struts etc.
M20 grade Nominal Mix / Design Mix

BSR_B4 [118]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.3 Providing and laying in position specified grade of cement concrete for Cum
RCC structural elements upto floor five level including curing,
compaction, finishing with rendering in cement sand mortar 1:3 (1
cement: 3 coarse sand) and making good the joints and cost of
plastizers( if required) excluding the cost of centering, shuttering and
reinforcement for Beams, suspended floors, roofs, griders having slopes
up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain
windows sills, staircases and spiral staircases etc.
M20 grade Nominal Mix / Design Mix

4.4 Providing and laying in position specified grade of cement concrete for Cum
RCC structural elements upto floor five level including curing,
compaction, finishing with rendering in cement sand mortar 1:3 (1
cement: 3 coarse sand) and making good the joints and cost of
plastizers( if required) excluding the cost of centering, shuttering and
reinforcement for Arches, arch ribs, domes, vaults, shells, folded plate,
chimneys, shafts , roofs having slope more than 15º ,vertical and
horizontal fins individually or forming box louvers, facias and eaves
boards M20 grade Nominal Mix / Design Mix

4.5 Providing and laying in position Ready mix concrete manufactured in Cum
fully automatic Batching Plant and transported to site in transit mixer
for having continous agitated mixer, manufactured as per approved mix
design of specified grade of RCC work including pumping of R.M.C.
from transit mixer to site of laying , exculding the cost of centering,
shuttering and reinforcement with all lead and lift including cost of
admixtures in recommended portion as per IS 9103 to accelerate/ retard
setting of concrete, improve workability without impairing strength and
durability as per direction of Engineer in charge. All works upto floor
V floor M20 grade Design Mix by using cement as per codal
provision.

4.6 Add extra for providing richer mixes respectively at all floor levels

BSR_B4 [119]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.6.1 Providing M-25 grade concrete by using cement as per codal Cum
provision instead of M-20 grade design mix.
4.6.2 Providing M-30 grade concrete by using cement as per codal Cum
provision instead of M-20 grade design mix.
4.6.3 Providing M-35 grade concrete by using cement as per codal Cum
provision instead of M-20 grade design mix.
4.6.4 Providing M- 40 grade concrete by using cement as per codal Cum
provision instead of M-20 grade design mix.

4.7 Add extra for RCC work in superstructure above floor five level for Cum
each four floor or part thereof .

4.8 Deduct for using less cement quantity than the quantity as provided in Kg
the item of design mix concrete/RMC as arrived as per mix design.(on
cement quantity)

FORM WORK

4.9 Centering and Shuttering with plywood or steel sheets including Sqm.
strutting, propping bracing both ways and removal of formwork for
foundation , footings, strap beam, raft , bases of columns etc.

4.10 Centering & shuttering with plywood or steel sheets including strutting,
propping bracing both ways with steel props and removal of formwork
for upto floor five level for :
4.10.1 Walls (any thickness) including attached pilasters, buttresses Sqm
plinth and string course.
4.10.2 Suspended floors, roofs, landings, staircases, balconies, girders, Sqm
cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas,
lintel, beam, plinth beam etc.
4.10.3 Columns, pillars, posts and struts etc. Sqm.
4.10.4 Spiral staircases, chimneys shafts etc. Sqm.
4.10.5 Arches, domes, vaults etc. up to 6 Mtr span. Sqm.
4.10.6 Arches, domes, vaults etc exceeding 6 Mtr span Sqm.
4.10.7 Vertical and horizontal fins individually or forming box louvers band, Sqm.
facias and eaves boards.
4.10.8 Add extra for shuttering in circular work (in respective centering and Sqm
shuttering items)
4.10.9 Cornices and mouldings Sqm
4.10.10 Grid roofing with panel area less than 2.25 Sqm. (contact area to be Sqm
measured).

BSR_B4 [120]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.10.11 Deduct for using wooden vertical member instead of steel props Sqm
Note : The uses of wooden member is allowed in works which A & F
sanction up to 25 lacs only.

4.11 Add extra for additional height in centring, shuttering where ever Sqm
required with adequate bracing, propping etc. including cost of de-
shuttering and decentring at all levels, over a height of 3.5 m, for every
additional height of 1 metre or part thereof (Plan are is to be measured)

4.12 Add extra for centering and shuttering work in superstructure above Sqm.

floor five level for each four floor or part thereof .

STEEL REINFORCEMENT:

4.13 Providing and fabricating reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position and binding
(including cost of binding wire) all complete up to floor five level.
('Original producers' who manufacture billet directly from iron
ores and roll the bilets to produce steel conforming to IS:1786)

4.13.1 Cold twisted deformed bars (IS : 1786). Kg.

4.13.2 Hot rolled deformed bars (IS : 1139). Kg.
4.13.3 Thermo-mechanically Treated bars (Conforming of relevent IS code) Kg.

4.14 Labour charges for cutting, bending for fabrication and binding Kg.
reinforcement (plain or tor/ribbed/TMT steel) as per drawing and design
for R.C.C. and R.B. work including cost of binding wire with all lead
and lift up to floor five level complete.

4.15 Add extra for reinforcement in superstructure above floor five level for Kg
each four floor or part thereof .

BSR_B4 [121]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

PRECAST CEMENT CONCRETE

4.16 Providing and fixing of 200mm thick RCC precast panel made of M35 Sqm
grade concrete with required steel, rebar chair, wire mesh, connection
bolt, fastener and beveled washer with erection ready complete in all
respect with all lead.

4.17 Providing and fixing of 150 mm thick RCC precast panel made of M35 Sqm
grade concrete with required steel, rebar chair, wire mesh, connection
bolt, fastener and beveled washer with erection ready complete in all
respect with all lead.

4.18 Providing, hoisting and fixing up to floor five level precast reinforced
concrete work in Nominal M20 grade mix including cost of required
centering, shuttering, finishing, smooth with 6 mm thick cement plaster
1:3 (1 cement: 3 fine sand) on exposed surface complete excluding cost
of reinforcement
4.18.1 String courses, copings, bed plates, anchor blocks, plain window sills etc Cum

4.18.2 Small lintels not exceeding 1.5 m clear span Cum

4.18.3 Mouldings as in cornices, windows sills etc. Cum

4.18.4 Lintels beams and bressumers including setting in cement mortar 1:3 (1 Cum

cement: 3 coarse sand) aggregate 20mm nominal size).

4.18.5 Beams, Columns, slabs, Shelves, Vertical & horizontal fins individually Cum
or forming box louvers setting in cement mortar 1:2 (1 cement: 2 sand)
or grouts as per requirements

4.19 Providing, hoisting and fixing up to floor five level precast cement
concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
6mm nominal size) reinforced with 1.6 mm dia Mild steel wire
including centring and shuttering, roughening cleaning, fixing and
finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as
per approved design excluding plastering of jambs, sills and soffits
4.19.1 50mm thick Sqm

BSR_B4 [122]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.19.2 40 mm thick Sqm.

4.19.3 30mm thick Sqm.

4.20 Add extra over for both side jali Sqm.

ENCASING ROLLED STEEL SECTION

4.21 Encasing rolled steel section in beams and columns, with M20 Nominal Cum
Mix cement concrete including centering and shuttering complete but
excluding cost of reinforcement.

4.22 Encasing rolled steel section in grillages with M20 Nominal Mix Cum
including centering and shuttering complete but excluding cost of
expanded metal and hangers.

4.23 Add Extra for providing and fixing expanded metal mesh of size Sqm.
20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg. per
sqm. for encasing of rolled steel sections in beams, columns and
grillages excluding cost of hangers.

BSR_B4 [123]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.24 Providing ,arranging and erecting 50mm dia M.S. pipe cup lock
shuttering arrangement above the ground level upto the height given
below. The girding arrangement of cup lock system should have 2.50
meter 3.00 meter long coupling pipes and 0.90mt long lacer pipe
(Horizontal bracing pipes) reconnected in both ways so as to make a
square grid of size 0.90x0.90 meter in plan. The Horizontal bracing and
lacer pipes should have a maximum spacing of 1.50 meter c/c both
ways. The bottom of the coupling pipe must rest over a firm support at
ground. the shuttering plates of 900mmx600mm size duly braced by
angle supports and should rest over 50mmx50mm size wooden logs
supported by 75x40x6mm size channels and U-Jacks made of
M.S.25mm dia steel bars with adjustable thread and lock arrangement
placed at a spacing of 0.60 meter c/c. The whole arrangement should be
duly shored from ground by U-Jacks and lacer pipes to prevent any
lateral movement during casting of slabs. Additional support as per
direction of engineer in charge are also to by provided wherever felt
necessary. The work would include transportation of material erecting
the whole grid structure, bracing both way, shoring, leveling of
shuttering and removal of form work complete as per direction of
Engineer in charge for all the floors upto the height of:-
(a) Upto 6.63 meter height Sqm.
(b) Upto 9.14 meter height Sqm.

4.25 Rebarring work in old R.C.C structures including making bore hole to
adjust required bar diameter and filling a good quality filler to provide a
tensil strength as per requirement and fix the Bar to the saction including
cost of bars.
(i) 8 mm bar Each
(ii) 10 mm bar Each
(iii) 12 mm bar Each
(iv) 16 mm bar Each
(v) 20 mm bar Each
(vi) 25 mm bar Each

BSR_B4 [124]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-4
ED CONCRETE WORK

BSR_B4 [125]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

4934.00

5609.00

BSR_B4 [126]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5185.00

5561.00

6089.00

BSR_B4 [127]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

69.00

139.00

194.00

242.00

112.00

7.00

157.00

289.00

340.00

375.00
301.00
879.00
329.00
494.00

20%

474.00
405.00

BSR_B4 [128]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

20%

171.00

34.00

77.00
77.00
77.00

12.00

3.00

BSR_B4 [129]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

4076.00

3847.00

7030.00

9163.00
10262.00

8636.00

13036.00

630.00

BSR_B4 [130]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

534.00

492.00

20%

8460.00

5607.00

381.00

BSR_B4 [131]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

958.00
1722.00

429.00
468.00
528.00
831.00
1078.00
1559.00
112362.60

BSR_B4 [132]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-5
BRICK WORK
Note :
1 Fly ash bricks shall be invariably be used in building works except petty
or repair works, where clay bricks can be used.
Chapter
Description Unit
Code No
1 2 3

5.1 Brick masonry with F.P.S. bricks of class designation 75 in foundation

and plinth with bricks

5.1.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum.

5.1.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Cum.
5.1.3 Mud mortar Cum.

5.2 Brick work with F.P.S. bricks of class designation 75 in superstructure

above plinth level upto floor V level in all shapes and sizes in :

5.2.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum.

5.2.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Cum.
5.2.3 Mud mortar Cum.

5.3 Add extra for Square or Rectangular Pillars in Superstructre brick work
up to five storey

5.3.1 Upto 45 cm length and all sides are free Cum

5.3.2 Upto 45 cm length and two corners are free Cum
5.3.3 Upto 90 cm length and all sides are free Cum
5.3.4 Circular Pillars Cum.

5.4 Brick work in plain arches in super structure upto five storey in cement Cum.
mortar 1 : 3 including centering and shuttering complete span upto 6
Mtr. with Brick of class designation 75.

5.5 Brick work in gauged arches in super structure upto five storey in Cum.
cement mortar 1 : 3 including centering and shuttering complete span
upto 6 meter with Brick of class designation 75.

5.6 Add extra for additional cost of centering for arches exceeding 6m span Cum
including all shuttering , bolting wedging and removal.(Area of the
soffit to be measured)
BSR_B5 [133]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

5.7 Half brick masonry in foundation & plinth using bricks of designation
75

5.7.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) Sqm.

5.7.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm.
5.7.3 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Sqm.

5.8 Half brick masonry in Superstructure , above plinth level upto floor V
level using bricks of designation 75
5.8.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) Sqm.
5.8.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm.
5.8.3 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Sqm.

5.9 Add extra providing and placing in position 2 Nos. ,6mm Ø M.S. bar at Sqm
every third course of half brick masonry .

5.10 Brick work in partition in super structure upto five storey 7cm. thick

(brick on edges) using bricks of class designation 75 in :

5.10.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) Sqm.
5.10.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm.

5.11 Honey comb brick work half brick thick with bricks of class
designation 75 upto five storey in:
5.11.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm.
5.11.2 Cement mortar1 : 6(1 cement : 6 coarse sand Sqm.

5.12 Add extra over for laying brick work in or under water and or liquid P.Cum.
P.-
mud including cost of pumping of or bailing out water and removal of Mtr.
slush etc. complete. depth
Note : The quantity will be calculated by multiplying the depth measured from

the sub-soil water level up to centre of gravity of concrete under sub-soil

water level with quantity of concrete in cum executed under sub-soil

water. The depth of centre of gravity shall be reckoned correct to 0.1 m;

0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored.

BSR_B5 [134]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
5.13 Add extra for laying bricks work in or under foul condition. Cum.

5.14 Brick work in super structure upto five storey with selected bricks of Cum
class designation 75 in exposed brick work including making horizontal
and vertical grooves 10mm. wide 12mm. deep complete in cement
mortar 1:6.

5.15 Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class
designation 75 in superstructure above plinth level upto floor five level
in :
5.15.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum
5.15.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Cum

5.16 Brick work with mechanised autoclaved flyash lime bricks conforming
to IS: 12894 :2002 of class designation 100 in superstructure above
plinth level upto floor V level in.
5.16.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum
5.16.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Cum

5.17 Add extra for brick work in superstructure above floor five level, for
each four floors or part thereof.
5.17.1 Quantity in Cum. Cum.
5.17.2 Quantity in Sqm. Sqm.

5.18 Add extra over item of brick work with class designation 100 in
substitution of class designation 75 :
5.18.1 Quantity in Cum. Cum.
5.18.2 Quantity in Sqm. Sqm.

5.19 Half Brick work with mechanised autoclaved flyash lime bricks
conforming to IS: 12894 :2002 of class designation 100 in
superstructure above plinth level upto floor V level in.
5.19.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm
5.19.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Sqm

BSR_B5 [135]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
5.20 Half Brick work with mechanised autoclaved flyash lime bricks
conforming to IS: 12894 :2002 of class designation 75 in superstructure
above plinth level upto floor V level in.
5.20.1 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Sqm
5.20.2 Cement mortar 1 : 6 (1 cement : 6 coarse sand) Sqm

5.21.1 Providing and laying Autoclaved Aerated Concrete (AAC) blocks Cum.
masonary 100mm/125mm thick with Grade-I AAC blocks of density
551 to 650 kg/cum conforming to IS : 2185 (Part-3) in superstructure
above plinth level upto floor V level in cement mortar 1:4 (1 cement : 4
coarse sand). The rate includes providing and placing in position 2 Nos.
6 mm dia MS bars at every third course of masonary work.

5.21.2 Providing and laying Autoclaved Aerated Concrete (AAC) blocks Cum.
masonary 150mm/230mm/300mm thick with Grade-I AAC blocks in
superstructure above plinth level upto floor V level with RCC band at
sill level and lintel level with approved block laying polymer modified
adhesive mortar all complete as per direction of Engineer-in-charge.
(The payment of RCC band and reinforcement shall be made for
seperately).

5.21.3 Add extra for AAC block masonary work in superstructure above floor Cum.
five level, for each four floors or part thereof.

BSR_B5 [136]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-5
RICK WORK

Rate (Rs.)
4

4469.00
4263.00
3265.00

5196.00
4990.00
3792.00

327.00
163.00
278.00
331.00

6762.00

8015.00

314.00

BSR_B5 [137]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

525.00
497.00
470.00

583.00
553.00
526.00

64.00

396.00
377.00

360.00
342.00

293.00

BSR_B5 [138]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
119.00

5055.00

5038.00
4832.00

4912.00
4645.00

260.00
23.00

163.00
19.00

586.00
557.00

BSR_B5 [139]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

564.00
536.00

5404.00

4752.00

260.00

84876.00

BSR_B5 [140]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-6
STONE MASONRY
Note :
1 Rates provided are for the complete finished items inclusive of cost of
water and materials with all leads labour, all type of taxes, royalty,
scaffolding, curing, laying, fixing finishing etc., hire charges for tools
and plants, templates and other appliances, required for the purpose of
execution of the items work as per specification.

2 In case of non-availability of stone header of proper size cement

concrete header of mix 1:3 : 6 (M-100) with 25mm graded stone
aggregate with smooth finish may be provided by the contractor at no
extra cost.

Chapter
Description Unit
Code No
1 2 3

6.1 Random Rubble stone masonry for with hard stone in foundation and

plinth in Cement Sand mortar above 30 CM thick wall in:

6.1.1 Mud Mortar. Cum.
6.1.2 Dry Masonry. Cum.
6.1.3 Cement Mortar 1:3 ( 1-Cement : 3-Sand). Cum.
6.1.4 Cement Mortar 1:4 ( 1-Cement : 4-Sand). Cum.
6.1.5 Cement Mortar 1:5 ( 1-Cement : 5-Sand). Cum.
6.1.6 Cement Mortar 1:6 ( 1-Cement : 6-Sand). Cum.

6.2 Random Rubble stone masonry with hard stone in superstructure above

plinth level and upto five level above 30cm. thick walls in :
6.2.1 Mud Mortar. Cum.
6.2.2 Dry Masonry. Cum.
6.2.3 Cement Mortar 1:3 ( 1-Cement : 3-Sand). Cum.
6.2.4 Cement Mortar 1:4 ( 1-Cement : 4-Sand). Cum.
6.2.5 Cement Mortar 1:5 ( 1-Cement : 5-Sand). Cum.
6.2.6 Cement Mortar 1:6 ( 1-Cement : 6-Sand). Cum.

6.3 Add extra for Random Rubble stone masonry with hard stone in

6.3.1 Square or Rectangular pillars Cum.

6.3.2 Circular pillars Cum.
6.3.3 Wall curved in plan to mean radius not exceeding 6 Mtr. Cum
6.3.4 Wall upto 30cm. and less thickness. Cum

BSR_B6 [141]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

6.4 Add extra for facing as per design and detailed specifications including
additional cost of stones
6.4.1 Course rubble facing First sort. Sqm

6.4.2 Course rubble facing Second sort. Sqm

6.4.3 Ashlar fine tooled facing. Sqm

6.4.4 Ashlar rough tooled facing. Sqm.

6.4.5 Ashlar pitched facing. Sqm.

6.4.6 Add extra for rock facing using Jodhpur white sand stone with porper Sqm.
projection and chiesel dressing of edges of stone 2 line dressing for
building corners,jambs including uniform joints.

6.5 Extra for stone masory work,above floor V level for every four floors or Cum
part thereof.

6.6 Extra for laying stone work in or under water and/or liquid mud Cum/
including cost of pumping or bailing out water and removing slush etc. P Mt depth
complete.

6.7 Extra for laying stone work in or under foul position. Cum

Note :- Recover cost of useful stone @ 2/3rd of masonry work dismantaled Cum
quantity.

6.8 Stone work (machine cut edges) for Wall cladding/ Veneering work up
to 10m height with 20 to 30 mm thick Red Sand Stone (Karauli ) and
backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement :
3 coarse sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment matching the stone
shade :(To be secured to the backing by means of cramps which shall be
paid separately)
6.8.1 Exposed face rough dressed Sqm.

BSR_B6 [142]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.8.2 Exposed face machine cut Sqm.

6.9 Stone work (machine cut edges) for Wall cladding/ Veneering work up
to 10 m height with 20 to 30 mm thick Pink Sand stone (Bansi
Paharpur) and backing filled with a grout of 12mm thick cement mortar
1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar
1:2 (1 white cement : 2 stone dust) with an admixture of pigment
matching the stone shade : (To be secured to the backing by means of
cramps which shall be paid separately)
6.9.1 Exposed face rough dressed Sqm.
6.9.2 Exposed face Machine cut Sqm.

6.10 Wall lining butch work upto 10m height with Red/ Pink Sand stone 20
to 30 mm thick (machine cut edges) stone strips of minimum length
300 mm and required width including embedding every tenth layer and
bottom most layer in masonry or concrte after making necessary chases
of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12
mm thick bed of cement mortar 1 : 3 (1 cement : 3 Coarse sand) i/c ruled
pointing in cement mortar 1 :2 ( 1 white cement : 2 stone dust) with an
admixture of pigment to match the shade of stone complete as per
direction of Engineer in Charge.
6.10.1 Exposed face rough dressed Sqm.
6.10.2 Exposed face machine cut Sqm.

6.11 Providing and fixing stainless steel cramps of required size and shape Kg
for anchoring stone wall lining to the backing or securing adjacent
stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse
sand) including making the necessary chases in stone and holes in walls
wherever required.

6.12 Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge Each
shape as per design in cement mortar 1:2 (1 cement : 2 coarse sand)
including making the necessary chases.

BSR_B6 [143]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.13 Providing and fixing copper pins 7.5 cm long 6 mm diameter for Each
securing adjacent stones in stone wall lining in cement mortar 1:2 (1
cement : 2 coarse sand) including making the necessary chases.

6.14 Extra for stone work for wall lining on exterior walls of height more Sqm.
than 10 m from ground level for every additional height of 3 m or part
there of.

6.15 Providing and fixing horizontal chajja of Red/ White sand stone 40 mm Sqm.
thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4
coarse sand) including pointing in white cement mortar 1:2 (1 white
cement : 2 stone dust) with an admixture of pigment matching the stone
shade.

6.16 Providing dab stone over Chajjas duly fixed in cement sand mortar 1:6
complete :
6.16.1 80mm thick. Sqm.
6.16.2 50mm thick. Sqm.

6.17 Supplying and fixing in walls machine cut and polished stone shelves,
tands and in CM 1:3 with machine cut edges :
6.17.1 Sand or other approved stone 25mm thick. Sqm.
6.17.2 Sand or other approved stone 50mm thick. Sqm.
6.17.3 Kota stone minimum 30mm thick. Sqm.

6.18 Supplying and fixing stone lintels/bed plates of approved quarry rough
dressed in cement mortar 1:4 :
6.18.1 Upto 15 cm. thick. Cum
6.18.2 Above 15 cm. thick. Cum

6.19 Supplying and fixing machine cut fine dressed Red/Pink sand stone
dasa or coping, with full moulding if required laid on cement mortar
1:4 including pointing with admixture of pigment matching with the
stone shade.

6.19.1 25 mm thick Sqm.

6.19.2 50 mm thick Sqm.
6.19.3 75 mm thick Sqm.

BSR_B6 [144]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.20 Supplying and fixing machine cut dressed 75 mm Pink sand stone Sqm.
(Bansi Paharpur) dasa/ coping wth ornamental shape having moulding
and "PAN Shape" engraving as per required pattern with engraving
depth of 5 mm (average) in single piece of length 90 cm to be laid on
cement mortar 1:4 (12 to 20mm thick) including pointing with
admixture of pigment matching with the stone shade.

6.21 Providing and fixing Stone jali 40mm thick Red/Pink sand stone Sqm.
throughout in cement mortar 1:3 (1 cement : 3 coarse sand) including
pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment, matching the stone shade, jali patterns to be
cut square to jali slab without any chamfers etc:

6.22 Providing and fixing Stone jali 50mm thick Red/Pink sand stone as per Sqm.
ornamental design to fixed with white cement/epoxy mortar including
pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with
an admixture of pigment, matching the stone shade.

6.23 Providing and fixing Red/Pink sand stone post (Mataga) having size Each
100x100mm heights 600 to 750 mm as per ornamental design such as
like flower octonogal head border etc. to fixed with white cement/epoxy
mortar including pointing in white cement mortar 1:2 (1 white cement :
2 stone dust) with an admixture of pigment, matching the stone shade.

6.24 Providing and fixing ornamental/aesthetic look cement concerte Sqm

claddings/ veneers up to 100 mm with, over a base of cement Plaster
1:4, 20 mm thick including cement pointing 1:2 with an admixture of
pigment to match the shades of veneer upto 4:5 mtr. Height above plinth
level.

ARCH MASONRY
6.25 Stone masonary for arches in cement sand mortar 1:3 including
centering shuttering and pointing etc. up to 4.5 Mtr. height from plinth
level:
6.25.1 With hammer dressed stone (to be plastered). Cum

6.25.2 With coursed rubble stone (to be pointed). Cum

BSR_B6 [145]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

6.25.3 Block-in-Course chisel dressed, arch span up to 1.5 Mtr. Cum

6.25.4 Block-in-Course chisel dressed, arch span above 1.5 Mtr. Cum

6.25.5 Cut stone fine dressed with fine joints, arch span up to 1.5 Mtr. Cum

6.25.6 Cut stone fine dressed with fine joints, arch span above 1.5 Mtr. Cum

6.25.7 Relieving arch stone masonary. Cum

6.25.8 Extra over item No. 6.25 for dome masonary. Shuttering and Form Cum
work if required to be paid separately.

ASHLAR-STONE WORK
6.26 Supplying and fixing ashlar sills, jambs, skirting, steps etc. rough
dressed:
6.26.1 (A) Upto 15 cm thick Soorsagar or eqvt. White Ashlar Cum
(B) Upto 15 cm thick Red Ashlar Cum

6.26.2 Above 15 cm. and upto 20 cm. thick

(A) Red Ashlar Cum
(B) Soorsagar or eqvt. White Ashlar Cum

6.26.3 Above 20 cm. thick & upto 2.15 m length (Pats.)

(A) Red Ashlar Cum
(B) Soorsagar or eqvt. White Ashlar Cum

6.26.4 Above 20 cm. thick & above 2.15 m. length

(A) Red Ashlar Cum
(B) Soorsagar or eqvt. White Ashlar Cum

6.27 Supplying and fixing Soorsagar Bhura or Equivalent ashlar sills, lintels
and dassa, bearing, bed & top surface made perfenctly even, jambs,
skirting steps etc. rough dressed:
6.27.1 Upto 15 cm. thick Cum
6.27.2 Above 15 cm. and upto 20 cm. thick Cum
6.27.3 Above 20 cm. thick (pats) & upto 2.15 m length Cum
6.27.4 Above 20 cm. thick (pats) & above 2.15 m length Cum

BSR_B6 [146]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.28 Supply and fixing ashlar lintels and Dassa exposed horizontal and
vertical faces 3 - lines fine dressed (bearing bed & top surface made
perfectly even)
6.28.1 (a) upto 15 cm thick Red Ashlar Cum
(b) upto 15 cm thick White Ashlar Cum

6.28.2 Above 15 cm. and upto 20 cm. thick

(a) Soorsagar or eqvt. White Ashlar Cum
(b) Red Ashlar Cum

6.28.3 Above 20 cm. thick & upto 2.15 m length (Pats.)

(a) Soorsagar or eqvt. White Ashlar Cum
(b) Red Ashlar Cum

6.28.4 Above 20 cm. thick & above 2.15 m length

(a) Soorsagar or eqvt. White Ashlar Cum
(b) Red Ashlar Cum

6.29 Supplying and fixing ashlar solid block pillars fully fine (3 lines)
dressed
(a) Soorsagar or eqvt. White Ashlar Cum
(b) Red Stone Cum

6.30 Supplying and fixing ashlar stone arches fuly fine (3 lines) dressed for
1.5 to 5m. Span (Net content payable)
(a) Soorsagar or eqvt. White Ashlar Cum
(b) Red Stone Ashlar Cum

6.31 Supplying and fixing ashlar face stone 10 cm thick fine (3 lines) dressed

(b) Red Ashlar Sqm

6.32 Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line

dressed (normal length of single piece not less than 0.90m)

(a) Soorsagar or eqvt. White Ashlar Sqm
(b) Red Ashlar Sqm

6.33 Supplying and fixing ashlar coping moulded and counter slopped 7 to 10
cm. thick (2 line dressed) (normal length of single piece not less than
0.90m)
(a) Soorsagar or eqvt. White Ashlar Sqm
(b) Red Ashlar Sqm

BSR_B6 [147]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

6.34 Supplying and fixing in cement sand mortar 1:4 sand or other approved P. Cum
stone dassa or coping of thickness 75 to 100 mm (fine dressed) : Plain
ornamental/Jhalar coping (face area measured)

6.35 Supplying and fixing ashlar shrivan (Kharpa grooved) rough dressed Cum
(normal length of single piece not less than 0.90m)

6.36 Fine dressing of ashlar stone work (payable on Executive Engineer's test
checking):
6.36.1 (A) White Ashlar three line Sqm
(B) Red Ashlar three line Sqm

6.36.2 (A) White Ashlar two line Sqm

(B) Red Ashlar two line Sqm

6.36.3 (A) White Ashlar one line Sqm

(B) Red Ashlar one line Sqm

6.37 Rough dressing ashlar stone work (payable only for departmental work).

(A) Soorsagar or eqvt. White Ashlar Sqm

(B) Red Ashlar Sqm

6.38 Supplying and fixing ashlar cantilever steps fine (3 lines) dressed
(triangular exposed surface is to be measured)
(A) Soorsagar or eqvt. White Ashlar Cum
(B) Red Ashlar Cum

6.39 Supplying and fixing ashlar cantilever steps fine (2 lines) dressed
(triangular exposed surface is to be measured)
(A) Soorsagar or eqvt. White Ashlar Cum
(B) Red Ashlar Cum

6.40 Deduct if the shape of cantilever and landing steps is rectangular

6.40.1 Form item No. 6.37

(A) Soorsagar or eqvt. White Ashlar Cum
(B) Red Ashlar Cum

6.40.2 Form item No. 6.38

BSR_B6 [148]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(A) Soorsagar or eqvt. White Ashlar Cum
(B) Red Ashlar Cum

6.41 Supplying and fixing ashlar rain water spouts fine (3 lines) dressed as
per approved design of size :
6.41.1 (A) Red Ashlar 60x26x18 cm Each
(B) White Ashlar 60x26x18 cm Each

6.41.2 (A) White Ashlar 60x30x25 cm Each

(B) Red Ashlar 60x30x25 cm Each

6.42 Supplying and fixing ashlar stone chhajja 5 to 7 cm. thick all exposed
surface fully fine dressed, weather dripped includin 75x75mm. Cement
batta (1:2:4) between chhajja & wall (single piece upto 1:2m length) :
6.42.1 (A) Red Ashlar three line dressed Sqm
(B) White Ashlar three line dressed Sqm
6.42.2 (A) Red Ashlar two line dressed Sqm
(B) White Ashlar two line dressed Sqm

6.42.3 (A) Red Ashlar one line dressed Sqm

(B) White Ashlar one line dressed Sqm

6.43 Supplying and fixing Red ashlar railing ordinary with takia and thambli
complete fine dressed
6.43.1 Red Ashlar three line dressed Sqm
6.43.2 Red Ashlar two line dressed Sqm
6.43.3 Red Ashlar one line dressed Sqm

6.44 Supplying and fixing Red ashlar stone Jali 5 to 7 cm. thick curved

6.44.1 Red Ashlar upto half depth Sqm

6.44.2 Red Ashlar upto full depth Sqm

6.45 Re-fixing old ashlar stone w/o dressing

(A) White Ashlar Cum
(B) Red Ashlar Cum

6.46 Re-fixing of old stone slab

(A) White Ashlar Sqm
(B) Red Ashlar Sqm

BSR_B6 [149]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.47 Supply & fixing Red Ashlar shelves 5 to 7 cm. thick exposed surface Sqm
rough dressed

6.48 Supply and fixing Red Ashlar shelves 5 to 7 cm. thick exposed surface Sqm
fine (3 lines) dressed

6.49 Red ashlar todies for verandah (pillar and pat) fine (3 lines dressed) Sqm

6.50 Supply and fixing Red Ashlar todies for chhajjas and shelves fine (3 Sqm
lines) dressed 30x30x10cm.

6.51 Supply and fixing chittar or equivalent stone slab perchits with making

edges and top surface level in cement mortar 1:3 complete finished
6.51.1 Upto 2.15m span
Soorsagar or eqvt. White Ashlar Sqm

6.51.2 Add extra for span more than 2.15m span

Soorsagar or eqvt. White Ashlar Sqm

6.52 Supply and fixing 7 to 10 cm. Soorsagar or equivalent stone chaps in Sqm

lime mortar or gypsum rough dressed more than 0.60 m. length

6.53 Supply and fixing 2.5 to 5 cm thick Darba Darbi wall of red (Ros) stone Sqm
rough dressed fixed in lime mortar or gypsum

6.54 Supply and fixing soorsagar or equivalent white stone slab steps 75 to Sqm
100 mm thick fine (3 lines) dressed for tread & riser upto 2m. Length,
simply supported or centrally fixed with both ends free (projection to be
paid only)

6.55 Deduct if soorsagar or equivalent Bhura Ashlar stone is used in place of Sqm
white ashlar.
Ornamental work (as per existing pattern of Umed Hospital, M.G.
Hospital or Rajasthan High Court Building at Jodhpur)

6.56 Supplying and fixing soorsagar or equivalent 35 cm. height ashlar face Mtr.
(3 line) fine dressin with 3.5 cm. gola/groove complete including cutting
and moulding (excluding supply of Ashlar and fixing).

BSR_B6 [150]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.57 Supplying and fixing 13 cm thick soorsagar face stone over vent lintel Mtr.

complete including cutting & moulding (3 line fine dressed).

6.58 Supplying and fixing 7 to 8 cm thick soorsagar stone chajja in slope (3 Sqm
lines fine dressed)including cutting & moulding weather dripped (both
sides dressed)

6.59 Supplying and fixing 7 to 8 cm thick soorsagar stone chajja outer and
inner corner complete 3 lines fine dressed including cutting & moulding
weather dripped (both sides dressed).

(A) For white Ashlar stone outer corner Each

(B) For white Ashlar stone Inner corner Each

6.60 Supplying and fixing 17 cm thick soorsagar dab stone (face 3 line Mtr.
dressed) including cutting and moulding

6.61 Supplying and fixing Flat rain water spouts 25 Cm. Wide in Soorsagar Each

stone clopped chhajja including cutting & moulding.

6.62 Supplying and fixing red Ashlar 17 cm thick ventsill with required slope Mtr.

(face & sill 3 line dressed) complete including cutting and moulding

6.63 Supplying and fixing red Ashlar 17 cm thick exposed width todies under Mtr.
slopped Chajja with alternate projection and cutting complete including
cutting & moulding.

6.64 Supplying and fixing red Ashlar 17 cm thick exposed width todies under Each
slopped Chajja F.F. type design 22x22 cm projection (all 0.60 x 0.95 x
0.25 m)

6.65 Supplying and fixing 22 cm. Thick red Ashlar bed (pillar cap) 45 cm Each
wide X 135 cm long (3 line dressed) all exposed side complete including
cutting, moulding and chamffering etc.

BSR_B6 [151]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.66 Supplying and fixing white soorsagar stone coping 13 Cm thick & 45 Sqm

cm wide with 3 set back groove & one projection with sloped tope edge

including cutting, moulding and chamffering etc.

6.67 Labour charges for Animar dressing (old M.G.H. pattern) over Sqm
Soorsagar or equivalent white Ashlar over already two line dressed
surface by using special tools i.e. toothed chisel etc.

6.68 Labour charges for soorsagar or equivalent white Ashlar stone cornice Mtr.
of approved shape and design 18 cm. thick 38 to 40 cm. wide and
Animar dressing of M.G.H. pattern (including cutting and moulding).

6.69 Labour charges for providing 8 to 10 cm. Gola with animar dressing as Mtr.
per old M.G.H. pattern on white Ashlar

6.70 Labour charges for soorsagar or equivalent white Ashlar stone coping 15 Mtr.

Cm. thick with cutting, moulding and dressing as per old M.G.H. pattern

6.71 Labour charges for fixing of stone chhajja and making good the same
(exposed surface to be measured.
(A) Red Ashlar Sqm
(B) White Ashlar Sqm

6.72 Supplying and fixing stone liri in CM 1:4 work facing with proper
projection and chiesel dressing of edges of stone two line dressing of
building corners, jambs etc. including uniform joints using aluminium
square section of size 12 mm to 15 mm as per requirement of course and
width of stone not less than 12 Cm., with requisite number headers
(minimum length of stone 0.9 M) 6 cm. to 9 Cm. thick.
(i) 6 cm. to 9 Cm. thick including finsing face joint with white cement Per Sqm.
moartar and matching pigment.
(ii) Add extra for 7 to 10 cm. thick courses. Sqm
(iii) 14 cm (5.5") thick including finising face joint with white cement Per Sqm.
moartar and matching pigment.

BSR_B6 [152]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.73 Stone masonary 7 to 15 Cm. thick cladding in cement sand mortr 1:6 Mtr.
with C.R. First Sort facing and rock facing complete on R.C.C. or C.C.
works up to 15 to 20 cm. height.

6.74 Add extra for two line horizontal edges (Patti) dressing of course Mtr.
Khandas

6.75 Providing and fixing of machine cut Soorsagar white stone pavement Sqm
size 600x600 mm and 50 to 75 mm thick over 20 mm thick base cement
sand mortar 1:6 be placed at 50-60 mm interval as per existing pavement
design. (used single piece 60 cm x 60 cm.)

6.76 S&F 50 to 75 mm thick fine dressed and machine grained surface white Sqm
Soorsgar stone partition in cement mortar 1:6 with joint finish flush
pointing with white cement sand mortar 1:3 with colour pigment of
approved shade as per existing shop & as per direction of Engineer-in-
charge.

6.77 S&F white ashlar stone machine cut Kangura as per approved design 5 Mtr.
cm to 7 cm thick and top portion half round up to 10-12 cm height. Both
machine cut finished including excavation of earth work and fixing in
cement sand mortar 1:6 as per direction of Engineer incharge complete
in all respect size 35 cm wide 5/7 cm thick with all taxes.

6.78 P&F white ashlar Todies of machine cut for chhajja of porch fixing in Each

cement mortar of gypsum etc. complete in all respect size 30x30x10 cm.

6.79 P&F white ashlar Todies of machine cut for corners of porch fixing in Each

cement mortar or gypsum etc. complete in all respect size 45x30x10 cm.

6.80 Supply & fixing or equivelent white ashlar stone archess fully fine fine Each
(3 line) dressed 0.90 M (3' span)

6.81 Supply & fixing or equivelent white ashlar stone archess fully fine fine Each
(3 line) dressed 1.20 M (4' span) finished.

BSR_B6 [153]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.82 Supply & fixing or equivelent white ashlar stone archess fully fine fine Each
(3 line) dressed 1.50 M (5' span) finished.

6.83 Supply & fixing or equivelent white ashlar stone archess fully fine fine Each
(3 line) dressed 1.80 M (6' span) finished.

6.84 Supply & fixing or equivelent white ashlar stone archess fully fine fine Each
(3 line) dressed 2.10 M (7' span) finished.

6.85 Providing & Installation of White ashlar stone Carved perforated Jali 50 Rm
to 70mm thick with height 600mm and length not exceeding 1250mm
with pillar 900mm long with groove cutting etc. complete as per
direction of Engineer-in-charge (excluding cost of providing & fixing
dassa).

6.86 Supplying and fixing stone liri in CM 1:4 work facing with proper Sqm
projection and chiesel dressing of edges of stone two line dressing of
building corners, jambs etc. including uniform joints using aluminium
square section of size 12 mm to 15 mm as per requirement of course and
width of stone not less than 12 Cm., with requisite humber headers
(minimum length of stone 0.9 M) 14 cm (5.5")thick.

6.87 Supplying and fixing Jodhpur machine cut stone Kadau in CM 1:4 with Sqm.
rock facing with proper projection and machine cut edges of stone, two
line dressing of building corners, jambs etc. including uniform joints
using aluminium square section of size 12 mm to 15 mm as per
requirement of course and width of stone not less than 12 Cm., with
reqisite humber headers (minimum length of sotne 0.9 M)
(i) 29cm (11.5")hight Per Sqm.
(ii) 19cm (7.5")hight Per Sqm.

6.88 Supply and fixing Jodhpur sand stone Machine cut Dash,
Coping,sill,lintel fixed in cement sand mortar 1:4.
(i) 15 cm (6") thick Per Sqm.
(ii) 9 cm (3.5") thick Per Sqm.
(iii) 5 cm (2") thick Per Sqm.
(iv) 3.5 cm (1.5") thick Per Sqm.

BSR_B6 [154]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
6.89 Supply and fixing Jodhpur sand stone Machine cut Kerb stone (10cm Rm.
wide 40 cm. height) fixed in white cement sand mortar 1:4 with
pigment including EarthWork.

6.90 Supply and fixing Jodhpur sand stone Machine cut Nali fixed in white
cement sand mortar 1:4 with pigment including E/W
(A) Single nali 55 cm wide 40 cm hight Rm.
(B) Double nali 85 cm wide 40 cm hight Rm.

6.91 Add extra for facing with white ashlar stone three line dressed of size Sqm
300x300mm with min. thickness of 125mm, including all four edge are
chamfered cut 12mm x 12mm with 3 line dressing, every fifth stone
header with thickness min.300 mm,including additional cost of stone as
per drawing or as approved by Engineer In Charge, Complete with all
respect .

6.92 Fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:4 ( 1cement : 4 coarse sand) with joints finished flush. Red
Sand stone size not less than 1350 Cm2,
a) 40mm Sqm
b) 50mm Sqm
c) 75mm Sqm

6.93 Fine dressed stone flooring over 20 mm (average) thick base of cement
mortar 1:4 ( 1cement : 4 coarse sand) with joints finished flush. White
Sand stone size not less than 1350 Cm2,
a) 40mm Sqm
b) 50mm Sqm
c) 75mm Sqm

6.94 Chiesel dressing of machine cut Jodhpur ashlar stone. Sqm

BSR_B6 [155]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER B-6
ONE MASONRY

Rate (Rs.)
4

1850.00
1744.00
3528.00
3182.00
2998.00
2838.00

2490.00
2385.00
4169.00
3824.00
3639.00
3479.00

173.00
519.00
319.00
186.00

BSR_B6 [156]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

618.00

491.00

666.00

381.00

336.00

290.00

545.00

307.00

124.00

575.00

1814.00

BSR_B6 [157]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2500.00

1851.00
2536.00

1353.00
1455.00

707.00

26.00

BSR_B6 [158]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
26.00

64.00

883.00

921.00
825.00

504.00
673.00
609.00

9621.00
9162.00

1243.00
1458.00
1664.00

BSR_B6 [159]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
5309.00

7851.00

8813.00

800.00

982.00

8114.00

9060.00

BSR_B6 [160]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

11963.00

12528.00

14819.00

13815.00

6000.00

1966.00

25952.00
17161.00

17291.00
26082.00

17421.00
26245.00

17454.00
26245.00

5019.00
5149.00
5312.00
5507.00

BSR_B6 [161]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

18369.00
26722.00

26992.00
18579.00

27062.00
18649.00

27272.00
18859.00

38844.00
27662.00

34203.00
23112.00

5006.00

8348.00
4741.00

9028.00
5421.00

BSR_B6 [162]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

11004.00

16279.00

1952.00
929.00

1215.00
739.00

988.00
441.00

226.00
154.00

100886.00
93386.00

98886.00
91386.00

50443.00
46693.00

BSR_B6 [163]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
49443.00
45693.00

571.00
1135.00

1457.00
744.00

1247.00
1707.00
1057.00
970.00

759.00
743.00

1296.00
1106.00
808.00

1839.00
2313.00

427.00
340.00

126.00
108.00

BSR_B6 [164]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
284.00

778.00

1449.00

855.00

674.00

55.00

344.00

430.00

3439.00

421.00

732.00

BSR_B6 [165]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1435.00

3994.00

1686.00
840.00

1832.00

1660.00

2656.00

2689.00

2521.00

5047.00

BSR_B6 [166]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
4832.00

848.00

1111.00

496.00

966.00

263.00
266.00

1981.00

324.00
2167.00

BSR_B6 [167]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
179.00

59.00

2092.00

2178.00

796.00

1050.00

1224.00

9724.00

11756.00

BSR_B6 [168]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
13434.00

15112.00

17855.00

8077.00

2081.00

3259.00
2880.00

2923.00
2081.00
2167.00
1984.00

BSR_B6 [169]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
857.00

3421.00
4312.00

4350.00

1244.00
1392.00
1685.00

1392.00
1538.00
1831.00

517.00
1517299.00

BSR_B6 [170]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B - 7
MARBLE, GRANITE AND TILE WORKS
Chapter
Description Unit
Code No
1 2 3

7.1 Providing and fixing Marble stone flooring table rubbed, 15-18 mm

thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand)

jointing with white cement mortar 1:2 (1 white cement : 2 marble dust)

with pigment to match the shade of the marble slab including grinding,

rubbing and polishing complete.

OR
Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls,
Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.)
thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white
cement mortar 1:2 (1white cement : 2 marble dust) with pigment to
match the shade of the marble slab including grinding, rubbing and
polishing complete.

7.1 Makrana 'Adanga'.

7.1.1 Upto to 1500 Cm2 Tiles Sqm.
7.1.2 1501 Cm2 to 3600 Cm2 Tiles Sqm.
7.1.3 Above 3601 Cm2 Slabs Sqm.

7.2 Rajnagar 1st quality/Ageria with light spots.

7.2.1 Up to 1500 Cm2 Tiles Sqm.
7.2.2 1501 Cm2 to 3600 Cm2 Tiles Sqm.
7.2.3 Above 3601 Cm2 Slabs Sqm.

7.3 Keseriaji/ Abu Ambaji (Green Marble)

7.3.1 Up to 1500 Cm2 Tiles Sqm.
7.3.2 1501 Cm2 to 3600 Cm2 Tiles Sqm.
7.3.3 Above 3601 Cm2 Slabs Sqm.

7.4 Bhaislana,Abu,Kishangarh Zebra (Black Marble)

7.4.1 up to 1500 Cm2 Tiles Sqm.
7.4.2 1501 Cm2 to 3600 Cm2 Tiles Sqm.

Marble_B7 [171]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
7.4.3 Above 3601 Cm2 Slabs Sqm.

7.5 Providing and fixing Granite stone slab mirror polished and machine
edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid
on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse
sand) jointing with white cement mortar 1:2 (1white cement : 2 marble
dust) with pigment to match the shade of the marble slab including
grinding, rubbing and polishing complete.

7.5.1 Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)

(i) Up to 1500 Cm2 Tiles Sqm.
(ii) 1501 Cm2 to 3600 Cm2 Tiles Sqm.
(iii) Above 3601 Cm Slabs
2
Sqm.

7.5.2 South (Red)

(i) Up to 1500 Cm2 Tiles Sqm.
(ii) 1501 Cm to 3600 Cm Tiles
2 2
Sqm.
(iii) Above 3601 Cm2 Slabs Sqm.

7.5.3 South Zed Black

(i) Up to 1500 Cm2 Tiles Sqm.
(ii) 1501 Cm to 3600 Cm Tiles
2 2
Sqm.
(iii) Above 3601 Cm2 Slabs Sqm.

7.5.4 Good quality South Black

(i) Up to 1500 Cm2 Tiles Sqm.
(ii) 1501 Cm to 3600 Cm Tiles
2 2
Sqm.
(iii) Above 3601 Cm2 Slabs Sqm.

7.5.5 Jalore (P-white / S-white/ Rosy Pink colour)

(i) Up to 1500 Cm2 Tiles Sqm.
(ii) 1501 Cm to 3600 Cm Tiles
2 2
Sqm.
(iii) Above 3601 Cm2 Slabs Sqm.

7.5.6 Rajasthan Black

(i) Up to 1500 Cm2 Tiles Sqm.

Marble_B7 [172]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(ii) 1501 Cm to 3600 Cm Tiles
2 2
Sqm.
(iii) Above 3601 Cm2 Slabs Sqm.

7.6 Extra for providing edge moulding to 15-18mm thick marble/

Granite/Kota stone counters, Vanities etc. including machine polishing
to edge to give high gloss finish etc. complete as per design approved by
Engineer-in-Charge.
7.6.1 Marble work
(i) Full Edge moulding Mtr.

(ii) Half Edge moulding Mtr.

7.6.2 Granite/Kota Stone Work

(i) Full Edge moulding Mtr.

(ii) Half Edge moulding Mtr.

7.7 Extra for fixing marble /granite stone over and above corresponding Mtr.

basic item, in facia and drops of width upto 150 mm with epoxy resin

based adhesive including cleaning etc. complete

7.8 Extra for providing opening of required size & shape for wash basins/ Each
Opening
kitchen sink in kitchen platform, vanity counters and similar location in
marble/Granite/stone work including necessary holes for pillar taps
etc. including rubbing and polishing of cut edges etc. complete

7.9 Extra for Mirror polishing on marble work where ever required to give Sqm.
high gloss finish complete.

7.10 Extra in marble/other flooring work for upto 50 mm wide strip of Rm

Green/White/ Jaisalmer stone in flooring work as per direction of
Engineer in Charge

Marble_B7 [173]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
7.11 Providing and fixing cramps of required size & shape in RCC/ CC

backing with cement mortar 1:2 ( 1 cement :2 coarse sand) including

drilling necessary hole in stones and embedding the cramp in the hole .
7.11.1 Gun Metal cramp Kg

7.11.2 Stainless steel cramps Kg

7.12 Providing and fixing 1st quality standard white, grey, ivory, fume red Sqm.
brown, light green, light blue and other light shades glazed tiles
confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls,
floors, steps, pillars etc. laid on a bed of neat cement slurry finished with
flush pointing in the white cement mixed with pigment to match the
shade of the tile complete (excluding the cost of cement plaster on walls
and pillar).

