UNIT-3

QUANTUM MECHANICS

INTRODUCTION
WAVE AND PARTICLE:-

To understand the concept of dual nature one should have the knowledge
of characteristics of particle and wave. It is difficult to understand the concept of a wave, since it is a
physical quantity and physically it can’t be seen. “a wave can be simply defined as spreading out the
disturbance in a medium, in all directions uniformly. It can’t be confined to a part (or) region i.e, it is
not possible to say that the wave is present here or there.

It is easy to understand the concept of a particle, since it is a physical

quantity and physically it can be seen. “A particle is a difinet mass and occupies a particular point”.

The characteristics of wave are wavelength,frequency,wave velocity,amplitude,phase

and intensity etc. and the particle characteristics are mass,velocity,momentum,energy etc.

DE-BROGLIE’S HYPONTHESIS:-

In 1924 de-Broglie extended dual nature to material particles like

electrons, protons & neutrons etc.”According to his hypothesis when particles are accelerated then
those will be spread like a wave with a certain wavelength”

He gave simple mathematical form support his hypothesis as follows.

According to Plank’s and Einstein’s theory,

the energy of a photon whose frequency can be expressed as

E=hυ ………………………………………… (1)

Where h=plank’s constant

According to Einstein mass energy relation,

E=mc2………………………………………… (2)

Where m= mass of the photon.

C= velocity of light.

From(1) and (2) we get

hυ = mc2


h = mc2

ℎ
λ= 

ℎ
λ= ……………………………………. (3)

52
https://www.freshersnow.com/
 In the same way, According to de-Broglie’s hypothesis if an electron mass ‘m’ is moving
with a velocity ‘v’ in the presence of potential ‘V’ then the wavelength associated with that
electron can be expressed as

ℎ
λ=

= ………………………………….(4)

This is called de-Broglie’s equation and energy of electron in terms of potential.

The energy of the electron in terms of potential is E=eV

Kinetic energy of the electron E=1 2 mv2

Above two equastations given energy of electron, Hence

eV=1 2 mv2

Multiplying by ‘m’ on both sides


meV=1 2 m2v2 =


p=√2

Substituting the ‘p’ value in the equation (4) then

λ=
√

The above equation shows wavelength associated with an electron in presence of

potential difference ‘V”.

PROPERTIES OF MATTER WAVES

1. Smaller the mass of the particle, greater is the wavelength associated with it.
2. Smaller the velocity of the particle greater is the wavelength associated with it.
3. When the velocity of the particle v=0, then the wave length λ=∞ so the wave becomes
indeterminate and if v=∞ then λ=0, shows that the matter waves are generated by the
motion of particles.
4. The matter waves are produced where the particles are charged or uncharged. Due to
this reason these are not electromagnetic waves because electromagnetic waves are
produced only the motion of charged particles.
5. The velocity of matter depends on the velocity of material particle, i.e., it is not
constant while the velocity of electromagnetic wave is constant which is equal to
velocity of light.
6. The velocity of matter waves is greater than the velocity of light.

53
https://www.freshersnow.com/
WAVE FUNCTION ‘ψ’ AND ITS PHYSICAL SIGNIFICANCE
The Wave function ‘ψ’ of a quantum mechanical physical system is a mathematical function
which gives all relevant information about the state of system at position ‘r’and instant ‘t’.

In quantum mechanics the result of an observation of a physical system can be known only if the
wave function‘ψ’ of the system is known.

Then ‘ψ’ have following properties

1. ‘ψ’ must be finite everywhere:- If ‘ψ’ is infinite at a particular point, then it would mean an
infinity large probability of finding the particle at that point. This is not possible. Hence
‘ψ’must have a finet or Zero value at any point.

2. ‘ψ’ must be single valued:- Let us consider ‘ψ’ must more than one value at any point. i.e
more than one value of probability of finding the particle at that point. So ‘ψ’ must be single
valued.

3. ‘ψ’ must be continuous.


4. ‘ψ’ must be normalized. i.e  ||2 dv =1.

5. ‘ψ’ mast be vanish at all boundaries.


6.  ||2 dv =0,∞,-ve (or) complexes are not possible.

PARTICLE IN A BOX/POTENTIAL WELL:

Conceder a free particle in an infinitely deep one-dimensional potential box.

