CLI Reference Guide

OSA 5422

Product Release: 11.1.1

Document Issue: Issue A
Document Number: 80000067464
Oscilloquartz: An ADVA Company

Copyright © 2020-2022 Oscilloquartz: An ADVA Company

All rights reserved. Hardware and software mentioned in this document includes software developed by
Oscilloquartz: An ADVA Company ("Oscilloquartz: An ADVA Company"), the Apache Software Foundation
(http://www.apache.org), Teodor Danciu (http://jasperreports.sourceforge.net), and/or other open source
software.

libnetconf - Copyright and Permission Notice

Copyright (c) 2012-2014 CESNET, z.s.p.o.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of the Company nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.

This software is provided "as is", and any express or implied warranties, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the
company or contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential
damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or
profits; or business interruption) however caused and on any theory of liability, whether in contract, strict
liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if
advised of the possibility of such damage.

Patents
The content described in this document may be covered by patents or pending patent applications of
Oscilloquartz: An ADVA Company. The furnishing of this document does not give you any license to these
patents.

Disclaimers
Nothing in this document shall be construed as granting any license or rights with respect to its content or the
patents and trademarks mentioned above. The content of this document may include technical inaccuracies or
typographical errors, and is subject to change at any time without notice. Reliance on this content is at the
relying party's sole risk and will not create any liability or obligation for Oscilloquartz: An ADVA Company. Any
references in this document to publications and/or Internet sites that are not from Oscilloquartz: An ADVA
Company are provided for convenience only and do not in any manner serve as an endorsement of those
publications and/or Internet sites. The materials within those publications and/or Internet sites are not part of
the materials for any Oscilloquartz: An ADVA Company information, product, or service, and use of those
publications and/or Internet sites is at your own risk.

THE CONTENT OF THIS DOCUMENT IS PROVIDED "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 2

Oscilloquartz: An ADVA Company

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ADVA OPTICAL NETWORKING, ITS AFFILIATES,
EMPLOYEES, OFFICERS OR ITS SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND BASED ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
DOCUMENT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. THE SAME APPLIES FOR ANY
HARDWARE OR SOFTWARE COVERED BY THIS DOCUMENT, UNLESS A SIGNED AGREEMENT WITH ADVA
OPTICAL NETWORKING OR THE APPLICABLE PRODUCT LIABILITY LAW EXPRESSLY STATES OTHERWISE.

Oscilloquartz: An ADVA Company

Fraunhoferstr. 9a
82152 Martinsried/Muenchen
Germany
Phone +49(0)89-890665-0
Fax +49(0)89-890665-699
http://www.adva.com

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 3

Contents
Contents 4

About This Guide 19

Documentation 20
Related Documentation 20
Accessing Documentation 20
Documentation Feedback 20
Obtaining Technical Assistance 21
Customer Portal 21
Technical Services 21
Call ADVA 22
Typographic Conventions 22

Getting Started 23
Signing In 24
Navigating the CLI 25
Keyboard Shortcuts 26
Commands Available at All CLI Levels 26
Equipment and Entity Identifier (EID) Naming Conventions 28
Equipment and Entity Identifier (EID) Naming Conventions 42

Overview of the CLI Structure 57

admin config-file Commands 58
admin database Commands 59
admin diagnostics Commands 61
admin last-reset-cause Commands 62
admin sw-license Commands 63
admin upgrade Commands 64
configure communication Commands 65
configure ptp Commands 68
Configure Boundary Clock Commands 68
Configure Master Clock Commands 69
Configure NTE Commands 69
Configure PTP Clock Commands 70
Configure Telecom Slave Commands 73

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 4

Oscilloquartz: An ADVA Company Contents

configure ntp Commands 74

configure snmp Commands 75
configure system Commands 76
ACL-Entry Submenu Commands 78
Alarm Log Submenu Commands 78
Audit Log Submenu Commands 78
ICMPV4 Submenu Commands 78
ICMPV6 Submenu Commands 79
IPv4 Traffic ACL Entry Submenu Commands 79
IPv6 Traffic ACL Entry Submenu Commands 79
NTP Client Submenu Commands 80
Security Log Subment Commands 80
Syslog Server Submenu Commands 81
Time Zone Submenu Commands 81
configure user-security Commands 82
network element configure Commands 85
network-element ne-1 configure bits-x16 Commands 86
network-element ne-1 configure clk-x16 Commands 86
network-element ne-1 configure ge-4s Commands 87
network-element ne-1 configure irig-b Commands 87
network-element ne-1 configure nte Commands 88
network-element ne-1 configure psu Commands 88
network-element ne-1 configure sync Commands 88
network-element ne-1 configure syncjack Commands 89
network-element ne-1 configure time-clock 90
network-element ne-1 configure tod-pps-x16 Commands 90
network-element ne-1 configure disaply-card Commands 91
network-element ne-1 configure clk-x4-lpn Commands 91
Alarms and Conditions 92

Commands Reference 93
activate 94
active-gnss-system-types 97
accounting 99
accounting-port 101
access-order 103
add <user-id> 105
add activity 108
add arp-entry 110

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 5

Oscilloquartz: An ADVA Company Contents

add boundary-clock 111

add clock-probe 113
add community 116
add eqpt 118
add ip-route 120
add ipv6-route 122
add master-clock 124
add master-virtual-port 126
add mci 127
add mgmttnl 132
add nci 133
add ndp-entry 136
add ntp-clock 136
add ocs-port 137
add proxy-ndp 138
add ptp-clock 140
add ptp-clock-probe 142
add ptp-fp 146
add ptp-network-probe 148
add l3-ptp-port 151
add ptp-port 154
add sooc 159
add static-remote-slave 162
add syncref 165
add target-address 167
add target-params 171
add telecom-slave 173
add timeref 176
add usm-user 178
admin-state 181
advance-interference-detection 183
alarm-attributes 184
alarms-while-failure-suspend 185
alias 186
alias-port-n 186
announce-receipt-timeout 188
assumed-clock-class 189
assumed-ql 191
auth-protocol 193

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 6

Oscilloquartz: An ADVA Company Contents

auth-traps 194
auth-type 196
auto-diagnostic 197
backup-db 198
backup-server 199
bits-active-ports 200
bits-clock-ports 201
bits-line-impedance 203
bits-line-type 205
broadcast 206
buffer-size 208
cable-length 209
cancel activation 210
cancel validation-timer 213
cir 215
clear 217
clear all-history-data 220
clear curr-data 222
clear history-data 224
clear-lockout 226
clear-wtr 229
clock-active-ports 231
clock-pll-bw 232
clock-recovery-mode 234
clock set 235
cno-mask 237
cold-reset 237
config-ssl-strength 239
config-user <user-id> cli-paging 241
config-user <user-id> comment 243
config-user <user-id> login-timeout 245
config-user <user-id> password 247
config-user <user-id> priv-level 248
configure (acl) 250
configure (ipv4-traffic-acl) 252
configure (ipv6-traffic-acl) 254
configure (log-server) 256
configure feature 257
configure ip-version 258

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 7

Oscilloquartz: An ADVA Company Contents

configure ipv4-address 259

configure ipv6-address 261
configure src-addr 263
configure user-mtie-mask 264
configure usm-user-auth-key 266
configure usm-user-priv-key 268
const-te-clear-threshold 270
const-te-threshold 273
const-te-window 276
contact 279
control 280
control (ipv4-traffic-acl/ipv6-traffic-acl) 283
control-field 284
cos 286
country 288
delay-asym-comp-mode 288
delay-asym-comp-val 290
delay-asymmetry 292
delay-compensation 293
delay-response-timeout 295
delay-type 297
delay-value 298
delete <user-id> 299
delete activity 300
delete arp-entry 301
delete boundary-clock 303
delete clock-probe 304
delete community 306
delete dynamic-remote-slave 307
delete eqpt 309
delete history-result 310
delete ip-route 312
delete ipv6-route 314
delete master-clock 316
delete master-virtual-port 317
delete mci 318
delete mgmttnl 320
delete ndp-entry 321
delete ocs-port 323

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 8

Oscilloquartz: An ADVA Company Contents

delete ptp-clock 325

delete ptp-clock-probe 327
delete ptp-fp 328
delete ptp-network-probe 329
delete ptp-port 330
delete sooc 332
delete static-remote-slave 334
delete syncref 336
delete target-address 338
delete target-params 340
delete telecom-slave 341
delete timeref 342
delete usm-user 344
description (config-file) 346
dhcp-client-id 347
dhcp-client-id-control 350
dhcp-control 353
dhcp-ntp-server-control 355
dhcp-role 358
dhcpv6-control 360
direction 362
drop-echo-requests 365
drop-neighbor-advertisement 367
drop-neighbor-solicitation 369
drop-router-advertisement 371
drop-router-solicitation 373
dst-control 375
dst-end-day 377
dst-end-month 379
dst-end-time 381
dst-start-day 383
dst-start-month 385
dst-start-time 387
dst-utc-offset 389
eir 391
elevation-mask 393
email 394
e-Prtc-Mode 395
expected-ql 397

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 9

Oscilloquartz: An ADVA Company Contents

extension-type 398
failure-suspend-time 399
flush-arp-cache 400
flush-ndp-cache 401
forced-switch 402
fpp-cluster-assured 405
fpp-cluster-satisfied 407
frame-format (bits) 409
freq-source 411
ftp 412
ftp-port-number 413
gnss-system-types 415
http 417
https 419
icmpv4-filter 421
icmpv6-filter 422
ignore-antenna-condition 423
inner<n>-ethertype 424
inner<n>-untagged 426
inner<n>-vlan-list 428
input-signal-type 429
input-rate 430
install 431
installation-type 433
interference-squelch-control 434
ip-address (comms) 435
ip-address (rap) 438
ip-mode 440
ip-version 442
ip-version (rap) 445
ipv6-address (rap) 447
ipv6-sys-def-gateway 449
ipv6-unicast-addr 451
jamming-squelch-control 452
keys-entities 453
leap59 453
leap61 454
leap-second-date 454
line-code 455

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 10

Oscilloquartz: An ADVA Company Contents

list 457
list mgmttnl 458
list syncref 459
list sys-resource 460
load 461
locality 463
localpriority 464
location 467
lockout 469
log-anonyme-interval 472
log2file-control 474
lpbk-timer 476
manual-switch 477
master-announce-rcpt-timeout 479
master-ip-address 481
master-priority 484
master-syncrcp-timeout 486
max-te-clear-threshold 488
max-te-threshold 491
mdix 494
measurements-points 495
measurement-type 496
media 499
mgmt-traffic-bridge 500
mgmt-traffic-bridge-security 502
min-exp-clk-cls 503
mode 506
mtie-mask-name 506
mtie-mask-margin 508
mtie-mask-type 511
mtie-restart 514
mtu 517
name (ne, probe) 519
name (user) 521
nas-ip-address 522
nas-ipv6-address 524
netmask 526
network-clock-type 529
opr-lamptest 530

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 11

Oscilloquartz: An ADVA Company Contents

opr-lpbk 531
order 533
organization 535
organization-unit 536
outer-ethertype 537
outer-ethertype 539
outer-untagged 541
outer-vlan-list 543
outertag-prio-ctrl 544
pdop-mask 546
pdv-limit-assured 548
pdv-limit-satisfied 550
phase-performance-target 552
ping 554
ping6 555
pm-interval 556
poe 556
polling-interval 558
port 559
pps-generation 560
pps-width 561
prefix-length 562
primary-server 564
priority1 566
priority2 568
priority (sync/timeclock) 570
priority-mode 572
priority-mode-value 574
prompt 576
proxy-arp 578
ptp-flowpoint 579
ql-mode 582
reboot 583
reference, reference-eid 584
regenerate-ssh-keys 587
regenerate-ssl-certificate 588
relay-option 589
remove 590
remove diag-file 591

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 12

Oscilloquartz: An ADVA Company Contents

restart-with-configfile 592
restore-db 593
retries 594
revert to-standby 596
rip2Pkts-control 597
rip-ng-control 599
rls-lpbk 601
rpdv-frw-highrange 602
rpdv-frw-lowrange 604
rpdv-frw-mediumrange 606
rpdv-rev-highrange 608
rpdv-rev-lowrange 610
rpdv-rev-mediumrange 612
sa-bit 614
sat-min1-threshold 616
sat-min2-threshold 617
save 618
save diag-file 620
scp 621
secret 622
secure-mode 623
security-banner 625
security-prompt 626
security-strength 628
security-trap-type 630
self-survey-control 631
self-survey-period 633
selection-mode 635
serial 637
serial-disconnect-logoff 639
server-state 640
set-threshold 641
sftp 643
show 10mhz-port 644
show access-port 645
show acl-entry 647
show acl-list 649
show active-ssl-certificate 651
show activity 653

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 13

Oscilloquartz: An ADVA Company Contents

show alarm-attributes 654

show alarm-log 655
show alarm-log-config 657
show alarms 657
show all-communities 659
show all-features 660
show all-notify-entries 661
show all-slots 662
show all-target-addresses 663
show all-target-params 665
show all-users 666
show all-usm-users 668
show arp-entries 670
show audit-log 671
show audit-log-config 672
show bits-in 673
show bits-out 674
show bitsx8_group 675
show boundary-clock 677
show clkx16_group 678
show clk-x4-port-group 679
show clock-probe 681
show community 683
show conditions 684
show configfile 685
show configfile-status 688
show curr-data 689
show db-version 692
show dcn 693
show diag-file 694
show display-card 694
show dynamic-remote-slave 696
show eth0 699
show feature 701
show file-services-status 702
show gps-port 703
show history-data 705
show history-result 707
show icmpv4 710

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 14

Oscilloquartz: An ADVA Company Contents

show icmpv6 711

show ip-interface eth0 712
show ip-routes 713
show ipv6-routes 714
show ipv4-traffic-acl-entry 715
show ipv4-traffic-acl-list 716
show ipv6-traffic-acl-entry 718
show ipv6-traffic-acl-list 719
show l2-dynamic-remote-slave 721
show last-rcv-delay-rsp-msg 725
show last-rcv-sync-msg 727
show last-reset-info 728
show <linecardtype> 729
show local-user 730
show lpbk-params 732
show master-clock 733
show master-virtual-port 735
show mci 737
show mgmttnl 739
show nci 740
show ndp-entries 742
show ne-alarms 743
show ne-conditions 744
show network-element 745
show notify-entry 746
show nte 747
show ntp-client 748
show ntp-clock 749
show ocs-port 750
show perf-mon 752
show ping-result 755
show pps-port 756
show ppsx16_group 758
show provisioned-ssl-certificate 759
show psu 760
show ptp-clock 761
show ptp-clock-probe 763
show ptp-fp 765
show ptp-network-probe 768

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 15

Oscilloquartz: An ADVA Company Contents

show ptp-port 770

show rap-server 773
show release-versions 774
show remote-user 775
show running-config 777
show satellite-entries 778
show sec-log-config 780
show security-banner 781
show security-log 782
show security-system 784
show sfp-info 786
show shelf-info 787
show slot-info 788
show sooc 789
show src-addr 791
show static-remote-slave 792
show subnetwork 794
show sync 795
show sync-available-refs 797
show syncjack-telecom-slave 798
show syncref 800
show syslog-server 801
show system 802
show target-address 804
show target-params 806
show telecom-slave 807
show threshold-data 809
show time 812
show time-available-refs 812
show time-clock 814
show timeref 816
show time-zone 817
show tod-port 818
show trace-route-result 819
show user-mtie-mask 819
show usm-user 821
signal-direction (pps-port) 823
signal-direction (tod-port) 824
slave-ipv4-address 825

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 16

Oscilloquartz: An ADVA Company Contents

snmp-dying-gasp 827
snmp-engine-id 829
source-eid 830
source-type 834
speed 836
spoofing-squelch-control 836
squelch-ctrl 838
squelch-ql 839
ssh 841
state 842
svlan-control 844
svlan-id 846
swap-sada 847
switch-server 848
sym-key-authentication 849
sync-alias 850
sync-e-mode 852
sync-id 854
sync-receipt-timeout 856
sync-ref-alias 858
sync-ref-candidate 860
sync-ref-mode 862
sys-def-gateway 864
syslog-control 867
syslog-timestamp-format 869
system-defaults db 870
system-defaults value-file 873
system-tod-ptp-clk 876
system-tod-type 877
tacacs-privilege-control 879
tacacs-user-privilege 881
target-mtie-performance 883
telnet 885
test-alarm 886
time-clock-alias 888
time-code 889
time-holdover-performance 891
time-ref-alias 893
time-reference-loss-handling 894

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 17

Oscilloquartz: An ADVA Company Contents

timeout 895
time-zone-name 896
trace-route 897
trace-route6 899
transfer-file 901
unicast-restart-timer 908
unicast-timeout 910
unlock-user 912
utc-offset 914
utc-to-tai-offset 914
valid-until 916
vlan-id 917
wtr-time 919
x-y-display-points 920

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 18

About This Guide
This guide provides complete reference information for the OSA 5422 CLI. The CLI provides
a text-based system for local configuration and management of the OSA 5422 functions.
You can access the CLI through the RS-232 serial console port direct connection, or telnet /
ssh session.