7.13 Providing and fixing 1st quality MAT finished ceremic tile size Sqm.
300x300mm confirming to IS : 13755 and IS : 15622 colour such as
white, grey, ivory, fume red brown, light green, light blue and other light
shades in floors, steps, pillars etc. laid on a bed of neat cement slurry
finished with flush pointing in the white cement mixed with pigment to
match the shade of the tile complete (including the cost of cement
mortar bed 1:4).

7.14 Extra for using Marble printed / Granite shade or dark shade tiles Sqm
instead of white, grey, ivory, fume red brown, light green, light
blue and other light shades in glazed tiles and MAT finished tiles.

7.15 Extra for using size above 200x300mm in glazed tiles and for using Sqm

400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.

7.16 Providing and fixing 75 mm wide Decorative Border in different Rmt.

shades and in all coloures in glazed tiles laid over 12 mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3 kg per sqm including pointing in white mixed with
pigment of matching shade complete.

Marble_B7 [174]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

7.17 Providing and fixing Motive pieces all colours for glazed tiles laid
over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)
and jointing with grey cement slurry @ 3.3 kg per sqm including
pointing in white mixed with pigment of matching shade complete..
7.17.1 Size 200 x 200mm Each
7.17.2 Size 200 x 300mm Each
7.17.3 Size 300 x 300mm Each
7.17.4 Size 300 x 450mm Each
7.17.5 Size 300 x 600mm Each

7.18 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and
steps etc.in different sizes (thickness to be specified by manufactuer)
with water absortion less than 0.08% and conforming to IS 15622 of
approved make in all colour and shade, laid with 20 mm thick CM 1 : 4
including grounting the joints with white cement and matching pigment
etc complete.
7.18.1 size 450 mm X 450 mm Sqm
7.18.2 size 600 mm X 600 mm Sqm
7.18.3 size 800mm X 800 mm Sqm

7.19 Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement Sqm
based high polymer modified quick-set tile adhesive (Water based)
conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in
average 3mm thickness instead of cement mortar.

7.20 Providing and fixing 1st quality standard white, grey, ivory, fume red
brown, light green, light blue and other light shades ceramic glazed
vitrified tiles with water absortion less than or equal to 0.08%
confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed
of neat cement slurry finished with flush pointing in the white cement
mixed with pigment to match the shade of the tile complete (excluding
the cost of cement plaster on walls and pillar).
7.20.1 Size 600mm x 1200mm Sqm
7.20.2 Size 800mm x 1200mm Sqm
7.20.3 Size 196mm x 1215mm Sqm

Marble_B7 [175]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
7.21 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile
confirming to IS : 13755 and IS : 15622 colour such as white, grey,
ivory, fume red brown, light green, light blue and other light shades in
floors, steps, pillars etc. laid on a bed of neat cement slurry finished with
flush pointing in the white cement mixed with pigment to match the
shade of the tile complete (including the cost of cement mortar bed 1:4).
7.21.1 Size 250mm x 375mm Sqm
7.21.2 Size 300mm x 450mm Sqm
7.21.3 Size 300mm x 600mm Sqm
7.21.4 Size 250mm x 1000mm Sqm
7.21.5 Size 600mm x 600mm Sqm

7.22 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor,
skirting and steps etc.in different sizes (thickness minimum 10mm) with
water absortion less than or equal 0.08% and conforming to IS 15622 of
approved make in all colour and shade, laid with 20 mm thick CM 1: 4
including grounting the joints with white cement and matching pigment
etc complete.
7.22.1 Size 298mm x 298mm Sqm
7.22.2 Size 300mm x 450mm Sqm
7.22.3 Size 600mm x 600mm Sqm
7.22.4 size 600 mm X 1200 mm Sqm

7.23 Providing non slip grooves to granite/ kota stone flooring, counters, Mtr.
vanities etc. using groove cutter V type including machine polishing to
groove to give high gloss finish etc. complete as per design approved by
engineer in charge

7.24 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor,
skirting and steps etc.in different sizes (thickness minimum 10mm) with
water absortion less than or equal 0.08% and conforming to IS 15622 of
approved make in all colour and shade, laid with 20 mm thick CM 1: 4
including grounting the joints with white cement and matching pigment
etc complete.

Marble_B7 [176]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
7.24.1 size 600 mm X 600 mm Sqm
7.24.2 size 600 mm X 1200mm Sqm

7.25 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor,
skirting and steps etc.in different sizes (thickness minimum 10mm) with
water absortion less than or equal 0.08% and conforming to IS 15622 of
approved make in all colour and shade, laid with 20 mm thick CM 1: 4
including grounting the joints with white cement and matching pigment
etc complete.
7.25.1 size 600 mm X 600mm Sqm
7.25.2 size 800 mm X 800mm Sqm
7.25.3 size 1000 mm X 1000mm Sqm
7.25.4 size 600 mm X 1200mm Sqm

7.26 Providing and fixing 1st quality standard Marble printed/ Granite Shade Sqm.
or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of
size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of
neat cement slurry finished with flush pointing in the white cement
mixed with pigment to match the shade of the tile complete (excluding
the cost of cement plaster on walls and pillar).

Marble_B7 [177]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B - 7
ANITE AND TILE WORKS
Rate (Rs.)
4

1164.00
1350.00
1674.00

1044.00
1157.00
1305.00

1084.00
1268.00
1674.00

1029.00
1120.00

Marble_B7 [178]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1361.00

1993.00
2818.00
3028.00

2453.00
2944.00
3434.00

2334.00
3176.00
4076.00

2310.00
2952.00
3850.00

1850.00
2400.00
2750.00

2000.00

Marble_B7 [179]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2600.00
3100.00

146.00

88.00

233.00

143.00

24.00

256.00

102.00

52.00

Marble_B7 [180]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

642.00

611.00

674.00

748.00

10%

10%

329.00

Marble_B7 [181]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

130.00
155.00
219.00
250.00
281.00

789.00
911.00
1100.00

128.00

1463.00
1825.00
1824.00

Marble_B7 [182]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

727.00
809.00
894.00
1079.00
1162.00

705.00
870.00
1126.00
1415.00

105.00

Marble_B7 [183]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1183.00
1645.00

1041.00
1296.00
1464.00
1425.00

1003.00

96370.20

Marble_B7 [184]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-8
WOOD WORK
Chapter
Description Unit
Code No
1 2 3
8.1 Providing & fixing door, window, chowkhats and other frames,

including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x

3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in

cement concrete M-15 grade :

8.1.1 Sal wood Grade - I. Cum
8.1.2 Kiln seasoned and chemically treated Hollock wood. Grade I Cum

8.1.3 Sheesham wood Grade - I. Cum

8.1.4 Nigeria teak wood Grade - I. Cum
8.1.5 Ghana teak wood Grade - I. Cum
8.1.6 Ivory coast wood Grade I Cum

8.2 Supplying and fixing wood work in frames of wall panelling, false
ceiling partition wall etc. as per approved design and drawing including
antitermite treatment.
8.2.1 Hollock wood Grade - I. Cum
8.2.2 Chir wood Grade - I. Cum

8.3 Add extra in frames for circular members such as in fan lights, staircase Cum
railing etc.

8.4 Providing and fixing fully panelled/partly panelled/ double leaf shutter
frames for doors as per approved design and drawings with approved
ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of
styles & top rails of 100mm and lock rails width of 150mm and bottom
rails of 200mm width including teak wood beading of size 19mm x
12mm on both faces complete :
8.4.1 35 mm thick
8.4.1.1 Nigeria wood grade I Sqm
8.4.1.2 Ghana wood grade I Sqm
8.4.1.3 Shesham wood grade I Sqm
8.4.1.4 Ivory coast wood grade I Sqm

8.4.2 30 mm thick
8.4.2.1 Nigeria wood grade I Sqm
8.4.2.2 Ghana wood grade I Sqm
8.4.2.3 Shesham wood grade I Sqm

BSR_B8 [185]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.4.2.4 Ivory coast wood grade I Sqm

8.5 Providing and fixing fully panelled /partly panelled double leaf shutters
frame for windows and ventilators as per approved design and drawings
with approved steel fittings as per Annexure ‘A’ and width of styles,
bottom and top rails 75mm including intermediate rails 50mm wide,
beading of 25mm x 15mm size on both faces :
8.5.1 35 mm thick
8.5.1.1 Nigeria wood grade I Sqm
8.5.1.2 Ghana wood grade I Sqm
8.5.1.3 Shesham wood grade I Sqm
8.5.1.4 Ivory coast wood grade I Sqm

8.5.2 30 mm thick
8.5.2.1 Nigeria wood grade I Sqm
8.5.2.2 Ghana wood grade I Sqm
8.5.2.3 Shesham wood grade I Sqm
8.5.2.4 Ivory coast wood grade I Sqm

8.5.3 25 mm thick
8.5.3.1 Nigeria wood grade I Sqm
8.5.3.2 Ghana wood grade I Sqm
8.5.3.3 Shesham wood grade I Sqm
8.5.3.4 Ivory coast wood grade I Sqm

8.6 Providing and fixing wood panelling or panelling and glazing in

panelled or panelled and glazed shutters for doors, windows and
clerestory windows (Area of opening for panel inserts excluding portion
inside grooves or rebates to be measured). Panelling for panelled and
glazed shutter 25 mm to 40 mm thick

8.6.1 Wood panel grade I

8.6.1.1 Nigeria wood Grade I Sqm
8.6.1.2 Ghana wood grade I Sqm
8.6.1.3 Shesham wood grade I Sqm
8.6.1.4 Ivory coast wood grade I Sqm

8.6.2 IS 710- 1976 marked 9 mm thick commerical ply Sqm

8.6.3 IS 710- 1976 marked 9 mm thick Teak ply BWR one side Sqm

BSR_B8 [186]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.6.4 IS 710- 1976 marked 9 mm thick Teak BWR ply both side Sqm

8.6.5 IS 710- 1976 marked 12 mm thick commerical ply Sqm

8.6.5A IS 710- 1976 marked 19 mm thick commerical ply Sqm

8.6.6 IS 710- 1976 marked 12 mm thick Teak ply BWR one side Sqm

8.6.7 IS 710- 1976 marked 12mm thick Teak ply BWR both side Sqm

8.6.8 Wire gauge 24 gauge 14 mesh of IS 1568-1970 marked 85 gauge of dia Sqm
0.56 mm

8.6.9 SS wire gauge 14 mesh x 24 gauge Sqm

8.6.10 4 mm plain float glass Sqm

8.6.11 5 mm float glass Sqm

8.6.12 8 mm thick glass Sqm

8.6.13 6 mm thick glass Sqm

8.6.14 10 mm thick glass Sqm

8.6.15 12 mm thick glass Sqm

8.6.16 5 mm tinted glass Sqm

8.6.17 5 mm reflected glass Sqm

8.7 (a) Extra for providing frosted glass panes instead of ordinary float glass Sqm
panes in doors, windows and clerestory window shutters. (Area of
opening for glass panes excluding portion inside rebate shall be
measured).

8.7 (b) Extra for providing toughened glass panes instead of ordinary float glass Per mm Per
panes in doors, windows and clerestory window shutters. (Area of Sqm
opening for glass panes excluding portion inside rebate shall be
measured).

BSR_B8 [187]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.8 Deduct for providing pin headed glass panes instead of ordinary float Sqm
glass panes weighing 4 mm thick in doors, windows and clerestory
windows, shutters (Area of opening for glass panes excluding portion
inside rebate shall be measured).

8.9 Extra for providing IS 1341-1992 marked Stainless Steel butt hinges Sqm
instead of black enamelled M.S. butt hinges with necessary screws.
(Shutter area to be measured).

8.10 Extra for providing movable/ fixed Nigeria / Ghana /Ivory Teak wood Sqm
grade - I louvers instead of wooden panels in column No.4 for Nigeria /
Ghana/Ivory Teak wood door shutters.

8.11 Deduct for providing Single leaf shutter instead of double leaf. Sqm

8.12 Add extra for etching work in glass work as per direction of engineer Sqm
incharge (Area of opening for glass panes excluding portion inside
rebate shall be measured)

8.13 Providing and fixing external grade board solid core single leaf flush
door shutters ISI 2202-67 marked using Phenol formal dehyderesin in
glue both sides with approved steel fittings complete as per annexure 'A'
:
8.13.1 25 mm thick .
8.13.1.1 Commercial Veneer both side Sqm
8.13.1.2 Decorative teak veneer One side Sqm
8.13.1.3 Decorative teak veneer both side Sqm

8.13.2 30 mm thick .
8.13.2.1 Commercial Veneer both side Sqm
8.13.2.2 Decorative teak veneer One side Sqm
8.13.2.3 Decorative teak veneer both side Sqm

8.13.3 35 mm thick .
8.13.3.1 Commercial Veneer both side Sqm
8.13.3.2 Decorative teak veneer One side Sqm
8.13.3.3 Decorative teak veneer both side Sqm

BSR_B8 [188]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.14 Extra for providing external lipping with 2nd class teak wood battens 6 mm Sqm
minimum depth on all edges of shutters (over all area of door shutter to be
measured) Over item no. 8.13.

8.15 Extra for providing vision panel not exceeding 0.1 Sqm in all type of Each
flush doors (cost of glass excluded) (overall area of door shutter to be
measured) :

8.16 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters Sqm.
(overall area of door shutters to be measured). .

8.17 Extra for cutting rebate in flush door shutters for making double leaf Sqm.

shutter(Total area of the shutter to be measured).

8.18 Extra for providing other type of fittings as mention in annexure A ( as

approved by EI) :
8.18.1 Brass fittings Sqm.
8.18.2 Stainless steel fittings Sqm.

8.19 Providing and fixing Hollow core partition wall using 50x30 mm Chir
wood frame 600 mm c/c on both directions,door opening as per drawing
with steel fittings antitermite treatment complete as per specifications
using :
8.19.1 ISI 4 mm thick commercial ply with 0.80 mm mica with adhesive on Sqm
both sides.
8.19.2 ISI 4 mm teak ply one side BWR Sqm

8.20 Providing and fixing wall panelling using soft wood frame of size
50x25mm @600 mm c/c in both directions duly treated with anti-termite
treatment making grooves painting of grooves specification and drawing
using :
8.20.1 ISI 6 mm teak ply one side BWR Sqm
8.20.2 ISI 9 mm teak ply one side BWR Sqm
8.20.3 12mm thick Acoustical Board Sqm
8.20.4 12 mm thick one side laminated board Practical board (Phenol bonded) Sqm

8.21.1 Providing and fixing 50 mm thick resin bounded glass wool 32 kg/cum Sqm
density wrapped in julities cloth bag (box type) and held in position
using chicken mesh

BSR_B8 [189]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.21.2 Providing and fixing Hassian cloth of approved colour and texture over Sqm

soft wood frame glass wool & fibre glass tissue paper

8.22 Providing and fixing expandable fastners of specified size with

necessary plastic sleeves and galvanised M.S. screws including drilling
holes in masonry work /CC/R.C.C. and making good etc. complete
8.22.1 25 mm long Each
8.22.2 32 mm long Each
8.22.3 40 mm long Each
8.22.4 50 mm long Each

8.23 Providing and fixing Nigeria / Ghana /Ivory Coast Teak wood

grade-I mouldings and beadings in doors and windows size :-

8.23.1 50x12 mm Mtr
8.23.2 50x20 mm Mtr
8.23.3 25x12 mm Mtr
8.23.4 25x20 mm Mtr

8.24 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed Mtr
3 layer or graded wood particle board medium density grade I, IS : 3087
marked including top cover of 6 mm commercial ply wood conforming
to IS: 303 BWR grade, nickel plate MS 20 mm dia curtain rod with
nickel plated bracket including fixing with 25x3 mm MS flat 10 cm
long all complete

8.25 Providing and fixing curtain rods of 1.25 mm thick chromium plated

brass plate, with two chromium plated brass brackets fixed with C.P.

brass screws and wooden plugs, etc., wherever necessary complete:

8.25.1 12 mm Mtr..
8.25.2 20 mm Mtr..

8.26 Providing and fixing IS : 3564 marked Aluminium die cast body tubular Each
type universal hydraulic door closer with necessary accessories and
screws etc. complete.

BSR_B8 [190]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.27 Providing and fixing IS : 3564 marked aluminium extruded section body Each

tubular type universal hydraulic door closer with double speed

adjustment with necessary accessories and screws etc. complete.

8.28 Providing and fixing Bamboo jaffery/ fencing consisting of superior Sqm
quality 25mm dia (Average) half cut bamboo placed vertically and fixed
together with three numbers horizontal running members of wood in
scantling of section 50X25mm fixed with nails and GI wire to existing
surface complete as per direction of EI

8.29 Providing and Fixing Bamboo Zafari/Fencing consisting of superior Sqm

quality 25mm dia Solid Bamboo placed vertically & fixed together with

3 Nos Horizontal running members of wood in scantling of section size

50x40mm and fixed with nut and bolt to existing surface/angle post as

per direction given by Engineer-in-charge

8.30 Providing and fixing wooden moulded corner beading of triangular Rm

shape to the junction of panelling etc. with iron screws, plugs and
priming coat on unexposed surface etc. complete 2nd class teak wood.
50x50mm (base and height)

8.31 Providing and fixing bright finished Mortice lock of approved make Each
Godrej or equivalent with pair of CP handles for doors with necessary
screws etc complete (Best make of approved quality) as per direction of
Engineer-in-charge.

8.32 Extra for providing Brass handle instead of CP handle Each

8.33 Providing and fixing Almirah lock (50 to 70 mm size )of approved make Each
without pair of handles for door with necessary screws etc complete as per
direction of Engineer-in-charge.

BSR_B8 [191]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.34 Providing & Fixing of ward robe shutters made out of 19mm thick BWP

block board ISI of superior quality make with following details :-

Front side finishing with 1mm thick superior quality mica approved Sqm
make and 0.8mm thick approved shade mica in the inner side. Covering
with teak wood beading 25x12mm all the sides of shutter & 35x12mm
on outer frame for making good the wall joint including heavy brass S.S.
fittings (Handle 200mm 2 Nos., Tower Bolt 150mm 2 Nos., Brass Lock
1 Nos., Magnetic Catcher 2 Nos., Brass Hinges 75x40x2.5 mm 6 Nos.,
SS Hanger Rod 20mm dia) complete as per drawing and design
approved by Engineer in Charge.

8.35 Providing & Fixing mica of approved make for inner/outer side of
shutters with fevicol & nails complete as per approved by engineer in
charge.

8.35.1 0.6mm thick mica Sqm

8.35.2 0.8mm thick mica Sqm

8.36 Providing & Fixing decorative veneer of approved make for inner/outer
side of shutters with fevicol & nails complete as per approved by
engineer in charge.

8.36.1 4.0mm thick veneer Sqm

8.36.2 6.0mm thick veneer Sqm

8.37 Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) including Rmt
brackets fixed with C.P. brass screws and rawl plugs, etc., wherever
necessary complete two side central all fittings.

8.38 Providing & Fixing BWR ISI marked 19 mm board of approved make Sqm
for making wardrobe/shelves and other furniture with fevicol & nails
complete as per approved by engineer in charge.

BSR_B8 [192]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
8.39 Providing & Fixing Commercial Ply as per IS 710 : 1976 BWR of
approved make for making wardrobe/shelves and other furniture with
fevicol & nails complete as per approved by engineer in charge.

(i) 18 mm thick Sqm

(ii) 12 mm thick Sqm
(iii) 6 mm thick Sqm

8.40 Providing & Fixing telescopic channel of approved make for drawers
with screws complete as per approved by engineer in charge.

(i) 300mm long Each

(ii) 400mm long Each
(iii) 450mm long. Each
(iv) 500mm long Each
(v) 600mm long Each

8.41 Providing & Fixing drawer handle of approved make for drawers with
screws complete as per approved by engineer in charge.

(i) 100mm long Each

(ii) 150mm long Each

8.42 Providing & Fixing drawer lock of approved make for drawers with screws Each
complete as per approved by engineer in charge.

BSR_B8 [193]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-8
WOOD WORK
Rate (Rs.)
4

48847.00
41491.00

101671.00
110138.00
118554.00
135533.00

46270.00
43387.00

10%

2778.00
2968.00
2584.00
3345.00

2465.00
2628.00
2284.00

BSR_B8 [194]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2957.00

2488.00
2650.00
2312.00
2976.00

2208.00
2347.00
2045.00
2627.00

1929.00
2039.00
1779.00
2277.00

2244.00
2398.00
2079.00
2708.00

906.00

1568.00

BSR_B8 [195]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1821.00

1081.00

1243.00

1821.00

2074.00

695.00

927.00

839.00

1020.00

1445.00

1694.00

2357.00

2755.00

1628.00

1827.00

306.00

50.00

BSR_B8 [196]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
96.00

127.00

10 %

20 %

20%

1686.00
1894.00
2376.00

1841.00
2033.00
2440.00

1991.00
2248.00
2505.00

BSR_B8 [197]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
141.00

128.00

308.00

89.00

20 %
10%

2044.00

1928.00

1484.00
1786.00
1426.00
1748.00

560.00

BSR_B8 [198]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
312.00

13.00
17.00
18.00
19.00

89.00
127.00
72.00
88.00

341.00

231.00
266.00

908.00

BSR_B8 [199]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1478.00

413.00

941.00

182.00

629.00

10%

150.00

BSR_B8 [200]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5571.00

627.00
762.00

1434.00
1569.00

650.00

1350.00

BSR_B8 [201]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1350.00
1031.00
850.00

426.00
513.00
563.00
628.00
751.00

159.00
195.00

448.00

787113.40

BSR_B8 [202]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-9
STEEL & FENCING WORKS
Chapter
Description Unit
Code No
1 2 3

9.1 Structural steel work in single section fixed with or without connecting Kg.

plate including cutting, hoisting ( height upto 10 m), fixing in position

and applying a priming coat of approved steel primer all complete.

9.1.1 Add Extra if I/rail section is used Kg.

9.2 Structural steel work riveted, bolted or welded in built up sections, Kg.
trusses and framed work, including cutting, hoisting (height upto 10 m)
, fixing in position and applying a priming coat of approved steel primer
all complete:

9.3 Steel work in built up tubular trusses including cutting, hoisting

( height upto 10 m)fixing in position and applying a priming coat of
approved steel primer, welded and bolted including special shaped
washers etc. complete.

9.3.1 Hot finished welded type tubes. Kg.

9.3.2 Hot finished seamless type tubes. Kg

9.3.3 Electric resistance or induction butt welded tubes. Kg.

9.4 Extra for hoisting and fixing for every additional one metre or part Kg.
thereof beyond 10 mtr height.

BSR_B9 [203]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
9.5 Providing and fixing T-iron frames for doors, windows and ventilators Kg.
of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs
10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6
(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size) or with wooden plugs and screws or rawl plugs and screws or with
fixing clips or with bolts and nuts as require including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer.

9.6 Providing and fixing pressed steel door frames confirming to IS 4351
manufactured from commercial mild steel sheet of 1.25 mm thickness
including hinges jamb, lock jamb, bead and if required angle threshold
of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed
mild steel welded or rigidly fixed together by mechanical means,
adjustable lugs with split end tail to each jamb including steel butt
hinges 2.5mm thick with mortar guards, lock strike-plate and shock
absorbers as specified and applying a coat of approved steel primer
after pre-treatment of the surface including filling with CC 1:2:4(M15
grade) complete as directed by Engineer-in-charge :

9.6.1 Profile B Mtr.

9.6.2 Profile C Mtr.
9.6.3 Profile E Mtr.

9.7 Supply and fixing in cement mortar welded hand railing made out of MS Kg.
round or square bars, flats etc. for staircase or verandah as per design
complete in all respect (wooden or PVC hand railing to be paid extra)
with priming coat of red oxide.
9.7.1 Extra for providing D type pipe head as top of hand railing Kg.

9.8 Providing and fixing steel gate, grating , and grills made of angles, tees, Kg.
square bars, flats,or black pipe with holdfast and fittings complete as per
design and drawing including cutting welding and fabrication with
priming coat of red oxide
9.8.1 Extra if square,rectangular hollow tubelar sections are used or grill Kg.
made by flats only

BSR_B9 [204]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
9.9 Providing and fixing cow catcher made of R.S. joist angles channels MS Kg.
rounds including cutting welding and fabrication with priming coat of
red oxide (as per design).

9.10 Providing and fixing in position collapsible steel shutters with vertical Sqm.
M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x
5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with
40mm dia steel pulleys/ball bearing complete with bolts, nuts locking
arrangements inside and outside stoppers, handles etc. as per
specification including applying a priming coat of approved steel
primer. (To be measured and paid as per outer dimension).

9.11 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame Sqm
& diagonals braces of 40 x 40 x 6mm. angle iron 3mm M.S. gusset
plates at the junction and corners, 25mm dia pulley 40x40x6mm angle
and T-iron guide at the top and bottom respectively including applying a
priming coat of approved steel primer.

9.12 Providing and fixing 1mm thick M.S. sheet garrage door shutters with
frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the
junction and corners including all fittings and applying a coat of
approved steel primer : (Excluding cost of frames)
9.12.1 Using M.S. angles 40 x 40 x 6mm for diagonal braces. Sqm.
9.12.2 Using flats 30 x 6mm for diagonal braces and central cross piece. Sqm.

9.13 Supplying and fixing rolling shutters of approved make, made of 80 x Sqm.
1.25mm. M.S. laths interlocked together through their entire length and
jointed together at the end by end locks mounted on specially designed
pipe shaft with brackets, side guides and arrangements for inside and
outside locking with push and pull operation complete including cost of
spring hooks, providing and fixing necessary 25.3cm. long wire springs
grade No. 2 and M.S. top cover 1.25mm thick for rolling shutters as per
design & IS 6248- 1979. (Clear openable area to be measured for
payment).

9.14 Providing & fixing ball bearing for rolling shutters Each

BSR_B9 [205]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

9.15 Extra for providing mechanical device chain and crank operation for
operating rolling shutters.
9.15.1 Exceeding 10.00 Sqm and upto 16.80 Sqm in the area. Sqm.
9.15.2 Exceeding 16.80 Sqm in the area. Sqm.

9.16 Extra for providing grilled rolling shutters manufactured out of 8 mm Sqm.
dia. M.S. bar instead of laths as per design approved by Engineer-in-
charge. (area of grill to be measured).

9.17 Providing and fixing M.S. sheet 1mm thick single leaf door shutter in Sqm.
angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm
flat iron above and below lock rail of size 50x5mm beading extra
including all fittings, as per direction of Engg. incharge but excluding
cost of chowkhats: including two coats of anit-corrosive red oxide
primer paint

9.17.1 Add extra for double leaf shutters. Sqm.

9.18 Fixing standard steel glazed doors, windows and ventilators in walls Sqm.
with 15x3mm lugs 10cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 (1 cement: 3 coarse sand: 6 graded stone
aggregate 20 mm nominal size) or with wooden plugs and screws or
rawl plugs and screws or with fixing clips or with bolts and nuts as
required, including fixing of glass panes with glazing clips and special
metal-sash putty of approved make, or metal beading with screws (only
steel windows with lugs, glass pane cut to size and glazing clips or metal
beading with screws, shall be supplied by department free of cost.)

BSR_B9 [206]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
9.19 Providing and fixing steel glazed doors windows and ventilator shutters
of standard rolled steel section (IS 1038-1983) joints mitred and welded
with steel lugs 13x3mm, 10cm. long embedded in cement concrete
block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone
aggregate 20mm nominal size) or with wooden plugs and screws or rawl
plugs and screws with fixing clips or with bolts and nuts as required
including providing and fixing of plain glass panes 4mm thick with
cooper glazing clips and special metal sash putty of approved make or
metal beading with screws complete including priming coat of approval
steel primer, excluding the cost of metal beading and other fitting except
necessary hinges of pivots steel handles peg stay etc. as required :
9.19.1 Doors Sqm.
9.19.2 Windows fixed Sqm.
9.19.3 Windows side hung /Ventilators top or centre hung (openable) Sqm.

9.19.4 Partly fixed and partly openable [ fixed area not to exceed 33%] Sqm.

9.20 Providing brass handles/peg stays and fittings in place of oxidized fitting Sqm.

9.21 Aluminium handles/peg stays fitting instead of oxidized fitting. Sqm.

9.22 5mm thick plain glass instead of 4mm thick plain glass Sqm.

9.23 Deduct for Not providing glass panels Sqm.

9.24 Deduct for Pin headed 4mm thick glass panels is used instead of 4mm Sqm.
thick plain glass

9.25 Deduct for Not provided oxidised fittings. Sqm.

9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the Sqm.
metal frame of rolled section by metal beading 20x3mm with suitable
screw at not exceeding 150mm distance.

9.27 Providing and fixing Square bars or other flat welded to window, Kg.
ventilatiors etc.

BSR_B9 [207]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

9.28 Providing and fixing steel glazed window frame made out of 80x40 mm
hollow sheet section of 16 gauge thickness, joint mitred welded and
grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long
embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and
including fixing of pivoted hinges of superior quality, window shutters
made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18
gauge thickness, joint mitred and grinded including 10mm x 10mm
square bars welded to frame for paitam fixing float glass 4mm thick
panes with glazing clips and metal sash putty and fixing of shutters
frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long
of steel powder coated superior quality including fixing and jointing
with frame hinges priming coat with steel primer complete in all respect
as per direction of Engineer-in –charge
9.28.1 Window openable. Sqm
9.28.2 Window fixed. Sqm
9.28.3 Extra for additional shutter in pipe section windows with wire gauge 14 Sqm
mesh x 24 gauge

FENCING WORK
9.29 180cm high fencing with angle iron post 55x55x6mm. placed at every Mtr.

3Mtr. apart 45cm. in ground embedded in cement concrete 1:3:6

(30x30x60cm) corner and every tenth post to be strutted with

55x55x6mm. angle iron provided with 6 horizontal lines and two

diagonals of black barbed wire between two posts fitted and fixed with

G.I. staples including earth work in excavation etc. complete.

9.30 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to Mtr.
10x10cm at top placed at every 3m apart 30cm in ground embedded in
cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be
strutted with same R.C. posts provided with 6 horizontal lines and two
diagonals of black barbed wire between the two posts fitted and fixed
with G.I. staples including earth work in excavation etc. complete

BSR_B9 [208]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
9.31 150cm high fencing with angle iron 50x50x6mm. placed at every 3Mtr. Mtr.
apart 30cm. in ground embedded in cement concrete 1:3:6
(30x30x45cm) corner and every tenth post to be strutted with
50x50x6mm. angle iron provided with 5 horizontal lines and two
diagonals of black barbed wire between two posts fitted and fixed with
G.I. staples including earth work in excavation etc. complete.

9.32 120cm. high fencing with angle iron posts 50x50x6mm. placed at every Mtr.
3 Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6
(30x30x45cm) corner & every tenth posts to be strutted with
50x50x6mm angle iron provided with four horizontal lines and two
diagonals of black barbed wire between two posts fitted and fixed with
G.I. staple including earth work in excavation etc. complete.

9.33 Add or deduct for each wire line over basic item Mtr.

9.34 Add or deduct for additional or less higher per 10 Cm. over basic item Mtr

9.35 Extra for using galvanized barbed wire instead of black barbed wire. Mtr. Each
wire

9.35.1 Add Extra if barbed wire fencing is done on wall upto height of 3.00 Mtr.
Mtr.

9.36 Supplying and fixing of chain link fencing with angle iron posts
50x50x6mm placed at every 3 Mtr. apart 30cm in ground embedded in
cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be
strutted with (50 x 50 x 6cm) angle iron provided and fixed and fitted
with posts including earth work in excavation etc. complete with chain
link size.
9.36.1 50mm x 50mm x 3.15mm Sqm.
9.36.2 75mm x 15mm x 3.15mm Sqm.

9.36.3 100mm x 100mm x 3.15mm Sqm.

9.36.4 150mm x 150mm x 3.15mm Sqm.

BSR_B9 [209]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
9.37 Providing and fixing concertina coil fencing with required dia 610 mm Mtr.
(having 15 nos. round per 6 metre length) up to 3m height of wall with
existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9
horizontal R.B.T. stud tied with GI staples and GI clips to retain
horizontal including necessary bolts or GI barbed wire tied to angle iron
all complete as per direction of Engineer In Charge with reinforced
barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile
strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478
gm/metre (Cost of MS angle, CC block shall be paid extra)

9.38 Providing and fixing welded mesh/expanded metal mesh in frame work,
flat iron beading 20x3mm including top cross laps inside and out sides
welding, iron bolts, crews, clips etc. complete (excluding frame work) of
size.
9.38.1 Welded mesh 50 mmx 50 mm x 2.1 mm Sqm.
9.38.2 Welded mesh 50 mmx 25 mm x 2.1 mm Sqm.
9.38.3 Welded mesh 25 mmx 25 mm x 2.1 mm Sqm.
9.38.4 Expended metal size 20-25 mm size 18SWG Sqm.

9.39 Providing and fixing of double leaf steel shutter for cupboard, the frame Sqm
is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with
1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS
oxidized fittings such as butt hinges, sliding doors bolts, handles, tower
bolts and twin peg etc complete including applying priming coat of
approved steel primer of red oxide zinc chromate and spray painting in
approved shade with deco paint of approved quality complete as per
direction of Engineer In Charge

BSR_B9 [210]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-9
& FENCING WORKS
Rate (Rs.)
4

72.00

10%

81.00

100.00

109.00

131.00

6.00

BSR_B9 [211]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
83.00

429.00
469.00
506.00

81.00

10%

96.00

10%

BSR_B9 [212]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
74.00

5174.00

3579.00

3141.00
2993.00

2074.00

516.00

BSR_B9 [213]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

823.00
887.00

327.00

2869.00

20%

278.00

BSR_B9 [214]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

3099.00
3090.00
3135.00

3090.00

5%

3%

95.00

311.00

5%

5%

617.00

65.00

BSR_B9 [215]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

3803.00
3501.00
1654.00

586.00

503.00

BSR_B9 [216]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
512.00

470.00

12.00

5%

5%

5%

629.00
565.00

521.00
480.00

BSR_B9 [217]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
266.00

693.00
722.00
750.00
779.00

3895.00

58741.73

BSR_B9 [218]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-10
ROOFING
Note :
1 Rates are for complete item of work and are inclusive of all centering,
shuttering, curing and finishing including all leads and delivery of
material at site of work with all lead and lift.
2 The rates for G.I. sheet roofing are inclusive of all necessary, overlaps
and wastage in cutting and all standard screws nuts washers bolts and
nuts ‘J’ or ‘L’ hooks etc. required as per specifications.
3 All precautions shall be taken to ensure that the finished roof is water
tight and without any leakage under all weather conditions. Particular
care shall be taken in providing good workmanship specially at
vulnerable points.

Chapter
Description Unit
Code No
1 2 3

GALVANISED IRON SHEET ROOFING

10.1 Providing corrugated G.S. sheet roofing including vertical / curved

surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm
diameter with bitumen and G.I. limpet washers or with G.I. limpet
washers filled with white lead and including a coat of approved steel
primer and two coats of approved paint on overlapping of sheets
complete (upto any pitch in horizontal/ vertical or curved surfaces)
excluding the cost of purlins, rafters and trusses and including cutting to
size and shape whenever required.
10.1.1 1.00 mm thick with zinc coating not less than 275 gm/m 2 Sqm
10.1.2 0.80 mm thick with zinc coating not less than 275 gm/m 2
Sqm
10.1.3 0.63 mm thick with zinc coating not less than 275 gm/m 2 Sqm

10.2 Extra for straight cutting in C.G.S. sheet roofing for making opening of P.Mtr. Peri-
meter
area exceeding 40 sq. decimetre for chimney stacks, sky light etc. :

10.3 Extra for circular cutting in C.G.S. sheet roofing for making opening of P.Mtr. Peri-
area exceeding 40 square decimetre : meter

10.4 Providing ridges or hips of width 60 cm over all width plain G.S. sheet
fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I.
limpet and bitumen washers complete.

BSR_B10 [219]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.4.1 0.80mm thick with zinc coating not less than 275 Mtr.
10.4.2 0.63mm thick with zinc coating not less than 275 Mtr.

10.5 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with Mtr.
polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and
bitumen washers complete : 1.60mm thick with zinc coating not less
than 350gm/m²

10.6 Providing flashing of 40 cm over all width in plain, G.S. sheet fixed Mtr.
with polymer coated J, or L hooks, bolts and nuts, G.I. limpet and
bitumen washer complete, bent to shape and fixed in wall with cement
mortar 1:3 (1cement : 3 coarse sand)
1.00mm thick sheet

10.7 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S.
sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers
etc. including making necessary connections with rain water pipes
complete.
10.7.1 0.80mm thick Mtr.
10.7.2 0.63mm thick Mtr.

10.8 Providing non-asbestos high impact Polypropylene reinforced cement 6 Sqm

mm thick corrugated sheets (As per IS: 14871) roofing upto any pitch
and fixing with polymer coated J, or L hooks, bolts and nuts 8mm dia.
G.I. plain and bitumen washers or with self drilling fastener and EPDM
washers etc. complete excluding the cost of purlins, rafters and trusses
corrugated sheets and including cutting to size and shape wherever
required

10.9 Extra for straight cutting in non- asbestos polypropylene reinforced Mtr.
cement corrugated, semi-corrugated 6 mm thick sheet roofing for
making openings of area exceeding 40 square decimetre for chimney
stacks, skylights etc.

BSR_B10 [220]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.10 Extra for circular cutting in non-asbestos polypropylene reinforced Mtr.

cement corrugated/ semi-corrugated 6 mm thick sheet roofing for

making openings of area exceeding 40 square decimetre.

10.11 Extra for providing and fixing wind ties of 40x 6mm flat iron section. Mtr.

10.12 Providing and fixing ridges and hips in non-asbestos fibre cement high
impact polypropylene reinforced roofing with suitable fixing accessories
or self drilling fastener and EPDM washer etc. complete.

10.12.1 One piece corrugated serrated adjustable ridges Mtr.

10.12.2 Plain wing adjustable ridges Mtr.
10.12.3 Close fitting adjustable ridges Mtr.
10.12.4 Unserrated adjustable hips Mtr.

10.13 Providing and fixing non-asbestos fibre cement high impact

polypropylene reinforced roofing accessories in all colours with polymer
coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I.
plain and bitumen washers or with self drilling fastener and EPDM
washer etc. complete :
10.13.1 Corrugated appron pieces Mtr.
10.13.2 Eaves filler pieces Mtr.
10.13.3 North light curve Mtr.
10.13.4 Ventilator curve Mtr.
10.13.5 Barge boards Mtr.
10.13.6 Ridge final pair
10.13.7 Special north light ventilator curve Each
10.13.8 S type louvers Mtr.

10.14 Providing flat iron brackets 50x3mm size with necessary bolts, nuts and Mtr.

washers etc. for fixing asbestos cement/G.S. sheets gutters with purlins.

BSR_B10 [221]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.15 Painting top of roofs with bitumen of approved quality at 17kg per 10 Sqm

sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm

including cleaning the slab surface with brushes and finally with a piece

of cloth lightly soaked in kerosene oil complete: With residual type

petroleum bitumen of penetration 80/100

10.16 Stone slab roofing on ground floor with fine grained stone slab from Sqm
approved quarry including filling of joints of parapet and slab on both
sides in cement sand mortar 1:4, with ceiling pointing in cement sand
mortar 1 : 3 complete as per specification and instruction of Engineer In
Charge
10.16.1 Add extra for subsequent story Sqm

10.17 Grading roof for water proofing treatment with water proffing
compound
10.17.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone Cum
aggregate 20 mm nominal size)
10.17.2 Cement mortar 1:3 (1 cement : 3 coarse sand) Cum
10.17.3 Cement mortar 1:4 (1cement : 4 coarse sand) Cum

10.18 Providing and laying brick kharanja on roofs with cement mortar 1:4 (1
cement : 4 coarse sand) mixed with 2% integral water proofing
compound in square pattern
10.18.1 75mm to 100mm thick average Sqm
10.18.2 55mm to 60mm thick average Sqm

10.19 Providing and laying brick tiles of class designation 100 over roofs Sqm
grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2%
of integral water proofing compound by weight of cement, over a 12
mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand ) and finished
neat .

10.20 Providing and fixing 20 mm thick precast terrazo tiles of approved Sqm
make, with marble chips of size upto 6mm laid over roof with neat
cement slurry mixed with pigment to match the shade of the tiles,
including cutting ,grinding rubbing with machine complete on 20 mm
thick bed of cement sand mortar 1 : 4.

BSR_B10 [222]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

10.21 Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc consisting of following operations.
(a) Applying and grouting a slurry coat of neat cement using 2.75
kg/sqm. of cement admixed with proprietary water proofing compound
conforming to IS. 2645 over the RCC slab including cleaning the
surface before treatment.
(b) Laying cement concrete using broken bricks/brick bats 25 mm to
100mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand)
admixed with proprietary water proofing compound conforming to IS :
2645 over 20 mm thick layer of cement mortar of mix 1:4 (1 cement :4
coarse sand ) admixed with proprietary water proofing compound
conforming to IS : 2645 to required slope and treating similarly the
adjoining walls upto 300 mm height including rounding of junctions of
walls and slabs.

(c) After two days of proper curing applying a second coat of cement Sqm
slurry admixed with proprietary water proofing compound conforming
to IS : 2645.
(d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with proprietary water
proofing compound conforming to IS : 2645 and finally finishing the
surface with trowel with neat cement slurry and making of
300x300xmm square
(e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer-in-Charge.
With average thickness of 120mm and minimum thickness at khurra as
65 mm.

BSR_B10 [223]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.22 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse Mtr.

sand : 4 stone aggregate 10mm and down gauge) including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

10.23 Making khurras 450 x 450mm with average minimum thickness 50mm Each

cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron

finished with 12mm cement plaster 1 : 3 and one coat of neat cement,

rounding edges and making and finishing the out let complete.

10.24 Providing & laying broken glazed titles on roof ( broken glazed tiles not Sqm
less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of
VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and
joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with
water proofing compund all complete as per direction of Engineer-in-
charge.

10.25 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any
pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I
plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc.
The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating
minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi
and hot cured. They shall be of uniform pigmentation and thickness without air pockets
and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent,
clear or pigmented, textured or smooth as specified.
10.25.1 2.0mm thick (Wt. 3.3 Kg./Mtr. Sq.) Sqm
10.25.2 3.0mm thick (Wt. 5.0 Kg./Mtr. Sq.) Sqm
10.25.3 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) Sqm

10.26 Extra for corrugated Fiberglass Reinforced Plastic (FRP) (2.5" /4.2"/6") or step down Sqm
(2.5" /4.2"/6") as specified.

FALSE CEILING

BSR_B10 [224]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.27 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS Sqm
2095- Part I at all height false ceiling including providing and fixing of frame work
made of special sections power pressed from M.S. sheet and galvanised in accordance
with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size
25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to
centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with
6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end
of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running
at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom
wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm
centre to centre shall be fixed in a direction perpendicular to G.I. channel with
connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction
including fixing the gypsum board with ceiling section and perimeter channels 0.5mm
thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling
fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with
25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush
finish of tapered and square edges of the board with recommended filler, jointing tapes,
finisher and two coats of primer suitable for board as per manufactures specification
and also including the cost of making openings for light fittings, grills, diffusers,
cutouts made with frame of perimeter channels suitably fixed all complete as per
drawing and specification and direction of the Engineer in Charge but excluding the
cost of painting.

BSR_B10 [225]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.28 Providing and fixing 14 mm thick Acoustical with fine fissured tiles/ Mineral fibre Sqm
high density tiles with butt edges false ceiling tiles of size 595x595 mm in true
horizontal level suspended on inter locking metal grid of hot dipped galvanised steel
sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably
spaced joints to get required length and of size 24x38mm made from 0.30mm thick
(minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm
made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at
600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of
length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall
angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the
grid including, wherever, required, cutting/making, opening for services like diffusers,
grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended
from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long
dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm
center to center along main T, bottom exposed width of 24mm of all T-sections shall
be pre-painted with polyester paint, all complete at all heights as per specifications
drawings and as directed by Engineer-in-Charge. ( The tiles should of 90 % RH avg.
NCR 0.55 light reflectance> 80% thermal conductiveity K = 0.052-0.057 w/m K
colour white. Fire performance class 0/class I(BS 476) with warranty against sag)

10.29 Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False Sqm
ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking
metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.)
consisting of main “T” runner with suitably spaced joints to get required length and of
size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to
center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet,
1200mm long spaced between main “T” at 600mm center to center to form a grid of
1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of
0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel
to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false
ceiling tiles of approved texture in the grid including, wherever, required,
cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats
fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods
with galvanised level clips spaced at 1200mm center to center along main T, bottom
exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all
complete at all heights as per specifications drawings and as directed by Engineer-in-
Charge.

10.30 Providing and fixing calcium silicate board false ceiling at all heights
including providing and fixing of frame work made of special sections power
pressed from M.S. sheet and galvanised in accordance with zinc coating of
10.30.1 6 mm thick Sqm

BSR_B10 [226]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.30.2 8 mm thick Sqm

10.31 Providing & fixing calcium silicate ceiling tiles of size 595 x 595 mm in true
horizontal level suspended on inter locking metal grid of hot dipped
galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main
“T” runner with suitably spaced joints to get required length and of size
24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm
center to center and cross “T” of size 24x25mm made of 0.30mm thick
(minimum) sheet, 1200mm long spaced between main “T” at 600mm center to
center to form a grid of 1200x600 mm and secondary cross “T” of length
600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be
interlocked at middle of the 1200x600mm panel to form grids of 600x600mm
and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of
approved texture in the grid including, wherever, required, cutting/making,
opening for services like diffusers, grills, light fittings, fixtures, smoke
detectors etc. Main “T” runners to be suspended from ceiling using GI slotted
cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI
adjustable rods with galvanised level clips spaced at 1200mm center to center
along main T, bottom exposed width of 24mm of all T-sections shall be pre-
painted with polyester paint, all complete at all heights as per specifications
drawings and as directed by Engineer-in-Charge of thickness of tiles as
mentioned below:-

10.31.1 6 mm thick Sqm

10.31.2 8 mm thick Sqm

10.32 Providing and fixing calcium silicate perforated board false ceiling at all
heights including providing and fixing of frame work made of special
sections power pressed from M.S. sheet and galvanised in accordance
10.32.1 6 mm thick Sqm

10.32.2 8 mm thick Sqm

BSR_B10 [227]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

10.33 Providing & fixing calcium silicate perforated ceiling tiles of size 595 x
595 mm in true horizontal level suspended on inter locking metal grid of
hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.)
consisting of main “T” runner with suitably spaced joints to get required
length and of size 24x38mm made from 0.30mm thick (minimum) sheet
spaced at 1200mm center to center and cross “T” of size 24x25mm
made of 0.30mm thick (minimum) sheet, 1200mm long spaced between
main “T” at 600mm center to center to form a grid of 1200x600 mm and
secondary cross “T” of length 600mm and size 24x25mm made of 0.30
mm thick (minimum) sheet to be interlocked at middle of the
1200x600mm panel to form grids of 600x600mm and wall angle of size
21x21x0.30 mm and laying false ceiling tiles of approved texture in the
grid including, wherever, required, cutting/making, opening for services
like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main
“T” runners to be suspended from ceiling using GI slotted cleats fixed to
ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI
adjustable rods with galvanised level clips spaced at 1200mm center to
center along main T, bottom exposed width of 24mm of all T-sections
shall be pre-painted with polyester paint, all complete at all heights as
per specifications drawings and as directed by Engineer-in-Charge of
thickness of tiles as mentioned below:-
10.33.1 6 mm thick Sqm
10.33.2 8 mm thick Sqm

BSR_B10 [228]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.34 Providing and fixing 15 mm thick densified tegular edged eco friendly
light weight calcium silicate false ceiling tiles of approved texture as per
direction of Engineer-in-charge of size 595 X 595 mm in true horizontal
level suspended on inter locking metal grid of hot dipped galvanized
steel sections (galvanizing @120 grams per sqm) consisting of main ‘T’
runner suitably spaced at joints to get required length and size of
24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre
to centre, and cross ‘T’ of size 24X32mm made out of 0.33mm
(Minimum) sheet, 1200mm long spaced between main ‘T’ at 600mm
centre to centre to form a grid of 1200X600mm and secondary cross ’T’
of length 600mm and size 24X32mm made out of 0.33 mm thick
(Minimum) sheet to be interlocked at middle of the 1200X600mm panel
to form grid of size 600X600mm resting...

...on periphery walls/partitions on a perimeter wall angle pre-coated steel of Sqm

size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help
of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @
230mm interval and laying 15mm thick densified edged calcium silicate
ceiling tiles of approved texture in the grid including cutting /making opening
for services like diffusers, grills, light fitting, fixtures, smoke detectors etc.,
wherever required, Main ‘T’ runners to be suspended from ceiling using 50
mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvnised
steel L cleat level adjusters of size 80x25x2mm, spaced at 1200mm centre to
centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be
pre-painted with polyster baked paint, for all heights, as per specifications,
drawing and as directed by engineer-in-charge. Note :- Only calcium silicate
false ceiling area will be measured from wall to wall. No deduction shall be
made for exposed frames/opening (cut outs)having area less than 0.30 Sqm.
The calcium silicate ceiling tiles shall have NRC. Value 0.50 (Minimum),
light reflection> 85% non-combustible as per B.S. 476 part IV, 100%
humidity resistance and also having thermal conductivity <= 0.043 w/m0KC.

