成都兢志成电子科技有限公司 www.jzcet.

com tel:028-66570969/18227618314

JCF2403 型 直流风机温控调速器
JCF2403 DC Fan Temperature Control Governor
用户手册 v1.0 / User Manual v1.0

成 都 兢 志 成 电 子 科 技 有 限 公 司
Chengdu Jingzhicheng Electronic Technology Co., LTD

1
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

版权©2023 成都兢志成电子科技有限公司保留所有权
Copyright © 2023 Chengdu Jingzhicheng Electronic Technology Co., Ltd. retains the
ownership

所有权信息
未经版权所有者同意，不得将本文档的全部或者部分以纸面或者电子文档的形式重新发布。
本文档仅用于辅助用户使用产品，我司不对因该文档中的信息而引起的损失或者错误负责。.
本文档描述的产品可能会不断地升级完善，我司有权在未通知用户的情况下修改本文档。
Ownership information
All or part of this document shall not be republished in paper or electronic document
without the consent of the copyright owner.
This document is only used to assist users with the product, and we are not
responsible for the loss or error caused by the information in this document
The products described in this document may be continuously upgraded and improved,
and we have the right to modify this document without notifying the users.

版本信息/Version information：
版本号 主要变更内容 日期
Version number Main change content date
初始版本
V1.00 The initial version 2023-07

2
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

1.功能概述/Function overview
JCF2403 型直流风机智能温控调速器采用程控线性调压技术，工业级品质，稳定耐用；兼容
性优异，可支持各种直流 12V/24V 风机接入，
双温度探头实时测温，调速器通过检测到温度来控制风机的电源电压，从而实现风机转速控
制，温度越高风机转速越快，温度越低风机转速越慢，自动平衡温度和风机转速，真正达到
按需散热、节能降噪、延长风机寿命的效果，
调速器还支持一路独立的温控开关（继电器输出），可用于高温报警，温控加热/制冷等领
域,还可以用于基于温控调压输出的其他领域。
The JCF2403 DC fan intelligent temperature control governor adopts programmable
linear voltage regulation technology, with industrial grade quality and stability
and durability, supporting various DC 12V/24V fan connections,
Dual temperature probes, and the governor controls the power supply voltage of the
fan by detecting temperature,The higher the temperature, the faster the fan speed,
while the lower the temperature, the slower the fan speed, truly achieving the effect
of on-demand heat dissipation, energy conservation and noise reduction, and
extending the fan life,
The governor also supports an independent temperature control switch (relay output),
which can be used in fields such as high temperature alarm, temperature controlled
heating/cooling,also for other fields based on temperature controlled voltage
regulation output.

2.技术参数/Technical parameters
1.工业级方案，采用 ARM 内核系列单片机作为主控芯片，性能稳定
Industrial grade solution, stable performance
2.宽电压设计，供电电源范围：DC9V~30V,最大驱动（输出）电流 3A
Wide voltage design, power supply range: DC9V~30V, maximum current 3A
3.带 LED 数码管显示，直观指示调速器的工作状态
With LED display, it can visually indicate the working state
4.电源防反接保护，接口防浪涌保护
Power supply anti reverse protection, interface anti surge protection
5.风机启动、全速温度可自由设置，支持最小转速和关停风机两种工作模式
Fan start and full speed temperature can be freely set, supporting two working
modes: minimum speed and fan shutdown
6.集成一路独立的温控开关继电器
Integrate an independent temperature control switch relay
7.支持接入两路温度探头，测温范围：-20~120℃，
Support two temperature probes, measurement range of -20~120 ℃
8.测温精度：±1℃
Temperature measurement accuracy: ± 1 ℃
9.工作温度范围：-30~80℃
Working temperature range: -30~80 ℃

3
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

3. 产品尺寸/Product size

4.接口说明/interface specification

1 号端子：调速器供电端口（一个 DC5.5*2.1 直插口+1 个接线端子接口，2 选 1 使用）

NO.1: Governor power supply port
2 号端子：2 个温度探头插口
No.2: Temperature probe socket
3 号端子：2 路风机接线端口，风机的电源线不带插头的，可以接在此处
No.3: fan wiring port
4 号端子：4 个 KF2410-2P 插口（插口针间距 2.54mm），带此插头的风扇可以直接插在此处
No.4: fan wiring port
5 号端子：温控开关继电器输出接线端口
No.5: Temperature control switch relay output wiring port
6 号位：数码显示窗及按键
No.6: Display window and buttons

4
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

*全功能接线示意图/Wiring diagram:
(实际使用时，部分功能可能用不到，直接忽略其接线即可)
(in actual use, part of the unused functions, the wiring can be directly ignored)
*直流电源的电压必须大于等于所接风扇的额定电压，且输出电流必须大于风扇电流的总和
*The voltage of the power supply must be greater than or equal to the voltage of
the fan, and the output current must be greater than the sum of fan currents