Table 1 provides a brief description of the main sections in the OSA 5422 CLI Reference
Guide.

Table 1: Main Sections with Descriptions

Section Description
Getting Started Information about signing in and preconfigured logging in
accounts.
Signing In
Description of the methods to navigate within the CLI.
Navigating the CLI
Lists entity identifier and argument names in alphabetical
order and identifies the valid entry for each one:
Equipment and Entity Identifier (EID) Naming Conventions
Lists parameters valid values and rules for each parameter.
Parameter Rules and Valid Entries
Overview of the A summary of the major commands groups and their sublevel
CLI Structure command groups and commans.

Overview of the CLI Structure

Commands Reference CLI commands reference information:
Commands Reference

For defect resolution and functional additions, see the Release Notes.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 19

Documentation
Related Documentation 20
Accessing Documentation 20
Documentation Feedback 20

Related Documentation
These documents provide additional information about the OSA 5422:

• OSA 54xx Safety Guide

• GNSS Antennas and Accessories Installation Guide

• FSP 150 Ethernet Access Compatibility Matrix

• Pluggable Transceiver Module Specification

• OSA 5422 Installation and Commissioning Manual

• OSA 5422 Provisioning and Operations Manual

• OSA 5422 System Description

• OSA 5422 SNMP User Guide

Accessing Documentation
Documentation Portal https://advadocs.com/

Documentation Feedback
We want our documentation to be as helpful as possible. Feedback is always welcome.

Email [email protected]
Mail ADVA Optical Networking
Technical Documentation
Märzenquelle 1-3
98617 Meiningen-Dreissigacker
Germany

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 20

Obtaining Technical Assistance
Product Maintenance Agreements and other customer assistance agreements are available
for Oscilloquartz: An ADVA Company products through your Oscilloquartz: An ADVA
Company distribution channel. Our service options include:

l 24 x 7 telephone support
l Web-based support tools
l On-site support
l Technical training, both on-site and at ADVA facilities in Germany and the USA
l Expedited repair service
l Extended hardware warranty service

Customer Portal
You can use the customer portal to:

l Access company information and resources 24 x 7.

l Find information specific to your requirements, such as networking solutions,
services, and programs.
l Resolve technical issues by using online support services.
l Download and test software packages.
l Order ADVA training materials.

Access https://www.advaoptical.com/en/customer-portal
Questions [email protected]

Technical Services
Technical services are available to customers who need technical assistance with an
Oscilloquartz: An ADVA Company product that is under warranty or covered by a
maintenance contract.

Online https://www.advaoptical.com/en/about-us/contact
Email [email protected]

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 21

Call ADVA
Europe, Middle East and Africa
Martinsried/Munich, Germany
+49 (0)89 89 06 65 0

North America
Norcross, GA, USA
+1 678 728 8600

Asia
Shenzhen, China
+86 755 8621 7400

Typographic Conventions
This manual follows these typographic conventions:

Convention Description
show Commands and command keywords.
<control> Reference to command arguments, which you replace with
values.
csm-1 | csm-2 Alternative options.
[disabled | enabled] When enclosed within square brackets, the selection is
optional. Typically, the default value is specified in the
command description.
Courier New Terminal session output and command examples.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 22

 Chapter 1

Getting Started
All the editable fields in the CLI support only US-ASCII characters. Extended ASCII characters
are not supported.

Signing In 24
Navigating the CLI 25
Equipment and Entity Identifier (EID) Naming Conventions 28
Equipment and Entity Identifier (EID) Naming Conventions 42

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 23

Signing In
The CLI is available on the local serial management port as well as via telnet and SSH
(Secure Shell) sign in. You can access Telnet and SSH sign in via the local management LAN
interface.

The CLI is preconfigured with three user accounts. The default password for the
preconfigured accounts is "ChgMeNOW".

l root — superuser permissions. Access to all commands, including user

administration commands.
l netadmin — provisioning permissions. Access to all commands with the exception
of other user administration options.
l user — maintenance permissions. Access to a limited set of commands which
support maintenance actions, such as testing, loopbacks, diagnostics.

The CLI supports four permission levels:

Table 2: Permission Levels

Permissions Level Description
Superuser Access to all commands, including user administration commands.
Provisioning Access to all commands with the exception of other user
administration options.
Maintenance Access to a limited set of commands which support maintenance
actions, such as testing, loopbacks, diagnostics.
Retrieve Access to retrieve-only commands for displaying configuration
settings and performance data.

To sign into the CLI:

After establishing a connection, type in your assigned user name and password. The default
timeout for preconfigured accounts is 15 minutes.

Copyright (c) 2007-2019 ADVA Optical Networking. All rights reserved.

Login: root
Password:
**************************************************************************
This is a private system. Unauthorized access or use may lead to prosecution.
**************************************************************************
ADVA-->

You can change the default ADVA--> prompt using the prompt command.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 24

Oscilloquartz: An ADVA Company Getting Started

To exit the CLI, type in quit.

Navigating the CLI

The ADVA CLI is a hierarchically structured language. A successful log in places the prompt
at the root level – the top-most level. Each sub-level provides access to system provisioning
commands and to various levels of configuration settings for ports, interfaces and other
service definitions.

To navigate in the CLI:

1. At the root level prompt, type in ? to display the main command groups.

ADVA--> ?
admin Administration command options
configure Configuration options
network-element Network Element submenu options

2. Type one of the main command groups followed by a space and ? to display sublevel
commands for that group.

ADVA--> configure ?
communication Enter the communications configuration submenu
ntp Enter the NTP configuration submenu
ptp Enter the PTP configuration submenu
snmp Enter the SNMP configuration submenu
system Enter the system configuration submenu
user-security Enter the user security configuration submenu

3. Combine the main command group with one of its sublevel commands and press Enter
to step down in the CLI hierarchy:

ADVA--> configure communication

The prompt indicates that you are now at the communication command level:
ADVA:comms-->

4. Type in a ? at the end of a command or half-way through as you type to display available
command options. For additional navigation commands, see Keyboard Shortcuts.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 25

Oscilloquartz: An ADVA Company Getting Started

Keyboard Shortcuts
l Type in ? after a word to display available command options.
l Press TAB halfway through a word to autocomplete the word (if the word is
unique).
l Type in ? halfway through a word to display valid completions.
l Type in back or b to return one level up in the prompt.
l Type in home or h to return to the root level.
l Use the Up and Down arrow keys to move back and forward in the command
history.
l Press CTRL +A to move to the beginning of the line.
l Press CTRL + E to move to the end of the line.
l Press CTRL + C to clear the line.

Commands Available at All CLI Levels

These commands are available at all hierarchy levels, except for the show network
command.

Table 3: Root Command Level Summary

Command Description
list sys-resource List of the system resources.
ping Verifies IP connectivity to a specified host IPv4
address.
ping6 Verifies IP connectivity to a specified host IPv6
address.
show show alarm-log Displays the alarm log content.
show alarms Displays the list of all active alarms.
show arp-entries Displays entries in the ARP cache table and the
Proxy ARP settings for the system.
show audit-log Displays teh audit log content. This command also
displays the time the activation timer and
validation timer is due to expire.
show conditions Retrieves the list of active conditions that are
currently raised against the system.
show configfile-status Displays status of a config file.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 26

Oscilloquartz: An ADVA Company Getting Started

Table 3: Root Command Level Summary

Command Description
show file-services-status Displays file transfer and system upgrade status.
(Available at all hierarchy levels.)
show ip-interface eth0 Displays the configuration of this IPv4 Interface.
show ip-routes Displays IPv4 routing table entries.
show ipv6-routes Displays the IPv6 routes in the routing table.
show ndp-entries Displays all NDP (Neighbor Discovery Protocol)
entries.
show network-element Displays the attributes associated with this
Network Element.
show ping-result Displays the result of the last ping request.
show running-config Displays the current running database
configuration.
show security-log Displays the security log content.
show subnetwork Displays the attributes associated with the
subnetwork entity.
show system Displays the system configuration parameters.
show time Display the system time and date.
show trace-route-result Displays the result of the last trace-route request.
trace-route Initiates a Traceroute request to a specified IPv4
Address.
trace-route6 Initiates a Traceroute request to a specified IPv6
Address.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 27

Oscilloquartz: An ADVA Company Getting Started

Equipment and Entity Identifier (EID)

Naming Conventions
Table 4: Equipment / Entity IDs
Expanded Commands
Entity ID Valid Entry Description
Name Used
10mhz- 10 MHZ Clock clk-ne-shelf-nte-n, Clock Port level Clock Port Entity
port-eid Port Entity where: ne=1, commands Identifier
Identifier shelf=1, nte=1 n=1-
show 10mhz-
2.
port
Example: clk-1-1-1-
1
acl-eid Access Control 1 through 10 configure (acl) Configure a new
List Entity Access Control
Identifier List entry.
access- Access Port access-ne-shelf-nte- Access Port level Access Port Entity
port-eid Entity Identifier n, commands Identifier.
Where:
show access-
ne=1, shelf=1,
port
nte=1, n=1-2.
Example: access-1-
1-1-1

activity-eid Syncjack Activity syncjack_schedule- add activity Syncjack Activity

Entity Identifier 1-1-1-n Entity Identifier.
delete activity
Where:
n = 1 to 255. show activity
Example: syncjack_
schedule-1-1-1-1
bc-eid Boundary Clock ptp_bc-1-n, add boundary- The Entity
Entity Identifier where n=1 clock Identifier of the
Boundary Clock.
Example: ptp_bc-1- delete
1 boundary-clock
show boundary-
clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 28

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
bits-in- BITS Port Entity bits_in-ne-shelf-nte- bits-line-type Building
port-eid Identifier bits, where: ne=1, Integrated
expected-ql
shelf=1, nte=1, Timing Supply
bits=1-2. frame-format (BITS) In Port
Example: bits_in-1- (bits) Entity Identifier.
1-1-1
sa-bit
show bits-in
bits-out- BITS Port Entity bits_out-ne-shelf- bits-line-type BITS Out Port
port-eid Identifier nteaux-bits, here: Entity Identifier.
frame-format
ne=1, shelf=1,
(bits)
nte=1, bits=1-2.
Example: bits_out- sa-bit
1-1-1-1
show bits-in
bitsx8_ BITSx8 Line Card bitsx8_group-ne- show bitsx8_
group-eid Group Entity shelf-nte-slot-group, group
Identifier Where: ne=1,
shelf=1, nte=1,
slot=2-3, group=1-2.
Example: bitsx8_
group-1-1-1-2-1
clkx16_ CLKx16 Line Card clkx16_group-ne- show clkx16_
group-eid Group Entity shelf-nte-slot-group, group
Identifier Where: ne=1,
shelf=1, nte=1,
slot=2-3, group=1.
Example: clkx16_
group-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 29

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
clock_ Clock Probe clock_probe-1-n; Configure Clock Clock Probe
probe-eid Entity Identifier where, n=1-2 Probe level Entity Identifier.
Example: clock_ commands
probe-1-1
add activity
add clock-probe
delete activity
delete clock-
probe
delete history-
result
show activity
show clock-
probe
clock_ Clock Probe clock_probe_result- Configure Clock
probe_ Result Entity 1-n-m Probe level
result-eid Identifier Where: commands
n = 1 (if SyncJack-
delete history-
extended-scaled
result
feature is disabled)
or 1-2 (if SyncJack- show history-
extended-scaled is result
enabled)
m = 1 to 16
Example: clock_
probe_result-1-1-1
ds-eid Dynamic Slave dynamic_slave-ne- delete dynamic- The Entity
Entity Identifier bc-mci-n; where: remote-slave Identifier of a
ne=1, bc/mc=1, Dynamic Remote
show dynamic-
mci=1, n=up to Slave.
remote-slave
1024.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 30

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
engine-id SNMP Engine Character string - 5 add usm-user A Simple
Identifier to 32 characters. Network
configure system
Enter ‘local’ for Local Management
Commands
Engine ID or full Protocol (SNMP)
remote Engine ID. show usm-user engine's
administratively-
unique identifier.
gps-eid GPS gps-ne-shelf-nte-n, add timeref The Entity
(GNSS) entity where: ne=1, Identifier of a
show gps-port
identifier shelf=1, nte=1, n=1. Global
Example: gps-1-1-1- Positioning
1 System (GPS)
Port.
ip-address IP Address Valid IP4 address. ip-address Internet Protocol
Example: (comms) (IP) address
10.10.12.15

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 31

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ip-eid IPv4 Entity eth0 and any other add arp-entry Configure IP
Identifier configured interface addresses to the
delete arp-entry
name. Address
Resolution
Protocol (ARP)
table.
add ip-route Add IP Entity
Identifier
associated with a
static IP route
entry.
dhcp-control Configure the
Dynamic Host
Configuration
Protocol (DHCP)
control
associated with
this IPv4
Interface.
dhcp-role Configure the
DHCP role
associated with
this IPv4
Interface.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 32

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ip-eid IPv4 Entity eth0 ip-address Configure the IP
(continued) Identifier (Continued) (comms) Address
(Continued) associated with
this IPv4
Interface.
netmask Configure the
Network Mask
associated with
this IpV4
Interface.
ping Delete an
existing IP
Address from the
ARP table.
show ip- Display the
interface eth0 configuration of
this IpV4
Interface.
linecard-eid Line card entity linecardtype-ne- delete eqpt
identifier shelf-nte-slot,
Where:
linecardtype=bits_
x16, clk_x16, pps_
x16, tod_pps_x16
ne=1, shelf=1,
nte=1, slot=2-3.
Example: bits_x16-1-
1-2
mc-eid Master Clock ptp_master_clock- add master- The Entity
Entity Identifier ne-n; clock Identifier of a
Where: ne=1, n=1-3. Master Clock.
delete master-
Example: ptp_
clock
master_clock-1-1
show master-
clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 33

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
mci-eid PTP Master ptp_ptp_mci-ne-mc- add mci The Entity
Clock Interface n. Identifier of a
delete mci
Entity Identifier Where: ne=1, Precision Time
bc/mc=1, n=1-416. show mci Protocol (PTP)
Example: ptp_ptp_ Master Clock
mci-1-1-1 Interface.
mgmt_tnl- Management mgmt_tnl- delete mgmttnl The Entity
eid Tunnel Entity mgmttnlNum, Identifier for a
show mgmttnl
Identifier Where: Management
mgmttnlNum=1- Tunnel.
255.
Example: mgmt_tnl-
34
mvp-eid Master Virtual master_virtual_port- add master- The Entity
Port Entity ne-bc/mc-mci-n. virtual-port Identifier of a
Identifier Where: ne=1, bc=1, Master Virtual
delete master-
mci=1-4, n=1. Port.
virtual-port
Example: master_
virtual_port-1-1-1- show master-
3 virtual-port
ne-eid Network ne-n, show network- The Entity
Element Entity Where: n=1. element Identifier of the
Identifier Example: ne-1 Network
Element.

nte-eid NTE Equipment nteosa5422-ne- show nte Network

Identifier shelf-n, Termination
Where: Equipment (NTE)
x=0 or 1 Equipment
ne=1, Identifier.
shelf=1,
n=1.
Example:
nteosa5422-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 34

