Ceiling Diffusers

Supply Air Grilles

Return Air Grilles

Louvers

Jet Diffusers

Floor Diffusers

Dampers

Damper Actuators

VAV Terminal Units

Flexible Air Duct

 JET DIFFUSERS CONTENTS

CONTENTS
• CB Ball Spout Jet Diffuser
• CX Jet Diffuser
• SWV Variable Swirl Diffuser
• CF Jet Diffuser
• CK Jet Diffuser
• CL Jet Diffuser (Pankah Louver)
• CG Jet Diffuser

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
 JET DIFFUSERS

CB Ball Spout Jet Diffuser

■ Description
CB ball spout jet diffuser provides ventilation to places where distribution of air via
ceiling diffuser is not possible or practical. In a big open space area where ceiling
.outlets are not able to supply air uniformly to the corners, CB will be a solution. Air
is supplied into the space at high velocity with high induction causes the supply air
to mix with the room air effectively. Due to its pleasant appearance, it can be used
in the large room such as concert, airport, theatre, museum etc.

■ Materials
• Nozzle: Aluminum.
• Face : Aluminum.

■ Surface Finish
• White powder coat.

■ Features
• Easy adjustment.
• Directional air flow pattern: +/- 30˚ deflection, 360˚ rotation.
• Suitable for exposed ductwork or surface mounted.
• Suitable for wall installation.
• Low noise levels.
• Low pressure requirement.
• Provides high terminal velocity, long distance throw and supply air
into inaccessible area.

■ Standard Sizes
• 160, 200, 250, 315, 400, 630 (mm)

■ CB Construction Illustrations

Top View Section View

■ CB Physical Dimension Unit:mm

Size N F Z H A D W
160 158 216 82 106 10 168 178
200 198 273 108 127 14 208 218
250 248 318 136 159 23 258 268
315 313 400 174 189 29 323 333
400 398 483 230 223 47 408 418
630 628 715 403 260 148 638 648

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CB page 1 of 3
 JET DIFFUSERS

CB Ball Spout Jet Diffuser

■ CB Air Flow Performance Data
Neck Size Nozzle Vel.
3 5 7 10 13 15 17 20
(mm) (m/s)
Tot. Press (mmAq) 0.5 1.7 3.0 6.5 10.5 13.5 17.0 21.0
CMH 57 95 133 190 247 285 323 380
160 Throw (m) 3.0 -7.5 5.5 - 11.0 6.0 - 13.0 11.5 -24.0 14.0 - 30.0 18.0 -39.0 20.0 - 45.0 21.5 - 51.0
NC - - - 20 25 30 34 37
CMH 99 165 231 330 429 495 561 660
200 Throw (m) 5.0 - 10.0 7.5 - 16.0 11.0 - 22.5 16.0 - 31.0 20.0 - 40.0 22.5 - 45.0 25.0 - 50.0 30.0 - 57.0
NC - - - 22 29 33 37 42
CMH 157 261 366 523 680 784 889 1046
250 Throw (m) 6.0 - 12.0 10.0 - 20.0 14.0 - 27.0 19.0 - 40.0 25.0 - 50.0 30.0 - 55.0 32.0 - 57.0 36.0 - 62.0
NC - - - 23 30 35 40 44
CMH 257 428 599 856 1113 1284 1455 1712
315 Throw (m) 8.0 - 16.0 12.0 - 25.0 16.0 - 35.0 23.0 - 47.0 30.0 - 55.0 35.0 - 60.0 40.0 - 65.0 45.0 - 70.0
NC - - - 27 35 40 44 47
CMH 449 748 1047 1496 1944 2244 2543 2991
400 Throw (m) 10.0 - 20.0 16.0 - 32.0 22.0 - 45.0 32.0 - 58.0 40.0 - 66.0 47.0 - 73.0 51.0 - 77.0 57.0 - 83.0
NC - - 25 36 42 46 48 52
CMH 1378 2296 3214 4592 5970 6888 7806 9184
630 Throw (m) 15.6 - 31.1 24.4 - 49.3 34.5 - 71.8 49.3 - 91.6 76.1 - 105.0 73.7 - 113.3 81.1 - 118.0 89.7 - 124.0
NC 27 33 38 44 53 56 59 63
• Throw is based on terminal velocities of 0.5m/s – 0.25m/s respectively.
• NC value is based on room absorption of 10dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• All values are tested at 0˚ angle of air discharge.
• Corrected values with different angle of discharge.
• The above performance data generated are tested with axial installation.

