Scribd
Upload
3 views

TP2RES

Uploaded by

Habibti Habibti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

TP2RES

Uploaded by

Habibti Habibti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

TASK 1:

Step 1:
Build a network topology.

Step 02:
We will power off laptop remove classical ethernet card and will add
Wireless Interface Card (WPC300N).
Step 03:
We will configure our DHCP server.

Step 04:
We will assign dynamic ip to our laptop from DHCP server through
access point.
TASK 2:
Step 1:
Build a network topology.

Step 02:
We will power off laptops remove classical ethernet card and will
add Wireless Interface Card (WPC300N).
Step 03:
Now we will configure our wireless router. We can do it by
two ways.
1) through directly clicking GUI of wirless router
2) Using a browser in a PC or laptop in the LAN.
First, we will do it by using browser in PC or laptop.

After giving default user name (admin) and password (admin) we can
access the GUI of the router.
Step 04:
We’ll begin with Administration in the GUI. we will click on the
Administration tab and set a new password for administrative access
and save settings.

After this we will do LAN Setup and Internet Setup.


Step 05:
Adding security for wireless LAN access

Then we will check it that whether its working or not


We go to PC or laptop and then its desktop and wireless and we will
give our pass key which we have set in our router for wireless.
Step 06: Internet Setup

We will finally check It by pinging with other device

You might also like