ME6209

Low Power Consumption LDO ME6209 Series

General Description Features

The ME6209 series are a group of positive  Ultra low quiescent current: 3.0uA(typ)
voltage output, three –pin regulator, that provide a  High input voltage (up to 18V)
high current even when the input/output Voltage
 Low dropout voltage :80mV@Iout=40mA
differential is small. Low power consumption and
high accuracy is achieved through CMOS （VOUT=3.3V）
technology. They allow input voltages as high as  Output voltage accuracy： ±2％
18V.
 Maximum output current：250mA (VOUT =3.3V）

 Low temperature coefficient

Typical Application Package

 Cameras, video recorders ● 3-pin SOT23-3、SOT89-3、TO-92

 Voltage regulator for microprocessor

 Voltage regulator for LAN cards

 Wireless communication equipment

 Audio/Video equipment

Typical Application Circuit

V12 www.microne.com.cn Page 1 of 14

 ME6209
Selection Guide

ME 6209X X X X X G
Environment mark
Package:
M3--SOT23-3
P--SOT89-3
T--TO92

Output Voltage

Function
Product Type
Product Series
Microne

product series product description

ME6209A18M3G VOUT =1.8V； Package：SOT23-3

ME6209A25TG VOUT =2.5V； Package：TO-92

ME6209A27M3G VOUT =2.7V； Package：SOT23-3

ME6209A33PG VOUT =3.3V； Package:：SOT89-3

ME6209A44PG VOUT =4.4V； Package:：SOT89-3

ME6209A50M3G VOUT =5.0V； Package：SOT23-3

NOTE: At present ,there are five kinds of voltage value：

1.8V、2.5V、2.7V、2.8V、3.0V、3.3V、3.6V、4.0V、4.4V、4.5V、5.0V。
If you need other voltage and package, please contact our sales staff。

V12 www.microne.com.cn Page 2 of 14

 ME6209
Pin Configuration

SOT23-3 SOT89-3 TO-92

Pin Assignment
Pin Num
Symbol Function
SOT89-3/TO-92 SOT23-3
1 1 VSS Ground
2 3 VIN Input
3 2 VOUT Output

Block Diagram

V12 www.microne.com.cn Page 3 of 14

 ME6209
Absolute Maximum Ratings
Parameter Symbol Ratings Units
Input Voltage VIN 18 V
Output Voltage VOUT Vss-0.3～VIN +0.3 V
Output Current IOUT 500 mA
Operating Temperature Range TOPR -45～＋150 ℃
Storage Temperature Range TSTG －55～＋150 ℃
SOT89-3 500
Power Dissipation TO-92 PD 500 mW
SOT23-3 300

Electrical Characteristics
ME6209A18
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV

Dropout Voltage
VDIF IOUT =40mA 150 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.1 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

V12 www.microne.com.cn Page 4 of 14

 ME6209
ME6209A25
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV

Dropout Voltage
VDIF IOUT =40mA 100 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.1 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

ME6209A27
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 10 40 mV

Dropout Voltage
VDIF IOUT =40mA 90 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.1 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

V12 www.microne.com.cn Page 5 of 14

 ME6209

ME6209A30
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 20 40 mV

Dropout Voltage
VDIF IOUT =40mA 80 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.1 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

ME6209A33
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 80 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.05 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

V12 www.microne.com.cn Page 6 of 14

 ME6209

ME6209A36
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 80 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.05 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

ME6209A40
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 75 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.1 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

V12 www.microne.com.cn Page 7 of 14

 ME6209

ME6209A44
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 70 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.05 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

ME6209A45
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 70 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.05 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

V12 www.microne.com.cn Page 8 of 14

 ME6209

ME6209A50
(VIN= VOUT+1.0V，CIN=CL=10uF，Ta=25OC, unless otherwise noted)
Parameter Symbol Conditions Min. Typ. Max. Units
VOUT(E) IOUT=10mA, VOUT (T)
Output Voltage X 0.98 X 1.02 V
(Note 2) VIN=VOUT+1V (Note 1)

Input Voltage VIN 18 V

Maximum Output Current IOUT _max VIN=VOUT+1V 250 mA

Load Regulation ∆VOUT VIN=VOUT+1V, 1mA≤IOUT≤60mA 15 40 mV

Dropout Voltage
VDIF IOUT =40mA 70 mV
(Note 3)
Supply Current ISS VIN=VOUT+1V 3 5 μ A
∆VOUT IOUT =10mA
Line Regulations 0.05 0.2 %/V
∆VIN ×VOUT VOUT+1V ≤VIN≤18V

Temperature VIN=VOUT+1V, IOUT =10mA

△VOUT/△Ta ±0.7 mV/℃
Coefficient -40℃<Ta<85℃

Note ：
1. VOUT (T) ：Specified Output Voltage
2.VOUT (E) ：Effective Output Voltage ( ie. The output voltage when “VOUT (T)+ 1.0V”is provided at the Vin pin
while maintaining a certain IOUT value.)
3.VDIF：VIN1 –VOUT (E)’
VIN1 ：The input voltage when VOUT(E)’ appears as input voltage is gradually decreased.
VOUT (E)’=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT and {VOUT (T)+
1.0V} is input.