Angle of Discharge 0˚ 30˚

Tot. Press 1 1.2
Throw 1 0.85
NC 0 2
Example: If angle of discharge is 30˚, to obtain the total pressure drop, use a multiplier of 1.2, for throw use a multiplier of 0.85, for NC values, it will be NC plus 2.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CB page 2 of 3
 JET DIFFUSERS

CB Ball Spout Jet Diffuser

Directing air downwards Directing air upwards

Directing air towards left Directing air towards right

■ CB Suggested Specification
CB-A Ball Spout Diffuser shall be suitable for throw of 20 meters distance with optimum acoustic properties. The nozzle shall consist of a face circular-
mounting flange with aerodynamically shaped nozzle formed in one piece and no obstacle in the airflow pathway. The rear connection element shall have a
peripheral gasket for mounting on to the duct wall. The flange shall be detachable from the nozzle with simple tools. The nozzle shall be adjustable with 30-
degree deflection in all direction and 360 degree rotation from the face of the diffuser without using any tools. The nozzle and installation flange shall be
aluminum. The diffuser shall be epoxy coated and furnished to architectural requirement.

■ CB Order Code
Model Material Neck Size (mm)
CB A (Aluminum) 160, 200, 250, 315, 400, 630
Example: CB-A-400mm

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CB page 3 of 3
 JET DIFFUSERS

CX Jet Diffuser
■ Description
ASLI CX ball type jet diffusers are excellent for spot heating and cooling which
provides ventilation to places where distribution of air via ceiling diffuser is not
possible or not practical. The nozzle of the diffuser can be rotated in any direction
off center. Kitchen, factories, stadiums or any places where the conditioned air
needed to move from an inaccessible place to the work environment is easily
handled by ASLI CX jet diffuser.

■ Materials
• Nozzle: CX-A, 1.0mm thickness aluminum sheet roll formed.
• Frame: CX-A, 1.0mm thickness aluminum sheet roll formed.

■ Surface Finish
• Baked white powder coated as standard.

■ Features
• Economical.
• Long throw capability.
• High air flow capability.
• Excellent for spot heating or cooling.
• Suitable for exposed ductwork or surface mounted.
• Suitable for ceiling or wall installation.
• Air flow direction is adjustable.
• Maximum rotation angle up to 45˚ in all direction.
• Self rotation around nozzle center axis in 360˚ .

■ Standard Sizes
• 125ø, 150ø, 200ø, 250ø (mm)

■ CX Construction Illustrations

Top View Side View

■ CX Physical Dimension Unit:mm

N = Neck Size D F H G
125 145 69 97 65
150 165 65 110 75
200 215 93 135 100
250 285 110 170 140

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CX page 1 of 2
 JET DIFFUSERS

CX Jet Diffuser
■ CX Air Flow Performance Data
Neck Size Nozzle Area Nozzle Vel.
2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0
(mm) (m2) (m/s)
CMH 30 59 89 119 149 178 208 238
St. Press. (mmAq) 0.5 1.9 4.8 8.2 10.6 18.1 24.7 34.6
125 0.0033
NC - - - 21 25 30 35 38
Throw (m) 2.6 - 3.8 3.8 - 7.7 5.4 - 10.8 7.4 - 14.1 9.0 - 15.9 10.3 - 20.5 11.5 - 25.1 13.3 - 26.9
CMH 40 79 119 158 198 238 277 317
St. Press. (mmAq) 0.5 1.8 4.8 7.7 11.7 21.8 24.7 31.9
150 0.0044
NC - - - 23 25 30 33 36
Throw (m) 2.6 - 4.9 4.1 - 7.7 6.4 - 12.8 8.0 - 16.7 9.5 - 20.5 11.5 - 25.7 14.1 - 28.5 12.8 - 32.1
CMH 71 142 213 284 356 427 498 569
St. Press. (mmAq) 0.4 1.6 3.7 6.4 11.7 16.8 24.5 31.9
200 0.0079
NC - - - 25 30 36 38 42
Throw (m) 3.1 - 6.4 5.1 - 10.3 7.7 - 15.9 10.0 - 21.8 13.3 - 26.9 15.9 - 32.1 18.5 - 38.5 20.5 - 41.6
CMH 139 277 416 554 693 832 970 1109
St. Press. (mmAq) 0.4 1.6 3.7 6.4 11.7 16.8 24.5 31.9
250 0.0154
NC - - - 23 29 33 37 41
Throw (m) 3.8 - 7.7 7.7 - 14.1 10.8 - 23.1 14.1 - 28.7 18.5 - 38.0 21.5 - 41.6 25.7 - 48.7 28.7 - 57.7
• Throw is based on terminal velocity of 0.5m/s and 0.25m/s respectively.
• Throw is based on isothermal condition.
• NC value is based on room absorption of 10dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• The performance data is tested in zero degree deflection in axial installation (wall installation).

