0% found this document useful (0 votes)

6 views

SLAB DESIGN Excel Only For Checking Thickness

Uploaded by

Prabhu Ram

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

6 views

SLAB DESIGN Excel Only For Checking Thickness

Uploaded by

Prabhu Ram

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as XLS, PDF, TXT or read online on Scribd

You are on page 1/ 68

DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S3

Short span S= 3.70 mts

Long span L= 5.50 mts
Assumed slab thickness t= 0.150 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Four edges discontinuous

Loads
5.50 mts
Self weight of slab w1= 3.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.62 3.70 mts
kN/m^2
Ratio of long span to short span R= 1.5
Design Load with load factor of 1.5 Wu= 15.93 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 8 279 131
Positive moment at midspan 0.089 19.41 1.15 0.34 445.34 10 176 130

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 10 436 122
Positive moment at midspan 0.056 12.21 0.85 0.25 297.23 10 264 120

Minimum effective depth reqd dre= 83.86 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 120 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 180 mm^2

Deflection check

Reinf provided at midspan along short direction 523.60 mm^2 Dia 10 at 150 mm
Stress in reinforcement fs= 204.722 N/mm^2
Percentage of reinforcement provided pt= 0.40277 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.56896

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 117.91 mm
Effective depth provided 130 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

9
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.024 0.026 0.028 0.03 0.032 0.034 0.036 0.038 0.039 0.04 0.041
2 0.028 0.03 0.032 0.034 0.036 0.038 0.039 0.04 0.041 0.043 0.044
3 0.028 0.031 0.033 0.036 0.039 0.042 0.044 0.046 0.047 0.049 0.051
4 0.035 0.038 0.04 0.043 0.045 0.047 0.049 0.051 0.053 0.055 0.056
5 0.035 0.036 0.037 0.039 0.04 0.042 0.043 0.044 0.044 0.045 0.045
6 0.035 0.039 0.043 0.047 0.051 0.054 0.057 0.06 0.063 0.066 0.068
7 0.043 0.046 0.048 0.051 0.053 0.055 0.057 0.059 0.06 0.062 0.064
8 0.043 0.047 0.051 0.055 0.059 0.062 0.065 0.068 0.071 0.074 0.076
9 0.056 0.06 0.064 0.068 0.072 0.076 0.079 0.082 0.085 0.087 0.089

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.056 0.06 0.064 0.068 0.072 0.076 0.079 0.082 0.085 0.087 0.089

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.56896

k d Z X pt As

0 131 3.611 0.753 0 4.795 0

1.1485 130 3.611 0.753 0.3426 4.453 445.3
0 122 3.611 0.753 0 4.795 0
0.8481 120 3.611 0.753 0.2477 4.548 297.2
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.042 0.043 0.044 0.044 0.045 0.046 0.047 0.048 0.048 0.049 0.024
0.045 0.046 0.047 0.047 0.048 0.049 0.05 0.051 0.051 0.052 0.028
0.053 0.054 0.056 0.058 0.059 0.06 0.061 0.063 0.064 0.065 0.028
0.058 0.059 0.06 0.062 0.063 0.064 0.065 0.067 0.068 0.069 0.035
0.046 0.047 0.048 0.048 0.049 0.05 0.05 0.051 0.052 0.052 0.035
0.071 0.073 0.076 0.078 0.08 0.082 0.084 0.085 0.087 0.088 0.035
0.065 0.066 0.067 0.068 0.069 0.07 0.071 0.072 0.072 0.073 0.043
0.078 0.08 0.083 0.085 0.087 0.089 0.091 0.093 0.095 0.096 0.043
0.091 0.094 0.096 0.098 0.1 0.102 0.103 0.104 0.106 0.107 0.056

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.091 0.094 0.096 0.098 0.1 0.102 0.103 0.104 0.106 0.107 0.056
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S4

Short span S= 2.80 mts

Long span L= 2.90 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Two adjacent sides discontinuous

Loads
2.90 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 2.80 mts
kN/m^2
Ratio of long span to short span R= 1.05
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.05 5.88 0.52 0.15 158.51 8 317 106
Positive moment at midspan 0.038 4.47 0.40 0.11 150.00 8 335 106

Long span direction

Negative moment at continuous edge 0.047 5.52 0.58 0.16 161.70 8 311 98
Positive moment at midspan 0.035 4.11 0.43 0.12 150.00 8 335 98

Minimum effective depth reqd dre= 46.15 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 287.23 mm^2 Dia 8 at 175 mm
Stress in reinforcement fs= 125.7 N/mm^2
Percentage of reinforcement provided pt= 0.27097 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Continuous

Basic span to effective depth ratio 21
Minimum effective depth reqd from deflection criteria 66.67 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

4
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.035 0.038 0.04 0.043 0.045 0.047 0.049 0.051 0.053 0.055 0.056

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 21 3.63197
k d Z X pt As

0.5231 106 3.611 0.753 0.1495 4.646 158.5

0.3975 106 3.611 0.753 0.1128 4.683 119.5
0.5752 98 3.611 0.753 0.165 4.63 161.7
0.4284 98 3.611 0.753 0.1217 4.674 119.3
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.058 0.059 0.06 0.062 0.063 0.064 0.065 0.067 0.068 0.069 0.035
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S6

Short span S= 2.90 mts

Long span L= 3.50 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One short edge discontinuous

