2.

Packing List EXPOSURE

5.4 PTZ 5.6.5 Communication Setup
Mode Manual P/T/Z COMMUNICATION SETUP
1 Shutter 1/125 D-Zoom Limit Off Protocol VISCA

HD AI Auto Tracking Conference Camera 2

3
Iris
Gain
F1.8
2
Speed By Zoom
L/R Set
On
STD
VAddress
VAddrFix
1
Off
4 DRC 2 Display Info On Net Mode Serial

User Manual
Iris: Off/F11.0/F9.6/F8.0/F6.8/F5.6/F4.8/F4.0/F3.4/F2.8/F2.4/F2.0/F1.8 Image Freeze Off Baudrate 9600
5 （Only effective under Manual/SAE mode) Call Preset Speed 24 IR Addr General
Shutter：1/60-1/10000（Only effective under Manual/SAE mode） Pre zoom Speed 5
ProtocolVISCA/PELCO-D/PELCO-P
Pt By Speed Slow
EXPOSURE V Address1-7
6 7
V AddrFixOn/Off
-Mode SAE D-Zoom LimitOff/x2/x4/x8
Net ModeSerial/Paral
HD AI Auto Tracking Conference Camera DC 12V Power Supply Shutter 1/125 Speed by ZoomOn/Off
8
Baudrate9600/19200/38400/2400/4800
Gain Limit 3 L/R SetSTD/REV
IR AddrGeneral/NO.1/NO.2/NO.4/NO.4
9 10
Enter Single Object When entering single object tracking mode, press the Meter Average Display InfoOn/Off
Tracking PTZ Control Keys to select the object. Press to confirm.
DRC 2 Image FreezeOn/Off
11 AI 12 Exit Single Object Press to exit single object tracking mode, COMMUNICATION SETUP COMMUNICATION SETUP
13 Tracking and return to auto-framing mode. Call Preset Speed1-24
AI Turn/off auto-framing mode
Protocol PELCO-D Protocol PELCO-P
16
EXPOSURE EXPOSURE Pre Zoom Speed0-7
14 15 P-DAddr 1 P-PAddr 1
19
Mode AAE Mode Bright
Pt By SpeedSlow/Medium/Fast
Baudrate 9600 Baudrate 9600
17 Iris F1.8 Bright 8 5.5 Noise Deduction IR Addr General IR Addr General
Wall Mount Mounting Screws 02 Gain Limit 3 Gain Limit 3
18 NOISE REDUCTION P-D Addr0-254 P-P Addr0-31
12 Meter Average Meter 2
DRC 2 DRC verage 2D NR Auto 5.6.6 Tracking Setup
Anti-Flicker Off Anti-Flicker Off 3DNR Auto
TRACKING SETUP

Bright: 0-17（Only effective under Bright mode)

HD AI Auto Tracking Conference Camera
2D NROff/Auto/1-5 Tracking Enable Off
User Manual 3D NROff/Auto/1-8 Tracking Overlay On
5.2 Color 5.6 Setup Delay Time 1

Color SETUP Tracking EnableOn/Off

AI
WB Mode Auto Tracking OverlayOn/Off
Language English
AWB Sens Low Delay Time1-60
Video Setting
RG Tuning 3 Audio Setting 5.6.7 Other Setup
Version V1.0
BG Tuning 1 Focus Setting
OTHER SETUP OTHER SETUP
Saturation 100% USB Setting
Hue 7 Auto Inversion On Auto Inversion On
Communication Setting
Preset Tour Off Preset Tour On
User Manual Remote Control USB Cable Tracking Setting
WB Mode：Auto/Indoor/Outdoor/OnePush/Manual/VAR OSD Flip Off ResidenceTime 2
Other Setting
Version V1.0 AWB Sens：Low/Normal/High OSD TimeOut Off Call Preset Speed 12
RG Tuning-10-10 LanguageChinese/English OSD Flip Off
BG Tuning-10-10 OSD TimeOut Off
Saturation60%-200% Auto InversionOn/Off Residence Time1-60
Hue0-14 Preset TourOn/Off Call Preset Speed1-24
OSD FlipOn/Off
OSD TimeOutOff, 2.5 minutes

