G

■ GEAR PULLER, G Type

(Heavy Duty Type for Professional Use)
G3 G4・6・8 G10 G12〜24
(G3〜8 with handle)
Features ● The reaching range of the claws can be extended by
S shifting the claw holes (2 holes for G4〜10, 3 holes
GEAR PULLERS

Accessories for G12〜24).

GP grease Single-size ratchet Power pusher
● For G4〜24, the steel ball inside the adaptor
(10g) wrench with grip (SW8N) T
(all size) (G10〜24) (G15〜24) significantly reduces frictional resistance.
● H indicates the claw reaching length when, with D
H
t at shortest length, the forcing screw is lifted to the
D
highest point.

Size
（mm）
D t H T S Forcing Breaking N.W.
Item No.
Pulled object Pulled object width Claw reaching Forcing screw hex. screw load (kN) （kg）
Claw tip thickness dia.
diameter when D at max. length width across flats
G3 40〜75 30 55 3.5 14 12 20 0.4
G4 50〜100 45 100 4.1 17 14 40 0.8
G6 60〜150 60 150 5.3 19 18 60 1.9
G8 80〜200 100 240 6.7 22 22 80 3.8
G10 100〜250 120 250 7.4 30 28 100 6
G12 120〜300 125 275 8 32 32 120 9
Gear pullers G15 150〜375 130 320 8.7 41 38 150 11
(2-claw type)
G18 180〜450 140 370 9.8 46 44 180 15
G24 280〜600 175 575 17.5 46 44 240 45

Gear pullers
(auto-grip,
G type)
S
T1 GL
T
■ GEAR PULLER, GL Type
H D1
(Heavy Duty Type for Professional Use)
Gear pullers
(3-claw type) t
GL4〜8 (with handle) GL10〜18 D
Features
● With longer claws and 3 holes for all size, the reaching range of the claws
Accessories GP grease Single-size ratchet Power pusher can be even more extended than G type.
(10g) wrench with grip (SW8N) ● One claw is designed with a groove for hook bolt (for bearing separator BS).
Shock speed
(all size) (GL10〜18) (GL15・18) ● The steel ball inside the adaptor significantly reduces frictional resistance.
pullers
● H indicates the claw reaching length when, with D at shortest length, the
forcing screw is lifted to the highest point.

Size
（mm）
Sliding gear D t H D1 T T1 S Forcing Breaking N.W.
pullers Item No.
Pulled object Pulled object width Claw reaching Bolt groove Forcing screw hex. screw load (kN) （kg）
Claw tip thickness dia.
diameter when D at max. length width width across flats

Bearing GL4 50〜100 60 150 10 5.8 4.1 17 14 40 1

pullers, GL6 60〜150 70 190 12 6.7 5.3 19 18 60 2.3
bearing
puller sets GL8 80〜200 100 275 16 7.4 6.7 22 22 80 4.4
GL10 100〜250 125 300 18 8 7.4 30 28 100 7
GL12 120〜300 170 350 20 8.7 8 32 32 120 10
Bearing GL15 150〜375 185 400 24 9.8 8.7 41 38 150 13
insertion
tool sets GL18 180〜450 200 440 27 10.8 9.8 46 44 180 16

Hydraulic
S
GLL
■ GEAR PULLER, GLL Type
pullers,
power
pushers

H
T
(Heavy Duty Type for Professional Use)
t D1

Accessories D Features
GLL4〜8 (with handle) GLL10・12
● With longer claws and 3 holes for all size, the reaching range of the claws can
be even more extended than GL type.
Accessories GP grease Single-size ratchet
● The claws are designed with a groove for hook bolt (for bearing separator BS).
(10g) wrench with grip
(all size) (GLL10・12) ● The steel ball inside the adaptor significantly reduces frictional resistance.
● H indicates the claw reaching length when, with D at shortest length, the
forcing screw is lifted to the highest point.

Size
（mm）
D t H D1 T S Forcing Breaking N.W.
Item No.
Pulled object Pulled object width Claw reaching Bolt groove Claw tip Forcing screw hex. screw load (kN) （kg）
diameter when D at max. length width thickness width across flats dia.
GLL4 50〜100 60 200 10 5.8 17 14 40 1.1
GLL6 60〜150 70 250 12 6.7 19 18 60 2.4
GLL8 80〜200 100 350 16 7.4 22 22 80 4.8
GLL10 100〜250 125 400 18 8 30 28 100 7.5
GLL12 120〜300 170 450 20 8.7 32 32 120 10.6

156 ●For all the appendix of the gear pullers, please refer to P.288
 GJ・GA-N・GN・GZ・GSR・GLJ・GLLJ
■ GEAR PULLER, G, GL, GLL, GT Types Parts

th
leng
full
GJ8

GEAR PULLERS
GA-N
● The reaching range of the claws can be extended by gth
full len
using the 2 or 3 holes and both claws at the top and
bottom. (1 hole for GJ3, 2 holes for GJ4〜10, 3 holes ■ Adaptor (with ball and stop ring)
for GJ12〜24)
Full length Dia.
■ Claw (1 pc) Item No. Applicable puller
（mm） (mm)

Full length G4・GL4・GLL4・

（GT4）
・GT100・（G4S）・G100S・
Item No. Applicable puller GA4N 19.8 16
（mm） GT100S・ABT90・ABT90L・ABW200・BS1S
GJ3 G3 90 G6・GL6・GLL6・
（GTW6） ・GT150・（G6S）
・
GA6N 22 18
GJ4 G4・
（GT4）
・GT100・
（G4S）
・G100S・GT100S 137 G150S・GT150S・SSP5・BPS6・BS2S
GJ6 G6・
（GTW6）
・GT150・
（G6S）
・G150S・GT150S 222.6 G8・GL8・GLL8・
（GT8）
・GT200・
（G8S）
・G200S・
GA8N 24.5 20
GJ8 G8・
（GT8）
・GT200・
（G8S）
・G200S・GT200S 300 GT200S・SSP8
GJ10 G10・
（GT10）
・GT250 340 GA10N G10・GL10・GLL10・
（GT10）
・GT12・GT250 31.5 26
GJ12 G12・GT12 380 GA12N G12・GL12・GLL12・SSP12 36.5 31 Gear pullers
(2-claw type)
GJ15 G15・GT15 450 GA15N G15・GL15・GT15 36.5 35
GJ18 G18・GT18 500 GA18N G18・GL18・GT18 46.5 38
GJ24 G24 800 GA24N G24 46.5 44
Gear pullers
＊ The items in ( ) are discontinued. (auto-grip,
G type)

GN GZ
full length hole pitch Gear pullers
(3-claw type)
● Common for G, GL, GLL types ● Common for G, GL, GLL types
■ Bolt, nut, washer with teeth (1 set of 4 pcs) ● The washer structure can stretch to prevent claw
Full length
Item No.
（mm）
breakage by overload.
Full length
Item No. ■ Washer (1 set of 4 pcs) Shock speed
（mm） GN10 52 Hole pitch pullers
Item No.
GN3 24 GN12 57 Hole pitch （mm）
Item No.
GN4 32.5 GN15 63 （mm） GZ10 110
GN6 42 GN18 63 GZ3 36 GZ12 130
Sliding gear
GN8 48 GN24 84 GZ4 45 GZ15 160 pullers
GZ6 55 GZ18 190
GZ8 100 GZ24 240

