ZXM8-TPLDD132 Series

12BB HALF-CELL Bifacial Double Glass Monocrystalline

PERC PV Module

645-670W 21.57% 0.45%

POWER RANGE MAXIMUM EFFICIENCY YEARLY DEGRADATION

12 YEARS PRODUCT WARRANTY 30 YEARS OUTPUT GUARANTEE

IEC 61215/IEC 61730/IEC 61701/IEC 62716/UL6 1730

ISO 14001: Environmental Management System

ISO 9001: Quality Management System

ISO45001: Occupational Health and Safety Management System

*As there are different certification requirements in different markets.please contact your local znshine sales representative for the specific certificates
applicable to the products in the region in which the products are to be used.

*Please check the valid version of Limited Product Warranty which is

officially released by ZNSHINE PV-TECH Co.,Ltd.

KEY FEATURES

Excellent Cells Efficiency Better Weak Illumination Response

12BB
MBB technology reduce the distance between busbars and More power output in weak light condition, such as haze,
finger grid line which is benefit to power increase. cloudy, and early morning.

Anti PID Adapt To Harsh Outdoor Environment

Ensured PID resistance through the quality control of cell Resistant to harsh environments such as salt, ammonia,
manufacturing process and raw materials. sand, high temperature and high humidity environment.

TIER 1 Excellent Quality Managerment System

Global,Tier 1 bankable brand,with independently certified Warranted reliability and stringent quality assurances well
advanced automated manufacturing. beyond certified requirements.

Bifacial Technology
Up to 25% additional power gain from back side depending
on albedo.

Founded in 1988, ZNShine solar is a world’s leading high-tech PV module manufacturer.With the advanced production lines, the company boasts module capacity
of 10 GW. Bloomberg has listed ZNShine as a global Tier 1 PV module maker. Today Znshine has distributed its sales to more than 60 countries around the globe.
www.znshinesolar.com
 Znshinesolar 12BB HALF-CELL Bifacial
ZXM8-TPLDD132 Series Double Glass Monocrystalline PERC PV Module

DIMENSIONS OF PV MODULE(mm)
I-V CURVES OF PV MODULE(650W)
Barcode 1 25
Cells temp. = 25 °C

20
Drainage holes Incident Irrad. = 1000 W/m²

Current [A]
15 Incident Irrad. = 800 W/m²

Incident Irrad. = 600 W/m²

10
Incident Irrad. = 400 W/m²

5
Incident Irrad. = 200 W/m²

Barcode 2 0
0 10 20 30 40 50
Mounting holes
Voltage [V]
Junction box
Label
P-V CURVES OF PV MODULE(650W)
800
Cells temp. = 25 °C
700 Incident Irrad. = 1000 W/m²
Incident Irrad. = 800 W/m²
Incident Irrad. = 600 W/m²
600 Incident Irrad. = 400 W/m²
Incident Irrad. = 200 W/m²

Power [W]
Grounding 500
Grounding holes identification
400

300

200

100

Front View Back View 0

0 10 20 30 40 50

*Remark: customized frame color and cable length available upon request Voltage [V]

ELECTRICAL CHARACTERISTICS 丨 STC* MECHANICAL DATA

Nominal Power Watt Pmax(W)* 645 650 655 660 665 670 Solar cells Mono PERC

Maximum Power Voltage Vmp(V) 37.50 37.70 37.90 38.10 38.30 38.50 Cells orientation 132（6×22）

Maximum Power Current Imp(A) 17.21 17.25 17.29 17.33 17.37 17.41 Module dimension 2384×1303×35 mm (With Frame)

Open Circuit Voltage Voc(V) 45.00 45.20 45.40 45.60 45.80 46.00 Weight 38.5±1.0 kg

Short Circuit Current Isc(A) 18.22 18.27 18.32 18.37 18.42 18.47 Glass 2.0 mm+2.0mm, High Transmission, AR Coated Heat Strengthened Glass

Module Efficiency (%) 20.76 20.92 21.09 21.25 21.41 21.57 Junction box IP 68，3 diodes
*The data above is for reference only and the actual data is in accordance with the pratical testing
*STC (Standard Test Condition): Irradiance 1000W/m², Module Temperature 25±2℃, AM 1.5 Cables 4 mm² ,350 mm (With Connectors)
*Measuring uncertainity: ±3%, all the electrical characteristics such as Power, Im, Vm and FF are within ±3% tolerance.
Connectors* MC4-compatible

*Please refer to regional datasheet for specified connector

ELECTRICAL CHARACTERISTICS 丨 NMOT* TEMPERATURE RATINGS WORKING CONDITIONS

Maximum Power Pmax(Wp) 484.90 488.60 492.30 496.10 499.80 503.60 NMOT 43℃ ±2℃ Maximum system voltage 1500 V DC

Maximum Power Voltage Vmpp(V) 35.00 35.20 35.40 35.60 35.70 35.90 Temperature coefficient of Pmax -0.34%/℃ Operating temperature -40℃~+85℃

Maximum Power Current Impp(A) 13.84 13.88 13.92 13.95 13.99 14.03 Temperature coefficient of Voc -0.29%/℃ Maximum series fuse 35 A

Open Circuit Voltage Voc(V) 42.30 42.40 42.60 42.80 43.00 43.20 Temperature coefficient of Isc 0.05%/℃ Front Side Maximum Static Loading Up to 5400Pa

Short Circuit Current Isc(A) 14.71 14.75 14.79 14.83 14.87 14.91 Refer.Bifacial Factor 70±5% Rear Side Maximum Static Loading Up to 2400Pa

*NMOT:Irradiance 800W/m²,Ambient Temperature 20℃,AM 1.5,Wind Speed 1m/s *Remark:Do not connect Fuse in Combiner Box with two or more strings in parallel connection

ELECTRICAL CHARACTERISTICS WITH 25% REAR SIDE POWER GAIN * PACKAGING CONFIGURATION *
Front power Pmax/W 645 650 655 660 665 670 Piece/Box 31
Total power Pmax/W 806 813 819 825 831 838 Piece/Container(40’HQ) 558
Vmp/V(Total) 37.60 37.80 38.00 38.20 38.40 38.60 *Customized packaging is available upon request.
*Remark:Electrical data in this catalog do not refer to a single module and they are not part of the offer.
Imp/A(Total) They only serve for comparison among different module types.
21.44 21.49 21.55 21.60 21.65 21.70
*Caution:Please be kindly advised that PV modules should be handled and installed by qualified people who have professional skills
and please carefully read the safety and installation instructions before using our PV modules.
Voc/V(Total) 45.10 45.30 45.50 45.70 45.90 46.10

Isc/A(Total) 22.70 22.77 22.83 22.89 22.96 23.02

*Bifacial Gain: The additional gain from the back side compared to the power of the front side at the standard test condition.
It depends on mounting (structure, height, tilt angle etc.) and albedo of the ground.

Add : 1#, Zhixi Industrial Zone，JintanJiangsu 213251，P.R. China Tel：+86 519 6822 0233 E-mail：[email protected]

Note: Specifications included in this datasheet are subject to change without notice.ZNSHINE reserves the right of final interpretation © ZNSHINE SOLAR 2022丨Version: ZXM8-TPLDD132 2206.E

No special undertaking or warranty for the suitability of special purpose or being installed in extraordinary surroundings is granted unless as otherwise specifically committed by manufacturer in contract document