Scribd
Upload
27 views1 page

PC Psu FSP500-60APN (85) : Description

Uploaded by

yupsshs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
27 views1 page

PC Psu FSP500-60APN (85) : Description

Uploaded by

yupsshs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PC PSU

FSP500-60APN(85)
DESCRIPTION
This specification describes a 500 watts power supply. With
+5V stand-by, second 12V rail and remote ON/OFF control
for ATX-12V system and a “Power factor collector (PFC )”
circuit to meet EPA requirement of input range with in
230V/50Hz.
APPLICATION
Desktop
W ATTAGE
Wattage: 500W SAFETY STANDARD APPAOVAL

DIMENSION
Dimension: 140mm(L) x 150mm(W) x
86mm(H) GENERAL SPECIFICATION
Efficiency: 82%@ 20% load; 85%@ 50% load;
PRODUCT HIGHLIGHT 82%@ 100% load
Efficiency Level: EU 230V 80Plus PWOK Delay Time: 500ms > PWOK > 100ms
Erp Lot: <0.5W EMC Performance: EN55022 class B
Input Voltage: 230V EN55024
EN 61000-3-2
INPUT SPECIFICATION EN 61000-3-3
Input Range: 200-240 Vac
Input Frequency: 47-63 Hz ENVIRONMENTAL SPECIFICATION
Input Current: 4Amp (maximum) at 230 TEMP.Range: Storage Temperature: -40°C to +
Vrms/ 50 Hz. . 70℃
MTBF: The power supply reliability, when
OUTPUT SPECIFICATION calculated by “Bellcore” latest
Output Rise Time: +3.3V 20mS (maximum) revision are exceed 100,000 hours
+5V 20mS (maximum) with all output at maximum load and
+12 V1 20mS (maximum) an ambient temperature of 25℃.
+12 V2 20mS (maximum)
-12 V 20mS (maximum) The special requirement is for
cooling fan that MTTF be guarantee
over 30,000 hours at 25℃ ambient
temperature.
*Output Voltage and C urrent Rating
+3.3V +5V +12V1 +12V2 -12V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 5mV 120mV 200mV 50mV
Regulation Load % ±5% ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 24A 20A 18A 18A 0.3A 2.5A
Output Min.(A) 0.5A 0.3A 0.5A 0.5A 0A 0A

NOTES
3.3V & +5V total output not exceed 120W.
When +5V is load to 20A, the +3.3V maximum load is 6A.
When +3.3V is load to 24A, the +5V maximum load is 8A.
+12V1 & +12V2 total output not exceed 408W

This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice

You might also like