Scribd
Upload
77 views1 page

Crack Width Moment+Axial Force

Crack Width Moment+Axial Force

Uploaded by

Angus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
77 views1 page

Crack Width Moment+Axial Force

Crack Width Moment+Axial Force

Uploaded by

Angus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Crack Width Calculations (ACI 350-06/ACI 224R-01)

Input Data
Material Properties :-
Concrete Compressive Strength FC` 48 Mpa Moduls Of Rupture Modifier 1.00

Concrete Compressive Strength Fy 420 Mpa

Section Properties :-
Section Width b 1000 mm Exposure Condition
Section Thickness h 300 mm wc-all 0.00 mm
User Define
Cover To Center Of Closest Tension Bars dc 50 mm wc-all 0.20 mm
Cover To Center Of Tension Bars dcg 50 mm Max Stress Of Tension Steel
Important Note:- As Per ACI350R-01 When The Concrete Cover Exceed 50mm Use Only 50mm Normal Enviromental Exposure-One Way Member

Applied Service Moment :-


Applied Tension Axial Force (+ve) Ts 180 Kn

Applied Service Moment Ms 220 Kn.m Method 01


Section Reinfocement :- wcr = 11*10^-6*β*Fs*(A*dc)^1/3 Method 01
No Dia Area/mm2 wcr = 2*(Fs/Es)*β*((dc)^2+(S/2)^2))^0.5Method 02
Main 7 16 1406.72
Tension RFT
Extra 7 16 1406.72
Spacing Between Bars S 150 mm

Compression RFT No Dia Area/mm2


Compression RFT Main 7 16 1406.72
Spacing Between Bars S 150 mm

Output Data

Concrete Modulus Of Elasticity Ec 32562.555 Mpa


Steel Modulus Of Elasticity Es 200000.00 Mpa
Modular Ratio n 6.142 U.Less
N.A Depth X 75.308 mm
Gross Moment Of Inertia Ig 2250000000.00 mm4
Cracked Moment Of Inertia Icr 674343031.640621 mm4
Moduls Of Rupture Fr 4.30 Mpa

Cracking Moment Mcr 64.43 Kn.m Mcr < Ma Need Crack Width Calculations
Stress On Tension Steel Fs 378.69 Mpa Fs > Fs max - Unsafe
Max Stress On Tension Steel Fs-max 229.47 Mpa
Check For High Bond Bars Fs-bond 280.00 Mpa Fs > Fs bond - Unsafe
Depth Factor β 1.286 U.Less
Effective Tension Area A 7142.857 mm2

Allowable Crack Width wcr-all 0.20 mm


Eng Abdulrahman Elgohary
Actual Crack Width wcr-act 0.380 mm Unsafe Actual > Allowable Tel 0525273709 / United Arab Emirates
Email [email protected]
Actual Crack Width wcr-act 0.439 mm Unsafe Actual > Allowable Youtube Eng Abdulrahman Elgohary
Facebook Eng Abdelrahman Elgouhry

https://www.youtube.com/watch?v=dwR6147ZPhg&t=2s Watch & Learn

You might also like