New UVC Class SuperSpeed USB Bridge Demo

New from FTDI Chip is the FT602 UVC Class SuperSpeed USB Bridge device. This device
extends the FT60x SuperSpeed series by adding a UVC1.1 class solution to the already
successful FT600 and FT601 products. It provides a 32 bit parallel interface to the
application hardware and a UVC class USB port, allowing captured data to be transferred.

UVC 1.1
* F-HD@60 fps USB 3.0 *
HDMI-RX
Altera Device

FT602
Cyclone-
IV
F-HD FPGA
Camera
*Camera and TV monitor images shown for reference only and are not indicative of the actual hardware used in demo design.

The DEMO components: The DEMO performance:

 FT602 SuperSpeed USB bridge • Full-HD streams up to 60 fps (Buffer less)

• Standard USB Video Class (UVC) is
 HDMI to parallel translator (Altera FPGA) natively supported by most operation
 HDMI receiver IT6605 systems
 Windows PC • Display on any application capable of
 VLC video player application to supporting UVC class streams
display the video

The Application
A Full High Definition camera, configured to output 1080p60 video, delivers data over HDMI
to the HDMI receiver which is then connected to the Altera FPGA. The received data is
formatted in the FPGA and transmitted to the FT602 device over a 32-bit FIFO bus interface
using FT600 FIFO bus protocol. The FT602 then delivers UVC class data over USB at
60fps for display on any application capable of supporting UVC class camera devices, e.g. a
VLC Player.

FTDI USB Bridge Devices

FTDI offer a vast range of USB bridging solution, including Full speed, Hi-speed and
SuperSpeed data rates to many different protocols including UART, SPI, FIFO, and I2C. We
also offer solutions for USB hosting as well as peripherals. Information on FTDI USB
solutions may be found at: http://www.ftdichip.com/Products/ICs.htm
 New UVC Class SuperSpeed USB Bridge Demo
New from FTDI Chip is the FT602 UVC Class SuperSpeed USB Bridge device. This device
extends the FT60x SuperSpeed series by adding a UVC1.1 class solution to the already
successful FT600 and FT601 products. It provides a 32 bit parallel interface to the
application hardware and a UVC class USB port, allowing captured data to be transferred.

UVC 1.1
* F-HD@60 fps
HDMI-RX USB 3.0 *
Altera Device

FT602
Cyclone-
IV
F-HD FPGA
Camera
*Camera and TV monitor images shown for reference only and are not indicative of the actual hardware used in

The DEMO components: The DEMO performance

 FT602 SuperSpeed USB bridge • Full-HD streams up to 60 fps (Buffer less)

• Standard USB Video Class (UVC) is
 HDMI to parallel translator (Altera FPGA) natively supported by most operation
 HDMI receiver IT6605 systems
 Windows PC • Display on any application capable of
 VLC video player application to supporting UVC class streams
display the video

The Application
A Full High Definition camera, configured to output 1080p60 video, delivers data over HDMI
to the HDMI receiver which is then connected to the Altera FPGA. The received data is
formatted in the FPGA and transmitted to the FT602 device over a 32-bit FIFO bus interface
using FT600 FIFO bus protocol. The FT602 then delivers UVC class data over USB at 60fps
for display on any application capable of supporting UVC class camera devices, e.g. a VLC
Player.

FTDI USB Bridge Devices

FTDI offer a vast range of USB bridging solution, including Full speed, Hi-speed and
SuperSpeed data rates to many different protocols including UART, SPI, FIFO, and I2C. We
demo design.

also offer solutions for USB hosting as well as peripherals. Information on FTDI USB
solutions may be found at: http://www.ftdichip.com/Products/ICs.htm