Bearing
pullers,
bearing
puller sets
GSR8
th
leng
● No adaptor for GSR3 full
● Common for G, GL, GLL types Bearing
insertion
tool sets
■ Forcing screw, body (with adaptor)
Full length
Item No.
Full length （mm）
Item No.
（mm） GSR10 314 Hydraulic
pullers,
GSR3 120 GSR12 357 power
GSR4 149 GSR15 427 pushers

GSR6 210 GSR18 485

GSR8 300 GSR24 675

Accessories

ngth th
GLJ10 full le eng
GLLJ full l

● With longer claws and 3 holes for all size, the reaching
range of the claws can be even more extended than GJ ● With longer claws and 3 holes for all size, the reaching
claws. (Other parts of GL type are common to G type) range of the claws can be even more extended than GLJ
■ Claw (1 pc) claws. (Other parts of GLL type are common to G type)
Full length
Item No. ■ Claw (1 pc)
Full length （mm） Full length
Item No. Item No.
（mm） GLJ10 430 Full length （mm）
Item No.
GLJ4 221.3 GLJ12 500 （mm） GLLJ8 431
GLJ6 292.6 GLJ15 550 GLLJ4 259.1 GLLJ10 498.4
GLJ8 360 GLJ18 600 GLLJ6 319.6 GLLJ12 564.8

●For all the appendix of the gear pullers, please refer to P.288 157
 G-S
■ GEAR PULLER, G Type (Auto-grip Type)
Feature
● The claws close with the force of a spring, allowing
S easier setting to the object to be pulled and
GEAR PULLERS

G100S
outstanding operability.
G200S The reaching range of the claws can be extended by
setting the longer GL type claws.
Example
H of use
t
G150S D T

Size
（mm）
D t H T S Breaking N.W.
Item No. Forcing
Pulled object Pulled object width Claw reaching Claw tip Forcing screw hex. load
（kN） （kg）
screw dia.
diameter when D at max. length thickness width across flats
G100S 50〜100 45 90 4.1 17 14 40 0.85
G150S 60〜150 60 145 5.3 19 18 60 1.95
G200S 80〜200 100 235 6.7 22 22 80 4.3

GSR-S・GB-S・GP-S・GN-S・GZ-S・GC-S
Gear pullers
(2-claw type)

Gear pullers ■ GEAR PULLER, G Type

Auto-grip Type Parts (2-claw type)
(auto-grip,
G type)

Gear pullers
(3-claw type)

GSR6S
th
leng
full
Shock speed
pullers

GB6S
■ Forcing screw, body (with adaptor) ■ Spring

Sliding gear Item No. Applicable puller Full length

（mm） Item No. Applicable puller
pullers
GSR4S （G4S）
・G100S 154 GB4S （G4S）
・G100S
GSR6S （G6S）
・G150S 215 GB6S （G6S）
・G150S
GSR8S （G8S）
・G200S 311 GB8S （G8S）
・G200S
Bearing
pullers,
bearing
puller sets

Bearing
insertion
tool sets
GN6S
GP6S
full length

Hydraulic ■ Plate ■ Bolt, nut (1 set of 4 pcs)

pullers,
power
pushers
Item No. Applicable puller Item No. Applicable puller Full length
（mm）
GP4S （G4S）
・G100S GN4S （G4S）
・G100S 32.5
GP6S （G6S）
・G150S GN6S （G6S）
・G150S 42
GP8S （G8S）
・G200S GN8S （G8S）
・G200S 48
Accessories

GZ6S
hole pitch GC6S
■ Washer (1 set of 4 pcs) ■ Washer, C type stop ring

Item No. Applicable puller Hole pitch

（mm） Item No. Applicable puller
GZ4S （G4S）
・G100S 45 GC4S （G4S）
・G100S
GZ6S （G6S）
・G150S 55 GC6S （G6S）
・G150S
GZ8S （G8S）
・G200S 100 GC8S （G8S）
・G200S
＊ The items in ( ) are discontinued.
★Claws and adaptors are common parts (see P.157)
158 ●For all the appendix of the gear pullers, please refer to P.288
 Accessories GP grease (10g)
included for
GT
GT12・15・18 ■ GEAR PULLER, GT Type (3-claw Type)
Features
● The reaching range of the claws can be extended by
shifting the claw holes (2 holes for GT100〜250, 3
S

GEAR PULLERS
holes for GT12〜18).
T ● The load is more stable than with 2-claw type.
● The steel ball inside the adaptor significantly reduces
frictional resistance.
GT250
H
t ● H indicates the claw reaching length when, with D
D at shortest length, the forcing screw is lifted to the
highest point.
Size
（mm）
D t H T S Number Breaking
Forcing N.W.
Item No. of claw load
Pulled object Pulled object width Claw reaching Claw tip Forcing screw hex. screw （kg）
hole (
（kN）
diameter when D at max. length thickness width across flats dia.
GT100 50〜100 45 85 4.1 19 18 2 50 1.2
GT150 60〜150 60 140 5.3 22 22 2 75 2.8
GT200 80〜200 100 230 6.7 30 28 2 100 7
GT250 100〜250 120 245 7.4 32 32 2 125 9.5 Gear pullers
GT12 120〜300 125 275 8 32 32 3 125 14 (2-claw type)

GT15 150〜375 130 320 8.7 41 38 3 150 18.5

GT18 180〜450 140 370 9.8 46 44 3 180 26

GTSR・GTN・GTZ
Gear pullers
(auto-grip,
G type)

■ GEAR PULLER GT Type Parts

Gear pullers
(3-claw type)

■ Forcing screw, body (with adaptor)

Shock speed
Item No. Applicable puller Full length
（mm） pullers

GTSR4 （GT4）
・GT100 169
GTSR6 （GTW6）
・GT150 220
GTSR8 （GT8）
・GT200 331
GTSR Sliding gear
GTSR10 （GT10）
・GT250 365 pullers
length
full GTSR12 GT12 365
GTSR15 GT15 419
GTSR18 GT18 472 Bearing
pullers,
bearing
puller sets

■ Bolt, nut, washer with teeth (1 set of 6 pcs) Bearing

insertion
tool sets
Item No. Applicable puller Full length
（mm）
GTN4 （GT4）
・GT100 32.5
GTN6 （GTW6）
・GT150 42 Hydraulic
pullers,
GTN8 （GT8）
・GT200 48
power
GTN
GTN10 （GT10）
・GT250 52 pushers

full length GTN12 GT12 57

GTN15 GT15 63
GTN18 GT18 63 Accessories

■ Washer (1 set of 6 pcs)

Item No. Applicable puller Hole pitch

（mm）
GTZ4 （GT4）
・GT100 45
GTZ6 （GTW6）
・GT150 55
GTZ8 （GT8）
・GT200 100

GTZ GTZ10 （GT10）

・GT250 110

hole pitch GTZ12 GT12 130

GTZ15 GT15 160
GTZ18 GT18 190

＊ The items in ( ) are discontinued.