Directing Air Upwards Directing Air Downwards

■ CX Suggested Specification
Type CX-A Jet Diffuser shall be made of 1.0mm thickness aluminum roll formed. The nozzle shall be adjustable with 45˚ deflection towards all direction. The
nozzle shall be able to rotate 360˚ around the center axis through the nozzle. The frame shall consist of an outer frame and inner frame with a gasket in
between. The frames shall be detachable from the nozzle with simple tools. The diffuser shall be epoxy coated and furnished to architectural requirement.

■ CX Order Code
Model Material Neck Size (mm)
CX A (Aluminum) 125,150, 200, 250
Example: CX-A-200mm

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CX page 2 of 2
 JET DIFFUSERS

SWV Variable Swirl Diffuser

■ Description
SWV variable swirl diffusers are one of latest series of products of our company.
They are applicable for spaces with a height of more than 3.8m, such as airport,
waiting hall in stations, theatre, stadium, industrial workshop, business hall, large
conference room, reception hall, shared space in department store, and etc.

SWV variable swirl diffusers adopts hydrokinetics principle for the design of its
blade, by which the blade pushes the current by means of swirl with a certain
initial velocity to achieve a larger throw distance, bigger space covered by a jet,
and more efficient convection current effect. Meanwhile the blade could change its
quadrant angle to adapt to different conditions by blowing rotating current of
horizontal, slant, and vertical directions.

■ Features
• Supply 4 optional specifications, i.e., 315, 400, 630, 800.
• Averaging air blowing, and variable shape of air current.
• Easy installation; connected and hung directiy with hooks.
• White powder coat oven baked as standard.

■ Three Conditions

The blade could be adjusted to refigeration The blade could be adjusted to normal The blade could be adjusted to warming
mode to adapt to summer conditions. temperature mode to adapt to the fresh wind mode to adapt to winter condition. Warm
Cold air blows out by means of diffusing conditions in spring and autumn to supply jets are amassed vertically to be supplied
swirls to facilitate air convection. fresh wind into the indoors in large scale. to areas where there are human activities.

■ SWV Performance Data

Size (mm) Air Flow Performance
CMH 300 400 500 600 700 800
Tot. Press (mmAq) 1.1 1.7 2.7 4.1 5.1 7.1
315
Throw (m) 4.5 6.5 7.2 12 13.5 16
NC 23 28 35 40 43 47
CMH 600 700 800 1000 1200 1400
Tot. Press (mmAq) 1.0 2.2 2.7 4.4 6.0 8.0
400
Throw (m) 7 9 11 14 17 20
NC 23 27 32 37 43 47
CMH 1250 1500 1750 2000 2500 3000
Tot. Press (mmAq) 1.5 1.8 2.6 3.2 4.8 7.3
630
Throw (m) 10 14 16 17 23 26
NC 24 27 33 36 42 48
CMH 1500 1750 2000 2500 3000 3500
Tot. Press (mmAq) 1.2 1.7 2.2 3.3 4.8 6.8
800
Throw (m) 10 12 14 18 23 27
NC 23 27 32 37 43 48
• The above performance data are tested with diffuser installed vertically dropdown from the ceiling. • Throws are based on isothermal condition.
• The above performance data are tested with blades fully open, which provides maximum vertical throw. • NC values are based on room absorption of 10dB, re 10-12 watts.
• Throws are based on terminal velocity 0.25m/s, vertically throw from ceiling.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

SWV page 1 of 3
 JET DIFFUSERS

SWV Variable Swirl Diffuser

■ Specifications

V Structure H Structure

K 70

øD
H1

H4
H2

G Structure

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

SWV page 2 of 3
 JET DIFFUSERS

SWV Variable Swirl Diffuser

■ SWV Physical Dimension Unit: mm
Specs
øB øD H1 H2 H3 H4 K ø D1 ø D2 T
Sizes
ø 315 315 250 480 203 425 340 435 480 380 63
ø 400 400 300 600 238 530 419 500 565 464 80
ø 630 630 400 850 383 750 616.5 750 871 708 125
ø 800 800 500 1130 568 1000 849 1000 1077 871 160

■ Installations
Owing to its multiple functions, SWV variable swirl diffuser could either be fixed or hung on the ceiling. The air flow effect is the same in both fixed installation
and hang installation. And the flow angle can be adjusted continuously.

