INSTRUCTIONS AND INFORMATION

LANGENHOVEN HIGH SCHOOL •

•
This question paper consists of FOUR questions.
Answer ALL the questions.
• ALL drawings are in first-angle orthographic projection, unless otherwise stated.
• ALL drawings must be prepared using pencil and instruments, unless otherwise
stated.
• ALL answers must be drawn accurately and neatly.
• ALL the pages must be re-stapled in numerical sequence at the TOP LEFT
CORNER ONLY.
• Manage your time effectively and constructively to complete all the questions.
• Print your full name on the cover page as well as on the answer sheets of this
question paper.
ENGINEERING GRAPHICS AND DESIGN P1 • Any details or dimensions not given must be assumed in good proportion.

GRADE 10

NOVEMBER 2023

MARKS: 100 QUESTION DESCRIPTION MARK OBTAINED MODERATED

DURATION: 2 HOURS 1 ANALYTICAL 22

(CIVIL)
DATE: 06 NOVEMBER 2023 2 DESCRIPTIVE 18
GEOMETRY
EXAMINER: MR MHLANGA
3 SOLID 28
MODERATOR: MR CAVANAGH GEOMETRY
4 CIVIL 32
DRAWING
TOTAL 100

NAME: _______________________________ GRADE: 10/____

This question paper consists of 5 pages.

 QUESTION 1: ANALYTICAL (CIVIL)

Given:
The site plan of a proposed new dwelling, and a table of
questions. The drawing has not been prepared to the indicated
scale.

Instructions:
Complete the table below by neatly answering the questions,
which all refer to the accompanying drawing.
[22]

QUESTIONS ANSWERS
1 What is the project number? 1
2 Who prepared the drawing? 1
3 What is the date of the first 1
revision?
4 Name the feature at 1. 1
5 What must happen with the 1
existing garage labelled 2?
6 Name the feature at 3. 1
7 Name the feature at 4. 1
8 What SI unit is used for 1
dimensions?
9 How many new buildings have 1
been proposed on the stand?
10 How many inspection eyes are 1
shown on the drawing?
11 How many rodding eye are there? 1
12 What is the stand number to the 1
north-east?
13 Give the name of the street to the 1
south-west
14 What is the scale used for the site 1
plan?
15 In the space provided below (ANSWER 15),draw the FRONT VIEW and 8
TOP VIEW of the SANS 10143 graphical symbol for a BIDET.

TOTAL 22
ANSWER 15
2 2023-02-14 ADD MANHOLE TO
THE SEWERAGE
SYSTEM
1 2023-01-23 INCREASE WIDTH
OF DRIVEWAY
REVISION DATE
CLASSIC DESIGN
ARCHITECTS
495 CONCORD RD
CAPE TOWN
WWW.CLASDES.CO.ZA
PRINTED BY: DATE OF PRINT:

DUPLEX PRINTING 2023-02-24

DRAWING TITLE:
SITE PLAN
PROJECT:
PROPOSED NEW DWELLING AND OUT-BUILDING ON
STAND 8
PROJECT NUMBER: DRAWING NUMBER:
JBV-500W AAG-2323

DATE: DRAWN: CHECKED: SCALE:

2023-01-10 JOHN WAYNE 1:200
REFERENCE CODE:
Q1R-2023
QUESTION 2

2.1 DESCRIPTIVE GEOMETRY

2.2 DESCRIPTIVE GEOMETRY
Given:
Given:
▪ An INCOMPLETE front view and top view of a portion of a duct showing a square-to-square transition
▪ The front view and top view of a piece of wire AD which has been bent at B and C.
piece.
▪ X is the seam of the transition piece.
Instructions:
▪ Write down the total length of the wire (AD) in the space provided below.
Instructions:
[6]
▪ Complete the front view,
▪ Determine the true length of line AB,
AB =____mm
▪ Determine the true length of line CD.
▪ Determine the true length of the SEAM. CD =____mm
▪ Show ALL necessary construction. SEAM =____mm
▪ Show ALL hidden detail.
[12]

▪ Use the formula provided and substitute AD = AB + BC + CD

the values accordingly.
= ___ + ___ + ___

=____ mm

ASSESSMENT CRITERIA

ASSESSMENT CRITERIA 1 CONSTRUCTIONS 2

1 FRONT VIEW + HIDDEN DETAIL 2 2 TRUE LENGTHS (AB, BC,CD) 3

2 CONSTRUCTIONS 7 3 TOTAL LENGTH OF WIRE 1

3 TRUE LENGTHS (AB,CD, SEAM) 3 PENALTIES (-)
PENALTIES (-) SUB-TOTAL 6
SUB-TOTAL 12 PAGE 3
QUESTION 3: SOLID GEOMETRY

Given:
▪ The front view and auxiliary view of a right regular
hexagonal prism that is tilted towards the right.
▪ A cutting plan VT.

Instructions:
Draw, to scale 1:1 and in first-angle orthographic projection:
▪ The given front view,
▪ A sectional top view,
▪ A sectional right view,
▪ The TRUE SHAPE of the cut surface.

▪ Show ALL necessary construction.

[28]

ASSESSMENT CRITERIA
1 AUXILIARY VIEW 3
2 FRONT VIEW 3
3 SECTIONAL TOP VIEW 8½
4 SECTIONAL RIGHT VIEW 7
5 TRUE SHAPE 3½
6 CONSTRUCTIONS 3
PENALTIES (-)
TOTAL 28
PAGE 4
 QUESTION 4: CIVIL DRAWING

Given:
▪ The incomplete floor plan and incomplete
sectional elevation of a room showing the
foundation, walls and slab.
▪ The window, door and door frame profiles.

Instructions:
▪ Draw, to scale 1:40 and in first-angle
orthographic projection, a complete floor
plan with windows and a door. Project a
complete sectional elevation on the cutting
plane A-A.
▪ ALL drawings must comply with the
guidelines contained in the SANS 10143.

The drawing must include:

▪ All hatching detail according to the SANS
10143.
▪ All labels, scales and the abbreviations
DPC, NGL indicated in the correct view.
[32]

ASSESSMENT CRITERIA

FLOOR PLAN

1 WALLS 6½

2 DOOR+WINDOWS 5

3 HATCHING 1½

4 LABELS 1

5 NORTH-POINT 2

SECTIONAL ELEVATION

6 FOUNDATIONS+WALLS+SLAB 10½

7 HATCHING 4

8 LABELS 1½

PENALTIES (-)

TOTAL 32

PAGE 5