Data Sheet

Hermetic filter drier

Type DML and DCL

For uniflow liquid line

All ELIMINATOR® driers have a solid core with

binding material held to an absolute minimum.

There are two types of ELIMINATOR® cores. Type

DML driers have a core composition of 100%
Molecular Sieve, while type DCL contain 80%
Molecular Sieve with 20% activated alumina.

ELIMINATOR® type DML driers are designed for

applications requiring the highest moisture
capacity.

ELIMINATOR® type DCL driers are designed for

applications requiring high moisture capacity
and acid adsorption capacity.

Available with solder (cu-plated steel

connectors) and flare connections.

For other connections please contact your

Danfoss Sales Representative.

AI192386435941en-001401
Hermetic filter drier Type DML and DCL

Features

The Core type DML

• 100% Molecular Sieve core
• High drying capacity minimizing the risk of acid formation (hydrolysis)

The Core type DCL

• 80% Molecular Sieve with 20% activated alumina
• Perfect core blend for systems that operate at high condensing temperatures and require high drying capacity

The Shell
• PED approved for PS 46 bar
• Available with solder (Cu-plated steel connectors) and flare connections
• Corrosion resistant powder-painted finish. Special coating for marine applications available upon request
• Allows installation with any orientation provided the arrow is in the flow direction
• Available in sizes 3 – 75 cubic inches

The Filter
• 25 μm (0.001 in.) filter provides high retention with minimal pressure drop
• Thermally stable up to 120 °C

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 2

Hermetic filter drier Type DML and DCL

Application

Intro-diagram
ELIMINATOR® Hermetic filter driers protect refrigeration and air-conditioning systems from moisture, acids, and solid
particles.

With these contaminants eliminated, systems are safer from harmful chemical reactions and from abrasive
impurities.

Figure 1: Application

R64-2107.10
Danfoss
AKS EKC
EVR

TCAE

SGN GBC
DML / DCL GBC

DML Filter drier

Recommended for use with R134a, R404A, R32,R410A,R407C, R23, R600, R600a,R1234yf, R1234ze, R407f,R290,
R452A,R444B, R449A, R448A and R450A refrigerants. Will not deplete oil additives

DCL Filter Drier

Recommended for use with Applicable to R22, R134a, R404A, R32,R410A, R407C, R23, R600, R600a,R1234yf, R1234ze,
R407f, R290, R452A,R444B, R449A, R448A and R450A refrigerants

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 3

Hermetic filter drier Type DML and DCL

Product specification

Technical data
Table 1: Technical data
Flare connection Solder connection(cu-plated steel connectors)

Table 2: Surface and volume

Filter drier volume (shell vol‐ Filter drier volume (net vol‐
Filter Solid core surface[cm2] Solid core volume[cm3]
ume)[l] ume)[l]
DML/DCL 03 82 29 0.08 0.051
DML/DCL 05 95 35 0.12 0.085
DML/DCL 08 131 56 0.17 0.114
DML/DCL 16 220 134 0.36 0.226
DML/DCL 30 378 256 0.72 0.464
DML/DCL 41 510 350 0.97 0.62
DML/DCL 60 756 513 1.34 0.827
DML/DCL 75 1019 702 1.81 1.108

Table 3: Acid capacity

Filter Acid capacity(1) [g]
DCL 03 0.5
DCL 05 0.8
DCL 08 1.3
DCL 16 2.9
DCL 30 6.1
DCL 41 8.3
DCL 60 12.2
DCL 75 16.6

(1)
Adsorption capacity of oleic acid at 0.05 TAN (Total Acid Number).
Temperature range:
-40 – 70 °C
Maximum working pressure:
PS 46 bar

Conversions
[1 kg of refrigerant × (Initial PPM of water − Final PPM of water)]
Drops of water =
50
See ARI standard 710-86 for recommended initial and final PPM values for different refrigerants.

