PAVAN SRIKANTH KADALI

Ho. No:49-1-59/1, C/o Tekumudi Krishna, Santhi Nagar, Ramachnadrapuram,Andhra

Pradesh, INDIA, 533255 | IND: +919010039157| IND: +919000727622
Passport No: Z4765657
[email protected] | https://www.linkedin.com/in/pavan-srikanth-918402164/

CARRIER OBJECTIVE:
An enthusiastic to get a job in a progressive standard organization. Where I can brush my shoulders with the
best Engineering minds, using cutting/edge technology in your expectations, where my skills will be utilized.

EXECUTIVE SUMMARY:

• My 3 years of experience in Engineering Service have taught me a great core & fundamental engineering
skills. The ability to solve problems and collaborate with others is an essential part of the role.
• My three years’ experience areas are in the Manufacture and Research Developer for One Year,
Designer and Plant Manager In Textile Industry for One Year and Pipping Engineer at present and still
continuing.
• I also have experience in Fabrication, Material Hardening, Structural Analysis, 3D printing, etc.
• Working with different companies made me explore the different regions like Manufacturing, designer,
Safety Manager, Quality Checker, Inventory Controller etc.
• I also worked as a Piping Design Engineer at Avineon India Private Limited, Hyd for 6 months, started as
Junior trainee, and was promoted to Junior Pipping Engineer.
• I also trained myself in different design tools like AutoCAD, SP3D, PDS, etc. Where I am good at the
basics level.
• I am a strong candidate for this mechanical engineering position. I always have passion for mechanical
engineering, which means I have the desire to overcome and exceed what is needed.

TECHNICAL SKILLS:

• Done developing and testing Induction motors, Ovens, Boilers, Turbines, Compressor from starch by using
Industrial wastes.
• Good at studying P&IDs and their functions and also good at suggesting the best solution while placing it
with clear details.
• God at reading Chats gauges to record and maintain voltage and electric flow. Checking equipment and
indicators to detect evidence of operation problem and coming up with a solution to it.
• Planned, Designed & developed a Plastic brick by the waste of cities usages for social welfare cause by
using Injection Moulding.
• Familiar with metal hardening techniques like Heating, Cooling, Shot peening, Solidification, Soaking, etc.
• A good Track record in maintaining daily work flow with systemic tracking by using software Skills like
Excel record, SAP, etc.
• Operated and Maintenance of plant at high pressures
• Familiar with all Safety Hazards and also had 6 months of Experience in maintaining a textile plant by
updating sheet and records weekly under the plant premises
• Basic knowledge and experience in prevention of corrosion and study of Corrosive material
• Development of critical spare management and inventory cost control
• Adequate knowledge in Engineering Graphics and skills in drafting spares and developing in Auto Cad.
• Establish and reinforce maintenance and safety procedures
• Work with planning and design teams to drive product development and review tooling specifications.
• Knowledge in correct selection of spare parts while raising purchase request and to alter the models for
right functionality and cost reducing.
• Plan workforce use, space requirements, and equipment layouts to optimize workflows. 10% increased
workflow in year one.
• Strong Mechanical and Technical aptitude.
• Knowledge of proper selection of spare parts when procuring purchase requests and changing models
• Ability to work for long durations and perform physically enduring tasks.
• Good at identifying problem and solving with high detailing and accuracy.
• Make efforts to reduce unnecessary use or wastage of energy develop something usable from it.
• Experience in stopping, operating, and troubleshooting in an emergency situation.
• Maintain good relationships with colleagues and subordinates
• Managed and coordinated fabrication and installation activities to ensure products and systems conform to
engineering design and quality specifications.
• Good at Client and customer interaction, with good presentation Skills.
• Good at Lathe design and develop solutions using Computer-aided technology were used for cutting edge
requirement.
• Handful Knowledge on water harvesting, basic process on water purification like Boiling, Chlorination,
Reverse Osmosis (RO), Distillation and storage techniques.
• Handling and Responsibility of Utility Equipment and Machinery such as Air Compressors and Boilers
Cold air dryer system, forklift, and Nitrogen generation system. (By replacing the necessary spare parts in
Regular intervals.
• Preparing daily break down reports and analysis, Monthly maintenance expenditure reports, utility
consumption report, MIS report and attending management review meetings with other departments.