BSR_B10 [229]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.35 Providing and fixing tiled false ceiling of approved materials of size 595X595 mm
in true horizontal level suspended on inter locking metal grid of hot dipped
galvanized steel sections ( galvanized @ 120 grams per sqm both side inclusive )
consisting of main “T” runner with suitably spaced joints to get required length
and of size 24X38 mm made from 0.30 mm thick (minimum) sheet spaced at 1200
mm center to center and cross “T” of size 24X25 mm made of 0.30 mm thick
(minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to
center to form a grid of 1200X600 mm and secondary cross “T” of length 600 mm
and size 24X25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at
middle of the 1200X600 mm panel to form grids of 600X600 mm and wall angle
of size 24X24X0.3 mm and laying false ceiling tiles of approved texture in the
grid including, required cutting/ making, opening for services like diffusers, grills,
light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended
from ceiling using GI slotted cleats of size 27 X 37 X 25 X 1.6 mm fixed to
ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods
with galvanized butterfly level clips of size 85 X 30 X 0.8 mm spaced at 1200
mm center to center along main T, bottom exposed width of 24 mm of all T-
sections shall be pre-painted with polyester paint, all complete for all heights as
per specifications, drawings and as directed by Engineer-in-charge.

10.35.1 GI Metal Ceiling Lay in Plain Tegular edge Global white colour tiles of Sqm
size 595X595 mm, and 0.5 mm thick with 8 mm drop, made of G I
Sheet having galvanizing of 100 gms/sqm (boths ides inclusive) and
electro statically polyester powder coated of thickness 60 microns
(minimum), including factory painted after bending.

10.35.2 GI Metal Ceiling Lay in perforated Tegular edge global white colour Sqm
tiles of size 595x595mm and 0.5 mm thick with 8 mm drop made of GI
Sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and
20% perforation area with 1.8 mm dia holes and having NRC (Noise
Reduction Coefficient ) of 0.5, electro statically polyester powder coated
of thickness 60 microns (minimum), including factory painted after
bending and perforation and backed with a black Glass fiber acoustical
fleece.

BSR_B10 [230]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.35.3 12.5mm thick square edge PVC laminated Gypsum tiles of size 595mm Sqm
x 595mm, made of Gypsum plasterboard, manufactured from natural
gypsum as per IS 2095 part I and laminated with white 0.16mm thick
fire retardant PVC film on the face side and 12 micron metalized
polyester on the back side with all edges sealed with the face side PVC
film which goes around and wraps the edges and is bonded to the edged
and the back side metalized polyester film so as to make the tile a
completely sealed unit.

10.35.4 Providing Solid PVC false Ceiling consisting of 600mm x 600mm, 5mm Sqm
(±0.25) thick Plain embossed PVC sheet of Density 600 Kg /Cbm
Manufactured by an ISO-9001-2015 certified Company, used as panel
insert in a frame work made using powder coated aluminum T- section
of sizes 1” x1”( 25x25mm, 19 gauge or 1mm thick ) in square pattern
of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is
supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm
M.S. rods of required sizes to maintain proper level etc. The aluminum
framework is supported on side wall with the use of aluminum L-section
of size 1”x1” ( 25x25mm ) angles etc. Complete as per direction of
Engineer-In-charge, manufacturer’s specification & drawing.

10.36 Providing & Fixing of Mineral Fibre Anti Bacterial Suspended Ceiling Mtr
System with (Bevelled Tegular) EDGE TILES WITH 15 mm Exposed
GRID. The tiles should have Humidity Resistance (RH) of 95% Light
10.37 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling Mtr
System with (Bevelled Tegular) EDGE TILES WITH 15 mm Exposed
GRID. The tiles should have Humidity Resistance (RH) of 99% NRC

BSR_B10 [231]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.38 Providing and fixing 300C Aluminium Panel with perforation of 2mm Sqm
diameter and 5mm centre to centre to give 15% open area with Non woven
textile False Ceiling system of approved colour consisting of Panel 300 mm
wide X 30 mm deep X 0.7 mm thick with bevelled edges having panel length
upto 6 mtrs, Coil Coated on a Continuous Paint Line, Double baked and roll
formed for higher strength and good roll forming characteristics. The panel
ends will be raised upto 29mm. Panel shall be clipped to a baked enamelled
aluminium panel carrier of 41.5mm wide x 62mm deep x 0.95 mm thick in
standard length of 5 mtrs. made of double baked stove enamelled aluminium
magnesium alloy AA3005 black with cut outs to hold the panels. The Carrier
shall be suspended by means of G.I. threaded rod of 6-mm diameter directly
fixed to the Carrier. The Carrier tabs to be bent down to secure the panels at
all Panel Carrier intersections. The panels will be installed in a module of
300MM. (Tensile strength of suspension-344/413 mpa and fastner strength-
110kg) All Ceiling Panels shall adhere to GreenPro Certifications.

10.39 Providing and fixing of perforated Metal Tile Ceiling System comprising of Sqm
Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick
aluminium alloy 3105 with beveled edge of 4.15mm width height of 32mm.
The tiles shall be perforated to 1.5mm dia with open area of 23%. The Tile
will be manufactured on advanced includes several leveling stages in the
manufacturing process by approved manufacturers. Tile ends will be raised
with pips and slops to ensure positive engagement into the spring to enable
for de-mounting of individual panels. The Tile sides will be sufficiently high
to ensure a minimum deflection across the length of Tile. All Tiles will be
bevel edged. The Tile shall be epoxy polyester powder coating in white
colour. The Tile shall be cllpped into clip in rail of 0.5mm thick GI. in form
of a grid system using a cross connector. The clip in rail shall be supported
from slab by means of rigid Suspension of 4mm G .I rod, Hold on Clamp with
Clip. POWDER COATING SPECIFICATION: Aluminium PANELS, cleaned
through eco friendly cleaning ,process and powder applied through
electrostatic charged Automatic Carona technology spray guns and cured in
combination of Infrared & hot air oven in a certified plant as Akzo
International approved applicator .

BSR_B10 [232]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
The powder is conforming with the performance requirements of the
AAMA2603.02 & Qualicoat Claa 1 specifications.
The coating thickness will be minimum 60 microns with properties of
Salt Spray of 1500 hrs in exposure in SST Cabinet with Minimum
blister rating 8.
(Tensile strength of suspension-344/413 mpa and fastner strength-
110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.

10.40 Providing and fixing of Un-perforated Metal Tile Ceiling System Sqm
comprising of Tile of 600mm wide and 600mm long manufactured out
of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm
width height of 32mm. The Tile will be manufactured on advanced
equipment that includes several leveling stages in the manufacturing
process by approved manufacturers . Tile ends will be raised with pips
and slops to ensure positive engagement into the spring to enable for
de-mounting of individual panels. The Tile sides will be sufficiently
high to ensure a minimum deflection across the length of Tile. All Tiles
will be bevel edged. The Tile shall be epoxy polyester powder coating
with in white colour. The Tile shall be cllpped into clip in rail of
0.5mm thick GI. in form of a grid system using a cross connector. The
clip in rail shall be supported from slab by means of rigid Suspension
of 4mm G .I rod, Hold on Clamp with Clip. POWDER COATING
SPECIFICATION: Aluminium PANELS, cleaned through eco friendly
cleaning ,process and powder applied through electrostatic charged
Automatic Carona technology spray guns and cured in combination of
Infrared & hot air oven in a certified plant as Akzo International
approved applicator .

BSR_B10 [233]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
The powder is conforming with the performance requirements of the
AAMA2603.02 & Qualicoat Claa 1 specifications. The coating
thickness will be minimum 60 microns with properties of Salt Spray of
1500 hrs in exposure in SST Cabinet with Minimum blister rating 8.
(Tensile strength of suspension-344/413 mpa and fastner strength-
110kg) All Ceiling Panels shall adhere to GreenPro Certifications.

10.41 Providing and fixing of Un perforated Antibacterial Metal Tile Ceiling System Sqm
comprising of Tile of 600mm wide and 600mm long manufactured out of
0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width height
of 32mm. The Tile will be manufactured on advanced equipment that includes
several leveling stages in the manufacturing process by approved manufacturers.
Tile ends will be raised with pips and slops to ensure positive engagement into
the spring to enable for de-mounting of individual panels. The Tile sides will be
sufficiently high to ensure a minimum deflection across the length of Tile. All
Tiles will be bevel edged. The Tile shall be epoxy polyester powder coating with
ANTIBAC in white colour which is in compliant to ROHS directive. The Tile
shall be cllpped into clip in rail of 0.5mm thick GI. in form of a grid system
using a cross connector. The clip in rail shall be supported from slab by means of
rigid Suspension of 4mm G .I rod, Hold on Clamp with Clip. POWDER
COATING SPECIFICATION: Aluminium PANELS, cleaned through eco
friendly cleaning ,process and powder applied through electrostatic charged
Automatic Carona technology spray guns and cured in combination of Infrared &
hot air oven in a certified plant as Akzo International approved applicator .
The powder is conforming with the performance requirements of the
AAMA2603.02 & Qualicoat Claa 1 specifications.
The coating thickness will be minimum 60 microns with properties of Salt Spray
of 1500 hrs in exposure in SST Cabinet with Minimum blister rating 8.
(Tensile strength of suspension-344/413 mpa and fastner strength-110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.

BSR_B10 [234]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.42 Providing and fixing of Perforated Metal Tile Ceiling System comprising of Tile of Sqm
600mm wide and 600mm long manufactured out of 0.5mm thick Galvanised Iron
with beveled edge of 4.15mm width height of 32mm. The tiles shall be perforated to
1.5mm dia with open area of 23%. The Tile will be manufactured on advanced
equipment that includes several leveling stages in the manufacturing process by
approved manufacturers. Tile ends will be raised with pips and slops to ensure
positive engagement into the spring to enable for de-mounting of individual panels.
The Tile sides will be sufficiently high to ensure a minimum deflection across the
length of Tile. All Tiles will be bevel edged. The Tile shall be epoxy polyester
powder coating in white colour. The Tile shall be cllpped into clip in rail of 0.5mm
thick GI. in form of a grid system using a cross connector. The clip in rail shall be
supported from slab by means of rigid Suspension of 4mm G .I rod, Hold on Clamp
with Clip. POWDER COATING SPECIFICATION: Aluminium PANELS, cleaned
through eco friendly cleaning ,process and powder applied thru electrostatic charged
Automatic Carona technology spray guns and cured in combination of Infrared & hot
air oven in a certified plant as Akzo International approved applicator .

The powder is conforming with the performance requirements of the

AAMA2603.02 & Qualicoat Claa 1 specifications. The coating thickness will
be minimum 60 microns with properties of Salt Spray of 1500 hrs in exposure
in SST Cabinet with Minimum blister rating 8. (Tensile strength of
suspension-344/413 mpa and fastner strength-110kg) All Ceiling Panels shall
adhere to GreenPro Certifications.

BSR_B10 [235]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.43 Providing and fixing of Unperforated Metal Tile Ceiling System Sqm
comprising of Tile of 600mm wide and 600mm long manufactured out
of 0.5mm thick Galvanised Iron with beveled edge of 4.15mm width
height of 32mm. The tiles shall be plain. The Tile will be manufactured
on advanced equipment that includes several leveling stages in the
manufacturing process by approved manufacturers. Tile ends will be
raised with pips and slops to ensure positive engagement into the
spring to enable for de-mounting of individual panels. The Tile sides
will be sufficiently high to ensure a minimum deflection across the
length of Tile. All Tiles will be bevel edged. The Tile shall be epoxy
polyester powder coating in white colour. The Tile shall be cllpped
into clip in rail of 0.5mm thick GI. in form of a grid system using a
cross connector. The clip in rail shall be supported from slab by means
of rigid Suspension of 4mm G .I rod, Hold on Clamp with Clip.
POWDER COATING SPECIFICATION: Aluminium PANELS,
cleaned through eco friendly cleaning ,process and powder applied
through electrostatic charged Automatic Carona technology spray guns
and cured in combination of Infrared & hot air oven in a certified plant
as Akzo International approved applicator .
The powder is conforming with the performance requirements of the
AAMA2603.02 & Qualicoat Claa 1 specifications. The coating
thickness will be minimum 60 microns with properties of Salt Spray of
1500 hrs in exposure in SST Cabinet with Minimum blister rating 8.
(Tensile strength of suspension-344/413 mpa and fastner strength-
110kg) All Ceiling Panels shall adhere to GreenPro Certifications.

BSR_B10 [236]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.44 Supply & Fixing of torsion spring Plank Ceiling System, comprising of Sqm
Plank of 600mm wide and 1200mm long manufactured out of 0.7mm
thick Aluminium Alloy 3105 perforated 1.5mm dia With 22% open
area. The metal ceiling panels shall be downward accessible with a
minimum of four (4) torsion springs per panel . The Plank will be
manufactured on advanced CAD/CAM equipment that includes several
levelling stages in the manufacturing process. Torsion Spring panel with
two side legs die formed and two end legs die formed and punched to
receive torsion springs (min two springs each end or side) for secure
engagement into Tee Grid main runners which are factory punched to
receive torsion springs. Planks will be square edged. The metal ceiling
panels shall be downward accessible with a minimum of four (4) torsion
springs per panel. The Plank shall be Polyester powder coated in
desired colour. Main Runners: 24mm deep, inverted “Tee” sections,
3.6m long, with factory punched flanges to receive torsion spring
assembly. Main Tee on center spacing to match panel length. Cross
Runners: 24 mm deep, inverted “Tee” sections designed to interlock in
to web of main tee section on designated spacing. Cross tee length to
match panel length. Cross tees are spaced spacing 1200mm on center
maximum. Suspension System:

BSR_B10 [237]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
As per manufacturer standard considering type of plenum and its height.
Paint finish –
POWDER COATING SPECIFICATION: Aluminium PANELS,
cleaned through eco friendly cleaning ,process and powder applied
through electrostatic charged Automatic Carona technology spray guns
and cured in combination of Infrared & hot air oven in a certified plant
as Akzo International approved applicator . The powder is conforming
with the performance requirements of the AAMA2603.02 & Qualicoat
Claa 1 specifications. The coating thickness will be minimum 60
microns with properties of Salt Spray of 1500 hrs in exposure in SST
Cabinet with Minimum blister rating 8 Acoustic Felt (Optional): Non-
woven felt made of glass-reinforced fibre glued over the perforation for
sound absorption. NRC- 0.7.
(Tensile strength of suspension-344/413 mpa and fastner strength-
110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.

BSR_B10 [238]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
10.45 Supply & Fixing of torsion spring Plank Ceiling System, comprising of Sqm
Plank of 600mm wide and 600mm long manufactured out of 0.7mm
thick Aluminium Alloy 3105 perforated 1.5mm dia With 22% open
area. The metal ceiling panels shall be downward accessible with a
minimum of four (4) torsion springs per panel . The Plank will be
manufactured on advanced CAD/CAM equipment that includes several
levelling stages in the manufacturing process. Torsion Spring panel with
two side legs die formed and two end legs die formed and punched to
receive torsion springs (min two springs each end or side) for secure
engagement into Tee Grid main runners which are factory punched to
receive torsion springs. Planks will be square edged. The metal ceiling
panels shall be downward accessible with a minimum of four (4) torsion
springs per panel. The Plank shall be Polyester powder coated in
desired colour. Main Runners: 24mm deep, inverted “Tee” sections,
3.6m long, with factory punched flanges to receive torsion spring
assembly. Main Tee on center spacing to match panel length. Cross
Runners: 24 mm deep, inverted “Tee” sections designed to interlock in
to web of main tee section on designated spacing. Cross tee length to
match panel length. Cross tees are spaced spacing 1200mm on center
maximum.
Suspension System: As per manufacturer standard considering type of
plenum and its height. Paint finish – POWDER COATING
SPECIFICATION: Aluminium PANELS, cleaned through eco friendly
cleaning ,process and powder applied thru electrostatic charged
Automatic Carona technology spray guns and cured in combination of
Infrared & hot air oven in a certified plant as Akzo International
approved applicator . The powder is conforming with the performance
requirements of the AAMA2603.02 & Qualicoat Claa 1 specifications.
The coating thickness will be minimum 60 microns with properties of
Salt Spray of 1500 hrs in exposure in SST Cabinet with Minimum
blister rating 8. Acoustic Felt (Optional): Non-woven felt made of glass-
reinforced fibre glued over the perforation for sound absorption. NRC-
0.7. (Tensile strength of suspension-344/413 mpa and fastner strength-
110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.

BSR_B10 [239]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

10.46 Supply & Fixing of torsion spring Plank Ceiling System, comprising of Sqm
Plank of 600mm wide and 1200mm long manufactured out of 0.6mm
thick GALVANISED IRON perforated 1.5mm dia With 22% open area.
The metal ceiling panels shall be downward accessible with a minimum
of four (4) torsion springs per panel . The Plank will be manufactured on
advanced CAD/CAM equipment that includes several levelling stages in
the manufacturing process. Torsion Spring panel with two side legs die
formed and two end legs die formed and punched to receive torsion
springs (min two springs each end or side) for secure engagement into
Tee Grid main runners which are factory punched to receive torsion
springs. Planks will be square edged. The metal ceiling panels shall be
downward accessible with a minimum of four (4) torsion springs per
panel. The Plank shall be Polyester powder coated in desired colour.
Main Runners: 24mm deep, inverted “Tee” sections, 3.6m long, with
factory punched flanges to receive torsion spring assembly. Main Tee on
center spacing to match panel length. Cross Runners: 24 mm deep,
inverted “Tee” sections designed to interlock in to web of main tee
section on designated spacing. Cross tee length to match panel length.
Cross tees are spaced spacing 1200mm on center maximum.

BSR_B10 [240]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Suspension System: As per manufacturer standard considering type of
plenum and its height. Paint finish – POWDER COATING
SPECIFICATION: Aluminium PANELS, cleaned through eco friendly
cleaning ,process and powder applied thru electrostatic charged
Automatic Carona technology spray guns and cured in combination of
Infrared & hot air oven in a certified plant as Akzo International
approved applicator . The powder is conforming with the performance
requirements of the AAMA2603.02 & Qualicoat Claa 1 specifications.
The coating thickness will be minimum 60 microns with properties of
Salt Spray of 1500 hrs in exposure in SST Cabinet with Minimum
blister rating 8. Acoustic Felt (Optional): Non-woven felt made of glass-
reinforced fibre glued over the perforation for sound absorption. NRC-
0.7. (Tensile strength of suspension-344/413 mpa and fastner strength-
110kg)
All Ceiling Panels shall adhere to GreenPro Certifications.

10.47 Providing and installation of Poly Carbonate Sheet roofing over existing
steel framing as per drawing and design including fixing with non-
corrodible nuts and water proof washers as per instruction of Engineer-
in-charge.
(i) 6 mm thick Sqm
(ii) 10 mm thick Sqm

BSR_B10 [241]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-10
ROOFING

Rate (Rs.)
4

904.00
765.00
645.00

31.00

143.00

BSR_B10 [242]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
503.00
441.00

937.00

358.00

463.00
405.00

383.00

28.00

BSR_B10 [243]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
75.00

113.00

387.00
414.00
510.00
436.00

262.00
179.00
388.00
486.00
397.00
163.00
510.00
277.00

42.00

BSR_B10 [244]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
143.00

1648.00

20%

4483.00

5841.00
4862.00

277.00
251.00

358.00

350.00

BSR_B10 [245]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

473.00

BSR_B10 [246]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
111.00

154.00

317.00

911.00
1231.00
1872.00

10%

BSR_B10 [247]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
825.00

BSR_B10 [248]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1063.00

1365.00

913.00

BSR_B10 [249]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1025.00

649.00

745.00

1178.00

1317.00

BSR_B10 [250]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

855.00
989.00

BSR_B10 [251]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1650.00

BSR_B10 [252]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1562.00

1690.00

BSR_B10 [253]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1890.00

1550.00

1717.00

1627.00

BSR_B10 [254]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
4745.00

3775.00

BSR_B10 [255]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

3186.00

BSR_B10 [256]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

4117.00

BSR_B10 [257]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
3375.00

BSR_B10 [258]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2544.00

BSR_B10 [259]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
5253.00

BSR_B10 [260]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
5167.00

BSR_B10 [261]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

4452.00

BSR_B10 [262]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1447.00
1914.00
96512.30

BSR_B10 [263]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-11
FLOORING WORKS
Chapter
Description Unit
Code No
1 2 3

BRICK FLOORING
11.1 Brick on edge flooring with bricks of class designation 75 including
cement slurry & pointing in CM (1 : 3) etc. complete laid on 20 mm
thick bed of :
11.1.1 Cement Sand Mortar 1 : 4 Sqm

11.1.2 Cement Sand Mortar 1 : 6 Sqm

11.2 Dry brick on edge flooring in required pattern with bricks of class Sqm
designation 75 on a bed of 12 mm mud mortar including filling joints
with River sand complete.

CEMENT CONCRETE FLOORING

11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement including
cement slurry, making of lines or groove etc complete but excluding the
cost of nosing of steps etc. complete.
11.3.1 40mm thick with 20mm thick nominal size aggregate. Sqm

11.3.2 75mm thick with 20mm thick nominal size aggregate. Sqm

11.4 Providing and fixing 50mm thick cement concrete flooring with Sqm
Metallic concrete hardener topping, under layer of 38mm thick cement
concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate
20mm thick nominal size) and top layer of 12mm thick metallic concrete
hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm
nominal size) by volume & mixed with metallic hardening compound of
approved quality @ 2Kg./Sqm including cement slurry, rounding off
edges etc. but excluding the cost of nosing of step etc. complete.

11.5 Cement plaster in skirting and/dado 18 mm thick with cement mortar Sqm
1:3 (1 cement : 3 course sand) finished with a floating coat of neat
cement including rounding of junctions with floor .
Flooring_B11 [264]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

TERRAZZO FLOORING

11.6 40mm thick marble chips flooring rubbed and polished to granolithic finish
under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4
graded stone aggregate 12.5mm nominal size) including fixing of dividing
strip (excluding the cost of strips) and top layer 9mm thick with marble chips
of approved colour & 4mm to 7mm nominal size laid in cement marble chips
2 : 3 (2 cement : 3 marble chips) by volume including cement slurry etc.
complete
11.6.1 Dark shade pigment with ordinary cement. Sqm
11.6.2 Light shade pigment with ordinary cement. Sqm
11.6.3 Medium shade pigment with approximately 50% white cement and 50% Sqm
ordinary cement.
11.6.4 White cement without any pigment. Sqm
11.6.5 Light shade pigment with white cement. Sqm
11.6.6 Ordinary cement without any pigment. Sqm

11.7 40mm thick marble chips flooring rubbed and polished to granolithic finish
under layer 28mm thick cement concrete 1:2:4 (1 cement : 2 course sand : 4
graded stone aggregate 12.5mm nominal size) including fixing of dividing
strip (excluding the cost of strips) and top layer 12mm thick with marble chips
of approved colour 7mm to 10mm nominal size laid in cement marble chips
mix by weight in proportion of 2 : 3 (2 cement : 3 marble chips) by volume
including cement slurry etc. complete :
11.7.1 Dark shade pigment with ordinary cement. Sqm
11.7.2 Light shade pigment with ordinary cement. Sqm
11.7.3 Medium shade pigment with approximately 50% white cement and 50% Sqm
ordinary cement.
11.7.4 White cement without any pigment. Sqm
11.7.5 Light shade pigment with white cement. Sqm
11.7.6 Ordinary cement without any pigment. Sqm

Flooring_B11 [265]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.8 Marble chips skirting/dado rubbed and polished to granolithic finish 6mm
thick with white marble chips of approved colour and size from smallest to
4mm nominal size laid in cement marble chips mix in proportion of 4:7(4
cement : 7 marble chips) by volume including fixing of dividing strips
(excluding the cost of strips) complete in all respects : 18mm thick with
under layer of 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand) :
11.8.1 Dark shade pigment with ordinary cement. Sqm
11.8.2 Light shade pigment with ordinary cement. Sqm

11.8.3 Medium shade pigment with approximately 50% white cement and 50% Sqm
ordinary cement.
11.8.4 White cement without any pigment. Sqm
11.8.5 Light shade pigment with white cement. Sqm
11.8.6 Ordinary cement without any pigment. Sqm

11.9 Providing and fixing glass strips in joints of terrazo/ cement concrete
floors.
11.9.1 40mm wide and 4mm thick Mtr.
11.9.2 20mm wide and 3mm thick for skirting. Mtr.

11.10 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in Sqm
width including cost of forming, nosing etc.

11.11 Extra for terrazzo flooring in narrow band bands not exceeding 7.5cm Sqm
in width.

11.12 Crazy marble stone flooring 20mm thick marble stone with black or of Sqm
specified colour topping including filling the gaps with cement marble
chips mix in proportion of 4 : 7 (4cement : 7 white black or white or
black marble chips) size from 1mm to 4mm by volume and under layer
of 25mm thick cement concrete [1:2:4, graded stone aggregate 12.5mm
nominal size] rubbing and polishing and cement slurry etc. complete :
In ordinary cement.

TILE FLOORING

Flooring_B11 [266]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.13 Precast terrazo tiles of approved make, 20mm thick with marble chips of
size upto 6mm laid in floors, and landing, jointed with neat cement
slurry mixed with pigment to match the shade of the tiles, including
rubbing and polishing complete on 20mm thick bed of cement sand
mortar 1 : 4.
11.13.1 Light shade using white cement. Sqm
11.13.2 Medium shade using approximately 50% white cement and 50% Sqm
ordinary cement.
11.13.3 Dark shade using ordinary cement. Sqm
11.13.4 Ordinary cement without any pigment. Sqm

11.14 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in Sqm
width.

11.15 Precast terrazzo tiles of approved make 20mm thick with marble chips
of size upto 6mm in skirting & risers, treads of steps and dados 12mm
thick cement plaster 1:3 (1 cement : 3 coarse sand) jointed with neat
cement slurry mixed with pigment to match the shade of the tiles,
including rubbing and polishing complete with tiles of :

11.15.1 Light shade using white cement. Sqm

11.15.2 Medium shade using approximately 50% white cement and 50% Sqm
ordinary cement.
11.15.3 Dark shade using ordinary cement. Sqm
11.15.4 Ordinary cement without any pigment. Sqm

11.16 Providing & laying Chequered terrazzo tiles of approved make 22mm
thick with marble chips of size upto 6mm, in floors, jointed with neat
cement slurry mixed wit pigment to match the shade of tiles including
rubbing and polishing complete in all respect as per specification, on
28mm thick bed of C.M. 1:4 :

11.16.1 Light shade using shade cement. Sqm

11.16.2 Medium shade using approximately 50% white cement and 50% Sqm
ordinary cement.
11.16.3 Dark shade using ordinary cement. Sqm
11.16.4 Ordinary cement without any pigment. Sqm

Flooring_B11 [267]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.16.5 Add extra for non slipping 9-12 mm ironite topping tiles Sqm

11.17 Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard jointed with neat cement slurry mixed with pigment to match

the shade of tiles including rubbing and cleaning etc. complete on 20

mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)

11.17.1 Light shade using shade cement. Sqm

11.17.2 Medium shade using approximately 50% white cement and 50% Sqm
ordinary cement.
11.17.3 Dark shade using ordinary cement. Sqm
11.17.4 Ordinary cement without any pigment. Sqm
11.17.5 Add Extra for polished chequered precast cement concrete tiles over
item No. 11.17.1, 11.17.2, 11.17.3, 11.17.4

KOTA STONE FLOORING

11.18 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base
laid over and jointed with grey cement slurry mixed with pigment to
match the shade of the slab including rubbing and polishing complete
with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
11.18.1 For area of each slab from 901 to 2000 Sq.Cm : Sqm
11.18.2 For area of each slab from 2001 to 5000 Sq.Cm Sqm

11.19 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3
coarse sand) and jointed with grey cement slurry mixed with pigment to
match the shade of the slabs, including rubbing and polishing complete
11.19.1 For area of each slab upto 2001 Sqcm Sqm
11.19.2 For area of each slab from 2001 to 5000 Sqcm Sqm

11.20 Rough Chisel dressed Kota stone 35 mm thick flooring of approved shade set Sqm
in pattern over 20mm thick base of cement mortar 1:6 (1 cement : 6 coarse

sand) and pointing with cement sand mortar 1:3 with pigment to match the

shade of stone with joint thickness up to 15 mm complete in all respects :

Flooring_B11 [268]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
SAND STONE FLOORING

11.21 Rough Chisel dressed Sand stone 35 mm thick flooring of approved

shade set over 20mm thick base of cement mortar 1:6 (1 cement : 6
coarse sand) and pointing with cement sand mortar 1:3 with pigment to
match the shade of stone with joint thickness up to 15 mm complete in
all respects :
11.21.1 Red sand stone (Karauli stone) Sqm
11.21.2 Pink sand stone (Bansi Paharpur stone) Sqm
11.21.3 Mandana stone Sqm

11.22 Fine dressed & machine cut edges 30-35 mm thicksand stone flooring
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4
coarse sand) jointed grey cement slurry mixed with pigment to match
the shade of stone complete as per design drawing and instruction of EI.
11.22.1 Red sand stone (Karauli stone) Sqm
11.22.2 Pink sand stone (Bansi Paharpur stone) Sqm
11.22.3 Mandana stone Sqm

11.23 Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm

(average) thick base of cement mortar 1:4 (1 cement :4 coarse sand)

jointed grey cement slurry mixed with pigment to match the shade of

stone complete as per design drawing and instruction of EI.

11.23.1 Red sand stone (Karauli stone) Sqm
11.23.2 Pink sand stone (Bansi Paharpur stone) Sqm
11.23.3 Mandana stone Sqm

11.24 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone Sqm
slab.

11.25 Extra for Mirror polishing on terrazzo/Kota stone work where ever Sqm
required to give high gloss finish complete.

11.26 Random rubble dry stone Kharanja under floor. Cum

11.27 Filling of sunk portion of roof with earthen pots of required height Cum
including filling voids with 1:3:6 light concrete, using brick bats
complete levelling and dressing the surface by 50mm thick cement
concrete 1:2:4 as per specification.

Flooring_B11 [269]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.28 Providing and fixing designer cement concrete polished tiles over 20mm Sqm
average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement
mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the
tiles having minimum thickness of 25mm complete with all respect. ( as
per IS 1237:2012)

11.29 Providing and laying at or near ground level factory made kerb stone of Cum
M-25 grade cement in position to the required line, level and curvature
jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including
making joints with without grooves (thickness of joints except at sharp
curve shall not to more than 5mm) including making drainage opening
wherever required complete including painting etc. as per direction of
Engineer-in-charge (length of finished kerb edging shall be measured for
payment). (Precast C.C. kerb stone shall be approved by Engineerin-
charge).

11.30 Providing and laying M30 grade controlled cement concrete pavements Cum
including mixing and vibrations concrete with necessary needle
vibrators and surface with screed board vibrating complete in all respect
with 20/25 mm stone aggregate (crusher broken) including anti-skid
textured finish to required camber/ super elevation and grade including
curing etc. as per specification with cement concrete M-30 grade
including cost of Steel frame work for sides of C.C. pavement consisting
of M. S. channels flats and angles with required steel pegs ( some of
them may left embedded in concrete/ including providing frame work)

11.31 Extra for vacuum processed concrete including cost of equipments Sqm..
labour etc.

11.32 Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide using

mechanical concrete cutter including cost of diamond bit cutting wheel
and filling of bitumen sealing compound in groove including cost of
sealing compound.
11.32.1 25 mm depth P Mtr.
11.32.2 50 mm depth P Mtr.

Flooring_B11 [270]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.32.3 75 mm depth P Mtr.
11.32.4 100 mm depth P Mtr.

WOODEN FLOORING

11.33 25mm thick wooden planking, tongued and grooved in flooring Sqm
including fixing with iron screws complete (Lower frame to be paid
extra) with :First class Teak wood.

11.34 Providing and laying wooden flooring with a direct laminated surface Sqm
treated with aluminum oxide on top of a high-density fiber board with a
density of 850 Kg./per Mtr. having a click system tongue and groove
joint to secure a long lasting joint. The planks are or termite resistant
and water protected with both side lamination Wooden flooring Planks
of size 1208 x 194 x 8 mm / 1215x294x8 mm (8mm thick laminated
floor class of use 23/31 having a wear resistance level of AC-3 , impact
resistance > 9mm, moisture resistance 3-10% as per (EN-424, EN – 438
EN – 425 EN – 417 – 2)or PREN 3329 complete in all respect as per
direction of EI

11.35 Providing and laying of skirting 89 mm wide having both side Rm

laminations with moulding in upper side with matching of floor fixing
with nails and screws & fevicol complete in all respect as per direction
of EI.

11.36 Providing and laying transaction/adaptation profile with fixing of nails, Rm

screws & fevicol complete in all respect as per direction of EI.

PVC FLOORING

11.37 Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring

confirming to I.S.-3462 Flooring of approved make with fibre base
using rubber base adhesives including rolling with light wooden roller
complete :

11.37.1 1.0 mm thick. Sqm

Flooring_B11 [271]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.37.2 1.5 mm thick. Sqm
11.37.3 2.0 mm thick. Sqm

Paver Block

11.38 Providing and laying of paver block as per IS 15658 : 2006 (Indian
standard for precast concrete block for paving- specification) and IRC :
SP:63-2004 (guidelines for the use of interlocking concrete block
pavement)
11.38.1 M-30, 60 mm thick to be used in non traffic areas like building
premises, monument premises, land scapes, public gardens/ park,
domestic drives, paths and patios, Embankment slopes, sand
stabilization Area etc.( As per table 1 of IS 15658:2006
(A) Category A Denated units to key into each other on four faces zigzag Sqm
shape as per IRC SP 63:2004
(B) Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP Sqm
63:2004
(C) Category ‘C’not denated on any it’s faces like Hexagon, Rectangular, Sqm
square shape as per IRC SP 63:2004

11.38.2 M-35,60mm thick to be used in light traffic (Light traffic is defined as a

daily traffic up to 150 commercial vehicles exceeding 30 KN laden
weight, or an equivalent up to 0.5 million standard axles (MSA) for a
design life of 20 years (A standard axle is defined as a single axle load
of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car
parks, office driveways , housing colonies, office complexes, rural roads
with low volume traffic, farm houses , beach sites, tourist resorts, local
authority footways, residential roads, etc.
(A) Category A Denated units to key into each other on four faces zigzag Sqm
shape as per IRC SP 63:2004
(B) Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP Sqm
63:2004
(C) Category ‘C’not denated on any it’s faces like Hexagon, Rectangular, Sqm
square shape as per IRC SP 63:2004

Flooring_B11 [272]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.38.3 M-40,80mm thick to be used in medium- traffic ( Medium traffic is
defined as a daily traffic of 150-450 commercial vehicles exceeding 30
KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of
20 years.) like city streets, small and medium market roads, low volume
roads, utility cuts on arterial roads, etc
(A) Category A Denated units to key into each other on four faces zigzag Sqm
shape as per IRC SP 63:2004
(B) Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP Sqm
63:2004
(C) Category ‘C’not denated on any it’s faces like Hexagon, Rectangular, Sqm
square shape as per IRC SP 63:2004

11.38.4 M-50 100mm thick to be used in heavy-traffic ( Heavy traffic is defined

as a daily traffic of 450-1500 commercial vehicles exceeding 30 KN

laden weight, or an equivalent of 2.0 to 5.0 MSA for a design life of 20

years.) like Bus terminals, industrial complexes, mandi houses roads on

expansive soils, factory floor , service station, industrial pavements.etc.

(A) Category A Denated units to key into each other on four faces zigzag Sqm
shape as per IRC SP 63:2004
(B) Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP Sqm
63:2004
(C) Category ‘C’not denated on any it’s faces like Hexagon, Rectangular, Sqm
square shape as per IRC SP 63:2004

11.38.5 M-55 120mm thick to be used in very heavy-traffic ( very heavy-traffic

is defined as a daily traffic of more than 1500 commercial vehicle

exceeding 30 KN laden weight, or an equivalent of more than 5.0 MSA

for a design life of 20 years.) like container terminals, ports, block yards,

mine access roads, bulk cargo handling areas, airport pavements, etc.
(A) Category A Denated units to key into each other on four faces zigzag Sqm
shape as per IRC SP 63:2004
(B) Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP Sqm
63:2004
(C) Category ‘C’not denated on any it’s faces like Hexagon, Rectangular, Sqm
square shape as per IRC SP 63:2004

Flooring_B11 [273]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

11.39 Add extra over item No. 11.38, A to C if reflective paver block, Sqm

manufactured with wet cast vibration system in two layers is used.

11.40 Add extra over rates of item No. 11.38, A to C if colored paver blocks Sqm
are used

11.41 Providing and fixing 25 mm thick Non slippery reflective type designer
paving tile with metallic hardening using 2 Kg/sq.mtr made out of
cement concrete of required grade, sizes of tile upto 300X300 mm
Manufactured with wet cast Vibration system in two layers and laid over
base of 20 mm thick cement morter1:4 using neat cement slurry in
cluding finishing of joints etc. complete.
(A) Using M-40 grade cement Concrete Sqm
(B) Using M-30 grade cement Concrete Sqm

11.42 Add extra over 11.41, A & B if coloured wearing course (as per IS Sqm
1237:1980) is used.

11.43 25mm thick fine dressed and machine grinded surface stone flooring
over 20mm (av.) thick base in cement in CM 1:6 with joints finished
flush with:

11.43.1 Red sand stone Sqm

11.43.2 White sand stone Sqm

Flooring_B11 [274]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
11.44 Providing & Laying Tactile tile (for vision impaired persons is standard Sqm
of size 300x300x20mm and confirming to IS 1231 of 1980 (Re affirmed
in 2006) in all colours & sheds further product should confirm ASTM
303 for shad resistance and DIN51099 for colour fastness etc. laid on
20mm thick base of cement mortar 1:4 (1 cement : 4 course sand) in all
shapes & patterns including grouting the joint which white cement
mixer) will matching pigments etc complete is per direction of Engineer-
in-charges. Grade M 30

Flooring_B11 [275]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-11
ORING WORKS
Rate (Rs.)
4

510.00

487.00

450.00

277.00

458.00

453.00

284.00

Flooring_B11 [276]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

485.00
707.00
539.00

520.00
476.00
450.00

519.00
597.00
569.00

562.00
586.00
469.00

Flooring_B11 [277]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

625.00
667.00

649.00

650.00
620.00
603.00

31.00
17.00

26.00

14.00

579.00

Flooring_B11 [278]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

542.00
549.00

473.00
534.00

32.00

690.00
681.00

672.00
682.00

684.00
683.00

618.00
569.00

Flooring_B11 [279]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
10%

571.00
673.00

523.00
473.00
10%

950.00
1023.00

912.00
1002.00

627.00

Flooring_B11 [280]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

619.00
653.00
653.00

773.00
883.00
883.00

825.00
937.00
937.00

72.00

121.00

932.00

1775.00

Flooring_B11 [281]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1180.00

6103.00

5514.00

101.00

46.00
94.00

Flooring_B11 [282]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
140.00
187.00

2973.00

2311.00

979.00

906.00

760.00

Flooring_B11 [283]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
867.00
990.00

816.00

786.00

736.00

961.00

933.00

850.00

Flooring_B11 [284]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1089.00

1060.00

1003.00

1311.00

1282.00

1224.00

1521.00

1492.00

1434.00

Flooring_B11 [285]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

10%

20%

1509.00
1368.00

20%

513.00
624.00

Flooring_B11 [286]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1284.00

83052.70

Flooring_B11 [287]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-12
FINISHING WORK
Note :
1 The rates are for complete work including racking of joints, curing,
grinding, mixing and finishing T & P and scaffolding material and cost
of material with all lead and lift
2 The rates cover protection of all places and things, requiring protection
and cleaning such places and thing of all droppings and splashes of
mortar etc.
3 The Rate for external plaster are for height up to 10 m from ground level
unless otherwise stated.
4 Cement mortar is to be made by mechnical mixer only.

Chapter
Description Unit
Code No
1 2 3

CEMENT PLASTER

12.1 Plaster on new surface on wall in cement sand mortar 1:3 including
racking of joints etc. complete fine finish :
12.1.1 25 mm thick Sqm.
12.1.2 20mm thick Sqm
12.1.3 12mm thick Sqm

12.2 Plaster on new surface on walls in cement sand mortar 1:4 including
racking of joints etc. complete fine finish :
12.2.1 25 mm thick. Sqm
12.2.2 20mm thick . Sqm
12.2.3 12mm thick . Sqm

12.3 Plaster on new surface on walls in cement sand mortar 1:6 including
racking of joint etc. complete fine finish :
12.3.1 25 mm thick Sqm
12.3.2 20mm thick. Sqm
12.3.3 12mm thick. Sqm

12.4 Plaster on new surface on walls in cement sand mortar 1:8 including
racking of joint etc. complete fine finish :
12.4.1 25mm thick. Sqm
12.4.2 20mm thick. Sqm
12.4.3 12mm thick. Sqm

BSR_B12 [288]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.5 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) Sqm.

12.6 6mm thick cement plaster 1:3 ( 1cement : 3 fine sand) finished with a Sqm.
floating coat of neat cement and thick coat of Lime wash on top of
walls when dry for bearing of R.C.C slabs and beams.

12.7 Finishing with neat cement (punning). Sqm

12.8 Extra for providing and mixing water proofing material in cement Kg.

plaster work in proportion recommended by the manufacturers.

ROUGH CAST PLASTER

12.9 Rough cast plaster upto 10m height above ground level with a mixture Sqm
of sand and gravel or crushed stone from 6mm to 10mm nominal size
dashed over and including the fresh plaster in two layers, under layer
12mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm
cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely
grounded hydrated lime by volume of cement.
Ordinary cement finish using ordinary cement

12.10 Pebble dash plaster upto 10m height above ground level with a mixture Sqm
of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed
over and including fresh plaster in two layers under layer 12mm cement
plaster 1:4 (1 cement : 4 coarse sand) and top layer 10mm cement
plaster with cement mortar 1:3 (1 cement : 3 fine sand) with 10% finely
grounded hydrated lime by volume of cement

BSR_B12 [289]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.11 Washed stone grit plaster on exterior walls of height upto 10 M. above Sqm
level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4
coarse sand ) furrowing the under layer with scratching tool, applying
cement slurry on the under layer @ 2kg of cement per sqm, top layer 15
mm cement plaster 1:1/2:2 ( 1 cement : 1/2 coarse sand : 2 stone
chipping size 10 mm nominal size) in panel with groove all around as
per approved pattern including scrubbing and washing, the top layer
with brushes and water to expose the stone chipping, complete as per
specification and direction of Engineer in charge. (Payment for
providing grooves shall be made separately)

12.12 Forming groove of uniform size 15x15mm and upto 25x15mm in the Rm
top layer of washed stone grit plaster as per approved pattern using
wooden battens, nailed to the under layer including removal of wooden
battens, repair to the edges of panels and finishing the groove complete
as per specification and direction of Engineer in charge

12.13 Extra for using white cement in place of ordinary cement in the top layer Sqm
of the item of washed stone grit plaster.

12.14 Extra for plastering exterior walls of height more than 10 m from ground Sqm

level for every additional height of 3 m or part thereof.

12.15 Extra for plastering on circular work not exceeding 6 m in radius: Sqm

12.16 Extra for plastering done on moulding cornices or architraves including

neat finish to line and level:
12.16.1 In one coat Sqm
12.16.2 In two coats Sqm

12.17 Extra for plastering :

12.17.1 Spherical ceiling Sqm
12.17.2 Groined ceiling Sqm
12.17.3 Flewing soffits Sqm

BSR_B12 [290]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.18 Extra for lining out plaster to imitate stone or concrete blocks walling Sqm

12.19 Making grooves as per design in plaster 10mm to 20mm wide. Rm

12.20 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 Rm
mm and 10 mm thick as per approved design

12.21 12 mm thick plain cement mortar bands in cement mortar 1:4 (1

cement : 4 fine sand) :
12.21.1 Flush band. Cm P Rm
12.21.2 Sunk band. Cm P Rm
12.21.3 Raised Band Cm P Rm
12.21.4 Moulded band. Cm P Rm

12.22 Providing and applying white cement based putty over plastered surface

to prepare the surface even and smooth complete

12.22.1 New Plastered Surface (three or more coats) Sqm
12.22.2 Old Plastered Surface (two or more coats) Sqm

12.23 Providing and applying plaster of paris putty of 2 mm thickness over Sqm

plastered surface to prepare the surface even and smooth complete

12.24 Providing & Laying POP moulding & beading in ceiling including
nailing & scafollding etc. complete of size :
12.24.1 25mm x 12mm Rm
12.24.2 25mm x 25 mm Rm

12.25 Providing & Laying POP Cornice of required design & pattern in
ceiling including nailing & scafollding etc. complete with fine
finishing of size:
12.25.1 50mm x 50mm Rm
12.25.2 65mm x 65mm Rm
12.25.3 75mm x 75mm Rm

BSR_B12 [291]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.26 Lime plaster ( up to 40 mm thick in 3 Coats) on new surface on walls Sqm
with lime sand mortar 1:2 (1 lime putty : 2 sand) using admixture like
Gur, Methi & Gugal @ 1.0 Kg./each for every 10 Sqm of area including
racking of joints curing etc. complete

12.27 Coloured Araish work 1 : 2 (1-lime putty : 2-Zikki ) over lime plaster or Sqm
plain back ground including preparation of lime for 6 months by slaking
of lime with curd and changing the water every week. The kara plaster
of not more than 6 mm thick is to be left for maximum of 3 months to
appear the shrinkage & temperature cracks over the kara plaster 2 mm
layer of grinded lime putty is to be done and is to be rubbed gently by
Akik stone then inserting the design of colour border/ flowers/pictures
etc including desired colour stone pigment to match the existing
design/pattern after this, applying Khopra paste & rubbing with cloth to
give a uniform picture. The work to be executed strict as per direction of
Engineer Incharge

12.28 Yellow/pink colour wash with Khameera mixed with pigment including
making gola garden, Kangoora and ornamental lining work as per
aprroved Jaipur style and pattern complete in all respest as per direction
of Engineer in Charge
12.28.1 On New Surface ( 3 coats) Sqm
12.28.2 On old Surface ( 3 coats) Sqm

12.29 Extra for making Ornamental design like Kangooras Gola etc. as per Sqm
Jaipur practice in cement plaster

POINTING

12.30 Pointing on brick work or brick flooring with cement mortar 1:3 (1
cement : 3 fine sand) :

12.30.1 Flush / Ruled/ Struck or weathered pointing. Sqm

12.30.2 Raised and cut pointing Sqm

BSR_B12 [292]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.31 Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3
sand) :
12.31.1 Flush / Ruled/ Struck or weathered pointing. Sqm
12.31.2 Raised and cut pointing. Sqm
12.31.3 Deep groove pointing Sqm

12.32 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine Sqm
sand):
Flush/ Ruled pointing

12.33 Extra for pointing on walls on the outside at height more than 10 m Sqm

from ground level for every additional height of 3 m or part there of.

INTERIOR FINISHING

12.34 White washing with lime to give an even shade including all
scaffolding:

12.34.1 New work (three or more coats). Sqm

12.34.2 Old work (two or more coats) including scrapping old surface and Sqm
repairing with whiting where ever necessary.
12.34.3 Old work (one or more coats) including scrapping old surface and Sqm
repairing with putty where ever necessary.

12.35 Colour washing of all shades to give an even shade including all
scaffolding :
12.35.1 New work (two or more coats) with a base coat of white washing with Sqm
lime.
12.35.2 New work (two or more coats) with a base coat of whiting. Sqm
12.35.3 Old work (one or more coats) with whiting with a base coat of white Sqm
washing including scrapping old surface.
12.35.4 Old work (two or more coats) with whiting with a base coat of white Sqm
washing including scrapping surface.
12.35.5 Old work (one or more coats) with lime including scrapping surface. Sqm

12.35.6 Old work (one or more coats) with whiting including scrapping surface. Sqm

BSR_B12 [293]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.35.7 Removing white or colour wash by scrapping and sand papering and Sqm
preparing the surface smooth including necessary repairs to scratches by
sandla/loi. (only for colour changing ).

12.36 Distempering with dry distemper of approved brand and shade (two or Sqm
more coats) and of required shade on new work, over and including,
priming coat of whiting to give an even shade including all scaffolding.

12.37 Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade including all scaffolding:

12.37.1 New work (two or more coats) over and including scrapping and Sqm
priming coat with cement primer.
12.37.2 Old work (one or more coats) including scrapping surface
and necessary repairs.
(a) Colour Change Sqm
(b) Same colour Sqm
12.37.3 Removing dry or oil bound distemper by scrapping sand papering and Sqm
preparing surface smooth including necessary repairs to scratches by
sandla/loi and all scaffolding (for colour changing only)

12.38 Distempering with 1st quality acrylic washable distemper (ready mixed) Sqm
of approved manufacturer and of required shade and colour
completeincluding all scaffolding as per manufacturer's specification.
Two or more coats on new work including prepartion of base with
primer, putty, lippy etc complete in all respect.