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ocs_port- Ordinary Clock ocs_port-ne-shelf-ts- add ocs-port Ordinary Clock
eid Slave (OCS) n. Where: ne=1, Slave (OCS)
delete ocs-port
Entity Identifier shelf=1, ts=1, n=1. Entity Identifier.
Example: ocs_port- show ocs-port
1-1-1-1
pps-port- PPS Port Entity pps-ne-shelf-nte-n, PPS Port level Pulse Per Second
eid Identifier here: ne=1, shelf=1, commands (PPS) Port Entity
nte=1-2, n=1-2. Identifier.
show pps-port
Example: pps-1-1-1-
1
ppsx16_ PPSx16 Line Card ppsx16_group-ne- show ppsx16_ PPSx16 Line Card
group-eid Group Entity shelf-nte-slot-group, group Group Entity
Identifier Where: ne=1, Identifier
shelf=1, nte=1,
slot=2-3, group=1.
Example: ppsx16_
group-1-1-2-1
psu-eid PSU Equipment psu-ne-shelf-n, show psu Power Supply
Identifier Where: Unit Equipment
ne=1, shelf=1, n=1- Identifier.
2.
Example: psu-1-1-1
ptp_clock- PTP Clock Entity ptp_clock-1-n show ptp-clock Precision Time
eid Identifier Where: n=1 Protocol (PTP)
Example: ptp_clock- Clock Entity
1-1 Identifier

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 35

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ptp_clock_ PTP Clock Probe ptp_clock_probe-1-n Configure PTP PTP Clock Probe
probe- eid Entity Identifier where: Clock Probe level Entity Identifier.
n = 1-4 commands
Example: ptp_clock_
add activity
probe-1-1
add ptp-clock-
probe
delete activity
delete ptp-clock-
probe
show activity
show ptp-clock-
probe
ptp-clock_ PTP Clock Probe ptp_clock_probe- delete history- PTP Clock Probe
probe_ Result Entity result-1-n-m result Result Entity
result-eid Identifier Where: n = 1 to 2 Identifier
show history-
m = 1 to 16
result
Example: clock_
probe_result-1-1-1
ptp_fp-eid PTP Flow Point For Access Port: acc_ add master- PTP Flow Point
Entity Identifier ptp_flow_pt-ne- virtual-port Entity Identifier.
shelf-nte-port-n.
add ocs-port
Where: ne=1,
shelf=1, slot=1, add ptp-clock-
port=1, n=1-m (max probe
ptp flow points).
add ptp-fp
Example: acc_ptp_
flow_pt-1-1-1-3-1. delete ptp-fp
ptp-flowpoint
show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 36

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ptp_ PTP Network ptp_network_probe- Configure PTP PTP Network
network_ Probe Entity 1-n Network Probe Probe Entity
probe-eid Identifier Where: level commands Identifier.
n=1
add activity
Example: ptp_
network_probe-1-1 add ptp-
network-probe
delete activity
delete ptp-
network-probe
show activity
show ptp-
network-probe
ptp_port- PTP Port Entity ptp_port-1-m-n show ptp-port PTP Port Entity
eid Identifier Where: m=ptp clock Identifier.
number, n=1-max
ptp port number
Example: ptp_port-
1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 37

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
reference_ Reference port For Clock Probe, PTP add clock-probe Configure the
port-eid entity identifier Clock Probe, PTP reference EID of a
add ptp-clock-
Network Probe, and Clock Probe or
probe
Sync Reference: PTP Clock Probe.
reference,
available references,
reference-eid
see the OSA 5422
Operation and (referenceEid)
Provisioning Manual. add ptp- Configure the
network-probe reference EID of a
PTP Network
reference,
Probe.
reference-eid
(reference)
add syncref Configure the
reference EID of
the System
Synchronization
Entity.
shelf-eid Shelf Entity shelf-ne-shelf show shelf-info The Entity
Identifier Identifier of the
Where: ne=1
Shelf.
shelf=1
Example: shelf-1-1
slot-num Slot Number 1 show slot-info The Slot Number
where the
equipment is
located.
sooc-eid Slave Only sooc-ne-ts-n, Where: add sooc The Entity
Ordinary Clock ne=1, ts=1, n=1-2. Identifier of a
delete sooc
(SOOC) Entity Example: sooc-1-1- SOOC.
Identifier 1 show sooc

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 38

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
source-eid Source Entity For Clock Probe, add clock-probe Configure the
Identifier TOD & PPS Port, or source EID for a
source-eid
PPS Port 2: Clock Probe.
Available references, source-eid Configure the
see the OSA 5422 source EID for
Provisioning and PPS Port 2 or
Operations Manual. TOD & PPS Port.
srs-eid Static Remote static_slave-ne- add static- The Entity
Slave Entity mc/bc-mci-n; remote-slave Identifier of a
Identifier Where: ne=1,
delete static- Static Remote
mc/bc=1, mci=1,
remote-slave Slave.
n=1-4 or 1-16.
show static-
remote-slave
sync-eid System sync-ne-shelf-nte-n. show sync The entity
Synchronization Where: ne=1, identifier of the
Entity Identifier shelf=1,nte=1, n=1. system
Example: sync-1-1- synchronization.
1-1
syncref-eid System syncref-ne-shelf- clear-lockout The entity
Synchronization slotnumber-syncref identifier of the
clear-wtr
Reference Entity index, system
Identifier Where: delete syncref synchronization
ne=1, shelf=1, reference.
forced-switch
slotnumber=1
syncref index=1-2. lockout
Example: syncref-1-
1-1-1 priority
(sync/timeclock)
show sync-
available-refs
show syncref
sync-ref-alias

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 39

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
sys-eid System Entity the system identifier alias
Identifier of the element.
alarm-attributes
10mhz-port, 3g-dcn,
show alarm-
access-port, aux,
attributes
bits-in-port, bits-
out-port, bits-x16,
clk-x16, clock-probe,
dcn-port, irig-b, gps-
port, nci,
nteOSA 5422, ntp-
clock, pps-port, pps-
x16, psu, ptp-clock,
ptp-clock-probe,
ptp-mci, ptp-
network-probe, ptp-
port,
shelf-nteOSA 5422,
sooc, sync, system,
telecom-slave,
time-clock, time-of-
day-port, ge-4s, tod-
pps-x16.
timeclock- Time Clock time_clock-ne-shelf- add master- The entity
eid Entity Identifier nte-n; where: ne=1, clock identifier of a
shelf=1, nte=1, n=1. time clock.
add syncref
Example: time_
clock-1-1-1-1. show time-clock

source-eid

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 40

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
timeref-eid Time Reference timeref-eid-ne-shelf- add timeref The Entity
Entity Identifier nte-n, Identifier of a
clear-lockout
Where: ne=1, Time Clock
shelf=1, nte=1 clear-wtr Reference.
timeclock=1,
delete timeref
n=1-2.
Example: timeref-1- forced-switch
1-1-1-1
lockout
priority
(sync/timeclock)
show timeref
time-ref-alias
tod_port- Time of Day Port tod_port-eid-ne- show tod-port Time of Day
eid Entity Identifier shelf-nte-n, (TOD) & PPS Port
Where: ne=1, Entity Identifier
shelf=1,
nte=1
n=1.
Example: tod-1-1-1-
1
tod_source- Time of Day A TOD source can be source-eid Source of Time of
eid Source telecom slave, time Day (TOD).
clock, PTP clock.
Valid entry for
Telecom Slave: ts-
ne-n. Where: ne=1,
n=1. Example: ts-1-
1.
Valid entry for Time
Clock: time_clock-
ne-shelf-nte-n;
where: ne=1,
shelf=1, nte=1,
n=1.Example: time_
clock-1-1-1-1.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 41

Oscilloquartz: An ADVA Company Getting Started

Table 4: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ts-eid Telecom Slave ts-ne-n. add boundary- Telecom Slave
Entity Identifier Where: ne=1, clock (TS) Entity
n=1. Identifier.
add telecom-
Example: ts-1-1.
slave
delete telecom-
slave
show syncjack-
telecom-slave
show telecom-
slave
system-tod-ptp-
clk

Equipment and Entity Identifier (EID)

Naming Conventions
Table 5: Equipment / Entity IDs
Expanded Commands
Entity ID Valid Entry Description
Name Used
10mhz- 10 MHZ Clock clk-ne-shelf-nte-n, Clock Port level Clock Port Entity
port-eid Port Entity where: ne=1, commands Identifier
Identifier shelf=1, nte=1 n=1-
show 10mhz-
2.
port
Example: clk-1-1-1-
1
acl-eid Access Control 1 through 10 configure (acl) Configure a new
List Entity Access Control
Identifier List entry.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 42

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
access- Access Port access-ne-shelf-nte- Access Port level Access Port Entity
port-eid Entity Identifier n, commands Identifier.
Where:
show access-
ne=1, shelf=1,
port
nte=1, n=1-2.
Example: access-1-
1-1-1

activity-eid Syncjack Activity syncjack_schedule- add activity Syncjack Activity

Entity Identifier 1-1-1-n Entity Identifier.
delete activity
Where:
n = 1 to 255. show activity
Example: syncjack_
schedule-1-1-1-1
bc-eid Boundary Clock ptp_bc-1-n, add boundary- The Entity
Entity Identifier where n=1 clock Identifier of the
Boundary Clock.
Example: ptp_bc-1- delete
1 boundary-clock
show boundary-
clock
bits-in- BITS Port Entity bits_in-ne-shelf-nte- bits-line-type Building
port-eid Identifier bits, where: ne=1, Integrated
expected-ql
shelf=1, nte=1, Timing Supply
bits=1-2. frame-format (BITS) In Port
Example: bits_in-1- (bits) Entity Identifier.
1-1-1
sa-bit
show bits-in
bits-out- BITS Port Entity bits_out-ne-shelf- bits-line-type BITS Out Port
port-eid Identifier nteaux-bits, here: Entity Identifier.
frame-format
ne=1, shelf=1,
(bits)
nte=1, bits=1-2.
Example: bits_out- sa-bit
1-1-1-1
show bits-in

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 43

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
bitsx8_ BITSx8 Line Card bitsx8_group-ne- show bitsx8_
group-eid Group Entity shelf-nte-slot-group, group
Identifier Where: ne=1,
shelf=1, nte=1,
slot=2-3, group=1-2.
Example: bitsx8_
group-1-1-1-2-1
clkx16_ CLKx16 Line Card clkx16_group-ne- show clkx16_
group-eid Group Entity shelf-nte-slot-group, group
Identifier Where: ne=1,
shelf=1, nte=1,
slot=2-3, group=1.
Example: clkx16_
group-1-1-1
clock_ Clock Probe clock_probe-1-n; Configure Clock Clock Probe
probe-eid Entity Identifier where, n=1-2 Probe level Entity Identifier.
Example: clock_ commands
probe-1-1
add activity
add clock-probe
delete activity
delete clock-
probe
delete history-
result
show activity
show clock-
probe

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 44

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
clock_ Clock Probe clock_probe_result- Configure Clock
probe_ Result Entity 1-n-m Probe level
result-eid Identifier Where: commands
n = 1 (if SyncJack-
delete history-
extended-scaled
result
feature is disabled)
or 1-2 (if SyncJack- show history-
extended-scaled is result
enabled)
m = 1 to 16
Example: clock_
probe_result-1-1-1
ds-eid Dynamic Slave dynamic_slave-ne- delete dynamic- The Entity
Entity Identifier bc-mci-n; where: remote-slave Identifier of a
ne=1, bc/mc=1, Dynamic Remote
show dynamic-
mci=1, n=up to Slave.
remote-slave
1024.
engine-id SNMP Engine Character string - 5 add usm-user A Simple
Identifier to 32 characters. Network
configure system
Enter ‘local’ for Local Management
Commands
Engine ID or full Protocol (SNMP)
remote Engine ID. show usm-user engine's
administratively-
unique identifier.
gps-eid GPS gps-ne-shelf-nte-n, add timeref The Entity
(GNSS) entity where: ne=1, Identifier of a
show gps-port
identifier shelf=1, nte=1, n=1. Global
Example: gps-1-1-1- Positioning
1 System (GPS)
Port.
ip-address IP Address Valid IP4 address. ip-address Internet Protocol
Example: (comms) (IP) address
10.10.12.15

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 45

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ip-eid IPv4 Entity eth0 and any other add arp-entry Configure IP
Identifier configured interface addresses to the
delete arp-entry
name. Address
Resolution
Protocol (ARP)
table.
add ip-route Add IP Entity
Identifier
associated with a
static IP route
entry.
dhcp-control Configure the
Dynamic Host
Configuration
Protocol (DHCP)
control
associated with
this IPv4
Interface.
dhcp-role Configure the
DHCP role
associated with
this IPv4
Interface.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 46

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ip-eid IPv4 Entity eth0 ip-address Configure the IP
(continued) Identifier (Continued) (comms) Address
(Continued) associated with
this IPv4
Interface.
netmask Configure the
Network Mask
associated with
this IpV4
Interface.
ping Delete an
existing IP
Address from the
ARP table.
show ip- Display the
interface eth0 configuration of
this IpV4
Interface.
linecard-eid Line card entity linecardtype-ne- delete eqpt
identifier shelf-nte-slot,
Where:
linecardtype=bits_
x16, clk_x16, pps_
x16, tod_pps_x16
ne=1, shelf=1,
nte=1, slot=2-3.
Example: bits_x16-1-
1-2
mc-eid Master Clock ptp_master_clock- add master- The Entity
Entity Identifier ne-n; clock Identifier of a
Where: ne=1, n=1-3. Master Clock.
delete master-
Example: ptp_
clock
master_clock-1-1
show master-
clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 47

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
mci-eid PTP Master ptp_ptp_mci-ne-mc- add mci The Entity
Clock Interface n. Identifier of a
delete mci
Entity Identifier Where: ne=1, Precision Time
bc/mc=1, n=1-416. show mci Protocol (PTP)
Example: ptp_ptp_ Master Clock
mci-1-1-1 Interface.
mgmt_tnl- Management mgmt_tnl- delete mgmttnl The Entity
eid Tunnel Entity mgmttnlNum, Identifier for a
show mgmttnl
Identifier Where: Management
mgmttnlNum=1- Tunnel.
255.
Example: mgmt_tnl-
34
mvp-eid Master Virtual master_virtual_port- add master- The Entity
Port Entity ne-bc/mc-mci-n. virtual-port Identifier of a
Identifier Where: ne=1, bc=1, Master Virtual
delete master-
mci=1-4, n=1. Port.
virtual-port
Example: master_
virtual_port-1-1-1- show master-
3 virtual-port
ne-eid Network ne-n, show network- The Entity
Element Entity Where: n=1. element Identifier of the
Identifier Example: ne-1 Network
Element.

nte-eid NTE Equipment nteosa5422-ne- show nte Network

Identifier shelf-n, Termination
Where: Equipment (NTE)
x=0 or 1 Equipment
ne=1, Identifier.
shelf=1,
n=1.
Example:
nteosa5422-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 48

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ocs_port- Ordinary Clock ocs_port-ne-shelf-ts- add ocs-port Ordinary Clock
eid Slave (OCS) n. Where: ne=1, Slave (OCS)
delete ocs-port
Entity Identifier shelf=1, ts=1, n=1. Entity Identifier.
Example: ocs_port- show ocs-port
1-1-1-1
pps-port- PPS Port Entity pps-ne-shelf-nte-n, PPS Port level Pulse Per Second
eid Identifier here: ne=1, shelf=1, commands (PPS) Port Entity
nte=1-2, n=1-2. Identifier.
show pps-port
Example: pps-1-1-1-
1
ppsx16_ PPSx16 Line Card ppsx16_group-ne- show ppsx16_ PPSx16 Line Card
group-eid Group Entity shelf-nte-slot-group, group Group Entity
Identifier Where: ne=1, Identifier
shelf=1, nte=1,
slot=2-3, group=1.
Example: ppsx16_
group-1-1-2-1
psu-eid PSU Equipment psu-ne-shelf-n, show psu Power Supply
Identifier Where: Unit Equipment
ne=1, shelf=1, n=1- Identifier.
2.
Example: psu-1-1-1
ptp_clock- PTP Clock Entity ptp_clock-1-n show ptp-clock Precision Time
eid Identifier Where: n=1 Protocol (PTP)
Example: ptp_clock- Clock Entity
1-1 Identifier