Identification
Table 4: Identification
Type Codes Description
Filter drier D Drier
C 80% Molecular Sieve / 20% activated alumina
Solid core
M 100% Molecular Sieve core
Application L Liquid line

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 4

Hermetic filter drier Type DML and DCL

Type Codes Description

3 3 in.3
5 5 in.3
8 8 in.3
16 16 in.3
Size (volume) 30 30 in.3
38 38 in.3
41 41 in.3
60 60 in.3
75 75 in.3
2 1⁄4 in. / 6 mm
2.5 5⁄16 in. / 8 mm
3 3⁄8 in. / 10 mm
Connection (filter connection in 1⁄8 of an inch incre- 4 1⁄2 in. / 12 mm
ments) 5 5⁄8 in. / 16 mm
6 3⁄4 in. / 18 (19) mm
7 7⁄8 in. / 22 mm
9 11⁄8 in. / 28 mm
(blank) Flare connection
Connection type
s Solder connection

Example for type codes

D C L 05 3 s

D Filter drier
C Solid core
L Application
05 Size (volume)
3 Connection (filter connection in 1⁄8 of an inch increments)
s Connection type

Selection
Type selection is made considering the application

Table 5: Selection
Refrigerant and oil types DCL DML
HFO Recommended Recommended
HC (1) Recommended Recommended
Refrigerant
HFC Recommended Recommended
HCFC Recommended Recommended
Mineral or AB Recommended Recommended
Oil POE or PAG, pure Recommended Recommended
POE or PAG, with additives Not recommended (2) Recommended

(1)
Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable refrigerants now.
(2)
DCL Hermetic filter driers contain activated alumina, which is a polar material used for acid adsorption. Many oil additives are also polar
substances and can be adsorbed by the activated alumina, rendering them useless, and reducing the drier’s acid capacity, though this is not
harmful to the system.

Filter drier selection based on capacity calculation

Drier selection based on capacities and refrigerants, please refer to Coolselector®2. Rated and extended capacities
are calculated with the Coolselector®2 calculation engine to ARI standards with the ASEREP equations based on
laboratory measurements of selected valves.

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 5

Hermetic filter drier Type DML and DCL

Download Coolselector®2 for free at coolselector.danfoss.com.

Design
Table 6: Design
DML / DCL 03 DML / DCL 05

DML / DCL 08, DML / DCL 16 23Z22.11.13

DML / DCL 30, DML / DCL 41
Danfoss

DML / DCL 60, DML / DCL 75

1 Inlet 5 Perforated plate

2 Spring 6 Seal cap, flare connection
3 Solid core 7 Seal cap, solder connection
4 Polyester mat

The relatively large diameter of the hermetic filter drier means that the liquid flow velocity is suitably low and the
pressure drop minimal.

Powder formation is eliminated because the solid core grains are bonded and cannot move against each other.

Dimensions and weights

Flare connections

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 6

Hermetic filter drier Type DML and DCL

Type A A1 A2 L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 032 66 33 33 110 46 43 0.17
DCL / DML 033 66 33 33 123 46 43 0.19

Type A A1 A2 L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 052 75 24.5 50.5 119 58 54 0.24
DCL / DML 053 75 24.5 50.5 132 58 54 0.27

Type A A1 A2 L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 082 101 50.5 50.5 145 58 54 0.31
DCL / DML 083 101 50.5 50.5 158 58 54 0.35
DCL / DML 084 101 50.5 50.5 166 58 54 0.37
DCL / DML 085 101 50.5 50.5 175 58 54 0.4
DCL / DML 162 110 55 55 154 80 76 0.65
DCL / DML 163 110 55 55 167 80 76 0.67
DCL / DML 164 110 55 55 175 80 76 0.74
DCL / DML 165 110 55 55 184 80 76 0.74
DCL / DML 166 110 55 55 182 80 76 0.84

Type A L D1 D2 Net weight

[mm] [mm] [mm] [mm] [Kg]
DCL / DML 303 186 243 80 76 1.28
DCL / DML 304 186 251 80 76 1.32
DCL / DML 305 186 260 80 76 1.35
DCL / DML 306 186 258 80 76 1.45
DML 385 151 225 93 89 1.59
DCL / DML 413 187 244 93 89 1.79
DCL / DML 414 187 252 93 89 1.82
DCL / DML 415 187 261 93 89 1.87

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 7

Hermetic filter drier Type DML and DCL

Solder connection (cu-plated steel connectors)

23Z80.10
Danfoss

Type A A1 A2 B L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 032s 66 33 33 84 98 46 43 0.17
DCL / DML 66 33 33 85 101 46 43 0.16
032.5s
DCL / DML 033s 66 33 33 86 104 46 43 0.16
DCL / DML 034s 66 33 33 84 108 46 43 0.16
23Z81.10
Danfoss