Let us consider wave equation for a particle moving along x-axis inside the box

d 2ψ ( x) 8π 2 m
+ 2 ( E − V )ψ ( x) = 0 --------------------- (1)
d 2x h

54
https://www.freshersnow.com/
As the particle is moving inside the box V ( x ) = 0

Thus the equation (1) becomes

d 2ψ ( x) 8π 2 m
+ 2 Eψ ( x) = 0 ------------- (2)
d 2x h

8π 2 m
Let K 2 = E
h2

K 2h2
⇒E= -------------------- (3)
8π 2 m

i.e. The equation (2) becomes

d 2ψ ( x)
2
+ K 2ψ ( x) = 0 ----- (4)
d x
The general solution for the above equation is given by

ψ ( x ) = A sin Kx + B cos Kx ---- (5)

Since the particle cannot penetrate through the box (barrier)

(i) ψ ( x ) = 0 at x = 0 and

(ii) ψ ( x ) = 0 at x = L

From the above condition (i) i.e. ψ ( x ) = 0 at x = 0

ψ ( x ) = A sin Kx + B cos Kx Becomes

0 = A.0 + B.1
⇒B=0
Then the equation (5) becomes

ψ ( x ) = A sin Kx ---------------- (6)

Using the second condition i.e. ψ ( x ) = 0 at x = L the equation (6) can be written as

0 = A.sin KL
As A cannot be zero

sin KL = 0
nπ
K= Where n =1, 2, 3…
L
⇒ The equation (3) can be written as

55
https://www.freshersnow.com/
 K 2 h 2 n 2π 2 h 2 n 2 h 2
⇒E= 2 = 2 2 =
8π m 8π mL 8mL2

n2 h2
⇒ En = ------------- (7)
8mL2

h2
E1 = For n =1
8mL2

4h 2
E2 = For n =2
8mL2

9h 2
E3 = For n =3
8mL2

Thus for each value of n the possible energy can be given by equation (7). From this we can
conclude that the total energy is quantized and the n is known as the principal quantum number.

The value of the constant A can be obtained from the equation (6).i.e. ψ ( x ) = A sin Kx

As the particle is inside the box(barrier) the probability that the particle is found inside the box is
unity

L 2

i.e. ∫ ψ ( x)
0
dx = 1

L
⇒ ∫ A2 sin 2 Kxdx = 1
0

L
1 − cos 2 Kx
⇒A ∫
2
dx = 1
0
2

A2  
L L
⇒ ∫ dx − ∫ cos 2 Kxdx  = 1
2 0 0 
L
A2  1 
⇒  x − 2 K sin 2 Kx  = 1
2 0

L
A2  L 2nπ x  nπ
⇒  x − sin = 1 since K =
2 2nπ L  0 L

A2
⇒ L =1
2

2
⇒ A=
L
56
https://www.freshersnow.com/
 Therefore the normalized wave function can be written as

2 nπ x
ψ n ( x) = sin
L L

The wave function ψ n ( x) and the corresponding energies En which are often called as Eigen
functions and Eigen values respectively describe the quantum states of the particle.
2
The electron wave function ψ n ( x) and the corresponding probability density functions ψ n ( x ) for
the ground and first two excited states of an electron in a potential well are shown in the fig. below.

Important Questions
1. a. Derive time independent Schrödinger wave equation for a free particle?
b. Explain physical significance of wave function?
2. a. Show that energies of a particle in a potential box are quantized?
An electron is confined to a one dimensional potential box of length 2A.U.Calculate
energies corresponding to the second and fourth quantum states in eV. ?
3. a Derive an expression for time dependent Schrödinger wave equation?
4. What are the properties of matter waves?

57
https://www.freshersnow.com/
 Free Electron theory of metals
Classical free electron theory is based on the following postulates:

1. A solid metal is composed of atoms and the atoms have nucleus, around which there are
revolving electrons.

2. In a metal the valance electrons of atoms are free to move throughout the volume of the metal
like gas molecules of a perfect gas in a container

3. The free electrons move in a random directions and collide with either positive ions fixed to the
lattice or other free electrons and collisions are elastic in nature i.e. there is no loss of energy.