300mm

DA

Fixed installation for enclosed Hanging installation for space such as 300mm into ceiling; continuously
suspended ceiling; horizontal and industrial workshop; continuously variable blowing angle;
vertical blowing directions; variable blowing angle;

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

SWV page 3 of 3
 JET DIFFUSERS

CF Jet Diffuser
■ Description
ASLI CF Jet Diffusers are designed for application where a flooding or dumping of
conditioned air is required without the need to control the direction of airflow. CF
jet diffusers are suitable to be installed on exposed ductwork or surface mounted
in stadium, factory, theatre and etc.

■ Materials
• Frame: CF-A, 1.0mm thickness aluminum sheet roll formed.

■ Surface Finish
• Baked white powder coat as standard.

■ Features
• Economical.
• Long throw capability.
• High air flow capability.
• Suitable for exposed ductwork or surface mounted.
• Suitable for ceiling or wall installation.

■ Standard Sizes
• 100ø, 150ø, 200ø, 250ø, 300ø, 350ø, 400ø (mm)

■ CF Construction Illustrations

Top View Section View

■ CF Physical Dimension Unit:mm

N = Neck Size D = Duct Size W = Wall Size F = Face Size H = Height
100 106 120 160 70
150 158 170 225 95
200 205 220 275 115
250 255 265 320 140
300 308 325 370 155
350 360 375 420 170
400 410 450 480 195

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CF page 1 of 2
 JET DIFFUSERS

CF Jet Diffuser
■ CF Air Flow Performance Data
Neck Size Neck Area Nozzle Vel.(m/s) 2 3 4 5 6 7 8 10
(mm) (m2) Tot. Press (mmAq) 0.5 1.1 1.4 2.2 2.9 4.4 5.3 8.2
100 0.0079 CMH 57 85 113 141 170 198 226 283
Throw (m) 1.6 2.6 3.6 4.5 5.4 6.4 7.2 10
NC - - 21 26 30 34 36 42
125 0.0177 CMH 127 191 254 318 382 445 509 636
Throw (m) 2.6 4 5.5 6.8 8.2 9.6 11 15.2
NC - - 22 27 31 34 37 43
160 0.0314 CMH 226 339 452 565 679 792 905 1131
Throw (m) 3.8 5.6 7.4 9.2 11 13 14.7 20.5
NC - - 24 28 32 35 39 45
200 0.0491 CMH 353 530 707 884 1060 1237 1414 1767
Throw (m) 4.6 7 9.5 11.6 13.8 16.2 18.5 25.4
NC - - 24 28 33 36 40 46
250 0.0707 CMH 509 763 1018 1272 1527 1781 2036 2545
Throw (m) 5.6 8.4 11.2 14 16.8 19.5 22.2 31
NC - - 24 29 33 36 40 46
300 0.0962 CMH 693 1039 1385 1732 2078 2425 2771 3464
Throw (m) 6.5 9.6 13 16.3 19.5 22.6 25.6 35.5
NC - - 24 29 33 37 41 47
400 0.1257 CMH 905 1357 1810 2262 2714 3167 3619 4524
Throw (m) 7.4 10.8 15.2 18.8 22.4 26.4 29.4 33.1
NC - - 25 31 34 37 42 49
• Throw is based on terminal velocity of 0.25m/s.
• Throw is based on isothermal condition.
• NC value is based on room absorption of 10dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• The performance data is tested in axial installation (wall installation).

■ CF Suggested Specification
CF-A jet diffuser shall be made of 1.0mm thickness aluminum roll formed. The diffuser shall be epoxy coated and furnished to architectural requirement.

■ CF Order Code
Model Material Neck Size (mm)
CF A (Aluminum) 100, 150, 200, 250, 300, 350
Example: CF-A-200mm

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CF page 2 of 2
 JET DIFFUSERS

CK Jet Diffuser
■ Description
ASLI CK jet diffusers are made out of a fixed outer frame and adjustable concentric
rings, which specially designed for high volume and long throw applications. The
concentric rings can be adjusted 45˚ upward and downward or leftward and
rightward depending on the installation position to control the direction of airflow.
CK jet diffusers are suitable to be installed on exposed ductwork or surface
mounted in stadium, factory, theatre and etc.

■ Materials
• Outer frame: CK-A, 1.0mm thickness aluminum sheet roll formed.
• Concentric rings: CK-A, 1.0mm thickness aluminum sheet roll formed.

■ Surface Finish
• Baked white powder coat as standard.

■ Features
• Economical.
• Long throw capability.
• High air flow capability.
• Suitable for exposed ductwork or surface mounted.
• Suitable for ceiling or wall installation.
• Air flow direction is adjustable up to 45˚ upward and downward or leftward and
rightward.