★Claws and adaptors are common parts (see P.157)
●For all the appendix of the gear pullers, please refer to P.288 159
 GT-S
■ GEAR PULLER, GT Type (Auto-grip Type)
Feature ● The claws close with the force of a
spring, allowing easier setting to the
object to be pulled and outstanding
GEAR PULLERS

S operability.
The reaching range of the claws can be
extended by setting the longer GL type
claws.
H
GT200S
t
T
D

Size
（mm）
D t H T S Breaking N.W.
Item No. Forcing
Pulled object Pulled object width Claw reaching Claw tip Forcing screw hex. load
（kN） （kg）
screw dia.
diameter when D at max. length thickness width across flats
GT100S 50〜100 45 80 4.1 19 18 50 1.5
GT150S 60〜150 60 135 5.3 22 22 75 3.4
GT200S 80〜200 100 225 6.7 30 28 100 8.8

GTSR-S・GTB-S・GTP-S・GTN-S・GTZ-S・GTC-S
Gear pullers
(2-claw type)

Gear pullers ■ GEAR PULLER, GT Type

Auto-grip Type Parts (3-claw type)
(auto-grip,
G type)

Gear pullers
(3-claw type)

GTSR150S
th
leng
full
Shock speed
pullers

GTB150S
■ Forcing screw, body (with adaptor) ■ Spring

Sliding gear Item No. Applicable puller Full length

（mm） Item No. Applicable puller
pullers
GTSR100S GT100S 169 GTB100S GT100S
GTSR150S GT150S 220 GTB150S GT150S
GTSR200S GT200S 331 GTB200S GT200S
Bearing
pullers,
bearing
puller sets

Bearing
insertion
tool sets
GTN6S
full length
Hydraulic GTP150S
pullers, ■ Plate ■ Bolt, nut (1 set of 6 pcs)
power
pushers Item No. Applicable puller Item No. Applicable puller Full length
（mm）
GTP100S GT100S GTN4S GT100S 32.5
GTP150S GT150S GTN6S GT150S 42
Accessories GTP200S GT200S GTN8S GT200S 48

GTZ6S
hole pitch GTC150S
■ Washer (1 set of 6 pcs) ■ Washer, C type stop ring

Item No. Applicable puller Hole pitch

（mm） Item No. Applicable puller
GTZ4S GT100S 45 GTC100S GT100S
GTZ6S GT150S 55 GTC150S GT150S
GTZ8S GT200S 100 GTC200S GT200S
★Claws and adaptors are common parts (see Ｐ.157)
160 ●For all the appendix of the gear pullers, please refer to P.288
 SSP
■ SHOCK SPEED PULLER SET
(Heavy Duty Type for Professional Use)
Features
● Outstanding pulling force for burned or rusted gears or

GEAR PULLERS
pulleys, by giving impacts to the forcing screw with a hammer
(No other pullers have this unique mechanism).
● Steel case as standard acc.
● H indicates the claw reaching length when, with D at shortest
length, the forcing screw is lifted to the highest point.

Example of use
SSP8 S

Accessories
GP grease Hex key wrench Super head spanner Single-size ratchet
(10g) (all size) (SSP5・8) wrench with grip
(all size) (SSP12)

T
H t Gear pullers
D (2-claw type)

Size
（mm）
D t H T S Guaranteed Set N.W. Gear pullers
Item No. Forcing (auto-grip,
Pulled object Pulled object width Claw reaching Claw tip Forcing screw hex. load
（kN） （kg） G type)
screw dia.
diameter when D at max. length thickness width across flats
SSP5 55〜125 125 140 5 19 18 50 3
SSP8 80〜200 175 200 7 22 22 100 6 Gear pullers
SSP12 120〜300 225 270 9 32 32 200 17 (3-claw type)

SPSR・SPJ・SPN・SPA・SPB・SPH・SPU Shock speed

■ SHOCK SPEED PULLER Parts pullers

Sliding gear
ngth pullers
SPSR5 full le SPJ5
full length SPN5 gth
full len
■ Forcing screw, body (with adaptor) ■ Claw (1 pc) ■ Pin (1 pc) Bearing
pullers,
bearing
Item No. Full length
（mm） Item No. Full length
（mm） Item No. Full length
（mm） puller sets

SPSR5 208 SPJ5 210 SPN5 33.5

SPSR8 270 SPJ8 296 SPN8 44.5
Bearing
SPSR12 355 SPJ12 400 SPN12 66.4 insertion
tool sets
D

Hydraulic
D1

pullers,
SPA5 SPH5 L power
SPB5 pushers

■ Adjustment screw ■ Body ■ Auxiliary adaptor with step

Size
（mm）
Item No. Item No. Item No.
L D D1 Accessories

SPA5 SPB5 SPH5 45 18 10

SPA8 SPB8 SPH8 60 20 13
SPA12 SPB12 SPH12 85 26 15

SPU5
■ Handle

Item No.

SPU5
SPU8
SPU12

●For all the appendix of the gear pullers, please refer to P.288 161
 GS・GS-M
■ SLIDING GEAR PULLER, GS Type
Features
● The claws slide horizontally and show great pulling capacities
in confined places.
GEAR PULLERS

● By resetting the claws, the puller can fit for both outside and
inside hook.
● The claw position fixing can be easily achieved just by turning
the knob.
● The GS-M type has a long claw reaching length and
appropriate forcing screw length allowing efficient operations.
Ideal especially for operations like motor disassembly.
T
L
S

GS type GS-M type

Example H
H1
H2
of use
t T
Gear pullers φD1
(2-claw type) φDT2 T1 φD2
during outside hook (claw shortest
diameter during
inside hook)

Gear pullers
(auto-grip, Size
（mm）
G type)
Pulled object size H2 S T1 T2 Guaranteed N.W.
Type Item No. Forcing
L H H1 Claw reaching T load（kN） （kg）
External dia. D External dia. D1 Max. Forcing screw hex. Claw tip Claw tip screw
during outside hook during inside hook D2 width t length width across flats width thickness dia.
GS90 15〜90 70〜140 91 136 142 1
Gear pullers 100 170 103 35 17 21.5 3 14 45
GS Type

(3-claw type) GS120 20〜120 70〜180 94 176 148 1.2

GS160 25〜160 100〜220 126 220 212 2.6
155 240 160 43 19 26 4.5 18 60
GS200 25〜200 100〜260 128 260 218 2.9
GS90M 15〜90 70〜140 91 136 217 1.6
GS-M Type