Type A A1 A2 B L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 052s 75 24.5 50.5 93 107 58 54 0.24
DCL / DML 75 24.5 50.5 94 110 58 54 0.24
052.5s
DCL / DML 053s 75 24.5 50.5 95 113 58 54 0.23
DCL / DML 054s 75 24.5 50.5 97 117 58 54 0.24
DCL / DML 055s 75 24.5 50.5 101 125 58 54 0.26
23Z82.10
Danfoss

Type A A1 A2 B L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 082s 101 50.5 50.5 119 133 58 54 0.3
DCL / DML 101 50.5 50.5 120 136 58 54 0.3
082.5s
DCL / DML 083s 101 50.5 50.5 121 139 58 54 0.3
DCL / DML 084s 101 50.5 50.5 123 143 58 54 0.31
DCL / DML 085s 101 50.5 50.5 127 151 58 54 0.32
DCL / DML 162s 110 55 55 128 142 80 76 0.64
DCL / DML 110 55 55 129 145 80 76 0.64
162.5s

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 8

Hermetic filter drier Type DML and DCL

Type A A1 A2 B L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 163s 110 55 55 130 148 80 76 0.65
DCL / DML 164s 110 55 55 132 152 80 76 0.65
DCL / DML 165s 110 55 55 136 160 80 76 0.66
DCL / DML 166s 110 55 55 136 164 80 76 0.69
DCL / DML 167s 110 55 55 136 170 80 76 0.7

23Z83.10
Danfoss

Type A B L D1 D2 Net weight

[mm] [mm] [mm] [mm] [mm] [Kg]
DCL / DML 303s 186 206 224 80 76 1.28
DCL / DML 304s 186 208 228 80 76 1.26
DCL / DML 305s 186 212 236 80 76 1.27
DCL / DML 306s 186 212 240 80 76 1.3
DCL / DML 307s 186 212 246 80 76 1.32
DCL / DML 309s 186 196 250 80 76 1.37
DCL / DML 414s 187 209 229 93 89 1.84
DCL / DML 415s 187 213 237 93 89 1.85
DCL / DML 417s 187 213 247 93 89 1.88
DCL / DML 419s 187 197 251 93 89 1.9
DCL / DML 604s 337 359 379 80 76 2.98
DCL / DML 606s 337 363 391 80 76 2.21
DCL / DML 607s 337 363 397 80 76 2.21
DCL / DML 609s 337 347 401 80 76 2.32
DCL / DML 757s 338 364 398 93 89 3.1
DCL / DML 759s 338 348 402 93 89 3.1

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 9

Hermetic filter drier Type DML and DCL

Ordering

Type DCL Flare

Figure 2: DCL Flare
23Z8403
Danfoss

Table 7: DCL Flare

Type Connection size Multi pack Industrial pack for OEM only
[in.] [mm] Code no. Qty. Code no. Qty.
DCL 032 1⁄4 6 023Z5000(1)(2) 32 – –
DCL 032 1⁄4 6 023Z5075 (2) 32 – –
DCL 033 3⁄8 10 023Z5001(1) (2) 32 – –
DCL 033 3⁄8 10 023Z5089(2) 32 – –
DCL 052 1⁄4 6 023Z5002(2) 24 023Z8002(2) 16
DCL 053 3⁄8 10 023Z5003(2) 24 023Z8003(2) 16
DCL 082 1⁄4 6 023Z5004(2) 24 023Z8004(2) 16
DCL 083 3⁄8 10 023Z5005(2) 24 023Z8005(2) 16
DCL 084 1⁄2 12 023Z5006(2) 24 – –
DCL 162 1⁄4 6 023Z5007(2) 12 023Z8007(2) 12
DCL 163 3⁄8 10 023Z5008(2) 12 023Z8008(2) 12
DCL 164 1⁄2 12 023Z5009(2) 12 023Z8009(2) 12
DCL 165 5⁄8 16 023Z5010(2) 12 023Z8010(2) 12
DCL 166 3⁄4 19 023Z5011(2) 12 – –
DCL 303 3⁄8 10 023Z0012 8 – –
DCL 304 1⁄2 12 023Z0013 8 023Z3013 8
DCL 305 5⁄8 16 023Z0014 8 023Z3014 8
DCL 306 3⁄4 19 023Z0156 8 – –
DCL 414 1⁄2 12 023Z0102 8 – –
DCL 415 5⁄8 16 023Z0103 8 – –