5.基础使用说明/Come into use

5.1,按接口说明连接好接线
5.2,供电正常后，主板上的 POW 灯会亮起，此时调速器开始检测当前温度，并根据当前设置
的温度区间来调节风机的转速，以调速器出厂默认的温度区间为例，调速器出厂默认的温度
区间为 L=30℃，H=50℃，当检测到当前温度大于等于 30℃时，调速器按线性比例调节风扇
的转速，温度升高，风扇转速也会加快，当温度≥50℃时，风机变为全速。当温度降低到≤
27℃（L-3）时，调速器使风扇处于最小转速或关闭风机。
5.1, Connect the wiring according to the interface instructions
5.2,After the power supply is normal, the POW light on the motherboard will light
up. At this point, the governor will start to detect the current temperature and
adjust the fan speed based on the current set temperature range. Taking the default
temperature range of the governor factory as an example, the default temperature
range of the governor factory is L=30 ℃, H=50 ℃. When the current temperature is
detected to be greater than or equal to 30 ℃, the governor will adjust the fan speed
in a linear proportion. As the temperature increases, the fan speed will also
increase, When the temperature is ≥ 50 ℃, the fan becomes at full speed. When the
temperature drops to ≤ 27 ℃ (L-3), the governor sets the fan at minimum speed or
shuts down the fan.

5
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

风机转速&温度关系示意图：
Schematic diagram of the fan rotation speed & temperature relationship:

In the figure above, L is the starting temperature of the fan, and H is the temperature
of the fan at full speed, which can be set freely.
G is for reference only,

6.数码面板操作说明
数码面板实时显示当前温度，带 4 个按键，通过按键可以设置调速器的所有参数
待机状态下，按 MODE 键可进入配置/切换参数项，配置时按↕键可以调整数值，OK 键确
*待机状态下，按↑键可以切换显示两个温度探头各自采集到的温度
*设置参数时，每设置一项参数（改变了参数值），都必须按一次 OK 键确认，再设下一项。

The digital panel displays the current temperature in real time, with four keys,
through which all the parameters of the governor can be set, In idle state, press
MODE key to enter the configuration / switch parameter items, and press ↕ key to
adjust the value, and OK key to confirm
*In idle mode, press the ↑ key to switch between displaying the temperatures
collected by each of the two temperature probes
* When setting the parameters, for each parameter set (the parameter value is
changed), you must press the OK key once to confirm, and then set the next item.

6
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

参数项/Parameter item

数显代号 参数释义 参数说明

风机启动温度 设置风机的启动（下限）温度值
Lxx Start 设置范围：-20~120℃
temperature of Set the start temperature value of the fan
fan Setting range: -20~120℃
设置风机的全速（上限）温度值
Hxx 风机全速温度 设置范围：-20~120℃，H 的值必须大于 L 的值
Full speed Set the full speed temperature value of the fan
temperature of Set the range: -20~120℃, the value of H must be greater
fan than the value of L

设置调速器所接风扇的额定电压（调速器最大输出电压）：
设置范围：12/24
*此参数一定要按实际情况去设置，如果接入的是 12V 的风
Uxx 风机额定电压 扇，U 参数就设为 U12，调速器的供电电源必须≥12V,
Fan rated 如果接入的是 24V 的风扇，U 参数就设为 U24，调速器的供电
voltage 电源必须≥24V
selection Set the voltage of the fan (maximum output voltage):
Setting range: 12/24
*This parameter must be set according to the actual
situation. If a 12V fan is connected, the U parameter
is set to U12, and the power supply for the governor must
be ≥ 12V,
If a 24V fan is connected, the U parameter is set to U24,
and the power supply for the governor must be ≥ 24V

设置风机的启动电压（调速器最小输出电压）：
设置范围：30%~80%
Exx 风机启动电压 此参数用于匹配不同启动电压的风扇，
Fan starting 风机启动电压=E/10*U,
voltage 此参数默认为 5 即风机启动电压为 0.5*U，
Set the starting voltage of the fan
(minimum output voltage of the governor):
Setting range: 30%~80%
This parameter is used to match fans with different
starting voltages,
Fan starting voltage=U * E/10,
When using, if the fan cannot operate normally at low
temperatures, this parameter can be set higher

7
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

设置调速器的工作模式
当温度小于设置的启动温度-3℃时，用此参数设置调速器是
控制风机关闭还是维持风机处于最小（20%）的转速）
Pxx 工作模式 设置范围： 01 表示维持最小转速，00 表示关闭风机
work pattern Set up the working mode of the governor
When the temperature is less than the set start
temperature-3℃, use this parameter to set the governor
to control the fan off or maintain the fan at the minimum
(20%) speed)
Setting range: 01 means maintaining the minimum
rotation speed, and 00 means turning off the fan