Shock speed 175 245 178 35 17 21.5 3 14 45

pullers GS120M 20〜120 70〜180 94 176 223 1.8
GS160M 25〜160 100〜220 126 220 362 4.1
305 390 310 43 19 26 4.5 18 60
GS200M 25〜200 100〜260 128 260 368 4.4

Sliding gear
pullers GS-T・GS-TM
■ SLIDING GEAR PULLER, GS-T Type (Thin Claw Type)
Bearing
pullers,
bearing
Feature
puller sets ● The thin claws show great pulling capacities for objects where you
don’t have enough space to set conventional gear puller claws.
L T
Bearing S
insertion
tool sets

Hydraulic
pullers, H
power
H1
pushers H2

t T

φDT2 φD1
Accessories
T1 φD2
during outside hook (claw shortest
diameter during
GS-T type GS-TM type inside hook)

Size
（mm）
Pulled object size H2 S T1 T2 Guaranteed N.W.
Type Item No. Forcing
L H H1 Claw reaching T load（kN） （kg）
External dia. D External dia. D1 Max. Forcing screw hex. Claw tip Claw tip screw
during outside hook during inside hook D2 width t length width across flats width thickness dia.
GS90T 20〜90 80〜140 91 136 137 1.1
GS-T Type GS-TM Type

100 170 103 35 17 28 2.7 14 20

GS120T 25〜120 80〜180 94 176 143 1.3
GS160T 30〜160 110〜220 131 220 211 2.9
155 240 160 43 19 32 3.5 18 35
GS200T 30〜200 110〜260 133 260 216 3.2
GS90TM 20〜90 80〜140 91 136 212 1.6
175 245 178 35 17 28 2.7 14 20
GS120TM 25〜120 80〜180 94 176 218 1.8
GS160TM 30〜160 110〜220 131 220 361 4.2
305 390 310 43 19 32 3.5 18 35
GS200TM 30〜200 110〜260 133 260 366 4.5

162 ●For all the appendix of the gear pullers, please refer to P.288
 GSJ・GSJ-T・GSB・GSS・GSS-M・GSH-S・GSH-MS
■ SLIDING GEAR PULLER Parts

GSJ90

GEAR PULLERS
■ Claw (1 pc) with pin

fu Full length
ll Item No. Applicable puller
le （mm）
ng
th
GSJ90 GS90・120・90M・120M 103
GSJ160 GS160・200・160M・200M 155

GSJ-T

Gear pullers
(2-claw type)

■ Thin claw (1 pc) with pin

Gear pullers
fu Full length (auto-grip,
ll Item No. Applicable puller
le （mm） G type)
ng
th
GSJ90T GS90T・120T・90TM・120TM 97.7
GSJ160T GS160T・200T・160TM・200TM 152.5
Gear pullers
(3-claw type)

Shock speed
pullers
■ Body

Item No. Applicable puller

GSB90 GS90・90M・90T・90TM Sliding gear

pullers
GSB GSB120 GS120・120M・120T・120TM
GSB160 GS160・160M・160T・160TM
GSB200 GS200・200M・200T・200TM
Bearing
pullers,
bearing
puller sets

Bearing
insertion
tool sets

■ Forcing screw (with adaptor)

GSS Full length Hydraulic

Item No. Applicable puller pullers,
full length （mm）
power
GSS90 GS90・120・90T・120T 170 pushers

GSS160 GS160・200・160T・200T 240

GSS-M GSS90M GS90M・120M・90TM・120TM 245
full length GSS160M GS160M・200M・160TM・200TM 390 Accessories

■ Hook set (with knob, bolt, washer)

GSH-S
full length Full length
Item No. Applicable puller
（mm）
GSH90S GS90・120・90T・120T 55
GSH160S GS160・200・160T・200T 71
GSH-MS GSH90MS GS90M・120M・90TM・120TM 130
full length
GSH160MS GS160M・200M・160TM・200TM 221

●For all the appendix of the gear pullers, please refer to P.288 163
 ABW200
■ SLIDING GEAR PULLER, Super Wide Type
S Features Example of use
cap bolt ● Ideal for removing car crank
pulleys.
GEAR PULLERS

● The sliding claws can be fixed

to the appropriate position
H T t with the cap bolts.
L
● H indicates the claw reaching
D1 φD T1
length when the forcing screw
is lifted to the highest point.

Size
（mm）
D t D1 H L T T1 S Guaranteed N.W.
Item No. Forcing load
（kN） （kg）
Pulled object Pulled object Adaptor Claw reaching Claw tip Claw tip Claw tip Forcing screw hex. screw dia.
diameter max. thickness external dia. length length thickness width width across flats
ABW200 50〜200 50 16 50 18 4 28 17 14 30 1.5

ABWSR200・ABWJ200
Gear pullers
■ SLIDING GEAR PULLER, Super Wide Type Parts
(2-claw type)

Gear pullers
(auto-grip,
G type)
full ■ Forcing screw, body
length (with adaptor) ful ■ Claw (1 pc)
l
len
Full length gth Full length
Item No. Item No.
Gear pullers （mm） （mm）
(3-claw type)
ABWSR200 138 ABWJ200 98

Shock speed
pullers ABT90・ABT90L
■ SLIDING GEAR PULLER, Super Thin Claw Type
S
Sliding gear Features Example of use
pullers
cap bolt
● Ideal for removing pulleys
and gears with little space for
Bearing
claws.
pullers, ● The sliding claws can be fixed
bearing
puller sets H to the appropriate position
with the cap bolts.
t φD1
● ABT90L is long claw type.
Bearing L
insertion
T φD T1 ● H indicates the claw reaching
tool sets ABT90 length when the forcing screw
is lifted to the highest point.
Hydraulic Size
（mm）
pullers,
D t D1 H L T T1 S Guaranteed N.W.
power Item No. Forcing
pushers load
（kN） （kg）
Pulled object Pulled object Adaptor Claw reaching Claw tip Claw tip Claw tip Forcing screw hex. screw dia.
diameter max. thickness external dia. length length thickness width width across flats
ABT90 40〜90 50 16 70 5 2 22 17 14 25 0.6
ABT90L 40〜90 50 16 100 5 2 22 17 14 25 0.8

ABTSR90(L)・ABTJ90(L)
Accessories

■ SLIDING GEAR PULLER, Super Thin Claw Type Parts

■ Forcing screw, body

full (with adaptor) ■ Claw (1 pc)
length ful
l
Full length len Full length
Item No. g Item No.
（mm） th （mm）

ABTSR90
ABTSR90 138 ABTJ90
ABTJ90 112.5
ABTSR90L 168 ABTJ90L 142.5

164 ●For all the appendix of the gear pullers, please refer to P.288
 AB-N
■ ARMATURE BEARING PULLER
Features
● Ideal for small diameter bearings removing operations
in products like electric tools, home appliances or

GEAR PULLERS
bicycles.
● H indicates the claw reaching length when the forcing
screw is lifted to the highest point.