Loads
3.50 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 2.90 mts
kN/m^2
Ratio of long span to short span R= 1.25
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.05 6.30 0.56 0.16 170.44 8 295 106
Positive moment at midspan 0.038 4.79 0.43 0.12 150.00 8 335 106

Long span direction

Negative moment at continuous edge 0.037 4.67 0.49 0.14 150.00 8 335 98
Positive moment at midspan 0.028 3.53 0.37 0.10 150.00 8 335 98

Minimum effective depth reqd dre= 47.79 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Type of slab for deflection check Continuous

Basic span to effective depth ratio 23
Minimum effective depth reqd from deflection criteria 63.04 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

2
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.028 0.03 0.032 0.034 0.036 0.038 0.039 0.04 0.041 0.043 0.044

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 23 3.63197
k d Z X pt As

0.5611 106 3.611 0.753 0.1608 4.635 170.4

0.4264 106 3.611 0.753 0.1212 4.674 128.4
0.4858 98 3.611 0.753 0.1385 4.657 135.8
0.3676 98 3.611 0.753 0.1041 4.691 102
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.045 0.046 0.047 0.047 0.048 0.049 0.05 0.051 0.051 0.052 0.028
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S5

Short span S= 3.50 mts

Long span L= 3.60 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One short edge continuous

Loads
3.60 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 3.50 mts
kN/m^2
Ratio of long span to short span R= 1.05
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 106
Positive moment at midspan 0.047 8.63 0.77 0.22 236.55 8 212 106

Long span direction

Negative moment at continuous edge 0.057 10.47 1.09 0.32 317.29 8 158 98
Positive moment at midspan 0.043 7.90 0.82 0.24 234.94 8 214 98

Minimum effective depth reqd dre= 61.59 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 335.10 mm^2 Dia 8 at 150 mm
Stress in reinforcement fs= 169.914 N/mm^2
Percentage of reinforcement provided pt= 0.31614 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 87.50 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

8
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.043 0.047 0.051 0.055 0.059 0.062 0.065 0.068 0.071 0.074 0.076

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 2.17607

k d Z X pt As

0 106 3.611 0.753 0 4.795 0

0.7682 106 3.611 0.753 0.2232 4.572 236.6
1.09 98 3.611 0.753 0.3238 4.472 317.3
0.8223 98 3.611 0.753 0.2397 4.556 234.9
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0.057

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.078 0.08 0.083 0.085 0.087 0.089 0.091 0.093 0.095 0.096 0.043
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S1

Short span S= 2.90 mts

Long span L= 4.50 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Two long edges discontinuous

Loads
4.50 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 2.90 mts
kN/m^2
Ratio of long span to short span R= 1.6
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 106
Positive moment at midspan 0.073 9.20 0.82 0.24 253.11 8 199 106

Long span direction

Negative moment at continuous edge 0.045 5.67 0.59 0.17 166.24 8 302 98
Positive moment at midspan 0.035 4.41 0.46 0.13 150.00 8 335 98

Minimum effective depth reqd dre= 57.75 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 335.10 mm^2 Dia 8 at 150 mm
Stress in reinforcement fs= 181.802 N/mm^2
Percentage of reinforcement provided pt= 0.31614 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 72.50 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

6
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.035 0.039 0.043 0.047 0.051 0.054 0.057 0.06 0.063 0.066 0.068

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 2.00874

k d Z X pt As

0 106 3.611 0.753 0 4.795 0

0.8192 106 3.611 0.753 0.2388 4.557 253.1
0.5908 98 3.611 0.753 0.1696 4.626 166.2
0.4595 98 3.611 0.753 0.1308 4.664 128.2
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0.045

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.071 0.073 0.076 0.078 0.08 0.082 0.084 0.085 0.087 0.088 0.035
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S7

Short span S= 3.50 mts

Long span L= 4.10 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Four edges discontinuous

Loads
4.10 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 3.50 mts
kN/m^2
Ratio of long span to short span R= 1.2
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 106
Positive moment at midspan 0.072 13.22 1.20 0.36 377.04 10 208 105

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 98
Positive moment at midspan 0.056 10.28 1.14 0.34 322.71 10 243 95

Minimum effective depth reqd dre= 69.22 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 95 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 628.32 mm^2 Dia 10 at 125 mm
Stress in reinforcement fs= 144.439 N/mm^2
Percentage of reinforcement provided pt= 0.5984 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.81582

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 96.37 mm
Effective depth provided 105 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.056 0.06 0.064 0.068 0.072 0.076 0.079 0.082 0.085 0.087 0.089

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.81582

k d Z X pt As

0 106 3.611 0.753 0 4.795 0

1.1994 105 3.611 0.753 0.3591 4.436 377
0 98 3.611 0.753 0 4.795 0
1.1396 95 3.611 0.753 0.3397 4.456 322.7
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.091 0.094 0.096 0.098 0.1 0.102 0.103 0.104 0.106 0.107 0.056
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S2

Short span S= 4.10 mts

Long span L= 5.60 mts
Assumed slab thickness t= 0.175 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One short edge continuous

Loads
5.60 mts
Self weight of slab w1= 4.38 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 6.37 kN/m^2 14.25 4.10 mts
kN/m^2
Ratio of long span to short span R= 1.4
Design Load with load factor of 1.5 Wu= 21.37 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 210.00 10 374 155
Positive moment at midspan 0.071 25.50 1.06 0.31 487.70 10 161 155