5.6.1 Video Setup 5.7 Information

1. Product Description 3.Performance Characterics 5. Camera Menu Setup Color Color
VIDEO SETUP INFORMATION
WB Mode Indoor WB Mode Outdoor
Saturation 100% Saturation 100% DVI Mode HDMI Version 9.0.01
1.1 Front Camera Exposure
Sensor 1/2.8'' Hue 7 Hue 7 Format Mode OSD Date 2024-01-12
Effective Pixels 2.07MP
1080P60, 1080P59.94, 1080P50, 1080P30, 1080P29.97, 1080P25, 1080I60, 1080I59.94, 1080I50, 720P60, 720P59.94, 720P50 MAIN MENU HDMI Format 1080P60 AF Version 5.4.59
Video Signals
Zoom 12x optical zoom 20x optical zoom 30x optical zoom Color Color SDI Mode Level A Video Format 1080P60
Lens f=4.2mm ~ 50.4mm f=4.6mm ~ 92mm f=4.6mm ~ 138mm
Exposure
Aperture F1.8 ~ F2.8 F1.8 ~ F3.6 F1.8 ~ F3.6 WB Mode OnePush WB Mode Manual DVI ModeDVI/HDMI
Horizontal Angle 70.2° ~ 6.52° 62.3° ~ 3.46° 62.3° ~ 2.31° Color 5.8 Restore Default
Vertical Angle 42.6° ~ 3.76° 36.1° ~ 1.92° 36.1° ~ 1.29° AWB Sens Low R Gain 120 Format ModeOSD/DIP/50HZ/60HZ
Image
Diagonal Angle 77.5° ~ 7.53° 69.5° ~ 3.86° 69.5° ~ 2.63°
RG Tuning 3 B Gain 130 HDMI Format:1080P60/1080P59.94/1080P50/1080P30/1080P29.97 RESTORE DEFAULT
1 Digital Zoom 8X P/T/Z
BG Tuning 1 Saturation 100% /1080P25/1080I60/1080I59.94/1080I50/720P60/720P59.94/720P50
Video Output USB 3.0, HDMI, RJ45, SDI
Noise Reduction Yes
Signal Standard NTSC/PAL
Saturation 100% Hue 7 Only effective under the OSD Format Mode. When in DIP Format
Control Interface RS232, RS485, USB, NET Setup No
Shutter 1/30s ~ 1/10000s Hue 7 Mode, set with the DIP switches and corresponding table on the
Information
White Balance Auto, Indoor, Outdoor, One Push, Manual, VAR bottom of the camera)
Backlight Compensation Support Restore Default R Gain：0-255 SDI ModeLevel A/Level B
B Gain：0-255
Digital Noise Reduction 2D&3D Digital Noise Reduction

[HOME] Enter
6. Common Operation Instructions
Baud Rate 2400/4800/9600/19200/38400