AB0N AB1N・2N・3N

Example
of use
H H

D1 D1 Gear pullers
t t (2-claw type)
T T
D D
（AB0N） （AB1N·2N·3N）
Gear pullers
(auto-grip,
Size
（mm） G type)

D t D1 H Guaranteed N.W.
Item No. Forcing
T load
（kN） （kg）
Pulled object max. screw dia.
Pulled object dia. Forcing screw end dia. Claw reaching length
thickness
Gear pullers
AB0N 10〜25 8 4 40 1 8 6 0.2
(3-claw type)
AB1N 19〜35 8 6 50 1 8 10 0.3
AB2N 24〜55 12 8 100 1.2 10 13 0.7
AB3N 35〜80 15 12 160 1.5 16 18 1.9

ABJ-N・ABN-N・ASR-N
Shock speed
pullers

■ ARMATURE BEARING PULLER Parts Sliding gear

pullers

Bearing
■ Claw (left / right pair) pullers,
bearing
Item No. Full length
（mm） puller sets

ABJ0N 62
ABJ1N 72
Bearing
ABJ2N 131 insertion
ABJ1N ABJ3N 210 tool sets

ength ＊ The claw pair comes as 1 claw with screw holes and 1 claw with bolt holes.
full l
Hydraulic
pullers,
power
pushers

■ Opening stopper bolt (1 pc)

Item No. Full length

（mm）
Accessories
ABN0N 40
ngth
ABN1N full le ABN1N 51
ABN2N 78
ABN3N 108

■ Forcing screw, body

Item No. Full length

（mm）
ASR2N
ASR0N 95
ASR1N 105
ngth
full le ASR2N 165
ASR3N 245

●For all the appendix of the gear pullers, please refer to P.288 165
 G1000・G2000・G4000
■ BEARING GRIP PULLER SET
(Heavy Duty Type for Professional Use)
Features
● Ideal for removing bearings and gears with no space.
GEAR PULLERS

● Ideal puller set for removing pulleys with large diameter.

● Steel case as standard acc.
Accessories Example of use
● GP grease (10g)
● Hook bolt for GL

G2000

Gear puller Bearing Ratchet wrench Breaking Set N.W.

Item No.
GL type separator with grip load (kN) (kg)
Gear pullers
(2-claw type) G1000 GL4 BS1S RNG14×17 40 4
G2000 GL6 BS2S RNG19×22 60 8
G4000 GL8 BS4 RNG22×27 80 14

P1000・P2000・P4000
Gear pullers
(auto-grip,
G type)

■ BEARING PUSH PULLER SET

Gear pullers
(3-claw type) (Heavy Duty Type for Professional Use)
Feature
Shock speed
● Ideal puller set for removing and inserting bearings, gears and
pullers pulleys in deep places.
● Steel case as standard acc (special strengthened cardboard case
for P4000).
Sliding gear Accessories Example of use
pullers
● GP grease (10g)

Bearing
pullers,
bearing
puller sets
P1000

Bearing
insertion
tool sets
1）Removing a bearing from a shaft 2）Inserting a bearing onto a shaft 3）Removing a shaft from a machine main body 4）About the forcing
forcing screw screw adaptor
forcing screw hex. nut
forcing screw
Hydraulic
pullers, forcing screw
power forcing screw hex. nut adaptor
forcing screw
pushers stud bolt stud bolt
connection
coupling fitting
forcing screw
nut inserted adaptor adjust to
pulled ring bearing the shaft
Accessories object adaptor screw diameter
bearing coupling nut
bearing bearing
separator shaft separator
separator

1) Set as shown in the drawing, fix the forcing screw hex. nut with a spanner and tighten the square part of the forcing screw. When the bearing
is at the bottom of the shaft, add a stud bolt by connecting with a coupling nut, as shown in the drawing. For P1000, the hole diameter of the
separator screw and the external diameter of the stud bolt screw are different. Before use, screw the ring adaptor into the stud bolt.
2) Set as shown in the drawing and follow the operation detailed in 1).
3) Set as shown in the drawing, fix the square part of the forcing screw with a spanner and tighten the forcing screw hex. nut.
4) If the diameters of the forcing screw adaptor and the shaft screw don’ t match, make a connection fitting separately.

Forcing screw Bearing Ring Coupling Ratchet wrench Guaranteed Set N.W.
Item No. Push puller Stud bolt
adaptor separator adaptor nut with grip load
（kN） （kg）
P1000 PP2 PPN2 BS1S PPA1
（2pcs） PCU2
（2pcs） PSN2125
（2pcs） RNG14×17 60 7
P2000 PP2 PPN2 BS2S ― PCU2
（2pcs） PSN2125
（2pcs） RNG19×22 100 11
PSN4115
（2pcs）
P4000 PP4 PPN4 BS4 ― PCU4
（4pcs） RG27 200 22
PSN4420
（2pcs）

166 ●For all the appendix of the gear pullers, please refer to P.288
 BS・BS-S
■ BEARING SEPARATOR
(Heavy Duty Type for Professional Use)
Features
● Ideal for removing bearings and gears with no spaces

GEAR PULLERS
BS2S BS1 for G or GL type claws.
● Ideal for removing pulleys with large perimeter.

S Example
S of use
S1 H
D1

D
L
BS1S・2S BS1・2・4

Size（mm） Guaranteed Applicable puller

N.W.
Item No. D・applicable L D1 S1 S load Gear puller Push
H （kg）
diameter Bolt length Body screw dia. Forcing screw hex width across flats Nut hex width across flats （kN） （GL・GLL type） puller
BS1 6〜60 60 120 M10 ― 14 60 0.5 GL・GLL4 PP2
BS1S 6〜60 60 160 M10 17 14 60 0.9 GL・GLL4 PP2 Gear pullers
(2-claw type)
BS2 9〜115 110 205 M12 ― 22 100 2.3 GL・GLL6 PP2
BS2S 9〜115 110 255 M12 19 22 100 3.5 GL・GLL6 PP2
BS4 25〜230 155 330 M16 ― 27 200 5 GL・GLL8・10 PP4
Gear pullers

BSB・BSR・BHN・BSU・BSN・BSN-S
(auto-grip,
G type)
Parts Hook bolt inserting hole (BHN) Hex nut (BSU)

■ BEARING SEPARATOR Parts Gear pullers

(3-claw type)

Bolt (BSN・BSN-S) Shock speed

pullers

BSR2
Sliding gear
pullers

BSB4

■ Body (1 set) ■ Speeder (Body, forcing screw set) Bearing

pullers,
bearing
Item No. Item No. puller sets
BSB1 BSR1
BSB2 BSR2
Bearing
BSB4 ＊ The tip of this forcing screw includes an adaptor to reduce frictional resistance. insertion
tool sets

Hydraulic
pullers,
th
BHN2 full leng BSU2 power
pushers
■ Hook bolt (1 pc) ■ Hex nut (1 pc)
Size
（mm） Size
（mm）
Item No. Item No.
Screw dia. Hex. width across flats Full length Screw diameter Hex width across flats
Accessories
BHN1 M10 17 42 BSU1 M10×1 14
BHN2 M12 19 48 BSU2 M16×1.5 22
BHN4 M16 24 60 BSU4 M20×1.5 27