■ Standard Sizes
• 150ø, 200ø, 250ø, 300ø, 350ø, 400ø (mm)

■ Accessories
• Radial blade damper (C1)

■ CK Construction Illustrations

Top View Section View

■ CK Physical Dimension Unit:mm

N = Neck Size D = Duct Size W = Wall Size F = Face Size H = Height
150 160 170 225 95
200 210 220 275 115
250 260 265 320 140
300 315 325 370 155
350 365 375 420 170
400 415 450 480 195

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CK page 1 of 4
 JET DIFFUSERS

CK Jet Diffuser
■ CK Control of Air Flow Direction

Pointing downwards Pointing upwards

Pointing towards left Pointing towards right

The direction of the airflow has to be predetermined before installation. If the airflow direction is upwards or downwards, the diffuser has to be installed with
circular support shaft placing horizontally. If the airflow direction is leftward or rightward, the diffuser has to be installed with circular support shaft placing
vertically.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CK page 2 of 4
 JET DIFFUSERS

CK Jet Diffuser
■ CK Air Flow Performance Data
Neck Size Neck Area Neck Vel.(m/s) 2 3 4 5 6 7 8 10
(mm) (m2) Tot. Press (mmAq) 0.7 1.5 1.7 2.5 3.1 4.7 6.5 8.4
CMH 127 191 254 318 382 445 509 636
150 0.0177 Throw (m) 2.6 4 5.5 6.8 8.2 9.6 11 15.2
NC - 120 24 30 37 43 47 50
CMH 226 339 452 565 679 792 905 1131
200 0.0314 Throw (m) 3.8 5.6 7.4 9.2 11 13 14.7 20.5
NC - 20 24 30 37 43 47 50
CMH 353 530 707 884 1060 1237 1414 1767
250 0.0491 Throw (m) 4.6 7 9.5 11.6 13.8 16.2 18.5 25.4
NC - - 22 27 32 36 40 44
CMH 509 763 1018 1272 1527 1781 2036 2545
300 0.0707 Throw (m) 5.6 8.4 11.2 14 16.8 19.5 22.2 31
NC - - 23 27 32 36 40 44
CMH 693 1039 1385 1732 2078 2425 2771 3464
350 0.0962 Throw (m) 6.5 9.6 13 16.3 19.5 22.6 25.6 35.5
NC - - 24 28 34 37 41 45
CMH 905 1357 1810 2262 2714 3167 3619 4524
400 0.1257 Throw (m) 7.4 10.8 15.2 18.8 22.4 26.4 29.4 33.1
NC - - 25 28 35 37 42 46
• Throw is based on terminal velocity of 0.25m/s
• Throw is based on isothermal condition
• NC value is based on room absorption of 10dB, re 10-12 watts
• Dash (-) in space indicates NC value less than 20
• The performance data is tested in zero degree deflection in axial installation (wall installation)

■ CK Installation

Ductwork mounted Wall or ceiling mounted

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CK page 3 of 4
 JET DIFFUSERS

CK Jet Diffuser
Radial blade damper (C1) can be installed at the rear of CK to adjust the air flow rate. CK could be connected to a flexible duct. The opening of the C1 can be
adjusted by a screwdriver from the face of the CK.

Flexible Air Duct

C1 Screwdriver

CK

CK could be mounted on a panel and supplied as a unit. The CK panel could be installed on the wall or ceiling.

Two CK panel Three CK panel Four CK panel

■ CK Suggested Specification
CK-A jet diffuser shall be suitable for throw of 10 meters distance with optimum acoustic properties. The outer frame and concentric rings shall be made of
1.0mm thickness aluminum sheet roll formed. The concentric rings shall be adjustable with 45˚ deflection upward or downward without using any tools. The
concentric rings shall be connected to the outer frame with two circular shafts in one axis. The concentric rings shall be connected to each other with two
circular shafts in an axis, which is perpendicular to the shafts connected to the outer frame. The concentric rings shall have an aerodynamic profile to diffuse
the air. The outer frame shall be detachable from the concentric rings with simple tools. The diffuser shall be epoxy coated and furnished to architectural
requirement.

■ CK Order Code
Model Material Neck Size (mm) Accessories
A (Aluminum)
CK 150, 200, 250, 300, 350 C1
T (Galvanized Steel)
Example: CK-A-200mm-C1

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CK page 4 of 4
 JET DIFFUSERS

CL Jet Diffuser (Pankah Louver)

■ Description
ASLI CL ball type jet diffusers are excellent for spot heating and cooling which
provides ventilation to places where distribution of air via ceiling diffuser is not
possible or not practical. The nozzle of the diffuser can be rotated in any direction
off center. The air volume is adjustable by turning a knob on the nozzle. No special
tools or techniques are required. Kitchen, factories, stadiums or any places where
the conditioned air needed to move from an inaccessible place to the work
environment is easily handled by ASLI CL jet diffuser. For industrial applications,
air showers with numerous ASLI CL jet diffusers is an effective way to eliminate
contaminants.