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 49

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ptp_clock_ PTP Clock Probe ptp_clock_probe-1-n Configure PTP PTP Clock Probe
probe- eid Entity Identifier where: Clock Probe level Entity Identifier.
n = 1-4 commands
Example: ptp_clock_
add activity
probe-1-1
add ptp-clock-
probe
delete activity
delete ptp-clock-
probe
show activity
show ptp-clock-
probe
ptp-clock_ PTP Clock Probe ptp_clock_probe- delete history- PTP Clock Probe
probe_ Result Entity result-1-n-m result Result Entity
result-eid Identifier Where: n = 1 to 2 Identifier
show history-
m = 1 to 16
result
Example: clock_
probe_result-1-1-1
ptp_fp-eid PTP Flow Point For Access Port: acc_ add master- PTP Flow Point
Entity Identifier ptp_flow_pt-ne- virtual-port Entity Identifier.
shelf-nte-port-n.
add ocs-port
Where: ne=1,
shelf=1, slot=1, add ptp-clock-
port=1, n=1-m (max probe
ptp flow points).
add ptp-fp
Example: acc_ptp_
flow_pt-1-1-1-3-1. delete ptp-fp
ptp-flowpoint
show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 50

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ptp_ PTP Network ptp_network_probe- Configure PTP PTP Network
network_ Probe Entity 1-n Network Probe Probe Entity
probe-eid Identifier Where: level commands Identifier.
n=1
add activity
Example: ptp_
network_probe-1-1 add ptp-
network-probe
delete activity
delete ptp-
network-probe
show activity
show ptp-
network-probe
ptp_port- PTP Port Entity ptp_port-1-m-n show ptp-port PTP Port Entity
eid Identifier Where: m=ptp clock Identifier.
number, n=1-max
ptp port number
Example: ptp_port-
1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 51

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
reference_ Reference port For Clock Probe, PTP add clock-probe Configure the
port-eid entity identifier Clock Probe, PTP reference EID of a
add ptp-clock-
Network Probe, and Clock Probe or
probe
Sync Reference: PTP Clock Probe.
reference,
available references,
reference-eid
see the OSA 5422
Operation and (referenceEid)
Provisioning Manual. add ptp- Configure the
network-probe reference EID of a
PTP Network
reference,
Probe.
reference-eid
(reference)
add syncref Configure the
reference EID of
the System
Synchronization
Entity.
shelf-eid Shelf Entity shelf-ne-shelf show shelf-info The Entity
Identifier Identifier of the
Where: ne=1
Shelf.
shelf=1
Example: shelf-1-1
slot-num Slot Number 1 show slot-info The Slot Number
where the
equipment is
located.
sooc-eid Slave Only sooc-ne-ts-n, Where: add sooc The Entity
Ordinary Clock ne=1, ts=1, n=1-2. Identifier of a
delete sooc
(SOOC) Entity Example: sooc-1-1- SOOC.
Identifier 1 show sooc

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 52

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
source-eid Source Entity For Clock Probe, add clock-probe Configure the
Identifier TOD & PPS Port, or source EID for a
source-eid
PPS Port 2: Clock Probe.
Available references, source-eid Configure the
see the OSA 5422 source EID for
Provisioning and PPS Port 2 or
Operations Manual. TOD & PPS Port.
srs-eid Static Remote static_slave-ne- add static- The Entity
Slave Entity mc/bc-mci-n; remote-slave Identifier of a
Identifier Where: ne=1,
delete static- Static Remote
mc/bc=1, mci=1,
remote-slave Slave.
n=1-4 or 1-16.
show static-
remote-slave
sync-eid System sync-ne-shelf-nte-n. show sync The entity
Synchronization Where: ne=1, identifier of the
Entity Identifier shelf=1,nte=1, n=1. system
Example: sync-1-1- synchronization.
1-1
syncref-eid System syncref-ne-shelf- clear-lockout The entity
Synchronization slotnumber-syncref identifier of the
clear-wtr
Reference Entity index, system
Identifier Where: delete syncref synchronization
ne=1, shelf=1, reference.
forced-switch
slotnumber=1
syncref index=1-2. lockout
Example: syncref-1-
1-1-1 priority
(sync/timeclock)
show sync-
available-refs
show syncref
sync-ref-alias

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 53

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
sys-eid System Entity the system identifier alias
Identifier of the element.
alarm-attributes
10mhz-port, 3g-dcn,
show alarm-
access-port, aux,
attributes
bits-in-port, bits-
out-port, bits-x16,
clk-x16, clock-probe,
dcn-port, irig-b, gps-
port, nci,
nteOSA 5422, ntp-
clock, pps-port, pps-
x16, psu, ptp-clock,
ptp-clock-probe,
ptp-mci, ptp-
network-probe, ptp-
port,
shelf-nteOSA 5422,
sooc, sync, system,
telecom-slave,
time-clock, time-of-
day-port, ge-4s, tod-
pps-x16.
timeclock- Time Clock time_clock-ne-shelf- add master- The entity
eid Entity Identifier nte-n; where: ne=1, clock identifier of a
shelf=1, nte=1, n=1. time clock.
add syncref
Example: time_
clock-1-1-1-1. show time-clock

source-eid

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 54

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
timeref-eid Time Reference timeref-eid-ne-shelf- add timeref The Entity
Entity Identifier nte-n, Identifier of a
clear-lockout
Where: ne=1, Time Clock
shelf=1, nte=1 clear-wtr Reference.
timeclock=1,
delete timeref
n=1-2.
Example: timeref-1- forced-switch
1-1-1-1
lockout
priority
(sync/timeclock)
show timeref
time-ref-alias
tod_port- Time of Day Port tod_port-eid-ne- show tod-port Time of Day
eid Entity Identifier shelf-nte-n, (TOD) & PPS Port
Where: ne=1, Entity Identifier
shelf=1,
nte=1
n=1.
Example: tod-1-1-1-
1
tod_source- Time of Day A TOD source can be source-eid Source of Time of
eid Source telecom slave, time Day (TOD).
clock, PTP clock.
Valid entry for
Telecom Slave: ts-
ne-n. Where: ne=1,
n=1. Example: ts-1-
1.
Valid entry for Time
Clock: time_clock-
ne-shelf-nte-n;
where: ne=1,
shelf=1, nte=1,
n=1.Example: time_
clock-1-1-1-1.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 55

Oscilloquartz: An ADVA Company Getting Started

Table 5: Equipment / Entity IDs

Expanded Commands
Entity ID Valid Entry Description
Name Used
ts-eid Telecom Slave ts-ne-n. add boundary- Telecom Slave
Entity Identifier Where: ne=1, clock (TS) Entity
n=1. Identifier.
add telecom-
Example: ts-1-1.
slave
delete telecom-
slave
show syncjack-
telecom-slave
show telecom-
slave
system-tod-ptp-
clk

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 56

Overview of the CLI Structure
This table summarizes the major commands groups of the CLI and their sublevel commands
groups or commands.

Table 6: Root Command Groups

Root Lever Commands and Commands Groups
admin admin config-file, see admin config-file Commands
admin database, see admin database Commands
admin diagnostics, see admin diagnostics Commands
admin last-reset-cause, see admin last-reset-cause
Commands
admin sw-license, see admin sw-license Commands
admin upgrade, see admin upgrade Commands
configure configure communication, see configure communication
Commands
configure ntp, see configure ntp Commands
configure ptp, see
configure snmp, see configure snmp Commands
configure system, see configure system Commands
configure user-security, see configure user-security
Commands
network-element <ne-1> add eqpt
admin-state
configure, see network element configure Commands
contact
delete eqpt
location
name (ne, probe)
opr-lamptest
pm-interval
prompt

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 57

admin config-file Commands
You can create up to five configuration files using the save command. The configuration file
records the delta between the default database configuration and the current configuration
in the form of CLI commands with comments that detail the changes for each entity.

You cannot edit a configuration file directly on the device. You can transfer configuration
files to and from a remote server and edit the file on the remote server.

When editing a configuration file, verify that you maintain a proper

ADVA CLI command structure and that you mark the beginning of each
comment with the number sign (#).

Table 7: Admin Config-File Command Level Summary

Command Description
description (config-file) Adds a text description to the file.
list Lists existing configuration files, including the description.
load Executes the specified configuration file.
remove Deletes the specified configuration file.
restart-with-configfile Restarts the node and executes the specified configuration
file.
save Creates a configuration file (the delta between the current
configuration and the default database configuration).
show configfile Displays the contents of the specified configuration file.
show configfile-status Displays the last action related to the file and the status of
the action.
show file-services-status Displays the file transfer status.
show running-config Displays the current database configuration.
transfer-file Transfers a configuration file to or from a remote server
using FTP, SFTP, or SCP protocol.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 58

admin database Commands
To back up the database:

1. Create a backup of the system database using the backup-db command.

2. Transfer the database file from the system to a remote server via FTP, SFTP, or SCP
protocol using the transfer-file command.

To restore a database:

1. Transfer the database file from a remote server to the system via FTP, SFTP, or SCP
protocol using the transfer-file command.
2. Restore the database using the previous backup using the restore-bd command.
3. Activate the restored database using the activate-db command.

Figure 1: Database File Processes for CLI

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 59

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 8: Admin Database Command Level Summary

Command Description
activate-db Restarts the node using the restored database.
backup-db Creates a backup of the system database.
restore-db Installs a previous database backup.
show db-version Displays the database version.
show file-services-status Displays the system upgrade status. (Available at all
hierarchy levels.)
system-defaults db Saves, restores, or transfers a system-default database
file.
system-defaults value-file Transfers a system-default value file from a remote file
server.
transfer-file Transfers a database file for a backup/restore operation
using FTP, SFTP, or SCP protocols.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 60

Oscilloquartz: An ADVA Company Overview of the CLI Structure

admin diagnostics Commands

The basic diagnostic procedures for network communications are ping and trace-route.
After performing one or more diagnostics, you can save the results to a file and transfer to
another location.

Table 9: Admin Diagnostics Commands

Command Description
remove diag-file Deletes a diagnostic file
save diag-file Creates a diagnostic file.
show diag-file Displays a diagnostic file name.
transfer-file Transfers diagnostics file using FTP, SFTP, or SCP
protocol.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 61

Oscilloquartz: An ADVA Company Overview of the CLI Structure

admin last-reset-cause Commands

Use this command to get information about the last system reset, what caused the reset,
and if debug file is available. You can use the transfer-file to copy the debug file to another
location for analysis.

Table 10: Admin Last-Reset-Cause Commands

Command Description
show last-reset-info Displays the last cause for a system reset.
transfer-file Transfers a debug file using FTP, SFTP, or SCP protocol. .

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 62

Oscilloquartz: An ADVA Company Overview of the CLI Structure

admin sw-license Commands

Table 11: Admin SW-License Commands
Command Description
configure feature Enables or disables a license feature.
show all-features Displays the enable/disable status for all licenses.
show feature Displays the enable/disable status for the specified license.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 63

Oscilloquartz: An ADVA Company Overview of the CLI Structure

admin upgrade Commands

The software upgrade consists of three steps:

1. Transfer a software image to the device using the transfer-file command.

2. Install a new software onto a standby partition using the install command.
3. Activate the new software using the activate command.

Table 12: Admin Upgrade Commands

Command Description
activate Activates the new software immediately or at a specified date or
time, with or without validation.
cancel activation Cancels scheduled software upgrade activation or validation.
cancel validation- Software upgrade complete. Accept software load and cancel
timer validation timer.
install Installs new software onto standby partition.
revert to-standby Reverts to previous software version on standby side.
show audit-log Displays audit log content that includes the time the activation timer
and validation timer are due.
show file-services- Displays the system upgrade status.
status
show release- Display the Active/Standby release versions.
versions
transfer-file Transfer a software image to the node for software upgrade using
FTP, SFTP, or SCP protocol.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 64

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure communication Commands

The configure communication command includes these sublevel command groups:

l add
l configure
l delete
l show

To access the commands:

ADVA--> configure communication

ADVA:comms-->

Table 13: configure communication add commands

Command Description
add arp-entry Adds an IPv4 address to the ARP (Address Resolution
Protocol) table.
add ip-route Creates a static IPv4 route entry in the system routing table.
add ipv6-route Creates a static IPv6 route entry in the system routing table.
add mgmttnl Creates a management tunnel.
add ndp-entry Adds an IPv6 static neighbor entry.
add proxy-ndp Adds an IPv6 proxy neighbor entry.
configure src-addr Configures source dddress.
dhcp-ntp-server-control Enables or disables retrieving NTP server IP address on a
management DCN or management tunnel.
flush-arp-cache Clears all entries in the ARP cache table.
flush-ndp-cache Clears all entries in the NDP (Neighbor Discover Protocol)
cache table.
list mgmttnl Lists configured management tunnels.
Configure eth0 (DCN)
dhcp-client-id Sets DHCP client id for this interface.
dhcp-client-id-control Enables or disables sending DHCP client id for this interface.
dhcp-control Configures the DHCP control associated with this IPv4
Interface.
dhcp-role Configures the DHCP role associated with this IPv4 (eth0)
interface.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 65

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 13: configure communication add commands

Command Description
dhcpv6-control Enables or disables DHCP version 6 on an IPv6 interface.
ip-address (comms) Configures the IP address associated with this IPv4 interface.
ip-mode Configures the IP versions to be supported on a management
DCN.
ipv6-sys-def-gateway Configure the IPv6 System Default Gateway IP address.
ipv6-unicast-addr Manually configure the IPv6 Unicast address of the
Management DCN.
netmask Configures the network mask associated with this IPv4
interface.
prefix-length Manually configures the IPv6 unicast address prefix length of
a management DCN.
rip2Pkts-control Enables or disables RIPv2 protocol for a management
interface or tunnel.
rip-ng-control Enables or disables routing information protocol next
generation (RIPng) packets on a management DCN
sys-def-gateway Configures the system default gateway IP address.
Configure Management Tunnel
buffer-size Sets the buffer size of a management tunnel.
cir Sets the committed information rate of a management
tunnel.
cos Selects the class of service for a management tunnel.
dhcp-client-id Sets DHCP client id for this interface.
dhcp-client-id-control Enables or disables sending DHCP client id for this interface.
dhcp-control Configures the DHCP control associated with this IPv4
interface.
eir Sets the excess information rate for a management tunnel.
ip-address (comms) Configures the IP address associated with this IPv4 interface.
netmask Configures the network mask associated with this IPv4
interface.
rip2Pkts-control Enables or disables RIPv2 protocol for a management
interface or tunnel.
show mgmttnl Displays configuration for a management tunnel.
svlan-control Enables or disables S-tag VLAN control on a management
tunnel.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 66

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 13: configure communication add commands

Command Description
svlan-id Configurse the S-tag VLAN ID of a management tunnel.
sys-def-gateway Configures the system default gateway IP address.
vlan-id Configures the VLAN ID of a management tunnel.

Table 14: configure communication delete commands

Command Description
delete arp-entry Deletes an IP address from the ARP table.
delete ip-route Deletes an IPv4 route from the routing table.
delete ipv6-route Deletes an IPv6 static route from the routing table.
delete mgmttnl Deletes a management tunnel.
delete ndp-entry Deletes an IPv6 static neighbor entry.

Table 15: configure communication show commands

Command Description
show arp-entries Displays entries in the ARP cache table and the proxy ARP settings for
the system.
show eth0 Displays the configuration of this IPv4/IPv6 management LAN
interface.
show ip-interface Displays the IPv4 (eth0) ip-interface configuration.
eth0
show ip-routes Displays IPv4 routing table entries.
show ipv6-routes Displays IPv6 routing table entries.
show mgmttnl Displays the configuration of this IPv4 interface.
show src-address Displays the configured NTEsource IP address.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 67

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure ptp Commands

The configure PTP command enable you to provision PTP. To access the commands, drill
down to the network-element ne-1:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1-->

Table 16: Configure PTP Commands

Command Description
add boundary-clock Creates a Boundary Clock (BC).
add master-clock Creates a Master Clock (MC).
add ptp-clock Creates a PTP Clock.
add telecom-slave Creates a Telecom Slave (TS).
configure boundry-clock Configures boundary clock settings.
configure master-clock Configures master clock settings.
configure ptp-clock Configures PTP clock settings.
configure telecom-slave Configure telecom slave settings.
delete boundary-clock Deletes an existing boundary clock.
delete master-clock Deletes an existing master clock.
delete ptp-clock Deletes an existing ptp-clock
delete telecom-slave Deletes an existing telecom slave.

