AESSEAL ®

such
they
To gi
v
excep
need
OUR

e
tiona
altern never con
VISI

our c
l
ustom
s
ON

ervic
ers
e tha
t
ative s
sourc ider

Single Spring Component Seal Range C

suppl

Mana .J. Rea

ging
Direc
y.
es of

tor

Type B01 Type B02/12/13 Type B03/B03U Type B04/B04U

Enclosed rubber bellows seal for use Single Spring enclosed bellows seal. Single Spring enclosed bellows seal used Low pressure general application seal
where space for a seal is limited. Main Most commonly found in submersible most commonly in engine water pump manufactured in large quantities to cover
feature is the short working length. pumps along with seats type S01, S02, applications. Main feature is the ability of a limited range of shaft sizes.
S03 & S040. one size to fit various shaft sizes due to
the clearances between the shaft and
seal components.

Type B06 Type B05/52/53 Type B05/52/53S Type B05/52/53SL

Phenolic impregnated carbon rotary Single Spring enclosed bellows seal with As BO5/52/53 but complete with ‘O’ ring As BO5/52/53 but complete with ‘O’ ring
boot mounted seat to DIN-EN 12756 seat mounted DIN long seat.

Type BO seals
faced seal running against Ni-resist seat mounted DIN short seat.
face ‘O’ ring mounted. Used on housings, with a choice of working
Macerator duties. lengths to suit common international
standards.

Type B07 Type B07S Type B02D

Single Spring enclosed bellows seal with As BO7 but complete with ‘O’ ring
Type B07SL Machine specific seals found extensively
boot mounted seat to DIN-EN 12756. As BO7 but complete with ‘O’ ring in Food Process, Dairy and Brewery
mounted DIN short seat.
mounted DIN long seat. Industries.

Type C01 Type C02 Type C03

Clamp ring or Lock ring for setting Single As CO1 but is to be used in conjunction As CO1 but is to be used in conjunction
Spring seal working length in with PO8. with PO8.

Type CO lock rings applications that are not pre set.

Type BP02 Type BP04 Type BP05 Type BP06

Single Spring enclosed bellows seal with Single Spring enclosed bellows seal with Single Spring enclosed bellows seal with Special non shaft fretting seal
boot mounted seat. Dimensionally boot mounted seat to suit common

Type BPO seals

boot mounted seat to suit common arrangement for use in specific machines
interchangeable with P02. American standards. Dimensionally American standards. Dimensionally found extensively in Food Process, Dairy
interchangeable with P04. interchangeable with P05. and Brewery Industries.

Type M01 Type M01S Type M02 Type M02S

Multiple sprung, grub screwed rotary seal Multiple sprung, grub screwed rotary seal Multiple sprung, grub screwed, balanced Multiple sprung, grub screwed, balanced
with PTFE wedge secondary seal with ‘O’ ring secondary seal member. rotary seal with PTFE wedge secondary rotary seal with ‘O’ ring secondary seal
member. seal member. member.

Type M04 Type M04S

Type M03 Type M03S
Multiple sprung, grub screwed, balanced, Multiple sprung, grub screwed, balanced,
Multiple sprung, grub screwed DIN rotary Multiple sprung, grub screwed DIN rotary
DIN rotary seal with ‘O’ ring secondary

Type MO seals
DIN rotary seal with PTFE wedge
seal with PTFE wedge secondary seal seal with ‘O’ ring secondary seal
secondary seal seal member.
member. member.

Type M05S Type M06 Type M06S

Type M05
Multiple sprung, grub screwed Thin Multiple sprung, grub screwed, balanced Multiple sprung, grub screwed, balanced
Multiple sprung, grub screwed Thin
Profile rotary seal with ‘O’ ring secondary Thin Profile rotary seal with PTFE wedge Thin Profile rotary seal with ‘O’ ring
Profile rotary seal with PTFE wedge
seal member. secondary seal member. secondary seal member.
secondary seal member.

Type P02 Type P02T

Type P01 Type P01T As PO2 but with Thin Profile where
Single Spring rubber diaphragm seal with Single Spring rubber diaphragm seal with
As PO1 but with Thin Profile where standard P02 outside diameter is too
boot mounted seat used widely and boot mounted seat used widely and
standard P01 outside diameter is too large.
capable of long service life. capable of long service life.
large.