Long span direction

Negative moment at continuous edge 0.057 20.47 0.97 0.29 415.96 10 189 145
Positive moment at midspan 0.043 15.45 0.73 0.21 308.73 10 254 145

Minimum effective depth reqd dre= 96.12 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 145 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 210 mm^2

Deflection check

Reinf provided at midspan along short direction 523.60 mm^2 Dia 10 at 150 mm
Stress in reinforcement fs= 224.198 N/mm^2
Percentage of reinforcement provided pt= 0.33781 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.53295

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 133.73 mm
Effective depth provided 155 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.043 0.047 0.051 0.055 0.059 0.062 0.065 0.068 0.071 0.074 0.076

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.53295

k d Z X pt As

0 155 3.611 0.753 0 4.795 0

1.0615 155 3.611 0.753 0.3146 4.481 487.7
0.9738 145 3.611 0.753 0.2869 4.508 416
0.7346 145 3.611 0.753 0.2129 4.582 308.7
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0.057

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.078 0.08 0.083 0.085 0.087 0.089 0.091 0.093 0.095 0.096 0.043
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S8

Short span S= 1.90 mts

Long span L= 2.80 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One long edge discontinuous

Loads
2.80 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 1.90 mts
kN/m^2
Ratio of long span to short span R= 1.5
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.067 3.63 0.32 0.09 150.00 8 335 106
Positive moment at midspan 0.051 2.76 0.25 0.07 150.00 8 335 106

Long span direction

Negative moment at continuous edge 0.037 2.00 0.21 0.06 150.00 8 335 98
Positive moment at midspan 0.028 1.52 0.16 0.04 150.00 8 335 98

Minimum effective depth reqd dre= 36.25 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 335.10 mm^2 Dia 8 at 150 mm
Stress in reinforcement fs= 107.743 N/mm^2
Percentage of reinforcement provided pt= 0.31614 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Continuous

Basic span to effective depth ratio 21
Minimum effective depth reqd from deflection criteria 45.24 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

3
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.028 0.031 0.033 0.036 0.039 0.042 0.044 0.046 0.047 0.049 0.051

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 21 3.85575
k d Z X pt As

0.3227 106 3.611 0.753 0.0911 4.704 96.59

0.2457 106 3.611 0.753 0.069 4.726 73.18
0.2085 98 3.611 0.753 0.0585 4.737 57.3
0.1578 98 3.611 0.753 0.0441 4.751 43.23
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.053 0.054 0.056 0.058 0.059 0.06 0.061 0.063 0.064 0.065 0.028
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S9

Short span S= 4.10 mts

Long span L= 6.50 mts
Assumed slab thickness t= 0.150 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One long edge continuous

Loads
6.50 mts
Self weight of slab w1= 3.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.62 4.10 mts
kN/m^2
Ratio of long span to short span R= 1.6
Design Load with load factor of 1.5 Wu= 15.93 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.087 23.30 1.38 0.42 543.79 10 144 130
Positive moment at midspan 0.066 17.67 1.05 0.31 402.54 10 195 130

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 10 436 120
Positive moment at midspan 0.043 11.51 0.80 0.23 279.33 10 281 120

Minimum effective depth reqd dre= 91.87 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 120 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 180 mm^2

Deflection check

Reinf provided at midspan along short direction 628.32 mm^2 Dia 10 at 125 mm
Stress in reinforcement fs= 154.207 N/mm^2
Percentage of reinforcement provided pt= 0.48332 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.90769

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 107.46 mm
Effective depth provided 130 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

7
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.043 0.046 0.048 0.051 0.053 0.055 0.057 0.059 0.06 0.062 0.064

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.90769

k d Z X pt As

1.3785 130 3.611 0.753 0.4183 4.377 543.8

1.0458 130 3.611 0.753 0.3096 4.486 402.5
0 120 3.611 0.753 0 4.795 0
0.7996 120 3.611 0.753 0.2328 4.563 279.3
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.065 0.066 0.067 0.068 0.069 0.07 0.071 0.072 0.072 0.073 0.043
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S10

Short span S= 2.60 mts

Long span L= 2.80 mts
Assumed slab thickness t= 0.125 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Four edges discontinuous

Loads
2.80 mts
Self weight of slab w1= 3.13 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.00 2.60 mts
kN/m^2
Ratio of long span to short span R= 1.1
Design Load with load factor of 1.5 Wu= 14.99 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 106
Positive moment at midspan 0.064 6.49 0.58 0.17 175.55 8 286 106

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 150.00 8 335 98
Positive moment at midspan 0.056 5.68 0.59 0.17 166.29 8 302 98

Minimum effective depth reqd dre= 48.48 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 98 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 150 mm^2

Deflection check

Reinf provided at midspan along short direction 287.23 mm^2 Dia 8 at 175 mm
Stress in reinforcement fs= 147.108 N/mm^2
Percentage of reinforcement provided pt= 0.27097 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 65.00 mm
Effective depth provided 106 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.056 0.06 0.064 0.068 0.072 0.076 0.079 0.082 0.085 0.087 0.089