4. The movement of free electrons obeys the classical kinetic theory of gasses. The mean K.E. of
3 
a free electron is equal to that of gas molecule  KT  .
2 
5. The electron velocities in a metal obey Maxwell-Boltzman distribution of velocities.

6. The free electrons move in a uniform potential field due to ions fixed in the lattice

7. When an electric field is applied to the metal the free electrons are accelerated. The accelerated
electrons move in opposite direction of the applied.

8. The electric conduction is due to the free electrons only.

ROOT MEAN SQUARE (R.M.S.) VELOCITY:

Let C be the r.m.s velocity of the free electron. then the

1 2
Kinetic energy = mC
2
But according to the classical free electron theory the mean

3 
Kinetic Energy =  KT  .
2 
1 3
∴ mc 2 = KT
2 2
where c = root mean square velocity
3KT
⇒ c=
m

MEAN FREE PATH ( λ ) AND MEAN COLLISION TIME (τ C )

The average distance travelled by an electron between two successive collisions in the presence
of applied filed is known as ‘Mean free path ( λ ) ’.

The time taken by an electron between two successive collisions is known as “Mean Collision
Time (τ C ) ” of the electron

λ m
τc = =λ
c 3KT

58
https://www.freshersnow.com/
DRIFT VELOCITY ( vd ):
It is the average velocity acquired by the free electrons of a metal in a particular direction
during the application of the electric field.

ELECTRICAL CONDUCTVITY IN METALS:

Let us consider a conductor of length l and area of cross section A

The volume of the conductor = Al

If there are n number of electrons per unit volume of the metal

then the total number of electrons in the metal = Aln

If e is the charge of the electron then the total charge q due to all electrons in the conductor is
given by q = Aln.e

Let t be the time taken by the electron to move from one end to other end then

ch arg e q A ln e
Current ( I ) = = =
time t t

l
But = vd
t

∴ I = Anevd

I J
⇒ vd = =
Ane ne
I
Where J = current density =
A
In a metal the current density J is given bythe equation

J = nevd -----------(1)

Where n = number of electrons per Unit volume, e = electron charge and vd = drift velocity

If E is the applied electric field then the electric force acting on a free electron is given by

F = eE --------------------(2)

From Newton’s IInd law F = ma -----------------------------------(3)

59
https://www.freshersnow.com/
 From (2) and (3) ma = eE

eE
i.e. a=
m
vd
but a = drift velocity/collision time =
τc

eE
vd = aτ c = τc
m

eE ne 2 E
∴ J = ne. τc = τ c ...........................(4)
m m
But from microscopic form of ohms law

J = σ E ..................................(5)

On comparing Eq(4)&(5)

ne 2 m
∴ Conductivity σ = τ c or Re sistivity.ρ = 2
m ne τ c

Conductivity may also be expressed in terms of mobility ( µ ) which is defined as drift velocity
per unit electric field

vd e
µ= = τc
E m

From (4) σ = neµ

RELAXATION TIME (τ r )

Under the influence of an external electric field free electrons attain a directional velocity
of motion. If the field is switched off the velocity starts decreasing exponentially. Such a process
that tends to restore equilibrium is called relaxation process.

If vo is the velocity at t = 0 at which the field is switched off.

The velocity at any time is given by

−t
τr
v = vo e

In the above expression τ r = relaxation time

If t = τ r

−t
vo
v = vo e τr
= vo e −1 =
e
60
https://www.freshersnow.com/
 1
∴ Relaxation time τ r is defined as the time required for the electron to reduce its velocity to of
e
1
its initial value. (OR) time taken for the drift velocity to decay of its initial value.
e

Failure of classical free electron theory:

1. The phenomena such as photo electric effect, Compton Effect and black body radiation could not
be explained by classical free electro theory.
2. According to classical theory the value of specific heat of metals is given by 4.5R (R =Universal
gas constant) where as the experimental value is nearly 3R(Dulang Petit law)
3. Electrical conductivity of semiconductor or insulator could not be explained by using this model.
K
4. According to classical free electron model is constant.(Widemann-franz law) as this not
σT
constant at low temperatures.
5. Ferromagnetism could not be explained by this theory
6. According to classical free electron theory,
Resistivity
m m 3KT 1 3KTm
ρ= 2
= 2 =
ne τ c ne m λ ne 2 λ

ρ= T

But according to experiments ραT

QUANTUM FREE ELECTRON THEORY:

Somerfield applied quantum mechanics to explain conductivity phenomenon in metals. He has

improved the Drude- Lorentz theory by quantizing the free electron energy and retaining the
classical concept of force motion of electrons at random.

