0% found this document useful (0 votes)
4 views

68G5 Data Sheet

Uploaded by

tnpolicereport
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
4 views

68G5 Data Sheet

Uploaded by

tnpolicereport
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

68G5 3U OpenVPX Multifunction I/O Boards

3U OpenVPX Multifunction I/O Board


The 68G5 is NAI's latest rugged 3U OpenVPX multifunction I/O and communications board. It provides high-performance
I/O capabilities specifically designed for demanding aerospace, defense, and industrial applications. The board can
accommodate up to three NAI Configurable Open Systems Architecture™ (COSA®) smart function modules. By
configuring the 68G5 with these modules, engineers can tailor the board's functionality for specific application needs,
accelerating the deployment of SWaP-C optimized systems.

Features
3U OpenVPX Supports Three NAI smart I/O function Intelligent I/O library support included
Profiles Supported: modules Background Built-in-Test Continuous (BIT)
Module profile: COSA® architecture VICTORY Interface Services
MOD3-PER-1U-16.3.3-2 100+ modules to choose from (Contact factory)
Slot profile: Independent x1 SerDes interface to Operating Temperature
SLT3-PER-1U-14.3.3 each function module slot Commercial: 0°C to 70°C
Front and/or rear I/O 2x 10/100/1000 Base-T or Rugged: -40°C to 85°C
PCIe (x1) 1000Base-KX Ethernet; 2 to rear or
1 to rear and 1 to front I/O

68G5 Data Sheet North Atlantic Industries, Inc. 01-25-2024


Rev C3 www.naii.com Page 1 of 3
68G5 Data Sheet

Select up to 3 independent functions for your application


I/O Modules
Function Module Description Function Module Description

12 CH. A/D, ±10 V, Dedicated, 256 kHz (max), 4 CH. D/A, High-Voltage/High-Current Half-Bridge (2 Channels Full-
AD1 Digital-to-Analog DA5
Sigma-Delta Bridge) External VCC Sourced Outputs

12 CH. A/D, ±100 V (max), Dedicated, 256 kHz 16 CH. Differential I/O, Input: -10 V to +10 V (422), -7 V to +12 V
AD2 DF1
(max), Sigma-Delta (485) Output: -.25 V to +5 V
Digital IO - Differential Transceiver
12 CH. A/D, ±25 mA, Dedicated, 256 kHz (max),
AD3 DF2 16 CH. 16 Channel Enhanced Differential I/O
Sigma-Delta

16 CH. A/D, ± 10 V, Multiplexed, 500 KHz Agg / 8 24 CH. Discrete I/O, 0-60 VDC Input/Output, Max Iout 500 mA - 2 A,
AD4 DT1
Ch, SAR Source/Sink (out)
Analog-to-Digital
16 CH. A/D, ± 50 V, Multiplexed, 500 KHz Agg / 8 16 CH. Discrete I/O, ±80 V Input/Output, Max Iout 600 mA,
AD5 DT2
Ch, SAR Isolated/Ch Switch (out)

16 CH. A/D, ± 100 V, Multiplexed, 500 KHz Agg / 8 Discrete IO - 4 CH. Discrete Hi & Lo Side Switch Output @ 65V/2A (max),
AD6 DT3
Ch, SAR Multichannel,Programmable external individual supplied VCC & VSS per channel pair

16 CH. A/D, ±10 V, Individual 16-bit SAR, 200 kHz


ADE DT4 24 CH. Enhanced DT1
max., Simultaneous Sampling

16 CH. A/D, ±100 V, Individual 16-bit SAR, 200


ADF DT5 16 CH. Enhanced DT2
kHz max., Simultaneous Sampling

Chip Detector and Fuzz


CD1 6 CH. Chip Detector (CD) and Fuzz Burn (FB) RY1 4 CH. Relay, 220V/2A @ 60W/62.5VA (Max), Non Latching
Burn
Relay
12 CH. D/A, ± 10 V, 25 mA Per Channel, Current
DA1 RY2 4 CH. Relay, 220V/2A @ 60W/62.5VA (Max), Latching
or Voltage Control

16 CH. D/A, ± 10 V, 10 mA Per Channel, No


DA2 TL1 24 CH. TTL I/O, Standard Functionality, Programmable
Current Control
Digital-to-Analog Digital IO - TTL,CMOS
4 CH. D/A, ±40 V, ±100 mA, Voltage or Current
DA3 TL2 24 CH. TTL I/O, Enhanced Functionality, Programmable
Output

4 CH. D/A, ± 20 to ± 80, 10 mA, Voltage Control 8 CH. Variable Reluctance Signal Input and General-Purpose Pulse
DA4 Variable Reluctance VR1
Only Counter, ±100 V, 100 kHz (max)

Measurement & Simulation Modules


Function Module Description Function Module Description

2 CH. AC Reference Source, 47 Hz - 20 KHz, ± DSx 1 - 3 CH. Digital to Synchro/Resolver, 2 - 90 VLL, 2 - 1115 Vrms
AC2
3% Acc, 2 – 28 Vrms, 6 VA (Max/Ch) Power (DRx) Exc, 47 Hz - 20 kHz Freq
Synchro Resolver Measurement and
AC Reference
Simulation
2 CH. AC Reference Source, 47 Hz - 2.5 KHz, ± 4 CH. Synchro/Resolver to Digital, 2 - 90 Vrms Input, 2 - 115 Vrms
AC3 SDx
3% Acc, 28 – 115 Vrms, 6 VA (Max/Ch) Power Exc, 47 Hz to 20 kHz Freq