12.39 Applying one coat of Cement primer of approved brand and Sqm
manufacture on wall surface including all scaffolding:

12.40 Wall painting with plastic emulsion paint of approved brand and
manufacture to give an even shade including all scaffolding:

12.40.1 Two or more coats on new work including prepartion of base with Sqm
primer, putty, lippy etc complete in all respect.
12.40.2 Old work (One or more coats ) Sqm

BSR_B12 [294]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

EXTERIOR FINISHING

12.41 Finishing wall with water proofing cement paint of approved brand and
manufacture and or required shade to give an even shade including all
scaffolding:
12.41.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). Sqm

12.41.2 Old work (One or more coats). Sqm

12.42 Finishing walls with Acrylic Smooth exterior paint of required shade Sqm
including all scaffolding.
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and
including base coat of water proofing cement paint applied @ 2.20 kg/
10 sqm ).

12.43 Painting exterior surface of Wall with 100% acrylic exterior paint of
approved brand and manufacture to give an even shade with two or
more coats including prepartion of base with sand papering, primer,
putty, etc complete in all respect including scaffolding and safety
provision

12.43.1 New Work Sqm

12.43.2 Old Work Sqm

12.44 Finishing walls with textured exterior paint of required shade as per
approved colour complete as per manufacturers specifications including
primer coat and protecting coat including scaffolding and safety
provision

12.44.1 Roller Finish av. thickness 400 to 500 microns. Sqm

12.44.2 Trowel Finish av. thickness 1000 to 1200 microns. Sqm
12.44.3 Trowel Finish av. thickness 1500 to 2000 microns. Sqm
12.44.4 Trowel Finish av. thickness 2000 to 2500 microns. Sqm

PAINTING

12.45 Applying priming coat :

12.45.1 With ready mix pink or gray primer of approved brand and manufacture Sqm
on wood work hard and soft wood.
12.45.2 With ready mix Aluminium primer of approved brand and manufacture Sqm
on resinous wood and plywood.

BSR_B12 [295]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.45.3 With ready mixed red oxide zinc chromate primer of approved brand Sqm

and manufacture on steel galvanised iron/steel works

12.45.4 With ready mixed red oxide zinc chromate primer of approved brand Sqm

and manufacture on steel work (second coat)

12.46 Painting with synthetic enamel paint of approved brand and manufacture
to give an even shade :

12.46.1 Two or more coats on new work Sqm

12.46.2 One or more coats on old work. Sqm

12.47 Varnishing with varnish of approved brand and manufacture :

12.47.1 Two or more coats glue sizing with copal varnish over an under coat of Sqm
flatting varnish.
12.47.2 Two or more coats glue sizing with spar varnish or an under coat of Sqm
flatting varnish.

12.48 French sprit polishing :

12.48.1 Two or more coats on new work including a coat of wood filler. Sqm

12.48.2 One or more coats on old work. Sqm

12.49 Polishing on wood work with ready mixed wax polish of approved
brand and manufacture :
12.49.1 New Work Sqm
12.49.2 Old Work. Sqm

12.50 Providing and applying Melamine polish on teak wood work of

approved brand and manufacture to give an even shade with two or
more coats by compressor including sand papering, wood filler coat etc
complete in all respect:
12.50.1 New Surface Sqm
12.50.2 Old Surface Sqm

12.51 Painting one thin coat with white lead of approved brand and Sqm
manufacture on wet or patchy portion of plastered surfaces.

BSR_B12 [296]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.52 Painting (two or more coats) on rain water soil, waste and vent pipes and
fitting with black anticorrosive bitumastic paint of approved brand and
manufacture over and including a priming coat of ready mixed zinc
chromate yellow primer on new work :
12.52.1 75mm dia. Pipes. Mtr.
12.52.2 100mm dia. Pipes Mtr.
12.52.3 150mm dia. Pipes. Mtr.

12.53 Painting (one or more coats) on rain water soil, waste and
vent pipes and fitting with black anticorrosive bitumastic paint
of approved brand and manufacture on old work :
12.53.1 50mm dia. Pipes. Mtr.
12.53.2 75mm dia. Pipes. Mtr.
12.53.3 100mm dia. Pipes Mtr.
12.53.4 150mm dia. Pipes. Mtr.

12.54 Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour over a priming coat of approved steel
primer on new work.
12.54.1 75mm dia. Pipes. Mtr.
12.54.2 100mm dia. Pipes Mtr.
12.54.3 150mm dia. Pipes. Mtr.

12.55 Painting (two or more coats) on rain water, soil, waste and vent pipes
and fittings with synthetic enamel paint of approved brand and
manufacture and required colour over a priming coat of approved steel
primer on old work.
12.55.1 50mm dia. Pipes. Mtr.
12.55.2 75mm dia. Pipes. Mtr.
12.55.3 100mm dia. Pipes Mtr.
12.55.4 150mm dia. Pipes. Mtr.

12.56 Painting with oil type wood preservative of approved brand and
manufacture :
12.56.1 New work (Two or more coats). Sqm
12.56.2 Old work (One or more coats). Sqm

BSR_B12 [297]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
12.57 Providing and applying two coats of fire retardant paint unthinned on Sqm

cleaned wood/ply surface @ 3.5 sqm per litre per coat including

preparation of base surface as per recommendations of manufacturer to

make the surface fire retardant.

12.58 Coal-tarring coats on new work using 0.16 and 0.12 litre of coal tar per Sqm
Sqm in the first and second coat respectively.

12.59 Painting with Aluminium paint of approved brand and manufacture to

give an even shade :
12.59.1 Two or more coats on new work. Sqm
12.59.2 One or more coats on old work. Sqm

12.60 Painting with acid proof paint of approved brand and manufacture
of required colour to give an even shade :
12.60.1 Two or more coats on new work . Sqm
12.60.2 One or more coat on old work . Sqm

12.61 Painting with black anti-corrosive bitumastic paint of approved

brand and manufacture to give an even shade :

12.61.1 Two or more coats on new work. Sqm
12.61.2 One or more coat on old work. Sqm

12.62 Lettering with black Japan paint of approved brand and manufacture. P. Letter
Per cm.
height
12.63 Re-lettering with black Japan paint of approved brand and manufacture. P. Letter
Per cm.
height

12.64 Providing and applying superior quality emulsion for wall painting with
Velvet touch/Royal paint etc of approved brand and manufacture to give
an even shade with putty and preparation of surface applying with the
help of paint roller the work complete in all respect as per direction of
Engineer-in-charge.
12.64.1 New Work Three or More coat Sqm
12.64.2 Old Work Analysis Sqm

BSR_B12 [298]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

12.65 Spray painting in approved shade and approved quality with Duco paint Sqm
of required colour to give even shade with two or more coats by
compressor including sand papering, NC putty filler coat etc complete in
all respect as per design given by Engineeer incharge on new work.

12.66 Providing and applying P.U. paint of apporved brand and manufature to Sqm
even shade.
Two or more coats on New works.

12.67 Wall painting with Royal Play paint with various types of designs as Sqm
approved of approved brand and manufacture to give an even shade
including all scaffalding.
Two or more coats on New work including preparation of base with
primer, putty lippy etc. Complete in all respect.

12.68 Lining work on Yellow & Pink Exterior Paint/ Colour wash including Sqm
making Gola, Gardana, Kangoora and Orgnamental lining work as per
approved style and pattern complete in all respect with Exterior
(White/Brown) paint as required complete in all respect as per direction
givin by Engineer in charge.

12.69 Face lifting (Doba Wash) with washing of stones by (1:20) acid & water Sqm
solution, rubbing by brush, washing by clear water, pointing of damaged
grooves & doba washing with good quality lime water and painting of
doors, windows, ventilators upto all height & lead including all
scaffolding and T&P etc. complete as per instructions and direction of
Engineer-in-charge.

BSR_B12 [299]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-12
ISHING WORK

Rate (Rs.)
4

242.00
211.00
164.00

227.00
202.00
163.00

211.00
190.00
160.00

176.00
164.00
140.00

BSR_B12 [300]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
139.00

163.00

36.00

42.00

340.00

323.00

BSR_B12 [301]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
510.00

25.00

36.00

34.00

15.00

210.00
348.00

64.00
70.00
42.00

BSR_B12 [302]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
34.00

7.00

11.00

3.00
3.00
3.00
5.00

84.00
46.00

69.00

61.00
72.00

112.00
124.00
146.00

BSR_B12 [303]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
353.00

3681.00

88.00
48.00

50%

80.00
133.00

BSR_B12 [304]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

124.00
233.00
220.00

78.00

4.00

11.00
6.00

3.00

14.00

15.00
7.00

6.00

4.00

4.00

BSR_B12 [305]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
4.00

53.00

75.00

15.00
11.00
4.00

43.00

14.00

80.00

40.00

BSR_B12 [306]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

53.00

20.00

86.00

123.00
50.00

171.00
347.00
404.00
473.00

29.00

29.00

BSR_B12 [307]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
23.00

12.00

69.00
34.00

89.00

94.00

167.00

57.00

69.00
29.00

887.00
606.00

36.00

BSR_B12 [308]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

17.00
26.00
40.00

3.00
5.00
7.00
10.00

17.00
29.00
40.00

3.00
5.00
7.00
8.00

21.00
11.00

BSR_B12 [309]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
353.00

23.00

53.00
17.00

54.00
26.00

47.00
19.00

2.00

1.00

246.00
162.00

BSR_B12 [310]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1859.00

304.00

365.00

43.00

73.00

18731.50

BSR_B12 [311]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-13
REPAIRS TO BUILDING
Chapter
Description Unit
Code No
1 2 3

13.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. Sqm
metres and under including cutting the patch in proper shape, raking out
joints and preparing and plastering the surface of the walls complete
including disposal of rubbish to the dumping ground within 50 m lead
With cement mortar 1 :4 ( 1 cement : 4 coarse sand)

13.2 Fixing chowkhats in existing opening including embedding chowkhats

in floors or walls cutting masonry for holdfasts embedding hold fasts in
cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) painting two coats
of coal tar to sides of chaukhats and making good the damages to walls
and floors as required complete including disposal of rubbish to the
dumping ground within 50 metres lead.
13.2.1 Door chowkhats Each
13.2.2 Window chowkhats Each
13.2.3 Clerestory window chowkhats Each

13.3 Making the opening in masonry including dismantling in floor or walls Sqm
by cutting masonry and making good the damages to walls, flooring and
jambs complete to match existing surface i/c disposal of mulba/ rubbish
to the nearest municipal dumping ground. For
door/windows/clerestory windows

13.4 Renewing glass panes,with putty and nails wherever necessary

13.4.1 Float glass panes of thickness 4 mm Sqm

13.4.2 Float glass panes of thickness 5 mm Sqm

13.5 Renewing glass panes with wooden fillets wherever necessary :

13.5.1 4mm thick plain glass panes. Sqm

13.5.2 5mm thick plain glass panes. Sqm

13.6 Renewing glass panes and refixing existing wooden fillets :

13.6.1 4mm thick plain glass panes. Sqm
13.6.2 5mm thick plain glass panes. Sqm
BSR_B13 [312]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

13.7 Supplying and fixing new wooden fillets wherever necessary: Rm

2nd class teak wood fillets

13.8 Renewal of old putty of glass panes (length) Rm

13.9 Refixing old glass panes with putty and nails Sqm

13.10 Fixing old glass panes with wooden fillets (Excluding cost of fillets) Sqm

13.11 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size Each
in existing R.C.C. slab including cutting chase and making good and
painting exposed portion of the clamps complete.

13.12 Repair to stone masonary in cement sand mortar 1:6 with old and new Sqm
stone.

13.13 Repair to brick masonary in cement sand mortar 1:6 with new brick. Sqm

13.14 Cement plaster 1:3 under old stone slabs with admixture
(gur,nails,binding wire to mesh and scraping scales & dressing joints of
slabs complete.
13.14.1 Proofing upto 25 mm thickness. Sqm
13.14.2 Proofing above 25 mm thickness& upto 60 mm thickness Sqm

13.15 Patch repair to cement concrete floor including digging out old floor in Sqm
regular shape and removal of rubbish curing etc. complete in all
respects.

13.16 Washing floor with soda, soap or other cleaning material. Sqm

13.17 Removal and refixing stone chhajja 50 to 75 mm thick including Sqm

finishing, complete in all respects.

13.18 Replacing broken roofing slab in patches including lime terrace, ceiling Sqm
plaster etc. including removal of broken slabs.

BSR_B13 [313]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
13.19 Making holes in stone masonry wall upto 450 mm x 450 mm size and Each
making good in CM 1:6.

13.20 Grinding of existing floor with

13.20.1 60, 80, 120 and 360 No. Carborundum stone including cost of wax Sqm
polishing complete :
13.20.2 120 and 360 No. Carborundum stone including cost of wax polishing Sqm
complete :

13.21 Add extra for mirror polishing on existing marble work/ Kota stone Sqm

flooring work where ever required to give high gloss finish complete.

13.22 Providing and fixing double scaffolding system on the exterior side, Sqm.
upto five story made with 4" wooden member 1.5 m c/c horizontal and
vertical direction joining with rassi, clamps, challies. The scaffolding
system shall be stiffened with bracing, runner, connection of building if
necessary with all essential safty features for the workmen etc complete
as per direction of EI.The lavation area of the scaffolding shall be
measured for payment. The payment will be made once irrespective of
duration of scaffolding.
Note : This item to be used for maintence work judicially

13.23 Repair of existing steel glazed doors, windows and ventilator, MS sheet Sqm.
door, garge doors, compound wall gates etc. by welding drilling
complete include. Cost of welding rods and hire charge of welding
meachine and TP etc complete

13.24 Labour charges for repair to door / window without using any material Sqm.

such as applying randha (finishing) tightening of bolts & screw etc.

13.25 L/C for fixing of GI/AC sheet include. Cutting jhiri and repair , cutting Sqm.
of sheet , fixing of sheet with J or L hook and bitumen washer as per
direction of EI

BSR_B13 [314]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
13.26 Repair of rolling shutter with replacement of shutter spring incl. removal Each

of old spring in the existing rolling shutter incld. Cost of new spring

13.27 Repair of rolling shutter with using any material such as bend repair , Each
tightening of spring,bolt and screw etc complete

13.28 Refebrication work with existing steel work including cutting, welding Kg
& refebrication as per requirement with fixing at site complete as per
direction of Engineer In charge

13.29 Repair to damaged RCC slabs, beams and columns etc for strengthening Sqm
with cement mortar 1 : 2 in following steps :-
(i) Choping losse and cracked concrete to required depth, cleaning the
exposed surface of steel and concrete with wire brush and sand papering
, cleaning of concrete surface with water as necessary and getting dried.
(ii) Applying Epoxy primer on the exposed steel bars.
(iii) Applying Epoxy hardener and resin mix (as per manufectured's

specification) on concrete and steel bars with brush.

(iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface
and allow it to dry for one day.
(v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm
complete.
(vi) Cure the plastered surface for 15 days, All work including scaffolding
etc. complete in all respect.

13.30 Replacement of stone Chajja with sriwan in damaged portion as per Sqm
existing thickness and width in CM 1 : 3 with removal of old damaged
pieces of chajja including top plaster of chajja and bottom pointing in
CM 1 : 3 with scoffolding upto Ground floor level as per direction of
Engineer in charge
13.30.1 Add Extra for each additional floor Sqm

13.31 Repair to damaged cement plaster of stone chajja with CM 1 : 3 of Sqm

required thickness on top & bottom as per existing pattern and making
patta etc complete up to three floor level as per direction of Engineer in
charge including all necessary scoffolding etc

BSR_B13 [315]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

13.32 Mechanised cleaning of storage tanks comprises of following 6 stage as

mentioned below :
(i) Mechanical dewatering
(ii) Desalting removal of leftover dirty water and sludge with sludge pump

(iii) Cleaning of wall, ceiling and floor by high pressure water jet with help

of equipments which creates a pressure of 100-150 bar

(iv) Removal of remaing sludge from floor with the help of industrial vacum
cleaner.

(v) Spraying of non toxic, bio degradable ecofriendly and bacterial agent
certified by a govt approved laborary to disinfect the tank from all
harmfull pathogens. The dose should be safe as per the UECD
guidelines & 23 adopted on 17 th december 2001.
(vi) Treatment of inside tank by exposing UV radiation to kill further
suspended or floating bacteria if any
13.32.1 Upto 500 ltr. Ltr.
13.32.2 Above 500 ltr. to 1000 Ltr. Ltr.
13.32.3 Above 1000 ltr. Ltr.

13.33 Repair of door, window shutters including cost of material and

labour for change of damaged :
(a) Style / rail of teak wood 30mm thick/ Aluminium Section

(i) 4"wide Rmt.

(ii) 6" wide Rmt.

(b) Panel by
(i) Shuttering Ply - 9mm thick (Commercial) Sqm.
(ii) Wire Gauge 14 mesh x 24 gauge Sqm.
(iii) Plain Glass Panes 4mm thick Sqm.

(c) Aldrop of mild Steel

(i) 12" long x12mm dia Each
(ii) 8" long x 10mm dia Each

(d) Stopper of Aluminium with

(i) Single Rubber Gutka Each
(ii) Double Rubber Gutka Each

BSR_B13 [316]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

(e) Door Springs of mild Steel Each

(f) Steel Hinges

(i) For Wooden Chowkhat 3" size. Each
(ii) For Wooden Chowkhat 4" size Each
(iii) For Stone Chowkhat ,4"size Each

(g) Mild Steel Tower Bolt 6" long Each

(h) Steel Locking Bolt Each

(i) Steel Handle 6" size Each

13.34 Making of hole in R.C.C. slab/wall/beams and masonary wall (width up

to 450 mm) by core cutting machine complete as per direction of EI

13.34.1 From diameter 100mm to 150mm Nos
13.34.2 Diameter above 150mm Nos

BSR_B13 [317]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-13
IRS TO BUILDING
Rate (Rs.)
4

235.00

615.00
383.00
271.00

447.00

617.00
763.00

765.00
912.00

636.00
780.00
BSR_B13 [318]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

29.00

18.00

213.00

176.00

215.00

318.00

354.00

288.00
459.00

317.00

1.00

185.00

1844.00

BSR_B13 [319]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
182.00

69.00

43.00

121.00

162.00

332.00

220.00

256.00

BSR_B13 [320]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
866.00

606.00

34.00

1568.00

2820.00

264.00

633.00

BSR_B13 [321]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

0.40
0.35
0.30

266.00
367.00

598.00
534.00
431.00

147.00
106.00

33.00
47.00

BSR_B13 [322]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

160.00

24.00
34.00
29.00

39.00

53.00
24.00

1107.00
1663.00
24680.05

BSR_B13 [323]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-14
DISMANTLING & DEMOLISHING WORK
Note : All items of demolition & dismantling of building shall be conform to

IS 4130 for handling , IS 7969 for storage and IS 3696 for scaffolding

Chapter
Description Unit
Code No
1 2 3

14.1 Demolishing lime concrete manually/ by mechanical means and disposal Cum
of material within 50 metres lead as per direction of Engineer-in-charge.

14.2 Demolishing cement concrete manually/ by mechanical means including

disposal of material within 50 metres lead as per direction of Engineer-
in-charge.
14.2.1 1: 3: 6 or richer mix. Cum
14.2.2 1: 4: 8 or leaner mix. Cum

14.3 Demolishing R.C.C. work manually/ by mechanical means including Cum

stacking of steel bars and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge.

14.4 Demolishing R.B. work manually/ by mechanical means including Cum

stacking of steel bars and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge.

14.5 Extra for cutting reinforcement bars manually/ by mechanical means in Sqm
R.C.C. or R.B. work (Payment shall be made on the cross sectional area
of R.C.C. or R.B. work) as per direction of Engineer-in-charge

14.6 Extra for scrapping, cleaning and straightening reinforcement from Kg

R.C.C. or R.B. work

14.7 Demolishing brick work manually/ by mechanical means including

stacking of serviceable material and disposal of unserviceable material
within 50 metres lead as per direction of Engineer-in-charge.
14.7.1 In mud mortar. Cum
14.7.2 In lime mortar. Cum
BSR_B14 [324]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.7.3 In cement mortar. Cum

14.8 Removing mortar from bricks and cleaning bricks including stacking

within a lead of 50 meters (stacks of cleaned bricks shall be measured):

14.8.1 From bricks work in mud mortar. 1000 Nos.

14.8.2 From brick work in lime mortar 1000 Nos.

14.8.3 From brick work in cement mortar. 1000 Nos.

14.9 Demolishing stone rubble masonry manually/ by mechanical means

including stacking of serviceable material and disposal of unserviceable
material within 50 metres lead as per direction of Engineer-in-charge:
14.9.1 In lime mortar. Cum
14.9.2 In cement mortar. Cum
14.9.3 In mud mortar Cum
14.9.4 dry masonry Cum

14.10 Dismantling dressed stone work ashlar face stone work, marble work or
precast concrete work manually/ by mechanical means including
stacking of serviceable and disposal of unserviceable material within 50
metres lead as per direction of Engineer in charge :
14.10.1 In lime mortar. Cum
14.10.2 In cement mortar. Cum

14.11 Removing mortar from stones and cleaning stones and concrete articles
including stacking (net quantity of stacks of cleaned materials will be
measured):
14.11.1 Lime mortar. Cum
14.11.2 Cement mortar. Cum

14.12 Dismantling doors, windows and clearstory windows steel or wood

shutter including chowkhats and holdfasts etc. complete and stacking
within 50 meters lead:
14.12.1 Of area 3 square meter and below. Each
14.12.2 Of area exceeding 3 square meter. Each

14.13 Taking out doors, windows and clearstory windows shutters (steel or
wood) including stacking within 50 meters lead:

BSR_B14 [325]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.13.1 Of area 3 square meter and below. Each
14.13.2 Of area exceeding 3 square meter. Each

14.14 Dismantling wood work in frames, trusses, purlins and rafters up to

10 meter span and 5m height including, levelling stacking the
material within 50m lead:
14.14.1 Of sectional area 40 Sq.cm and above Cum
14.14.2 Of sectional area below 40 Sq.cm. Mtr.

14.15 Extra for dismantling trusses, rafters, purlins etc. of wood work for

every additional span of one metre or part thereof beyond 10 metres :

14.15.1 of sectional area 40 Sq.cm and above Cum per
Meter span

14.15.2 of sectional area below 40 Sq.cm. Mtr. .Per

meter span

14.16 Extra for dismantling trusses, rafters, purlins etc. of wood work for

every additional height of one metre or part thereof beyond 5 metres :

14.16.1 of sectional area 40 Sq.cm and above Cum per
Meter span

14.16.2 of sectional area below 40 Sq.cm. Mtr. per

Meter span

14.17 Dismantling steel work in single sections including dismembering

and stacking within 50 meters lead in:
14.17.1 R.S. joists. Kg
14.17.2 Channels, angles, tees & flats. Kg

14.18 Dismantling steel work in built up sections in angles, tees, flats and Kg
channels including all gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within 50metres lead.

14.19 Dismantling steel work manually/ by mechanical means in built up Kg

sections without dismembering and stacking within 50 metres lead as
per direction of Engineer-in-charge.

BSR_B14 [326]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.20 Extra for dismantling trusses, rafters, purlins etc. of steel work for every Kg per Mtr.

additional span of one metre or part thereof beyond 10 metres

14.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for every Kg per Mtr.

additional height of one metre or part thereof beyond 5 metres.

14.22 Extra for making of structural steel work required to be re-erected. Kg

14.23 Dismantling tile work in floors and roofs laid in cement mortar
including stacking of serviceable material and disposal of unserviceable
material within 50 meter lead:
14.23.1 For thickness of tiles 10mm to 25mm. Sqm
14.23.2 For thickness of tiles 25mm to 40mm. Sqm

14.24 Dismantling dry brick pitching in floors drains etc. including stacking of Cum
serviceable material and disposal of unserviceable material within 50
meters lead.

14.25 Dismantling stone slab/ terrazo chip flooring laid in cement mortar Sqm
including stacking of serviceable material and disposal of unserviceable
material within 50 meters lead.

14.26 Dismantling brick tiles covering in terracing including stacking of Sqm

serviceable material and disposal of unserviceable material within 50
meters lead.

14.27 Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and Cum
disposal of unserviceable material within 50 meters lead.

14.28 Dismantling roofing including ridges, hips, valleys and rafters etc.
and stacking the within 50 meter lead of:
14.28.1 G.I. Sheet. Sqm
14.28.2 Asbestos Sheet. Sqm

14.29 Dismantling stone slab roofing over wooden karries and battens Cum
(dismantling karries and battens to be paid for separately) including
stacking of serviceable material and disposal of unserviceable material
within 50 meter lead:

BSR_B14 [327]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

14.30 Dismantling Jack arch roofing and floors including stacking of Sqm
serviceable material and disposal of unserviceable material within 50-
meter lead.

14.31 Dismantling tiled roofing with battens boarding etc. complete including Sqm
stacking of serviceable material and disposal of unserviceable material
within 50-meter lead.

14.32 Dismantling thatch roofing including mats bamboos, jafries etc. Sqm
complete including stacking of serviceable material and disposal of
unserviceable material within 50 meter lead

14.33 Dismantling wooden ballies in posts and struts including stacking within Mtr.
50 meters lead.

14.34 Dismantling and stacking within 50 meters lead fencing post, struts,

including earth work dismantling of concrete etc. in the case of:

14.34.1 T or Angle Iron posts Each

14.34.2 R.C.C. posts. Each

14.35 Cutting ballies or wooden posts of fencing at the point of projection Each

above the concrete at ground and stacking the same within 50 meter lead

14.36 Dismantling barbed wire or chain link fencing including bending Kg

making rolls and stacking within 50-meter lead.

14.37 Dismantling wooden trellis work excluding frames but including Sqm

bending, making rolls and stacking within 50 meter lead.

14.38 Dismantling expanded metal or I.R.C. fabric with necessary battens and Sqm
beading including stacking the serviceable material within 50-meter
lead.

BSR_B14 [328]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.39 Dismantling wooden boards in lining of walls and partition excluding

supporting members but including stacking within 50 meter lead:

14.39.1 Up to 10mm thick Sqm

14.39.2 Thickness above 10mm up to 25mm Sqm

14.39.3 Above 25mm thick. Sqm

14.40 Dismantling precast concrete or stone slabs in wall partitions etc.

including stacking within 50 meter lead:
14.40.1 Thickness up to 40mm. Sqm

14.40.2 Thickness 40mm up to 75mm Sqm

14.41 Dismantling CI or asbestos rain water pipe with fitting and clamps
including stacking within 50 meter lead:
14.41.1 Up to 80mm dia pipe. Mtr.
14.41.2 100mm dia pipe. Mtr.
14.41.3 150mm dia pipe. Mtr.

14.42 Dismantling tar felt over roofing complete including stacking of Sqm
serviceable material and disposal of unserviceable material within 50-
meter lead.

14.43 Dismantling GI pipes (external work) including excavation and refilling

trenches after taking out the pipes and including stacking of pipes within
50 meter lead:
14.43.1 15mm to 40mm nominal bore. Mtr.
14.43.2 Above 40mm nominal bore. Mtr.

14.44 Dismantling CI pipes including excavation and refilling trenches after

taking out the pipes, breaking lead caulked joints, melting of lead and
making into block, including stacking of pipes lead at site within 50
meter, of dia:
14.44.1 Up to 150mm dia. Mtr.
14.44.2 Above 150mm dia. up to 300mm dia. Mtr.
14.44.3 Above 300mm dia. Mtr.

BSR_B14 [329]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.45 Dismantling steel cylinder, R.C. pipes etc. including excavation and
refilling trenches after taking out the pipes, breaking lead caulked joints,
melting of lead and making into blocks including stacking of pipes,
within a lead of 50 meter, of dia:
14.45.1 Up to 600mm dia. Mtr.
14.45.2 Above 600 mm dia. Mtr.

14.46 Dismantling asbestos cement pressure pipes including excavation and

refilling trenches after taking out the pipes, and stacking the same within
a lead of 50 meter, of dia:
14.46.1 Up to 150mm. Mtr.
14.46.2 Above 150mm. Mtr.

14.47 Taking out CI cover with frame from stone slab / RCC slab of Each
inspection chambers of various sizes including dismantling of stone slab
/ RCC slab roofing and stacking of useful materials near the site and
disposal of unserviceable materials within 50-meter lead.

14.48 Taking out C.I. cover with frame from stone slab / RCC slab of Each
manholes of various sizes including dismantling of stone slab / RCC
slab roofing and stacking of useful materials near the site and disposal of
unserviceable materials within 50-meter lead.

14.49 Dismantling of RCC spun vent shaft including excavating the cement Each
concrete pit completely, taking out the shaft, refilling the excavated gap
stacking the useful material near the site and disposal of unserviceable
materials within 50 meter lead.

14.50 Dismantling of gully chamber of various sizes including CI grating with Each
frame including stacking of useful materials near the site and disposal of
unserviceable material within 50 meter lead including refilling the gap.

BSR_B14 [330]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

14.51 Dismantling of flushing cistern of any size including stacking of useful Each
materials near the site and disposal of unserviceable material within 50
meter lead.

14.52 Dismantling of CI sluice valve including stacking of useful materials

within a lead of 50 meter:
14.52.1 Up to 150mm dia. Each
14.52.2 Above 150mm dia. Each

14.53 Dismantling of spindle fire hydrant including stacking of useful material Each
within 50 meter lead.

14.54 Dismantling of cement concrete platform along with curtain walls and

base concrete etc. including stacking of useful materials near the site and

disposal of unserviceable materials within 50 metres lead :

14.54.1 Upto 1.44 Sqm Sqm
14.54.2 Above 1.44 Sqm to 2.52 Sqm Sqm
14.54.3 Above 2.52 Sqm to 3.84 Sqm Sqm

14.55 Dismantling old plaster or skirting, raking out joints and cleaning the Sqm
surface for plaster including disposal of rubbish to the dumping ground
within 50 meter lead.

14.56 Dismantling CC jali including cost of making grooves in plaster and Sqm
making good and including disposal of unserviceable surplus material
and stacking of serviceable material with in 50 meters lead as directed
by Engineer-in-charge. .

BSR_B14 [331]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
14.57 Removing aluminium/Gypsum partitions, doors, windows, fixed Sqm
glazing and false ceiling including disposal of unserviceable material
and stacking of serviceable material with in 50 meters lead as directed
by Engineer-in-charge.

14.58 Making of hole (width up to 150 mm) in R.C.C. slab/wall/beams by

power driven drilling machine complete as per direction of EI

14.58.1 upto 150mm thick Each

14.58.2 above 150 mm thick Each

14.59 Dismantling manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable material within
50metres lead as per direction of Engineer-in-charge :
14.59.1 Water bound macadam road (average thickness 250 mm) Sqm
14.59.2 bituminous road (average thickness 300 mm) Sqm

BSR_B14 [332]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-14
G & DEMOLISHING WORK

Rate (Rs.)
4

254.00

637.00
393.00

930.00

832.00

317.00

2.00

185.00
221.00
BSR_B14 [333]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
538.00

1247.00

1467.00

1854.00

303.00
641.00
179.00
153.00

383.00
751.00

128.00
185.00

105.00
144.00

BSR_B14 [334]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
42.00
55.00

1368.00
6.00

167.00

1.00

238.00

1.00

1.00
1.00

2.00

1.00

BSR_B14 [335]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
0.50

0.50

2.00

20.00
34.00

343.00

80.00

34.00

285.00

48.00
23.00

700.00

BSR_B14 [336]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

65.00

54.00

14.00

6.00

72.00

80.00

7.00

10.00

17.00

21.00

BSR_B14 [337]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

17.00

25.00

36.00

77.00

117.00

19.00
19.00
20.00

23.00

41.00
47.00

109.00
147.00
197.00

BSR_B14 [338]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

197.00
497.00

86.00
105.00

187.00

110.00

1271.00

255.00

BSR_B14 [339]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

277.00

99.00
353.00

213.00

311.00
462.00
693.00

15.00

80.00

BSR_B14 [340]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
17.00

176.00
270.00

69.00
134.00
22419.00

BSR_B14 [341]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-15
WATER PROOFING AND EXPANSION JOINT TREATMENT

Chapter
Description
Code No
1 2

WATER PROOFING TREATMENT

15.1 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed
portions of W.C., kitchen and the like consisting of :
(i) Ist course of applying cement slurry @ 4.4 Kg/sum mixed with water proofing compound
conforming to IS 2645 in recommended proportions including rounding off junction of vertical
and horizontal surface.
(ii) IInd course of 20mm cement plaster 1:3 (1 cement: 3 coarse
sand) mixed with water. proofing compound in recommended
proportion including rounding off junction of vertical and
horizontal surface..
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg per sqm. of area.

(iv) IVth course of 400 micron thick PVC sheet .(Overlaps at joints of PVC sheet should be 100

mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

15.2 Providing and Placing in position suitable PVC water stops conforming to IS:12200 for
construction/ expansion joints between two RCC members and fixed to the reinforcement with
binding wire before pouring concrete etc. complete :

15.2.1 Serrated with central bulb (225 mm wide, 8-11 mm wide)

15.2.2 Dumb bell with central bulb (180 mm wide, 8 mm wide)
15.2.3 Kickers (320 mm wide, 5 mm thick)

15.3 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying :

(i) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound

@0.253 kg//sqm .This layer will be allowed to air cure for 4 hours.

(ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement
compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by
water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all
joints ,corners, junction with polymer mixed slurry.

BSR_B15 [342]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.4 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry

mixed with water proofing cement compound consisting of applying :

(i) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water
proofing cement compound @ 0.253 kg/sqm.
(ii) laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints
of fiber cloth should not be less than 10 cm .
(iii) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with
water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will
be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment
will be taken upto 30cm on parapet wall and tucked into groove in parapet all around
(iv) fourth and final layer of brick tiling ‘with cement mortar or any other approved protective

coarse. (which will be paid for separately) For the purpose of measurement the entire treated

surface will be measured

15.5 Providing and laying four courses water proofing treatment with bitumen felt over roofs

consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702

applied hot 1.45Kg. per square meter of area for each course, second course of roofing felt type

3 grade –I (Hessian based self finished bitumen felt )and fourth and final course of stone grit

6mm and down size of pea sized gravel spread at 6cubes diameter per square meter including

preparation of surface, but excluding grading, complete with Bitumen felt (Hessian base)

type 3 grade - I conforming to : 1322.

15.6 Providing and laying six courses water proofing treatment with bitumen felt over roofs

consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS :

702 applied hot @ @ 1.45 ,1.20 and 1.45 Kg per sqm. of area respectively second and fourth

courses of roofing felt type 3 grade-I conforming to IS 1322 (Hessian based self finished

bitumen felt) conforming to IS 1322 and sixth and final course of stone grit 6mm and down size

of pea sized gravel spread at 6 cubic dm. per square metre including preparation of surface but

excluding grading complete .

BSR_B15 [343]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.7 Providing and laying six courses water proofing treatment with bitumen felt over roofs
consisting of first, third and fifth courses of blown or/and residual bitumen applied hot at 1.45,
1.20 and 1.70 Kg. per Sqm. of area respectively second and fourth courses of roofing felt type 2
grade-I (fiber base self finished bitumen felt) and sixth and final course of stone grit 6mm and
down size or pea sized gravel spread at 8cu.dm per sqm including preparation of surface
excluding grading complete confirming to IS : 1322 and 1346.

15.8 Providing and laying six courses water proofing treatment with bitumen felt over roofs

consisting of first, third and fifth courses of blown or/and residual bitumen applied hot at 1.45,

1.20 and 1.70Kg. per Sqm of area respectively second and fourth courses of roofing felt type 2

grade 2 (fiber base self finished bitumen felt) and sixth and final course of stone grit 6mm and

down size of pea sized gravel spread at 8cu.dm per sqm including preparation of surface

excluding grading complete confirming to IS : 1322 and 1346.

15.9 Supplying and applying bituminous solution primer on roofs or on wall surface at 0.24 litre per
sqm.

15.10 Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm. and
down size of pea sized gravel :
15.10.1 At 6dm3 per Sqm.
15.10.2 At 8dm3 per Sqm.

15.11 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer
3mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting
of a coat of bitumen primer for bitumen membrane @ 0.40 Itr/sq.mt. by the same membrane
manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the primer coat
the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing
the surface complete. The vital physical and chemical parameters of the membrane shall be as
under Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear
strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not
less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D-
5147. The laying of membrane shall be got done through the authorized applicator of the
manufacturer of membrane.
3 mm thick

BSR_B15 [344]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.12 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer
3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt
consisting of a coat of bitumen primer for bitumen membran @ 0.40 Itr/sq.mt. by the same
membrane manufacture of density at 25°C, 0.87-0.89 kg/ltr and viscosity 70-160 cps. Over the
primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc.,
and preparing the surface complete. The vital physical and chemical parameters of the
membrane shall be as under Joint strength in longitudinal and transverse direction at 23°C as
650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening
point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in
accordance with ASTM, D-5147. The laying of membrane shall be got done through the
authorized applicator of the manufacturer of membrane.
3 mm thick

15.13 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100% polyester of
thickness 1 to 1.25mm bonded to the membrane with intermittent touch by heating the
membrane by Butane Torch as per manufactures recommendation.

15.14 Extra over items of Cement Plaster / Cement Concrete flooring / Plain or RCC work Providing
and mixing admixture of synthetic Fiber 6mm / 12mm. @ rate of 125gm. pack per 50 Kg. of
Cement or in the ratio of as specified by manufacture specification and direction of Engineer In-
charges with all leads and lifts.

EXPANSION JOINT TREATMENT:

15.15 Supplying and providing of two components poly sulphide sealant containing solid contents,

confirming to standard specification and approved compatible primer, for priming vertical faces

prior to application of poly sulphide sealant including all labour charges for sealing of

expansion joints after drill mixing of two components sealing compound. Cleaning and

preparation of expansion joint using wire brush sand papering with emery paper and filing with

suitable mechanical means. The work includes racking and cleaning of joints, sticking,

debonding tape on bottom of joint, applying primer on edges, using masking tape on edges,

providing of sealant and removal of masking tape immediately after providing sealant in joint.

15.15.1 To vertical joint between RCC columns, bricks & stone masonry in size 40 mm width and 12

mm depth, including providing back up material (Thermocol foam) if required.

BSR_B15 [345]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.15.2 To joints in flooring, as per drawing with first layer of poly sulphide sealant in size 20 mm
width and 10 mm depth over PE Foam and then providing polyethylene foam back up rod 25
mm dia size and finally providing another layer of poly sulphide sealant in size 20 mm width
and 10 mm depth over P.E. back up rod as per application procedure and direction of Engineer-
in-charge.

15.16 Providing and fixing in position bitumen impregnated fiberboard confirming to IS: 1838 in
expansion joints including the cost of primer sealing compound.
15.16.1 12 mm. thick
15.16.2 18 mm. thick
15.16.3 25 mm. thick

15.17 Providing and fixing expansion joint board for building RCC column beams, walls, slab of
Polyethylene foam of density 30 to 35 Kg/m3 of Armour Board.
15.17.1 20mm Thick
15.17.2 25 mm Thick
15.17.3 30 mm Thick
15.17.4 40 mm Thick
15.17.5 50 mm Thick

15.18 Providing and fixing 150 mm wide sheet covering over expansion joints with iron screws as per
design to match the colour / shade of wall treatment.
15.18.1 Non-asbestos fibre cement board 6 mm thick as per IS:14862. 1
15.18.2 Aluminum fluted strips 2 mm thick
15.18.3 Acrylic sheet 5 mm thick

15.19 Providing and filling in position bitumen sealing compound grade A (IS 1834 ) in

expansion joints.

15.20 Providing and filling in position bitumen mix filler of proportion 80 Kg. of hot bitumen, 1 Kg.

of cement and 0.25 cubic meter of coarse sand for expansion joints.

R.C.C. FRAMES

15.21 Providing and fixing in cement sand mortar 1 : 3 single/double rebated R..C. Door Window and
ventilator frames (Chowkhats) including 1% reinforcement as per design and concrete mix 1 : 2
: 4 cutting etc. complete incl. horns. and hold fasts :
15.21.1 Size 75 x 50mm
15.21.2 Size 75 x 75mm
15.21.3 Size 100 x 75mm
15.21.4 Size 125 x 75mm

15.22 Extra for RC frames (Chowkhats) Curved in plan

15.23 Extra for RCC frame finishing the exposed face with terrazo (Mosaic) finish.

BSR_B15 [346]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2

CUT STONE DOOR AND WINDOW FRAMES

15.24 Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows
and ventilator frames of approved quarry :

15.24.1 Size 75 x 60mm

15.24.2 Size 75 x 75mm
15.24.3 Size 100 x 60mm
15.24.4 Size 100x 75mm
15.24.5 Size 125 x 100mm

15.25 Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator

frames of approved quarry:

15.25.1 Size 100 x 75mm.

15.25.2 Size 125 x 100mm

15.26 Providing & mixing admixture in Cement Concrete flooring/Cement Plaster/Plain or RCC

work, Synthetic Polyster Triangular Construction Fiber of length 6mm/12mm/18mm with

specific gravity 1.34 to 1.40 and diameter 10-40 microns and melting point>220 degrres

centigrade by using 125 gm fiber for 50 kgs cement used as per direction of Engineer-in-charge

as per IS Code : 16481-2016

15.27 Providing & mixing admixture in Cement Mass Concrete flooring CC Road, RCC work, Canal

Lining and Shotcrete Non Circular with ribbed surface Structural Synthetic Macro Fiber 42-

50mm length, specific gravity of > 1.30 and diameter 0.8 - 1.20mm and melting poing > 220

degree centigrade @ 0.75% -100% by cement weight in mix as per direction of Engineer-in-

charge.

15.28 Nano technology water proofing, thermal insulation protection coating :

BSR_B15 [347]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.28.1 Nano technology water proofing, thermal insulation protection coating 12 layer process for
increasing life of building and damage control for roof.-- before coating scaling, cleaning, and
preparing surface for treatment. Opening all joint and cracks and filling them with nano
technology crack filling hydrophobic chemical with 2/3 coats. then after drying doing a PCC
coat on cracks. One coat of nano technology hydrophobic/oiliophobic primer. Nano technology
water proofing treatment in3 coats non silicon based applied with fiber mesh sheets in medium.
Nano technology thermal insulation coating highly elasticity in nature with 3 coats with 1000
micron width.2top coats of anti stain, anti slippery, natural transparent high shine chemical for
better life of the treatment.

15.28.2 Nano technology water proofing, thermal insulation protection coating 9 layer process for
increasing life of building and damage control protection for walls.-- before coating scaling,
cleaning, and preparing surface for treatment. Opening all joint and cracks and filling them with
nano technology crack filling hydrophobic chemical with 2 coats. then after drying doing a
PCC coat on cracks. One coat of nano technology hydrophobic/oiliophobic primer. Nano
technology water proofing treatment in 2 coats non silicon based thermal insulation coating
highly elasticity in nature with 2 coats with 1000 micron thickness 2 top coats of anti slippery,
natural transparent high shine chemical for better life of the treatment.

15.28.3 Nano technology water proofing or anti stain protection coating 5-7 layer process for increasing
life of all stone fascia/facades/flooring or stone building and damage control protection, life 7-9
years, warranty 5 years-- before coating washing of stone and degreasing of that area is done 1
coat. (Removing of algae/moss/blackness/stains/rust etc. is extra) then after drying doing 1 coat
of Nono technology hydrophobic prime. After this on dry area Nano technology water proofing
treatment in 3 coats wet on wet. In case of anti stain treatment 2 top coats of anti stain, anti
slippery, natural transparent high shine or matt chemical treatment is done.

15.29 Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over
roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification:
Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness
coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the
coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/
litre of chemical. painted surface does not require any external water curing since chemical will
hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic
emulsion polymer water proofing compound having solar heat reduction properties coating @
0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair
before the waterproofing work.

BSR_B15 [348]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.30 Providing & applying one coat of UV resistant polymer cement based waterproofing slurry
coating of approved make and quality on concrete or plastered surface as per specifications
including preparation of surface by cleaning brushing and dust removing, filling of cracks and
making the surface leak proof by mixing one part of chemical with 2 parts of cement and 2
parts of water (covering area 1.86 Sq.M/Kg of chemical) including cost of cement, labour, tools
& plant, scaffolding if necessary etc., complete as directed by Engineer in Charge.
Note: Undulations/cracks found on the surface should be rectified with Cement Motor before
application and the same will be paid under relavent items.

15.31 Providing & applying Three coat of Acrylic Water Proof membrane having sunlight and UV
resistant properties over waterproofing slurry coat , initial coat of 50-75 micron thickness with
diluting 1 part of chemical with 2 parts of clean water, over which applying 2 coats at 2
Hrs .intervals each with diluting 1 part of chemical with 20% of clean water for total thickness
of 400 to 450 microns (covering area 0.9 Sq.M/Kg of chemical including preparation of surface
by cleaning, brushing and dust removing, scaffolding if necessary etc., with contractor's labour,
tools, machinery etc, complete as directed by Engineer in Charge.

15.32 Providing & applying Three coat of pure Acrylic Water based elastomeric brush applied

insulating coating on exterior surface overwaterproofing slurry coat , initial coat of 50-75

micron thickness with diluting 1 part of chemical with 2 parts of clean water, over which

applying 2 coats at 2 Hrs, intervals each with diluting 1 part of chemical with 10% of clean

water for total thickness of 400 to 450 microns (covering area 0.9 Sq.M/Kg of chemical)

including preparation of surface by cleaning, brushing and dust removing, scaffolding if

necessary etc., with contractor's labour, tools, machinery etc, complete as directed by Engineer

in Charge.

BSR_B15 [349]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description
Code No
1 2
15.33 Providing and fixing 50mm thick extruded polystyrene rigid insulation board of required size

between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI having

thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346),

compressive strength of >350 kPa listed as per ASTM D 1621, density of 34-36 kg/m3 as per

ASTM D 1622, water absorptions =< 1% by volume as per ASTM D 2842, oxygen index of

24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576.

Fire retardent property as per DIN 4102, part 1 of class B2 and as per ASTm E84 class A, fixed

with suitable water based adhesive and fastener, complete in all respect as per the diretion of

Engineer-in-Charge.

15.34 Providing & fixing 50mm extruded polystyrene (XPS) insulation board density 36kg/m3,

under or over RCC roof slab complete as per manufacturing specifications fixed with 1%

suitable water based adhesive and fastener, complete in all respect as per the direction of

Engineer-in-Charge.

15.35 Supply and Application of Solar IR Heat Reflective Coating System conforming to BIS Std IS
17218:2019 for concrete surface having minor leakage by thorough surface preparation to
remove dust, dirt, molds etc. using High Pressure WaterJet / Wire Brush etc, opening of cracks
and filling with elastomeric crack filler, then applying one absorption coat of UV resI tan1
elastomeric coating having min. 50% solids (i.e. Thermacool WP 51/or Equivalent), followed
by application of "elastomeric clear coating White Cement" waterproofing coat having min.
400% elongation and tensile strength of 2.2 MPa and than top coating with 2 Coats of Solar lR
Heat Reflective Coating conforming to BIS Standard IS 17218:2019 (i.e. Therrnacool 0.3C/or
Equivalent) of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 wat,
dft 100- 120microns.The work shall be done as per the directions of Engineer-in-charges.water
based pure acrylic, UV resistant, Solar lR Heat Reflective coating with Pull off Adhesion 2.8
Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces,
white colour, matt, surface coverage 3.25 sqm/Ltr/2 wat, dft 100- 120microns.The work shall
be done as per the directions of Engineer-in-charges.

BSR_B15 [350]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-15
AND EXPANSION JOINT TREATMENT

Unit Rate (Rs.)

3 4

Sqm. 513.00

Rm 496.00
Rm 460.00
Rm 472.00

Sqm. 275.00

BSR_B15 [351]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm. 372.00

Sqm. 354.00

Sqm. 548.00

BSR_B15 [352]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm. 595.00

Sqm. 595.00

Sqm. 23.00

Sqm. 10.00
Sqm. 12.00

Sqm. 413.00

BSR_B15 [353]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm. 474.00

Sqm. 56.00

P Pack 57.00
125 gm

Mtr. 828.00

BSR_B15 [354]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Mtr. 865.00

Sqm. 605.00
Sqm. 792.00
Sqm. 1034.00

Sqm. 416.00
Sqm. 493.00
Sqm. 563.00
Sqm. 717.00
Sqm. 837.00

Rm. 116.00
Rm. 409.00
Rm. 110.00

P.Cm. depth P.
Cm. Width for 713.00
100mtr. length

Per cm width 223.00

per cm depth
per 100 mtr.
length

Mtr. 129.00
Mtr. 146.00
Mtr. 154.00
Mtr. 165.00

Mtr. 10%

Mtr. 20%

BSR_B15 [355]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4

Mtr. 190.00
Mtr. 202.00
Mtr. 232.00
Mtr. 271.00
Mtr. 288.00

Mtr. 260.00
Mtr. 315.00

Kg 444.00

Kg 581.00

BSR_B15 [356]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm 1162.00

Sqm 829.00

Sqm 893.00

Sqm 526.00

BSR_B15 [357]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm 244.00

Sqm 486.00

Sqm 522.00

BSR_B15 [358]
 (Integrated Building BSR 2022 Rajasthan)

Unit Rate (Rs.)

