Datasheet

I/O Modules

DR OUTPUT MODULES

• DIN Rail Mountable Single Point Output Modules (35mm DIN)

• Plug into mounting boards for 0.6" modules
• Zero Voltage Turn-On for AC Modules
• 4kV Optical isolation with LED Indicator
• UL Recognized, CSA Certified, CE Compliant
• Industry standard Color Coding Black (AC Output) Red (DC Output)
• Barrier Strips Accept 14 to 28 AWG Wire.

SPECIFICATIONS (1)
Input
Part Number DR-OAC DR-ODC5 DR-ODC24
Nominal Voltage [VDC] 5-24 5.0 24.0
Minimum Voltage [VDC] 3.7 3.5 18.0
Maximum Voltage [VDC] 32 8.0 32.0
Drop-out Voltage [VDC] 1.0 1.0 1.0
Maximum Current [mA] (2) 18 18 13
Resistance [Ohms] (3) NA 250 2000
Output
Nominal Line Voltage 240 VAC 5-48 VDC 5-48 VDC
Minimum Line Voltage 12 VAC 3 VDC 3 VDC
Maximum Line Voltage 280 VAC 60 VDC 60 VDC
Max Off-State Voltage (4) 600 Vpeak 60 VDC 60 VDC
Max Off-State Leakage (5) 0.1mArms 10 uA 10 uA
Static Off-State dv/dt (6) 200 V/usec N/A N/A
Maximum Rated On-State Current (7) 5.0 Arms 3.0 A 3.0 A
Minimum On-State Current 50 mArms 10 mA 10 mA
Max Surge Current (8) 250 Apeak 5.0 A 5.0 A
On-State Voltage Drop or Resistance (9) 1.6 V 1.6 V 1.6 V
Horse Power Rating (10) 1/2 H.P. N/A N/A
Fuse (11) 5 5 5
Maximum Turn-On Time [msec] (12) 8.33 0.1 0.1
Maximum Turn-Off Time [msec] (12) 8.33 0.75 0.75
Input/Output Isolation Voltage (13) 4000 Vrms 4000 Vrms 4000 Vrms
Input/Output Capacitance 8 pF 8 pF 8 pF
Operating Temperature Range -30 to 80°C -30 to 80°C -30 to 80°C
Storage Temperature Range -40 to 80°C -40 to 80°C -40 to 80°C
Line Frequency Range 47 to 63 Hz DC DC
Weight 1.1 oz. (31.2g) 1.1 oz. (31.2g) 1.1 oz. (31.2g)

General Notes:
(1) Specifications apply to an ambient temperature of -30 to 80 °C unless otherwise noted.
(2) At nominal input voltage, without external LED status indicator.
(3) +/-10% at 25°C.
(4) Maximum 1 minute duration for OAC modules when applied as a DC voltage rather than a peek AC voltage.
(5) At maximum line voltage, 25°C for OAC modules, and 80°C for ODC modules.
(6) Minimum DV/DT per EIA/NARM RS433, method RS397, DV/DT ratings do not apply to DC output models
(7) At 40°C, derate OAC modules 58 mA/°C to 80°C, derate ODC. ODCxMC and ODCxML modules 50 mA/°C
to 80°C. CSA rating of OAC modules is 3.0 Arms at 40°C.
(8) At 25°C for 1 second maximum duration: 1 AC cycle for AC modules, 1 second for DC modules.
(9) At maximum rated on-state current and 25°C.
(10) 1/3 H.P. at 240 VAC, 1/8 H.P. at 120 VAC.
(11) Fuse is BUSS # PCE5.
(12) At maximum line voltage, maximum rated output current, nominal input voltage and 25°C. Switching speed
of OAC modules is based upon 60 Hz line frequency.
(13) At 25°C for 1 second maximum duration.