Precautions
 During the test, if AC/DC power supply and the ceramic chip capacitors collocation are used, there may be
serious voltage spike phenomenon instantaneously. When the power supply access to 16V, the voltage is
rushed to about 30V instantaneously. Because of exceeding the limit voltage of chip, the chip is damaged. If
you string a small resistance of 1 ohm in the input end during the test, the peak phenomenon can be
avoided.
 In the test, there is serious burr phenomenon only when the AC/DC power is used with ceramic chip
capacitors. But electrolytic capacitors and tantalum capacitance won't appear above phenomenon. Please
be sure to pay attention to this point when you use AC/DC power.
 In normal use, when any type of capacitor is used with battery or the supply of fire power, the above
phenomenon doesn’t occur.

V12 www.microne.com.cn Page 9 of 14

 ME6209
Type Characteristics (ME6209A40)
（1） Output Voltage VS. Output Current（ Ta = 25 °C） (2) Output Voltage VS. Input Voltage

Output Voltage VS.Output Current Output Voltage VS.Input Voltage

4.2 5
4.5
4.1
Output Voltage(V)

Output Voltage(V)
4 3.5
3.9 3
2.5 Io=0mA
3.8 2
3.7 1.5
1 Io=40mA
3.6
0.5
3.5 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Output Current(mA) Input Voltage(V)

(3) Quiescent Current VS. Input Voltage (4) Dropout Voltage VS. Output Current

Quiescent Current VS.Input Voltage Dropout Voltage VS.Output Current

Quiescent Current(uA)

3.5 600
Dropout Voltage(mV)

3 500
2.5 400
2
300
1.5
1 200
0.5 100
0 0
0 2 4 6 8 10 12 14 16 18 20 0 50 100 150 200 250 300
Input Voltage(V) Output Current(mA)

(5) Output Voltage VS. Temperature（ME6209A33PG）

Output Voltage VS.Temperature

3.35
Output Voltage(V)

3.3

3.25

3.2

3.15

3.1
-45 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

Temperature(℃)

V12 www.microne.com.cn Page 10 of 14

 ME6209

Packaging Information
● Packaging Type: SOT23-3

Millimeters Inches
DIM
Min Max Min Max
A 1 1.5 0.0394 0.0591
A1 0 0.15 0.0000 0.0059
A2 0.9 1.3 0.0354 0.0512
A3 0.6 0.7 0.0236 0.0276
b 0.25 0.5 0.0098 0.0197
c 0.1 0.25 0.0039 0.0098
D 2.8 3.1 0.1102 0.1220
E 2.6 3.1 0.1023 0.1220
E1 1.5 1.8 0.0591 0.0709
e 0.95(TYP) 0.0374(TYP)
L 0.25 0.6 0.0098 0.0236
L1 0.59(TYP) 0.0232(TYP)
θ 0 8° 0.0000 8°
c1 0.2(TYP) 0.0079(TYP)
L1 0.59(TYP) 0.0232(TYP)
θ 0 8° 0.0000 8°
c1 0.2(TYP) 0.0079(TYP)

V12 www.microne.com.cn Page 11 of 14

 ME6209

● Packaging Type: SOT89-3

Millimeters Inches
DIM
Min Max Min Max
A 1.4 1.6 0.0551 0.0630
b 0.32 0.52 0.0126 0.0205
b1 0.4 0.58 0.0157 0.0228
c 0.35 0.45 0.0138 0.0177
D 4.4 4.6 0.1732 0.1811
D1 1.55(TYP) 0.061(TYP)
D2 1.75(TYP) 0.0689(TYP)
e1 3.0(TYP) 0.1181(TYP)
E 2.3 2.6 0.0906 0.1023
E1 3.94 4.4 0.1551 0.1732
E2 1.9(TYP) 0.0748(TYP)
e 1.5(TYP) 0.0591(TYP)
L 0.8 1.2 0.0315 0.0472
θ 45° 45°

V12 www.microne.com.cn Page 12 of 14

 ME6209

● Packaging Type:TO-92

Millimeters Inches
DIM
Min Max Min Max
A 3.3 3.7 0.1299 0.1457
A1 1.1 1.4 0.0433 0.0551
b 0.38 0.55 0.015 0.0217
c 0.36 0.51 0.0142 0.0201
D 4.3 4.7 0.1693 0.185
D1 3.43 一 0.135 一
E 4.3 4.7 0.1693 0.185
e 1.27TYP 0.05TYP
e1 2.44 2.64 0.0961 0.1039
L 14.1 14.5 0.5551 0.5709
h 0 0.38 0 0.015
Φ 一 1.6 一 0.063

V12 www.microne.com.cn Page 13 of 14

 ME6209

 The information described herein is subject to change without notice.

 Nanjing Micro One Electronics Inc is not responsible for any problems caused by circuits or diagrams
described herein whose related industrial properties, patents, or other rights belong to third parties.
The application circuit examples explain typical applications of the products, and do not guarantee the
success of any specific mass-production design.
 Use of the information described herein for other purposes and/or reproduction or copying without the
express permission of Nanjing Micro One Electronics Inc is strictly prohibited.
 The products described herein cannot be used as part of any device or equipment affecting the human
body, such as exercise equipment, medical equipment, security systems, gas equipment, or any
apparatus installed in airplanes and other vehicles, without prior written permission of Nanjing Micro
One Electronics Inc.
 Although Nanjing Micro One Electronics Inc exerts the greatest possible effort to ensure high quality
and reliability, the failure or malfunction of semiconductor products may occur. The user of these
products should therefore give thorough consideration to safety design, including redundancy,
fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community
damage that may ensue.

V12 www.microne.com.cn Page 14 of 14