ccie voice study

A blog dedicated to professionals aiming to conquer the holy grail... Home Login Join About Downloads

Configuring Multicast MoH in CME Search

search
The multicast MoH command under telephony service can be a cause for confusion. This command forces the Cisco CME device to

generate multicast Music on Hold on the interfaces specified after the "route" argument.

The route argument is only required if the SCCP address bound under telephony service is different to the interface outbound Categories
towards the IP phones. This would be common, for example, if a loopback interface is used instead of the physical Ethernet interface.
Barge and Privacy
When the outbound interface is also the SCCP source IP address:
Billing
telephony ­ service Bulk Administration Tool
multicast moh 239.0.0.1 port 16834 Call Routing
When a loopback interface is used as the SCCP source IP address (for example, L0 = 172.16.1.1 and GigabitEthernet0/0 = 192.168.1.1):
Cisco Unity Express
telephony ­ service CME
multicast moh 239.0.0.1 port 16834 route 192.168.1.1 Conferencing

CME: Configuring Music on Hold Extension Mobility

Infrastructure
Posted on 2008‐12‐28 13:20:09 by alexccie | listed under CME, MoH Comments (0)
Intercom

MoH

Name (required) Presence

Mail (will not be published) (required) Quality of Service

Website RTMT

Text Security

SIP

SRST

System

Troubleshooting

User Features

Web Dialer

Add Comment >>

Twitter Updates

follow me on Twitter

Archive

February 2009

January 2009

December 2008

Blog Roll

blindhog.net

Chris Church's CCVP

CiscoTips

Should Have Gone With Cisco

The CCIE Journey

RSS Feeds
 RSS Feed

fast weight loss

b l e k a t nder buy
music online

(c) 2008 www.ccievoicestudy.com. Contact