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 2.90473

k d Z X pt As

0 106 3.611 0.753 0 4.795 0

0.5773 106 3.611 0.753 0.1656 4.63 175.5
0 98 3.611 0.753 0 4.795 0
0.591 98 3.611 0.753 0.1697 4.626 166.3
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.091 0.094 0.096 0.098 0.1 0.102 0.103 0.104 0.106 0.107 0.056
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S11

Short span S= 3.80 mts

Long span L= 7.60 mts
Assumed slab thickness t= 0.150 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel One long edge continuous

Loads
7.60 mts
Self weight of slab w1= 3.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 3.37 kN/m^2 10.62 3.80 mts
kN/m^2
Ratio of long span to short span R= 2
Design Load with load factor of 1.5 Wu= 15.93 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.097 22.31 1.32 0.40 518.51 10 151 130
Positive moment at midspan 0.073 16.79 0.99 0.29 381.06 10 206 130

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 10 436 120
Positive moment at midspan 0.043 9.89 0.69 0.20 238.15 10 330 120

Minimum effective depth reqd dre= 89.91 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 120 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 180 mm^2

Deflection check

Reinf provided at midspan along short direction 785.40 mm^2 Dia 10 at 100 mm
Stress in reinforcement fs= 116.782 N/mm^2
Percentage of reinforcement provided pt= 0.60415 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 95.00 mm
Effective depth provided 130 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.043 0.046 0.048 0.051 0.053 0.055 0.057 0.059 0.06 0.062 0.064

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 2.154

k d Z X pt As

1.3203 130 3.611 0.753 0.3989 4.396 518.5

0.9936 130 3.611 0.753 0.2931 4.502 381.1
0 120 3.611 0.753 0 4.795 0
0.6869 120 3.611 0.753 0.1985 4.597 238.2
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.065 0.066 0.067 0.068 0.069 0.07 0.071 0.072 0.072 0.073 0.043
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S14

Short span S= 4.75 mts

Long span L= 6.10 mts
Assumed slab thickness t= 0.150 mts
Grade of concrete fck= 20 N/mm^2
Grade of reinforcement fy= 415 N/mm^2

Type of panel Two long edges discontinuous

Loads
6.10 mts
Self weight of slab w1= 3.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 1.00 kN/m^2 8.25 4.75 mts
kN/m^2
Ratio of long span to short span R= 1.3
Design Load with load factor of 1.5 Wu= 12.38 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 8 279 131
Positive moment at midspan 0.057 15.92 0.93 0.27 356.75 8 141 131

Long span direction

Negative moment at continuous edge 0.045 12.56 0.84 0.25 300.70 10 261 122
Positive moment at midspan 0.035 9.77 0.66 0.19 230.98 10 340 122

Minimum effective depth reqd dre= 75.94 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 122 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 180 mm^2

Deflection check

Reinf provided at midspan along short direction 523.60 mm^2 Dia 10 at 150 mm
Stress in reinforcement fs= 163.998 N/mm^2
Percentage of reinforcement provided pt= 0.39969 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.98353

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 119.74 mm
Effective depth provided 130 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.035 0.039 0.043 0.047 0.051 0.054 0.057 0.06 0.063 0.066 0.068

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.98353

k d Z X pt As

0 131 3.611 0.753 0 4.795 0

0.9274 131 3.611 0.753 0.2723 4.523 356.7
0.8442 122 3.611 0.753 0.2465 4.549 300.7
0.6566 122 3.611 0.753 0.1893 4.606 231
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0.045

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.071 0.073 0.076 0.078 0.08 0.082 0.084 0.085 0.087 0.088 0.035
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S15b

Short span S= 4.30 mts

Long span L= 8.30 mts
Assumed slab thickness t= 0.350 mts
Grade of concrete fck= 25 N/mm^2
Grade of reinforcement fy= 500 N/mm^2

Type of panel Two short edges discontinuous

Loads
8.30 mts
Self weight of slab w1= 8.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 22.00 kN/m^2 TOTAL
Miscellaneous w4= 35.48 kN/m^2 67.73 4.30 mts
kN/m^2
Ratio of long span to short span R= 1.95
Design Load with load factor of 1.5 Wu= 101.59 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.068 127.74 1.18 0.29 947.39 12 119 329
Positive moment at midspan 0.052 97.68 0.90 0.22 711.29 10 110 330

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 420.00 10 187 318
Positive moment at midspan 0.035 65.75 0.64 0.15 487.23 10 161 320

Minimum effective depth reqd dre= 192.42 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 320 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 420 mm^2

Deflection check

Reinf provided at midspan along short direction 785.40 mm^2 Dia 10 at 100 mm
Stress in reinforcement fs= 262.635 N/mm^2
Percentage of reinforcement provided pt= 0.238 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.46833

Type of slab for deflection check Continuous

Basic span to effective depth ratio 21
Minimum effective depth reqd from deflection criteria 139.45 mm
Effective depth provided 330 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

5
1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
1 0.032 0.035 0.037 0.04 0.043 0.045 0.047 0.049 0.051 0.052 0.053
2 0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057
3 0.037 0.041 0.044 0.048 0.052 0.055 0.057 0.06 0.063 0.065 0.067
4 0.047 0.05 0.053 0.057 0.06 0.063 0.065 0.068 0.071 0.073 0.075
5 0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06
6 0 0 0 0 0 0 0 0 0 0 0
7 0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084
8 0 0 0 0 0 0 0 0 0 0 0
9 0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.035 0.036 0.037 0.039 0.04 0.042 0.043 0.044 0.044 0.045 0.045