3 4
Sqm 659.00

Sqm 662.00

Sqm 580.00

24386.30

BSR_B15 [359]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-16
ALUMINIUM & P.V.C. WORK
Chapter
Description Unit
Code No
1 2 3

16.1 Providing and fixing aluminum work for doors ,windows, ventilators
and partition with extruded built up standard tubular / appropriate Z
sections and other sections of approved make conforming to IS :733 and
IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with
expansion hold fasteners including necessary filling up of gap. at
junctions , at top ,bottom and sides with required PVC/neoprene felt etc.
Aluminium section shall be smooth ,rust free, straight ,mitered and
jointed mechanically wherever required including cleat angle
Aluminium snap beading for glazing /paneling , C.P. brass/ stainless
steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete
as per architectural drawings and the directions of Engineer- in – charge
.(Glazing and paneling to be paid for separately).
16.1.1 For fixed portion
16.1.1.1 Anodised aluminum (anodised transparent 81 dyed to required shade Kg.
according to IS : 1868. (Minimum anodic coating of grade AC 15,
Anodizing to be got done from approved Anodizer)
16.1.1.2 Powder coating aluminum ( minimum thickness of powder coating 50 Kg.
micron)
16.1.1.3 Polyester Powder coating aluminum ( minimum thickness of powder Kg.
coating 50 micron)

16.1.2 For shutters builtup standard tubular sections of openable

doors ,windows & ventilators including providing & fixing hinges /

rollers etc. and making provision for fixing of fittings wherever

required (lockes shall be paid for separately).

16.1.2.1 Anodised aluminum (anodised transparent 81 dyed to required shade Kg.
according to IS : 1868. (Minimum anodic coating of grade AC 15,
Anodizing to be got done from approved Anodizer)
16.1.2.2 Powder coating aluminum ( minimum thickness of powder coating 50 Kg.
micron)

BSR_B16 [360]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.1.2.3 Polyester Powder coating aluminum ( minimum thickness of powder Kg.
coating 50 micron)

16.2 Extra for shutters of sliding aluminum windows

16.3 Extra for work done in curved / circular shape.

16.4 Providing and fixing 12 mm thick prelaminated three layer medium

density (exterior grade ) particle board Grade I, Type II conforming to
IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and
manufacture in paneling fixed in aluminium doors ,windows shutters
and partition frames with C.P. brass / stainless steel screws etc. complete
as per architectural drawings and direction of engineer-in-charge.
16.4.1 Pre-laminated particle board with decorative lamination on one side Sqm
and balancing lamination on other side.
16.4.2 Prelaminated particle board with decorative lamination on both sides. Sqm

16.5 Providing and fixing glazing in aluminium door, window ,ventilator

shutters and partitions etc. with PVS / neoprene gasket etc. complete as

per the architectural drawings and the directions of engineer-in-charge.

(Cost of aluminium snap beading shall be paid in basic item.)

16.5.1 With glass panes of 4.0 mm thickness ( weight not less than 10.0 Sqm
kg/sqm) as per IS : 2835.
16.5.2 With float glass panes of 5.0 mm thickness ( weight not less than 13.50 Sqm
kg/sqm)
16.5.3 With float glass panes of 8 mm thickness Sqm

16.6 Providing and fixing double action hydraulic floor spring of approved
brand and manufacture IS : 6315 marked, for doors including cost of
cutting floors as required, embedding in floors and cover plates with
brass pivot and single piece M.S.
16.6.1 With stainless steel cover plate Each
16.6.2 With brass cover plate Each

BSR_B16 [361]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.7 Filling the gap upto 5 mm depth and 5 mm width in between aluminium Rm
frame & adjacent RCC/ Brick/ Stone work by providing weather silicon
sealant over backer rod of approved quality as per architectural drawings
and direction of Engineer-in-charge complete.

16.8 Providing and fixing 100mm brass locks (best make of approved quality) for Each

aluminium doors including necessary cutting and making good etc. complete.

16.9 Providing and fixing aluminium U shape handle of size 100mm with SS

screws etc. Complete as per direction of Engineer-in-charge

16.9.1 Anodized (AC 15 ) aluminium Each
16.9.2 Powder coated minimum thickness 50 micron aluminium Each
16.9.3 Polyester powder coated minimum thickness 50 micron aluminium . Each

16.10 Providing and fixing expanded grill made of aluminum as per design and

drawing having members section of size 7.5mm x 6.0mm and opening of size

102mm x 99mm to aluminum window/vent with required screws, Y and H

aluminium section (as per drawing) at the ends and middle joints respectively

complete in all respect as per direction of engineer in charge.

16.10.1 Anodised aluminum (anodised transparent 81 dyed to required shade Sqm.
according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing
to be got done from approved Anodizer)
16.10.2 Powder coating aluminum ( minimum thickness of powder coating 50 Sqm.
micron)
16.10.3 Polyester Powder coating aluminum ( minimum thickness of powder coating Sqm.
50 micron)

16.11 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the Sqm
aluminium window by Aluminium beading 20x3mm with suitable screws not
exceeding 150mm distance at all heights with all lead and lift with scafolding.

BSR_B16 [362]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.12 Providing and fixing vertical Blinds, headrail shall be oriented aluminum alloy 50 mm Sqm
wide x 18 mm high the thickness shall be 1.2 mm. Control unit shall be made of high
grade polymer and shall be housed in side the headrail, which shall transfer motion
from chain tilter to tilt rod. Chain tilter shall be made of plastic bead of diameter 4.5
mm through which 2 mm thick polyester code passes. Tilt rod shall be extruded
aluminum having 3 key ways. Runner shall be moulded plastic and shall have to
plastic wheels mounted on plastic axles to enable runner to slide unhindered in
headrail. Luver shall be made of fabric 100 mm colour fast and shall have protective
scotchgard coating to resist stains and dust. Bottom mechanism consist bottom weight
made of powder coated galvanized steel for maximum corrosion resistance. The
bottom weight shall be attached with bottom.

16.13 Providing and fixing Horizontal blinds /Venation blind shall be cold Sqm
rolled formed U shape 23 mm high x 25 mm wide with flanged edges. It
shall be made of heavy gaze 0.56 mm galvanized steel, Slates shall be
made of virgin Al. alloy (having 3.5 – 4.5% of Mg. Content of width 25
mm. The slat shall have dust guard paint coating, the chord lock shall be
of thick tomized steel and shall be securely attach in the head rail. It
shall provide locking arrangement of the cord. Tilt rod shall be made of
galvanized steel it shall have a D shaped with an average cross section
with diameter of 6 mm to achieve minimum torsional deflection.

16.14 Providing and fixing Drapery rod shall be made of 20 gauge cold rolled Rm
steel strip, which is electrical resistance welded. The section will be
available 25.4 mm diameter the section shall be coated with acid
resistance polymer finish shall made from ABS material in nearest
matching colour of rod. The ring shall be made from ABS material in
nearest matching colour to rod. Brackets made of galvanized steel.

16.15 Providing and fixing sun control film, thickness of film 1 Mil Visible Sqm

Light Transmittance 4-24% & Solar Energy Transmittance 42-51% &

Total solar Energy rejection 37-43%of approved colour and shade ,

complete in all respect , at all level , as directed by engineer- in -charge.

PVC ITEMS

BSR_B16 [363]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.16 Providing and fixing factory made of uPVC Extruded section having an
overall dimension as below (tolerance+/-1mm) with wall thickness
2.0mm+/-0.2mm,corners of the door frame to be mitred and welded of
plastic ,galvanized brackets and stain less steel screws.The hinge side
vertical of the frames reinforced by galvanized M.S.tube of size
19x19mm and 1mm+/-0.1mm wall thickness and 3 nos.stainless steel
hinges fixed to the frame complete as per manufacturers specification
and direction of Engineer-in-charge.
16.16.1 Extruded section profile size 48x40 mm Rm

16.16.2 Extruded section profile size 42x50 mm Rm

16.17 Providing and fixing to existing door frames 24mm thick factory made Sqm
PVC door shutters made of stiles and rails of a uPVC hollow section of
size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging
on both sides.The stiles and rails mitred and joined at the corners by
means of M.S.galvanized/plastic brackets of size 75x220mm having
wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of
the shutter reinforced by inserting galvanized M.S.tube of size
20x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of
‘H’ section,a uPVC hollow section of size 100x24mm and 2mm +/-
0.2mm wall thickness fixed to the shutter stiles by means of plastic/
galvanized M.S.’U’ cleats.The shutter frame fitted with a uPVC multi-
shambered single panel of size not less than 610mm, having overall
thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels
fitted vertically and tie bar at two places by inserting horizontally 6mm
galvanized M.S.rod and fastened with nuts and washers, complete as per
manufacturer’s specification and direction of Engineer-in-charge (For
W.C.and bathroom door shutter).

BSR_B16 [364]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.18 Providing and fixing to existing door frames 30mm thick factory made Sqm
polyvinyl chloride (PVC) door shutter made of stiles and rails of a
uPVC hollow section of size 60x30 mm and wall thickness 2mm +/-
0.2mm with inbuilt decorative moulding edging on one side. The stiles
and rails mitred and joined and the corners by means of
M.S.galvanized/plastic brackets of size 75x220 mm having wall
thickness 1.0mmand stainless steel screws. The stiles of the shutter
reinforced by inserting galvanized M.S.tube of size 25x20 mm and 1mm
+/- 0.1mm wall thickness. The lock rail made up of ‘H’ section, a uPVC
hollow section of size 100x30 mm and 2mm +/- 0.2mm wall thickness
fixed to the shutter stiles by means of plastic/galvanized M.S.tube ‘U’
cleats. The shutter frame filled with a uPVC multi-chambered single
panel of size not less than 610mm,having overall thickness of 20mm and
1mm+/- 0.1mm wall thickness.
The panels filled vertically and tie bar at two places by inserting
horizontally 6mm galvanized M.S.rod and fastened with nuts and
washers.complete as per manufacturer’s specification and direction of
Engineer-in-charge.(For W.C.and bathroom door shutter)

16.19 Providing and fixing factory made P.V.C. door frame of size 50x47mm Rm

with a wall thickness of 5mm, made out of extruded 5mm rigid PVC

foam sheet mitred at corners and joined with 2 Nos. of 150mm long

brackets of 15x15mm M.S. square tube, the vertical door profiles to be

reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber

gasket weather seal to be provided through out the frame. The door

frame to be fixed to the wall using M.S. screws of 65/100mm size

complete as per manufacturers specification and direction of Engineer-

in-Charge.

16.20 Providing and fixing to existing door frames.

BSR_B16 [365]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.20.1 30mm thick factory made solid panel PVC door shutter consisting of Sqm
frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x
19mm for stiles and 15 mm x15mm , top & bottom rails. M.S .frame
shall have a coat of steel primers of approved make and manufacture
M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of
size 30mm thickness, 70mm width out of which 50mm shall be flat and
20mm shall be tapered in 45 degree angle on either side forming stiles;
and 5mm thick, 95mm wide PVC sheet out of which 75 mm shall be flat
and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75 mm shall
be flat and 20mm shall be tapered on both sides to form lock rail. Top
bottom and lock rails shall be provided either side of the panel. 10mm
(5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap
insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be
fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm
(5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and
joined together with solvent cement adhesive. An additional 5mm thick
PVC strip of 20mm width is to be stuck on the interior side of the ‘C
Channel using PVC solvent adhesive etc. complete as per direction of
Engineer-in-charge, manufacture’s specification & drawing.(For
W.C.and bathroom door shutter).

BSR_B16 [366]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.20.2 30mm thick factory made solid both side Pre laminated panel PVC door Sqm
shutter consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19mm x 19mm for stiles and 15x15mm top &
bottom rails. M.S .frame shall have a coat of steel primers of approved
make and manufacture M.S. frame covered with 5mm thick heat
moulded PVC ‘C channel of size 30mm thickness, 70mm width out of
which 50mm shall be flat and 20mm shall be tapered in 45 degree angle
on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out
of which 75mm shall be flat and 20mm shall be tapered on the inner side
to form top and bottom rail and 115mm wide PVC sheet out of which 75
mm shall be flat and 20mm shall be tapered on both sides to form lock
rail. Top bottom and lock rails shall be provided either side of the panel.
10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided
as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC
sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails
with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on
inner side, and joined together with solvent cement adhesive. An
additional 5mm thick PVC strip of 20mm width is to be stuck on the
interior side of the ‘C Channel using PVC solvent adhesive etc.
complete as per direction of Engineer-in-charge, manufacture’s
specification & drawing.(For W.C.and bathroom door shutter).

16.21 Providing and fixing of false ceiling with grid of M.S.tube section of Sqm
size 19mm X 19mm and with a wall thickness of 1mm+/- 0.2mm.The
side pipe and the intermediate pipes is fixed to the roof from the top
with the help of ceiling angles/wire grid shall be covered by the uPVC
profile section of size 6mm X 250mm with wall thickness of 0.80mm
+/- 0.2mm,with the help of self tapping screw of 6mm X 13mm, 6mm X
19mm.Necessary cutouts for electric connections, lighting, air
conditioning etc, shall be provided at required place. The perimeter edge
shall be covered by extruded PVC corner beading section of size 9mm X
28mm or 25mm X30mm with a wall thickness of 1mm+/-0.2mm fixed
by applying cynoacrylic adhesive complete as per manufacturer’s
specification and direction of Engineer-in-charge.

BSR_B16 [367]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.22 Providing and fixing of wall paneling on grid made out of PVC profile Sqm

section of size 21x17mm with a wall thickness of 1.5mm+/-0.2mm,fixed

on the existing wall with wood screw of size 50mm X 8mm with rowel

plug at a spacing of 900mm center.uPVC profile section of size 150mm

X 10mm with a wall thickness of 1.0mm+/-0.2mm to be fixed on the

grid by self tapping screw of size 19mm X 6mm.Necessary cutouts for

electrical connection to be provided at required places. The edge and

periphery, finally to be covered by extruded PVC beading section of size

28mm X 12mm with a wall thickness of 1.0mm+/-0.2mm complete as

per manufacture’s specification and direction of Engineer-in-charge.

BSR_B16 [368]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.23 Supply of “ Computer Table” of Modular nature having all the necessary Each
arrangement for keyboard, CPU, UPS, Printer and wire manager Table
Top : The table top of size 900 x 600mm(WxD) would be made out of
post formed on 25 mm thick particle board with 0.7mm thick Carvica
sheet in half round post formed finish on the front and rear side,
matching color compensating laminate fixed on the bottom side. Other
two sides are edge banded and duly sealed with 1.5 mm thick PVC edge
banding of matching color with high pressure through feed machine.
Keyboard Below the table top the keyboard pull out tray having sliding
arrangement fixed on side supporting legs with 450mm G.I. telescopic
channel. Keyboard of size 750 x 450 made out of 18 mm thick Particle
board laminate with 0.7mm thick laminate sheet having all four sides
Flat edge banded and duly sealed with 1.5 mm thick PVC edge banding
of matching color with high pressure through feed machine. Side
Support :Two supporting side leg of size 600 x 750mm(WxH) made out
of post formed on 18 mm thick particle board with 0.7mm thick Carvica
sheet in half round post formed finish on two sides and other two sides
are edge banded and sealed with 1.5mm thick PVC edge banding of
matching color with high pressure through feed machine.Modesty
Panel :
Made out of 18 mm thick Particle board laminate with 0.7mm thick
laminate sheet of size 900 x 750mm(WxH) having all four sides Flat
edge banded and duly sealed with 1.5 mm thick PVC edge banding of
matching color with high pressure through feed machine.

BSR_B16 [369]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
CPU, UPS & Printer Places
Table having the provision for CPU of size 300 x 600 x
600mm(WxDxH) below the table top on the right side of table adjoining
to this on left side below the table the provision for UPS of size 450 x
600 x 250mm (WxDxH) and above this the provision for the Printer
and stationary having overall dimension of 450 x 600 x
300mm(WxDxH). All this is made out of 18 mm thick Particle board
laminate with 0.7mm thick laminate sheet having all four sides flat edge
banded and duly sealed with 1.5 mm thick PVC edge banding of
matching color with high pressure through feed machine.
All the parts of the table are duly fixed with mini fix dowel system with
each other having matching drilled holes to be made on CNC multi hole
boring machine for proper matching and alignment of the different part
of the table, 4nos. of Self Adjusting level screw of size 45 x 6mm are
provide at the bottom of the both legs for the proper leveling of the
table.

16.24 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particale board with post forming three
drawer pedestal unit one KBT or one CPU trolley. Size 4800 x 1500 x
1200mm single seat in combination

16.25 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particle board with four side edage banding
one drawer and one open able shutter pedestal unit one KBT or one
CPU trolley. Size 6000 x 3000 x 1200mm single seat in combination

16.26 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick MDF board with Membrane three drawer
pedestal unit one KBT or one CPU trolley. Size 4600 x 2100 x 1200mm
single seat in combination

BSR_B16 [370]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.27 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particle board with post formed three
drawer pedestal unit one KBT or one CPU trolley. Size 4500 x 2400 x
1200mm single seat in combination
(Rate of this item is effective from 01.12.2016)

16.28 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick MDF board with Membrane three drawer
pedestal unit one KBT or one CPU trolley. Size 6600 x 3000 x 1200mm
single seat in combination

16.29 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thickparticle board with post formed one drawer
or one open able shutter pedestal unit one KBT or one CPU trolley. Size
4500 x 3000 x 1200mm single seat in combination

16.30 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particle board with post formed three
drawer pedestal unit one KBT or one CPU trolley. Size 3600 x 2400 x
1200mm single seat in combination

16.31 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particle board with four side edage banding
1200mm height storage unit with two drawer one KBT or one CPU
trolley. Size 1500 x 3000 x 1650mm single seat in combination

16.32 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particale board with post formed three
drawer one KBT or one CPU trolley. Size 2100 x 2100 x 1200mm
single seat in combination

16.33 Supply and fixing of Modular work Station with Partition 32mm thick Each
Aluminum top 25 mm thick particle board with post formed legs 18mm
particle board with four side edge banding one KBT or one CPU trolley.
Size 2100 x 2100 x 1200mm single seat in combination

BSR_B16 [371]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.34 Supply and fixing of Modular work Station with Partition 60mm thick Each
Aluminum top 25 mm thick particle board with post formed legs 18mm
particle board with four side edge banding with three drawer one KBT
or one CPU trolley Two 1200mm height storage unit. Size 6000 x 3000
x 1200mm single seat in combination

16.35 Supply and fixing of Modular work Station with Partition 22mm thick Each
Aluminum top 25 mm thick particle board with post formed one drawer
or one open able shutter one KBT or one CPU trolley Two 1200mm
height storage unit. Size 3000 x 2700 x 1200mm single seat in
combination

16.36 Supply and fixing of Modular work Station with Partition 22mm thick Each
Aluminum top 25mm thick particle board with post formed one drawer
or one open able shutter one KBT or one CPU trolley Two 1200mm
height storage unit. Size 2400 x 1200 x 1200mm single seat in
combination

16.37 Supply and fixing of Modular work Station with Partition 60mm thick Each
Aluminum top 25mm thick particle board with post formed one drawer
or one open able shutter one KBT or one CPU trolley Two 1200mm
height storage unit. Size 1200 x 1200 x 1200mm single seat in
combination

BSR_B16 [372]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.38 Supply and fixing of Modular work Station with Partition 22mm thick Each
Aluminum top 25mm thick particle board with post formed one drawer
or one open able shutter one KBT or one CPU trolley Two 1200mm
height storage unit. Size 2400 x 600 x 1200mm single seat in
combination

16.39 Supply and fixing of Modular work Station with Partition 60mm thick Each
Aluminum top 25mm thick particle board with post formed one drawer
or one open able shutter one KBT or one CPU trolley Two 1200mm
height storage unit. Size 1800 x 1800 x 1950mm single seat in
combination

BSR_B16 [373]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.40 Providing and fixing Structural glazing work with toughened glass of Sqm

6mm thick and reflective colour as approved in dark shade like

Blue/Dark Blue etc. with frame work of curtain section 65x60mm

(Weight 1.64 kg/m min.) made of aluminium with chrome plating.

Internal frame work will also be of curtain section 65x60mm of chrome

plated aluminium section with20x20mm aluminium tube section and

structural spacer made of rubber. The aluminium frame work size as per

instruction of Engineer-in-charge and including openable panels with all

necesary sections and fitting.The work include silicon structural

adhesive for complete gripping of glass with framing members and

silicon weather seal sealant to prevent moisture/water through joints.

Glass will be fixed in plumb and with uniform spacing of 10-12mm

wide duly filled with silicon weather seal sealant. The work includes all

labour,scaffolding , structural aluminium work, toughened

glasses,silicon weather seal sealant, silicon structural adhesive structural

spacer, all accessories like handles, peg stays, M-15 grade cement

concrete for fixing holdfast .(Face area of glass shall be measured)

16.41 Supply and fixing of polycrete wall fencing of existing wall, fencing of Sqm
0.9 mtr. Height above the existing wall, main member PVC profile
section of size 125mmx125mmx900mm (c/c 1.67 mtr. length) with a
wall thickness of 2.00mm+0.20mm and Horizontal panel PVC profile
section of size 305mmx20mm (3 nos. 1.6 mtr. length) with wall
thickness 1.00mm + 0.1mm and side edge covered with PVC C-Section
of size 24mm x18mm with a wall thickness of 2.00mm+0.20mm
Horizontal panel reinforced with G.I. section (C-Type) with a wall
thickness of 1.20+0.10mm and horizontal panel having side in main
member groove (vertical pillar 125x125mm) all complete as per design
specification and as direction by Engineer in charge.

BSR_B16 [374]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.42 Providing and fixing of uPVC casement fixed windows or ventilators Sqm
manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made
from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer
wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction,
White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All
the four corners shall be mitered cut & thermal welded so as to form window
frame. Frame shall be milled with drain and air equalizer hole in order to be water
tight and for drainage of accumulated water, if any, to outer side. Fix Mullion
made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be
provided in windows as per the requirement. Frame shall have ‘O’ type EPDM
gasket fitted in in-built groove of frame profile for proper air & sound insulation
of the shutter. Glazing bead of size 34 x 20mm with ‘K’ & ‘O’ type inner and
outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float
glass.All welding joints of frame and shutter shall be cleaned and milled with the
CNC mechanism to provide uniform grooved finish on all visible joints. Hardware
: Installation at Site : Complete window is to be installed on site with 10 x 100mm
fastners with white cap in existing pre-finished wall cut-out cemented to glass
level plane at all height & width and silicon glue is applied to fill up the crevices
between wall and window frame. Complete in all respect as per the drawing and
specifications and direction of engineer-in-charge.

16.43 Providing and fixing expanded grill made of aluminum as per design and
drawing having members section of size 7.5mm x 6.0mm and opening of size
75mmx72mm to aluminum window/vent with required screws, Y and H
aluminium sec (as per drawing) at the ends and middle joints respectively
complete in all respect as per direction of engineer in charge.

16.43.1 Anodised aluminum (anodised transparent 81 dyed to required shade Sqm

according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing
to be got done from approved Anodizer) Anodised aluminum (anodised
transparent 81 dyed to required shade according to IS : 1868. (Minimum
anodic coating of grade AC 15, Anodizing to be got done from approved
Anodizer)

16.43.2 Powder coating aluminum ( minimum thickness of powder coating 50 Sqm

micron)

BSR_B16 [375]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.43.3 Polyester Powder coating aluminum ( minimum thickness of powder Sqm
coating 50 micron)

16.44 Providing and fixing expanded grill made of aluminum as per design
and drawing having members section of size 7.5mm x 6.0mm and
opening of size 50mmx48mm to aluminum window/vent with required
screws, Y and H aluminium section (as per drawing) at the ends and
middle joints respectively complete in all respect as per direction of
engineer in charge.
16.44.1 Anodised aluminum (anodised transparent 81 dyed to required shade Sqm
according to IS : 1868. (Minimum anodic coating of grade AC 15,
Anodizing to be got done from approved Anodizer)

16.44.2 Powder coating aluminum ( minimum thickness of powder coating 50 Sqm

micron)

16.44.3 Polyester Powder coating aluminum ( minimum thickness of powder Sqm

coating 50 micron)

BSR_B16 [376]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.45 Providing and fixing of uPVC Sliding windows: Frame Made from the Sqm
Extruded uPVC Window Profile Section of size 106w x 50h mm having
outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber
construction, White in finish, duly reinforced with 1.2 mm thick GI
section. Frame shall have three track configuration, two for sliding of
window shutter and one for mosquito mesh shutter. Vertical member of
frame which bears the sliding shutter load shall have aluminium
rail/track for smooth sliding of shutter rollers. All the four corners shall
be mitered cut & thermal welded so as to form window frame. Frame
shall be milled with drain and air equalizer hole in order to be water
tight and for drainage of accumulated water, if any, to outer side.
Shutter : The shutter of sliding window shall be made of 39w x 69h mm
Extruded 3 box multi- chamber uPVC Window Profile Section of white
colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with
reinforcement of 1.5mm thick GI section duly mitered cut & thermal
welded at all corners and fitted with uPVC glazing bead of size 22 x 20
mm with inner and outer co-extruded EPDM/TPE-E weather seal
gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter
shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC
Window profile section of white colour having outer wall thickness of
2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI
section duly mitered cut & thermal welded at all corners and fitted with
nylon/polymer mesh and rollers/pully.

BSR_B16 [377]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.46 Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Sqm
Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm
(+/- 0.2mm) and 3 box multi-chamber construction, Laminated (colour) finish, duly
reinforced with 1.2 mm thick GI section. Frame shall have three track configuration,
two for sliding of window shutter and one for mosquito mesh shutter. Vertical member
of frame which bears the sliding shutter load shall have aluminium rail/track for
smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal
welded so as to form window frame. Frame shall be milled with drain and air equalizer
hole in order to be water tight and for drainage of accumulated water, if any, to outer
side.
Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3
box multi- chamber uPVC Window Profile Section of laminated ( colour) having outer
wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI
section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing
bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal
gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be made of
39w x 69h mm Extruded 3 box multi-chamber UPVC Window profile section of
laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm) provided with
reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all
corners and fitted with nylon/polymer mesh and rollers/pully.

BSR_B16 [378]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.47 Providing and fixing of uPVC Sliding windows: Frame Made from the Sqm
Extruded uPVC Window Profile Section of size 106w x 50h mm having
outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber
construction, White in finish, duly reinforced with 1.2 mm thick GI
section. Frame shall have three track configuration, Vertical member of
frame which bears the sliding shutter load shall have aluminium
rail/track for smooth sliding of shutter rollers. All the four corners shall
be mitered cut & thermal welded so as to form window frame. Frame
shall be milled with drain and air equalizer hole in order to be water
tight and for drainage of accumulated water, if any, to outer side.
Shutter : The shutter of sliding window shall be made of 39w x 69h mm
Extruded 3 box multi- chamber uPVC Window Profile Section of white
colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with
reinforcement of 1.5mm thick GI section duly mitered cut & thermal
welded at all corners and fitted with uPVC glazing bead of size 22 x 20
mm with inner and outer co-extruded EPDM/TPE-E weather seal
gaskets alongwith 6mm thick ISI make plain float glass.

BSR_B16 [379]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.48 Providing and fixing of uPVC Sliding windows: Frame Made from the Sqm
Extruded uPVC Window Profile Section of size 106w x 50h mm having
outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber
construction, Laminated (colour) finish, duly reinforced with 1.2 mm
thick GI section. Frame shall have three track configuration, Vertical
member of frame which bears the sliding shutter load shall have
aluminium rail/track for smooth sliding of shutter rollers. All the four
corners shall be mitered cut & thermal welded so as to form window
frame. Frame shall be milled with drain and air equalizer hole in order to
be water tight and for drainage of accumulated water, if any, to outer
side.
Shutter : The shutter of sliding window shall be made of 39w x 69h mm
Extruded 3 box multi- chamber uPVC Window Profile Section of
laminated (colour) having outer wall thickness of 2.5mm (+/- 0.2mm)
provided with reinforcement of 1.5mm thick GI section duly mitered cut
& thermal welded at all corners and fitted with uPVC glazing bead of
size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E
weather seal gaskets alongwith 6mm thick ISI make plain float glass.

16.49 Providing and fixing of UPVC casement openable windows (outward / Sqm
inward): Outer Frame made from the Extruded UPVC Windows profile
section of size 60w X 60h mm having outer wall thickness of 2.5mm
(+/- 0.2mm) and three chamber constuction, White in finish, duly
reinforced with 1.5mm thick GI section. All the four corners shall be
mitered cut & thermal welded so as to form window frame. Frame shall
be milled with drain and air equalizer hole in order to be water tight and
for drainage of accumulated water, if any, to outer side. Fix Mullion
made of 60w X 80h mm UPVC profile section with steel reinforcement
shall be provided in windows having 2 or more openable shutters, as per
the requirement. Frame shall have co-extruded with EPDM/TPE-E
gasket fitted in in-built groove of frame profile for proper air & sound
insulation of the shutter.

Shutter:

BSR_B16 [380]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

The shutter of outward openable window shall be made of size 60w X 74h mm
and shutter of inward openable window shall be made of size 60w x 77h mm
Extruded 3 box multi-chamber UPVC Window profile section of white colour
having outer wall thickness of 2.25mm (+/- 0.2mm) provided with reinforcement
of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and
fitted with UPVC glazing bead of size 36 X 20mm with inner and outer co-
extruded EPDM/TPE-E weather seal gasket alongwith 6mm thick ISI make plain
float glass. All welding joints of frame and shutter shall be cleaned and milled
with the CNC mechainism to provide uniform grooved finish on all visible jaints.
Hardware: Window shutter are fixed with frame on 2.5mm thick SS301 Grade
friction hinge system to keep the window opened at desired angle. Friction Hinge
also enables easy cleaning of glass on both side from the inside of building.
16.50 Providing and fixing of UPVC casement openable windows (outward / inward): Sqm
Outer Frame made from the Extruded UPVC Windows profile section of size 60w
X 60h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and three chamber
constuction in Laminated (colour) finish, duly reinforced with 1.5mm thick GI
section. All the four corners shall be mitered cut & thermal welded so as to form
window frame. Frame shall be milled with drain and air equalizer hole in order to
be water tight and for drainage of accumulated water, if any, to outer side. Fix
Mullion made of 60w X 80h mm UPVC profile section with steel reinforcement
shall be provided in windows having 2 or more openable shutters, as per the
requirement. Frame shall have co-extruded with EPDM/TPE-E gasket fitted in in-
built groove of frame profile for proper air & sound insulation of the shutter.

BSR_B16 [381]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Shutter: The shutter of outward openable window shall be made of size 60w X

74h mm and shutter of inward openable window shall be made of size 60w x 77h

mm Extruded 3 box multi-chamber UPVC Window profile section of

laminated( colour) having outer wall thickness of 2.25mm (+/- 0.2mm) provided

with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded

at all corners and fitted with UPVC glazing bead of size 36 X 20mm with inner

and outer co-extruded EPDM/TPE-E weather seal gasket alongwith 6mm thick ISI

make plain float glass. All welding joints of frame and shutter shall be cleaned and

milled with the CNC mechainism to provide uniform grooved finish on all visible

joints. Hardware: Window shutter are fixed with frame on 2.5mm thick SS301

Grade friction hinge system to keep the window opened at desired angle. Friction

Hinge also enables easy cleaning of glass on both side from the inside of building.

16.51 Providing and fixing of UPVC casement fully (french) open-able windows (outward / Sqm
inward) : Frame made from the Extruded UPVC Windows profile section of size 60w
X 60h mm having outer wall thickness of 2.5 mm (+/- 0.2mm) and 3 box multi-
chamber constuction, White in finish, duly reinforced with 1.5 mm thick G/J/U/O
TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to
form window frame. Frame shall be milled with drain and air equalizer hole in order to
be water tight and for drainage of accumulated water, if any, to outer side. Fix Mullion
made of 60w X 80h mm UPVC profile section with steel reinforcement shall be
provided for the fix portion of the window and for the window area having 2 or more
openable shutters / fix part as per the requirement. Frame shall have co-extruded
EPDM/TPE-E gasket fitted in in-built groove of frame profile for proper air & sound
insulation of the shutter.

Shutter: The shutter of outward openable window shall be made of size 60w X 74h
mm and shutter of inward openable window shall be made of size 60w X 77h mm
Extruded 3 box multi-chamber UPVC Window profile section of white colour having
outer wall thickness of 2.5 mm (+/- 0.2mm) provided with reinforcement of 1.5 mm
thick GI section duly mitered cut & thermal welded at all corners. shutter as well as fix
part of the window shall be fitted with UPVC glazing bead of size 36 X 20 mm with
inner and outer co-extruded EPDM/TPE-E Gasket.

BSR_B16 [382]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.52 Providing and fixing of UPVC casement fully (french)open-able windows Laminated Sqm
Profile ( Colour ) (outward / inward) : Frame made from the Extruded UPVC
Windows profile section of size 60w X 60h mm having outer wall thickness of 2.5 mm
(+/- 0.2mm) and 3 box multi-chamber constuction, Laminated(colour) finish, duly
reinforced with 1.5 mm thick GI section. All the four corners shall be mitered cut &
thermal welded so as to form window frame. Frame shall be milled with drain and air
equalizer hole in order to be water tight and for drainage of accumulated water, if any,
to outer side. Fix Mullion made of 60w X 80h mm UPVC profile section with steel
reinforcement shall be provided for the fix portion of the window and for the window
area having 2 or more openable shutters / fix part as per the requirement. Frame shall
have co-extruded EPDM/TPE-E gasket fitted in in-built groove of frame profile for
proper air & sound insulation of the shutter.

Shutter: The shutter of outward openable

window shall be made of size 60w X 74h mm and shutter of inward openable window
shall be made of size 60w X 77h mm Extruded 3 box multi-chamber UPVC Window
profile section of laminated (colour) having outer wall thickness of 2.5 mm (+/-
0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut &
thermal welded at all corners. shutter as well as fix part of the window shall be fitted
with UPVC glazing bead of size 36 X 20 mm with inner and outer co-extruded
EPDM/TPE-E Gasket.

BSR_B16 [383]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.53 Providing and fixing of openable uPVC Doors with or without fix top: Sqm
Frame Made of Extruded uPVC Window Profile Section of size 60w x
70h mm having outer wall thickness of 2.75mm (+/- 0.2mm) and 3 box
multi-chamber construction, White in finish, duly reinforced with
1.2mm thick GI section. All the corners shall be mitered cut & thermal
welded so as to form door frame. Fix Mullion made of 60w x 80h mm
uPVC Profile Section with steel reinforcement shall be provided for the
top fix portion of the doors or in case of the doors having more than two
openable shutters, as per the requirement / drawing. Frame of openable
door shall have „O‟ type EPDM gasket fitted in in-built groove of frame
profile for proper air & sound insulation of the shutter. Shutter : The
shutters of openable door shall be made of 60w x 95h mm Extruded 3
box multi-chamber uPVC Window Profile Section of white colour
having outer wall thickness of 2.75mm (+/- 0.2mm) provided with
reinforcement of 2.0 mm thick GI section duly mitered cut & thermal
welded at all corners, provided with center mullion (if specified in
drawing) of size 60w x 80h mm uPVC Profile Section and fitted with
uPVC glazing
bead of size 36 x 20mm with inner and outer co-extruded EPDM/TPE-E
weather seal gaskets alongwith 6mm thick ISI make plain float glass.

All welding joints of frame and shutter shall be cleaned and milled with
the CNC mechanism to provide uniform grooved finish on all visible
joints. Hardware: Each openable door shutters is to be fixed with three
load beading butt hinges and locking of doors is to be provided with
multi-point transmission gear (ESPAG) with white finish powder-
coated lockable handle. Installation at site: Complete door is to be
installed on site with 10 X 100mm fastners with white cap in existing
pre-finished wall cut-out cemented to glass level plane at all height &
width and silicon glue is applied to fill up the crevices between wall and
door frame. Complete in all respect as per the drawing and specification
and direction of engineer-in-charge.

BSR_B16 [384]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.54 Providing and fixing of openable uPVC Doors with or without fix top: Sqm
Frame Made of Extruded uPVC Window Profile Section of size 60w x
70h mm having outer wall thickness of 2.75mm (+/- 0.2mm) and 3 box
multi-chamber construction, Laminated (colour) finish, duly reinforced
with 1.2mm thick GI section. All the corners shall be mitered cut &
thermal welded so as to form door frame. Fix Mullion made of 60w x
80h mm uPVC Profile Section with steel reinforcement shall be
provided for the top fix portion of the doors or in case of the doors
having more than two openable shutters, as per the requirement /
drawing. Frame of openable door shall have co-extruded EPDM/TPE-E
gasket fitted in in-built groove of frame profile for proper air & sound
insulation of the shutter. Shutter : The shutters of openable door shall be
made of 60w x 95h mm Extruded 3 box multi-chamber uPVC Window
Profile Section of laminated( colour) having outer wall thickness of
2.75mm (+/- 0.2mm) provided with reinforcement of 2.0 mm thick GI
section duly mitered cut & thermal welded at all corners, provided with
center mullion (if specified in drawing) of size 60w x 80h mm uPVC
Profile Section and fitted with uPVC glazing
bead of size 36 x 20mm with inner and outer co-extruded EPDM/TPE-E
weather seal gaskets alongwith 6mm thick ISI make plain float glass.

BSR_B16 [385]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
All welding joints of frame and shutter shall be cleaned and milled with

the CNC mechanism to provide uniform grooved finish on all visible

joints. Hardware: Each openable door shutters is to be fixed with three

load beading butt hinges and locking of doors is to be provided with

multi-point transmission gear (ESPAG) with white finish powder-

coated lockable handle. Installation at site: Complete door is to be

installed on site with 10 X 100mm fastners with white cap in existing

pre-finished wall cut-out cemented to glass level plane at all height &

width and silicon glue is applied to fill up the crevices between wall and

door frame. Complete in all respect as per the drawing and specification

and direction of engineer-in-charge.

16.55 Providing and Fixing Aluminium composite panel of approved make Sqm
3mm thick with 0.5mm thick skin & PVDF coated approved shade for
wall panelling. Main framing work to be done using
50mmx25mmx1.6mm tubular section of approved make. Stainless steel
screw to be used to fix the ACP panel to be fixed to the main frame with
industrial adhesive tape and panel groove to be sealed with weather
proof silicon sealant suitable for glass/aluminium etc. complete in all
respect as approved by Engineer-in-charge.

16.56 Providing and fixing stainless steel railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and
making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete, i/c fixing the railing
with necessary accessories & stainless steel dash fasteners , stainless
steel bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of Engineer-in-
charge, (for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.).
(a) Grade 304 Kg.
(b) Grade 204 Kg.
BSR_B16 [386]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.57 Supply & Fixing of superior quality wall covering decorative paper of Sqm

composition of paper and synthetic blend and providing material such as

fevicol, cmc powder, chemical and water for fixing the wall paper as per

enclosed photograph and direction Engineer-in Charge.

16.58 Supplying and fixing Rollor Blinds of good quality and approved make Sqm
made out of Imported fabric including Roller Mechanism and lock with
chain system with all necessary hooks etc. complete as per direction and
sample approved by engineer-in-charge.

16.59 Providing & Fixing Aluminium composite panel of indo bond/euro/flexi Sqm
bond of equivalent made 3mm that with 0.5mm thick skin& PVDF
coated of approved shads for toilet door in double layer in Aluminium
frame complete in all respect as per sample approved by Engineer in
Charges.

16.60 Providing & Fixing brass handle 125mm with plate 175x22mm with Nos.

screw complete in all respect as per direction of Engineer in charges.

16.61 Labour Charges for removing and refixing Aluminium Partitions door Sqm

including minor repair on alteration in the same.

16.62 Providing factory made pvc internal door frame of size 100mm x 45mm Rmt
with a wall thickness of 5mm (±0.25), made out of extruded 5mm
(±0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an
ISO-9001-2015 certified Company,and by joining 3nos. heat bent PVC
sheet sections.The inside section of size 90x30mm shall be made from
plain colour PVC sheet of 5mm (±0.25) thickness. The inside section
will be covered by sticking two sections of size 30x35mm and
70x45mm made from 5mm (±0.25) thick plain PVC sheet. The frame
shall be mitre cut at two corners and joined with 4nos. of 150mm long
brackets of 15mm x 15mm M.S. Square tube.

BSR_B16 [387]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
The two vertical door frames are to be reinforced with 40mm x 20mm
M.S. tube of 19 guage through out the frame. The door frame shall be
fixed to the wall using 8/100mm long M.S. Screws through the frame by
using anchor fastners. A minimum of 4nos. of screws to be provided for
each vertical member & minimum 2nos. for horizontal member etc.
complete as per manufactures specification and direction of Engineer-in-
charge.

16.63 Providing Factory Made 100% Solid WPC (Wood polymer Composite) Sqm
Board of 12MM of Single Side Lamination ( 14 Micron ) required
size comprising of virign PVC resin of K Value 58-60 ( Suspemsion
Grade), Calcium Corbonate and natural Fibers ( Wood Powders/ rice
husk/ wheat husk) and Non toxic additives , made from Extrusion
process WPC foam sheet Single Extruded ( Inner) with density not less
than 550 kg/cbm manufactured by an ISO 9001 - 2015 Certified
Company, having good screw holding capacity ( Screw Withrawal
strength of 1800 N ( Face) & 900 N ( Edge), Minimum Compissive
Stength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance
of spread of flam of Class A caegory wih Property of being Termite/
Borer Free.
Water/ Moisture Proof and Fire Retardant and fixinng stainless Steel
butt hinges of required size with necessary full body threaded star
headed counter sunk SS Screws. All as per direction of Engineer -In-
Charge, Material test certificate and authentication should be
compulsory provided by the manufacturing company : For KITCHEN
CABINET & CUPBOARDS..

BSR_B16 [388]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
16.64 Providing Factory Made 100% Solid WPC (Wood polymer Composite) Sqm
Board of 18mm thicknesss of required size comprising of virign PVC
resin of K Value 58-60 ( Suspemsion Grade), Calcium Corbonate and
natural Fibers ( Wood Powders/ rice husk/ wheat husk) and Non toxic
additives , made from Extrusion process WPC foam sheet Single
Extruded ( Inner) with density not less than 550 kg/cbm manufactured
by an ISO 9001 - 2015 Certified Company, having good screw holding
capacity ( Screw Withrawal strength of 1800 N ( Face) & 900 N
( Edge), Minimum Compissive Stength of 58 N/mm2, Modulus of
elasticity 900N/mm2 and resistance of spread of flam of Class A
caegory wih Property of being Termite/ Borer Free.Water/ Moisture
Proof and Fire Retardant and fixinng stainless Steel butt hinges of
required size with necessary full body threaded star headed counter sunk
SS Screws.
All as per direction of Engineer -In-Charge, Material test certificate and
authentication should be compulsory provided by the manufacturing
company : For KITCHEN CABINET & CUPBOARDS..

16.65 Providing & fixing factory made 100% Solid WPC (Wood Polymer Rmt
Composite) Door Frame 90mm x 45 mm ( Moulded ) Single Rebated,,
made from Wood Polymer Composite (Single Extruded Process)
material comparising of virign PVC polymer of K Value 58-60
( Suspemsion Grade), Calcium Corbonate and Natural Fibers ( Wood
Powder/ Rice Husk/ Wheat Husk) and Nor toxic additives fabricated
with meter Joints after applying PVC solvent Cement & screwed with
full body treaded star headed srews having minimum frame density of
780 kg/ cbm & manufactured by an ISO 9001 - 2015 Certified
Company, having good screw holding capacity ( Screw Withrawal
strength of 2200 N ( Face) & 1100 N ( Edge),
Minimum Compissive Stength of 58 N/mm2, Moduus of elasticity
900N/mm2 and resistance to spread of flame of class A category with
property of being termite / borer proof , water / Moisture Proof & Fire
retardant & Fixed in postion with SS Dash Fasterns / Hold Fast of
reuired dia and lenght, all as per specifications drawings as directed by
the Engineer-In-Charge. Material test certificate and authentication
should be compulsory provided by the manufacturing company ( Hold
Fast or Dash Fastners shall be paid seperately)

BSR_B16 [389]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

16.66 Providing and fixing thermal insulation with Resin Bonded rock wool Sqm
conforming to IS:8183, having density 48 kg/m3, 50 mm thick, fixed on
the roof top with screws, rawel plug & washers and held and in position
by criss crossing GI wire etc. complete as per directions of Engineer-in-
charge.

BSR_B16 [390]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-16
IUM & P.V.C. WORK
Rate (Rs.)
4

326.00

351.00

364.00

355.00

381.00

BSR_B16 [391]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
394.00

10%

10%

1030.00

1092.00

791.00

902.00

1235.00

1426.00
1976.00

BSR_B16 [392]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
78.00

328.00

67.00
73.00
75.00

1775.00

1843.00

1977.00

925.00

BSR_B16 [393]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1623.00

1623.00

474.00

639.00

BSR_B16 [394]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

196.00

218.00

1761.00

BSR_B16 [395]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1829.00

277.00

BSR_B16 [396]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
3211.00

BSR_B16 [397]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
3347.00

996.00

BSR_B16 [398]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1394.00

BSR_B16 [399]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
7392.00

BSR_B16 [400]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

15545.00

24651.00

24581.00

BSR_B16 [401]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
22460.00

29930.00

23377.00

17350.00

50149.00

8737.00

14278.00

BSR_B16 [402]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

157190.00

18165.00

14909.00

17562.00

BSR_B16 [403]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
17895.00

62668.00

BSR_B16 [404]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
5381.00

2570.00

BSR_B16 [405]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5128.00

1843.00

1910.00

BSR_B16 [406]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2044.00

1910.00

1977.00

2111.00

BSR_B16 [407]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
8443.00

BSR_B16 [408]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
11570.00

BSR_B16 [409]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
6343.00

BSR_B16 [410]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
9039.00

9118.00

BSR_B16 [411]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

13474.00

BSR_B16 [412]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

11027.00

BSR_B16 [413]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
14272.00

BSR_B16 [414]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
9930.00

BSR_B16 [415]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

13558.00

BSR_B16 [416]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

2594.00

503.00
432.00
BSR_B16 [417]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

450.00

1700.00

929.00

195.00

275.00

500.00

BSR_B16 [418]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1450.00

BSR_B16 [419]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1650.00

550.00

BSR_B16 [420]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

179.00

705246.20

BSR_B16 [421]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : B-17
ADDITIONAL MISCELLANEOUS ITEMS
Chapter
Description Unit
Code No
1 2 3

17.1 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of Sqm
0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated
galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength)
confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250
centre and centre width of 1020mm sheets be casted with regular modified polyster
system on a continuous with line on centre for face and with a polyster coating
respectively sheet shall have proportionality with siphoned plate made to prevent
leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox
head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one
length and for a minimum up to 12mts with all scaffolding.
17.1.1 Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc aluminum Sqm
alloy coated galvalume steel sheet in place of 0.50mm thick
17.1.2 Add extra for 0.80mm TCT (Total Coated Thickness) high tensile Zinc aluminum Sqm
alloy coated galvalume steel sheet in place of 0.50mm thick

17.2 Supply and Installation of ROOF – PREFABRICATED INSULATED PPGL

FACE PANEL:

BSR_17 [422]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Roof: Insulated sandwich panels for roof of total thickness mentioned below exclusive
of crest height of top corrugation. Panel shall be made of 0.50mm (+/-0.04mm) thick
pre coated metal sheet on both sides of rigid polyurethane insulation. The top external
facing metal sheet shall have corrugated shape with crest. The trapezoidal shape
crowns/crest height should not be less than 30mm. The pre-coated metal sheet shall be
PPGL (Pre Painted Galvalume Sheet with AZ coating) sheet having SDP (Super
Durable Polyester) colour coat of 18 micron (min). The bottom sheet must have tongue
and groove type flange (U shape) of 8mm x 8mm on groove side and 8mm x 12mm on
tongue side. Flange must be on lengthwise sides for joining adjacent panels. Panel's
bottom side PPGL sheet must also be pre-strengthened by full lengthwise stiffening
with semi-circular beading of 12mm width & 3 to 4mm depth at 240 (+/-5) mm pitch.
The top corrugated sheet must have at-least one open crown/crest for overlapping
adjacent panel widthwise. Similarly the top corrugated sheet must have suitable open
extension of min 6” on bottom widthwise side of panel for overlapping further panels
joined lengthwise also. The insulation core shall be self-extinguishing DIN 4102,Class
B3 fire retardant class rigid PUR with thermal conductivity of 0.025 W/mK and with
initial density of 40kg/m3 (+/-2kg) suitable for temperature range of -30 degree C to
+80 degree C. The panel must be made using glue-free high pressure hot pressing self-
bonding method. PPGL sheet on both sides of panel shall have a min15 micron
protective plastic guard film to avoid scratches during transportation.
Thickness 65mm (+/- 2mm) Sqm.
Thickness 105mm (+/- 2mm) Sqm.