ASSUMPTIONS

1. The electrons are free to move with in the metal like gaseous molecules. They are confined to the
metal due to surface potential.

2. The velocities of electrons obey Fermi-Dirac distribution because electrons are spin – half
particles.

3. The electrons would go into different energy levels and obey Pauli’s exclusion principle.

61
https://www.freshersnow.com/
 4. The motion of the electron is associated with a wave called matter wave, according to the
deBroglie hypothesis.

5. The electrons can not have all energies but will have discrete energies according to the equation
n2 h2
En = where a is the dimension of the metals.
8ma 2
Derive an expression for electrical conductivity by using quantum free electron theory

According to Quantum theory

p = mv = K -----(1)
h 2π
Where  = , K=
2π λ
Differentiating equation (1) w.r.t to t
dv  dK
a= =
dt m dt
At equilibrium the lorentz force F = −eE acting on the electron is equal and opposite to the
product of mass and acceleration of the electron
i.e.

eE = ma
 dK
⇒m = eE
m dt

eE
⇒ dK = dt ---(2)

Integrating (2) between the limits 0 and t

t t
eE
∫ dK = ∫
0 0

dt

eE
K (t ) − K (0) = t

eE
∆K = tc where tc =men collision time.

∆K
But J = ne∆v and ∆v = 
m
∆K  eE eEt
∆v =  = t=
m m  m
ne2 Et
∴J =
m*
From microscopic form of Ohm’s law

J =σE

ne2t
∴σ = This is the expression for the electrical conductivity.
m*
62
https://www.freshersnow.com/
FERMI DIRAC DISTRIBUTION:
In quantum theory different electrons occupy different energy levels at O`K. Electrons obey
Pauli’s exclusion principle. As the electrons receive energy they are excited to higher levels
which are unoccupied at O K. The occupation of electrons obeys Fermi-Dirac distribution law.
The particles that obey Fermi-Dirac distribution law are called Fermions.

The Fermi-Dirac distribution function at a temperature T is given by

1
f (E) = ( E − E f )/ KT
e +1

Where E f = Fermi energy, f ( E ) =the probability that a state of energy (E) is filled.

n2h2
(I) At T=O K for E > E f E=
8ma 2

1
f (E) = ∞
=1
e +1
This means that all the energy state below E f are filled.

For E > E f

1
f (E) = ∞
= 0 Means that all the energy levels above E f are empty.
e +1
From this we define Fermi level as it is the level at 0K below which all the levels are filled and
above which all the levels are empty or it is the highest occupied state at 0K

(2) At T>0 and E = E f

1 1
f (E) = =
1+1 2
Fermi level is the state at which the probability of electron occupation is ½ at any temperature.

63
https://www.freshersnow.com/
FERMI ENERGY:

The Fermi energy is a concept in quantum mechanics referring to the energy of the highest
occupied quantum state in a system of Fermions at absolute zero temperature.

For the one dimensional infinite square well the energy of the particle is given by

n2 h2
E=
8ma 2
Suppose now instead of one particle in this box we haven particles in the box and that particles
are fermions with spin ½ then only two particles can have the same energy.i.e. Two particles have
the same energy of

h2
E1 =
8ma 2
Two particles having energy

4h 2
E2 =
8ma 2
∴All the energy levels up to n=N/2 are occupied and all the higher levels are empty.