Type P04 Type P04T Type P05

Type P03 Single Spring rubber diaphragm seal
Single Spring rubber diaphragm seal As PO4 but with Thin Profile where
Single Spring rubber diaphragm seal with
similar to Type P02 but offering different standard P04 outside diameter is too similar to Type P01 but offering different
rubber boot mounted seat to DIN-EN
seat housing and working length large. seat housing and working length
12756 seat housings. Available with two
dimensions. Found extensively in dimensions. Found extensively in
additional seat designs S05 & S06 all to
American manufactured equipment. American manufactured equipment.
DIN-EN 12756.

Type PO seals Type P05T Type PO6

Type P07
Type P08
Single Spring ‘O’ ring mounted rotary and
As PO5 but with Thin Profile where Single Spring ‘O’ ring mounted rotary
Machine specific seals found extensively seat. Mainly for use in marine, textile and
standard P05 outside diameter is too available with a choice of seats and other
in Food Process, Dairy and Brewery compressor applications.
parts. For use in specific machines found
large. Industries.
extensively in Food Process, Dairy and
Brewery Industries.

Type P080 Type P09

Single Spring ‘O’ ring mounted rotary and Machine specific seals found extensively
seat. Mainly for use in marine, textile and in Food Process, Dairy and Brewery
compressor applications. Industries

Type S01 Type S02 Type S03 Type S04

‘O’ ring mounted seat available in ‘O’ ring mounted DIN long seat available ‘O’ ring mounted DIN short seat available Boot mounted seat available in ceramic
ceramic and silicon carbide. Used in ceramic and silicon carbide. Offering in ceramic and silicon carbide. Offering and silicon carbide and is used in type
extensively with rotary type B02. an alternative axial dimension to type S05 an alternative axial dimension to type S06 P03 complete seal.
seats. Used extensively with rotary type seats. Used extensively with rotary type
B02. B02/12/13.

Type S040 Type S05 Type S07/S070

Type S06 ‘O’ ring mounted seat ‘H’ configuration.
Boot mounted seat available in ceramic ‘O’ ring mounted DIN long seat to DIN-EN
‘O’ ring mounted DIN short seat to DIN-
12756 available in ceramic and silicon Used as an alternative to boot mounted

Type SO seats
and silicon carbide. This seat offers EN 12756 available in ceramic and silicon
another option for running against the carbide. seats with P01/P02/P04/P05 rotaries.
carbide.
type B02/12/13 rotary.
.

Type S08 Type S09 Type S010

PTFE Gasket-mounted Clamped ‘T’ ‘L’ shaped seat available in silicon DIN long seat to DIN-EN 12756 available
shaped seat. Available in ceramic.. carbide complete with PTFE sealing-ring in silicon carbide complete with PTFE
sealing-ring.

Type T01 Type T01 DIN Type T01F Type T02

Tapered spring ‘O’ ring mounted DIN Machine specific seals found extensively Tapered spring ‘O’ ring mounted seal of
Tapered spring ‘O’ ring mounted seal
standard seal with DIN long seat. in Food Process, Dairy and Brewery similar design to type T01 but fitted with
used in applications needing a high PV
Suitable for various duties by means of a Industries. a stainless rotary face running against a
value face combination.
choice of face materials carbon seat.

Type T03 DIN Type T04 Type T04 DIN

Type T03 Tapered spring ‘O’ ring mounted seal with Tapered spring ‘O’ ring mounted seal with Tapered spring ‘O’ ring mounted seal with
stainless rotary and carbon seat as

Type TO seals
Tapered spring ‘O’ ring mounted seal with pressed stainless steel head, ceramic pressed stainless steel head, ceramic
stainless rotary and carbon seat as standard. Available in other face rotary face and carbon seat. rotary face and carbon seat. Designed to
standard. Available in other face combinations. To suit DIN-EN 12756 suit DIN-EN 12756 housings.
combinations. Suitable for a wide range housing. Suitable for a wide range of
of duties. duties as T03.

