Scribd
Upload
20 views

Airworthiness Directives Final Rules: 80-07-09

Uploaded by

Jorge Ortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

Airworthiness Directives Final Rules: 80-07-09

Uploaded by

Jorge Ortega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

30/10/24, 14:28 about:blank

AIRWORTHINESS DIRECTIVES FINAL RULES: 80-07-09


CITATION: This information is not available.

PAGE NUMBER:

DOCKET NUMBER: Unknown

AMENDMENT: 39-3724

AD NUMBER: 80-07-09

SUBJECT HEADING: Airworthiness Directives: GATES LEARJET Specified Models

ACTION:

SUMMARY:

DATES: Effective May 1, 1980.

ADDRESSES:

FOR FURTHER INFORMATION CONTACT:

SUPPLEMENTARY INFORMATION:

REGULATORY TEXT:
80-07-09 LEARJET: Amendment 39-3724. Applies to the following models or series and serial number
airplanes certificated in all categories:

NOTE: A "series" includes all models in a number series, i.e., 25 series includes Models 25, 25A, 25B, 25C, etc.

MODEL OR SERIES SERIAL NUMBERS


23 (Model) 23-003 through 23-099
24 (Series) 24-100 through 24-357
25 (Series) 25-003 through 25-291
28 (Model) 28-001 through 28-005
29 (Model) 29-001 and 29-002
35 (Series) 35-001 through 35-274 and 35-278
36 (Series) 36-001 through 36-044

COMPLIANCE: Required as indicated unless already accomplished.

To assure that the cabin main entrance upper door will open, in the event of an emergency, accomplish the
following:

A) Within the next 150 hours time-in-service after the effective date of this Airworthiness Directive (AD),
modify the cabin main entrance upper door by, (1) Drilling access holes, installing new mechanism pivot bolts
drilled for safety wire and drilling safety wire holes in surrounding structure, as applicable, and (2) safety wiring
the bolts, all in accordance with instructions in Gates Learjet Corporation Airplane Modification Kit Number
about:blank 1/2
30/10/24, 14:28 about:blank

AMK79-9.

B) Issuance of a special flight permit in accordance with FAR 21.197 is permitted for the purpose of moving
affected airplanes to a location where the modification required by this AD can be accomplished.

C) Any equivalent means of compliance with this AD must be approved by the Chief, Wichita Engineering and
Manufacturing District Office, Federal Aviation Administration, Room 238, Terminal Building No. 2299, Mid-
Continent Airport, Wichita, Kansas 67209; telephone (316) 942-4219.

This amendment becomes effective May 1, 1980.

FOOTER:

about:blank 2/2

You might also like