( N / 2)2 h 2 N 2h2
E f = EN / 2 = =
8ma 2 32ma 2

N 2h2
Ef =
32ma 2

DENSITY OF STATES

The number of states with energy less than E f is equal to the number of states that lie within a
sphere of radius n f in a region of K–space where nx , n y and nz are positive.
1 4
∴ N = 2 × × π n3f
8 3
1 4 3N 3N 1
∴ N = 2 × × π n3f = ⇒ n f = ( )3
8 3 π π
So the Fermi energy

64
https://www.freshersnow.com/
  2π 2 n 2f  2π 2 3 N 23
Ef = = ( )
2ma 2 2ma 2 π
4 2

 2 π 2 3N 32  2 π 3 (3N )
3
 2 3 N π 2 23  2 3 N π 2 23
Ef = ( ) = 2
= ( ) = ( )
2m a 2 π 2m 3 3 2m a 3 2m V
(a )
2 2
2m V 3
∴N = 2 ( 2 ) Ef
3
 3π
2m 32 V
3

⇒ N = ( 2 ) ( 2 )E f
2

 3π
dN 3 2m 32 V
1
2
Therefore density of states: D ( E ) = = ( 2 ) ( 2 )E f
dE 2  3π
V 2m 32 2
1

D( E ) = ( ) Ef
2π 2  2
Therefore the total number of energy states per unit volume per unit energy range
3
1 2m 32 2
1 1
D( E ) 1 (2m) 2 3 2
Z (E) = = ( ) E f = 8π E f
V 2π 2  2 2π 2 h3
3 1
4π 2
Z ( E ) = 3 (2m) 2 E f
h
Therefore the number of energy states in the energy interval E and E + dE are
3 1
4π 2
Z ( E )dE = 3 (2m) 2 E f dE
h

Important questions
1. a. Explain the salient features of classical free electron theory
b. On the basis of classical free electron theory, derive the expressions for i) drift Velocity, ii)
current density iii) mobility?
c. What are drawbacks of classical free electron theory of materials?
2. a. Explain Fermi-Dirac distribution for electrons in a metal. Discuss its variation with temperature?
b. Explain the terms ‘Mean free path’ ‘Relaxation time’ and ‘Drift velocity’ of an electron in a
metal?
c. Discuss the origin of electrical resistance in metals?
3. a. Derive the expression for electrical conductivity on the basis of quantum free electron theory?
b. Explain i) Fermi energy?
c. Evaluate the Fermi function for an energy KT above Fermi energy?

65
https://www.freshersnow.com/
 BAND THEORY OF SOLIDS
BLOCH THEORM:

Metals and alloys are crystalline in nature. When the electron move into the periodic ion
core, it enters into the periodic potential i.e. potential is minimum at the positive ion sites and
maximum between the two ions.

The one dimensional Schrödinger wave for this case is

∂ 2ψ 8π 2 m( E − V )
+ ψ =0
∂x 2 h2
The periodic potential V ( x ) may be defined as

V ( x) = V ( x + a )

Bloch has shown that the one dimensional solution of the form

ψ ( x) = eikx .uk ( x) = eika .uk (a )

Where uk ( x ) = u k ( x + a )

ψ ( x + a) = eik ( x + a ) .uk ( x + a)

= eikx eika .uk ( x + a )

= eika eikx .uk ( x)

ψ ( x + a) = eikaψ ( x)

This is referred as Bloch condition.

66
https://www.freshersnow.com/
KRONIG-PENNEY MODEL:

The free electrons in a metal move under a periodic potential due to regularly arranged
positive ions. The nature of the energies of the electron is determined by solving Schrödinger
wave equation. For simplicity, the periodic potential is taken in the form of regular o-ne
dimensional array of square well potentials.

Within the wall the electron has potential energy

V = 0, 0 < x < a

Outside the wall the electron has the PE

V = V0 , −b < x < 0

∴ the Schrödinger wave equation for the two regions are

∂ 2ψ 8π 2 mE
+ = 0, 0 < x < a -----------(1)
∂x 2 h2

∂ 2ψ 8π 2 m( E − V )ψ
+ = 0, −b < x < 0 -------------(2)
∂x 2 h2

8π 2 mE
Let α 2 =
h2

8π 2 m(V0 − E )
And β 2 =
h2

Then (1) and (2) becomes

∂ 2ψ
2
+ α 2ψ = 0, ----------------------(3)
∂x

∂ 2ψ
− β 2ψ = 0, ------------------------(4)
∂x 2

On solving equations (3) and (4) and by applying Bloch Theorem we get

sin α a
P + cos α a = cos ka ------------- (5)
αa

67
https://www.freshersnow.com/
 mabV0
Where P =
2

8π 2 mE h 2α 2
and α 2 = ⇒ E =
h2 8π 2 m

sin α a
The nature of the equation is illustrated by the plot i.e. drawn between P + cos α a and
αa
α a and at the same time the RHS having the value between +1 and -1

In the above graph only some of the range of α a values are allowed indicating the a
limiting range of energies are allowed. Allowed energy region is indicated by dark region and the
forbidden region is indicated by dotted lines.