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 21 1.46833
k d Z X pt As

1.1801 329 4.35 0.874 0.288 4.687 947.4

0.897 330 4.35 0.874 0.2155 4.76 711.3
0 318 4.35 0.874 0 4.975 0
0.6421 320 4.35 0.874 0.1523 4.823 487.2
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.046 0.047 0.048 0.048 0.049 0.05 0.05 0.051 0.052 0.052 0.035
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S15b

Short span S= 2.40 mts

Long span L= 4.50 mts
Assumed slab thickness t= 0.350 mts
Grade of concrete fck= 25 N/mm^2
Grade of reinforcement fy= 500 N/mm^2

Type of panel One short edge discontinuous

Loads
4.50 mts
Self weight of slab w1= 8.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 22.00 kN/m^2 TOTAL
Miscellaneous w4= 38.00 kN/m^2 70.25 2.40 mts
kN/m^2
Ratio of long span to short span R= 1.9
Design Load with load factor of 1.5 Wu= 105.38 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.066 40.06 0.37 0.09 420.00 10 187 330
Positive moment at midspan 0.051 30.95 0.28 0.07 420.00 10 187 330

Long span direction

Negative moment at continuous edge 0.037 22.46 0.22 0.05 420.00 10 187 320
Positive moment at midspan 0.028 16.99 0.17 0.04 420.00 10 187 320

Minimum effective depth reqd dre= 107.76 mm

Clear cover to any reinforcement c= 15 mm
Minimum effective depth provided dpr= 320 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 420 mm^2

Deflection check

Reinf provided at midspan along short direction 448.80 mm^2 Dia 10 at 175 mm
Stress in reinforcement fs= 271.391 N/mm^2
Percentage of reinforcement provided pt= 0.136 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.79424

Type of slab for deflection check Continuous

Basic span to effective depth ratio 23
Minimum effective depth reqd from deflection criteria 58.16 mm
Effective depth provided 330 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.037 0.04 0.043 0.046 0.048 0.05 0.051 0.053 0.055 0.056 0.057

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.028 0.03 0.032 0.034 0.036 0.038 0.039 0.04 0.041 0.043 0.044

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 23 1.79424
k d Z X pt As

0.3679 330 4.35 0.874 0.0861 4.889 284

0.2843 330 4.35 0.874 0.0662 4.909 218.5
0.2193 320 4.35 0.874 0.0509 4.924 163
0.166 320 4.35 0.874 0.0385 4.937 123
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.045 0.046 0.047 0.047 0.048 0.049 0.05 0.051 0.051 0.052 0.028
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S15b

Short span S= 4.05 mts

Long span L= 6.75 mts
Assumed slab thickness t= 0.150 mts
Grade of concrete fck= 25 N/mm^2
Grade of reinforcement fy= 500 N/mm^2

Type of panel Four edges discontinuous

Loads
6.75 mts
Self weight of slab w1= 3.75 kN/m^2
Floor finish w2= 1.50 kN/m^2
Live load w3= 2.00 kN/m^2 TOTAL
Miscellaneous w4= 1.00 kN/m^2 8.25 4.05 mts
kN/m^2
Ratio of long span to short span R= 1.7
Design Load with load factor of 1.5 Wu= 12.38 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 8 279 126
Positive moment at midspan 0.098 19.89 1.25 0.31 386.80 8 130 126

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 180.00 8 279 118
Positive moment at midspan 0.056 11.37 0.82 0.20 230.50 8 218 118

Minimum effective depth reqd dre= 75.93 mm

Clear cover to any reinforcement c= 20 mm
Minimum effective depth provided dpr= 118 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 180 mm^2

Deflection check

Reinf provided at midspan along short direction 785.40 mm^2 Dia 10 at 100 mm
Stress in reinforcement fs= 142.82 N/mm^2
Percentage of reinforcement provided pt= 0.62333 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.79669

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 112.71 mm
Effective depth provided 125 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0 0 0 0 0 0 0 0 0 0 0

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.056 0.06 0.064 0.068 0.072 0.076 0.079 0.082 0.085 0.087 0.089

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.79669

k d Z X pt As

0 126 4.35 0.874 0 4.975 0

1.253 126 4.35 0.874 0.307 4.668 386.8
0 118 4.35 0.874 0 4.975 0
0.8164 118 4.35 0.874 0.1953 4.78 230.5
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.091 0.094 0.096 0.098 0.1 0.102 0.103 0.104 0.106 0.107 0.056
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S15b

Short span S= 5.10 mts

Long span L= 7.15 mts
Assumed slab thickness t= 0.200 mts
Grade of concrete fck= 25 N/mm^2
Grade of reinforcement fy= 500 N/mm^2

Type of panel One long edge continuous

Loads
7.15 mts
Self weight of slab w1= 5.00 kN/m^2
Floor finish w2= 0.00 kN/m^2
Live load w3= 4.00 kN/m^2 TOTAL
Miscellaneous w4= 5.37 kN/m^2 14.37 5.10 mts
kN/m^2
Ratio of long span to short span R= 1.45
Design Load with load factor of 1.5 Wu= 21.56 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.082 45.97 1.48 0.37 648.51 8 78 176
Positive moment at midspan 0.062 34.76 1.14 0.28 483.46 10 162 175