(1)
Wire mesh in filter drier outlet
(2)
India make is available with code 023ZXXXX91

Type DML Flare

Figure 3: DML Flare
23Z8403
Danfoss

Table 8: DML Flare

Type Connection size Multi pack Industrial pack for OEM only
[in.] [mm] Code no. Qty. Code no. Qty.
DML 032 1⁄4 6 023Z5035(1) (2) 32 023Z8035 (1) (2) 28
DML 033 3⁄8 10 023Z5036 (1) (2) 32 023Z8036(1) 28
DML 033 3⁄8 10 023Z5090(2) 32 – –
DML 052 1⁄4 6 023Z5037(2) 24 023Z8037(2) 16
DML 053 3⁄8 10 023Z5038(2) 24 023Z8038(2) 16
DML 082 1⁄4 6 023Z5039(2) 24 023Z8039(2) 16
DML 083 3⁄8 10 023Z5040(2) 24 023Z8040(2) 16
DML 084 1⁄2 12 023Z5041(2) 24 023Z8041(2) 16
DML 085 5⁄8 16 023Z5073(2) 24 – –
DML 162 1⁄4 6 023Z5042(2) 12 023Z8042(2) 12
DML 163 3⁄8 10 023Z5043(2) 12 023Z8043(2) 12
DML 164 1⁄2 12 023Z5044(2) 12 023Z8044(2) 12
DML 165 5⁄8 16 023Z5045(2) 12 023Z8045(2) 12
DML 166 3⁄4 19 023Z5046 (2)
12 – –

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 10

Hermetic filter drier Type DML and DCL

Type Connection size Multi pack Industrial pack for OEM only
[in.] [mm] Code no. Qty. Code no. Qty.
DML 303 3⁄8 10 023Z0049 8 023Z3049 8
DML 304 1⁄2 12 023Z0050 8 023Z3050 8
DML 305 5⁄8 16 023Z0051 8 023Z3051 8
DML 306 3⁄4 19 023Z0193 8 023Z3193 8
DML 385 5⁄8 16 023Z0189 8 – –
DML 413 3⁄8 10 023Z0108 8 – –
DML 414 1⁄2 12 023Z0109 8 – –
DML 415 5⁄8 16 023Z0110 8 023Z3110 6
DML 416 3⁄4 19 023Z0195 8 023Z0210 6

(1)
Wire mesh in filter drier outlet
(2)
India make is available with code 023ZXXXX91

Type DCL Solder (cu-plated steel connectors)