Type T05 Type T0R Type T0W/T0WD Type T0WP

Machine specific seal range designed for Machine specific seals found extensively Machine specific seals found extensively Machine specific seals found extensively
use in FLYGT® submersible pumps and in Food Process, Dairy and Brewery in Food Process, Dairy and Brewery in Food Process, Dairy and Brewery
mixers. We have an extensive range to Industries. Industries.
Industries.
T05 seals, please request the T05 series
brochure for more details.

Type W02 Type W03 Type W04

Type W01
Wave sprung grub screwed Thin cross Wave sprung grub screwed Thin cross
Wave sprung grub screwed Thin cross Wave sprung grub screwed Thin cross
section short working length mechanical section short working length mechanical
section short working length mechanical section short working length mechanical

Type WO seals seal. Most commonly used on twin lobe

pumps found extensively in Food
Process, Dairy and Brewery Industries.
seal complete with DIN long seat. seal. Most commonly used on twin lobe
pumps found extensively in Food
Process, Dairy and Brewery Industries.
seal. Most commonly used on twin lobe
pumps found extensively in Food
Process, Dairy and Brewery Industries.

Type B02K Type SAIH Type S0Z

Special variants of B02 Type seal Type S0E
Machine specific double tandem seal Mechanical seal used in industrial
available in four sizes, 22/28/38 and Machine specific double seal found
arrangement for use in submersible cookers. For use in specific machines

Machine Specific 48mm. Supplied as complete seal extensively in the water treatment
pumps. found extensively in Food Process, Dairy
including boot mounted seat. industry.
and Brewery Industries.

Contact UK Contact USA Training Literature Cartridge Seals T05™ Series

AESSEAL plc AESSEAL Inc. AESSEAL® provide training seminars For more information on AESSEAL® have a wide AESSEAL® have an extensive range of
Wetherby Road, 10231 Cogdill Road on all its products and services all of these seals see range of cartridge seals T05™ series replacement
Suite 105 which can be customized to your the 36 page component which includes many single, seals for Flygt® and
Osmaston Park Industrial Estate, specific requirements. Seminars seal range brochure double, bellows, mixer and Grindex® pumps.
Derby DE24 8HL Knoxville, TN 37932 which are usually based at our which gives detailed radially divided seals.
United Kingdom USA Global Technology Centre information on all For more information
headquarters in Rotherham, UK products shown on this For any enquiries please please request a copy
and Knoxville, USA include classroom poster. contact our Sales of the T05™ Series
and practical lessons. We also have a wide department: brochure or the T05™
Telephone: +44 (0) 1332 366738 Telephone: +1 865 531 0192 For more information you can visit the training
range of other literature
Telephone: +44 (0) 1709 369966
poster.
in upto 12 different
Fax: +44 (0) 1332 298195 Fax: +1 865 531 0571 section of our website or contact the
languages.
email: [email protected]
training department:
E-mail: [email protected] E-mail: [email protected] email: [email protected]
Telephone: +44 (0) 1709 369966
Telephone: +44(0) 1709 369966 email: [email protected]
email: [email protected]

FOR FURTHER INFORMATION AND SAFE OPERATING LIMITS CONTACT OUR TECHNICAL SPECIALISTS AT THE LOCATIONS ABOVE. Registered Trademarks: AESSEAL plc recognise all trademarks and trademark names as the property of their owners. USE DOUBLE MECHANICAL SEALS

www.aesseal.com
WITH HAZARDOUS PRODUCTS.
MOST SEALS ARE AVAILABLE IN A WIDE RANGE OF SEAL FACE, ELASTOMER AND GLAND COMBINATIONS. FLYGT® – ITT Flygt
GRINDEX® – Aktiebolaget Grindex
Kalrez®, Viton®, Neoprene® - DuPont Dow Elastomers
Aflas® - Asahi Glass Co. ALWAYS TAKE SAFETY
ALL SIZES ARE SUBJECT TO MANUFACTURING TOLERANCES. PRECAUTIONS
WE RESERVE THE RIGHT TO MODIFY SPECIFICATIONS AT ANY TIME. • GUARD YOUR EQUIPMENT
AES / AW 0901 02/2003 Copyright © AESSEAL plc 2003 • WEAR PROTECTIVE CLOTHING WARNING