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 240.00 8 209 168
Positive moment at midspan 0.043 24.11 0.87 0.21 348.57 8 144 166

Minimum effective depth reqd dre= 115.44 mm

Clear cover to any reinforcement c= 20 mm
Minimum effective depth provided dpr= 166 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 240 mm^2

Deflection check

Reinf provided at midspan along short direction 628.32 mm^2 Dia 10 at 125 mm
Stress in reinforcement fs= 223.143 N/mm^2
Percentage of reinforcement provided pt= 0.35904 %
Modification factor as per fig 4 of IS:456-2000 MF= 1.50267

Type of slab for deflection check Simply supported

Basic span to effective depth ratio 20
Minimum effective depth reqd from deflection criteria 169.70 mm
Effective depth provided 175 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.057 0.061 0.064 0.068 0.071 0.074 0.076 0.078 0.08 0.082 0.084

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.043 0.046 0.048 0.051 0.053 0.055 0.057 0.059 0.06 0.062 0.064

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Simply supported 20 1.50267

k d Z X pt As

1.4841 176 4.35 0.874 0.3685 4.607 648.5

1.135 175 4.35 0.874 0.2763 4.699 483.5
0 168 4.35 0.874 0 4.975 0
0.8749 166 4.35 0.874 0.21 4.765 348.6
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.065 0.066 0.067 0.068 0.069 0.07 0.071 0.072 0.072 0.073 0.043
DESIGN OF TYPICAL SLAB

DESIGN OF TWO WAY SLAB S15b

Short span S= 5.30 mts

Long span L= 7.90 mts
Assumed slab thickness t= 0.225 mts
Grade of concrete fck= 25 N/mm^2
Grade of reinforcement fy= 500 N/mm^2

Type of panel Two short edges discontinuous

Loads
7.90 mts
Self weight of slab w1= 5.63 kN/m^2
Floor finish w2= 0.00 kN/m^2
Live load w3= 4.00 kN/m^2 TOTAL
Miscellaneous w4= 5.37 kN/m^2 15.00 5.30 mts
kN/m^2
Ratio of long span to short span R= 1.5
Design Load with load factor of 1.5 Wu= 22.49 kN/m^2

Design
Coeff BM k pt Ast Dia Spacing d
Short span direction
Negative moment at continuous edge 0.06 37.91 0.94 0.23 454.20 8 111 201
Positive moment at midspan 0.045 28.43 0.70 0.17 336.50 8 149 201

Long span direction

Negative moment at continuous edge 0 0.00 0.00 0.00 270.00 8 186 193
Positive moment at midspan 0.035 22.11 0.59 0.14 271.05 8 185 193

Minimum effective depth reqd dre= 104.82 mm

Clear cover to any reinforcement c= 20 mm
Minimum effective depth provided dpr= 193 mm greater than 'min. eff depth reqd'. Hence ok
Minimum reinforcement Amin= 270 mm^2

Deflection check

Reinf provided at midspan along short direction 502.65 mm^2 Dia 8 at 100 mm
Stress in reinforcement fs= 194.138 N/mm^2
Percentage of reinforcement provided pt= 0.25008 %
Modification factor as per fig 4 of IS:456-2000 MF= 2

Type of slab for deflection check Continuous

Basic span to effective depth ratio 21
Minimum effective depth reqd from deflection criteria 126.19 mm
Effective depth provided 201 mm greater than 'min. eff depth reqd'. Hence ok
Interior panel
One short edge discontinuous
One long edge discontinuous
Two adjacent sides discontinuous
Two short edges discontinuous
Two long edges discontinuous
One long edge continuous
One short edge continuous
Four edges discontinuous

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.045 0.047 0.049 0.051 0.052 0.054 0.056 0.058 0.059 0.06 0.06

1 1.05 1.1 1.15 1.2 1.25 1.3 1.35 1.4 1.45 1.5
0.035 0.036 0.037 0.039 0.04 0.042 0.043 0.044 0.044 0.045 0.045

1 Continuous 26
2 Continuous 23
3 Continuous 21
4 Continuous 21
5 Continuous 21
6 Simply supported 20
7 Simply supported 20
8 Simply supported 20
9 Simply supported 20

Continuous 21 2.11006
k d Z X pt As

0.9383 201 4.35 0.874 0.226 4.749 454.2

0.7037 201 4.35 0.874 0.1674 4.808 336.5
0 193 4.35 0.874 0 4.975 0
0.5937 193 4.35 0.874 0.1404 4.835 271
1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2
0.054 0.056 0.057 0.059 0.06 0.061 0.062 0.063 0.064 0.065 0.032
0.059 0.06 0.061 0.063 0.064 0.065 0.066 0.066 0.067 0.068 0.037
0.069 0.071 0.073 0.075 0.077 0.079 0.08 0.082 0.084 0.085 0.037
0.077 0.079 0.08 0.082 0.084 0.085 0.087 0.088 0.09 0.091 0.047
0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0
0 0 0 0 0 0 0 0 0 0 0.045
0.085 0.087 0.088 0.09 0.091 0.092 0.093 0.095 0.096 0.097 0
0 0 0 0 0 0 0 0 0 0 0.057
0 0 0 0 0 0 0 0 0 0 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.061 0.062 0.063 0.064 0.065 0.066 0.067 0.067 0.068 0.069 0