Additional configuration commands are available for each PTP element:

Configure Boundary Clock Commands

Table 17: Configure Boundary-Clock Commands
Command Description
add mci Adds a Master Clock Interface entity.
admin-state Sets the administration state of the specified entity.
alias Edits the alias for this entity.
delete mci Deletes an existing Master Clock Interface.
show boundary-clock Display Boundary Clock configuration.
show mci Display Master Clock Interface configuration.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 68

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Configure Master Clock Commands

Table 18: Configure Master-Clock Commands
Command Description
add mci Adds a Master Clock Interface entity.
admin-state Sets the administration state of the specified entity.
alias Edits the alias for this entity.
configuer mci Sets Master Clock Interface settings.
delete mci Deletes an existing Master Clock Interface.
show boundary-clock Display Boundary Clock configuration.
priority1 Sets Master Clock priority 1.
priority2 Sets Master Clock priority 2.

Configure NTE Commands

Table 19: Configure NTE Commands
Command Description
configure access-port Sets PTP entities in the access port

Table 20: Configure Access Port Commands

Command Description
add ptp-fp Creates a new PTP flow point on an access or network port.
delay-assymetry Set the port's Delay Asymmetry value.
delete ptp-fp Deletes an existing PTP flow point.
freq-source Selects a frequency source
show access-port Displays the access port configuration.
show ptp-fp Displays the configuration of the PTP flow point.

Table 21: Configure PTP Flow Point Commands

Command Description
admin-state Sets the administration sate of the element.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 69

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 21: Configure PTP Flow Point Commands

Command Description
alias Edits the alias of the element.
buffer-size Sets the buffer size of a management tunnel or PTP flow point.
freq-source Selects a frequency source
cir Configures the CIR (Committed Information Rate) for a management
tunnel or PTP flow point.
cos Select the class of service for a management tunnel.
eir Set the EIR (Excess Information Rate) for a management tunnel or PTP-FP.
inner<n>- Sets the vlann ethertype a PTP flow point.
ethertype
inner<n>- The VLAN tag associated with the associated PTP flow point.
untagged
inner<n>-vlan- Sets the inner vlan list for a PTP Flow Point.
list
outer- Set the Outer Tag Ethertype for an Access or Network Port or PTP flow
ethertype point.
outer- Enable or disable untagged outer VLANs associated with a PTP flowpoint.
untagged
outer-vlan-list Sets the inner vlan list for a PTP Flow Point.
show perf-mon Display the designated Performance Monitoring (PM) data for the Port or
Flow.
show ptp-fp Display the configuration of a PTP Flow Point.

Configure PTP Clock Commands

Table 22: Configure PTP Clock Commands
Command Description
add ptp-port Creates a PTP port.
add l3-ptp-port Creates an L3 PTP port when the PTP clock profile is G8275.2.
admin-state Sets the administration state of the element.
alias Edits the alias name of the element.
assumed-ql Sets the assumed quality level for a Sync-E interface.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 70

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 22: Configure PTP Clock Commands

Command Description
delete ptp-port Deletes an existing PTP port.
expected-ql Sets the expected quality level of the interface.
localpriority Sets the PTP clock local priority.
priority1 Sets PTP clock priority 1.
priority2 Sets PTP clock priority 2.
show ptp-clock Displays PTP clock configuration.
show ptp-port Displays PTP port configuration.
show l3-ptp-port Displays L3 PTP port configuration.

Table 23: Configure PTP Port Commands

Command Description
admin-state Sets the administration state of the element.
alias Edits the alias name of the element.
announce- Configures the announce receipt timeout in seconds.
receipt-timeout
delay-asym- Sets the delay asymmetry compensation mode for PTP G8275.1
comp-mode boundary or slave clock.
delay-asym- Sets the delay asymmetry compensation value. Available when delay-
comp-val asym-comp-mode is set to manual.
delay-response- Configures the delay resp timeout in seconds.
timeout
local-priority Sets the PTP clock local priority.
min-exp-clk-cls Configure the Minimum Expected Clock Class, which sets the minimum
threshold for receiving packets.
show ptp-port Displays PTP port configuration.
sync-receipt- Configure the sync receipt timeout in seconds
timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 71

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 24: Configure L3 PTP Port Commands

Command Description
admin-state Sets the administration state of the element.
alias Edits the alias name of the element.
announce-receipt- Configures the announce receipt timeout.
timeout Valid values: 2 to 255.
delay-asym-comp- Sets the delay asymmetry compensation mode for PTP port.
mode
delay-asym-comp-val Sets the delay asymmetry compensation value. Available when
delay-asym-comp-mode is set to manual.
delay-resp-receipt- Sets the delay response receipt timout.
timeout Valid values 2 to 255.
expected-clock-class Sets the maximum clock class.
Valid values: 0 to 255. Default is 247.
ip-priority Sets the IP packets priority mode. Valid values when:

l ip-priority-map-mode is set to dcsp 0 to 63.

l ip-priority-map-mode is set to tos 0 to 7.
ip-priority-map-mode Sets the IP packets priority mode.
Valid values: none, dscp, tos. Default is none.
local-priority Sets the PTP clock local priority.
master-lease-duration Enter the applicable value in seconds.
Valid values: 60 to 1,000 seconds. Default is 300 seconds.
show ptp-port Displays PTP port configuration.
sync-receipt-timeout Configures the Sync message receipt timeout.
unicast-restart-timer Sets the next restart of request unicast transmission signaling
messages.
Valid values: 30 to 1,800 seconds. Default is 1 second.
unicast-timeout Sets the next restart of request unicast transmission signaling
messages.
Valid values: 1 to 600 seconds. Default is 1 second.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 72

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Configure Telecom Slave Commands

Command Description
add sooc Creates a slave ony ordinary clock (SOOC).
admin-state Sets the administrative state of the element.
alias Edits the alias name of the element.
assumed-ql Sets the assumed quality levle of a Sync-E interface.
clock- Sets the clock recovery mode.
recovery-
mode
delete sooc Deletes a slave only ordinary clock (SOOC).
expected-ql Sets the expected quality level for the interface.
min-exp-clk- Configures the Minimum Expected Clock Class, which sets the minimum
cls threshold for receiving packets.
ql-mode Enables or disables quality level sync status messaging.
show sooc Displays the configuration of a SOOC.
show telecom- Displays the configuration of the telecom slave.
slave
sync-id Configures the synchronization domain.
sync-ref-mode Enables or disables the use of this telecom slave as a sync reference.

Table 25: Configure OCS Port Commands

Command Description
alias Edits the alias name of the element.
show ocs-port Displays the configuration of the OCS port.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 73

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure ntp Commands

The configure NTP command enable you to provision NTP. To access the commands, you
need to drill down to the network-element ne-1:

ADVA--> configure ntp

ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1-->

Table 26: Configure NTP Commands

Command Description
add ntp-clock Creates an NTP clock.
configure nte Configures nte settings.
configure ntp-clock Access to NTP clock configuration commands.
delete ntp-clock Deletes an existing NTP clock element.
show ntp-clock Displays NTP clock configuration.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 74

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure snmp Commands

This table displays a summary of the Configure SNMP level commands. To access the
commands:

ADVA--> configure snmp

ADVA:snmp-->

Table 27: Configure SNMP Commands

Command Description
add community Create a new SNMPv1/v2c Community Entry.
add target-address Create a new Target Address Entry.
add target-params Create a new Target Parameters Entry.
add usm-user Create a new USM User.
configure usm-user-auth- Configure a USM user authentication key.
key
configure usm-user-priv- Configure a USM user privacy key.
key
delete community Delete an existing SNMPv1/v2c Community Entry.
delete target-address Delete an existing Target Address Entry.
delete target-params Delete an existing Target Parameters Entry.
delete usm-user Delete an existing USM User.
show all-communities Display the list of SNMPv1 and SNMPv2c Community Entry
instances.
show all-notify-entries Display the list of Notify Entry instances.
show all-target-addresses Display the list of traphost Target Address Entry instances.
show all-target-params Display the list of Target Parameter Entry instances.
show all-usm-users Display all of the USM users.
show community Display the community entry for the specified Community
Name.
show notify-entry Display the notify entry for the specified Notify Name.
show target-address Display the traphost Target Address entry.
show target-params Display the target parameter entry for the specified
Parameters Name.
show usm-user Display the USM user configuration parameters.
snmp-dying-gasp Enable or disable SNMP Dying Gasp function.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 75

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure system Commands

The configure system command enable you to configure the OSA 5422 system options.

ADVA--> configure system

ADVA:system-->

Table 28: Configure System Commands

Command Description
acl-entry (acl-#) Enters the access control lists submenu. See ACL-Entry
Submenu Commands.
alarm-attributes Configures severity level of an alarm condition. Type Tab or
? to display a list of available system elements.
alarm-log Enters the alarm-log submenu. See Alarm Log Submenu
Commands.
audit-log Enters the audit-log submenu. See Audit Log Submenu
Commands.
auth-traps Enables or disables SNMP authentication traps.
autoprove mode Sets the automatic provisioning or automatic discovery
mode for the system.
clock set date-time Sets the local date or time.
clock set time Sets the local time.
ftp Enables or disables FTP protocol.
http Enables or disables HTTP protocol.
https Enables or disables HTTPS protocol.
icmpv4 Enters the ICMPV4 submenu. See ICMPV4 Submenu
Commands.
icmpv6 Enters the ICMPV6 submenu. See ICMPV6 Submenu
Commands.
ipv4-traffic-acl-entry Configures access control lists options. See IPv4 Traffic
ACL Entry Submenu Commands.
ipv6-fwd Enables or disables IPv6 forwarding.
ipv6-traffic-acl-entry Configures access control lists options. See IPv6 Traffic
ACL Entry Submenu Commands.
mgmt-traffic-bridge Enables or disables management traffic bridging.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 76

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 28: Configure System Commands

Command Description
mgmt-traffic-bridge-security Enables or disables management traffic bridging security.
ntp-client Enters system-level NTP client submenu. See NTP Client
Submenu Commands.
prompt Defines the CLI system-level prompt.
proxy-arp Enables or disables proxy ARP.
proxy-ndp Enables or disables proxy NDP.
scp Enables or disables SCP protocol.
security-banner Configures the security banner
security-log Enters the system security log submenu. See Security Log
Subment Commands.
security-prompt Enables or disables the CLI security prompt.
serial Enables or disables serial interface.
serial-disconnect-logoff Sets automatic log off when the serial port disconnects.
sftp Enables or disables secure FTP protocol.
snmp-engine-id Changes or displays the user system engine ID.
ssh Enables or disables SSH protocol.
syslog-server Enters the syslog submenu commands. See Syslog Server
Submenu Commands.
syslog-timestamp-format Sets the syslog time stamp format.
system-tod-ptp-clk Sets the ToD source for the system when the system ToD
source type is PTP.
system-tod-type Changes the system ToD source type.
telnet Enables or disables Telnet protocol.
test-alarm Enables to test all alarms for an entity.
time-zone Enters time zone submenu. See Time Zone Submenu
Commands.

Additional configuration commands are available for these elements:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 77

Oscilloquartz: An ADVA Company Overview of the CLI Structure

ACL-Entry Submenu Commands

Table 29: acl-entry Commands
Command Description
configure permit Sets the filter action to permit.
control Enables or disables this ACL entry.

Alarm Log Submenu Commands

Table 30: alarm-log Commands
Command Description
log2file-control Enables or disables logging the alarm log entries to a local
file.
syslog-control Enables or disables logging the alarm log entries to syslog.
transfer-file Initiates file transfer of the alarm log to or from a remote
server using FTP, SFTP, orSCP protocol.
show alarm-log-config Displays the alarm log configuration.
show alarm-log Displays the alarm log content.

Audit Log Submenu Commands

Table 31: audit-log Commands
Command Description
log2file-control Enables or disables logging the audit log entries to a local file.
syslog-control Enables or disables logging the audit log entries to syslog.
transfer-file Initiates file transfer of the audit log to or from a remote
server using FTP, SFTP, orSCP protocol.
show audit-log-config Displays the audit log configuration.
show audit-log Displays the audit log content.

ICMPV4 Submenu Commands

Table 32: icmpv4 Commands
Command Description
icmpv4-filter Enables or disables the ICMPv4 Filter.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 78

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 32: icmpv4 Commands

Command Description
drop-echo- Enables (accept) or disables (block) echo requests for
requests ICMPv4/ICMPv6 packets.

ICMPV6 Submenu Commands

Table 33: icmpv6 Commands
Command Description
icmpv6-filter Enables or disables the ICMPv6 Filter options.
drop-echo- Enables (accept) or disables (block) echo requests for
requests ICMPv4/ICMPv6 packets.
drop-neighbor- Enables (accept) or disables (block) neighbor advertisement requests
advertisement for ICMPv6 packets.
drop-neighbor- Enables (accept) or disables (block) neighbor solicitation requests for
solicitation ICMPv6 packets.
drop-router- Define whether to accept or block router advertisement requests for
advertisement ICMPv6 packets.
drop-router- Enables (accept) or disables (block) router solicitation requests for
solicitation ICMPv6 packets.

IPv4 Traffic ACL Entry Submenu Commands

Table 34: ipv4-traffice-acl-entry Commands
Command Description
configure permit ipv4 Configures a new IPv4 traffice ACL entry.
control Enables or disables the selected IPv4 traffice ACL entry.
show ipv4-traffic-acl-entry Displays the configuration of this IPv4 ACL entry.

IPv6 Traffic ACL Entry Submenu Commands

Table 35: ipv6-traffice-acl-entry Commands
Command Description
configure permit ipv6 Configures a new IPv6 traffice ACL entry.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 79

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 35: ipv6-traffice-acl-entry Commands

Command Description
control Enables or disables the selected IPv6 traffice ACL entry.
show ipv6-traffice-acl-entry Displays the configuration of this IPv6 ACL entry.

NTP Client Submenu Commands

Table 36: ntp-client Commands
Command Description
backup-server Configures the IP address of the NTP backup server.
control Enables or disables the NTP client.
polling-interval Configures the polling interval in seconds.
primary-server Configures the IP address of the NTP primary server.
show ntp-client Displays the NTP client configuration parameters.
switch-server primary Switches to the primary NTP server.
switch-server secondary Switches to the backup NTP server.

Security Log Subment Commands

Table 37: security-log Commands
Command Description
show security-log Displays the content of the security log. Available at all levels.
show sec-log-config Displays the security log-configuration.
syslog-control Enables or disables logging of security events to the syslog
server.
transfer-file ftp/scp/sftp Initiates a file transfer to or from a remote server using FTP,
SFTP, or SCP protocols.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 80

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Syslog Server Submenu Commands

Table 38: syslog-server Commands
Command Description
syslog-server (#) Enters the syslog sever identifier.
configure ip-version Configures the IP protocol version to access the syslog server.
configure ipv4-address Configures the IPv4 address and port to access the syslog
server.
configure ipv6-address Configures the IPv6 address and port to access the syslog
server.
show syslog-server Displays the configuration of the selected syslog server.

Time Zone Submenu Commands

Table 39: time-zone Commands
Command Description
dst-control Enable or disable configuring the Daylight Saving Time.
dst-end-day Configure the day in a month when the Daylight Saving Time ends.
dst-end-month Configure the month in a year when the Daylight Saving Time ends.
dst-end-time Configure the time in a day when the Daylight Saving Time ends.
dst-start-day Configure the day in a month when the Daylight Saving Time starts.
dst-start-month Configure the month in a year when the Daylight Saving Time starts.
dst-start-time Configure the time in a day when the Daylight Saving Time starts.
dst-utc-offset Configure the offset of Daylight Saving Time from Coordinated
Universal Time.
show time-zone View the time zone configuration.
time-zone-name Configures a name for the time zone.
utc-offset Configure the offset of the system time from the Coordinated
Universal Time.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 81

Oscilloquartz: An ADVA Company Overview of the CLI Structure

configure user-security Commands

This section presents a summary of the configure user-security commands. The configure
user-security commands also include commands to configure a RAP (Remote
Authentication Server) and commands to configure an SSL certificate.