17.3 Supply and Installation of WALL – PREFABRICATED INSULATED PPGL

PANEL:

BSR_17 [423]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Walls: Insulated sandwich panels for wall of total thickness mentioned below. Panel
shall have 0.50mm (+/-0.04mm) thick pre coated metal sheet on both sides of rigid
PUR insulation. The pre-coated metal sheet shall be PPGL (Pre Painted Galvalume
Sheet with AZ coating) sheet having SDP (Super Durable Polyester) colour coat of 18
micron (min). The panels shall be vertically joined together with adjacent panel by
tongue and groove joints. For joining, wall panel's metal sheet facings must have
lengthwise flange (U shape) of 8mm x 8mm on groove side and 8mmx12mm on
tongue side of panel. The pre-coated metal sheet (PPGL) must also be pre-strengthened
by full lengthwise stiffening with semi-circular beading of 12mm width & 3 to 4mm
depth at 240 (+/-5) mm pitch. Panels may have optional provision for inbuilt electrical
conduit running lengthwise atvertical center of specified panels. The insulation core
shall be self-extinguishing DIN 4102,Class B3 fire retardant class rigid PUR with
thermal conductivity of 0.025 W/mK and with density of 40kg/m3 (+/-2kg) suitable for
temperature range of -30 degree C to +80 degree C. The panel must be made using
glue-free high pressure pressing self-bonding method. PPGL sheet on both sides of
panel shall have a min15 micron protective plastic guard film to avoid scratches during
transportation.
Thickness 55mm (+/- 2mm) Sqm.
Thickness 65mm (+/- 2mm) Sqm.

17.4 Supply and Installation of WALL – PREFABRICATED INSULATED CEMENT

FACE PANEL:
Factory-readymade structural reinforced insulated wall panel of thickness
mentioned below. Panel shall be made of 6mm (+/-0.6mm) thick asbestos-free
fiber cement sheet/ Cement bonded particle board as per IS:14276:1995 on both
sides of rigid PUR insulation. The wall panel shall be vertically joined together
with adjacent panel by biscuit joints lengthwise with suitable construction
adhesive. Joining member (biscuit) shall be made of approx 12mm thick cement
sheet /Cement bonded particle board as per IS:14276:1995. Panels may have
optional provision for inbuilt electrical conduit running lengthwise at vertical
center of specified panels. Both vertical lengthwise sides of panels must have full
length MS tubes of min 1.0mm thickness for better structural strength.The final
panel surface must be free from undulations. The Insulating core shall be self-
extinguishing DIN 4102,Class B3 fire retardant class rigid PUR with thermal
conductivity of 0.025 W/mK and with density of 40kg/m3 (+/-2kg) suitable for
temperature range of -30 degree C to +80 degree C. The panel must be made using
glue-free high pressure hot pressing self-bonding method and shall be free from
major surface undulations.
Thickness 65mm (+/- 2mm) Sqm.
Thickness 75mm (+/- 2mm) Sqm.

BSR_17 [424]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

17.5 Supply and Installation of WALL – PREFABRICATED INSULATED

LAMINATED FACE PANEL:
Factory-readymade interior wall panel of thickness mentioned below. The
panels shall have suitable provision for joining adjacent panels. Interior panels
may have optional provision for inbuilt electrical conduit running lengthwise
at vertical center of specified panels. The insulation core shall be self-
extinguishing DIN 4102,Class B3 fire retardant class rigid PUR with thermal
conductivity of 0.025 W/mK and with density of 40kg/m3 (+/-2kg) suitable
for temperature range of -30 degree C to +80 degree C. The panel must be
made using glue-free high pressure hot pressing self-bonding method and shall
be free from major surface undulations. both sides of panel shall have a min15
micron protective plastic guard film to avoid scratches during transportation.
1. Panel shall be made of min 4mm (+/- 0.5mm) thick laminated wood based
medium density fiber board sheet on both sides of rigid PUR insulation.

Thickness 65mm (+/- 2mm) Sqm.

Thickness 75mm (+/- 2mm) Sqm.

17.6 Supply and Installation of SMALL ROOM (TOILET & GUARD ROOM) –
PREFABRICATED INSULATED PPGL FACE PANEL:
Insulated closed lip panels (for door, wall and roof) of thickness mentioned below.
Panel shall have 0.50mm (+/-0.04mm) thick pre-coated metal sheet on both sides
of rigid PUR insulation. The pre-coated metal sheet shall be PPGL (Pre Painted
Galvalume Sheet with AZ coating) sheet having SDP (Super Durable Polyester)
colour coat of 18 micron(min). The Pre coated metal sheet on both sides must be
pre-strengthened by full lengthwise stiffening with semi-circular beading of 12mm
wide & 3mm depth at 240 (+/-5) mm pitch. Panels shall have closed lengthwise
sides made by right angle flange on both side of Pre coated metal sheets, free from
cap type covers. The top and bottom part on widthwise sides of panels must have
full width MS Square tube insert of (min 25mm x 1.0mm) for better screw
retention and strength. The insulation core shall be self-extinguishing DIN
4102,Class B3 fire retardant class rigid PUR with thermal conductivity of 0.025
W/mK and with density of 40kg/m3 (+/-2kg) suitable for temperature range of -30
degree C to +80 degree C. The panel must be made using glue-free high pressure
hot pressing self-bonding method free from major undulations. PPGL sheet on
both sides of panel shall have a min15 micron protective plastic guard film to
avoid scratches during transportation.
Thickness of 32mm (+/-2mm) Sqm.

BSR_17 [425]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Thickness of 50mm (+/-2mm) Sqm.

17.7 AccessoriesSupply and Installation of (Labour rate included in

main item) Bottom and Top U track :
U-track for mounting panels with floor. The channel shall be made from RMT
minimum 1.15 mm thick PPGL sheet with flange height of minimum 35
mm and width as per thickness of panel used.

17.7.1 Flashings (inner and outer):

Corner angle flashings of equal shape for covering various corners and
open sides of panels. Flashings shall be made from 0.5mm thick pre-
coated PPGL sheet in following sizes:
50mm x 50mm RMT
100mm x 100mm RMT

17.7.2 Roof Ridge Cap:

Ridge flashing for roof panels shall be made from 0.5mm thick pre-
coated PPGL sheet of
200mm x200 mm. RMT

17.7.3 Roof Front Corrugated Cap:

Front side flashing for roof panels (corrugated trapazodial shape) shall RMT

be made from 0.5mm thick pre-coated PPGL sheet.

17.7.4 Roof End Cap:

End cap for closing ends of roof panels made from 0.5mm thick PPGL RMT
sheet.

17.7.5 Frame for Door/Window:

Frame shall be made out of min 1.15mm thick press steel sheet. RMT

17.7.6 Panel End Caps:

U or L shape caps suitable for thickness of panel used, with 30mm RMT

flange. It should be made frem 0.5mm Pre coated PPGL sheet.

17.7.7 Self Drilling Screws:

5” Each
3.5” Each
1” Each

BSR_17 [426]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

17.7.8 Adhesives KG.

17.8 Supply and fixing of Cement Bonded Particle Board (as per IS 14276) Sqm
false ceiling using 6MM thick Cement Board with galvanized and pre
painted steel T section of size 24mm x 27mm x 0.4mm for main T
duty pre punched to accept cross T section of size 24mm x 25mm
x 0.4mm duly punched at both ends for insertion into main T. The grid
size will be 610mm x 610mm. The frame work (grid) is suspended to
the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with
necessary fixers to the roof and frame work. Cement Board panel is
laded on the grid. The cost inclusive of necessary hardware, labor, one
coat of primer (Both side) and two coats of smooth finish on visible
side.

17.9 Supply and fixing of Cement Bonded Particle Board (as per 14276) wall Sqm
paneling using 10 MM thick Cement Board with frame work made of GI
stud section of size 48mm x 35mm x 0.55mm thick placed at every 610
mm C/C intervals vertically and at 1200mm internals horizontally fixed
to the wall by means of self expansion screws and caps. Cement Board
panel is to be fixed to frame by means of self taping screws placed at
every 300 mm intervals leaving 3mm gap between two panels. The cost
inclusive of one coat of Altek primer and two coats of Altek smooth
finish and cost & conveyance of all materials, labor charges etc.
complete as per the direction of Engineer in charge.

BSR_17 [427]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.10 Supply and fixing of Cement Bonded Particle Board (as per 14276) Sqm
double skin partition using with 10 MM thick Cement Board made out
of G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the
roof and floor and stud section of size 48mm x 35mm x 0.55mm
placed in track section vertically at 610mm intervals and at 1200mm
intervals horizontally fixed to the wall by means of self expansion
screws and caps to the wall and roof. Cement Board panel is to be fixed
both sides of frame work by using self taping screws fixed at every
300mm intervals to the frame work leaving 3 mm gap between two
panels. The cost inclusive with one coat of Alltek primer and two coats
of Alltek smooth finish and cost and conveyance of all materials to site,
labor charges etc., complete as per the direction of Engineer in charge.

17.11 Supply and fixing of Factory Laminated Cement Bonded Particle Board Sqm
double skin partition using with 10MM Factory Laminated Cement
Bonded Board made out of G.I track section of size 50 mm x 35mm x
0.55mm for fixing to the roof and floor and stud section of size 48mm x
35mm x 0.55mm placed in track section vertically at 610mm intervals
and at 1200mm internals horizontally. The frame is fixed by means of
self expansion screws and caps to the wall / roof. Laminated Cement
Bonded Particle Board is to be fixed both sides of the frame work by
using 2mm thick electro plated CR flat section leaving 3mm gap
between two panels. The cost inclusive of cost and conveyance of all
materials to sites, other materials incidentals and labor charges as per the
direction of Engineer in charges.

17.12 Supply and fixing of Bath room / Toilet door shutter with 16mm Factory Sqm
Laminated Cement Bonded Particle Board BISON Lam (IS 14276) door
shutter with all-round ‘U’ lipping of PPS section of size 12mm X 18mmX
12mmX0.6mm thickness with a hardware of 12mm dia X200mm long
aluminum aldrop – 2 nos2 No of 125mm long handles and also 3 no Of
IS304 grade Patee Hinges 3mmX12mmX180mm long with pole receiver of
10mm dia pole X40mm long welded on 2mm X40mm(ss304) plates works as
receiver for RT patte hinges. The price inclusive of all material at site.

BSR_17 [428]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

17.13 Solid Rectangular Block (400x200x200, 400x200x100, 400x200x150,

225x200x100)

Providing and fixing up to floor five level of cement concrete solid Cum
blocks (M-20 Grade) of different sizes (Manufactured with fully
mechanised dry cast process with forced action mixer whose arms
revolve along the main axis and rotate about its own axis also, having
humidity sensor for moisture control of w/c ratio in concrete mix.
Manufactured with steel moulds (Milled and manufactured in CSI
diamond or CSI Nitro process for accuracy) on steel base plate of min
16 mm thick; Having Vibration and pressing action both together with
the help of multiple synchronised vibrators. Power of hydraulic station
should be minimum 50KW for compaction and cured in controlled
chambers having humidity control and automated air circulation system)
including hoisting and setting in position with cement mortar 1:3 (1
Cement : 3 Coarse Sand), cost of required centering, shuttering
complete.

17.14 Hollow Rectangular Block (400x200x200, 400x200x100)

Providing and fixing up to floor five level of cement concrete Hollow Cum
Rectangular blocks of different sizes (Manufactured with fully
mechanised dry cast process with forced action mixer whose arms
revolve along the main axis and rotate about its own axis also, having
humidity sensor for moisture control of w/c ratio in concrete mix.
Manufactured with steel moulds (Milled and manufactured in CSI
diamond or CSI Nitro process for accuracy) on steel base plate of min
16 mm thick; Having Vibration and pressing action both together with
the help of multiple synchronised vibrators. Power of hydraulic station
should be minimum 50KW for compaction and cured in controlled
chambers having humidity control and automated air circulation system)
including hoisting and setting in position with cement mortar 1:3 (1
Cement : 3 Coarse Sand), cost of required centering, shuttering
complete.

BSR_17 [429]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.15 Insulated Rectangular Block (400x200x200 mm)
Providing and fixing up to floor five level of cement concrete insulated Cum
blocks of different sizes having a layer of polysterene as insulating
material (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) including hoisting and setting in
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand) including
cost of required centering, shuttering complete.

17.16 Interlocking Paver Blocks having 80 mm thickness in M-40 grade

concrete

BSR_17 [430]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Providing and Laying 80 mm thick cement concrete blocks of M-40 Sqm.
Grade (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds(Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help ofmultiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) spreading 25mm thick sand
underneath and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH Specification
Clause 602.

17.17 Interlocking Paver Blocks having 100 mm thickness in M-50 grade

concrete
Providing and Laying 100 mm thick cement concrete blocks of M-50 Sqm.
Grade(Manufactured with fully mechanised dry cast process with forced
action mixer whose arms revolve along the main axis and rotate about
its own axis also, having humidity sensor for moisture control of w/c
ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) spreading 25mm thick sand
underneath and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH Specification
Clause 602.

BSR_17 [431]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.18 Interlocking Paver Blocks having 120 mm thickness in M-50 grade
concrete
Providing and Laying 120 mm thick cement concrete blocks of M-50 Sqm
Grade(Manufactured with fully mechanised dry cast process with forced
action mixer whose arms revolve along the main axis and rotate about
its own axis also, having humidity sensor for moisture control of w/c
ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy)on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) spreading 25mm thick sand
underneath and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH Specification
Clause 602.

17.19 Interlocking Paver Blocks having 100 mm thickness in M-55 grade

concrete
Providing and Laying 100 mm thick cement concrete blocks of M-55 Sqm
Grade (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy)on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) spreading 25mm thick sand
underneath and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH Specification
Clause 602.

BSR_17 [432]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

17.20 Interlocking Paver Blocks having 120 mm thickness in M-55 grade

concrete
Providing and Laying 120 mm thick cement concrete blocks of M-55 Sqm.
Grade (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) spreading 25mm thick sand
underneath and filling joints with sand on existing W.B.M.base, as per
IS15658:2006 and all materials shall conform to MoRTH Specification
Clause 602.

17.21 Kerb Stones of 1200x300x150, 1000x450x150, 1000x600x150,

600x300x150 size (M-30)

BSR_17 [433]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Providing and Laying cement concrete Kerb Stones of different sizes in Cum
M-30 grade (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) in position to the required line, level
and curvature jointed with cement mortar 1:3 (1 Cement : 3 Coarse
sand) including making of joints, drainage opening wherever required.

17.22 Kerb Stones of 1200x300x150, 1000x400x150, 1000x600x150,

600x300x150 size (M-40)
Providing and Laying cement concrete Kerb Stones of different sizes in Cum
M-40 grade (Manufactured with fully mechanised dry cast process with
forced action mixer whose arms revolve along the main axis and rotate
about its own axis also, having humidity sensor for moisture control of
w/c ratio in concrete mix. Manufactured with steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) in position to the required line, level
and curvature jointed with cement mortar 1:3 (1 Cement : 3 Coarse
sand) including making of joints, drainage opening wherever required.

BSR_17 [434]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.23 Cellular Concrete Block for Pitching and garden paths
(600x400x80) in M-30
Providing and fixing Cellular concrete blocks (M-30 Grade), Sqm.
600x400x80 mm sizes (Manufactured with fully mechanised dry cast
process with forced action mixer whose arms revolve along the main
axis and rotate about its own axis also, having humidity sensor for
moisture control of w/c ratio in concrete mix. Manufactured with steel
moulds (Milled and manufactured in CSI diamond or CSI Nitro process
for accuracy) on steel base plate of min 16 mm thick; Having Vibration
and pressing action both together with the help of multiple synchronised
vibrators. Power of hydraulic station should be minimum 50KW for
compaction and cured in controlled chambers having humidity control
and automated air circulation system) including hoisting and setting in
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand), cost of
required centering, shuttering complete.

17.24 Pre Cast Concrete Flooring (Slab 600x600x100, 1000x650x100)

BSR_17 [435]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Providing and fixing Precast concrete flooring slabs (M-30 Grade) of Sqm.
different sizes(Manufactured with fully mechanised dry cast process
with forced action mixer whose arms revolve along the main axis and
rotate about its own axis also, having humidity sensor for moisture
control of w/c ratio in concrete mix. Manufactured with steel moulds
(Milled and manufactured in CSI diamond or CSI Nitro process for
accuracy) on steel base plate of min 16 mm thick; Having Vibration and
pressing action both together with the help of multiple synchronised
vibrators. Power of hydraulic station should be minimum 50KW for
compaction and cured in controlled chambers having humidity control
and automated air circulation system) including hoisting and setting in
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand), cost of
required centering, shuttering complete and spreading 25mm thick sand
underneath.

17.25 Pre Cast U/Semi circular Drains (Outer size 600x400 mm, wall
thickness 80 mm)
Providing and fixing Precast concreteUdrains (M-30 Grade) of different R.M.
sizes (Manufactured with fully mechanised dry cast process with forced
action mixer whose arms revolve along the main axis and rotate about
its own axis also, having humidity sensor for moisture control of w/c
ratio in concrete mix. Manufactured with Steel moulds (Milled and
manufactured in CSI diamond or CSI Nitro process for accuracy) on
steel base plate of min 16 mm thick; Having Vibration and pressing
action both together with the help of multiple synchronised vibrators.
Power of hydraulic station should be minimum 50KW for compaction
and cured in controlled chambers having humidity control and
automated air circulation system) including hoisting and setting in
position with cement mortar 1:3 (1 Cement : 3 Coarse Sand), cost of
required centering, shuttering complete and spreading 25mm thick sand
underneath.

BSR_17 [436]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.26 Dry Cleaning of sofa sets using shampooing machine with all materials
& drying it do the level using machinery at designated place by
engineer-in-charge one seat of sofa (payment for multi seater sofa will
be done as the number of seats of that sofa.)
17.26.1 Single Seater Sofa Each
17.26.2 Two Seater Sofa Each
17.26.3 Three Seater Sofa Each

17.27 Dry Cleaning of Woolen Carpet of any size using shampooing machine Sqm
with all material & drying it using machinery at the designated place as
told by engineer in charge.

17.28 Complete replacement of Tapestry cloth of Sofa set costing @ Rs. 300/-
per Mtr. Approx of superior quality including stitching charges (As
approved by the Engineer in Charge) as per existing pattern/design.
17.28.1 Single seater sofa Each
17.28.2 Three seater sofa Each

17.29 Complete replacement of damaged foam of Sofa set and using 100mm
thick Joint less P.U. foam in seat of 32 density feather foam of superior
quality of approved make (as approved by the Engineer-in-charge)
pasted with Adhesive (Rubber Solution) of superior quality.
17.29.1 Single seater sofa Each
17.29.2 Three seater sofa Each

17.30 Complete replacement of damaged foam of Sofa set and using 50mm
thick joint less P.U. foam of 32 density feather foam superior quality of
approved make (as approved by the Engineer-in-charge) in back duly
pasted with Adhesive (Rubber Solution) of superior quality.
17.30.1 Single seater sofa Each
17.30.2 Three seater sofa Each

17.31 Complete replacement of damaged foam of Sofa set and using 25mm
thick joint less P.U. foam of 32 density feather foam superior quality of
approved make (as approved by the Engineer-in-charge) in Hand rest,
in seat and back and design work as required of superior quality.
17.31.1 Single seater sofa Each
BSR_17 [437]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.31.2 Three seater sofa Each

17.32 Repair of wooden frame of Sofa set using Tat, Nail, Screw, Bolt (if

required) and re-assembling sofa set (Cost Including all Consumble

Item) complete in all respect as per direction of the Engineer-in-charge

17.32.1 Single seater sofa Each
17.32.2 Three seater sofa Each

17.33 Repair using replacement of Jata, Dori, wooden batten & legs

everything in all respect as per approval of Engineer-in-charge.

17.33.1 Single seater sofa Each
17.33.2 Three seater sofa Each

17.34 Providing and Fixing machine made Synthetic Carpet having total Each
Carpet weight 850 gm Psqm. and 5mm thickness superior quality
complete in all respect as per direction of Engineer-in-charge.

17.35 Providing and Fixing Chiken wire mesh at the joint of masonry Sqm

members/ R.C.C. Members with Nails complete in all respect.

17.36 Providing and fixing in position wall panelling at all heights with Sqm
intergral densified calcium silicate panels/tiles of size 595x595mm,
having NRC (Noise Reduction coefficient) of 0.50 minimum) as per IS
8225:1987, Light reflectance of 85% (minimum). Non combustible as
per BS:476 (part-4), fire performance as per BS:476 (part 6& 7),
Humidity resistance of 100 %, thermal conductivity <0.043 W/m K as
per ASTM 518:1991, comprising of a frame made from especially
fabricated galvanised mild steel sheet 0.50 mm thick pressed section
(galvanizing @120 grams per sqm including both sides)

BSR_17 [438]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
i.e. vertical studs of size 48x34x36 mm are placed at 600mm center to

center in a floor and ceiling channel section of size 50x32m fixed to the

floor and soffit at 600mm centers using 12mm dia, 50mm long wedge

type expanded zinc alloy dash fastner with 10mm bolt.

The joints between the panels are to be duly jointed and finished using
recommended jointing calcium sillcated based compound and fiber joint
tape roll 50mm wide (90 metre) roll and two coats of primer suitable for
panelling as per manufacturer's specification as per direcrtion of
Enginner-in-Charge all complete.

17.37 Providing and Fixing powder coated aluminium angle corners of size 75 Rmt
x 75 x 6mm over extruded/exposed corners of walls/colom etc. fixed
with glazing tape on all four sides including filling of all inside edges of
6mm thickness with weather silicone sealant by backer rod of approved
quality to make it completely air tight and water tight over the surface as
per dirction of Engineer-in-charge.

17.38 Supply & fixing of one side polished black granite/white marble stone Each
14-20mm thick of size 3'x2' with engraved and gold colour painted
letters (upto 500 letters) & borders including soorsagar white stone
pillars of size 0.15x0.15x2.1 Mtr. With moulding, carving & making
slot on pillars for fixing of granite stone including loading & unloading
with all leads & lifts as per direction of Engineer Inchagre.

17.39 Supply & fixing of one side polished black granite/white marble stone Each
14-20mm thick of size 3'x2' with engraved and gold colour painted
letters (upto 500 letters) & borders including dismatalling plaster for
fixing stone and finishing the surface including cost of stone and other
material, carriage, loading, unloading with all leads & lifts as per
direction of Engineer Inchagre.

17.40 Providing and fixing Glass Brick with adhesive in line and length Sqm
complete as per drawing and design and asapproved by Engineer-in-
Charge.

BSR_17 [439]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

17.41 Repairing of High Back, Low Back and Medium Back Revolving
Padded Chair including required all material complete in all respect as
per directin of the Engineer-in-Charge.
17.41.1 Replacing/Adding 25mm thick P.U. Sleep Well Foam of 32 Density in

seat & back as per existing pattern (pasted with Rubber Solution)
(i) Low Back Chair Each
(ii) Medium Back Chair Each
(iii) High Back Chair Each

17.41.2 Replacement/pasting of leatherite seat as per approved sample costing

@ Rs. 300/- per Mtr. (Appx) as approved by the Engineer in Charge.

(i) Low Back Chair Each
(ii) Medium Back Chair Each
(iii) High Back Chair Each

17.41.3 Repair of Chair of NYLON wheel including all material of fixing and Each
labour Charge.

17.41.4 Replacing Bolt/Screw (of existing pattern) in the chair. Each

17.41.5 Repair/Change of Gas lift mechanism use for adjustion purpose with Each
fitting material and labour charges.

17.41.6 Repair/Change of Chrome base plate including all materal of fixing and Each
labour charge.

17.41.7 Repair/ Change of PU handle including all material of fixing and labour Each
charge .

17.42 Repair and polish work of peacock chair/padded chair including

required all material complete in all respect as per direction of the
Engineer in Charge.
17.42.1 Replacing/Adding 25mm thick P.U. sleep well foam of 32 Density in Each

seat & back as per existing pattern (Pasted with Rubber solution)

BSR_17 [440]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.42.2 Replacement of Baniyan foam/tapestry cloth in seat as per approved Each
sample costing @ Rs. 200/- per Mtr. (Appx.) as approved by the
Engineer in Charge.

17.42.3 Replacing linning cloth in bottom of the chair with nail/screw/fevicol Each
etc. of existing type & pattern.

17.42.4 Replacing bolt/screw (of existing pattern) in the chair. Each

17.42.5 Repair of wooden frame of chair including required raw material i.e. Each
replacement of teak wood arms, legs, wooden required including tighting work
as per existing pattern complete in all respect.

17.42.6 Spirit polish on wooden chair with rubbing old surface cleaning and Each
good finishing inlucding cost of polish material.

17.43 Supplying, Filling and stitching of empty cement bags either of plastic or jute Per Bag
with earth avaiable at site of wieght not less than 40 kg including stacking and
removing.

17.44 Supplying and Spreading 25 to 30mm thick layer of Screened approved Per Cum

Samod Bajari of Uniform colour from approved quarry with all lead.

17.45 Labour Charge for providing and fixing 20' long 2" dia G.I. pipe with flags Each
(Flags to be provided by department) in straight line etc. as per direction and
removing all the flags complete before sunset as per direction of Engineer in
charge.

17.46 P/F wall mounted foldable hinged (Grab rail) size 750mm x 100mm (LxW) as Nos
approved design, made of 35mm stainless steel pipe having anti-bacterial
Nylon surface with contour finish for better grip. Grab bar should be mounted
on wall between height 200mm to 250mm from the top of W.C seat and
extending 100mm to 150mm beyond the front of the W.C. Complete in all
respect as per Harmonized guideline & Satisfaction of Engineer-in-Charge.
Cera make (B2210108)

BSR_17 [441]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
17.47 P/f wall mounted inverted L Shaped grab bar with 700mm long bar as Nos
approved design, made of 35mm stainless steel pipe having anti-
bacterial Nylon surface with contour finish for better grip. Grab bar
should be mounted on wall at height of 700mm from the finish floor
level complete in all respect as per Harmonized guidline & Satisfaction
of Engineer-in-Charge. Cera make (B2210103)

17.48 P/F wall mounted 600mm long grab bar as approved design, made of 35mm Nos
stainless stell pipe having anti-bacterial Nylon surface with contour finish for
better grip. Grab bar should be mounted on wall at height of 800mm from the
finish floor level complete in all respect as per Harmonized guidline &
Satification of Engineer-in Charges. Make Cera (B2210106)

17.49 Supply and fixing of solid stainless steel grade 304 C type door handle Nos
of dia 32mm length 600 (outside measurement) having hole dia 14 mm
of with i/c key arrangement.

17.50 Repair to damaged plaster with high performance curing free, quick setting Sqm
cement mortar & confirming to ASTM C 1600 in ratio of 1:4 with following
properties of cement : Compressive strength of 20 MPa within 4 Hours,
Curing free, bond strength of 4 MPa within 24 Hours, Non shrink & Non
toxic in following steps-
(i) Chopping loose and cracked plaster to required depth, cleaning the
exposed surface with wire brush, cleaning of plaster surface with water
as necessary and getting dried.
(ii) Plastering the surface with above mentioned high performance cement

sand mortar 1:4 upto depth of 25 mm complete with all scaffolding.

(iii) No curing has to be done as the high performance cement used should
be curing free.
(This item is to be used in only emergency situation after decided by
Engineer in charge )

17.51 Providing and laying treatment of wear & tear concrete surface with pre- Sqm
mixed, ready to use, geopolymer based mortar & confirming to ASTM C 1600
upto 10 mm thickness with following property –
(i) Curing Free, compressive strength of 15 MPa within 2 hours, Quick Setting,
bond strength of 4 MPa within 24 hours and repaired surface should be ready
to use within 3 hours.

BSR_17 [442]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Note (This item is to be used in only emergency situation after decided by
Engineer in charge )

17.52 Providing and applying treatment of plaster and masonry cracks with Rmt.
pre-mixed, ready to use, geo polymer based mortar & confirming to
ASTM C 1600 upto 15 mm width and 15 mm depth by making V-
Groove with following property –
(i) Curing Free, compressive strength of 15 MPa within 2 hours, Quick
Setting and with bond strength of 4 MPa within 24 hours with all
scaffolding.
Note (This item is to be used in only emergency situation after decided by
Engineer in charge )

BSR_17 [443]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER : B-17
MISCELLANEOUS ITEMS
Rate (Rs.)
4

689.00

15%

45%

BSR_17 [444]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

2521.00
2852.00

BSR_17 [445]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

2320.00
2521.00

2521.00
2651.00

BSR_17 [446]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

2651.00
2781.00

2261.00

BSR_17 [447]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2427.00

220.00

165.00
220.00

220.00

220.00

165.00

220.00

110.00

13.00
10.00
6.00

BSR_17 [448]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

198.00

653.00

1679.00

BSR_17 [449]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2429.00

3401.00

2407.00

BSR_17 [450]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

10307.00

7343.00

BSR_17 [451]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

10912.00

BSR_17 [452]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1210.00

1418.00

BSR_17 [453]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1566.00

1528.00

BSR_17 [454]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1638.00

BSR_17 [455]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
9429.00

9974.00

BSR_17 [456]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

813.00

BSR_17 [457]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
983.00

459.00

BSR_17 [458]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

154.00
232.00
332.00

102.00

1449.00
3941.00

754.00
2113.00

453.00
1289.00

857.00
BSR_17 [459]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1817.00

688.00
2093.00

502.00
755.00

484.00

77.00

2609.00

BSR_17 [460]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1474.00

15110.00

11110.00

4900.00

BSR_17 [461]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

94.00
119.00
135.00

640.00
901.00
1247.00

72.00

15.00

495.00

792.00

495.00

149.00

BSR_17 [462]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
206.00

34.00

15.00

349.00

108.00

7.00

2150.00

260.00

7000.00

BSR_17 [463]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2300.00

1678.00

2860.00

957.00

3184.00

BSR_17 [464]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

195.00

175863.60

BSR_17 [465]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-1
SANITARY INSTALLATION WORK
NOTE: All items which are manufactured ISI marked, shall only be used. this

condition shall be always incorporated in special condition of contract.

Chapter
Description Unit
Code No
1 2 3

WATER CLOSETS
1.1 P. & F Squatting Pan (Indian type) white glazed vitreous china 1st
quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S
trap including cutting and making good the wall and floor (excluding the
pair of foot rest.)
1.1.1 Size 450mm. Each
1.1.2 Size 510 mm Each
1.1.3 Size 580mm Each

1.2 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan

(IS :2556 Mark) with 100 mm vitreous china P or S trap including

cutting and making good the wall and floor:

1.2.1 Size 530x410mm. Each
1.2.2 Size 580x440mm. Each

1.3 P & F European type white glazed vitreous china 1 st quality W.C pan (IS Each
: 2556 Mark) with P or S trap including cutting and making good the
wall and floor

1.4 P & F European type white glazed vitreous china 1st quality Double Each
syphonic W.C (IS :2556 Mark) with P or S trap including cutting and
making good the wall and floor

1.5 P & F Universal (anglo-Indian type) white glazed vitreous china W.C. Each
pan 1st quality (IS 2556 Marked ) with P or S trap including cutting and
making good the wall and floor.

1.6 P & F European type white glazed vitreous china 1st quality W.C. (IS :

2556 Mark) including cutting and making good the wall and floor
1.6.1 Wall Mounting Each
1.6.2 Wall Mounting (extended) Each
1.6.3 Wall Mounting (syphonic) Each

BSR_S1 [466]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

Note :-
(A) Add extra over item No. 1.1 to 1.7, 1.14, 1.15, 1.19, 1.22 ,1.23,1.38 & Each
1.42 for using approved light coloured vitreous china ware i.e.ivory
champagne , perl , soft green , soft blue ,pink, ,light grey etc. instead of
white vitreous chinawares.

(B) Add extra over item No.1.1 to 1.7, 1.14, 1.15, 1.19, 1.22 ,1.23,1.38 & Each
1.42 for using approved dark colored vitreous china ware i.e.Cherry
Red , Dark blue, Jet black, Magenta, Burgandy instead of white vitreous
chinawares.

1.7 P & F water closet Seat Covers with brass hinges complete :
1.7.1 Solid PVC (IS 2548 marked) grade-I Black for EWC. Each
1.7.2 -do- White. Each
1.7.3 -do- Coloured. Each
1.7.4 -do- White. Each
1.7.5 -do- Coloured. Each

1.8 P & F C.P. lugs for toilet seat cover. Pair

1.9 Labour charges for removing W.C. pan (any type) of all sizes with care Each
including all necessary fittings P or S trap.

1.10 P & F White glazed Conversion Bend for W.C. from P trap to S trap. . Each

1.11 P & F vitreous china P trap of approved quality Each

1.12 Add extra if C.I.P trap is used in place of Vitreous china P trap for W.C. Each

1.13 P & F White Vitreous China Double Syphonic European W.C. Each
(I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556
Mark) of 10 litre capacity complete with all necessary internal fittings
including cutting and making good the wall and floor.

URINALS:
1.14 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste
pipe, dome waste couplings, concealed iron brackets or screws etc
complete.

BSR_S1 [467]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.14.1 Flat Back (small) size 456x355x265mm. Each
1.14.2 Flat Back (large) or half stall size 610x400x80mm. Each
1.14.3 Mini stall size 455x385x350mm. Each

1.15 P & F W.V.C. Urinal Partition Plate of approved standard make of size Each

630x315mm including making good the wall.

1.16 P&F Marble Urinal Partition slab both sides polished of approved
design cut from marble size 900x600mm.
1.16.1 Makrana II quality marble having light spots Each
1.16.2 Makrana `Albeta` Marble having light streaks. Each
1.16.3 Makrana `Adanga` or Raj Nagar 1St Quality White or Andhi Indo-Italian Each
marble.

1.17 P & F W.V.C. Half-Round Channel of approved make in C.M.

1:3, joints finished in white cement of:
1.17.1 Size 100mm dia. Mtr.
1.17.2 Size 150mm dia. Mtr.

1.18 P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make

complete. Including cutting & making good the floor:

1.18.1 Size 450x350mm Each

1.19 Labour charges for removing and refixing of urinals (all type & Each
sizes) including all necessary fittings.

1.20 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark)
of approved make with complete fittings C.I. brackets duly painted,
brass ball cock with ball (IS: 1703 mark) complete including cutting and
making good the wall:
1.20.1 WVC with C.P. brass bend. Each
1.20.2 PVC with PVC bend as per IS : 7231 . Each
1.20.3 PVC with PVC bend and superior internal fittings as per IS : 7231 . Each

1.20.4 WVC for symphonic EWC. Each

1.20.5 PVC with CP brass long band as per IS : 7231 . Each

BSR_S1 [468]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.21 P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of
approved make fitting, siphon with copper tube, C.I. brackets complete
including cutting and making good the wall.
WVC (as per IS : 2556) 10 litres. Each
Note :- Deduct if plastic syphon is used. Each

1.22 P & F Flush Pipe of approved make with complete fittings for high level
flushing cistern:
1.22.1 G.I. `B` class (Concealed) 25mm. Each
1.22.2 G.I. `B` class (Concealed) 32 mm. Each
1.22.3 PVC exposed (heavy) 32mm. Each
1.22.4 GI (Sheet) hot galvanized exposed (10 litres). Each

1.23 P & F WVC (10 litres) low-level flushing cistern with cover. Each

1.24 P & F WVC (10 litres) low-level flushing cistern cover only Each

1.25 P & F WVC syphon with plunger plate only. Each

1.26 P & F WVC Auto cistern with cover only. Each

1.27 P & F WVC Auto cistern cover only. Each

1.28 P & F C.P. brass Urinal Flush Pipe set complete with flanged
brackets of approved make.
1.28.1 For 4 Urinals Each
1.28.2 For 3 Urinals Each
1.28.3 For 2 Urinals Each
1.28.4 For 1 Urinal Each

1.29.1 P & F C.P. brass Urinal Spreader for stall urinal of approved make. Each

1.29.2 P & F Synthetic (PTMT) Urinal Spreader for stall urinal of approved Each
make.

1.30.1 P & F C.P. brass Doom Waste Coupling 32 mm dia. Each

1.30.2 P & F C.P. brass Doom Waste Coupling 40 mm dia. Each

1.31 P & F Plastic Syphon of approved make for automatic flush tank. Each

BSR_S1 [469]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.32 P & F Copper tube Syphon for auto flush tank. Each

1.33 Removing and re-fixing of wash hand basin including all necessary Each
fittings.

1.34 P & F metal brackets duly painted including cutting & making good the Pair
wall.

1.35 P & F C.P. Brass flush Valve with C.P. flush bend of approved make.

1.35.1 Lever type with Elbow 32 mm dia Each

1.35.2 Push type with Elbow 32 mm dia Each
1.35.3 Concealed type for 115 mm thick wall Each
1.35.4 Concealed type for 230 mm thick wall Each
1.35.5 Economy model 25 mm dia. Each
1.35.6 Economy model 32 mm dia. Each

WASH BASINS:
1.36 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make
with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934
Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C
Waste pipe with PVC nut 32 mm complete including cutting & making
good the wall :
1.36.1 Size 450 mm x 300 mm Each
1.36.2 Size 510 mm x 400 mm Each
1.36.3 Size 550 mm x 400 mm Each
1.36.4 Size 580 mm x 450 mm Each
1.36.5 Size 610 mm x 510 mm Each
1.36.6 Size 400 mm x 400 mm or 450 mm x 390 mm Corner Each
1.36.7 460 dia for counter top Each
1.36.8 Size 550 mm x 400 mm dia for counter top Each
1.36.9 Size 630 mm x 500 mm dia for counter top Each
1.36.10 Add extra for using 25mm GI waste pipe instead of PVC waste pipe Each

1.37 P & F Terrazzo (Mosaic) wash hand basin with supporting brackets
waste coupling and PVC waste pipe complete, including painting of
brackets making good the walls:
1.37.1 450 mm x 280 mm Each

BSR_S1 [470]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.37.2 550 mm x 400 mm Each

KITCHEN & LAB. SINKS:

1.38 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly
painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug,
40 mm G.I. waste pipe up-to floor level complete including cutting and
making good the wall & floor :
1.38.1 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 x 450 x Each
250mm.
1.38.2 Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 x 450 x Each
200 mm.

1.38.3 WVC Lab sink (IS:2556 mark) size 530 x 430 x 180 mm Each
1.38.4 WVC Lab sink (IS:2556 mark) size 500 x 350 x 150 mm Each
1.38.5 WVC Lab sink (IS:2556 mark) size 450 x 300 x 150 mm Each
1.38.6 Mosaic fine polished kitchen sink size 600 x 450 x 200mm. Each
1.38.7 Mosaic fine polished kitchen sink size 450 x 450 x 200mm. Each
1.38.8 Mosaic fine polished kitchen sink size 600 x 450 x 200 mm with 600 x Each
450mm drain board
1.38.9 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of

approved make as per Engineer-in-charge with large waste coupling.

Overall size Bowl size

(inches) (inches)
1.38.9.1 18 x 16 x 6 16x14x6 Each
1.38.9.2 22 x 18 x 7 20x16x7 Each
1.38.9.3 24 x 18 x 8 20x16x8 Each
1.38.9.4 37 x 18 x 7 17x15x7 (with drain board) Each
1.38.9.5 45 x 20 x 8 20x16x8 (with drain board) Each
Note :- Deduct for item No 1.40.9 for using any other make than specified Each
above.

1.39 P & F Drain Board of approved make with C.I. brackets duly painted

complete including cutting & making good the wall:

1.39.1 WVC (I.S.: 2556 Mark) size 530 x 450mm Each
1.39.2 Mosaic fine polished size 600 x 450 Each

1.40 P & F 1st quality WVC pedestal for wash basin. Each

BSR_S1 [471]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
MISCELLANEOUS
1.41 P & F Bottle Trap of approved make :
1.41.1 C.P Brass 32 mm Each
1.41.2 C.P Brass 40 mm Each
1.41.3 Synthetic Material (PTMT)32 mm Each
1.41.4 Synthetic Material (PTMT)42 mm Each
1.41.5 P.V.C Each

1.42 P& F waste Coulping with fittings of approved quality /make:

1.42.1 C.P Brass 32 mm dia Each
1.42.2 C.P Brass 40 mm dia Each
1.42.3 C.P. Brass 50 mm dia Each
1.42.4 SS 125 mm Each

1.43 P& F waste Pipe with all fitting

1.43.1 P.V.C with C.P nut 32 mm Each
1.43.2 P.V.C with PVC nut 32 mm Each
1.43.3 P.V.C. with C.P. nut 40 mm dia Each
1.43.4 G.I(B class) 32mm Each
1.43.5 G.I(B class) 40 mm Each

1.44 P & F Bevelled edge Mirror/mirror with teak wood lipping around of
special glass of approved make as per direction of Engineer-in-charge
complete with 6mm thick commercial ply base fixed to wooden screws
& washers.
1.44.1 Size 600 x 450mm x 4 mm thick Each
1.44.2 Other sizes Sqm.
Note :- For other quality mirrors from approved make mirrors deduct 30%

1.45 P & F Looking Mirrors with P.V.C. frame of approved make as per
direction of Engineer-in-charge
1.45.1 Size 500x400mm Each
1.45.2 Oval shape 450x350 mm Each
1.45.3 Round 500mm dia Each
Note :- For other quality mirrors from approved make mirrors deduct 30%

1.46 P & F Toilet Shelf of approved quality/make:

1.46.1 W.V.C. (I.S.: 2556 Mark) Size 300mm Each
1.46.2 W.V.C. (I.S.: 2556 Mark) Size 550 mm Each

BSR_S1 [472]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.46.3 Synthetic Material with tumbler of approved quality/make size 470 x Each
114 x 36mm
1.46.4 Hard Plastic of approved make as per direction of EI of size Each
590x140mm
1.46.5 Acrylic shelf on C.P. brass casted brackets & guard rail of approved Each
make as per direction of EI of size 550x125mm
1.46.6 Glass Shelf with edges rounded off Anodised Aluminium angle frame & Each

C.P. brass brackets & guard rail size 600x120mm

1.47 P & F Towel Rail or Ring of approved quality/make:

1.47.1 C.P. brass Towel Rail elbow type with concealed screws size 450mm Each
(Heavy duty).
1.47.2 C.P. brass Towel Rail elbow type with concealed screws size 600 mm Each
(Heavy duty).
1.47.3 C.P. brass towel rail with brackets 450 x 20mm. Each
1.47.4 C.P. brass towel rail with brackets 600 x 20mm. Each

1.47.5 Synthetic Material(PTMT) of approved quality/make size 525 x90 x Each

75mm
1.47.6 Synthetic Material(PTMT) of approved quality/make size 675 x90 x Each
75mm
1.47.7 WVC (1stquality, IS2556 Marked) of approved make. Recessed towel Each
Hanger size 108 x 108mm.
1.47.8 C.P. Brass Towel Ring revolving type Each
1.47.9 Synthetic Material (PTMT) Towel Ring of approved quality/make. Each

1.48 P & F Grating of approved quality/make:

1.48.1 Stainless Steel Sheet size 125mm dia. Each
1.48.2 Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make Each

1.48.3 Synthetic Material(PTMT) of approved quality/make size 125mm dia. Each

1.48.4 (-do-) 150mm dia. Each

1.48.5 (-do-) Square 150 x 150 x 8mm. (Anti Cockroach) Each
1.48.6 C.P. brass with frame (Heavy) & superior quality size 125mm dia. Each

1.48.7 (-do-) Light & superior quality size 125mm dia Each
1.48.8 Cast Iron. Each

BSR_S1 [473]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.49 P & F Liquid Soap Container with brackets complete of approved make:

1.49.1 C.P. brass Each

1.49.2 Synthetic Material of approved quality/make: Each

1.50 P & F Tooth Paste & Brush Holder of approved quality/make:

1.50.1 C.P. brass Each

1.50.2 C.P. brass (Heavy and Superior quality) Each
1.50.3 Stainless Steel Each

1.51 P & F Toilet Paper Holder with rod of approved quality/make:

1.51.1 C.P. brass Each

1.51.2 C.P. brass heavy & Superior quality. Each
1.51.3 WVC (1stquality, IS 2556 Marked) recessed size 150x150mm. Each

1.51.4 (-do-) exposed (-do-) Each

1.52 P & F Soap Dish or Tray of approved quality/make

1.52.1 C.P. brass Each
1.52.2 C.P. brass heavy and superior quality. Each
1.52.3 WVC (1st Quality, IS 2556 Marked) recessed size 150 x 150 mm. Each

1.52.4 (-do-) 200 x100mm. Each

1.52.5 (-do-) Soap tray 170mm. Each
1.52.6 (-do-) Soap Dish 380mm. Each

1.53 P & F Twin- peg of approved quality / make

1.53.1 C.P. brass Each
1.53.2 C.P. brass (heavy)Superior quality Each
1.53.3 Acrylic Each

1.54 P & F Shower arm 15mm dia of approved quality/make.

1.54.1 C.P.brass heavy & superior quality 150mm Each
Projection.
1.54.2 (-do-) size 220mm(-do-) Each
1.54.3 (-do-) size 300mm.(-do-) Each
1.54.4 (-do-) size 370mm.(-do-) Each

BSR_S1 [474]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.55 P & F Bath Shower of approved quality/make.
1.55.1 C.P. brass fixed. Each
1.55.2 C.P. brass of Heavy & superior quality 150mm. Each
1.55.3 C.P. brass of Heavy & superior quality, revolving with adjustable key Each
150mm.

1.56 P & F Extension Pipe for bib cocks of approved quality/make.

1.56.1 C.P. brass of Heavy & Superior quality 50x15mm Each

1.56.2 (-do-) 100 X 15mm. Each
1.56.3 (-do-) 150 X 15mm. Each

1.57 P & F Acrylic Toilet accessories set consisting of Towel rail, shelf, Each
towel ring, soap dish, paste & brush holder & twin peg of approved
quality/make.

1.58 Labour Charges for removing WVC pan:

1.58.1 Indian/Orissa pan Each
1.58.2 European W.C. Each
1.58.3 Flushing cistern Each

1.59 P & F Jet spray for water closet with C.P. Copper Tube flange of Each
approved make.

1.60 Providing & fixing C.P.flange for 15mm dia taps. Each

1.61 Providing and fixing 1st quality standard white, grey, ivory, fume red Sqm.
brown, light green, light blue and other light shades glazed tiles
confirming to code IS : 15622 of size 200mm x 300mm in walls, floors,
steps, pillars etc. laid on a bed of neat cement slurry finished with flush
pointing in the white cement mixed with pigment to match the shade of
the tile complete (excluding the cost of cement plaster on walls and
pillar).

BSR_S1 [475]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.62 Providing and fixing 1st quality MAT finished ceremic tile size Sqm.
300x300mm confirming to code IS : 15622 colour such as white, grey,
ivory, fume red brown, light green, light blue and other light shades in
floors, steps, pillars etc. laid on a bed of neat cement slurry finished with
flush pointing in the white cement mixed with pigment to match the
shade of the tile complete (including the cost of cement mortar bed 1:4).

1.63 Extra for using Marble printed / Granite shade or dark shade tiles Sqm
instead of white, grey, ivory, fume red brown, light green, light
blue and other light shades in glazed tiles and MAT finished tiles.

1.64 Extra for using size above 200x300mm in glazed tiles and for using Sqm

400mm x 400mm MAT finished tiles in place of 300mm x 300mm size.

1.65 P & F C.P. Health Faucet with 1Mtr. Long Tube & Hook of approved Each

make and heavy as per direction of Enginner-in-Charge

1.66 P & F C.P. brass Urinal Spreader for Large Urinal of heavy duty of Each

approved make as per direction of Enginner-in-Charge

1.67 Removing & Re fixing of P.V.C. Cistern fittings (Syphon, Ball cock & Each

Handle Set) complete as per direction of Enginner-in-Charge

1.68 Providing & Fixing Premium Quality white glazed vitreous china
Sanitary Wares (IS:2556 Mark) of approved make as per direction of
Engineer-in-charge including cutting and making good the wall and
floor.

1.68.1 W.C. orissa pan with 100 mm vitreous china P or S trap (Size 580x440 Each
mm.)
1.68.2 Universal (anglo-Indian type) with P or S trap Each
1.68.3 Wall Mounting European type W.C. Each
1.68.4 Double Syphonic European W.C. with mounted W.V.C. flushing cistern Each
of 10 litre capacity complete with all necessary internal fittings with
Hydraulic seat cover.

BSR_S1 [476]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

1.69 Providing & Fixing premium qulaity WVC Urinal with PVC waste pipe,

dome couplings, concealed iron brackets or screws etc. complete.

1.69.1 Flat Back (small) size 440x265x315 mm. Each
1..69.2 Flat Back (large) or half stall size 590x375x390 mm. Each

1.70 Providing & Fixing premium qulaity W.V.C. Urinal Partition plate of Each
size 630x315 mm

1.71 Providing & Fixing premium qulaity WVC Wash basin with C.I.
brackets duly painted & 32 mm C.P. brass waste coupling of approved
make with PVC waste pipe complete
1.71.1 Size 550 mm x 400 mm Each
1.71.2 Size 550 mm x 400 mm dia for counter top. Each

1.72 P & F Premiumquality water closet Seat Covers with brass hinges Each

complete Solid PVC (ISI marked) grade-I White for EWC.