1.55 1.6 1.65 1.7 1.75 1.8 1.85 1.9 1.95 2

0.046 0.047 0.048 0.048 0.049 0.05 0.05 0.051 0.052 0.052 0.035

Agreement For Constrution of GREY STRUCTURE
100% (1)
Agreement For Constrution of GREY STRUCTURE
8 pages
Two Way Slab Design Excel Sheet
100% (1)
Two Way Slab Design Excel Sheet
11 pages
Two Way Slab Design Excel Sheet
86% (7)
Two Way Slab Design Excel Sheet
13 pages
Moveable Steel Bridge
No ratings yet
Moveable Steel Bridge
24 pages
OpenSees Super Tall Building
No ratings yet
OpenSees Super Tall Building
9 pages
Slab Design Excel
100% (1)
Slab Design Excel
5 pages
SLAB-1AF-S1
No ratings yet
SLAB-1AF-S1
8 pages
S1, S2 - S3 - S4 - Merged
No ratings yet
S1, S2 - S3 - S4 - Merged
4 pages
Design of One-Way Slab: Loads
No ratings yet
Design of One-Way Slab: Loads
49 pages
Twoway Slab - 11-02-2020
No ratings yet
Twoway Slab - 11-02-2020
71 pages
3
No ratings yet
3
8 pages
Slab Design
No ratings yet
Slab Design
1 page
Development of Maa Samleswari at Sambalpur Design of Slab - Pilgrim Facility Two Way Slab
No ratings yet
Development of Maa Samleswari at Sambalpur Design of Slab - Pilgrim Facility Two Way Slab
2 pages
Ilide - Info Two Way Slab Design Excel Sheet PR
No ratings yet
Ilide - Info Two Way Slab Design Excel Sheet PR
13 pages
Design Data: Design of Floor Slab Continous
No ratings yet
Design Data: Design of Floor Slab Continous
12 pages
Slab Design
No ratings yet
Slab Design
11 pages
Design of Slab: Ly/lx 2. So This Is Two Way Slab
No ratings yet
Design of Slab: Ly/lx 2. So This Is Two Way Slab
6 pages
Design of Slabs: DESIGN OF TWO-WAY SLAB (As Per IS456:2000)
No ratings yet
Design of Slabs: DESIGN OF TWO-WAY SLAB (As Per IS456:2000)
4 pages
Two Wayslabs Typical
No ratings yet
Two Wayslabs Typical
10 pages
Slab Design -S1
No ratings yet
Slab Design -S1
10 pages
Dinesh Slab
No ratings yet
Dinesh Slab
12 pages
Two way Slab
No ratings yet
Two way Slab
11 pages
Bimal Slab
No ratings yet
Bimal Slab
12 pages
Two Way Slab Design in MM Format
No ratings yet
Two Way Slab Design in MM Format
5 pages
Short Reinforcement Long Reinforcement: +ive in Span Due To
No ratings yet
Short Reinforcement Long Reinforcement: +ive in Span Due To
1 page
Design Data: Design of Floor Slab
No ratings yet
Design Data: Design of Floor Slab
1 page
Two Way Slab
No ratings yet
Two Way Slab
4 pages
Two Way Slab Design Excel Sheet
No ratings yet
Two Way Slab Design Excel Sheet
11 pages
TWOWAY
No ratings yet
TWOWAY
14 pages
Short Reinforcement Long Reinforcement: +ive in Span Due To
No ratings yet
Short Reinforcement Long Reinforcement: +ive in Span Due To
1 page
Slab Format New
No ratings yet
Slab Format New
6 pages
Slab 1
No ratings yet
Slab 1
1 page
One short edge dis1
No ratings yet
One short edge dis1
2 pages
Deflection Check For Slab
No ratings yet
Deflection Check For Slab
1 page
S1
100% (1)
S1
11 pages
RCC Two Way Slab BS 8110
100% (1)
RCC Two Way Slab BS 8110
9 pages
Typ. TW Slab - r3!2!175mm
No ratings yet
Typ. TW Slab - r3!2!175mm
2 pages
Two Way Slab Design
No ratings yet
Two Way Slab Design
6 pages
One-Way Way Slab Design: Vintech Consultants
No ratings yet
One-Way Way Slab Design: Vintech Consultants
2 pages
Tuangoma (Two Way Slabs)
No ratings yet
Tuangoma (Two Way Slabs)
3 pages
RCD Course Work
No ratings yet
RCD Course Work
60 pages
RCD Course Work PDF
No ratings yet
RCD Course Work PDF
60 pages
DESIGN OF SLAB AT EL+7.6m (5.105 M X3.74 M) Grid1-2
No ratings yet
DESIGN OF SLAB AT EL+7.6m (5.105 M X3.74 M) Grid1-2
4 pages
Manual Design of Two Way Slab
No ratings yet
Manual Design of Two Way Slab
5 pages
Slab Design Calculation: f (5* f A /8 A β
100% (1)
Slab Design Calculation: f (5* f A /8 A β
1 page
Design of Two Way Slab (IS 456:2000) (Limit State Method) : 1 Analysis
No ratings yet
Design of Two Way Slab (IS 456:2000) (Limit State Method) : 1 Analysis
4 pages
Slab Design
No ratings yet
Slab Design
29 pages
Slab Detail
No ratings yet
Slab Detail
4 pages
Design of Two Way Slab by Limit State Method
No ratings yet
Design of Two Way Slab by Limit State Method
3 pages