1 - 3 CH. Digital to LVDT/RVDT, 2 - 90 Vrms Full 2 CH. Pulse Timer 1-PPS &/or 10 MHz Input with Multiple Outputs
DLx Pulse Timer Receiver and Generator PT1
Scale, 2 - 115 Vrms Exc, 47 Hz - 20 kHz Freq and 2 Channels Isolated RS-422/485 Serial Communications

4 CH. LVDT/RVDT to Digital, 2-28 Vrms Input, 2- IRIG Timecode Receiver and
LD1 RG1 1 CH. IRIG Timing Function Interface
115 Vrms Exc, 47 Hz -1 KHz Freq Generator

4 CH. LVDT/RVDT to Digital, 2-28 Vrms Input, 2- 8 CH. Resistance Temperature Detectors (RTD), 2, 3, or 4 wire, 16
LD2 RT1
115 Vrms Exc, 1 KHz - 5 KHz Freq Bit Res, 16.7 Hz/Ch
LVDT RVDT Measurement
and Simulation
4 CH. LVDT/RVDT to Digital, 2-28 Vrms Input, 2- Thermocouple and RTD
LD3 TC1 8 CH. Thermocouple, 4.17 - 470 Hz, ±100 mV A/D
115 Vrms Exc, 5 KHz - 10 KHz Freq Measurement

4 CH. LVDT/RVDT to Digital, 2-28 Vrms Input, 2- 8 CH. Thermocouple (TCx) & Resistance Temperature Detectors
LD4 TR1
115 Vrms Exc, 10 KHz - 20 KHz Freq (RTD), programmable per channel

4 CH. LVDT/RVDT to Digital, 28-90 Vrms Input, 2- 4 CH. Strain Gauge, 4.7 Hz - 4.8 KHz, Measurement, Conventional
LD5 Strain Gauge Measurement SG1
115 Vrms Exc, 47 Hz - 1 KHz Freq 4-Arm Bridge

68G5 Data Sheet North Atlantic Industries, Inc. 01-25-2024


Rev C3 www.naii.com Page 2 of 3
68G5 Data Sheet

Communication Modules
Function Module Description Function Module Description

12 CH. ARINC 429, 100 KHz or 12.5 KHz, RX/TX, 256 Word Tx/Rx 2 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM Per
AR1 FTE
Buffer Channel, Direct Coupled
ARINC
MIL-STD-1553B
Communications
1 CH. ARINC 568 (CH-1, RX & TX) & 1 Channel ARINC 579 (CH-2, 4 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM Per
AR2 FTF
Programmable RX or TX), 1024-Word TX & RX Buffers per Ch. Channel, Direct Coupled

8 CH. CANBus, CAN 2.0 A/B, 16 K RX/TX Buffer, 1 Mb/s Max Data 1 CH. MIL-STD-1760 (1553), BC, RT, BM, BM/RT, 128 KB RAM,
CB1 FTJ
Rate Transformer Coupled
MIL-STD-1760
CANBus 2 CH. MIL-STD-1760 (1553), BC, RT, BM, BM/RT, 128 KB RAM Per
CB2 8 CH. CANBus, J1939, 16 K RX/TX Buffer, 500 kb/s Max Data Rate FTK
Communications Channel, Transformer Coupled

8 CH. CANBus, CAN 2.0 A/B (CB1) or J1939 (CB2) protocol layer
CB3 SC1 4 CH. Serial, RS-232/422/423 (MIL-STD-188C)/485, Non Isolated
programmable per channel

1 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM, 8 CH. (max) RS-232/422/485 Serial Communications or GPIO,
FTA SC3
Transformer Coupled Programmable, Non-isolated
Serial
Communications
2 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM Per 4 CH. RS-232/422/485 communications, isolated per channel and from
FTB SC5
Channel, Transformer Coupled SYS GND
MIL-STD-1553B
4 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM Per 4 CH. RS-232/422/485 communications, individual SYS GND provided
FTC SC6
Channel, Transformer Coupled per channel (non-isolated)

1 CH. MIL-STD-1553 (AMC), BC, RT, BM, BM/RT, 128 KB RAM, Direct
FTD
Coupled

Combination Modules
Function Module Description Function Module Description

2 CH. Dual-redundant MIL-STD-1553 & 8 Channel ARINC 429/575, 2 CH. Dual-redundant MIL-STD-1553 & 12 Channel Discrete I/O, 0-60
Combo CM5 Combo CM8
100 KHz or 12.5 KHz, RX or TX, 256 Word Tx/Rx Buffer VDC Input/Output, Max Iout 500 mA - 2 A, Source/Sink (out)

Architected for Versatility


NAI’s Configurable Open Systems Architecture™ (COSA®) offers a choice of over 100 smart I/O, communications, or Ethernet switch functions,
providing the highest packaging density and greatest flexibility of ruggedized embedded product solutions in the industry. Preexisting, fully-tested
functions can be combined in an unlimited number of ways quickly and easily.
One-Source Efficiencies
Eliminate man-months of integration with a configured, field-proven system from NAI. Specification to deployment is a seamless experience as all
design, state-of-the-art manufacturing, assembly and test are performed - by one trusted source. All facilities are located within the U.S. and
optimized for high-mix/low volume production runs and extended lifecycle support.
Product Lifecycle Management
From design to production and beyond, NAI’s product lifecycle management strategy ensures the long-term availability of COTS products through
configuration management, technology refresh and obsolescence component purchase and storage.

All specifications are subject to change without notice. All product and company names are trademarks or registered trademarks of their respective holders

68G5 Data Sheet North Atlantic Industries, Inc. 01-25-2024


Rev C3 www.naii.com Page 3 of 3

You might also like