M12

Z178.720-5===

Technical drawing
M12
 M12

Technical data

1. Characteristics

Réf.no. Description U.M. Valeur

1.01 Model number Z178.720-5===
1.02 Model name M12
1.03 Manufacturer Zallys
1.04 Operator Pedestrian
1.05 Power unit Electric
1.07 CE certification
1.08 Plant tension V 24
1.09 Nominal power kW 0,50

1. Frame characteristics

Réf.no. Description U.M. Valeur

1.80 Frame made of Steel
1.81 Basic process Sandblasting
1.82 Anti-Corrosion Treatment (on customer demand only) Zinc primer
Polyester powder
1.83 Frame treatment
coating

2. Safety data

Réf.no. Description U.M. Valeur

2.02 Emergency reverse button On tiller head
Detachable power
2.06 Power supply disconnection device / Emergency stop
connector
2.10 Acoustic signaling Beeper
2.11 Drive controls Maintained action switch
2.20 Handarm vibration m/s² <2,5
2.22 Noise level at operator’s ears dB <70

3. Performances

Réf.no. Description U.M. Valeur

3.01 Max. forward speed km/h 5,0
3.04 Max. backward speed km/h 5,0
3.17 Max. towing capacity on wheels ** kg 1.500
3.28 Max.slope with load * % 15
 M12
Réf.no. Description U.M. Valeur
3.36 Max towing force at hook ** N 900
3.39 Stopping distance in deceleration (without load) m 1,3
3.42 * Load capacity is subject to kind of slope , kind of floor and operating time
** While the force expressed in N at the hook remains unchanged, the
following circumstances may affect the towing capacity expressed in KG :
3.44
type of ground on which the towing is performed, the use (or not) of ballasts
and type of wheels mounted on the vehicle and on the trailer

4. Drive controls

Réf.no. Description U.M. Valeur

4.01 Type of control Tillerhead
4.02 Type of start control Butterfly lever
5 speed button
4.04 Speed control assembled on the tiller
head

5. Standard battery specifications

Réf.no. Description U.M. Valeur

5.01 Batteries 2
5.02 Batteries type Traction AGM batteries
5.03 Battery voltage V 12
5.04 Nominal Capacity 5 h Ah 28
5.05 Nominal Capacity 20 h Ah 36
5.06 Weight of each battery kg 10
5.10 Weight of battery pack kg 23

5. Optional battery specifications

Réf.no. Description U.M. Valeur

5.11 Batteries pcs 2
5.12 Batteries type Traction AGM batteries
5.13 Battery voltage V 12
5.14 Nominal Capacity 5/h Ah 35
5.15 Nominal Capacity 20/h Ah 45
5.16 Weight of each battery kg 14
5.20 Weight of battery pack kg 37

5. Optional battery specifications

 M12
Réf.no. Description U.M. Valeur
5.21 Batteries 1
5.22 Batteries type Traction - Lithium
5.23 Battery voltage V 24
5.24 Nominal Capacity k5 Ah 40
5.26 Weight of each battery kg 12
5.30 Weight of battery pack kg 13

6. Available chargers

Réf.no. Description U.M. Valeur

6.41 Multitension V 110/240
In use in the country of
6.42 Plug
destination

6. Technical data of standard charger

Réf.no. Description U.M. Valeur

External - high
6.01 Battery charger
frequency
6.02 Input voltage V 230
6.03 Input Frequency Hz 50-60
6.04 battery charger voltage type Monophase
6.05 Battery charger capacity Ah 4
6.06 Power consumption during complete charge cycle kWh 1
6.07 Operating temperature °C -20 / +40
6.08 Operation display Led
6.09 Input fuse A 5
6.10 Cooling system Ventilation cooling
6.11 IP degrees of protection IP20
6.12.1 Width mm 95
6.12.2 Length mm 185
6.12.3 Height mm 55

7. Drive motor

Réf.no. Description U.M. Valeur

7.02 Motor code no. M055.701V
7.03 Engine Electric
7.04 Electricity Direct current
7.05 Engine voltage V 24
7.06 Rating (S2 - 5') kW 0,4
7.15 Maximum peak power kW 1,60
 M12
8. Generic technical data

Réf.no. Description U.M. Valeur

8.01 Transmission system Mechanical
8.02 Transmission lubrication In oil bath
8.03 Gear reduction 1:26
8.04 Kind of oil 80W-90
8.06 Service brake Electronic
8.08 Parking brake Electro-Mechanical

9. Weight

Réf.no. Description U.M. Valeur

9.01 Weight without batteries kg 50
9.04 Weight incl. 28/36A AGM batteries kg 73
9.05 Weight incl. 37/45A AGM batteries kg 87
9.16 Weight incl. 40A Lithium battery kg 80

10. Dimensions

Réf.no. Description U.M. Valeur

10.01 Length mm 700
10.02 Width mm 535
10.03 Height of start control mm 1.256
10.14 Wheelbase mm 341
10.15 Turning circle m 0,90
10.50 **For further details please click on technical draws

11. Standard wheels

Réf.no. Description U.M. Valeur

11.01 Drive wheels 2
11.03 Pivoting wheels no. 1
11.05 Tyres Pneumatic
11.07 Drive wheels type Turf tires
11.11 Pivoting wheel type Smooth non-marking
11.13 Drive tyres size 13-5.00-6"
11.17 Pivoting wheel size Ø 125 X 40
11.25 Inflation pressure bar 1.2

11. Optional wheels

 M12
Réf.no. Description U.M. Valeur
Super-elastic non-
11.42 Tyres
marking wheel
11.43 Kind of tyres Turf tyres
11.44 Drive tyres size 4.00-4"