设置温控继电器的工作参数：
如果设置的 b 值＞C 值：当温度≥b 值时，温控继电器开启，
温控继电器 当温度≤C 值时，温控继电器关闭，此项可用于高温报警或
bxx 开启温度 控制大功率制冷；
Temperature 如果设置的 b 值＜C 值：当温度≤b 值时，温控继电器开启，
control relay 当温度≥C 值时，温控继电器关闭，此项可以用于低温报警
Opening 或控制加热器加热；
temperature 设置范围：-20~120℃
Set the parameters of the temperature control relay:
If the set value of b is greater than the value of C:
when the temperature is greater than or equal to the
value of b, the temperature control relay is activated,
When the temperature is ≤ C value, the temperature
control relay is turned off, which can be used for high
temperature alarm or
Cxx 温控继电器 Control high-power refrigeration;
关闭温度 If the set value of b is less than the value of C: when
the temperature is less than or equal to the value of
b, the temperature control relay is turned on,
When the temperature is ≥ C value, the temperature
control relay is turned off, which can be used for low
temperature alarm Or control the heating of the heater;
Setting range: -20~120 ℃

8
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

*以设置风机的启动、全速温度为例 / For example

* Take setting the start and full speed temperature of the fan

待机状态下，面板显示当前的温度值，按 1 下 MODE 键，数码管显示 Lxx，L 代表启动温度，

xx 表示当前设置的温度值，按上下键可以调整参数值，
调整完成后，按 ok 键确认，回到待机界面
待机状态下，按 2 下 MODE 键，数码管显示 Hxx，H 代表全速温度，xx 表示当前设置的温度
值，按上下键可以调整参数值，调整完成后，按 ok 键确认
设置完成，调速器将根据新设置的温度参数来自动控制风机的转速。

In the idle state, the panel shows the current temperature value, press 1 MODE key,
the digital tube displays Lxx, L represents the start temperature, xx represents
the currently set temperature value, Press the upper and lower keys to adjust the
parameter value. After the adjustment is completed, press the ok key to confirm and
return to the standby interface
In idle state, press MODE key for 2, the digital tube shows Hxx, H represents the
full speed temperature, xx represents the current set temperature value, press the
upper and lower key to adjust the parameter value, after the adjustment is completed,
press OK key to confirm
When the setting is complete, the governor will automatically control the speed of
the fan according to the newly set temperature parameters.

9
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

7.关于温控继电器的使用/About Temperature Control Relay

调速器内部集成一个独立的温控开关继电器，既可作为高/低温报警指示信号接入到 PLC/
动环的开关量输入口，也可以直接作为开关控制其他大功率设备
继电器参数：AC250V/DC30V/最大负载电流 3A
继电器关闭（断开）时：COM1 和 NO1 断开、与 NC1 导通
继电器开启（闭合）时：COM1 和 NO1 导通、与 NC1 断开
*继电器的开/关由参数 d、C 以及当前温度共同来决定，与风机控制完全独立
*继电器本身不带电压输出，只是一个物理开关
The governor is internally integrated with an independent temperature control switch
relay, which can be used as a high/low temperature alarm indicator signal to connect
to the switch input port of the PLC/moving ring, or directly used as a switch to
control other high-power equipment
Relay parameters: AC250V/DC30V/maximum load current 3A
When relay closed: CM1 and NO1 are disconnected and connected to NC1
When relay open: CM1 and NO1 are connected, and NC1 is disconnected
*The opening/closing of the relay is determined by the parameters d, C, and the
current temperature, and is completely independent of the fan control
*The relay itself does not have a voltage output, it is just a physical switch

内部结构如下图
The internal structure is shown in the following figure:

10
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

7.1，使用实例 1 / Usage Example 1

作为开关控制加热器自动温控加热，当机柜温度低于温控继电器开启温度（b 参数值）时自
动开启加热，当机柜温度高于温控继电器关闭温度（C 参数值）时自动关闭加热， 以此保
持机柜恒温/防凝露
*设置时 b 参数值必须小于 C 参数值
*如果加热器的电流超过 3A,则需要在调速器和加热器之间加中间继电器以扩大驱动电流
As a switch controlled heater for automatic temperature control heating, when the
cabinet temperature is lower than the parameter b value,Automatically turn on
heating, and automatically turn off heating when the cabinet temperature is higher
than the parameter b value,
the value of parameter b must be less than the value of parameter C

7.1，使用实例 2/Usage Example 2

作为开关实现高温报警，当机柜温度高于温控继电器开启温度（b 参数值）时自动开启报警，
当机柜温度低于温控继电器关闭温度（C 参数值）时自动关闭报警
*设置时 b 参数值必须大于 C 参数值
As a switch to achieve high temperature alarm, it automatically turns on the alarm
when the cabinet temperature is higher than the parameter b value, and automatically
turns off the alarm when the cabinet temperature is lower than the parameter C value
*The value of parameter b must be greater than the value of parameter C

11
 成都兢志成电子科技有限公司 www.jzcet.com tel:028-66570969/18227618314

成都兢志成电子科技有限公司
Chengdu Jingcheng Electronic Technology Co., LTD
官网/website：www.jzcet.com
固话/Fixed-line：028-66570969
手机/Mobile phone：18227618314
邮箱/Email address：[email protected]
地址/Address：四川省成都市双流区龙桥路 6 号
Address: No.6, Longqiao Road, Shuangliu District, Chengdu, Sichuan

12