Scribd
Upload
48 views

MasterGlenium ACE 456

Uploaded by

Mujtaba Rabah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views

MasterGlenium ACE 456

Uploaded by

Mujtaba Rabah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MasterGlenium® ACE 456

Essential component of ZERO ENERGY SYSTEM – A new generation of high-performance


polycarboxylate ether (PCE) superplasticizers for the Precast industry.

DESCRIPTION  Improved surface appearance.


MasterGlenium ACE (Admixture Controlled  Durable precast concrete elements as per EN
Energy) 456 consists of a range of innovative 206-1.
superplasticizers based on newly developed  Elimination of the energy required for placing,
polycarboxylate ether polymers. The particular compaction and curing.
molecular configuration of MasterGlenium ACE  Optimization of the curing cycles by reducing
456 accelerates the cement hydration by curing time or curing temperature.
exposing increased surface of the cement grains  Increased productivity.
to react with water. As a result, it is possible to
obtain earlier development of the heat of PACKAGING
hydration, rapid development of the hydration MasterGlenium ACE 456 is available in bulk,
products and, as a consequence, higher containers, drums or cans.
strengths at very early age. The polymer
structure of MasterGlenium ACE 456 is
STANDARDS
specially designed to improve the rheology of
precast concrete, making it very flowable and MasterGlenium ACE 456 meets the
low viscous even at very low water/cement requirements of EN EN934-2 and ASTM C494
ratios, without increasing stickiness. Robustness Type A, E & F.
is a distinctive feature of the precast concrete
produced with MasterGlenium ACE 456. TECHNICAL DATA / TYPICAL PROPERTIES*

FIELDS OF APPLICATION Appearance and Form Whitish to light


Brownish liquid
MasterGlenium ACE 456 is suitable for making
Specific gravity @ 25°C 1.060 typical
precast concrete elements with highly-fluid pH-value @ 25°C 4-7
concrete without segregation but low water Chloride ion content ≤ <0.01%
cement ratio and, consequently, high early and Alkali content (Na2O equivalent %) < 3%
final strengths. MasterGlenium ACE 456 may
be used in combination with MasterMatrix for
DIRECTIONS FOR USE
producing advanced self-compacting concrete
like Smart Dynamic Concrete (SDC, latest V- MasterGlenium ACE 456 is a liquid admixture
type SCC), without the aid of vibration, for to be added to the concrete during the mixing
economic, ecological and ergonomic precast process. The best results are obtained when the
production. admixture is added to the mixing water that is
used for the concrete mix after all the other
components are already in the mixer and after
FEATURES & BENEFITS
the addition of at least 80% of the total water.
MasterGlenium ACE 456 offer the following The water content is adjusted to obtain the
benefits for the precast concrete industry: desired consistence or workability.
 Production of highly flowable, robust self-
compacting concrete having a low water
cement ratio along with an optimal rheology.
 Enhanced robustness and consistency in
concrete quality with low stickiness.
 Environmentally friendly, CO2 reduced mix-
design optimization.
 Elimination of heat curing.
MasterGlenium® ACE 456
Optimal water reduction is obtained if the If stored in unopened containers according to
MasterGlenium ACE 456 is poured into the manufacturer’s instructions, the shelf life is 1
concrete mix right after the addition of the initial year.
80-90% of mixing water. Avoid adding the
admixture to the dry aggregates. After adding The occurrence of a surface layer with
MasterGlenium ACE 456 admixture provide MasterGlenium ACE 456 is normal and will
enough mixing time to secure a homogenous have no effect on the performance of the
dispersion. Continue mixing and adjust the water product.
content to obtain the required workability.
HANDLING & STORAGE
DOSAGE RATE No special requirements must be observed while
The recommended dosage rate is 0.3 to 2.0 the product is used. Protection gloves and
liters per 100 kg of the binder. glasses are recommended. Do not eat, drink or
Other dosages may be used in special cases smoke during the application. MasterGlenium
according to specific production conditions. In ACE 456 is not-flammable, non-toxic or irritant
this case please consult our Technical Services and are not subject to special transport
Department. requirements.

COMPATIBILITY NOTE
MasterGlenium ACE 456 is compatible and Field service, where provided, does not
recommended for use with: constitute supervisory responsibility. For
 MasterMatrix to modify the viscosity of additional information contact your local BASF
SCC. representative.
 MasterAir, air entraining admixture, to BASF reserves the right to have the true cause
improve freeze-thaw resistance (exposure of any difficulty determined by accepted test
class XF1 to XF4, EN 206-1) methods.
 MasterFinish, demoulding agent for easy
formwork removal and improved finish. QUALITY AND CARE
 MasterKure, curing compound for highly All products originating from BASF’s Dubai, UAE
efficient water retention and friendly use. facility are manufactured under a management
system independently certified to conform to the
MasterGlenium ACE 456 is not compatible requirements of the quality, environmental and
with all admixtures of MasterRheobuild series. occupational health & safety standards ISO
9001, ISO 14001 and OHSAS 18001.
STORAGE
MasterGlenium ACE 456 must be stored in a * Properties listed are based on laboratory controlled tests.

place where the temperature does not drop ® = Registered trademark of the BASF-Group in many countries.
below 5°C. In case of freezing, warm up and
homogenise the admixture solution before using.
BASF_CC-UAE/Gl_ACE456_11_08/v1/03_14
The technical information and application advice given in this BASF publication are based on the present state of
STATEMENT OF our best scientific and practical knowledge. As the information herein is of a general nature, no assumption can be
RESPONSIBILITY made as to a product's suitability for a particular use or application and no warranty as to its accuracy, reliability or
completeness either expressed or implied is given other than those required by law. The user is responsible for
checking the suitability of products for their intended use.

Field service where provided does not constitute supervisory responsibility. Suggestions made by BASF either
NOTE orally or in writing may be followed, modified or rejected by the owner, engineer or contractor since they, and not
BASF, are responsible for carrying out procedures appropriate to a specific application.

BASF Construction Chemicals UAE LLC Disclaimer: the LRQA mark relates
P.O. Box 37127, Dubai, UAE to certified management system and
Tel: +971 4 8090800, Fax: +971 4 8851002 not to the product mentioned on this
www.master-builders-solutions.basf.ae datasheet

You might also like