Table 40: Configure User Security Command Level Summary

Command Description
Configure User Security
access-order Changes the precedence of the authentication mechanisms available
on the system.
accounting Enables or disables RADIUS accounting.
add <user-id> Adds a new local Security User.
auth-protocol Edits the configured Remote Authentication Protocol.
auth-type Changes the protocol type used for the Remote Authentication
Protocol.
config-ssl-strength Configures the SSL cipher strength.
config-user <user- Enables or disables paging mode for this particular user.
id> cli-paging
config-user <user- Changes the comment associated with a user.
id> comment
config-user <user- Changes the inactivity timeout for a user.
id> login-timeout
config-user <user- Changes the password of this user.
id> password
config-user <user- Change the privilege level of this user.
id> priv-level
delete <user-id> Deletes an existing local user profile.
log-anonyme- Sets the logging anonymization interval.
interval
nas-ip-address Sets the IPv4 address of the Network Access Server when the
Remote Authentication Protocol is set to radius.
nas-ipv6-address Sets the IPv6 address of the Network Access Server when the
Remote Authentication Protocol is set to radius.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 82

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 40: Configure User Security Command Level Summary

Command Description
regenerate-ssh- Regenerates the SSH security keys for User Security.
keys
regenerate-ssl- Regenerates the SSL Certificate for User Security.
certificate
security-strength Sets the Security Strength setting for User Security.
security-trap-type Configures the security trap type for User Security.
show active-ssl- Displays the active SSL Certificate.
certificate
show all-users Displays a list all users.
show local-user Displays the configuration parameters for this local user.
show provisioned- Displays the provisioned SSL Certificate.
ssl-certificate
show remote-user Displays the configuration parameters for this remote user.
show security- Displays the configuration parameters for this Security System.
system
tacacs-privilege- Enables or Disables TACACS privilege control.
control
tacacs-user- Default privilege level when TACACS control is disabled.
privilege
unlock-user Unlocks a user account.
Remote Authentication Server (config-rap)
accounting-port This is used for selecting the accounting port number.
control Enables or disables this Remote Authentication Server.
ip-address (rap) Configures the IPv4 address for this Remote Authentication Server
entry.
ip-version (rap) Configure the IP version of a Remote Authentication Server.
ipv6-address (rap) Configure the IPv6 address for this Remote Authentication Server
entry.
order Configures the search order for the Remote Authentication Servers.
port Configures the Port for this Remote Authentication Server entry.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 83

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 40: Configure User Security Command Level Summary

Command Description
retries Configures the number of retries that will be attempted for particular
security access request to this Remote Authentication Server.
secret Configures the secret password for Remote Authentication Server
requests.
show rap-server Displays the configuration parameters for this Remote
Authentication Server.
timeout Configures the timeout value for timing out a security access request
to this Remote Authentication Server.
SSL Certificate
country Set Country for SSL Certificate.
email Setting for SSL Certificate.
locality Setting for SSL Certificate.
name (user) Set name for SSL Certificate.
organization Setting for SSL Certificate.
organization-unit Setting for SSL Certificate.
show active-ssl- Display the active SSL Certificate.
certificate
show provisioned- Display the provisioned SSL Certificate.
ssl-certificate
state Setting for state name for a provisioned SSL Certificate.
valid-until Setting for the valid-until date for a provisioned SSL Certificate.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 84

Oscilloquartz: An ADVA Company Overview of the CLI Structure

network element configure Commands

Via the network-element ne-1 configure command you can configure these elements:

l bits-x16
l clk-x16
l ge-4s
l irig-b
l nte
l pps-x16
l psu
l sync
l syncjack
l time-clock
l tod-pps-x16
l display-card
l clk-x4-lpn

To access the network-element configure commands:

ADVA--> network-element ne-1

ADVA-NE-1-->configure

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 85

Oscilloquartz: An ADVA Company Overview of the CLI Structure

network-element ne-1 configure bits-x16

Commands
Table 41: network-element ne-1 configure bits-x16 commands
Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.
configure bitsx8_group Access the bits group configuration options.
bits-active-ports Sets the active ports of the group.
bits-clock-ports Sets the clock signal ports.
bits-line-impedence Sets the line impedance of the group.
bits-line-type Sets the group line type.

network-element ne-1 configure clk-x16

Commands
ADVA-NE-1--> configure clk-x16

Table 42: network-element ne-1 configure clk-x16 commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.
configure clkx16_group Access the clock group configuration commands.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 86

Oscilloquartz: An ADVA Company Overview of the CLI Structure

network-element ne-1 configure ge-4s Commands

ADVA--> network-element ne-1
ADVA-NE-1--> configure ge-s4 ge-s4-1-1-1

Table 43: network-element ne-1 configure ge-4s commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.
configure access-port Configures the card access ports properties.

network-element ne-1 configure irig-b Commands

ADVA-NE-1--> configure irig-b irig_b-1-1-3
ADVA-NE-1:irig_b-1-1-3-->

Table 44: network-element ne-1 configure irig-b commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.
configure irig-group Access the card group configuration commands.
configure irig-opt Access the card optical port configuration commands.
configure irig-out Access the card outputs ports configuration commands.
configure irig-relay Access the card relay port configuration commands.
configure irig-rs422 Access the card RS422 port configuration commands

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 87

Oscilloquartz: An ADVA Company Overview of the CLI Structure

network-element ne-1 configure nte Commands

ADVA-NE-1--> configure nte nteosa5421-1-1-1
ADVA-NE-1:nteosa5421-1-1-1-->

Table 45: network-element ne-1 configure nte commands

Command Description
admin-state Sets the administration state associated with the specified
element.
alias Configures an alias for this element.
configure 10mhz-port Access to the 10 Mhz configuration commands.
configure access-port Access to the access ports configuration commands.
configure bits-in Access to the BITS-In port configuration commands.
configure bits-out Access to the BITS-Out ports configuration commands.
configure dcn Access to the DCN port configuration commands.
configure gps-port Access to the GNSS port configuration commands.
configure network-port Access to the network port configuration commands.
configure pps-port Access to the PPS port configuration commands.
configure tod-port Access to TOD & PPS port configuration commands.
configure usb-port Access to the usb port configuration commands.
reboot Reboots the NTE card.
snmp-dying-gasp Enables or disables SNMP dying gasp function.

network-element ne-1 configure psu Commands

ADVA-NE-1--> configure psu psu-1-1-1
ADVA-NE-1:psu-1-1-1-->

Table 46: network-element ne-1 configure psu commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.

network-element ne-1 configure sync Commands

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1-->

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 88

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 47: network-element ne-1 configure sync commands

Command Description
add syncref Creates a new sync reference element.
admin-state Sets the admin state of this element.
clear Removes any manual switch opertaion.
clear-lockout syncref-EID Removes lockout request.
clear-wtr syncref-EID Clears the Wait Tot Restore time.
clock-pll-bw eec Sets the clock PLL bandwidth.
delete syncref syncref-EID Deletes the sync reference element.
forced-switch syncref-EID Initiates a forced switch.
lockout syncref-EID Initiates a lockout.
manual-switch syncref-EID Initiates a manual sync reference switch.
network-clock-type Sets the clock type.
selection-mode Sets the selection mode.
sync-alias Sets an alias for the sync element.
sync-ref-alias Sets an alias for the sync reference element.
wtr-time Sets the wait to restore time in minutes.

network-element ne-1 configure syncjack

Commands
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack-->

Table 48: network-element ne-1 configure syncjack commands

Command Description
configure clock-accuracy Access to clock probe configuration commands.
configure clock-analysis Access to PTP clock probe configuration commands.
configure ptp-network-analysis Access to PTP network probe configuration commands.
configure raw-data-collection Access to raw data collection server.
configure syncjack-schedule Access to Syncjack schedule configuration commands.
configure user-mtie-mask Access to customized MTIE mask configuration
commands.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 89

Oscilloquartz: An ADVA Company Overview of the CLI Structure

network-element ne-1 configure time-clock

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1-->

Table 49: network-element ne-1 configure time-clock commands

Command Description
add timeref Adds a time reference
admin-state Sets the admin state of this element.
clear Clears a forced switch request.
clear-lockout Clears a lockout request.
clear-wtr Clears wait to restore time.
comp-clock-output-adjustment Sets the time clock output adjustment.
delete timeref Deletes a time reference.
e-Prtc-Mode Enables or disables e-PRTC mode.
expected-ql Selects the expected quality level.
forced-switch Sets a forced switch.
lockout Sets a lockout.
priority Sets the time reference priority.
selection-mode Selects the time clock selection mode.
sync-ref-candidate Enables or disables the time clock as a sync reference
input.
time-clock-alias Modifies the time clock alias.
time-holdover-performance Sets the time holdover performance for this element.
time-ref-alias Sets the time reference alias.
time-scale Selects the time scale.
wtr-time Sets the time clock wait to restore time.

network-element ne-1 configure tod-pps-x16

Commands
ADVA-NE-1--> configure tod-pps-x16 tod_pps_x16-1-1-1
ADVA-NE-1:tod_pps_x16-1-1-1-->

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 90

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Table 50: network-element ne-1 configure tod-pps-x16 commands

Command Description
admin-state Sets the admin state of this element.
configure tod_pps_x16_ Enters the configuration options for the tod-pps-x16 group
group ports.

network-element ne-1 configure disaply-card

Commands
ADVA-NE-1--> configure display-card display_card-1-1-1
ADVA-NE-1:display_card-1-1-1-->

Table 51: network-element ne-1 configure disaply-card commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.

network-element ne-1 configure clk-x4-lpn

Commands
ADVA-NE-1--> configure clk-x4-lpn clk_x4_lpn-1-1-2
ADVA-NE-1:clk_x4_lpn-1-1-2-->

Table 52: network-element ne-1 configure clk-x4-lpn commands

Command Description
admin-state Sets the admin state of this element.
alias Sets the alias for this element.
configure clk-x4-port-group Access to configure LPN clock group commands.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 91

Oscilloquartz: An ADVA Company Overview of the CLI Structure

Alarms and Conditions

See the OSA 5422 Provisioning and Operations Manual for monitored types and default TCA
(Threshold Crossing Alert) settings and troubleshooting procedures.

Commands applicable to alarm condition provisioning and retrieval are:

l alarm-attributes
l show alarm-attributes
l show alarms
l show conditions

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 92

 Chapter 3

Commands Reference
This chapter contains CLI commands reference including options and rules.

The command are listed in alphabetical order. Not all commands or all options detailed
within a command apply to every possible configuration. Some commands are context-
sensitive, and the system presents options based on previous options you selected.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 93

activate
Activate the new software at a specified date, time or immediately - with or without
enabling the validation timer. Step three of the software upgrade procedure.

The three step software upgrade feature utilizes the following commands:

1. Transfer software image to the NE using the transfer-file command.

2. Install new Software into Standby partition using the install command.
3. Activate the new Software using the activate command.

Command Level
Admin Upgrade

Syntax
activate date <date> <time> enabled <timer>
activate date <date> <time> disabled
activate now enabled <timer>
activate now disabled
activate time <time> enabled <timer>
activate time <time> disabled

Define the Date for activation to occur.

date Valid values: year, month and date, in the format yyyy-mm-dd,
where yyyy is a four digit year value, mm is a two digit month value
from 1 to 12, dd is a two digit day value from 1 to 31.
disabled Disable Validation Timer.
enabled Enable Validation Timer.
Define the Time for activation to occur.

time Valid values: hours and minutes, in the format hh:mm, where hh is a
two digit hour value from 1 to 24 and mm is a two digit minute
value from 1 to 60.
Enter the Timer value for the Validation Timer.
timer
Valid values: 10 to 300 (in minutes).

Guidelines
Use this command to activate a newly installed software package. The validation timer value
may be supplied as part of this command. This parameter defines the time you have to
confirm or validate the new load prior to the system automatically reverting to the old load.
During the validation time certain database file and configuration file actions are denied.

OSA 5422 R11.1.1 -CLI Reference Guide - Issue: Issue A 94

Oscilloquartz: An ADVA Company Commands Reference

If swdl-activation-ip (Software Download Activation In Progress) and/or swdl-validation-ip

(Software Download Validation In Progress) condition notification code is set to anything
other than not reported (nr), the condition may be retrieved by using the show conditions
command. Use the show release-versions command to observe the active and standby
software versions.

Use the show audit-log to observe the time the activation timer and/or validation timer is
set to expire.

Example
Refer to the following example where activation timer and validation timer are set, and
where swdl-activation-ip and swdl-validation-ip condition notification code is set to na:

ADVA--> admin upgrade

ADVA:upgrade--> activate time 12:10 enabled 60
ADVA:upgrade--> show file-services-status

File Transfer Status : in_progress

File Transfer Percent Complete : 100
Database or Upgrade Current State : SWUPGRADE

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|system |swdl-activation-ip |nsa |near |rcv |na |2014-03-
12,12:45:47
|system |swdl-validation-ip |nsa |near |rcv |na |2014-03-
12,12:45:47
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-01-
12,11:45:52

ADVA:upgrade--> show audit-log

2014-03-17 11:37:41::STCHG:CPMR-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:ACCESS PORT-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:FLOW-1-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:NETWORK PORT-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:48::STCHG:ACCESS PORT-1-1-1-1:OPER:Outage,SEC:ACT,FAF
2014-03-17 11:37:50::STCHG:NETWORK PORT-1-1-1-1:OPER:Outage,SEC:ACT,FAF
2014-03-17 11:38:03::0:DBCH:SYSTEM:SNMPENGINEBOOTS=2
2014-03-17 11:49:32:root:EVT:Validate upgrade requested
2014-03-17 11:51:46:root:EVT:Software copy from server requested
2014-03-17 11:53:56:root:EVT:Software install requested

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 95

Oscilloquartz: An ADVA Company Commands Reference

2014-03-17 00:00:00:root:EVT:2014-03-17 12:10:Software Activate timer set

2014-03-17 00:00:00:root:EVT:2014-03-17 13:10:Software Validate timer set

When the activation takes place, communications is not available and you will need to log
back onto the OSA 5422.

Once the activation is completed and the validation timer is in effect, the following status
results will occur:

ADVA:upgrade--> show file-services-status

File Transfer Status : success
File Transfer Percent Complete : 0
Database or Upgrade Current State : SWUPGRADE
ADVA:upgrade--> show conditions
|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|system |swdl-validation-ip |nsa |near |rcv |na |2014-03-
12,12:52:03
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,12:52:16
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,12:52:12

If the validation timer is canceled, the following status result will occur:

ADMIN:upgrade--> cancel val-timer

ADMIN:upgrade--> show file-services-status
File Transfer Status : success
File Transfer Percent Complete : 0
Database or Upgrade Current State : IDLE

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,12:52:16
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,12:52:14

ADVA:upgrade--> show release-versions

Active Release Version : 7.1.1-021
Standby Release Version : 7.1.1-020
Download Software Version : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 96

Oscilloquartz: An ADVA Company Commands Reference

If the validation timer is allowed to expire, the following status results will occur:

ADVA:upgrade--> show file-services-status

File Transfer Status : success
File Transfer Percent Complete : 100
Database or Upgrade Current State : IDLE

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,12:52:16
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,12:52:12

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

active-gnss-system-types
Sets which GNSS systems are enabled for the receiver.

Command Level
Configure GPS-Port

Syntax
active-gnss-system-types <list>

Comma separated list of the enabled system types.

Valid values: gps, glonass, beidou, galileo, sbas, qzss or a combination of
list
up to three system types.
qzss and sbas must be enabled together with gps.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 97

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:gnss-1-1-1-1--> active-gnss-system-types gps,glonass

ADVA-NE-1:gnss-1-1-1-1--> show gps-port
Admin State : management
Operational State : normal
Alias :
PPS Gen Condition : 1sat
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps,glonass
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 6
PDOP : Not Available
Self Survey Period : 86400
Sat Min1 Threshold : 3
...

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 98

Oscilloquartz: An ADVA Company Commands Reference

accounting
This is used to enable or disable the RADIUS accounting access for security protocols.

Security Level
superuser

Command Level
Configure User Security

Syntax
accounting <enabled | disabled>

Guidelines
This command is used to enable or disable the RADIUS accounting in the system.

Example:
ADVA--> configure user-security
ADVA:user-sec--> accounting enabled
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : enabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : all
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 99

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
regenerate-ssh-keys
add <user-id>
regenerate-ssl-certificate
auth-protocol
security-strength
auth-type
security-trap-type
config-ssl-strength
show active-ssl-certificate
config-user <user-id> cli-paging
show all-users
config-user <user-id> comment
show local-user
config-user <user-id> login-timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show security-system
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 100

Oscilloquartz: An ADVA Company Commands Reference

accounting-port
This is used for selecting the accounting port number.