2
Control Protocol VISCA, Pelco-D,Pelco-P
[MENU] Exit 5.6.2 Audio Setup
1 Lens USB Protocol UVC 1.1 Color

Press the 【MENU】 button on the Remote to enter/exit the main menu of the camera.
Minimal Illumination 0.5 Lux @ (F1.8, AGC ON)
AUDIO SETUP
2 Pan&Tilt SNR ≥50dB WB Mode VAR
Press the button to enter sub-menu.
Horizontal Rotation 350° (±175°) 0.1°/s～100°/s
Colortemp 6500K AUDIO SOURCE LINE
Vertical Rotation 180° (±90°)0.1°/s～80°s
3 Power INPUT VOL 30
H & V Flip Support
RG Tuning 3
Image Freeze Support
3 4 4 Standby BG Tuning 1 AUDIO OUT HDMI/SDI
PoE Support EXPOSURE
Number of Preset 255
Saturation 100% INPUT VOL0-30
Preset Accuracy 0.1° Mode Auto
IPC Features Hue 7 AUDIO OUTHDMI/SDI,LINEOUT,Off
ExpCompMode On
1.2 Back Video Encoding Format H.264/H.265/MJPG
Video Stream Main Stream, Sub Stream ExpComp -1 Colortemp: 2500K-8000K 5.6.3 Focus Setup
Main Stream Resolution 1920x1080, 1280x720, 1024x576 , 940x540,etc.
Gain Limit 3
Sub Stream Resolution 1280x720, 1024x576, 720x480, 720x408,etc.
5.3 Image FOCUS SETUP
Video Bit Rate 32Kbps ~ 102400Kbps Meter Average
Bit Rate Type Variable Rate, Fixed Rate
IMAGE AF-Sense High
Frame Rate 50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps Backlight Off
1 DC 12V AF-Zone Center
Audio Compression AAC
DRC 2 Luminance 7
Audio Bit Rate 96Kbps, 128Kbps, 256Kbps
2 RS-485 Anti-Flicker Off AF-SenseHigh/Low/Normal
Network Protocol NDI |HX2,SRT,TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP, Multicast, etc.
Contrast 7
3 RS-232in Input/Output Interface Note: Press the direction key when you need to adjust the angle.
Mode: Auto/Manual/SAE/AAE/Bright
HD Output 1xHDMI Sharpness 4 AF-ZoneFront/Top/Center/Bottom
If you want to move the camera slowly, just click the direction key;
ExpComp Mode: On/Off (only effective under Auto/AAE mode)
4 RS-232out
LAN
1x3G-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M standard
1xRJ45:10M/100M Ethernet Interface,PoE802.3af
B&W-Mode Colorful 5.6.4 USB Setup
ExpComp Range: -7~7(only effective under ExpComp mode)
5 USB3.0 If you want to move the camera fast at a large scale,just long-press the button;
Audio Interface 1-ch: 3.5mm Audio Interface, Line In Flip-H On
FOCUS SETUP
Gain Limit: 0-15
6 HDMI
USB
1-ch: 3.5mm Audio Interface, Line Out
1xUSB3.0: Type B female jack
Flip-V Off If you want to adjust the Pan-Tilt direction, just press and hold the L/R button
Meter: Average/Center/Smart/Top
7 SDI H264Enable Off
Communication Interface 1xRS232 In: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA/Pelco-D/Pelco-P Gamma 0.5 for 10S.
Backlight: On/Off (only effective under Auto/AAE mode)
8 Line-in 1xRS232 Out: 8pin Min DIN, Max Distance: 30m, Protocol: VISCA network use only
Image style Default USB Mode BULK
1xRS485: 2pin Phoenix Port, Max Distance: 1200m, Protocol: VISCA/Pelco-D/Pelco-P

DRC: 0-8
9 Line-out UVC Standby Mode Off
Power Jack JEITA type (DC IN 12V)

Anti-Flicker: Off/50HZ/60HZ
LAN Generic Specification
Wakeup Pos Preset 0
10
Power Supply DC 12V/2A
Luminance：0-14 Contrast：0-14
Power Consumption 12W Sharpness：Auto/0-15
Work Temperature 0°C ~ 40°C H264 EnableOn/Off
1 2 3 4 5 6 7 8 9 10 B&W Mode：Colorful、B&W
Work Humidity 0~95% RH
USB Mode: BULK/ISOC
Product Size 247.1*152*169.6mm/285*217*197mm(before / after packing) Flip-H：On/Off Flip-V：On/Off
Product Weight 1.37kg/2.45kg (net / gross weight) UVC Standby ModeOn/Off
Gamma：Ext/Default/0.45/0.5/0.56/0.63
Wakeup PosPreset 0/Preset UVC
Image Style：Default/Clarity/Norm
 6.8 7.5.2

7.4.1Select "Setup"- ”Video Settings"- "System Settings" to enter the

following interface:

Main Stream Sub-stream

Video Coding： H264 Video Coding： H264

Encode Type: MainProfile Encode Type： MainProfile

Resolution: 1920x1080 Resolution: 1280x720

Bit-rate Type： CBR Bit-rate Type: CBR

<15°
GOP： 60 (1-1200)fps GOP： 30 (1-1200)fps

6.9 Bit Rate: 4096 (32-102400)Kbps Bit Rate: 1024 (32-102400)Kbps

Frame rate： 60 (1-60) Frame rate 30 (1-60)