BSN4
■ Bolt for BS (1 pc) BSN2S

Size
（mm） ■ Bolt for BS1S・2S (1 pc)
Item No.
Nominal diameter Bolt length Size
（mm）
Item No.
BSN1 M10×1 120 Nominal diameter Bolt length
BSN2 M16×1.5 205 BSN1S M10×1 160
BSN4 M20×1.5 330 BSN2S M16×1.5 255

●For all the appendix of the gear pullers, please refer to P.288 167
 PP
■ PUSH PULLER (Heavy Duty Type for Professional Use)
Feature
● Setting this push puller with a bearing separator allows even more
applications.
GEAR PULLERS

H1

H Size
（mm） Guaranteed
Set N.W.
Item No. H load
L H1 （kg）
Max. （kN）

PP2 PP2 65〜200 223 150 100 2.7

L PP4 90〜330 233 245 200 7

Parts

⑥
PPB・PPS・PPU・PPZ・PCU・PSU・PSZ・PPA・PSN・PPN
② ① ■ BEARING PUSH PULLER SET Parts

⑦ ④
Gear pullers ③
(2-claw type)
⑧
ngth
PPS2 full le
Gear pullers
(auto-grip,
PPB2
G type) ■ Forcing screw (②)
⑤ ■ Body (①) Size
（mm）
Item No. Screw diameter
Item No. Full length
Gear pullers (30°trapezoidal thread)
(3-claw type) ⑨ PPB2 PPS2 TM20×2.5 305
PPB4 PPS4 TM28×3 340

Shock speed
pullers

PPU2
Sliding gear PPZ2
pullers PCU2
■ Hex nut for forcing screw (③)
Size
（mm） ■ Washer for forcing screw (④) ■ Coupling nut (⑤)
Item No. Screw diameter Hex width Size
（mm）
Bearing Item No. Item No.
pullers, (30°trapezoidal thread) across flats Screw dia. Hex width across flats
bearing
puller sets PPU2 TM20×2.5 27 PPZ2 PCU2 M12 19
PPU4 TM28×3 36 PPZ4 PCU4 M16 24

Bearing
insertion
tool sets

Hydraulic PSU2 PPA1

PSZ2
pullers,
power ■ Nut with washer for stud bolt (⑥) ■ Washer for stud bolt (⑦) ■ Ring adaptor
pushers
Size
（mm） Size（mm）
Item No. Item No. Applicable
Screw dia. Hex width across flats Item No. Hex width
model Screw dia.
PSU2 M12 19 PSZ2 across flats
Accessories
PSU4 M16 24 PSZ4 PPA1 for BS1・1S M12×M10 19
＊ Required only when using a bearing separator.

PSN2150

■ Stud bolt (1 pc) (⑧)

PPN2
Screw diameter × length
Item No. ■ Adaptor for forcing screw (⑨)
(mm)
PSN2125 M12×125 Size
（mm）
PSN2150 M12×150 Item No. Forcing screw side dia. Connection side dia.
PSN4115 M16×115 (30°trapezoidal thread screw) (metric coarse thread screw)
PSN4245 M16×245 PPN2 TM20×2.5 M16
PSN4420 M16×420 PPN4 TM28×3 M20

168 ●For all the appendix of the gear pullers, please refer to P.288
 BP-S・BP30FS
■ BEARING PULLER SET
Features
L ● Dedicated tool set for
L1 T removing bearings from

GEAR PULLERS
inner rings.
● Chuck the internal claw

claw reaching length

on the bearing internal

internal claw
H diameter, set on the stand
BP15S BP30S
and then the bearing
can be removed just by
turning the nut.
T1

Tighten the adjustment screw

1) Insert the internal claw
matching with the bearing
internal diameter at the
bottom of the bearing,
tighten the adjustment
Set to Gear pullers
screw and set so that (2-claw type)
hook
at the bottom the internal claw is firmly
BP30FS
(Fig.1) hooked to the bottom of
the bearing. (Fig.1) Gear pullers
Tighten the nut
Example Fix and to remove
2) Connect and fix the lower (auto-grip,
G type)
of use tighten
Connect
part of the standing puller
with a
spanner
the screw forcing screw to the
part
adjustment screw. (Fig.2)
3) Fix the hex. part of the Gear pullers
(3-claw type)
forcing screw lower part
with a spanner, tighten
the nut and remove the
(Fig.2) bearing. (Fig.2) Shock speed
pullers

Size
（mm） Set N.W.
Item No.
Applicable bearing (internal diameter) L L1 T T1 H Claw reaching length （kg）
BP15S φ8、
φ10、
φ12、
φ15 100 42〜88 20 10 120 Max.150 1.5 Sliding gear
BP30S φ17、
φ20、
φ25、
φ30 110 47〜98 25 10 130 Max.150 2 pullers

BP30FS φ8、
φ10、
φ12、
φ15、
φ17、
φ20、
φ25、
φ30 Set of the 2 items above 3.8

BPS・BJ
Bearing
pullers,
bearing
puller sets

■ BEARING PULLER SET Parts

Bearing
insertion
tool sets

■ Stand set
Hydraulic
pullers,
Item No. Applicable internal claw power
pushers
BPS15 BJ 8〜15
BPS15 BPS30 BPS30 BJ17〜30

Accessories
M10×1.5 M12×1.75

BJ8 BJ10 BJ17 BJ20

BJ12 BJ15 BJ25 BJ30

■ Internal claw

Applicable bearing Applicable bearing

Item No. Applicable stand Item No. Applicable stand
(internal diameter)
（mm） (internal diameter)
（mm）
BJ8 BPS15 φ8 BJ17 BPS30 φ17
BJ10 BPS15 φ10 BJ20 BPS30 φ20
BJ12 BPS15 φ12 BJ25 BPS30 φ25
BJ15 BPS15 φ15 BJ30 BPS30 φ30

●For all the appendix of the gear pullers, please refer to P.288 169
 BH32
■ SLIDE HAMMER BEARING PULLER SET
(Heavy Duty Type for Professional Use)
Features
● Dedicated tool set for removing bearings from inner rings.
GEAR PULLERS

● Steel case as standard acc.

Slide
Example
A) Insert the internal claw onto the bearing. of use
A) B) B) Fix the internal claw cap and tighten the
Adjustment adjustment screw.
screw Set item Set N.W.
＊ The adjustment screw gets pulled out, the Item name Item No. Q’
ty
Internal
No. （kg）
internal claw tips open, hook the bearing
claw cap Slide hammer BPH6 1 set
bottom part and hold the bearing, as BH32 4.5
shown on Fig. B). Internal claw BPJ0〜4 5

BP60
■ BEARING PULLER SET
Gear pullers
(Heavy Duty Type for Professional Use)
(2-claw type)
Features
● Dedicated tool set for removing bearings from inner
Gear pullers and outer rings.
(auto-grip,
G type)
● Steel case as standard acc.