Job No.: Design By: Date: Page No.: Spreadsheet of
No ratings yet
Job No.: Design By: Date: Page No.: Spreadsheet of
3 pages
Slab Design
No ratings yet
Slab Design
8 pages
Design of Slab (Two Way)
No ratings yet
Design of Slab (Two Way)
32 pages
4
No ratings yet
4
1 page
Two Way Slab
No ratings yet
Two Way Slab
36 pages
Design of Two Way Slab: 1.0 General Data
No ratings yet
Design of Two Way Slab: 1.0 General Data
34 pages
Short Reinforcement Long Reinforcement: +ive in Span Due To
No ratings yet
Short Reinforcement Long Reinforcement: +ive in Span Due To
14 pages
Desig of Two Way & One Way Slab
No ratings yet
Desig of Two Way & One Way Slab
27 pages
Sec2 Flat Slab
No ratings yet
Sec2 Flat Slab
7 pages
Design of Two Way Slab
No ratings yet
Design of Two Way Slab
8 pages
Slab Design
No ratings yet
Slab Design
6 pages
Helical Compression Cylindrical Springs
From Everand
Helical Compression Cylindrical Springs
Andrea Faussone
No ratings yet
O level Physics Structured Practice 3
From Everand
O level Physics Structured Practice 3
Esther Chen
No ratings yet
Gage Making and Lapping
From Everand
Gage Making and Lapping
CSPacademic
No ratings yet
RCC14 Crack Width
No ratings yet
RCC14 Crack Width
4 pages
Uasbr - Water Tank Wall Panel Design
No ratings yet
Uasbr - Water Tank Wall Panel Design
25 pages
Water Tank
No ratings yet
Water Tank
8 pages
Developement Length, LD
No ratings yet
Developement Length, LD
3 pages
Isolated Footing
No ratings yet
Isolated Footing
8 pages
Crack Width-Bs-Is
No ratings yet
Crack Width-Bs-Is
5 pages
Durability of Lime Stabilized Earth Blocks: A Guettala, H. Houari, B. Mezghiche AND R. Chebili
No ratings yet
Durability of Lime Stabilized Earth Blocks: A Guettala, H. Houari, B. Mezghiche AND R. Chebili
6 pages
PVC Sheetpile-1
No ratings yet
PVC Sheetpile-1
6 pages
LRFD 0.9F 0.75F 0.99F: LR F A LR
No ratings yet
LRFD 0.9F 0.75F 0.99F: LR F A LR
4 pages
Construction Supervision of Dodola - Sebsebewasha - Goba Maintenance Road
No ratings yet
Construction Supervision of Dodola - Sebsebewasha - Goba Maintenance Road
42 pages
Aerodynamic Analysis of Wind Turbine-1
No ratings yet
Aerodynamic Analysis of Wind Turbine-1
1 page
Sample Design Fire Pro
No ratings yet
Sample Design Fire Pro
22 pages
Chapter 04
100% (1)
Chapter 04
27 pages
Row House Plan
No ratings yet
Row House Plan
1 page
Faculty - Architecture, Planning, and Surveying - 2023 - Session 1 - Degree - Aaa451
No ratings yet
Faculty - Architecture, Planning, and Surveying - 2023 - Session 1 - Degree - Aaa451
4 pages
Soil Report - 0667
No ratings yet
Soil Report - 0667
34 pages
Road Qty - S-R-SH-10-Total Project ECL - PCL Offset
No ratings yet
Road Qty - S-R-SH-10-Total Project ECL - PCL Offset
1 page
Igc 2005
No ratings yet
Igc 2005
6 pages
Dam Site Evaluation - Selection of Dam Type
No ratings yet
Dam Site Evaluation - Selection of Dam Type
4 pages
Shield's Expression
100% (3)
Shield's Expression
6 pages
Squeeze Film Bearing
No ratings yet
Squeeze Film Bearing
6 pages
Mufti 2002
No ratings yet
Mufti 2002
15 pages
Air Duct Sizing - SI & Imperial Units
100% (1)
Air Duct Sizing - SI & Imperial Units
2 pages
Two Way Slab
No ratings yet
Two Way Slab
1 page
Plinth Area Rates 2020
No ratings yet
Plinth Area Rates 2020
27 pages
Kurian, Nainan - Introduction to Modern Techniques in Geotechnical and Foundation Engineering, An.-alpha Science International (2013)
No ratings yet
Kurian, Nainan - Introduction to Modern Techniques in Geotechnical and Foundation Engineering, An.-alpha Science International (2013)
376 pages
Tunnel Boring Machine
No ratings yet
Tunnel Boring Machine
2 pages
Milan Road Buildtech LLP
No ratings yet
Milan Road Buildtech LLP
11 pages
Cubipod Manual 2016
No ratings yet
Cubipod Manual 2016
19 pages
Draft Amendment To IRC SP 59 2019 (H-4)
No ratings yet
Draft Amendment To IRC SP 59 2019 (H-4)
26 pages
E 307-15
No ratings yet
E 307-15
2 pages
Ae Civil Under Trade Commerce 2016 Engineering Paper III
No ratings yet
Ae Civil Under Trade Commerce 2016 Engineering Paper III
6 pages