Do not forget to visit us at: www.crydom.com

Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
I/O Modules

EQUIVALENT CIRCUIT DIAGRAMS / MECHANICAL SPECIFICATIONS

AGENCY APPROVALS

E46203 38595

Rev. 080916

Do not forget to visit us at: www.crydom.com

Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
I/O Modules

DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险

HAZARD OF RIESGO DE RISQUE DE GEFAHR EINES RISCHIO DI 存在电击、
ELECTRIC DESCARGA DESCHARGE ELEKTRISCHE SCOSSA 爆炸或电弧
SHOCK, ELECTRICA O ELECTRIQUE N SCHLAGES ELETTRICA O 闪烁危险
EXPLOSION, EXPLOSION. OU EXPLOSION ODER EINER DELL’ESPLOSIONE.
OR ARC FLASH. • Eteindre EXPLOSION. • 在操作此设
• Desconectar • Spenga tutta
• Disconnect all todos los toutes les • Stellen Sie l'alimentazione 备之前请先
power before suministros de sources jeglichen che fornisce
Strom ab, der
关闭电源。
installing or energia a este d'énergie de questa
working with equipo antes cet appareil dieses Gerät apparecchiatura
this equipment. de trabajar avant de versorgt, bevor prima di lavorare 若不遵守这些说明，
con este equipo. travailler Sie an dem a questa 可能会导致严重的
• Verify all Gerät Arbeiten 人身伤害甚至死亡。
dessus de cet apparecchiatura
connections • Verificar todas durchführen
appareil
and replace all las conexiones • Verificare tutti
• Vor dem
covers before y colocar todas • Vérifier tous i collegamenti
Drehen auf
turning on las tapas antes connections, et e sostituire
Energie alle
power. de energizer remettre tous tutte le coperture
Anschlüsse
el equipo. couverts en prima
Failure to follow überprüfen
olace avant de dell’accensione
these und alle
El mettre sous
instructions will Abdeckungen L'omissione di
incumplimiento
result in death de estas De non-suivi de ersetzen. queste istruzioni
or serious injury. instrucciones ces instructions Unterlassung provocherà la
puede provocar provoquera la dieser morte o
la muerte o mort ou des Anweisungen lesioni serie
lesiones serias. lésions sérieuses können zum
sérieuses. Tode oder zu
schweren
Verletzungen
führen.

WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /

RISK OF MATERIAL DAMAGE AND HOT RISQUE DE DOMMAGE MATERIEL ET DE GEFAHR VON MATERIALSCHÄDEN UND
ENCLOSURE SURCHAUFFE DU BOITIER GEHÄUSEERHITZUNG

• The product's side panels may be hot, allow • Les panneaux latéraux du produit peuvent être • Die Seitenwände können heiß sein. Lassen Sie
the product to cool before touching. chauds. Laisser le produit refroidir avant de le das Produkt abkühlen, bevor Sie es berühren.
• Follow proper mounting instructions including toucher. • Beachten Sie die Montageanweisungen,
torque values. • Respecter les consignes de montage, et • Führen Sie keine Flüssigkeiten oder
• Do not allow liquids or foreign objects to enter notamment les couples de serrage. Fremdkörper in das Produkt ein.
this product. • Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner, Die Nichtbeachtung dieser Anweisung kann
Failure to follow these instructions can result in des lésions corporelles graves ou des
serious injury, or equipment damage. Körperverletzung oder Materialschäden
dommages matériels. zur Folge haben.

RIESGO DE DAÑOS MATERIALES Y DE 材料损坏和高温外壳的危险性

RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
SOBRECALENTAMIENTO DE LA UNIDAD CALDO
• 产品的一侧面板可能很热，在其冷却前请
• Los paneles laterales del producto pueden • I pannelli laterali dell'apparecchio possono 不要触碰。
estar calientes. Esperar que el producto se scottare; lasciar quindi raffreddare il prodotto • 遵照正确的安装说明，包括扭矩值。
enfríe antes de tocarlo. prima di toccarlo.
• Respetar las instrucciones de montaje, y en • 请勿让液体及其他异物进入本产品。
• Seguire le istruzioni di montaggio corrette.
particular los pares de apretado. • Non far entrare liquidi o oggetti estranei in questo
• No dejar que penetren líquidos o cuerpos apparecchio.
extraños en el producto.
La mancata osservanza di questa precauzione può 如不能正确执行这些操作说明，
Si no se respetan estas precauciones pueden causare gravi rischi per l'incolumità personale o
producirse graves lesiones, daños materiales. danni alle apparecchiature.
极有可能造成严重人体伤害或者设备的损坏。

Do not forget to visit us at: www.crydom.com

Copyright © 2016 Crydom Inc. Specifications subject to change without notice.
 Datasheet
I/O Modules

ANNEX - ENVIROMENTAL INFORMATION

The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.

Part Toxic or hazardous Substance and Elements

Name
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers
(Cr (VI)) (PBB) (PBDE)

Semiconductor die
Solder

附件 - 环保信息

部件 有毒有害物质或元素
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点

50

Do not forget to visit us at: www.crydom.com

Copyright © 2016 Crydom Inc. Specifications subject to change without notice.