Set item Set N.W.

Item name Item No. Q’
ty
No. （kg）

Gear pullers Slide hammer BPH6 1 set

(3-claw type)
Internal claw BPJ0〜7 8
Standing puller BPS6 1
BP60 14
Opening stopper BPU6 1
Single size offset wrench BPM6 1
Shock speed
pullers Hex key wrench BPX4 1

■ Standing puller S
BPS・BPJ・BPH・BPSJ・BPU・BPM
Sliding gear
pullers
Example ■ BEARING PULLER SET Parts
of use
Features
Bearing
pullers,
● Dedicated for removing outer ring by setting with the
bearing
H opening stopper (BPU6) for stable operation.
puller sets T t
D
● H indicates the claw reaching length when the forcing
screw is lifted to the highest point.
Bearing ■ Standing puller (outer ring removing ability table)
insertion
tool sets Size
（mm）
D t H T S Breaking load
Item No.
Pulled object （kN）
Claw reaching Forcing screw hex.
Hydraulic
Dia. (external diameter) Width Claw tip thickness
pullers, length width across flats
power BPS6 45〜150 Max. 55 Max. 150 6 22 60
pushers

■ Internal claw BPJ5

Accessories
M15×1.5
(inner ring removing ability table)
Pulled object（mm） Applicable Pulled object（mm） Applicable full length
Item No. Item No.
Dia. (internal dia.) Width bearing No. Dia. (internal dia.) Width bearing No.
■ Slide hammer
BPJ0 10.0〜13.0 12 00・01 BPJ4 25.0〜32.0 20 05・06
BPJ1 12.0〜15.0 13 01・02 BPJ5 34.5〜41.5 23 07・08 Full length
Item No.
BPJ2 15.0〜20.0 15 02・03・04 BPJ6 44.0〜51.0 27 09・10 （mm）
BPJ3 20.0〜25.0 17 04・05 BPJ7 55.0〜60.0 31 11・12 BPH6 511

full length
■ Standing puller claw (1 pc) ■ Opening stopper ■ Offset wrench

Item No. Full length

（mm） Item No. Item No.
BPSJ 222.8 BPU6 BPM6

170 ●For all the appendix of the gear pullers, please refer to P.288
 BI75S
■ BEARING INSERTION TOOL SET
Features
● Tool set for inserting bearings onto housings
(bearing cases).

GEAR PULLERS
● Case external dimensions : 520 × 265 × 90mm

170.5
M12 5.5 15

bearing internal dia.

bearing external dia.
impact shaft
inner outer
ring disc ring disc

■ Applicable bearing
Set item Set N.W.
Item name Q’
ty
No. （kg） φ17、
φ20、
φ22、
φ25、φ28、
φ30、
φ32、
Bearing internal dia.
φ35、
φ40、
φ45、
φ50 Gear pullers
Impact shaft 1 (2-claw type)
Outer ring disc 19 sizes φ26、
φ30、
φ32、
φ35、
φ37、φ40、
φ42、
BI75S 6.5
Inner ring disc 11sizes Bearing external dia. φ44、
φ47、
φ50、
φ52、
φ55、φ56、
φ58、
φ62、
φ65、
φ68、
φ72、
φ75
Dedicated aluminum case 1
Gear pullers
(auto-grip,
G type)
■ Operation instructions

Gear pullers
(3-claw type)
1) Assembly
Select the outer ring disc and the inner ring disc matching with the bearing internal and external
diameters (the internal and external diameter size of the applicable bearing is displayed on each inserting
disc.) . Set the outer ring disc to the impact shaft and then screw in and fix the inner ring disc. (Fig.1) Shock speed
pullers

inner ring disc (B)

outer ring disc (A)
Sliding gear
impact shaft pullers

Bearing
pullers,
(Fig.1) bearing
puller sets

Bearing
2) Bearing insertion insertion
tool sets
Insert the inner ring disc onto the bearing inner ring (Fig.2) and hit the impact shaft with a hammer to
insert the bearing onto the housing (Fig.3).
Hydraulic
pullers,
power
pushers

Accessories

(Fig.2) (Fig.3)
During the operation, check that the bearing is inserted straightly.

●For all the appendix of the gear pullers, please refer to P.288 171
 BI50110S
■ BEARING INSERTION TOOL SET
Features
● Tool set for inserting bearings onto shafts or housings
(bearing cases).
GEAR PULLERS

● Case external dimensions : 445×380×120mm

Set item Set N.W.

Item name Q’
ty
No. （kg）
Main body (impact head already set) 3 sizes
Inserting disc 33 sizes
BI50110S 15
Hammer 1
Dedicated aluminum case 1

L
L1(depth)
L2 Size（mm）
Inserting disc Main
Applicable bearing body
D2 L L1 L2 name
Gear pullers φD φD1 φD2 External dia.D Internal dia.D1 Name Type
(2-claw type)
35 25 245 220 20 1735 B A
40 17 25 245 220 10 1740 B A
Inserting disc (type A)
47 25 245 220 10 1747 B A
Gear pullers L2 42 37.5 245 220 10 2042 A B
(auto-grip,
G type) 47 20 37.5 245 220 10 2047 A B
52 37.5 245 220 10 2052 A B
φD φD1 47 37.5 245 220 20 2547 B B
52 25 37.5 245 220 10 2552 B B
Gear pullers
(3-claw type) 62 37.5 250 225 15 2562 B B
Inserting disc (type B) 55 37.5 245 220 10 3055 B B
62 30 37.5 250 225 15 3062 B B
■ Dimensions and applicable bearings
72 37.5 250 225 15 3072 B B
Shock speed Size（mm） Main 62 60 250 225 15 3562 A C
pullers Inserting disc
Applicable bearing body 72 35 60 245 220 15 3572 B C
D2 L L1 L2 name
External dia.D Internal dia.D1 Name Type 80 60 245 220 15 3580 B C
26 25 245 220 10 1026 A A 68 60 250 225 15 4068 A C
Sliding gear 30 10 25 245 220 10 1030 A A 80 40 60 245 220 15 4080 B C
pullers
35 25 245 220 10 1035 A A 90 60 245 220 15 4090 B C
28 25 245 220 10 1228 A A 75 60 245 220 15 4575 B C
32 12 25 245 220 10 1232 A A 85 45 60 245 220 15 4585 B C
Bearing
pullers, 37 25 245 220 10 1237 A A 100 60 245 220 15 45100 B C
bearing 32 25 245 220 20 1532 B A 80 60 245 220 15 5080 B C
puller sets
35 15 25 245 220 20 1535 B A 90 50 60 245 220 15 5090 B C
42 25 245 220 10 1542 B A 110 60 245 220 15 50110 B C
Bearing
insertion
tool sets ■ Operation instructions