■ Materials
• Nozzle: CL-A, 1.0mm thickness aluminum sheet roll formed.
• Frame: CL-A, 1.0mm thickness aluminum sheet roll formed.
• Curved blade: CL-A, 1.0mm thickness aluminum sheet roll formed.

■ Surface Finish
• Baked white powder coat as standard.

■ Features
• Economical.
• Long throw capability.
• High air flow capability.
• Excellent for spot heating or cooling.
• Suitable for exposed ductwork or surface mounted.
• Suitable for ceiling or wall installation.
• Air flow volume is adjustable.
• Air flow direction is adjustable.
• Maximum rotation angle up to 45˚ in all direction.
• Self rotation around nozzle center axis in 360˚.

■ Standard Sizes
• 125ø, 150ø, 200ø, 250ø (mm)

■ CL Construction Illustrations

Top View Section View

■ CL Physical Dimension Unit:mm

N = Neck Size D F H G
125 145 92 120 65
150 165 90 135 75
200 215 118 160 100
250 285 170 230 140

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CL page 1 of 3
 JET DIFFUSERS

CL Jet Diffuser
■ CL Air Flow Performance Data
Neck Size Nozzle Area Nozzle Vel.
2.5 5 7.5 10 12.5 15 17.5 20
(mm) (m2) (m/s)
CMH 30 59 89 119 149 178 208 238
St. Press. (mmAq) 0.5 1.7 4.5 7.7 9.9 16.9 23.1 32.3
125 0.0033
NC - - - 20 24 29 34 37
Throw (m) 2.9 - 4.3 4.3 - 8.6 6.0 - 12.0 8.3 - 15.7 10.0 - 17.7 11.4 - 22.8 12.8 - 27.9 14.8 - 29.9
CMH 40 79 119 158 198 238 277 317
St. Press. (mmAq) 0.5 1.6 4.5 7.2 10.9 20.4 23.1 29.8
150 0.0044
NC - - - 22 24 29 32 35
Throw (m) 2.9 - 5.4 4.6 - 8.6 7.1 - 14.3 8.8 - 18.5 10.5 - 22.8 12.8 - 28.5 15.7 - 31.6 14.3 - 35.6
CMH 71 142 213 284 356 427 498 569
St. Press. (mmAq) 0.4 1.5 3.5 6.0 10.9 15.6 22.8 29.8
200 0.0079
NC - - - 24 29 35 37 41
Throw (m) 3.4 - 7.1 5.7 - 11.4 8.6 - 17.7 11.1 - 24.2 14.8 - 29.9 17.7 - 35.6 20.5 - 42.8 22.8 - 46.2
CMH 139 277 416 554 693 832 970 1109
St. Press. (mmAq) 0.4 1.5 3.5 6.0 10.9 15.6 22.8 29.8
250 0.0154
NC - - - 22 28 32 36 40
Throw (m) 4.3 - 8.6 8.6 - 15.7 12.0 - 25.7 15.7 - 31.9 20.5 - 42.2 23.9 - 46.2 28.5 - 54.2 31.9 - 64.1
• Throw is based on terminal velocity of 0.5m/s - 0.25m/s respectively.
• Throw is based on isothermal condition.
• NC value is based on room absorption of 10dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• The performance data is tested in zero degree deflection in axial installation with blade fully open (wall installation).

Directing air upwards Directing air downwards

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CL page 2 of 3
 JET DIFFUSERS

CL Jet Diffuser

100% closed 50% open 100% open

CL could be mounted on a panel and supplied as a unit. The CL panel could be installed on the wall or ceiling

Two CL panel Three CL panel Four CL panel

■ CL Suggested Specification
CL-A jet diffuser shall be made of 1.0mm thickness aluminum roll formed. The nozzle shall be adjustable with 45˚ deflection towards all direction. The nozzle
shall be able to rotate 360˚ around the center axis through the nozzle. The curved blade shall be adjustable with a knob at the surface of the nozzle to close or
open the nozzle outlet without using any tools. The curved blade shall be shaped to the nozzle shape and located inside the nozzle. The frame shall consist of
an outer frame and inner frame with a gasket in between. The frames shall be detachable from the nozzle with simple tools. The diffuser shall be epoxy
coated and furnished to architectural requirement.