Security Level
superuser

Command Level
Configure User Security

Syntax
accounting-port <port-num>

A port number must be entered for servers 1, 2, or 3.

port-num
Valid values: 1813

Guidelines
This command is used to enter the accounting port number on the server. The normal
accounting port number is 1813. The port number is the same for servers 1, 2, or 3.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap ?
<srvr-num> Enter the Remote Authentication Server Number
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_srvr-1--> accounting-port 1813
ADVA:user-sec:rem_auth_srvr-1--> show rap-server

RAS Status : enabled

Order : first
IP Version : ipv6
IPV4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 101

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
accounting-port
control
retries
ip-address (rap)
secret
ip-version (rap)
show rap-server
ipv6-address (rap)
timeout
order
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 102

Oscilloquartz: An ADVA Company Commands Reference

access-order
Configure whether to search the local Profiles or the remote authentication server first.

Security Level
superuser

Command Level
Configure User Security

Syntax
access-order <order>

Configure whether to search the local Profiles or the

order remote authentication server first. Valid values: local,
remote; Default is local.

Guidelines
This command is used to change the precedence of the authentication mechanisms
available on the system. The options are to check the username and password against those
user Profiles configured locally first or against those configured in the remote server first.

The supported values are: local - when userid/password authentication is required, check
the supplied values against the locally configured user Profiles first, and remote - check the
supplied values against the remotely configured user Profiles first.

If the user Profile cannot be found in the location specified by this attribute, the other
location will be checked.

Examples
ADVA--> configure user-security
ADVA:user-sec--> access-order local
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 103

Oscilloquartz: An ADVA Company Commands Reference

Key Generation Status : idle

RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : all
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login-timeout show local-user
config-user <user-id> password show provisioned-ssl-certificate
config-user <user-id> priv-level show remote-user
delete <user-id> show security-system
log-anonyme-interval tacacs-privilege-control
nas-ip-address tacacs-user-privilege
nas-ipv6-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 104

Oscilloquartz: An ADVA Company Commands Reference

add <user-id>
Add a new local Security User.

Security Level
superuser

Command Level
Configure User Security

Syntax
add <user-id> <password> <repeat-password> <level>

The user name to associate with this user Profile.

user-id
Valid values: Character string - 8 to 32 characters
The password associated with this user Profile.
Valid values: Character string - 8 to 32 characters,
with the following rules:1) Passwords must contain a
mix of upper and lower case characters, and a mix of
alpha and number characters, e.g., sn0dGra55. 2)
Passwords shall not contain more than two
repeating alphanumeric characters in consecutive
character positions. 3) Sequences of adjacent letters
password
or numbers are not allowed at the start or end of the
password (e.g., 12345A, 1ABCDE are invalid).4)
Passwords must neither begin nor end with a
sequence of three alphanumeric characters in
ascending or descending order (e.g., 123admin,
adminabc are invalid).5) Password cannot be the
same as the username, cannot be ‘password’
regardless of case and cannot be ‘passw0rd’
regardless of case.
repeat-password Re-enter the password to match the first one.
The level dictates which commands that this user is
allowed to perform. See description under
level Guidelines below for each security level.
Valid values: maintenance, provisioning, retrieve,
superuser

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 105

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command is used to add a new local Security User. The command is handled by the
parent object - which is why the EID is the SecuritySystemEid. This requires that the
password be entered twice and will be compared to ensure consistency.

Password restrictions are: Passwords must be between 8 and 32 characters (inclusive).

Passwords must contain a mix of upper and lower case characters and must contain a mix of
alpha and number characters. Passwords shall not contain repeating alphanumeric
characters in consecutive character locations. Passwords must neither begin nor end with a
sequence of three alphanumeric characters (e.g., 123admin, adminabc are invalid).

Three pre-configured user accounts are provided as default: “root�? (Superuser level),
“netadmin�? (Provisioning level), and “user�? (Maintenance level). Default passwords for
pre-configured user accounts is “ChgMeNOW.�?

The following describes each security level:

retrieve - user will be limited to commands to retrieve status and configuration info.

maintenance - retrieve level privileges plus maintenance operations (such as ping,

loopbacks).

provisioning - maintenance level privileges plus configuration commands.

superuser - all user commands In order to perform this command, the logged in user must
be a superuser.

To change other parameters from default values, refer to the Related Commands.

Examples
ADVA--> configure user-security
ADVA:user-sec--> add SamanthaTeig ******** ******** retrieve
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *******
Comment :
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 106

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
regenerate-ssh-keys
accounting
regenerate-ssl-certificate
add <user-id>
security-strength
auth-protocol
show active-ssl-certificate
auth-type
show all-users
config-ssl-strength
show local-user
config-user <user-id> cli-paging
show provisioned-ssl-certificate
config-user <user-id> comment
show remote-user
config-user <user-id> login-timeout
show security-system
config-user <user-id> password
tacacs-privilege-control
config-user <user-id> priv-level
tacacs-user-privilege
delete <user-id>
unlock-user
nas-ip-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 107

Oscilloquartz: An ADVA Company Commands Reference

add activity
Add a scheduled Syncjack activity.

Security Level
Provisioning

Command Level
Configure Syncjack Schedule

Syntax
add activity <activity-eid> <activity-id> [<start-time> | now] [<duration> | forever]
<probe-list>

Unique identifier for this activity.

activity-eid
Valid values: syncjack_schedule-1-1-1-n (n = 1 to
255)
Character string for ease of identification for this
activity-id activity.
Valid values: up to 64 ASCII characters
The time the scheduled activity is to begin.
start-time
Valid values: yyyy-mm-dd,hh:mm:ss or now
How long in seconds the scheduled activity runs.
duration
Valid values: 1 to 4294967295, forever
List of configured probes to use for the scheduled
activity. Probe EIDs separated by commas.
probe-list
Valid values: clock_probe-1-n (n = 1 to 2), ptp_clock_
probe-1-n (n = 1 to 4), ptp_network_probe-1-1.

Guidelines
This command is used to configure scheduled Syncjack activity.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure syncjack-schedule
ADVA-NE-1:syncjack:syncjack-schedule--> add activity syncjack_schedule-1-1-1-1 doctest
now 60 clock_probe-1-2
ADVA-NE-1:syncjack:syncjack-schedule--> show activity syncjack_schedule-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 108

Oscilloquartz: An ADVA Company Commands Reference

Activity ID : doctest
Schedule Type : one-shot
Start Time : 2014-01-24,23:12:28
Duration : 60
Interval : 0
Scheduled Entities : clock_probe-1-2

Related Commands
add activity
show activity
delete activity

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 109

Oscilloquartz: An ADVA Company Commands Reference

add arp-entry
Add an IPv4 Address to the Address Resolution Protocol (ARP) table. To delete an arp entry,
use the delete arp-entry command.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
add arp <ip-eid> <ip-address> <mac-address>

IPv4 Entity Identifier.

ip-eid
Valid values: eth0
IPv4 Address.
ip-address
Valid values: Valid IP Address.
MAC Address.
mac-address
Valid values: Valid MAC Address

Guidelines
This command creates a new arp entry.

Examples
ADVA--> configure communication
ADVA:comms--> add arp-entry eth0 10.10.10.10 12:23:34:45:56:67
ADVA:comms--> show arp-entries
|MAC Address |IP Address |Interface |Type
|-------------------|----------------|------------|-----|
|12:23:34:45:56:67 |10.10.10.10 |eth0 |static
|c0:91:34:d7:9f:00 |10.12.8.1 |eth0 |dynamic
|00:0c:29:4a:f8:aa |10.12.15.254 |eth0 |dynamic

Related Commands
flush-arp-cache
add ip-route show mgmttnl
list mgmttnl
add mgmttnl show ping-result
ping
configure src-addr show src-addr
show arp-entries
delete arp-entry show trace-route-result
show eth0
delete ip-route trace-route
show ip-interface eth0
delete mgmttnl
show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 110

Oscilloquartz: An ADVA Company Commands Reference

add boundary-clock
Create a Precision Time Protocol (PTP) Boundary Clock.

In a PTP Master-Slave Hierarchy, a Boundary Clock is a clock that has multiple Precision
Time Protocol (PTP) ports in a domain and maintains the timescale used in the domain. A
Boundary clock can serve as both a master clock and a slave clock simultaneously.

The Boundary Clock synchronizes itself to a best master clock through a slave port and
supports synchronization of remote clock clients to it on master ports.

Boundary clocks can improve the accuracy of clock synchronization by reducing the number
of 1588v2-unaware hops between the master and the client. Boundary clocks can also be
deployed to deliver better scale because they reduce the number of sessions and the
number of packets per second on the master.

The System feature PTP-MC/BC must be enabled prior to creating a Boundary Clock. See
configure feature.

To create a Boundary Clock, there must be a fully provisioned Telecom slave or G.8275.2
PTP slave clock. A fully provisioned Telecom slave has:

l A Slave Only Ordinary Clock (SOOC) properly configured.

l The SOOC has OCS Port properly configured.

Command Level
Configure PTP Network Element

Syntax
add boundary-clock <bc-eid> <alias> <clock-id> <timing-source> <ptp-domain-number>

The Entity Identifier of the Boundary Clock to be

bc-eid created.
Valid values: ptp_bc-1-n,where n=1
The Alias given to the Boundary Clock.
Valid entry: Character string - 0 to 256 characters, no
alias space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 111

Oscilloquartz: An ADVA Company Commands Reference

The unique Identifier for the PTP Clock.

Valid entry: A 16-digit hex number which is unique

clock-id
System-wide. The default value: <DCN MAC
Address> <Unique Number> Example:
0080ea2202100002
The Telecom slave clock used as time source for the
boundary clock.
timing-source
Valid values: ptp-clock, ts-ne-n; where: ne=1, n=1.
Example: ts-1-1.

ptp-domain-
This PTP domain number is used in the domain
number
Number field of the PTP header in the PTP packet.
Valid values: 0 — 255.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> add boundary-clock ptp_bc-1-1 Fitsimmons 0080ea33b0a00001 ts-1-1 4
ADVA:ptp-NE-1--> show boundary-clock ptp_bc-1-1

Alias : Fitsimmons
Admin State : in-service
Operational State : normal
Secondary States : act
Ptp Domain Number : 4
Timing Source : ts-1-1
Clock Identity : 0080ea33b0a00001

Related Commands
configure feature show boundary-clock
delete boundary-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 112

Oscilloquartz: An ADVA Company Commands Reference

add clock-probe
This command creates a Syncjack Clock Probe for Clock Accuracy Analysis.

Security Level
Provisioning

Command Level
Configure Clock Accuracy

Syntax
add clock-probe <clock-probe-eid> <clock-probe-id> <reference-eid> <source-eid>
<expected-ql> <source-type> <mask-type> <margin> <raw-data> <meas-type>

Clock Probe EID

clock-probe-eid
Valid values: clock_probe-1-n; where, n=1-2Example:
clock_probe-1-1
Identifying string
clock-probe-id
Valid values: up to 15 ASCII characters (no spaces)
Identifies the reference.
reference-eid
Valid values: available references, see the OSA 5422
Operation and Provisioning Manual.
Identifies the source.
source-eid
Valid values: Available references, see the OSA 5422
Provisioning and Operations Manual.
Expected QL.
expected-ql
Valid values: ql-eec1, ql-none, ql-prc, ql-ssu-1, ql-
ssu-b
Clock Probe source type.
source-type
Valid values: frequency, phase.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 113

Oscilloquartz: An ADVA Company Commands Reference

Mask type for probe.

Valid values: g823-e1-sec, g823-e1-ssu, g823-e1-

traffic, g823-pdh, g824-t1-sync, g824-t1-
mask-type traffic,g8261-1, g8261-e1-case1, g8261-e1-case2,
g8261-eec-opt1, g8261-t1-case1, g8262-eec-opt1,
g8262-eec-opt1-temp, g8262-eec-opt1-tolerance,
g8262-eec-opt2, g8263, g8263-const-temp, g8263-
var-temp, g8272-prtc, user-defined.
MTIE Mask Margin.
margin
Valid values: 0 to 99
Enable or disable Raw Data Collection.
raw-data
Valid values: enabled, disabled
Measurement type.
meas-type
Valid values: frequency, phase

Guidelines
This command is used to create a Syncjack Clock Probe. For several Probe attributes, “add
probe" should be followed with a configuration change.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> add clock-probe clock_probe-1-1 ClockProbe1 gps-1-1-
1-1 pps-1-1-1-2 ql-none frequency g823-pdh 1 disabled frequency
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-1
Name : ClockProbe1
Current State : not-scheduled
Source Failure : yes
Reference Failure : yes
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : pps-1-1-1-2
Source Type : frequency
Measurement Rate, (measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : frequency
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result : N/A
Time of last TIE Result : N/A
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 114

Oscilloquartz: An ADVA Company Commands Reference

Max TE Clear Threshold, (ns) : 0

Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : disabled
|Time int. (s)| MTIE (ns) | Mask status|Mask Margin status|
|-------------|-----------|------------|-----------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
max-te-clear-threshold
add clock-probe max-te-threshold
const-te-clear-threshold measurement-type
const-te-threshold mtie-mask-margin
const-te-windowdelete clock-probe mtie-mask-type
delete history-result mtie-restart
show clock-probe name (ne, probe)
show history-result reference, reference-eid
expected-ql source-eid
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 115

Oscilloquartz: An ADVA Company Commands Reference

add community
Create a new SNMPv1/v2c Community Entry. A community Entry acts as a password for the
specified community, and is used to authenticate information sent between a manager and
an agent. The name is sent in every packet between the manager and the agent. The read
and write options determines whether information is read-only or read-write by a manager.
Use the delete community command to remove a community entry.

Security Level
superuser

Command Level
Configure SNMP

Syntax
add community <name> <access>

A character string representing the SNMP

name Community Name.
Valid values: Character string - up to 64 characters
The SNMP Access type support for this community.
access
Valid values: access-none, readonly, readwrite

Guidelines
Create a new SNMPv1/v2c Community Entry. Default communities are:

private (readwrite access)

public (readonly access)

Examples
ADVA--> configure snmp
ADVA:snmp--> add community TestOne readwrite
ADVA:snmp--> show community TestOne

Community Name : TestOne

Community Access : readwrite

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 116

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add community
show all-notify-entries
add target-address
show all-target-addresses
add target-params
show all-target-params
add usm-user
show all-usm-users
configure usm-user-auth-key
show community
configure usm-user-priv-key
show notify-entry
delete community
show target-address
delete target-address
show target-params
delete target-params
show usm-user
delete usm-user
snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 117

Oscilloquartz: An ADVA Company Commands Reference

add eqpt
Creates a line card.

l For pps-x16: A pps16port group cannot be created when the signal direction of
pps-1-1-2 is input.
l For clk-x16: A clk16port group cannot be created when the signal direction of clk-
1-1-2 is input.