Qfactor: 95 (70-95) Qfactor. 95 (70-95)

Save Refresh

<15°

7.4.2

Select “Setup”- “Network Settings”- “RTSP” to enter following interface:

Identity Authentication

Port 554

One-Stream: rtsp://192.168.13.71:554/live/av0

Sub-Stream: rtsp://192.168.13.71:554/live/av0

7.6.1 Select "Setup"--"Maintenance" --"System Upgrade" to enter the

Save Refresh following interface:

6.6 AI Mode
System Edition

1.Press 【AI】button to enter autoframing mode， SOC 9.0.01

and start Auto Tracking; Press【AI】button again to turn off autoframing. Restart Reboot

2. When in autoframing mode，press to track single object.A red Upgrade

Uparade File Upload Upgrade

box will appear on the object tracked. Switch between different objects
by pressing the PTZ Control Keys. Press button to start Single Object
Tracking, when the object is confirmed.
3.Press to exit Single Object Tracking mode and return to 7.4.3
general autoframing.
Select “Setup”- “Network Settings”- “RTMP” to enter following interface:

6.7 DIP Switch Setup 1

Enable RTMP
DIP HDMI SDI
One-Stream: rtsp://192.168.13.71:554/live/av0
0x00 1080p60 1080p60
Sub-Stream: rtsp://192.168.13.71:554/live/av0
0x01 1080P59.94 1080P59.94
Save Refresh
0x02 1080p50 1080p50
0x03 1080p30 1080p30
0x04 1080p29.97 1080p29.97
0x05 1080p25 1080p25
LOGIN 7.7 VISCA over IP
0x06 1080I60 1080I60
WELCOME VISCA Protocol is transmitted through IP to reduce RS232/RS485
0x07 1080I59.94 1080I59.94
0x08 1080I50 1080I50 IP CAMERA cabling(the controller must support IP communication)
Web Service 7.5 Modify the camera IP and computer IP on to the same network
English
0x09 720P60 720P60 Communication Port Specification:
0xA 720P59.94 720P59.94 Login segment, so that the computer network is not affected.
Control Port: RJ45
0xB 720P50 720P50 7.5.1Select "Setup"- "Network Settings"- "Local Network" to enter the
7.3.2 IP Protocol: IPV4
0xC RSVD RSVD
following interface: Transmission Protocol: Sony VISCA;
0xD RSVD RSVD
0xE RSVD RSVD IP address: Setting through the web
0xF RSVD RSVD Port address: Sony VISCA(52381
IP Configuration Type Static IP
Setup Live View
Application Range: Under the same network segment
(1)Default Format Mode: DIP. Setting path: MENU-SETUP-VIDEO SETU PTZ Image Exposure White Balance
IP Address: 192.068.110.206 (0.0.0.0-225.225.225.225)
(2)Two options for Format Mode: DIP and OSD
255.255.255.0
(3)When choosing DIPthe corresponding resolutions for the DIP values on the Subnet Mask:

table above will be output. Default resolution is 1080P60, when DIP is Gateway: 192.168.110.254
between 0xC and 0xF.
PT Speed 15 MAC Address: 80:0d:ed:5c:30:05

VIDEO SETUP Zoom Speed

Focus Mode Auto

Preferred DNS 192.168.110.7
DVI Mode HDMI Sensitivity Normal

Format DIP AF Zone Center

192.168.110.8
Focused NormalMode
Alternative DNS
SDI Mode Level A
Scene
Save Refresh
Preset

(4)When choosing OSD,HDMI Format at the next line will display the video SN Name Operate

resolution, and the resolution is optional.

0 0 Setting

1 1 Setting

2 2 Setting
VIDEO SETUP
3 3 Setting
DVI Mode HDMI 4 4 Setting
Format Mode OSD 5 5 Setting
HDMI Format 1080P60
SDI Mode Level A