0% found this document useful (0 votes)
152 views4 pages

Math m1 Jan 2010

ADVANCED SUBSIDIARY GCE MATHEMATICS Mechanics 1 Candidates answer on the Answer Booklet. Read each question carefully and make sure that you know what you have to do before starting your answer. Give non-exact numerical answers correct to 3 significant figures unless a different degree of accuracy is specified in the question or is clearly appropriate.

Uploaded by

Hoang Van Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
152 views4 pages

Math m1 Jan 2010

ADVANCED SUBSIDIARY GCE MATHEMATICS Mechanics 1 Candidates answer on the Answer Booklet. Read each question carefully and make sure that you know what you have to do before starting your answer. Give non-exact numerical answers correct to 3 significant figures unless a different degree of accuracy is specified in the question or is clearly appropriate.

Uploaded by

Hoang Van Nguyen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ADVANCED SUBSIDIARY GCE

MATHEMATICS
Mechanics 1

4728

Candidates answer on the Answer Booklet OCR Supplied Materials: 8 page Answer Booklet List of Formulae (MF1) Other Materials Required: None

Monday 25 January 2010 Morning


Duration: 1 hour 30 minutes

*4728*
* 4 7 2 8 *

INSTRUCTIONS TO CANDIDATES Write your name clearly in capital letters, your Centre Number and Candidate Number in the spaces provided on the Answer Booklet. Use black ink. Pencil may be used for graphs and diagrams only. Read each question carefully and make sure that you know what you have to do before starting your answer. Answer all the questions. Do not write in the bar codes. Give non-exact numerical answers correct to 3 signicant gures unless a different degree of accuracy is specied in the question or is clearly appropriate. The acceleration due to gravity is denoted by g m s2 . Unless otherwise instructed, when a numerical value is needed, use g = 9.8. You are permitted to use a graphical calculator in this paper.

INFORMATION FOR CANDIDATES The number of marks is given in brackets [ ] at the end of each question or part question. You are reminded of the need for clear presentation in your answers. The total number of marks for this paper is 72. This document consists of 4 pages. Any blank pages are indicated.

OCR 2010 [H/102/2695] RP9F03

OCR is an exempt Charity

Turn over

2 1

A particle P is projected vertically downwards from a xed point O with initial speed 4.2 m s1 , and takes 1.5 s to reach the ground. Calculate
(i) the speed of P when it reaches the ground, (ii) the height of O above the ground, (iii) the speed of P when it is 5 m above the ground. [2] [2] [2]

Two horizontal forces of magnitudes 12 N and 19 N act at a point. Given that the angle between the two forces is 60 , calculate
(i) the magnitude of the resultant force, (ii) the angle between the resultant and the 12 N force. [5] [3]

3
9 m s1 2 m s1 2.75 m s1

m kg

0.8 kg

0.4 kg

Three particles P, Q and R, are travelling in the same direction in the same straight line on a smooth horizontal surface. P has mass m kg and speed 9 m s1 , Q has mass 0.8 kg and speed 2 m s1 and R has mass 0.4 kg and speed 2.75 m s1 (see diagram).
(i) A collision occurs between P and Q, after which P and Q move in opposite directions, each with speed 3.5 m s1 . Calculate (a) the value of m, (b) the change in the momentum of P. (ii) When Q collides with R the two particles coalesce. Find their subsequent common speed. [4] [2] [3]

OCR 2010

4728 Jan10

3 4

60

Particles P and Q, of masses 0.4 kg and 0.3 kg respectively, are attached to the ends of a light inextensible string. The string passes over a smooth xed pulley and the sections of the string not in contact with the pulley are vertical. P rests in limiting equilibrium on a plane inclined at 60 to the horizontal (see diagram).
(i) (a) Calculate the components, parallel and perpendicular to the plane, of the contact force exerted by the plane on P. [4] (b) Find the coefcient of friction between P and the plane. [2]

P is held stationary and a particle of mass 0.2 kg is attached to Q. With the string taut, P is released from rest.
(ii) Calculate the tension in the string and the acceleration of the particles. [4]

v (m s1)
11 8

B A

3 0 0 20

t (s)

The (t, v) diagram represents the motion of two cyclists A and B who are travelling along a horizontal straight road. At time t = 0, A, who cycles with constant speed 8 m s1 , overtakes B who has initial speed 3 m s1 . From time t = 0 B cycles with constant acceleration for 20 s. When t = 20 her speed is 11 m s1 , which she subsequently maintains.
(i) Find the value of t when A and B have the same speed. (ii) Calculate the value of t when B overtakes A. [3] [5]

(iii) On a single diagram, sketch the (t, x) graphs for the two cyclists for the time from t = 0 until after B has overtaken A. [3]
OCR 2010 4728 Jan10

Turn over

4 6

A swimmer C swims with velocity v m s1 in a swimming pool. At time t s after starting, v = 0.006t2 0.18t + k, where k is a constant. C swims from one end of the pool to the other in 28.4 s.
(i) Find the acceleration of C in terms of t. (ii) Given that the minimum speed of C is 0.65 m s1 , show that k = 2. (iii) Express the distance travelled by C in terms of t, and calculate the length of the pool. [2] [5] [5]

7
10

A winch drags a log of mass 600 kg up a slope inclined at 10 to the horizontal by means of an inextensible cable of negligible mass parallel to the slope (see diagram). The coefcient of friction between the log and the slope is 0.15, and the log is initially at rest at the foot of the slope. The acceleration of the log is 0.11 m s2 .
(i) Calculate the tension in the cable. [5]

The cable suddenly breaks after dragging the log a distance of 10 m.


(ii) (a) Show that the deceleration of the log while continuing to move up the slope is 3.15 m s2 , correct to 3 signicant gures. [2] (b) Calculate the time taken, after the cable breaks, for the log to return to its original position at the foot of the slope. [9]

Copyright Information OCR is committed to seeking permission to reproduce all third-party content that it uses in its assessment materials. OCR has attempted to identify and contact all copyright holders whose work is used in this paper. To avoid the issue of disclosure of answer-related information to candidates, all copyright acknowledgements are reproduced in the OCR Copyright Acknowledgements Booklet. This is produced for each series of examinations, is given to all schools that receive assessment material and is freely available to download from our public website (www.ocr.org.uk) after the live examination series. If OCR has unwittingly failed to correctly acknowledge or clear any third-party content in this assessment material, OCR will be happy to correct its mistake at the earliest possible opportunity. For queries or further information please contact the Copyright Team, First Floor, 9 Hills Road, Cambridge CB2 1GE. OCR is part of the Cambridge Assessment Group; Cambridge Assessment is the brand name of University of Cambridge Local Examinations Syndicate (UCLES), which is itself a department of the University of Cambridge. OCR 2010 4728 Jan10

You might also like