Special cases:

(i) If P → ∞ the allowed band reduces to single energy level. This is the special case of
electron trapped.

(ii) If P → 0
cos α a = cos ka
k =α
8π 2 mE h2k 2 h 2 4π 2
k2 =α2 = ⇒ E = =
h2 8π 2 m 8π 2 m λ 2
h 2 m 2v 2 1 2
⇒E= = mv
2m h 2 2
Therefore Total energy =KE+PE
⇒ Potential Energy V = 0
And this is the case of free electron.

68
https://www.freshersnow.com/
Finally we conclude that

(i) Electrons insolids are permitted to be in allowed energy bands separated by forbidden
energy gaps.
(ii) Allowed energy band width increases with α a
(iii) P → ∞ is the case of electron trapped and
P → 0 is the case of classical free particle

ORIGIN OF ENERGY BANDS:

In an isolated atom the electrons are tightly bound and have discrete sharp energy levels.
When two identical atoms are brought closure the outermost orbit of these atoms overlaps and
interacts. Then the energy levels corresponding to those atoms are split into two. If more atoms
are brought together more levels are formed and for a solid of N atoms each of energy levels of
an atom split into N levels of

Depends on the degree of overlap of electrons of adjacent atoms and is largest for
outermost atomic electrons.

The electrons in the inner shells are strongly bound to their nucleus while the electrons in
the outer most shells are not strongly bound to the nucleus. The electrons in the outermost shell
are called valance electrons. The band formed by the energy levels containing the valance
electrons is known as valence band.

Valence Band:

The band formed by the energy levels of valence electrons is called valence band. Or the
band having highest occupied band energy. It may be partial or completely filled.

69
https://www.freshersnow.com/
 Conduction band:

This is the lowest unfilled energy band. This is empty or partially filled.

Forbidden Energy gap:

The conduction band and valence band are separated by a region or gap known as
forbidden band. In this there is no electron exist.

CLASSIFICATION OF MATERIALS INTO CONDUCTORS, SEMICONDUCTORS

AND INSULATORS:

INSULATOR:

In case of insulators the forbidden band is wide. Due to this free electrons cannot jump
from valence band to conduction band. In insulators the energy gap between Valence and
conduction band is of the order of 10eV.

CONDUCTORS:

In case of conductors there is no forbidden band the valence band and conduction band
overlap each other. Here plenty of electrons are available for electronic conduction.

SEMICONDUCTORS:

In semiconductors there is small forbidden band exist between valence band and
conduction band. In semiconductors forbidden band gap is between 0.7 to 1.1 eV. For
semiconductors the electrical properties lie between insulators and good conductors.

EFFECTIVE MASS OF THE ELECTRON:

The effective mass of the electron is the mass of the electron when it is accelerated in a
periodic potential and is denoted by m*

When an electron is placed in a periodic potential and it is accelerated with the help of
electric field. Then the mass of the electron is varied. That varied mass is called effective mass
m* .

Consider the free electron as a wave packet. The group velocity vg corresponding to particle
velocity is

70
https://www.freshersnow.com/
 dω
vg =
dK

Where K is wave vector and ω is angular velocity of the electron.

dν 2π dE 1 dE
vg = 2π = =
dK h dK  dK

dν g 1 d 2 E 1 d 2 E dK
But acceleration a = = =
dt  dKdt  dK 2 dt

dp dK
But K = p ⇒ = =F
dt dt

dK F
⇒ =
dt 

1 d 2E F
∴a =
 dK 2 

2
⇒ F = 2 .a
d E
dK 2

But

2 2
m a = 2 .a ⇒ m = 2
* *

d E d E
2
dK dK 2

Special classes:

d 2E
(1). If is positive then the effective mass is positive
dK 2

d 2E
(2) If is negative then the effective mass is negative.
dK 2

d 2E
(3) If =0 then the effective mass becomes ∞
dK 2

71
https://www.freshersnow.com/