1) Assembly 2) Bearing insertion

Hydraulic ●Select the inserting discs matching with the bearing ●When inserting to the shaft end：
pullers,
power internal and external diameters (the internal and Set the bearing and the inserting disc to the shaft
pushers external diameter size of the applicable bearing is and insert with the hammer included.
displayed on each inserting disc.) . bearing inserting disc
●Insert the inserting disc until the bottom of the main
Accessories body and fix it (Insert the inserting disc straightly into
bearing inserting disc
the main body to avoid crooked insertion. If the disc
is hard to insert, apply a little oil in the disc O ring.). shaft
inserting disc press fit part
main body Make sure there is no misalignment between
check line
the shaft, the bearing and the inserting disc.
shaft
●When inserting
press fit part to there
Make sure the isshaft bottom :between
no misalignment
After passingthethe bearing
shaft, ontoand
the bearing thethe
shaft, pass
inserting the
disc.
shaft inserting
onto the inserting
bearing disc
disc hole and insert with
(Type A) (Type B) the hammer included.
bearing inserting disc

shaft
press fit part Make sure there is no misalignment between
Insert until there is the shaft, the bearing and the inserting disc.
Insert until the check
no more space between shaft
line enters the disc hole.
the disc and the main body. press fit part Make sure there is no misalignment between
the shaft, the bearing and the inserting disc.

172 ●For all the appendix of the gear pullers, please refer to P.288
 GLP
S
■ 2-CLAW HYDRAULIC PULLER SET
Feature ● Easy to remove rusted or burned gears
and pulleys with hydraulic power.
cylinder
adaptor Accessories ● Ratchet wrench with grip (RG), each 1

GEAR PULLERS
pc
H
T ■ Set hydraulic pump, hose, cylinder item No.

D Set item No. Hydraulic pump, hose, cylinder

GLP10・12 HP500AN・HH2N・GPC1012
GLP15・18 HP500AN・HH2N・GPC1518
GLP10 GLP24 HP500AN・HH2N・GPC24

Size
（mm）
H S
D T Max. load Set N.W.
Item No. Claw reaching length Forcing screw Forcing screw Cylinder （kN） （kg）
Pulled object Pulled object width Cylinder adaptor hex. width external dia. stroke
diameter when D is at max. L in use S in use across flats
GLP10 100〜250 125 125 150 30 28 50 100 16
GLP12 120〜300 170 175 200 32 32 50 100 19
GLP15 150〜375 185 180 210 41 38 50 140 27 Gear pullers
(2-claw type)
GLP18 180〜450 200 220 250 46 44 50 140 30
GLP24 280〜600 175 300 ー 46 44 50 230 63

Gear pullers
(auto-grip,

GTP
G type)

S ■ 3-CLAW HYDRAULIC PULLER SET Gear pullers

(3-claw type)

Features ● Easy to remove rusted or burned gears

and pulleys with hydraulic power.
● The setting is more stable with 3 claws.
cylinder Shock speed
adaptor Accessories ● Ratchet wrench with grip (RG), each 1 pullers

pc
H
T
■ Set hydraulic pump, hose, cylinder item No.
D Sliding gear
Set item No. Hydraulic pump, hose, cylinder pullers

GTP10・12 HP500AN・HH2N・GPC1012
GTP15・18 HP500AN・HH2N・GPC1518
GTP12 Bearing
pullers,
bearing
Size
（mm）
puller sets
H S
D T Max. load Set N.W.
Item No. Claw reaching length Forcing screw Forcing screw Cylinder （kN） （kg）
Pulled object Pulled object width Cylinder adaptor hex. width external dia. stroke Bearing
insertion
diameter when D is at max. L in use S in use across flats tool sets

GTP10 100〜250 125 125 150 32 32 50 100 20

GTP12 120〜300 170 175 200 32 32 50 100 24
Hydraulic
GTP15 150〜375 185 180 210 41 38 50 140 35 pullers,
GTP18 180〜450 200 220 250 46 44 50 140 42 power
pushers

D SW-N Accessories

Example of use ■ POWER PUSHER

H
Features ● When rusted or burned gears and pulleys are hard
to get removed, use the power pusher as shown
in the example of use. The hydraulic force of the
L power pusher enables easy removing operation.
SW8N ● Can be widely used as a compact high power jack.

Size
（mm） Applicable puller
Max. load N.W.
Item No. Shock speed
Stroke L H D Gear puller （kN） （kg）
puller
SW8N 172〜223 88〜103 22 8〜24 8・12 80 1.6
15
SW16N 210〜284 98〜113 25 18・24 12 160 2.7

●For all the appendix of the gear pullers, please refer to P.288 173
 HP500AN
■ HAND-OPERATED HYDRAULIC PUMP, Aluminum
Alloy Body (for Single Action Type Cylinder)
The pump head is made of robust duralumin
GEAR PULLERS

Features
● This aluminum pump net weight is about half of a steel pump.
● Output type pump with high / low pressure 2 steps automatic
switching.

Item No. Output pressure

（MPa） Effective oil quantity
（cm3） Applicable gear puller size N.W.
（kg）
HP500AN 1.4〜70 500 10・12・15・18・24 4.5

GPC
■ HYDRAULIC PULLER CYLINDER
D1 Feature
setting hole
● For the gear puller, use with long claws (GLJ).
Gear pullers
(2-claw type)
L

Gear pullers
(auto-grip, D
G type) GPC

Size
（mm） Applicable gear Max. load Set N.W.
Item No. Included adaptor
Stroke L D D1 puller size （kN） （kg）
Gear pullers
(3-claw type)
GPC1012 50 132 57 26/32 10・12 GLA12S、12L 100 2.9
GPC1518 50 178 70 32/40 15・18 GLA18S、18L 140 6
GPC24 50 199 86 40 24 GLA24 230 9.7

Shock speed
pullers
HH2N
■ HYDRAULIC HOSE
Sliding gear
pullers Feature
● Can be used with all hand-operated pumps in general.
Accessories
Bearing
pullers, ● Coupling HCFN (female) for cylinder side setting
bearing
puller sets

Size
（mm） Pressure at Included coupling Connection N.W.
Item No. Hose material
Internal dia. External dia. Full length max. use (male) screw dia. (R) （kg）
Bearing （MPa）
insertion
tool sets HH2N 6.35 15 2,000 70 Oilproof synthetic rubber HCMN 3/8 1.25

Hydraulic
pullers,
power GLA-L・GLA-S・GLA24 GP50
■ CYLINDER ADAPTOR ■ GP GREASE
pushers

Accessories
screw L

D
GLA12L

Feature ● Exclusively for GPC use.

Size
（mm） Applicable N.W.
Item No. Screw
L D cylinder （g）
GLA12S 30 Metric 110 Feature ● Special lubrication grease with outstanding
21 GPC1012
GLA12L 55 M24×2 230 protection properties against friction and
GLA18S 35
32
Unified
GPC1518
300 high temperature of gears and screws.
GLA18L 65 1-8UNC 500
Item No. Quantity
（g）
Unified
GLA24 100 40 GPC24 1,400
11/2-16UNF GP50 50

174 ●For all the appendix of the gear pullers, please refer to P.288