1.73 P & F Premium quality Low level Flushing Cistern of 10 litres capacity Each
(IS:2556 mark) of approved make as per Engineer-in-charge with
complete fittings C.I. brackets duly painted, brass ball cock with ball,
(IS:1703 mark) complete including cutting and making good the wall :

1.74 P&F Looking Mirror 5mm thick of approved make with ornamental Sqm
frame size 50x12 with 6mm Ply Board on Back Side Complete as per
approved sample

1.75 Supply of Hydraulic Seat Cover for Europeon WC of superior quality Each
approved make in white Colour

1.76 Providing & Fixing chair for wall hung W.C. Each

1.77 Providing & Fixing Concealed cistern with Floor mounting frame and Each
flush plate of superior quality and approved sample by Engineer-in-
charge.

1.78 Providing and fixing new spindle for Bib cock/pillar cock for repairing Each

purpose to solve leakage and proper functioning of tap.

BSR_S1 [477]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.79 Providing & Fixing premium quality Toilet corner Glass Shelf size Each
225x225mm with C.P. brass brackets & guard rail edges rounded of SS
frame

1.80 Providing & Fixing premium quality waste coupling 32mm half Each
thread as per approved by Engineer in Charge.

1.81 Providing & Fixing Premium quality Bottle trap internal portion 32mm, Each
size 250mm long wall connection pipe & wall flange as per approved
by Engineer in Charge.

BSR_S1 [478]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-1
INSTALLATION WORK

Rate (Rs.)
4

980.00
1069.00
1113.00

2640.00
3080.00

2420.00

5198.00

4068.00

3457.00
3879.00
4441.00

BSR_S1 [479]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

50%

65%

402.00
485.00
501.00
352.00
402.00

79.00

286.00

146.00

215.00

544.00

12114.00

BSR_S1 [480]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1832.00
4637.00
2287.00

994.00

923.00
862.00
801.00

585.00
757.00

853.00

339.00

2483.00
1291.00
1645.00

2599.00
1491.00

BSR_S1 [481]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1087.00
90.00

439.00
513.00
168.00
254.00

828.00

306.00

244.00

462.00

145.00

1331.00
1068.00
736.00
504.00

363.00

246.00

152.00
206.00

157.00

BSR_S1 [482]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

375.00

239.00

165.00

3072.00
3209.00
3674.00
3793.00
2196.00
2404.00

2268.00
2408.00
2598.00
2745.00
3477.00
2232.00
2957.00
2994.00
3265.00
90.00

1058.00

BSR_S1 [483]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1142.00

3890.00

3743.00

2754.00
2278.00
2059.00
1619.00
1430.00
1839.00

3817.00
4330.00
5062.00
5576.00
8725.00
35%

1200.00
407.00

1444.00

BSR_S1 [484]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

584.00
633.00
512.00
572.00
130.00

143.00
218.00
262.00
305.00

145.00
61.00
157.00
224.00
297.00

575.00
1538.00

351.00
514.00
549.00

440.00
520.00

BSR_S1 [485]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
431.00

520.00

997.00

361.00

468.00

516.00

296.00
337.00

152.00

165.00

144.00

254.00
165.00

62.00
97.00

89.00

97.00
358.00
131.00

55.00
69.00

BSR_S1 [486]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

238.00
164.00

127.00
520.00
319.00

223.00
602.00
305.00

238.00

127.00
156.00
283.00

327.00
245.00
327.00

79.00
149.00
76.00

198.00

307.00
337.00
376.00

BSR_S1 [487]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

149.00
376.00
573.00

85.00
119.00
168.00

1179.00

227.00
227.00
96.00

381.00

18.00

674.00

BSR_S1 [488]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
748.00

10%

10%

605.00

617.00

468.00

3065.00

6386.00
9072.00
17839.00

BSR_S1 [489]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

2619.00
6246.00

2636.00

2334.00
3372.00

714.00

1823.00

2544.00

4057.00

1604.00

8187.00

114.00

BSR_S1 [490]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1562.00

519.00

1599.00

BSR_S1 [491]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-2
WATER SUPPLY INSTALLATION
Chapter
Description Unit
Code No
1 2 3

GALVANISED IRON PIPES

2.1 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union
(IS:1239 Mark) & MS clamps including cutting and making good the
walls and floors:
(a) Exposed on wall
2.1.1 15 mm dia nominal bore
'A' Class Mtr.
'B' Class Mtr.

2.1.2 20mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.3 25mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.4 32mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.5 40mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.6 50mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.7 65mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.1.8 80mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

BSR_S2 [492]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

(b) Concealed pipe in wall including painting with anticorrosive

bitumen paint
2.1.9 15 mm dia nominal bore
'A' Class Mtr.
'B' Class Mtr.

2.1.10 20mm dia nominal bore

'A' Class Mtr
'B' Class Mtr

2.1.11 25mm dia nominal bore

2.1.11.1 A' Class Mtr
2.1.11.2 B' Class Mtr

2.2 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239

Mark) including trenching & refilling earth etc.

2.2.1 15mm dia nominal bore
'A' Class Mtr.
'B' Class Mtr.

2.2.2 20mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.3 25mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.4 32mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.5 40mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.6 50mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

BSR_S2 [493]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.2.7 65mm dia nominal bore
'A' Class Mtr.
'B' Class Mtr.

2.2.8 80mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.9 100mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.2.10 125mm dia nominal bore

'A' Class Mtr.
'B' Class Mtr.

2.3 Making connection of G.I. distribution branch with G.I. main including
all fitting.
2.3.1 Upto 25mm dia Each
2.3.2 Beyond 25mm & upto 100mm dia Each

2.4 Fixing water meter (IS: 779 mark) and stop cock in G.I. pipe line Each
including making chamber of approved size excluding cost of water
meter & stop cock.

2.5 P & F water meter (IS : 779 mark) of approved make.

2.5.1 15mm dia Each
2.5.2 20mm dia Each
2.5.3 25 mm dia Each

COCKS, MIXERS, DIVERTORS & VALVES

Note:
(a) The rates are for ISI marked item.
(b) If the items are Non- ISI marked, reduce the rate by 25%.

2.6 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and
approved make:
2.6.1 C.P. Pillar cock, 15 mm dia nominal bore Each
2.6.2 C.P. Pillar cock Elbow action, 15 mm Each
nominal bore.
2.6.3 C.P. Pillar cock fancy type ,15mm Each
nominal bore.

BSR_S2 [494]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.6.4 C.P. Pillar cock, Swan-neck with casted spout, 15mm nominal bore. Each

2.6.5 C.P. Pillar cock, high-neck, 15 mm nominal bore. Each

2.6.6 Synthetic Material (PTMT) Pillar cock of approved quality / make Each
15mm nominal bore.

2.7 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:

2.7.1 Brass 400 gm,15mm nominal bore. Each

2.7.2 P.V.C.heavy duty, 15mm nominal bore. Each
2.7.3 C.P. Brass bib cock,15mm nominal bore. Each
2.7.4 (-do-) Long body, 15mm nominal bore weight not less than 690 gm Each

2.7.5 (-do-) Long nose, 15mm nominal bore weight not less than 810 gm Each

2.7.6 (-do-) Elbow-action, 15mm nominal bore. Each

2.7.7 Synthetic Material(PTMT) bib cock of approved quality/ make, nominal Each
bore, 15mm, 86 mm long.
2.7.8 (-do-) Fancy Type, 122 mm long. Each
2.7.9 (-do-) Long Body, 175 mm long Each

2.8 P & F Stop Cock (IS :8931 Mark), superior quality & of approved
make:
2.8.1 Brass 400 gm. 15mm nominal bore. Each
2.8.2 (-do-) 750 gm. 20 mm nominal bore. Each
2.8.3 (-do-) 1350gm. 25 mm nominal bore. Each
2.8.4 C.P. Brass 15mm nominal bore. Each
2.8.5 (-do-) Concealed Stop Cock 15mm. Each
2.8.6 Synthetic material (PTMT) stop cock of approved quality/make 15mm. Each

2.8.7 (-do-) Concealed stop cock 15mm Each

2.9 P & F Sink Cocks of superior quality & approved made :

2.9.1 C.P. Sink cock swinging spout 15mm. Each
2.9.2 (-do-) Casted Spout 15 mm. Each

2.10 P & F Push Cock superior quality, of approved make

2..10.1 C.P. Brass 15 mm. Each
2.10.2 Synthetic Material (PTMT) push cock of approved quality/make 15mm. Each

BSR_S2 [495]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.11 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :

2.11.1 Brass wt. Not less than 300 gm,15mm. Each

2.11.2 Brass wt.Not less than 400 gm, 20mm. Each
2.11.3 (-do-) wt.Not less than 600 gm, 25mm. Each
2.11.4 (-do-) wt.Not less than 800 gm, 32mm. Each
2.11.5 (-do-) wt.Not less than 1000 gm 40mm.: Each
2.11.6 (-do-) wt.Not less than 1200 gm 50mm. Each

2.11.7 Synthetic material (PTMT) of approved make 15mm nominal size. Each

2.11.8 (-do-) 20 mm nominal size. Each

2.11.9 (-do-) 25 mm nominal size. Each
2.11.10 (-do-) 50 mm nominal size. Each

2.12 P & F Inlet Connection (Angle Valves) Superior quality, of approved

make, for Wash basin, Gyser etc.
2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked) Each
2.12.2 ---do--- with 37 cm long pipe and nut. Each
2.12.3 ---do--- with 60 cm long thread and nut Each
2.12.4 Synthetic Material (PTMT) Inlet connection of approved quality/make Each
15 mm nominal size.

2.13 P & F 15 mm. Dia Connection Pipe of approved quality/make :

2.13.1 PVC pipe with C.P. Brass nuts upto length, 300mm Each
2.13.2 (-do-) upto length 370mm Each
2.13.3 (-do-) 450mm. Each
2.13.4 (-do-) 600mm. Each
2.13.5 CP Brass Pipe with CP Brass nuts upto length 300mm. Each
2.13.6 (-do-) 370mm. Each
2.13.7 (-do-) 450mm. Each
2.13.8 (-do-) 600mm. Each

2.14 P & F Flush Cock / Flush Valve (IS : 9758 Mark)

for WC of approved quality make :
2.14.1 CP brass push type 15mm nominal bore. Each
2.14.2 (-do-) 20mm nominal bore. Each
2.14.3 (-do-)exposed 25mm nominal bore. Each
2.14.4 (-do-) 32mm nominal bore. Each
2.14.5 (-do-) concealed 25mm nominal bore. Each
2.14.6 (-do-) concealed 32mm nominal bore. Each

BSR_S2 [496]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.14.7 (-do-) Half-turn exposed 25mm nominal bore. Each
2.14.8 (-do-) Concealed 25mm nominal bore. Each
2.14.9 Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, Each
25mm nominal bore.
2.14.10 CP Brass flush valve 32mm nominal bore Each

2.15 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :

2.15.1 Gun-metal 15mm nominal bore. Each

2.15.2 (-do-) 20mm nominal bore. Each
2.15.3 (-do-) 25mm nominal bore. Each

2.15.4 (-do-) 32mm nominal bore. Each

2.15.5 (-do-) 40mm nominal bore. Each
2.15.6 (-do-) 50mm nominal bore. Each
2.15.7 (-do-) 65mm nominal bore. Each
2.15.8 (-do-) 80mm nominal bore. Each
2.15.9 (-do-)100 mm dia nominal bore Each

2.16 P & F Gun-metal Non-return Valve or Check Valve (IS : 778 Make) of
approved make, superior quality:
2.16.1 15mm nominal bore.
(a) Horizontal Each
(b) Vertical Each

2.16.2 20mm nominal bore.

(a) Horizontal Each
(b) Vertical Each

2.16.3 25mm nominal bore.

(a) Horizontal Each
(b) Vertical Each

2.16.4 32mm nominal bore.

(a) Horizontal Each
(b) Vertical Each

2.16.5 40mm nominal bore.

(a) Horizontal Each
(b) Vertical Each

2.16.6 50mm nominal bore.

(a) Horizontal Each

BSR_S2 [497]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(b) Vertical Each

2.17 P & F Flush Valve (Hydraulic) with level complete (IS : 9758
Mark) of approved make :
2.17.1 32mm nominal bore. Each
25mm nominal bore. Each

2.18 P & F Oxidised Gas Taps, Bench-type of superior quality and approved
make:
2.18.1 One way Each
2.18.2 Two way Each
2.18.3 Three way Each
2.18.4 Four way Each

2.19 P & F Chromium plated Swan-neck Laboratory Cock of approved

quality / make:
2.19.1 One way Each
2.19.2 Two way Each
2.19.3 Three way Each
2.19.4 Four way Each

2.20 P & F Spouts of superior quality and approved make:

2.20.1 C.P. brass spout Each
2.20.2 (-do-) Extra heavy with flange. Each

2.21 P & F Mixing Range (15mm)

2.21.1 C.P. One hole/close hole basin mixer with casted spout. Each
2.21.2 (-do-) with swinging spout casted. Each
2.21.3 C.P. sink mixer with swinging spout J-pipe. Each
2.21.4 (-do-) With casted spout. Each
2.21.5 C.P. valve mixer non-telephonic type. Each
2.21.6 C.P. wall mixer telephonic type crutch & telephonic shower. Each
2.21.7 (-do-) without crutch & telephonic shower. Each
2.21.8 C.P. Bath-tub mixer without telephonic shower but with crutch. Each

2.21.9 C.P. Surgical basin mixer elbow action. Each

2.21.10 (-do-) with shower (wall type) Each

2.22 P & F Divertors of superior quality and approved

make:
2.22.1 C.P. brass Tip-tone divertor bath spout with mixing valve. Each
2.22.2 (-do-) Three way (-do-) Each
2.22.3 (-do-) Two way with 22Cm. Pipe flange Each

BSR_S2 [498]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

2.23 P & F foot valve of superior quality and approved make with
fittings :
2.23.1 Brass 25 mm. Each
2.23.2 CI 50 mm Each
2.23.3 CI 65 mm Each
2.23.4 CI 80 mm Each
2.23.5 CI 100 mm Each

2.24 P & F Precast R.C.C. Water Storage Tank with R.C.C. cover 25mm
thick and 15 Cm. Long G.I. over-flow pipe including making
connections etc. & hoisting upto 1M. ht. From ground level having:
2.24.1 340 litres water capacity size 90 x 75 x 60 Cm. Each
2.24.2 270 litres water capacity size 90 x 60 x 60 Cm. Each

2.25 Hoisting Charges of precast R.C.C. water storage tank on each floor :

2.25.1 340 litres water capacity. Each

2.25.2 270 litres water capacity. Each

2.26 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS
license No), of approved make with cover, 25mm dia 1M long G.I.
over-flow pipe & 25 Cm. long wash out pipe with plug & socket,
including making connection etc., complete of approved design:

2.26.1 200 litres capacity. Each

2.26.2 300 (-do-) Each
2.26.3 500 (-do-) Each
2.26.4 750 (-do-) Each
2.26.5 1000 (-do-) Each
2.26.6 2000 (-do-) Each
2.26.7 3000(-do-) Each
2.26.8 5000(-do-) Each

2.27 Hoisting Charges for each floor :

2.27.1 For items 2.26.1 to 2.26.4 Each
2.27.2 For items 2.26.5 to 2.26.8 Each

2.28 Providing and fixing Bitumen Paint Coating over G.I. Pipes Complete as
per Specifications. –
2.28.1 15 mm dia Rmt.

BSR_S2 [499]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.28.2 20 mm dia Rmt.
2.28.3 25 mm dia Rmt.
2.28.4 40 mm dia Rmt.

2.29 Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-

PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with
carbon black having thermal stabillity for hot and cold water supply,
capable to withstand temperature upto 80ºC including all special fittings
of composite material (engineering plastic blend and brass inserts
wherever required) e.g. elbows, tees, reducers, couplers connectors
etc.with clamps at 1.00 metre spacing.This include the cost of cutting
chases and including testing of joints complete as per direction of
Engineer In charge
Internal work - Exposed on Wall
2.29.1 1216 (16mm OD) pipe Metre
2.29.2 1620 (20mm OD) pipe Metre

2.29.3 2025 (25mm OD) pipe Metre

2.29.4 2532 (32mm OD) pipe Metre
2.29.5 3240 (40mm OD) pipe Metre

2.30 Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-

PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with
carbon black having thermal stabillity for hot and cold water supply,
capable to withstand temperature upto 80ºC including all special fittings
of composite material (engineering plastic blend and brass inserts
wherever required) e.g. elbows, tees, reducers, couplers connectors
etc.with clamps at 1.00 metre spacing.This include the cost of cutting
chases and including testing of joints complete as per direction of
Engineer In charge
Concealed installation including cutting chases and making good the
walls etc. complete.
2.30.1 1216 (16mm OD) pipe Metre
2.30.2 1620 (20mm OD) pipe Metre
2.30.3 2025 (25mm OD) pipe Metre
2.30.4 2532 (32mm OD) pipe Metre
2.30.5 3240 (40mm OD) pipe Metre

BSR_S2 [500]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.31 Providing and fixing Polyethylene - Aluminium -Polyethylene (PE-AL-
PE) Composite Pressure Pipes as per 15450 : 2004 U.V. stablised with
carbon black having thermal stabillity for hot and cold water supply,
capable to withstand temperature upto 80ºC including all special fittings
of composite material (engineering plastic blend and brass inserts
wherever required) e.g. elbows, tees, reducers, couplers connectors
etc.with trenching & refilling and testing of joints complete as per
direction of Engineer In charge
External work
2.31.1 1216 (16mm OD) pipe Metre
2.31..2 1620 (20mm OD) pipe Metre
2.31.3 2025 (25mm OD) pipe Metre
2.31..4 2532 (32mm OD) pipe Metre
2.31.5 3240 (40mm OD) pipe Metre

2.32 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required
complete in all respect of size :
2.32.1 15mm dia nominal bore Each
2.32.2 20mm dia nominal bore Each
2.32.3 25mm dia nominal bore Each
2.32.4 32mm dia nominal bore Each

2.32.5 40mm dia nominal bore Each

2.32.6 50mm dia nominal bore Each
2.32.7 65mm dia nominal bore Each
2.32.8 80mm dia nominal bore Each

2.33 Providing and fixing Superior quality CP Brass fittings of approved

make as per direction of Engineer-in-charge

2.33.1 Pillar Cock 15 mm nominal size Each

2.33.2 Swan neck pillar cock 15 mm nominal size Each
2.33.3 Bib Cock with long thread 15 mm nominal size Each
2.33.4 Long body Bib Cock 15 mm nominal size Each
2.33.5 Two way Bib Cock 15 mm nominal size Each
2.33.6 Angular stop cock with long thread 15 mm nominal size Each
2.33.7 Stop cock long thread Each
2.33.8 Stop cock with reduced body Each
2.33.9 Concealed stop cock 15 mm nominal size Each
2.33.10 Sink cock with swinging casted spout (table mounted ) 15 mm nominal Each
size

BSR_S2 [501]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.33.11 Single lever wash basin mixer with 450 mm long copper connection Each
pipe
2.33.12 Central hole basin mixer Each
2.33.13 Wall mixer 3 in 1 system with provision of tetephonic bath shower with Each
bend pipe
2.33.14 600 mm long towel rail Each
2.33.15 Revolving type towel ring Each
2.33.16 Soap dish Each
2.33.17 Double coat hook Each
2.33.18 190 mm rain shower Each
2.33.19 Shower arm Each
2.33.20 Paper holder Each
2.33.21 Hand shower with 8 mm dia 1 mt long PVC tube & wall hook complete Each

2.33.22 Health focet (Premium heavy Quality) as approved by Engineer-in- Each

Charge
2.33.23 Jet Spray (Premium heavy Quality) as approved by Engineer-in-Charge Each

2.34 Providing and fixing 3-layer PP-R (Polypropylene random coplymer )

pipes SDR 7.4 UV stabilized and antimicrobial fusion welded, having
thermal stability for hot & cold water supply including all PP-R plain &
brass threaded Polypropylene random fittings and fixing the pipe with
clamps at 1 metre spacing. This includes testing of joint complete as per
direction of Engineer - in charge.( INTERNAL WORK- EXPOSED ON
WALL)
2.34.1 PN-16 Pipe, 16 mm OD Rm
2.34.2 PN-16 Pipe, 20 mm OD Rm
2.34.3 PN-16 Pipe, 25 mm OD Rm
2.34.4 PN-16 Pipe, 32 mm OD Rm
2.34.5 PN-16 Pipe, 40 mm OD Rm
2.34.6 PN-16 Pipe, 50 mm OD Rm

BSR_S2 [502]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.35 Providing and fixing 3-layer PP-R (Polypropylene random coplymer )
pipes SDR 7.4 UV stabilized and antimicrobial fusion welded, having
thermal stability for hot & cold water supply including all PP-R plain &
brass threaded Polypropylene random fittings and fixing the pipe with
clamps at 1 metre spacing. This includes cost of cutting chases and
making good the same including testing of joint complete as per
direction of Engineer - in charge.(CONCEALED WORK INCLUDING
CUTTING CHASES AND MAKING GOOD THE WALL ETC.)
2.35.1 PN-16 Pipe, 16 mm OD Rm
2.35.2 PN-16 Pipe, 20 mm OD Rm
2.35.3 PN-16 Pipe, 25 mm OD Rm
2.35.4 PN-16 Pipe, 32 mm OD Rm

2.36 Providing and fixing 3-layer PP-R (Polypropylene random coplymer )

pipes SDR 7.4 UV stabilized and antimicrobial fusion welded, having
thermal stability for hot & cold water supply including all PP-R plain &
brass threaded Polypropylene random fittings including trenching,
refilling and testing of joint complete as per direction of Engineer - in
charge. (EXTERNAL WORKS)
2.36.1 PN-16 Pipe, 16 mm OD Rm
2.36.2 PN-16 Pipe, 20 mm OD Rm
2.36.3 PN-16 Pipe, 25 mm OD Rm
2.36.4 PN-16 Pipe, 32 mm OD Rm
2.36.5 PN-16 Pipe, 40 mm OD Rm
2.36.6 PN-16 Pipe, 50 mm OD Rm
2.36.7 PN-16 Pipe, 63 mm OD Rm

2.37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS
15778 : 2007 code) having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings i/c fixing the pipe
with clamps at 1 metre spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete as per
direction of Engineer in Charge. (Internal work Exposed on wall)
2.37.1 15 mm nominal size Rm
2.37.2 20mm nominal size Rm
2.37.3 25 mm nominal size Rm
2.37.4 32mm nominal size Rm
2.37.5 40 mm nominal size Rm

BSR_S2 [503]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.37.6 50 mm nominal size Rm

2.38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS
15778 : 2007 code) having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings i/c fixing the pipe
with clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and the cost of cutting chases and
making good the same including testing of joints complete as per
direction of Engineer in Charge. (Concealed work including cutting
chases and making good the walls etc.,)
2.38.1 15 mm nominal size Rm
2.38.2 20mm nominal size Rm
2.38.3 25 mm nominal size Rm
2.38.4 32mm nominal size Rm

2.39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS
15778 : 2007 code) having thermal stability for hot & cold water supply
including all CPVC plain & brass threaded fittings, this included
jointing of pipes & fittings with one step CPVC solvent cement ,
trenching refilling & testing of joints complete as per direction of
Engineer in Charge.
(External work).

2.39.1 15 mm nominal size Rm

2.39.2 20mm nominal size Rm
2.39.3 25 mm nominal size Rm
2.39.4 32mm nominal size Rm
2.39.5 40 mm nominal size Rm
2.39.6 50 mm nominal size Rm

2.40 Providing and fixing Premium quality Towel rack 600mm long Each
260mm wide with lower hangers CP Brass fittings of approved make as
per direction of Engineer-in-charge

2.41 Labour Charges for Removing & Refixing the water Storage Tank of all Each
sizes and including all Necessary fitting complete in all respect as per
approved sample and direction of engineer in charge.

BSR_S2 [504]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.42 Providing and fixing premium quality Angular stop cock 15mm with Each

wall flange complete as per sample approved by Engineer in charge

2.43 Providing and fixing premium quality Two way Bib cock 15mm with Each

wall flange complete as per sample approved by Engineer in charge

2.44 Providing and fixing superior quality PVC Tank Cover complete as per
approved by Engineer In Charge

2.44.1 300 Lt. capacity Each

2.44.2 500 Lt. capacity Each

2.44.3 Above 500 Lt. capacity Each

2.45 Providing & fixing C.I. Saddle pieces 100mm dia with nut & bolt & Each

washer & Rubber Gasket complete as per direction of engineer in charge

2.46 Supply and installation of Premium quality sluice valve 100mm dia including Each
all fittings as per approved by Engineer in charge.

2.47 Providing Laying Jointing DI Pipe (Ductile iron pipe) of 100 mm dia ISI Mtr
marked K-7 grade as per IS : 5329-2000 with internal cement mortar
lining for potable water with rubber ring (EPDM/ SBR) Joints per IS :
5382-1985 complete including Hydraulic testing & commissioning as
per Technical Specification.

2.48 P&F Sluice valve of approved code IS 14846 : 2000 make

2.48.1 100 mm dia nominal bore Each
2.48.2 75 mm dia nominal bore Each

2.49 P&F Divertors in water supply lines for walls, wash basin etc Each

2.50 P & F of Water Spout Superior Quality of approve make. Each

2.51 P&F Sink Mixture of (Adjustable or Non Adjustable) Superior quality Each
Swan Neck.

BSR_S2 [505]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-2
UPPLY INSTALLATION
Rate (Rs.)
4

202.00
230.00

264.00
282.00

326.00
360.00

358.00
436.00

490.00
531.00

606.00
673.00

734.00
793.00

838.00
963.00

BSR_S2 [506]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

217.00
242.00

261.00
278.00

342.00
429.00

163.00
190.00

206.00
222.00

245.00
278.00

303.00
342.00

362.00
395.00

436.00
491.00

BSR_S2 [507]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

576.00
622.00

666.00
772.00

893.00
1064.00

1297.00
1455.00

265.00
389.00

308.00

949.00
1734.00
2378.00

779.00
820.00

914.00

BSR_S2 [508]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1246.00

779.00
388.00

298.00
106.00
590.00
783.00

1008.00

953.00
187.00

232.00
295.00

319.00
460.00
729.00
477.00
1009.00
231.00

259.00

977.00
977.00

370.00
205.00

BSR_S2 [509]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

314.00
372.00
440.00
480.00
728.00
789.00

277.00

383.00
710.00
1841.00

501.00
590.00
626.00
240.00

73.00
79.00
101.00
116.00
97.00
123.00
136.00
176.00

358.00
541.00
961.00
1301.00
975.00
1422.00

BSR_S2 [510]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
783.00
902.00
551.00

1993.00

227.00
358.00
529.00

703.00
1074.00
1464.00
1783.00
2670.00
4400

272.00
238.00

343.00
304.00

496.00
403.00

697.00
583.00

970.00
741.00

1416.00

BSR_S2 [511]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
964

2650.00

230.00
309.00
389.00
457.00

384.00
525.00
631.00
691.00

662.00
810.00

1740.00
2001.00
1876.00
1936.00
1800.00
3179.00
2541.00
3146.00

2541.00
4580.00

2556.00
2456.00
1410.00

BSR_S2 [512]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

172.00
431.00
543.00
831.00
1650.00

932.00
756.00

218.00
162.00

1569.00
2352.00
3920.00
5881.00
7841.00
15682.00
23522.00
39204.00

110.00
157.00

1.50

BSR_S2 [513]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2.00
2.50
4.00

235.00
270.00

328.00
435.00
559.00

200.00
221.00
261.00
339.00
414.00

BSR_S2 [514]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

178.00
199.00
239.00
317.00
392.00

101.00
140.00
164.00
242.00

306.00
463.00
902.00
1041.00

823.00
1580.00
823.00
1084.00
1174.00
762.00
799.00
1016.00
1162.00
1621.00

BSR_S2 [515]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
4659.00

2698.00
3743.00

1801.00
1101.00
1071.00
823.00
5583.00
1210.00
1125.00
1832.00

950.00

600.00

173.00
198.00
284.00
397.00
550.00
799.00

BSR_S2 [516]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

237.00
265.00
342.00
455.00

156.00
185.00
262.00
376.00
528.00
681.00
1146.00

191.00
222.00
282.00
369.00
519.00

BSR_S2 [517]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
802.00

279.00
289.00
376.00
476.00

167.00
196.00
262.00
343.00
471.00
757.00

3089.00

369.00

BSR_S2 [518]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1572.00

2335.00

186.00

201.00

216.00

196.00

5042.00

1088.00

10175.00
9625.00

10450.00

1870.00

5060.00

BSR_S2 [519]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-3
DRAINAGE / DISPOSAL WORK
Note :-
1 For laying of S.W. pipes beyond 1.2m depth, earthwork & close

timbering or open timbering (as per site conditions) is to be paid extra.

2 The rates for S.W. pipes are applicable to work executed in soils above
sub-soil water level. Extra allowance is to be made for working under
sub-soil water level.
3 Rock cutting wherever required will be paid extra.

Chapter
Description Unit
Code No
1 2 3

STONEWARE PIPES & FITTING

3.1 Providing Laying & jointing glazed S.W. pipes grade `A` (IS;651
marked) of approved make with spun yarn & stiff mixture of cement
mortar 1:1, excavation & refilling of earth in all types of soil upto 1.2m
depth, S.W. fittings, including testing of joints etc, complete.
3.1.1 100mm dia Mtr.
3.1.2 150mm dia Mtr.
3.1.3 200mm dia Mtr.
3.1.4 230mm dia Mtr.
3.1.5 250mm dia Mtr.
3.1.6 300mm dia Mtr.
3.1.7 400mm dia Mtr.
Note:-
1 If grade `AA S.W. pipes (IS:651 mark) are used then add 5%

2 Deduct 5% if jointing is done in CM 1:3.

3.2 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size)
all around S.W. pipe including 15 Cm. thick bed concrete (Width W=
Diameter of pipe in Cm+30 Cm.)( Excluding cost of pipe)
3.2.1 100mm dia S.W. pipe Mtr.
3.2.2 150mm dia S.W. pipe Mtr.
3.2.3 200mm dia S.W. pipe Mtr.
3.2.4 230mm dia S.W. pipe Mtr.
3.2.5 250mm dia S.W. pipe Mtr.
3.2.6 300mm dia S.W. pipe Mtr.
3.2.7 350mm dia S.W. pipe Mtr.
BSR_S3 [520]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.2.8 400mm dia S.W. pipe Mtr.

3.3 Providing & Laying C.C. 1:5:10 (Stone aggregate 40mm nominal size)
upto haunches of S.W. pipes including 150 mm thick bed concrete
(Width W= Dia of pipe in Cm+ 30Cm.) concrete width to be reduced
from width W at center of pipe to `0` at top of pipe. (Excluding cost of
pipe)
3.3.1 100mm dia S.W. pipe Mtr.
3.3.2 150mm dia S.W. pipe Mtr.
3.3.3 200mm dia S.W. pipe Mtr.
3.3.4 230mm dia S.W. pipe Mtr.
3.3.5 250mm dia S.W. pipe Mtr.
3.3.6 300mm dia S.W. pipe Mtr.
3.3.7 350mm dia S.W. pipe Mtr.
3.3.8 400mm dia S.W. pipe Mtr.

3.4 Providing & fixing S.W. square mouth Gully trap `A` grade (IS 651-

1992 marked) of approved make & design in existing man-hole.

3.4.1 Size 100 X 100mm Each
3.4.2 Size 150 X 100mm Each
3.4.3 Size 225 X 150mm Each

3.5 P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of
approved make complete with C.I. grating, frame & Cover masonary
chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm
thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3
complete as per approved design & type.
3.5.1 Trap size 150 X 100mm, ferrow cement cover with frame, Internal Each
Chamber size 300 X 300mm.
3.5.2 Trap size 225 X 150 mm, ferrow cement cover with frame Internal Each
Chamber size 450 X 450mm.

3.6 P & F S.W. Master Trap (Inter-cepting) `A` grade (I.S.: 651 marked) of
approved quality/make
3.6.1 100mm dia Each
3.6.2 150mm dia Each

3.7 Labour charges for Removing S.W. pipes including breaking of joints &
bed concrete, stacking of useful material at site within 50 mtr. Lead and
disposal of unserviceable material within 0.5 Km. lead:

BSR_S3 [521]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.7.1 100 & 150mm dia pipe Mtr.
3.7.2 200, 230 & 250mm dia pipe Mtr.

3.7.3 300mm dia pipe Mtr.

3.7.4 350mm dia pipe Mtr.
3.7.5 400mm dia pipe Mtr.

R.C.C. NON PRESSURE PIPES

3.8 Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes
(IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or
having Spigot and socket ends with flexible rubber rings joint including
testing of joints etc. complete :
3.8.1 100mm dia Internal Mtr.
3.8.2 150mm dia Internal Mtr.
3.8.3 200mm dia Internal Mtr.
3.8.4 250mm dia Internal Mtr.
3.8.5 300mm dia Internal Mtr.
3.8.6 450mm dia Internal Mtr.
3.8.7 500mm dia Internal Mtr.
3.8.8 600mm dia Internal Mtr.
3.8.9 700 mm dia Internal Mtr.
3.8.10 800 mm dia Internal Mtr.
3.8.11 900 mm dia Internal Mtr.
Note : Deduct 20 % for Non ISI marked pipes of all size

SAND-CAST IRON SOIL, WATER & RAIN WATER PIPES.

3.9 P & F Sand-cast Iron (S.C.I.) Pipe (IS : 1729mark) of approved make in .
wall or in floor with M.S. holder bat clamps in 10 X 10 X 10 Cm. M-15
grade concrete blocks, joints filled with CM 1:4 with spun yarn
including cutting holes and making good the wall:
3.9.1 50mm dia Mtr.
3.9.2 75mm dia Mtr.
3.9.3 100mm dia Mtr.
3.9.4 150mm dia Mtr.

3.10 Add extra for Lead caulked joints (IS:782-1978) in sand cast iron
pipes/spun-
3.10.1 75mm dia, 0.88 Kg. Pig lead Each
3.10.2 100mm dia, 0.98 Kg. Pig lead Each

BSR_S3 [522]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.10.3 150mm dia, 1.48 Kg. Pig lead Each

3.11 P &F S.C.I. Fittings (IS : 1729 mark) in CM 1:4 with spun yarn.

3.11.1 50mm w/o door

(i) Socket Each
(ii) Cowel Each
(iii) Tee Each
(iv) Bend Each

3.11.2 75 mm w/o door

(i) Offset Each
(ii) Socket Each
(iii) D/door Y-Tee Each
(iv) Cowel Each
(v) Tee Each
(vi) Bend Each
(vii) Door Cross Each

3.11.3 100mm-do-
(i) Offset Each
(ii) Socket Each
(iii) D/door Y-Tee Each
(iv) Cowel Each
(v) Tee Each
(vi) Bend Each
(vii) Door Cross Each

3.11.4 150mm w/o door

(i) Socket Each
(ii) Cowel Each
(iii) Bend Each

3.11.5 50mm with door

(i) Tee Each
(ii) Bend Each

3.11.6 75mm-do-
(i) Tee Each

BSR_S3 [523]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(ii) Bend Each

3.11.7 100mm-do-
(i) Tee Each
(ii) Bend Each

3.11.8 150mm-do-
(i) Tee Each
(ii) Bend Each

3.12 P & F Sand –cast Floor Trap (Nahni) of (IS:1729 mark) of approved
quality/make with socket down or hinged grating including cutting and
making good the floor.
3.12.1 Size 100 x 100mm Each
3.12.2 Size 100 x 75mm Each
3.12.3 Size 100 x 50mm Each

3.13 P & F Sand-cast Iron `P` or `S` Trap (IS:1729 make) of approved make. Each

3.14 Labour charges for making connection of sewer line through main hole. Each

3.15 Labour charges for removing C.I./A.C. pipes of all sizes including Mtr.

accessories with care and stacking of useful material.

RIGID PVC PIPE

3.16 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm 2.) approved
quality /make including joining the pipe with solvent cement rubber
ring and lubricant.
3.16.1 63 mm dia Mtr
3.16.2 75 mm dia Mtr
3.16.3 110 mm dia Mtr
3.16.4 160 mm dia Mtr
3.16.5 Providing & Laying C.C. 1:3:6 (Stone Agreegate 20mm nominal size)
all around PVC Pipe including 7.5 cm thick bed concerte [Width &
Height = Dia of Pipe in CM+15CM] excluding cost of Pipe &
Excavation of trenches etc.

BSR_S3 [524]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.16.5.1 PVC pipe 110 mm dia Mtr.
3.16.5.2 PVC pipe 160 mm dia Mtr.

3.17 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make

including joining the pipe with solvent cement rubber ring and lubricant:
3.17.1 Coupler (socket)
(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.2 Reducer 110 X 75 mm

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.3 Plain Tee

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.4 Door Tee

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.5 Door 'Y'

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.6 Double 'Y'

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.7 Double Door 'Y'

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.8 Bend 45
(i) 75mm dia Each

BSR_S3 [525]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.9 Bend 87 .5
(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.10 Door Bend (Top Side)

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.11 Door Bend (Left & Right)

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.12 Vent Cowel

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.13 Socket plug

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.14 Door Cap

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.15 Pipe Clip

(i) 75mm dia Each
(ii) 110mm dia Each
(iii) 160 mm dia Each

3.17.16 W.C. connector with lipring

110mm dia Each

3.17.17 W.C. connector bent type

110mm dia Each

BSR_S3 [526]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

3.17.18 Plain floor trap

110mm dia Each

3.17.19 Multi floor trap

110mm dia Each

3.17.20 height Raiser

110mm dia Each

3.17.21 Top Tile& straine

110mm dia Each

3.17.22 Top Tile only

110mm dia Each

3.17.23 P- Trap
110mm dia Each

3.17.24 Q- Trap
110mm dia Each

3.17.25 S- trap
110mm dia Each

3.17.26 Ring fitting

110mm dia Each

3.17.274 Gully trap

110mm dia Each

3.18 Raising manhole cover and frames slab to required level including

dismantling existing slab and making good the damage as required

(raising depth of manhole masonry to be paid separately).

3.18.1 Rectangular manhole 90x60 cm Each
3.18.2 Rectangular manhole 150x120 cm Each

BSR_S3 [527]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.19 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300
mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in
foundation, 20 mm thick inside plaster in CM 1:6, finished with floating
neat cement, 50mm thick M-15 grade C.C. flooring, making channels,
80mm thick stone slab covering with 40mm thick M-15 grade C.C.
flooring, Cement cover with frame of 450mm dia, earthwork etc.
complete as per design including disposal of surplus earth within 50 mtr.
lead.
3.19.1 Depth up to 0.5 M Each
3.19.2 Add extra over item 3.19.1 for every additional 0.10m depth above 0.5 Each
m depth.
3.19.3 Deduct in Item No 3.19.1 for manhole with brick work 230 mm thick in Each
place of 300 mm thick stone masonry

3.20 Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M,
with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete
1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with
floating neat cement, 50 mm thick M-15 grade C.C. flooring making
channels, 80 mm thick stone slab covering with 40 mm thick M-15
grade C.C. flooring, Ferro Cement cover with frame of 450mm dia,
earthwork etc. complete including disposal of surplus earth within 50
mtr. lead as per design :

3.20.1 Depth up to 1.5 M Each

3.20.2 Add extra over item 3.20.1 for every additional 0.10m depth above 1.5 Each
m depth .

3.21 Construction of chamber in all type of soil with 300 mm thick masonry

in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider

plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15

grade C.C. flooring , earthwork etc. complete as per design including

disposal of surplus earth within a lead of 50 mtr.

BSR_S3 [528]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

3.21.1 Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. Each

3.21.1.1 Deduct for using brick work 230 mm thick in place of 300 mm thick
stone masonry

3.21.2 -do- size 450 x 450mm depth upto 0.5 M Cement cover with frame Each

3.21.2.1 Deduct for using brick work 230 mm thick in place of 300 mm thick
stone masonry

3.21.3 -do- size 600 x 450mm depth upto 0.5 M Cement cover with frame. Each

3.21.3.1 Deduct for using brick work 230 mm thick in place of 300 mm thick
stone masonry

3.22.4 -do- depth upto 0.5 M to 1.0 M –do- Each

3.21.4.1 Deduct for using brick work 230 mm thick in place of 300 mm thick
stone masonry

3.22 Construction of soakage well in all type of soil with 300 mm thick dry
masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone
slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15
grade C.C flooring , earthwork complete as per approved drawing
including disposal of earth within a lead of 50 mtr.:
3.22.1 Size 300 Cm. dia outside & 300 Cm. depth . Each
3.22.2 -do- & 240 Cm. Depth. Each
3.22.3 Size 240 Cm. dia outside & 240 Cm. depth. Each

3.23 Construction of soakage Trench in all types of soil with 300 mm thick
dry stone masonry, 80 mm thick stone slab covering, jointing of slab in
CM 1:3 Ralthal, Kharanja, 40 mm thick M-15grade C.C. flooring
earthwork etc. complete as per approved drawing including disposal of
earth within a lead of 50 Mtr.:
3.23.1 Top width 180Cm., bottom width 90Cm. & depth 240Cm. Mtr.
3.23.2 -do- 240 Cm., -do- 150Cm. & depth 300 Cm Mtr.

BSR_S3 [529]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.24 Construction of Soakage well in all types of soil of approved drawing,
top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick
stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja
40mm thick M-15 grade C.C flooring, earth work etc . complete
including disposal of surplus earth within a lead of 50 mtr .
3.24.1 Inner dia 90 Cm & 10 to 12 Mtr deep. Each
3.24.2 Inner dia 60 Cm & 10 to 12 Mtr deep. Each

3.25 Labour charges for construction of Soakage well of 90 Cm. dia (Earth – Mtr

work & its disposal ,with in a lead of 0.5 Km .only ).

3.26 Add extra if Soakage Well is filled with dry stones. Cum

3.27 Construction of septic Tank in all types of soil with 40 Cm .thick

masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C
floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick
stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with
neat floating cement, 4 Nos stone foot rests of approved design ,two No.
450 mm dia each Ferro cement cover with frame, earth work etc.
complete as per approved drawing including disposal of surplus earth
within a lead of 50 mtr:-

3.27.1 Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) Each
slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways
including shuttering complete in all respect.
3.27.2 Size 230 x110 x150 cm.(for 20 users) with 115 mm thick RCC (M-20) Each
slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways
including shuttering complete in all respect.
3.27.3 Size 400 x140x150 cm.(for 50 users) with 115 mm thick RCC (M-20) Each
slab with Tor steel reinforcement 10mm ϕ @15 cm c/c bothways
including shuttering complete in all respect.
Note :- Add or subtract proportionately for every 0.5 M increase or

decrease in Length -12.5% Breadth & Depth -18 % each

BSR_S3 [530]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.28 Emptying of Septic tank ,Soakage well etc. by disposing or sludge upto Cum

5 Km. lead & taking out sewage including cleaning of site.

3.29 Add extra if R.C.C slab of designed thickness & reinforcement is Sqm
provided on manhole in place of stone slab( Actual area of R.C.C slab to
be measured).

3.30 P & F M.S. Foot Rests in with C.M.,1:3, standard design in 20mm Each
square M.S. bar 50 mm embedded in wall & 10 cms. projected out
complete.

3.31 Supplying and fixing C.I. Cover with frame, C.I. gratings for chambers Kg.
& man holes.

3.32 Supplying and fixing Ferro- cement cover with C.I. frame for
chambers & man holes of size.
3.32.1 450mm dia, 5Kg. C.I. frame to with stand 3 MT center point load & Each

minimum unfractured load of 1 MT. (Light duty).

3.32.2 500mm dia 12 Kg.-do-15 MT centre point load (medium duty). Each

3.32.3 500mm dia 22 Kg.-do-22 MT centre point load (Heavy duty). Each

3.32.4 500mm dia 25 Kg.-do-70 MT centre point load seal type (Heavy duty.) Each

3.32.5 Rectangular shape 600 x 450 mm, to withstand 3 MT center point Each

load & minimum unfractured load of 1 MT. (Light duty).

3.33 Supplying & Fixing R.C.C. Manholes covers with frame of approved
make (Light duty).

3.33.1 Size 500mm dia (Double seal) Each

3.33.2 Size 450mm dia Each
3.33.3 Size 400mm dia Each
3.33.4 Size 600 X 600mm (Double seal) Each
3.33.5 Size 600 X 450mm Each
3.33.6 Size 450 X 450mm Each
3.33.7 Size 300 X 300mm Each
3.33.8 Size 250 X 250mm Each
3.33.9 Size 180 X 180mm Each

BSR_S3 [531]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.34 Construction of Open Surface Drain with 112mm thick brick masonry
in CM 1:4,110mm thick base concrete 1:5:10, 37mm thick M-15 grade
C.C. flooring ,12mm 1:4 cement plaster on all exposed faces of walls
including top surface excavation & disposal of earth complete as per
approved design/drawing:

3.34.1 112mm drain,225mm Av. depth Mtr.

3.34.2 150mm drain,225mm Av. depth Mtr.
3.34.3 250mm drain,300mm Av. depth Mtr.

3.35 Construction of open Drain with 112mm thick brick masonry in CM 1:4
Semi circular S.W. glazed channel (confirming to IS Standards) fixed
with cement mortar 1:1 over a bed of 100mm thick C.C. 1:5:10, filling
of edged with M-15 grade C.C. flooring, 12mm cement plaster 1:4, over
all exposed faces, excavation & disposal of earth with in a lead of 50 mtr
complete as per approved drawings :

3.35.1 112 mm drain,225mm Av. depth width 10 Cm S.W. glazed channel. Mtr

3.35.2 150 mm drain,225mm Av. depth width 15 Cm S.W. glazed channel. Mtr.

3.35.3 250 mm drain,225mm Av. depth width 25 Cm S.W. glazed channel. Mtr.

3.36 Extra For additional 5 Cm. Average depth of drain of all sizes.
Mtr.

BSR_S3 [532]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.37 P & F precast dense cement concrete (Vibro-pressed) drain section
Block of different size as per approved drawing and design and strength
as per IS code 2185 part I of grade 'D' (5.00mm 2) proper quality of
additive/admixture like plasticizer etc. added to produce high quality and
durable drain section Blocks of 'L' shape 'U' shape etc. as per approved
design and drawing complete with fixing and joining in C.M.1:4 in
proper grade and level complete in all respect including earth work and
disposal of surplus earth within 0.5 Km. lead. (cost of Steel/ welded
mesh etc. shall be paid extra).

3.37.1 40mm thick Sqm.

3.37.2 Upto 60mm thick Sqm.
3.37.3 Upto 80mm thick Sqm.

3.38 Construction of Cement Concrete Chamber 125mm dia.

3.38.1 C.P. Brass grating Each

3.38.2 C.P. Brass doom grating Each
3.38.3 C.I. Grating Each
3.38.4 Stainless Steel Sheet Grating Each

3.39 Construction of Cement Concrete Chamber 125mm dia on depressed

floor upto 45cm height from floor with :

3.39.1 C.P. Brass grating Each

3.39.2 C.P. doom grating Each
3.39.3 C.I. Grating Each
3.39.4 Stainless Steel Sheet Grating Each

SPUN-CENTRIFUGALLY CAST IRON SOIL WATER PIPES:-

3.40 Providing & fixing Spun –Centrifugally cast Iron Pipes (IS : 3989
Mark ) of Approved make in wall or in floor with M.S. Holder bat
clamps in 10 X 10 X10 Cm. M-15 Grade concrete blocks, joints filled
with CM 1:4 with spun yarn including cutting holes and making good
the wall:-
3.40.1 75 mm dia Mtr
3.40.2 100 mm dia Mtr
3.40.3 150 mm dia Mtr

BSR_S3 [533]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

3.41 Providing & fixing Spun –Centrifugally cast Iron Pipes fitting (IS :
3989 Mark ) in CM 1:4 with spun Yarn.
3.41.1 75mm w/o door
(i) Offset Each
(ii) Socket Each
(iii) D/Door Y-Tee Each
(iv) Bend Each
(v) Door Cross Each
(vi) Cowel Each
(vii) Tee Each

3.41.2 100 mm –do-

(i) Offset Each
(ii) Socket Each
(iii) D/Door Y-Tee Each
(iv) Bend Each
(v) Door Cross Each
(vi) Cowel Each
(vii) Tee Each

3.41.3 150 mm –do-

(i) Socket Each
(ii) D/Door Y-Tee Each
(iii) Bend Each
(iv) Door Cross Each
(v) Cowel Each
(vi) Tee Each

3.41.4 75mm with door

(i) Bend Each
(ii) Door Cross Each
(iii) Tee Each

3.41.5 100mm with door

(i) Bend Each
(ii) Door Cross Each
(iii) Tee Each

3.41.6 150mm with door

(i) Bend Each
(ii) Door Cross Each

BSR_S3 [534]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(iii) Tee Each

3.42 Providing and Fixing Spun –Cast Iron floor trap (Nahani) of (IS :3989
Mark ) approved quality / make with socket down or hinged grating
including cutting and making good the floor :-
3.42.1 Size 100 x 100 mm Each
3.42.2 Size 100 x 75 mm Each

3.43 Add 10% extra Over Item No. 3.41 if the pipes are laid under suspended
condition under the roof.

UPVC SOIL WASTE & RAIN WATER (SWR ) PIPES

3.44 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR
Pipes Type B for sciland waste discharge system (IS:13592 : 1992
Marked) of approved quality /make
3.44.1 75 mm dia Mtr.
3.44.2 110 mm dia Mtr.