■ CL Order Code
Model Material Neck Size (mm)
CL A (Aluminum) 125, 150, 200, 250
Example: CL-A-200mm

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CL page 3 of 3
 JET DIFFUSERS

CG Jet Diffuser
■ Description
ASLI CG drum type jet diffusers consist of fixed outer frame, adjustable inner core
and blades. The inner core and blades be adjusted to 30˚ upward or downward and
45˚ towards left and right respectively. The blades are joined with linkage therefore
it is easy to adjust the blades by just adjusting a single blade. ASLI CG drum type
jet diffusers are particularly useful for large conditioned space, where it is
impractical to bring down the ductwork close to the occupant. Example of such
installations is shopping malls, warehouses, air terminals, factories, and etc. Due
to its large opening area, ASLI CG drum type jet diffusers provide maximum air
volume with minimum pressure drop and noise level.

■ Materials
• Outer Frame: CG-T, 1.0mm thickness galvanized steel.
• Inner core: CG-T, 1.0mm thickness galvanized steel.
• Blade: CG-T, 1.0mm thickness galvanized steel.

■ Surface Finish
• Baked white powder coat as standard.

■ Features
• Long throw capability.
• High air flow capability.
• Low pressure drop.
• Low noise level.
• Suitable for exposed ductwork or surface mounted.
• Suitable for wall installation.
• Air flow direction is adjustable.
• Inner core can be adjusted up to 30˚ upward or downward.
• Blades can be adjusted up to 45˚ left or right.
• Blades are joined with linkages, easy adjustment.

■ Standard Sizes
• No standard sizes. Made to custom.

■ Accessories
• Opposed blade damper (G1).

■ CG Construction Illustrations

Top View Section View

■ CG Physical Dimension Unit:mm

Neck Size D = Duct Size W = Wall Size F = Face Size G = Outlet Size K = Height
WXH W + 20 W + 30 W + 60 150 150 ~ 250
H + 20 H + 30 H + 60 200
250

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CG page 1 of 3
 JET DIFFUSERS