Figure 4: DCL Solder
23Z8405
Danfoss

Table 9: DCL Solder

Type Conn. Size Multi pack Industrial pack for OEM Conn. Size Multi pack Industrial pack for OEM
only only
[in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty.
DCL 032s 1⁄4 023Z4501(1) 32 023Z4801(1) 28 6 023Z4500(1) 32 023Z4800(1) 28
DCL 032.5s 5⁄16 023Z4502(1) 32 023Z4803(1) 28 8 – – – –
DCL 033s 3⁄8 023Z4504(1) 32 – – 10 023Z4503(1) 32 – –
DCL 052s 1⁄4 023Z4506(1) 24 023Z4805 2) 16 6 023Z4505(1) 24 023Z4804(1) 16
DCL 052s 5⁄16 023Z4507(1) 24 – – 10 – – – –
DCL 053s 3⁄8 023Z4509(1) 24 023Z4807(1) 16 10 023Z4508(1) 24 – –
DCL 082s 1⁄4 023Z4511(1) 24 – – 6 023Z4510(1) 24 – –
DCL 082s 5⁄16 023Z4512(1) 28 – – 6 – – – –
DCL 083s 3⁄8 023Z4514(1) 24 023Z4811(1) 16 10 023Z4513(1) 24 023Z4809(1) 16
DCL 084s 1⁄2 023Z4516 (1) 24 023Z4813 (1) 16 12 023Z4515 (1) 24 – –
DCL 162s 1⁄4 023Z4518(1) 12 – – 6 023Z4517(1) 12 – –
DCL 163s 3⁄8 023Z4521(1) 12 – – 10 023Z4519(1) 12 023Z4814 12
DCL 164s 1⁄2 023Z4523(1) 12 023Z4815(1) 12 12 023Z4522(1) 12 – –
DCL 165s 5⁄8 023Z4524 (1)
12 023Z4816 (1)
12 12 – – – –
DCL 166s 3⁄4 023Z4525(1) 12 – – – – – – –
DCL 167s 7⁄8 023Z4526(1) 12 – – – – – – –
DCL 303s 3⁄8 023Z4528 8 023Z4817 8 10 023Z4527 8 – –
DCL 304s 1⁄2 023Z4530 8 – – 12 023Z4529 8 – –
DCL 305s 5⁄8 023Z4531 8 023Z4819 8 16 – 8 – –
DCL 306s 3⁄4 023Z4533 8 – – 18 023Z4532 8 – –
DCL 307s 7⁄8 023Z4534 8 023Z4820 8 22 – 8 – –
DCL 309s 11⁄8 023Z4536 8 – – 28 023Z4535 8 – –
DCL 414s 1⁄2 023Z4538 8 – – 12 – 8 – –
DCL 415s 5⁄8 023Z4539 8 – – 16 – 8 – –
DCL 417s 7⁄8 023Z4540 8 – – 22 – 8 – –
DCL 419s 11⁄8 023Z4542 8 – – 28 023Z4541 8 – –
DCL 604s 1⁄2 023Z4544 12 – – 22 – – – –
DCL 607s 7⁄8 023Z4545 6 – – 22 – – – –
DCL 609s 11⁄8 – 12 – – 28 023Z4546 6 – –
DCL 757s 7⁄8 023Z4548 12 – – 22 – – – –
DCL 759s 11⁄8 023Z4550 12 – – 28 023Z4549 12 – –

(1)
India make is available with code 023ZXXXX91

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 11

Hermetic filter drier Type DML and DCL

Type DML Solder (cu-plated steel connectors)