3.45 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR
Pipes fittings type B for sciland waste discharge system (IS:13592 :
1992 Marked) of approved quality /make
3.45.1 Coupler
(i) 75mm dia Each
(ii) 110mm dia Each

3.45.2 Repair Coupler

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.3 Single Push Fit Coupler

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.4 Bend 87.5 Dg.

(i) 75mm dia Each
(ii) 110mm dia Each

BSR_S3 [535]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.45.5 Bend 45 Dg.
(i) 75mm dia Each
(ii) 110mm dia Each

3.45.6 Door Bend 87.5 Dg.

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.7 Single 'Y'

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.8 Single 'Y' with Door

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.9 Double 'Y'

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.10 Double 'Y' with Door

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.11 Socket Plug

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.12 Pipe Clip

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.13 Double tee with Door

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.14 W.C. Connector

110mm dia Each

3.45.15 W.C. Connector (Bend) with ring

110mm dia Each

3.45.16 Single Tee

BSR_S3 [536]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(i) 75mm dia Each
(ii) 110mm dia Each

3.45.17 Single Tee with Door

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.18 Double Tee (4 Ways)

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.19 Multi floor trap

110mm dia Each

3.45.20 Offset
110mm dia Each

3.45.21 Extra Square Jali

110mm dia Each

3.45.22 Extra Round Jali

110mm dia Each

3.45.23 Extra 4 SWR Ring

(i) 75mm dia Each
(ii) 110mm dia Each

3.45.24 Gully Trap

110mm dia Each

3.45.25 Nahni Trap with Jali 4”

110mm dia Each

3.45.26 Nahni Trap without Jali 4”

110mm dia Each

3.45.27 Nahni Trap with Jali 3”

75 mm dia Each

3.45.28 Nahni Trap without Jali 3”

BSR_S3 [537]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
75 mm dia Each

3.45.29 Vent Cowel

75 mm Each

3.45.30 Vent Cowel

110mm dia Each

3.46 Providing & fixing Spun –Centrifugally cast Iron Pipes fitting (IS :
3989 Mark ) in CM 1:4 with spun Yarn 100mm w/o door as per
direction of Engineer-in-Charge.
(a) P Trap of standard size Each
(b) Long P Trap (900mm) Each
(c) Long P Bend Each
(d) Long Floor Trap (600mm) Each
3.47 Removing & Re fixing of S.C.I. Pipe and Spun Pipe with C.I.clip as per

direction of Engineer-in-Charge of following diameters :-

(a) 100mm dia Each
(b) 150mm dia Each

3.48 Cleaning of sewer line of various sizes as per requirement at site of Rmt
different sizes including 100mm,150mm & 225mm dia of Stoneware
pipe as per direction of Engineer-in-Charge.

3.49 Cleaning of C.I. Pipe Line of various sizse as per requirement at site of Rmt
different sizes including 100mm,150mm & 225mm dia of C.I.Pipes as
per direction of Engineer-in-Charge.

3.50 Repairing of Cement Concrete Chambers of different size as per Each

requirement at site and as per direction of Engineer-in-charge.

3.51 Providing & fixing Hubless Spun –Centrifugally cast Iron Pipes (IS :
15905 Mark ) of Approved make in wall or in floor with M.S. Holder
bat clamps in 10 X 10 X10 Cm. M-15 Grade concrete blocks, joints
filled with CM 1:4 with spun yarn including cutting holes and making
good the wall:-

BSR_S3 [538]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.51.1 75 mm dia Rmt
3.51.2 100 mm dia Rmt
3.51.3 150 mm dia Rmt

3.52 Providing & fixing Hubless Spun –Centrifugally cast Iron Pipes fitting
(IS : 15905 Mark ) in CM 1:4 with spun Yarn.
3.52.1 75mm w/o door
(i) Offset (130mm) Each
(ii) Shielded (SS) Coupling (With EPDM Rubber) Each
(iii) D/Door Y-Tee Each
(iv) Bend Each
(v) Cowel Each
(vi) Tee Each

3.52.2 100mm W/o door

(i) Ofset (130mm) Each
(ii) Shielded (SS) Coupling (With EPDM Rubber) Each
(iii) D/Door Y-Tee Each
(iv) Bend Each
(v) Cowel Each
(vi) Tee Each

3.52.3 150mm W/o door

(i) Shielded (SS) Coupling (With EPDM Rubber) Each
(ii) D/Door Y-Tee Each
(iii) Bend Each
(iv) Cowel Each
(v) Tee Each

3.52.4 75mm with door, bend Each

3.52.5 100mm with door

(i) Bend Each
(ii) Tee Each

3.53 Mechanised Cleaning of sewer line of diameter upto 200mm with the mtr
help of trolley mounted electrical driven machine having flexible steel
springs of length 20ft. Each which are rotated with the help of electric
motor and clutch assembly.

BSR_S3 [539]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.54 Mechanised sewer line Cleaning upto diameter 100mm with the help of mtr

PU coated glass fibre rod mounted on a wheel with brush attachment.

3.55 Mechanised Cleaning and desilting of manhole/sewer line chambers

With the help of mechanical bucket which gets open and close through
levers.
3.55.1 depth upto 0.5 mtr. Each
3.55.2 Depth upto 1.0 mtr. Each
3.55.3 Depth upto 2.0 mtr. Each
3.55.4 Depth upto 3.0 mtr. Each
3.55.5 Depth upto 5.0 mtr. Each

3.56 Suplying and Fixing Ductile iron Man Hole Covers/storm water grating Kg.
and gratingwith frame of various sizes weight and types and load
bearing capacity as per EN -124 ,superior quality or equivalent, comlete
as per Direction of Engineer In charge.

3.57 Providing and fixing circular air tight composite resin (FRP) manhole
cover without frame of approved brand with grade designation C-250
HD as per EN-124 standard. Manhole Cover shall have top abrasion
resistant layer conforming to IS-15658:2006 and permissible permanent
set value of 1.9mm after the application of 2/3 test load in five
continuous application as per EN-124, the testing shall be performed in
fully equipped and NABL certified test lab with random batch test (2%
of lot size) as per testing procedure stated in EN-124 standard including
fixing in existing manhole frame etc. complete in all respect as directed
by Engineer in Charge.
(i) Internal dia 0.56m Each

BSR_S3 [540]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.58 Providing and fixing circular air tight composite resin (FRP) manhole
cover without frame of approved brand with grade designation D-400
EHD as per EN-124 standard. Manhole Cover shall have top abrasion
resistant layer conforming to IS-15658:2006 and permissible permanent
set value of 1.9mm after the application of 2/3 test load in five
continuous application as per EN-124, the testing shall be performed in
fully equipped and NABL certified test lab with random batch test (2%
of lot size) as per testing procedure stated in EN-124 standard including
fixing in existing manhole frame etc. complete in all respect as directed
by Engineer in Charge.
(i) Internal dia 0.56m Each

3.59 Providing and fixing circular air tight composite resin (FRP) manhole
cover with frame of approved brand with grade designation C-250 HD
as per EN-124 standard. Manhole Cover & Frame shall have top
abrasion resistant layer conforming to IS-15658:2006 and permissible
permanent set value of 1.9mm after the application of 2/3 test load in
five continuous application as per EN-124, the testing shall be
performed in fully equipped and NABL certified test lab with random
batch test (2% of lot size) as per testing procedure stated in EN-124
standard including fixing with M-20 concrete etc. complete in all respect
as directed by Engineer in Charge.
(i) Internal dia 0.56m Each
(ii) Internal dia 0.60m Each

3.60 Providing and fixing circular air tight composite resin (FRP) manhole
cover with frame of approved brand with grade designation D-400 EHD
as per EN-124 standard. Manhole Cover & Frame shall have top
abrasion resistant layer conforming to IS-15658:2006 and permissible
permanent set value of 1.9mm after the application of 2/3 test load in
five continuous application as per EN-124, the testing shall be
performed in fully equipped and NABL certified test lab with random
batch test (2% of lot size) as per testing procedure stated in EN-124
standard including fixing with M-20 concrete etc. complete in all respect
as directed by Engineer in Charge.
(i) Internal dia 0.56m Each
(ii) Internal dia 0.60m Each
BSR_S3 [541]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

3.61 Providing and fixing rectangular air tight composite resin (FRP)
Manhole Cover with frame of approved brand with grade designation C-
250 HD as per EN-124 standard. Manhole Cover & Frame shall have
top abrasion resistant layer conforming to IS-15658:2006 and
permissible permanent set value of 1.9mm after the application of 2/3
test load in five continuous application as per EN-124, the testing shall
be performed in fully equipped and NABL certified test lab with random
batch test (2% of lot size) as per testing procedure stated in EN-124
standard including fixing with M-20 concrete etc. complete in all respect
as directed by Engineer in Charge.
(i) Internal Size 0.45 m x 0.60 m Each
(ii) Internal Size 0.45 m x 0.90 m Each
(iii) Internal Size 0.60 m x 0.90 m Each
(iv) Internal Size 0.90 mx 1.20 m Each

3.62 Providing and fixing rectangular air tight composite resin (FRP)
Manhole Cover with frame of approved brand with grade designation D-
400 EHD as per EN-124 standard. Manhole Cover & Frame shall have
top abrasion resistant layer conforming to IS-15658:2006 and
permissible permanent set value of 1.9mm after the application of 2/3
test load in five continuous application as per EN-124, the testing shall
be performed in fully equipped and NABL certified test lab with random
batch test (2% of lot size) as per testing procedure stated in EN-124
standard including fixing with M-20 concrete etc. complete in all respect
as directed by Engineer in Charge.
(i) Internal Size 0.45 m x 0.60 m Each

(ii) Internal Size 0.45 m x 0.90 m Each

(iii) Internal Size 0.60 m x 0.90 m Each
(iv) Internal Size 0.90 mx 1.20 m Each

BSR_S3 [542]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
3.63 Providing and fixing rectangular air tight composite resin (FRP) Grating
with frame of approved brand with grade designation C-250 HD as per
EN-124 standard. Grating with & Frame shall have top abrasion
resistant layer conforming to IS-15658:2006 and permissible permanent
set value of 1.9mm after the application of 2/3 test load in five
continuous application as per EN-124, the testing shall be performed in
fully equipped and NABL certified test lab with random batch test (2%
of lot size) as per testing procedure stated in EN-124 standard including
fixing with M-20 concrete etc. completein all respect as directed by
Engineer in Charge.
(i) Internal Size 0.45 m x 0.45 m Each
(ii) Internal Size 0.50 m x 0.60 m Each
(iii) Internal Size 0.60 m x 0.75 m Each
(iv) Internal Size 0.90 m x 0.60 m Each
(v) Internal Size 0.90 m x 0.90 m Each
(vi) Internal Size 1.20 m x 0.60 m Each

3.64 Providing and fixing rectangular air tight composite resin (FRP) Grating
with frame of approved brand with grade designation D-400 EHD as per
EN-124 standard. Grating & Frame shall have top abrasion resistant
layer conforming to IS-15658:2006 and permissible permanent set value
of 1.9mm after the application of 2/3 test load in five continuous
application as per EN-124, the testing shall be performed in fully
equipped and NABL certified test lab with random batch test (2% of lot
size) as per testing procedure stated in EN-124 standard including fixing
with M-20 concrete etc. complete in all respect as directed by Engineer
in Charge.
(i) Internal Size 0.45 m x 0.45 m Each
(ii) Internal Size 0.50 m x 0.60 m Each
(iii) Internal Size 0.60 m x 0.75 m Each
(iv) Internal Size 0.90 m x 0.60 m Each
(v) Internal Size 0.90 m x 0.90 m Each
(vi) Internal Size 1.20 m x 0.60 m Each

BSR_S3 [543]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-3
GE / DISPOSAL WORK

Rate (Rs.)
4

252.00
406.00
565.00
639.00
745.00
1044.00
1526.00

457.00
550.00
560.00
713.00
754.00
867.00
981.00
BSR_S3 [544]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1095.00

217.00
353.00
413.00
453.00
482.00
557.00
635.00
713.00

182.00
195.00
253.00

1150.00

1529.00

344.00
486.00

BSR_S3 [545]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
23.00
25.00

26.00
30.00
31.00

488.00
600.00
674.00
891.00
991.00
1550.00
1736.00
2229.00
2721.00
3744.00
4424.00

759.00
952.00
1228.00
2036.00

289.00
349.00

BSR_S3 [546]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
452.00

319.00
405.00
587.00
476.00

535.00
376.00
883.00
475.00
668.00
549.00
648.00

884.00
450.00
1230.00
561.00
915.00
662.00
706.00

1008.00
1133.00
1412.00

684.00
547.00

711.00

BSR_S3 [547]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
605.00

949.00
765.00

1979.00
1642.00

832.00
792.00
436.00

927.00

649.00

33.00

147
177
282
463

BSR_S3 [548]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
325
425

87
108
119

90
97
114

114
187
205

177
213
229

187
230
246

195
310
330

229
391
408

80

BSR_S3 [549]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
128
143

97
161
177

132
154
172

158
195
211

43
56
76

68
81
101

44
62
79

24
36
53

213

223

BSR_S3 [550]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

230

266

213

80

62

382

428

535

108

561

972
1487

BSR_S3 [551]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5489
206

1042

20016

703

BSR_S3 [552]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1049

455

2332

508

3299

529

3628
811

24135
22138
16100

6149
10397

BSR_S3 [553]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

5478
5160

99

399

27322

38499

59860

BSR_S3 [554]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
286

215

223

72

1355

2487

3906

4080

1357

329
292
219
502
421
319
99
81
73

BSR_S3 [555]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

271
284
380

435

502

876

35

BSR_S3 [556]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

418
518
634

167
177
152
171

237
263
218
237

1062
1299
2186

BSR_S3 [557]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

594
362
867
472
1187
432
670

809
519
1144
655
1272
539
895

1045
2628
1315
2409
1079
1964

552
777
722

728
1262
989

1509
2989

BSR_S3 [558]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
2164

1000
782

167
336

72
108

76
124

73
127

94
155

BSR_S3 [559]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

78
132

124
193

144
278

187
348

196
353

298
457

62
76

18
31

334
572

216

226

BSR_S3 [560]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
120
210

136
242

212
367

241

282

37

26

14
17

685

171

152

153

BSR_S3 [561]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
135

48

59

936
2695
923
1656

182
145

117

73

61

BSR_S3 [562]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
1128
1372
2240

562
460
597
300
383
400

780
502
1100
427
494
703

703
2047
902
1048
2024

408

652
890

154

BSR_S3 [563]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
107

98
182
339
491
781

182

11679.00

BSR_S3 [564]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

14598.00

13371.00
15070.00

16290.00
20910.00
BSR_S3 [565]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

12482.00
15751.00
23305.00
63342.00

16323.00

20515.00
27146.00
77173.00

BSR_S3 [566]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

11649.00
14950.00
22974.00
24533.00
40403.00
35564.00

15843.00
20635.00
30964.00
35167.00
50930.00
47550.00

BSR_S3 [567]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-4
TUBE WELL
Chapter
Description Unit
Code No
1 2 3

4.1 Construction of tube-well from ground level and upto 100 Meter depth

and above sizes in all types of soils in alluvium strata by “bailing”

method and without gravel packing as per IS: 2800 (Part - I& II) 1979

specifications (The work includes formation of cavity well at bottom by

development with appropriate air compressor or bailer pumping and also

lowering of casing pipe but excluding cost of the casing pipe. The tube-

well should have a throughout bore as per nominal bore of casing pipe.

The work would be completed after obtaining sand free water.)

4.1.1 100 mm dia Nominal bore. R Mtr.

4.1.2 125mm-do-. R Mtr.
4.1.3 150mm-do- R Mtr.

4.2 Construction of Tube-well upto 100 Meter depth and above in all type of

rocks by DTH system and over burden, to accommodate casing pipe of

following sizes in all types of soils and over burden including lowering

of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part

I & II) 1979 specifications. The work would be completed after

obtaining sand free water. The tube well should have a throughout bore

as per nominal dia of casing pipe:

4.2.1 100 mm dia Nominal bore. R.Mtr.

4.2.2 125mm-do-. R.Mtr.
4.2.3 150mm-do- R.Mtr.
4.2.4 200 mm –do- R.Mtr.

BSR_S4 [568]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.3 Construction of tube-well from ground levels and upto 100 Meter depth
and above to accommodate housing and assembly pipe of following
sizes in all types of alluvium strata by percussion/ rotary drilling method
and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -
& II) 1979 as amended upto date (the work includes the cost of gravel &
its primary packing and packing during development, lowering of
housing & strainer assembly pipes, with supply and wrapping of coir-
rope, wherever necessary, for arresting fine sand particles. The work
will not include cost of housing pipe and strainer pipe assembly and
development work, but work would be completed after obtaining sand
free water).
4.3.1 150 mm Nominal bore. R Mtr.
4.3.2 200mm –do-. R Mtr.
4.3.3 250mm –do-. R Mtr.

4.4 Development of tube well as per IS specification using suitable Hr.

compressor to give sand free water for required yield of the gravel
packed tube well.

4.5 Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of

grade Fe410 of following sizes at site of work.

4.5.1 100 mm Nominal bore of pipe Mtr.
4.5.2 125 mm Nominal bore of pipe Mtr.
4.5.3 150 mm Nominal bore of pipe Mtr.
4.5.4 200 mm Nominal bore of pipe Mtr.
4.5.5 250 mm Nominal bore of pipe Mtr.

4.6 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of
following sizes at the site of work including required size of slotting as
per IS:8110-1985.
4.6.1 150 mm Nominal Bore. Mtr.
4.6.2 200mm-do-. Mtr.
4.6.3 250mm-do-. Mtr.

BSR_S4 [569]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
4.7 Testing verticality of tube-well by plumbing system and yield test and Each

draw down test by pumping system as per IS: 2800 (Part II) 1979.

4.8 S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts
complete for casing size:

4.8.1 100mm dia Each

4.8.2 125mm dia Each
4.8.3 150mm dia Each
4.8.4 200mm dia Each
4.8.5 250mm dia Each

4.9 S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for Each

holding the riser pipe assembly of submersible pump set.

4.10 Supply of 50mm dia G.I. medium class pipe(each length 5.8 m to 6.0m) Each

tripod as per drawing and design with chain pulley of. 3MT capacity

4.11 Installation of submersible motor pump set in Tube-well/open well Each

complete ( labour charges only) including transportation of tripod, chain

pulley block & any other material required for lowering purpose.

4.12 P & F 60 cm. wide M.S. ladder in open well made of flat iron 32×5mm Mtr.

and 10mm dia bars @ 200mm c/c with angle iron hold fasts at suitable

interval complete as per drawing.

4.13 Installation of India mark II hand pump set, complete on existing plate Each
form.

4.14 Construction of 185 cm. dia platform as per approved design and Each
drawing of UNICEF.

4.15 Supplying of India mark II hand pump set complete marked with Each
cylinder and ten connecting rods etc. IS 1239

BSR_S4 [570]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.16 Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239 Mtr.
marked in 3m length including all accessories and fittings required for
installation of hand pump.

4.17 Supplying and installation of submersible pumping motor pump sets

I.S.I. Marked (IS : 8034-1989 ) of approved make like K.S.B.,
KIRLOSKAR, Calama etc. or equivalent, making connection suitable
for T.W./D.C.B./Open well. The job includes screwing and welding of
flanges on G.I. riser pipes, installation of complete fitting and
accessories, with riser pipes, jointing of electrical cables and other
connections making switch board electrical connections, all labour for
testing of submersible pump set and supply of water to water mains,
complete in all respect (Refer Electrical BSR )

4.18 For item of earthing refer to Electrical BSR .

4.19 For item of submersible cable refer to Electrical BSR.

4.20 for Item of panel board refer to Electrical BSR

4.21 ,
4.21.1 B Class 50 mm dia R. Mtr.
4.21.2 B Class 80 mm dia R. Mtr.
4.21.3 B Class 100 mm dia R. Mtr.

4.22 Un-lowering of submersible pump set with all piping from a tube-well/ Each Job
open-well complete (labour charge only ) including transportation of
tripod, chain, pulley-block and other materials required and lowering of
repaired/ new pump in the tube-well / open-well complete in all respect.

RAIN WATER HARVESTING

BSR_S4 [571]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
4.23 Construction of tubewell up to 100m depth and above to accomodate
housing and assembly pipe in all types of alluvium strata by rotay
drilling method with "code of practice for construction and testing of
tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both
amended up to date) with supply of bail plug if necessary.The work will
not include cost of housing pipe and strainer pipe assembly cost, gravel
and development work. Work would be deemed completed only after
obtaining sound free water during pumping.

4.23.1 150 mm nominal bore Rm

4.23.2 200 mm nominal bore Rm
4.23.3 250 mm nominal bore Rm

4.24 Construction of Recharge Shaft in filter pit including Earth work

Excavation , lifting excavted earth with all lift and 50 m lead and
centering & shuttering evenever required.
4.24.1 Diameter 900 mm Rm
4.24.2 Diameter 750 mm Rm

4.25 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of
M20 mix with 40 mm thickness
4.25.1 Diameter 900 mm Rm
4.25.2 Diameter 750 mm Rm

4.26 Supply & lowering air line of 25mm dia, G.I. pipe 'B' class having Rm
perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion &
making air vent at top including the cost of Tee-Nipples, Elbow, Socket
etc.

4.27 Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) Rm
mark class II (4kg per cm2 ) with required all necessary fittings
including perforation of 3 to 5 mm size all around the pipe at a distance
of 180 to 220mm in zig zag fashion and making air vent at top complete
as per direction of Engineer incharge.

4.28 Supply & lying River-gravels of following sizes in recharge shaft, filter
pit after screening & washing from kachha shift without deduction of
voids
4.28.1 Size 9 to 12 mm Cum
4.28.2 Size 3 to 5 mm Cum

BSR_S4 [572]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

4.29 Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, Cum
without deduction of voids.

BSR_S4 [573]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER : S-4
TUBE WELL
Rate (Rs.)
4

279.00
319.00
347.00

380.00
399.00
666.00
999.00

BSR_S4 [574]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1065.00
1464.00
1863.00

600.00

822.00
1023.00
1224.00
1728.00
2824.00

1527.00
2031.00
3126.00

BSR_S4 [575]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
8385.00

186.00
227.00
279.00
373.00
399.00

266.00

11979.00

3727.00

227.00

932.00

2928.00

8652.00

BSR_S4 [576]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

333.00

498.00
721.00
952.00

4659.00

BSR_S4 [577]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

799.00
1198.00
1597.00

266.00
233.00

766.00
666.00

300.00

154.00

1997.00
2928.00

BSR_S4 [578]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

3727.00

BSR_S4 [579]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-1
SUPPLY OF MANURE, INSCTICIDES, PLANTS,
POTS, T & P ETC.
The rates are inclusive of all taxes etc. and for estimation purpose only.
Note :

Chapter
Description Unit
Code No
1 2 3

Supply of dry manure including loading unloading,transportation &

1.1
stacking at site.
1.1.1 Farm yard manure(organic) Cum.
1.1.2 Compost Cum.
1.1.3 Goat dungmanure. Cum.
Vermi compost Per 50 kg
1.1.4
Bag
Neemcack Per 50 kg
1.1.5
Bag

Supply of Chemical Fertilizers at store in bags weighing not less than 50

1.2
kg each including loading unloading & transportation
Urea Per 50 kg
1.2.1
Bag
DAP Per 50 kg
1.2.2
Bag
Super Phosphate Per 50 kg
1.2.3
Bag
Murrate of Photash Per 50 kg
1.2.4
Bag
Straw Meal Per 50 kg
1.2.5
Bag
Bonemeal Per 50 kg
1.2.6
Bag
Calcium Nitrate Per 50 kg
1.2.7
Bag

Supply & Stacking good soil of earth at site complete including loading
1.3
unloading & Transportation etc.
1.3.1 Good soil of earth Cum.

Supply of insecticides & Pesticides at store in dust/liquid form complete.

1.4

H-1 [580]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Methyl Prathion 2% Per 25 kg
1.4.1
Bag

Karathion (Liquid)
1.4.2 Per 250 ml
1.4.3 Metacid(Liquid) Per Litre
1.4.4 Rogor(Liquid) Per Litre
1.4.5 Cholorophyriphos 20 Ec. Per Litre
Bauiston 50% Per 100
1.4.6
Grams

1.5 Supply of Garden Tools & implements at store complete.

1.5.1 Spade weighing 1.5kg with Handle Each
1.5.2 Khurpa weighing 500gm with Handle Each
1.5.3 Gurvana weighing 800 gm with Handle(Kamani Steel) Each
1.5.4 Hedge Shear(Kamani Steel) Each
1.5.5 Secaetur Each
1.5.6 Garden Rack with Handle Each
1.5.7 Pick Axe Each

Supply of different sized pots at site store including loading unloading &
1.6
transportation etc. complete.
1.6.1 Cement pot 300 mm size Each
1.6.2 Cement pot 350 mm size Each
1.6.3 Cement pot 375 mm size Each
1.6.4 Cement pot 450 mm size Each
1.6.5 Cement pot 525 mm size Each
1.6.6 Asbestos pot 350 mm size Each
1.6.7 Asbestos pot 400 mm size Each
1.6.8 Asbestos pot 450 mm size Each
1.6.9 Asbestos pot 600 mm size Each

Supply of different sized earthen pots at site/store including loading

1.7
unloading & transportation etc.complete
1.7.1 Earthen pot 150 mm size Each
1.7.2 Earthen pot 225 mm size Each
1.7.3 Earthen pot 300 mm size Each
1.7.4 Earthen pot 350 mm size Each
1.7.5 Earthen pot 225 mm size( Kundi shape) Each
1.7.6 Earthen pot 300 mm size( Kundi shape) Each
1.7.7 Earthen pot 350 mm size( Kundi shape) Each

H-1 [581]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Supply of different sized lawn mower including transportation etc. as
1.8
store complete.
1.8.1 300 mm size Hand Lawn Mower(Roller Type) Each
1.8.2 350 mm size Hand Lawn Mower(Roller Type) Each

1.8.3 450 mm size Hand Lawn Mower(Roller Type) Each

1.8.4 500 mm size Hand Lawn Mower(Roller Type) Each
1.8.5 600 mm size Hand Lawn Mower(Roller Type) Each
1.8.3 300 mm Electric Lawn Mower Each
1.8.4 350 mm Electric Lawn Mower Each
1.8.5 400 mm Electric Lawn Mower Each
1.8.6 450 mm Electric Lawn Mower Each
1.8.7 500 mm Electric Lawn Mower Each
1.8.8 Electric Lawn Mower sarfex 16 EL Each
1.8.9 Electric Lawn Mower sarfex 18 EL Each
1.8.10 Electric Lawn Mower sarfex 21 EL Each

Supply of different size Tokaras/Tokaries etc at store complete

1.9
1.9.1 Big size(600mm dia) Each
1.9.2 Small size(450 mm dia) Each
1.9.3 Jute Band( Ssutli) Per kg
1.9.4 Broom ( Bamboo) Per kg
1.9.5 Anti Bird Net Rmt
1.9.6 Shed Net 50% Sqm
1.9.7 Shed Net 75% Sqm
1.9.8 Shed Net 90% Sqm

Supply of PVC hose pipe of different sizes at store including

1.10
transportation etc. complete.
1.10.1 50 mm dia R/Mtr.
1.10.2 38 mm dia R/Mtr.
1.10.3 25 mm dia R/Mtr.
1.10.4 17 mm dia R/Mtr.
1.10.5 12.5 mm dia R/Mtr.

Supply of different varities of tree/shrubs/climbers according to height

1.11 and age of the plant at side including loading/unloading & transportation
etc.complete
1.11.1 Different flowering plants 900mm to1500mm Each
1.11.2 Different varieties of shrubs 600mm to 900 mm Each
1.11.3 Different varieties of climbers 900mm to 1500 mm Each

H-1 [582]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3

Supply of different varieties of bougainvillea in ply bags/earthen pot

1.12 according to height growth and age of plant at site including loading
unloading and transportation etc. complete
1.12.1 Local variety of bougainvillea 600mm to 900mm Each
1.12.2 Different varieties of bougainvillea 600mm to 900mm Each

Supply of different varieties of rose plants in poly bag/ earthen pot

1.13 according to height growth and age of the plant at site including loading
unloading and transportation etc. complete
1.13.1 Desi rose / root stock plant Each
1.13.2 Ganganagari rose plant in poly beg Each
1.13.3 Different varieties of grafted rose plants in poly bag Each
Different varieties of grafted rose plants in poly pot/earthen pot
1.13.4 Each

Supply of different varieties of palms in poly bags/earthen pot according

1.14 to height growth and age of plant at site including loading unloading and
transportation etc. complete
1.14.1 Raffish palm 2 to 2.2 feet Each
1.14.2 Deshi palm 2 to 3 feet Each
1.14.3 China palm 1 to 1.5 feet Each
1.14.4 Arica palm many branches 5 to 6 feet Each
1.14.5 Bottle palm 5 to 8 feet Each
Fox tale palm 5 to 8 feet
1.14.6 Each

Fish tale palm 5 to 8 feet

1.14.7 Each

T cycuss 3 feet 5 feet

1.14.8 Each

Supply of different varieties of indoor plants in poly bags/earthen pot

1.15 according to height growth and age of plant at site including loading
unloading and transportation etc. complete
1.15.1 Deshi crotons Each
1.15.2 Selective varieties of crotons 2 to 3 feet Each
Crotons Bangalore 1.5 to 2 feet
1.15.3 Each
1.15.4 Rubber plants etc Each
1.15.5 Arica palm Each
1.15.5 DAFFEN Bachia 1.5 to 2 feet Each

H-1 [583]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.15.6 Song of India 1.5 to 2.5 feet Each
1.15.7 Aglonmia 1.5 to 2 feet Each
1.15.8 Drassina 1 to 2 feet Each
1.15.9 Sin gonium with moss stick 2 to 3 feet Each
1.15.10 Cycussevelta 50mm to 75 mm dia Each
Furcaria gignita 50mm to 75 mm
1.15.11 Each

Different fycus plants tolairy 100mm to 125 cm height

1.15.12 Each

1.15.13 Different champa 125 cm to 215 cm height Each

Supply of different varieties of blubs including loading unloading and
1.16
transportation etc. complete
1.16.1 Supply of different varieties of caladium blubs Each
1.16.2 Supply of different varieties of amrilis lilly bulb Each
1.16.3 Supply of tube rose bulbs Each
1.16.4 Supply of hemaniths bulb Each
1.16.5 Supply of Asiatic Lilly bulb Each
1.16.6 Supply of oriental lilly bulb Each
1.16.7 Supply of different variety of gladioli bulb Each

Supply of flower Garlands & Flower petal’s including transportation at

1.17
site.(Complete)
1.17.1 Merigold Garland A Class ( Big flowers) 2 feet long Each
1.17.2 Merigold Garland B Class ( Small flowers) 1.5 feet long Each
1.17.3 Green Garland ( Ashok Leaf) 2 feet long Each
1.17.4 Rose Garland 1.5 feet long Each
1.17.5 Jalusi Garland( VIP A Class) Double fold Each
1.17.6 Jalusi Garland( VIP B Class) Single fold Each
1.17.7 Mogra Garland 1.5 feet long Each
1.17.8 Kunj Garland 1.0 feet long Each
1.17.9 Rose petal’s Per Kg.
1.17.10 Merigold petal’s Per Kg.
1.17.11 Crisenthimum petal’s Per Kg.
1.17.12 Chandine flower Per Kg.
1.17.13 Mogra Flower Per Kg.
1.17.14 Kunj Flower Per Kg.

Supply of Cut Flower at site including transportation Complete

1.18
1.18.1 Tata Rose Each
1.18.2 Carnation Each
1.18.3 Gladioli Each

H-1 [584]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.18.4 Tube rose single Each
1.18.5 Tube rose double Each
1.18.6 Ilium Asiatic Each
1.18.7 Ilium Oriental Each
1.18.8 An thorium Each
1.18.9 Arched Mix Each
1.18.10 Zarbera Each
1.18.11 Dasy Each
1.18.12 Chrysanthemum Each
1.18.13 Candytuft Each

1.18.14 Aster Each

1.18.15 Lotus Each
Supply of Flower Bucket & flower Bunch at site including
1.19
transportation ( Complete)
1.19.1 Flower Bunch / Bucket ( 20 Roses) Each
1.19.2 Flower Bunch / Bucket ( 30 Roses, Carnation) Each
1.19.3 Flower Bunch / Bucket ( 7 Lily & 15 Roses) Each
Flower Bunch / Bucket ( 10 Lily, 20 Roses & Carnation Mix)
1.19.4 Each
1.19.5 Flower Bunch / Bucket ( 15 Lily ) Each
1.19.6 Flat Flower Bucket ( 20 Mix Flower’s) Each
1.19.7 Flat Flower Bunch ( 25 Mix Flower’s) lily Carnation Rose Each
1.19.8 Flower Bunch / Bucket (Small 15 Flower Stic) Each
1.19.9 Flower Bunch / Bucket ( 10 Roses, 5 Carnation) Each
1.19.10 Flower Bunch / Bucket ( 15 Roses) Each

New Items
1.20 Hybrid Seasonal Plants of Flowring
1.20.1 In P.B many branches (7”X8”) Each
1.20.2 In Tray (100 Plants) Each
Fully developed many branches Daheliya plant in pots (12” Pot’s)
1.20.3 Each

Fully developed many branches Chrysanthemum(Guldaudi)

1.20.4 Plants Special varieties in pots (12” Pot’s) Each

1.20.5 Fully developed many branches Marigold in pots Each

1.21 Ground Cover of various varieties
1.21.1 Syngonium in P.B(7”X8”) - 6”-1’ Each
1.21.2 Ribbion grass P.B (7”X8”) - 6” Each
1.21.3 Lalsaggin P.B(5”X5”) - 6” Each
1.21.4 Lenthrain P.B - 6” Each

H-1 [585]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
1.21.5 Vadaliain P.B - 6” Each
1.21.6 Jade Plant in P.B(7”X8”) - 6” Each
1.21.7 Pendanus in P.B(9”X11”) - 1’ Each
1.22 Hedges of various varieties
1.22.1 Golden durantain P.B(5”X6”) - 6”-1’ Each
1.22.2 TecomaGoudichoudi in P.B(9”X11”) - 2’ Each
1.22.3 Enarmi in P.B(5”X5”) - 1’ Each
1.23 Diffrant varieties of Scented Plants
1.23.1 Mograin P.B(9”X11”) - 1’ Each
1.23.2 Gardenia in P.B(9”X11”) - 1’ Each
1.23.3 Juhiin P.B(9”X11”) - 1’ Each
1.23.4 Kunjin P.B(9”X11”) - 1’ Each

Madhukamini(Round Shaped dwarf variety)

1.23.5 in P.B(9”X11”) -1’ Each

1.23.6 Raat Rani in P.B(9”X11”) - 2’-3’ Each

1.24 Ornamental Plants of different varieties
1.24.1 Arucaria Plant in P.B(9”X11”) - 1½’- 2’ Each
1.24.2 Saplera variegated in P.B(9”X11”) - 1’-2’
1.24.3 Money Plant in P.B(9”X11”) - 1’ Each
Money Plant (with moss stick)
1.24.4 Each
In (12” Pot’s) - 2’-3’
1.24.5 Florodendon Plant in P.B(9”X11”) - 1’ Each
1.24.6 Florodendon Plant in round shape pot (12” Pot’s) 1½’- 2’ Each
1.24.7 Phonic Palm in P.B(15”x15”) - 2’-3’
Ixora Palm Many branches at flowring stage in P.B(12”X12”) - 2’-3’
1.24.8 Each
1.24.9 IxoraChinesisin Pot (8” Pot’s) - 6”-1’ Each
1.24.10 Silver Eucain P.B(9”X11”) - 1’-2’ Each
1.24.11 Umbrella Palm in P.B(9”X12”) - 2’ Each
1.24.12 Salem in Pot (12” Pot’s)- 2’ Each
Canna variegated, yellow, red and pink etc.
1.24.13 Each
In P.B(8”X8”) - 6”-1’
1.24.14 Geranium in P.B(9”X11”) - 1’ Each
Euphorbia Milii
1.24.15 Each
D.varietiesin P.B(12”X2”) - 1’-1½’
1.24.16 Kalanchoe of Different varieties in P.B(8”X8”) - 6”-1’ Each
Bamboo plant of Different varieties in P.B(12”X12”) - 2’-3’
1.24.17 Each
1.24.18 Bamboo plant of Different varieties P.B(14”X14”) - 4’-5’ Each
1.24.19 Nolinaplamin P.B(12”X12”) - 1’-2’ Each

H-1 [586]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
Mussaenda plant of many branches in P.B(12”X12”) - 1½’-2½’
1.24.20 Each
1.24.21 Different varieties of Ficus plant in P.B(9”X11”) - 2’ Each
1.24.22 Different varieties of Poinsettia in Fiber pot (10” Pot’s) – 1’ Each
1.24.23 Spathiphyllum (peace lily) in pot (8” Pot’s) - 6”-1’ Each
1.24.24 ThujaOrientalis plant (12” Pot’s) 1’-2’ Each
1.25 Different varieties of Shady plants
1.25.1 Height 5’-6’ (14”x14”) Many Branches Each
1.25.2 Height 7’-8’ (18”x18”)Many Branches state steam Each

H-1 [587]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-1
URE, INSCTICIDES, PLANTS,
TS, T & P ETC.

Rate (Rs.)
4

720.00
960.00
1200.00
250.00

1250.00

400.00

1500.00

350.00

450.00

1080.00

1800.00

2500.00

240.00

H-1 [588]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
500.00

600.00
444.00
325.00
400.00
120.00

175.00
90.00
108.00
720.00
360.00
192.00
180.00

150.00
216.00

120.00

18.00
30.00
43.00
125.00
30.00
45.00
125.00

H-1 [589]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

4320.00
4800.00

18000.00
20000.00
22000.00
25000.00
28000.00
30000.00
36000.00
40000.00

150.00
90.00
140.00
50.00
25.00
25.00
30.00
35.00

165.00
140.00
80.00
65.00
45.00

50 to 150
25 to 160
48 to 144

H-1 [590]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

25 to 60
60 to 120

40 to 50
80 to 125
84 to 102
200 t0 250

350.00
150.00
125.00
400 to 500
700 to 900
900 to 1200

900 to 1200

900 to 1200

50 to 60
72 to 180
250 to 2300
120 to 150

100 to 250

H-1 [591]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
100 to 200
110 to 175
100 to 240
125 to 250
1200
900 to 1000

800 to 1000

400 to 900

18.00
25.00
12.00
28.00
30.00
42.00
18.00

75.00
50.00
15.00
125.00
500.00
400.00
125.00
150.00
400.00
250.00
300.00
300.00
450.00
475.00

15.00
18.00
20.00

H-1 [592]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
12.00
15.00
75.00
125.00
75.00
40.00
20.00
25.00
20.00
4.00

6.00
40.00

500.00
700.00
950.00
1800.00
1650.00
490.00
1200.00
400.00
350.00
280.00

32.00
1000.00
150.00

125.00

125.00

60.00
50.00
12.00
12.00

H-1 [593]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
8.00
40.00
85.00

20.00
80.00
15.00

80.00
100.00
80.00
80.00

125.00

80.00

225.00
110.00
80.00
300.00
100.00
285.00
280.00
200.00
150.00
100.00
90.00
205.00
40.00
85.00
140.00
125.00
210.00
445.00
160.00

H-1 [594]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4
180.00
125.00
300.00
125.00
200.00

125.00
250.00

H-1 [595]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-2
MAINTENANCE OF GRADENS
The rates are inclusive of all taxes etc. and for estimation
Note :
purpose only.

Chapter
Description Unit
Code No
1 2 3

2.1 Maintenance of lawn

2.1.1 Spreading of manure , good earth in required thickness (cost

cub
of manure and good earth to be separately )
2.1.2 Irrigation of lawn Per hect. Per day
2.1.3 Uprooting weeds from the lawn plots and trenched area after
10 to 15 days of its flooding with including disposal of 100 sqm
uprooted vegetation

2.1.4 Moving manually / with power machines

(a) Manually Per hect
(b) with power machine Per hect

2.1.5 Maintenance of shrubbery or hedges cutting including

100 sqm
disposal of rubbish with all leads and lifts
2.1.6 Sweeping / cleaning of gardens roads lawns paths and
100sqm
disposal of all rubbish
2.1.7 Security of the garden per gate for 24 hours in 3 shift with the
Per day 24 hours
exilitary persons

2.1.8 Maintenance /fitting of permanent ornamental pots/ seasonal

pots
(a) Mixing earth and manure in per portion as specified or
cum
directed for pots
(b) Filling and planting of sapling and watering of pots
Per 100 pots per day

(c) Weeding hoeing stacking and coloring of pots material will

Per 100 pots per day
be supplied by the department

H-2 [596]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
2.1.9 Preparation of beds for budging and shrubbery by excavating
60cms. Deep and trenching the excavated base to a further
depth of 30 cms . refilling the excavated earth after breaking Each
clods and mixing with manure in ratio of 8:1 ( 8 part of
stacked volume )

2.2 Digging pits in ordinary soil and refilling the same with the
excavated earth mixed with manure in the ratio of 2:1 by
volume ( 2parts of stacked volume of earth after reduction by each
20% 1 part of stacked volume of manure after reduction by
8%) flooding wit
2.3 Planting of annual saplings watering in the bed sqm
2.4 watering of group plantation in bed sqm
2.5 Preparation of edging lawn Rmt
2.6 Group plantation in the bed at specified place sqm

H-2 [597]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-2
NANCE OF GRADENS

Rate (Rs.)
4

24.00

1440.00

240.00

1560.00
1200.00

480.00

3.50

19440.00

42.00

180.00

180.00

H-2 [598]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

24.00

24.00

2.40
0.30
0.72
2.40

H-2 [599]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-3
DEVELOPMENT OF GRADENS
Note : The rates are inclusive of all taxes etc. and for estimation purpose only.

Chapter
Description Unit
Code No
1 2 3

3.1 Laying of lawns including ploughing leveling breaking of clods

manuring and removal of stones etc. (cost of manure or extra good earth
to be paid separately )maintenance of lawn foe 30 days or more till the
grass forms a thick lawns free from weeds and fit for moving in the
duration of planting if lawn die some where the contractor will replant it
at his own cost
3.1.1 In rows 15 cm apart in either direction 100 sqm
3.1.2 in rows 7.5 cm apart in either direction 100sqm
3.1.3 in rows 5 cm apart in either direction 100 sqm
3.1.4 Laying of Selection No.1 grass tiles (2’X2’ size) for development of sqm

garden, including levelling of soil and spreading of manure

3.1.5 Maxican(Carpet) grass tiles (2’X2’ size) for development of garden, sqm
including levelling of soil and spreading of manure
3.1.6 Dugging of weedy soil from garden including loading and unloading of Cum
the soil and throwing it away out of the city

3.2 Renovating lawns including weeding cheeping the grass forking the 100sqm
ground top dressing with manure . Mixing the same with forked soil
watering maintaining the lawn for 30 days for till the grass forms a thick
lawns free from weeds and fit for moving in the duration of planting if
lawn die some where the contractor will replant it at his own cost

3.3 Planting of trees /shrubs/ hedge and climbers plants at desired distance 100 plants
in row and watering

3.4 Preparation of different sized bed as directed 100 sqm

H-3 [600]
 (Integrated Building BSR 2022 Rajasthan)

HAPTER H-3
PMENT OF GRADENS

Rate (Rs.)
4

3000.00
5500.00
6600.00
250.00

400.00

250.00

4500.00

30.00

456.00

H-3 [601]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-4
MAINTENANCE OF RODS SIDE PLANTATION
Note : The rates are inclusive of all taxes etc. and for estimation purpose only.

Chapter
Description Unit
Code No
1 2 3
4.1
Preparation of soil including cleaning & removing of unwanted shrubs Per 100
(a)
removal of stones & Garbage. Sqm
Digging of pits size 60x60x60 cms. Including removal of stones
(b) Manuring applicable of insecticides & watering atleast 15 litre per plant Per Pit
after plan ting.
Loading & unloading of plant from Deptt.Nursery to site per km. Per 1000
(c)
Plants
Preparation of Thavala sizing 60 cms. Diametre & 10 cms. Deep once in Per
(d)
a month. Thawala
Inter cultural operations hoeing & weeding etc. in 90 cms. Dia & 15
(e) Per Plants
cms. Deep.
Watering of plants with the own tanker i.e. at least 20 liter water for
(f) Per Plants
plant at one time
Transportation of tree guards from Depot to the plantation site including Per Tree
(g)
loading & unloading. Guard
Security of plants & fencing etc.
Per Plant
(h)
Per month

Prunning & trumming and cutting of old big trees on the road side The
(i) Per tree
contractor will deposit the cut wood in the Deptt.

Maintenace of Plants by the contractor including of pits/bids watering

preparation of Thavala Hoeing weeding etc. & application of Per Plant
4.2
insecticides etc. & security if the plant die during maintenance Per month
contractor has to replace same height plant at his own cost.

H-4 [602]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-4
OF RODS SIDE PLANTATION

Rate (Rs.)
4

150.00

30.00

150.00

1.20

2.00

1.40

18.00

0.90

120.00

18.00

H-4 [603]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-5
DETAIL OF PLANTATIONS AND MAINTENANCE OF PLANTS
ON ROAD SIDE FOR FIVE YEARS
Note : The rates are inclusive of all taxes etc. and for estimation purpose only.

Chapter
Description Unit
Code No
1 2 3

5.1 Supply & Planting of shady plants ( Neem. Peepal, Goolar, Jamun, Imli Per Plant

or other specified) along road side including the following activities:-

(i) Preparation of soil including cleaning & removing of unwanted shrubs
removal of stones & garbage.
(ii) Supply of plant at site of two years of age & height more than 1.50 Mtr.

(iii) Supply of dry manure(Farm yard manure organic)

(iv) Supply of Insecticides.
(v) Digging of pits size 60x60x60 cms. Including removal of stones.
Manuring application of insecticides & watering at least 1.5 Liter per
plant after planting
(vi) Half brick Circular tree guard in second class bricks, internal dia 1.25
meter and height 1.20 meter above ground and 0.20 meter above ground
and 0.20 meterr below ground. Bottom two courses laid dry and top
three couses in cement mortar 1:6 ( 1 Cement : 6 Sand) and the
intermediate courseses being in dry honey comb masonry. As per design
complete.
(vii) Watering to plants
(viii) Maintance of plants by the contractor including pits, preparation of
Thavala Hoeing weeding etc & application of insecticiedes etc. &
security. If the plant die during maintence contractor has to rplace same
heingh plant at his own cost.

5.2 Supply & Panting of ornamental plants ( Kachnar, Amaltas, Gulmohar, Per Plant
Arjun, Kala, Siris, Jacranda etc. or other specified) along road side
including the following activities :-
(i) Preparation of soil including cleaning & removing of unwanted shrubs
removal of stones & garbage
(ii) Supply of plant at site of two years of age & height more than 1.50 Mtr.

(iii) Supply of dry manure( Farm yard manure organic)

(iv) Supply of Insecticides

H-5 [604]
 (Integrated Building BSR 2022 Rajasthan)

Chapter
Description Unit
Code No
1 2 3
(v) Digging of pits size 60x60x60 cms. Including removal of stones.
Manuring application of insecticides & watering at least 1.5 liter per
plant after planting.

(vi) Half brick Circular tree guard in second class bricks. Internal dia 1.25
meter and height 1.20 meter above ground and 0.20 meter below
ground. Bottom two courses laid dry and top three courses in cement
morter 1:6(1 Cement : 6 Sand) and the intermediate courses being in dry
honey comb masonry. As per design complete.
(vii) Waterring to Plants.
(viii) Maintenance of plants by the contractor including pits. Preparation of
Thavala Hoeing weeding etc. & application of insecticides etc. &
security. If the plant die during maintencance contractor has to replace
same height plant at his own cost.

5.3 Planting & Maintenance of shrubs. Per Plant

Planting of shrubs in central verge
(i) Preparation of soil including cleaning & removing of unwanted shrubs
removal of stones & garbage.
(ii) Supply of plant at site like Bouganvillia & Kaner.
(iii) Supply of dry manure( Farm yard manure organic)
(iv) Supply of Insecticides
(v) Digging of pits size 60x60x60 cms. Including removal of stones.
Manuring application of insecticides & watering at least 1.5 liter per
plant after planting.
(vi) Waterring to Plants.
(vii) Maintenance of plants by the contractor including pits. Preparation of
Thavala Hoeing weeding etc. & application of insecticides etc. &
security. If the plant die during maintencance contractor has to replace
same height plant at his own cost.

H-5 [605]
 (Integrated Building BSR 2022 Rajasthan)

CHAPTER H-5
ONS AND MAINTENANCE OF PLANTS
SIDE FOR FIVE YEARS

Rate (Rs.)
4

1886.00

2198.00

H-5 [606]
 (Integrated Building BSR 2022 Rajasthan)

Rate (Rs.)
4

1069.00

H-5 [607]