EXPERIENCE:
Power Plant Operator Engineering: May 2021 – Present
Saudi Electric Corporation
As an Operation Engineering my role is to check, troubleshooting, controlling over GT, Generator, Pumps,
Electric grids, pressure pumps and motors and etc. I also Simulated and worked with different kinds of engine
like Siemens Frame No:06, and General Electric Frame 5,6,7 and still improving my industrial knowledge.

Piping Engineer Sep 2021 – April 2022

Avineon India Private Limited, Hyderabad
My 6 months’ time period as a Trainee I was greatly focused towards Pipping Modelling and designing skills by
using SP3d and PDS Micro Station software's, and successfully completed 80% of the plant review modelling
with my team with a success rate of 90%. I used to often interact with my colleague and quite friendly with my
Teams leads. I never had a bad interaction with them throughout my project.

Inventory Manager Jul 2020 - Aug 2021

Sri Devi Textile Industries, Vijayawada
As a small-scale industry, I was engaged into multiple Units such a Designer, Manufacture, Analysis, Quality
inspector, Waste Management, Customer Support, etc. where ever the requirement needed I used to fill the
work, where it led me to work with effectively and efficiently under any circumstances.

Junior Research Fellowship Aug 2019 - May 2020

IIT Bhubaneswar, Odisha
On a project titled “Improved Surface hardness of bus body panels: A simple route based on Shot-peening”. The
Project was sponsored by NALCO where I worked for 10 months. I learnt and gained hands-on-experience on a
variety of experimental techniques such as grinding and polishing of metals, Vickers Micro-hardness
measurements, Optical microscopy, scratch testing using pin on disk tribometer, etc...
Worked as a Manufacture based on my report and analysis in my research and applied for thesis approval
waiting for the acceptance.
Project Internship May 2018 - Jul 2018
Afcons Infrastructure Limited, Chennai
Learnt about TBM Machine, Planning Process where the company needs, As a intern, I was engaged to different
units for every week such as Safety manager, Production planner, Inventory Controller, Material check, Quality
Analyst, site Constructor, etc. and updated detailed in my work report.

Internship May 2017 - Jul 2017

Bharat Heavy Electricals Limited, Visakhapatnam
Learnt about Production Control, Management Prepared, Conducted and Process Layout detailed. Under the
guide lines of Engineering rules.

EDUCATION:
Bachelor of Technology (B.Tech.) - Mechanical Engineering Jun 2015 - Apr 2019
Gitam (Deemed to be University), Visakhapatnam, Graduated with a CGPA of 7.12 on a 10 scale.

PROJECT WORK AND SUMMARY:

Project Name: - Thermal Analysis of Disc Brake
Disc brake model and analysis is done using ANSYS workbench. The main purpose of this study is to analysis
the thermomechanical behaviour of the dry contact of the brake disc during the braking phase. The coupled
thermal-structural analysis is used to determine the deformation and the stress established in the disc for the both
solid and ventilated disc with two different materials to enhance performance of the rotor disc. A comparison
between analytical and results obtained from FEM is done and all the values obtained from the analysis are less
than their allowable values. Hence best suitable design, material and rotor disc is suggested based on the
performance, strength and rigidity criteria.

SOTWARE & SKILLS:

Intermediate In: AutoCAD, Automated model Programming, SP3D, Excel, Word, Machine Fabrication,
Basic In: Solid works, PDS, Engineering product data management,
Critical Thinking, Listening, Empathy, Patience, Good at teaching Kids, A person with Positive attitude…...

STRENGTH:
• Good Leadership Qualities
• Can work in any pressures
• Positive Thinking
• Good at Communication and Team Work

LANGUAGES KNOWN:
Telugu, Hindi, English, Germany (Deutsch) A1Level

HOBBIES / INTEREST:
My Hobbies are being in shape hitting gym every day, Improving my Knowledge, Learning new
things, Puzzle solving, Indoor and Outdoor Games, Cooking Food, Teaching home tuitions class
from 1-12th, Travels new Places in search of Tradition, Testing Mechanical engines.
DECLARATION:

Things those are likely to impress you, which I mentioned above. Best to be as honest as possible, I
hereby declare that the details furnished above are true.

Thanking You,

KADALI PAVAN SRIKANTH,

Date: 05/28/2022.