CG Jet Diffuser
■ CG Air Flow Performance Data
Neck Size Neck Area Nozzle Vel.(m/s) 1 1.5 2 2.5 3 3.5 4 4.5
(mm) (m2) Tot. Press (mmAq) 0.4 1.0 1.7 2.5 3.6 4.9 6.4 8.0
500 X 250 0.125 CMH 450 675 900 1125 1350 1575 1800 2025
Throw (m) 4.0 - 8.3 6.1 - 10.5 8.3 - 12.0 9.4 - 13.3 10.5 - 14.6 11.2 - 16.0 12.0 - 17.1 12.7 - 18.0
NC - - - - 24 29 34 38
650 X 250 0.1625 CMH 585 878 1170 1463 1755 2048 2340 2633
Throw (m) 4.7 - 9.4 6.8 - 11.7 9.4 - 13.5 10.5 - 14.9 11.6 - 16.3 12.7 - 18.0 13.4 - 18.9 14.2 - 20.4
NC - - - 20 26 32 36 40
750 X 250 0.1875 CMH 675 1013 1350 1688 2025 2363 2700 3038
Throw (m) 5.0 - 10.1 7.5 - 12.6 10.1 - 14.6 11.5 - 16.2 12.6 - 18.0 13.7 - 19.5 14.8 - 20.8 15.5 - 22.0
NC - - - 21 26 32 37 41
900 X 250 0.225 CMH 810 1215 1620 2025 2430 2835 3240
Throw (m) 5.3 - 11.2 8.3 - 13.7 11.2 - 16.0 12.6 - 17.9 13.7 - 19.6 14.7 - 21.1 15.9 - 22.6
NC - - - 22 29 34 38
1000 X 250 0.25 CMH 900 1350 1800 2250 2700 3150 3600
Throw (m) 5.6 - 12.0 9.0 - 14.6 12.0 - 17.1 13.4 - 18.8 14.8 - 21.0 15.9 - 22.4 17.0 - 24.3
NC - - 16 24 30 35 39
500 X 300 0.15 CMH 540 810 1080 1350 1620 1890 2160 2430
Throw (m) 4.2 - 9.0 6.8 - 11.2 9.0 - 13.0 10.4 - 14.6 11.2 - 16.0 12.2 - 17.4 13.0- 18.5 13.6 - 19.6
NC - - - 19 25 30 35 39
650 X 300 0.195 CMH 702 1053 1405 1755 2106 2475 2808 3159
Throw (m) 4.7 - 10.1 7.5 - 12.5 10.0 - 14.7 11.5 - 16.3 12.4 - 18.0 13.6 - 19.6 14.4 - 20.6 15.0 - 22.4
NC - - - 20 27 32 36 40
750 X 300 0.225 CMH 810 1215 1620 2025 2430 2835 3240
Throw (m) 5.3 - 11.2 8.3 - 13.7 11.2 - 16.0 12.6 - 17.9 13.7 - 19.6 14.7 - 21.1 15.9 - 22.6
NC - - - 22 29 34 38
900 X 300 0.27 CMH 972 1458 1944 2430 2916 3402 3888
Throw (m) 5.8 - 12.4 9.0 - 14.9 12.2 - 17.6 13.7 - 19.6 14.8 - 21.2 16.2 - 23.0 17.3 - 24.7
NC - - - 23 30 36 40
1000 X 300 0.3 CMH 1080 1620 2160 2700 3240 3780
Throw (m) 6.4 - 13.0 9.7 - 16.0 13.0 - 18.5 14.8 - 21.0 15.9 - 22.6 17.3 - 24.5
NC - - 18 25 31 37
350 X 350 0.1225 CMH 440 662 882 1103 1323 1544 1764 1985
Throw (m) 4.0 - 8.3 6.1 - 10.5 8.3 - 12.0 9.4 - 13.2 10.5 - 14.4 11.0 - 15.8 12.0 - 17.0 12.5 - 17.8
NC - - 11 18 24 29 34 38
550 X 350 0.175 CMH 630 945 1260 1575 1890 2205 2520 2835
Throw (m) 4.1 - 9.8 7.2 - 12.2 9.5 - 14.2 10.9 - 15.6 12.0 - 17.4 13.1 - 18.5 13.8 - 19.9 14.6 - 21.1
NC - - 14 20 27 32 37 41
650 X 350 0.2275 CMH 820 1228 1638 2048 2457 2867 3276
Throw (m) 5.3 - 11.2 8.3 - 13.7 11.2 - 16.0 12.6 - 18.0 13.7 - 19.6 14.7 - 21.2 16.0 - 22.7
NC - - 15 22 29 34 38
750 X 350 0.2625 CMH 945 1418 1890 2363 2835 3308 3780
Throw (m) 5.8 - 12.3 9.0 - 14.8 12.0 - 17.4 13.5 - 19.5 14.7 - 21.1 16.2 - 22.9 17.3 - 24.5
NC - - 16 23 30 36 40
900 x 350 0.315 CMH 1135 1700 2268 2835 3402 3970
Throw (m) 5.4 - 13.3 9.8 - 16.2 12.9 - 19.0 14.7 - 21.1 16.2 - 23.0 17.6 - 24.8
NC - - 18 25 32 38
1000 x 350 0.35 CMH 1260 1890 2520 3150 3780 4410
Throw (m) 6.9 - 14.2 10.6 - 17.4 13.8 - 20.0 15.8 - 22.4 17.3-24.5 18.9 - 26.2
NC - - 20 27 34 39
• Throw is based on terminal velocity of 0.5 m/s and 0.25 m/s respectively. • Corrected values with different angle of discharge.
• Throw is based on isothermal condition. Angle of discharge 0˚ 15˚ 30˚ Eg: If angle of discharge is 30˚, to obtain
• NC value is based on room absorption of 10dB, re 10-12 watts. Tot. Press 1 1.25 1.79 the totalpressure loss, use a multiplier
• Dash (-) in space indicates NC value less than 20. of 1.79, for throw use a multiplier of
Throw 1 0.83 0.66
0.66; for NC values, it will be NC add 6.
• The performance data is tested in zero degree deflection in axial installation (wall installation). NC 0 +3 +6

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CG page 2 of 3
 JET DIFFUSERS

CG Jet Diffuser

Directing air upwards Directing air downwards

Directing air towards right Directing air towards left

Optional Model: Double layer CG (CGD)

Double layer CG Double layer blades directing air towards left and right

■ CG Suggested Specification
CG-T drum type jet diffuser shall be suitable for throw of 15 meters distance with optimum acoustic properties. The outer frame, inner core and blades shall
be made of 1.0mm thickness galvanized steel. The inner core shall be adjustable with 30˚ deflection upward and downward around the horizontal center axis
of diffuser without using any tools. The blades shall be joined with linkage. All the blades shall move together in one direction when one blade are being
adjusted. The blades shall be adjustable with 45˚ deflection towards left and right without using any tools. The diffuser shall be epoxy coated and furnished
to architectural requirement.

■ CG Order Code
Model Material WXH Accessories
CG, CGD T (Galvanized Steel) Varies G1
Example: CG-T-500mmX250mm-G1

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CG page 3 of 3