Figure 5: DML Solder
23Z8405
Danfoss

Table 10: DML Solder

Type Conn. Size Multi pack Industrial pack for OEM Conn. Size Multi pack Industrial pack for OEM
only only
[in.] Code no. Qty. Code no. Qty. [mm] Code no. Qty. Code no. Qty.
DML 032s 1⁄4 023Z4552(1) 32 023Z4822(1) 28 6 023Z4551(1) 32 023Z4821(1) 28
DML 032.5s 5⁄16 023Z4553(1) 32 023Z4823(1) 28 8 – – – –
DML 033s 3⁄8 023Z4555(1) 32 023Z4825(1) 28 10 023Z4554(1) 32 023Z4824(1) 28
DML 034s 1⁄2 023Z4556(1) 32 – – 12 023Z4557 32 – –
DML 052s 1⁄4 023Z4559(1) 24 023Z4849(1) 16 6 023Z4558(1) 24 023Z4826(1) 16
DML 052.5s 5⁄16 023Z4560(1) 24 – – 6 – – – –
DML 053s 3⁄8 023Z4562(1) 24 023Z4828(1) 16 10 023Z4561 28 023Z4827(1) 16
DML 054s 1⁄2 023Z4564(1) 24 – – 12 023Z4563(1) 12 023Z4845(1) 16
DML 055s 5⁄8 023Z4565(1) 24 023Z4838(1) 16 16 – – – –
DML 082s 1⁄4 023Z4567(1) 24 023Z4847(1) 16 6 023Z4566(1) 24 023Z4866(1) 16
DML 082.5s 5⁄16 023Z4568 24 – – 8 – – – –
DML 083s 3⁄8 023Z4570(1) 24 023Z4835(1) 16 10 023Z4569 24 023Z4839(1) 16
DML 084s 1⁄2 023Z4572(1) 24 023Z4829(1) 16 12 023Z4571(1) 24 023Z4840(1) 16
DML 085s 5⁄8 023Z4573(1) 24 – – 16 – – – –
DML 162s 1⁄4 023Z4575(1) 12 – – 6 023Z4574(1) 12 – –
DML 163s 3⁄8 023Z4578(1) 12 023Z4836(1) 12 10 023Z4577(1) 12 023Z4842(1) 12
DML 164s 1⁄2 023Z4580(1) 12 023Z4830(1) 12 12 023Z4579(1) 12 023Z4843(1) 12
DML 165s 5⁄8 023Z4581(1) 12 023Z4831(1) 12 16 – – – –
DML 166s 3⁄4 023Z4582(1) 12 023Z4832(1) 12 19 – – – –
DML 167s 7⁄8 023Z4583(1) 12 – – 22 – – – –
DML 303s 3⁄8 023Z4585 8 – – 10 023Z4584 8 – –
DML 304s 1⁄2 023Z4587 8 023Z4837 8 12 023Z4586 8 023Z4844 8
DML 305s 5⁄8 0023Z4588 8 023Z4833 8 16 – – – –
DML 306s 3⁄4 023Z4589 8 023Z4848 8 19 – – – –
DML 307s 7⁄8 023Z4590 8 023Z4834 8 22 – – – –
DML 309s 11⁄8 023Z4592 8 – – 28 023Z4591 8 – –
DML 414s 1⁄2 023Z4594 8 – – 12 023Z4593 8 – –
DML 415s 5⁄8 023Z4595 8 – – 16 – – – –
DML 417s 7⁄8 023Z4596 8 023Z4896 6 22 – – – –
DML 419s 11⁄8 023Z4598 8 023Z4898 6 28 023Z4597 8 – –
DML 604s 1⁄2 023Z4600 12 – – 12 023Z4599 12 – –
DML 605s 1⁄2 – – – – 18 023Z4601 6 – –
DML 607s 7⁄8 023Z4602 6 023Z4902 – 22 – – – –
DML 609s 11⁄8 023Z4604 12 – – 28 023Z4603 12 – –
DML 757s 7⁄8 023Z4605 12 023Z4905 4 22 – – – –
DML 759s 11⁄8 023Z4607 12 023Z4907 4 28 023Z4606 12 – –

(1)
India make is available with code 023ZXXXX91

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 12

Hermetic filter drier Type DML and DCL

Certificates, declarations, and approvals

The list contains all certificates, declarations, and approvals for this product type. Individual code number may have
some or all of these approvals, and certain local approvals may not appear on the list.

Some approvals may change over time. You can check the most current status at danfoss.com or contact your local
Danfoss representative if you have any questions.

Table 11: Certificates, declarations, and approvals

Document type Approval authority
Manufacturer declaration for PED/ROHS/ATEX Danfoss
UL certificate UL
EAC document EAC
Manufacturer declaration for china ROHS Danfoss

 WARNING:
Only solder versions (cu-plated / pure copper) and connection sizes below 25 mm are approved for flammable
refrigerants now.

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 13

 Online support

Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.

The Danfoss Product Store

The Danfoss Product Store is your one-stop shop for everything product related—no matter where
you are in the world or what area of the cooling industry you work in. Get quick access to essential
information like product specs, code numbers, technical documentation, certifications, accessories,
and more.
Start browsing at store.danfoss.com.

Find technical documentation

Find the technical documentation you need to get your project up and running. Get direct access to
our official collection of data sheets, certificates and declarations, manuals and guides, 3D models
and drawings, case stories, brochures, and much more.

Start searching now at www.danfoss.com/en/service-and-support/documentation.

Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.

Create your Danfoss Learning account for free at www.danfoss.com/en/service-and-support/learning.

Get local information and support

Local Danfoss websites are the main sources for help and information about our company and
products. Find product availability, get the latest regional news, or connect with a nearby expert—all
in your own language.

Find your local Danfoss website here: www.danfoss.com/en/choose-region.

Coolselector®2 - find the best components for you HVAC/R system

Coolselector®2 makes it easy for engineers, consultants, and designers to find and order the best
components for refrigeration and air conditioning systems. Run calculations based on your operating
conditions and then choose the best setup for your system design.

Download Coolselector®2 for free at coolselector.danfoss.com.

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its
products without notice. This also applies to products already on order provided that such alterations can be made without subsequential
changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and
the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

© Danfoss | Climate Solutions | 2021.03 AI192386435941en-001401 | 14