Command Level
Configure network-element

Syntax
add eqpt <linecardtype> <slot-num>

The type of the line card.

linecardtype
Valid values: bits-x16, clk-x16, ge-4s, irig-b, pps-x16, tod-pps-x16,
clk-x4-lpn.
The slot number of the line card.
slot-num
Valid values: 1-2.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> add eqpt bits-x16 2
ADVA-NE-1--> show bits-x16 bitsx16-1-1-2
Admin State : management
Operational State : outage
Secondary States : act,ueq
Card Type : bits-x16
Alias :
Physical Entity Name :
Hardware Revision :
USI :
CLEI Code :
Part Number : Not Available
Manufacturer Date : Not Available
Manufacturer Site :
Temperature (deg C) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 118

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
delete eqpt
admin-state
show <linecardtype>
alias
signal-direction (pps-port)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 119

Oscilloquartz: An ADVA Company Commands Reference

add ip-route
Create a static IPv4 route entry in the system routing table. This is used for management
network connectivity. To delete an IP static route, use the delete ip-route command.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
add ip-routeinterface<destination> <mask> <ip-eid> <metric> <advertise>
add ip-route nexthop <destination> <mask> <gateway> <ip-eid> <metric> <advertise>

The destination IPv4 address to add.

destination
Valid values: Valid IPv4 Address
IP address of next hop Gateway.
gateway
Valid values: Valid IPv4 gateway Address.
IP Entity Identifier.
ip-eid
Valid values: eth0
The Mask applied to define the subnet of this gateway. Valid
mask
values: Valid IPv4 Mask
Assign this cost (or Metric) to the route.
metric
Valid values: 1 to n
Advertise Static Route on other RIP enabled interfaces.
advertise
Valid Entry: enabled disabled

Examples
Example for adding an IP route interface:

ADVA--> configure communication

ADVA:comms--> add ip-route interface 10.10.10.10 255.255.255.0 eth0 1
ADVA:comms--> show ip-routes

|Interface |Mask |Gateway |Destination |Metric |Type

|-------------|----------------|---------------|-----------------|--------|-------|
|eth0 |255.255.255.0 |0.0.0.0 |10.10.10.10 |3 |static

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 120

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry flush-arp-cache
show mgmttnl
add ipv6-route list mgmttnl
show ping-result
add mgmttnl ping
show src-addr
configure src-addr show arp-entries
show trace-route-result
delete arp-entry show eth0
trace-route
delete ip-route show ip-interface eth0
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 121

Oscilloquartz: An ADVA Company Commands Reference

add ipv6-route
Create a static IPv6 route entry in the IPv6 routing table of the system. This is used for
management network connectivity. To delete an IP static route, use the delete ipv6-route
command.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
add ipv6-route interface <destination> <prefix-length> <ipv6-interface> <metric> <ripng-
ctrl>

add ipv6-route nexthop <destination> <prefix-length> <gateway>

<ipv6-eid> <metric> <ripng-ctrl>

The type of route.

route-type
Valid values: interface, nexthop.
The destination IPv6 address of this route to add.
destination
Valid values: Valid IPv6 Unicast address.
The length of the IPv6 address prefix.
prefix-length
Valid values: 0-128. The default is 0.
The gateway IPv6 address of this route.
gateway
Valid values: Valid IPv6 gateway address
The interface associated with this IPv6 route.
ipv6-interface
Valid values: eth0
Assign this cost (or Metric) to the route.
metric
Valid values: 1 to 1024.
Enable or disable RIPng advertising.
ripng-ctrl Valid values: enabled, disabled. The default is
disabled.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 122

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command is used to create a static IPv6 route.

IPv6 must be enabled on the DCN port before an IPv6 route can be created. For how to
enable IPv6, see ip-mode.

Examples
Example for adding an IPv6 static route interface:

ADVA--> configure communication

ADVA:comms--> add ipv6-route interface 2534:3454:0000:0000:0000:0000:0000:0000 64 eth0
28 enabled

ADVA:comms--> show ipv6-routes

===========================================================
Interface : eth0
Destination : 2534:3454:0000:0000:0000:0000:0000:0000
Prefix Length : 64
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 28
Advertise : enabled
Type : static
===========================================================
Interface : eth0
Destination : FDAA:0000:0000:0000:0000:0000:0000:0000
Prefix Length : 60
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 256
Advertise : enabled
Type : static
===========================================================

Related Commands
add arp-entry dhcpv6-control
ip-mode
add ndp-entry flush-arp-cache
ipv6-sys-def-gateway
add ip-route list mgmttnl
ipv6-unicast-addr
add mgmttnl ping
show mgmttnl
configure src-addr ping6
show ping-result
delete arp-entry show arp-entries
show src-addr
delete ip-route show eth0
show trace-route-result
delete ipv6-route show ip-interface eth0
trace-route
delete mgmttnl show ip-routes
trace-route6
delete ndp-entry show ipv6-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 123

Oscilloquartz: An ADVA Company Commands Reference

add master-clock
Create a Precision Time Protocol Master Clock (PTP MC).

A master clock is a clock that is the source of time to which all other clocks on that path
synchronize. You must enable the system feature PTP-MC/BC before you create a master
clock. See configure feature

Security Level
Provisioning

Command Level
Configure PTP Network Element

Syntax
add master-clock <mc-eid> <alias> <clock-id> <priority_1> <priority_2> <clock-eid> <ptp-
profile> <ptp-domain-number>

The Entity Identifier of Master Clock to be created.

mc-eid
Valid values: ptp_master_clock-ne-n;Where: ne=1,
n=1-3.Example: ptp_master_clock-1-1
The Alias given to the Master Clock.
Valid values: Character string - 0 to 256 characters,
alias no space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.
The unique Identifier for the PTP Clock.

Valid values: A 16-digit hex number which is unique

clock-id
System-wide. The default value: <DCN MAC
Address> <Unique Number> Example:
0080ea2202100002
priority_1 Priority 1 (based on IEEE 1588v2).
priority_2 Priority 2 (based on IEEE 1588v2).
The time source of the master clock.
timeclock-eid Valid values: timeclock-ne-shelf-nte-n; where: ne=1,
shelf-1, nte-1, n=1. Example, timeclock-1-1-1-1.
PTP profile of the clock. Valid values:
ptp-profile
g.8265.1,g.8275.2, ptp-enterprise

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 124

Oscilloquartz: An ADVA Company Commands Reference

ptp-domain-
This PTP domain number is used in the domain
number
Number field of the PTP header in the PTP packet.
Valid entry: 0-255

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> add master-clock ptp_master_clock-1-1 mc1 0080ea33b0a00001 1 2 time_
clock-1-1-1-1 g.8265.1 0
ADVA:ptp-NE-1--> show master-clock ptp_master_clock-1-1

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none
PTP Profile : g.8265.1

Related Commands
alias configure feature
delete master-clock priority1
priority2 show master-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 125

Oscilloquartz: An ADVA Company Commands Reference

add master-virtual-port
Create a Master Virtual Port.

Security Level
Provisioning

Command Level
Configure Master Clock Interface

Syntax
add master-virtual-port <mvp-eid> <alias> <ptp_fp-eid>

The Entity Identifier of the Master Virtual Port to be

created.
mvp-eid
Valid values: master_virtual_port-ne-bc/mc-mci-n.
Where: ne=1, bc=1, mci=1-4, n=1.Example: master_
virtual_port-1-1-1-3
The alias given to the Master Virtual Port to be
created.
Valid values: Character string - 0 to 256 characters,
alias
no space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.
The PTP flow point to associated with. This PTP Flow
Point must have a type oc-master.

ptp_fp-eid Valid values: For Access Port: acc_ptp_flow_pt-ne-

shelf-nte-port-n. Where: ne=1, shelf=1, slot=1,
port=1, n=1-m (max ptp flow points). Example: acc_
ptp_flow_pt-1-1-1-3-1.

Guidelines
This command is used to create a Master Virtual Port.

For each Master Clock Interface, only one Master Virtual Port can be created.

To create a Master Virtual Port, there must be an PTP Flow Point available, and this PTP Flow
Point must have a type oc-master.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 126

Oscilloquartz: An ADVA Company Commands Reference

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> add master-virtual-port master_
virtual_port-1-1-1-1 mvp1 acc_ptp_flow_pt-1-1-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show master-virtual-port master_
virtual_port-1-1-1-1

Alias : mvp1
Admin State : management
Operational State : outage
Secondary States : sgeo
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1

Related Commands
admin-state delete master-virtual-port
alias show master-virtual-port

add mci
Create a Precision Time Protocol Master Clock Interface (PTP MCI). Up to 16 MCIs can be
created. The Master Clock Interface serves as PTP master port of the BC or MC and
maintains PTP Protocol for the specific Ethernet connection.

In a PTP Implementation, the MCI is used to:

l Manage remote slaves (create/delete).

l Determine maximum number of remote slaves supported.
l Determine the maximum PTP message rate.
l Dispatch PTP traffic and events to the corresponding remote slaves:
l PTP data messages.
l Timer event

Command Level
Configure Boundary Clock

Configure Master Clock

Syntax
add mci <mci-eid> <alias> <clock-type> <delay-mech> <priority-mode> <ip-priority> <ip-
version> [<ipv4-address>|<ipv6-address>] [<ipv4-mask>|<ipv6-prefix>] <maxslaves> <max_

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 127

Oscilloquartz: An ADVA Company Commands Reference

sync_message_rate> <max_announce_message_rate> <if-name> <maxstaticslaves>

<maxleaseduration> <max_delay_response_message_rate> <clock-class-profile> <announce_ext_
tlv>

Entity Identifier of the Master Clock Interface. Valid values: ptp_

mci-eid ptp_mci-ne-mc-n. Where: ne=1, bc/mc=1, n=1-416.Example: ptp_
ptp_mci-1-1-1
An Alias given to the MCI
Valid values: Character string - 0 to 256 characters, no space;
alias
Default is null. Empty string or string containing SPACE must be
enclosed in quotation marks. String consisting of only SPACE is
not allowed.
Master Clock Type.
clock-type
Valid values: one-step, two-step
Delay Mechanism.
delay-mech
Valid values: end-to-end
The priority mode.
priority-mode
Valid values: dscp, tos, none. The default is none.
The priority value.
Valid values: The valid entries change depending on the
<priority-mode>:

l If the <priority-mode> is set to Type Of Service (TOS): 0-7.

ip-priority l If the <priority-mode> is set to Differentiated Services Code
Point (DSCP): 0-63.
l If the <priority-mode> is set none, then this setting is not
applicable.

The default value is 0.

Specify the IP version of the Master Clock.
ip-version
Valid values: ipv4, ipv6. The default is ipv4.
Master Clock IPv4 address.
ipv4-address
Valid values: Valid IPv4 address.
Master Clock IPv6 unicast address.
ipv6-address
Valid values: Valid IPv6 address.
IPv4 mask for the Master Clock IPv4 address.
ipv4-mask
Valid values: Valid IPv4 mask.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 128

Oscilloquartz: An ADVA Company Commands Reference

IPv6 prefix for the Master Clock IPv6 address.

ipv6-prefix
Valid values: Valid IPv6 prefix.
Maximum number of slaves can connect to the boundary clock.

maxslaves Valid values: 0-4 (when PTP-Extended-Remote-Slaves is Disabled),

0-16 (when PTP-Extended-Remote-Slaves is Enabled). The default
is 1.
The maximum frequency to transmit Synchronization Messages.
max_sync_message_ Valid values: 1-pkt-per-sec,128-pkt-per-sec, 16-pkt-per-sec,2-pkt-
rate per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-per-sec, 8-pkt-per-
sec. The default is 32-pkt-per-sec.
The maximum frequency to transmit Announce Messages.
max_announce_ Valid values: 1-pkt-per-1-sec,1-pkt-per-16-sec, 1-pkt-per-2-sec,1-
message_rate pkt-per-4-sec, 1-pkt-per-8-sec, 2-pkt-per-1-sec, 4-pkt-per-1-sec,
8-pkt-per-1-sec. The default is 1-pkt-per-sec.
The MCI IP interface name (mandatory entry).
ifname
Valid values: 1-15 alphanumeric characters (no spaces).
Maximum number of static slaves that can connect to the
boundary clock.
maxstaticslaves
Valid values: 0-4 (when PTP-Extended-Remote-Slaves is Disabled),
0-16 (when PTP-Extended-Remote-Slaves is Enabled). The default
is 0.
The maximum duration for MS lease.
maxleaseduration
Valid values: 60-1000 seconds. The default is 300.
Master Lease Duration for all Unicast Messages Negotiation
(UMN) message types (granted announce, Sync and Delay
Response). The slave clock must refresh the Unicast service every
lease duration time. In the case where different lease duration
max_delay_response_ values are configured for MCI and SOOC, the smaller value is
message_rate accepted.
Valid values: 0-pkt-per-sec, 1-pkt-per-sec, 128-pkt-per-sec, 16-
pkt-per-sec, 2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-
per-sec, 8-pkt-per-sec. The default is 32-pkt-per-sec.
The clock class profile for the relevant G.8265.1, PTP Enterprise-
And-IEEE-1588-2008, and G.8275.2 Master Clocks.
clock-class-profile
Valid values: g.8265.1, g.8275.2, ptp-enterprise-and-ieee-1588-
2008. The default is g.8265.1.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 129

Oscilloquartz: An ADVA Company Commands Reference

When applicable, enable or disable the Announce Extension TLV.

This extension may be used when a Master Clock is configured to
use the Enterprise Profile and is disabled otherwise (for example,
announce_ext_tlv when used as a L3 PTP multicast profile). When this field is not
configurable, it is set to N/A.
Valid values: enabled, disabled

Examples
Example of creating an IPv4 MCI:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> add mci ptp_mci-1-1-1 mci1 one-step end-to-end none
1 ipv4 10.10.10.1 255.255.255.0 5 1-pkt-per-sec 4-pkt-per-1-sec mci001 3 300 32-pkt-per-
sec g.8265.1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show mci ptp_mci-1-1-1

Alias : mci1
Administrative State : management
Operational State : outage
Secondary States : act,sgeo
IPv4 Address : 10.10.10.1
Subnet Mask : 255.255.255.0
IPv6 Address : Not Available
Prefix : Not Available
Interface name : mci001
Clock Type : one-step
Delay Mechanism : end-to-end
IP Version : ipv4
Ip Qos : 1
Ip Priority Mode : none
Max Lease Duration : 300
Max Slaves Supported : 5
Max Static Slaves Supported : 3
Port Identity :
Max Sync Msg Rate : 1-pkt-per-sec
Max Delay Req Msg Rate : 4-pkt-per-sec
Max Announce Msg Rate : 32-pkt-per-sec
Ptp Domain Number : 4
Clock Class Profile : g.8265.1
Clock Class : 0
Announce Ext TLV : Not Available

Example of creating an IPv6 MCI:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 130

Oscilloquartz: An ADVA Company Commands Reference

ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1

ADVA:ptp-NE-1:ptp_master_clock-1-1--> add mci ptp_mci-1-1-2 mci2 one-step end-to-end none
1 ipv6 2000:0000:0000:0000:0000:0000:0000:0000 64 32 32-pkt-per-sec 4-pkt-per-1-sec
mci002 4 300 8-pkt-per-sec g.8265.1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show mci ptp_mci-1-1-2

Alias : mci2
Administrative State : management
Operational State : outage
Secondary States : act,sgeo
IPv4 Address : Not Available
Subnet Mask : Not Available
IPv6 Address : 2000:0000:0000:0000:0000:0000:0000:0000
Prefix : 64
Interface name : mci002
Clock Type : one-step
Delay Mechanism : end-to-end
IP Version : ipv6
Ip Qos : 1
Ip Priority Mode : none
Max Lease Duration : 300
Max Slaves Supported : 32
Max Static Slaves Supported : 4
Port Identity :
Max Sync Msg Rate : 32-pkt-per-sec
Max Delay Req Msg Rate : 8-pkt-per-sec
Max Announce Msg Rate : 4-pkt-per-sec
Ptp Domain Number : 4
Clock Class Profile : g.8265.1
Clock Class : 0
Announce Ext TLV : Not Available

Related Commands
delete mci, show mci

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 131

Oscilloquartz: An ADVA Company Commands Reference

add mgmttnl
Create a Management Tunnel on an Access Port. You can create one management tunnel
per access port.

Command Level
Configure Communications

Syntax
add mgmttnl <mgmttnlNum> <mgmttnlName> ethernet vlan <mgmttnlVlanId> <ip-mode> <DHCP-
control> <ip-address> <net-mask> <port-eid> <def-gateway>

Management Tunnel Number.

mgmttnlNum
Valid values: 1 to 255
Management Tunnel Name.
mgmttnlName
Valid values: 1 to 15 alphanumeric characters
VLAN ID for management tunnel
mgmttnlVlanId
Valid values: 1 to 4095
IP Entity Identifier.
DHCP-control
Valid values: enabled, disabled
Sets the IP type for the DCN (eth0):
ip-mode
Valid values: ipv4-only, ipv4-and-ipv6.
The Mask applied to define the subnet of this management tunnel.
net-mask
Valid values: Valid IP Address
Assign management to an Access or Network Port.
port-eid
Valid values: access-1-1-1-1, network-1-1-1-1.
IP address of the Default Gateway
def-gateway
Valid values: Valid IP Address

Examples
ADVA--> configure communication
ADVA:comms--> add mgmttnl 1 phoenix1 ethernet vlan 2000 disabled 192.168.0.4
255.255.255.0 network-1-1-1-1 192.168.0.1
ADVA:comms--> show mgmttnl mgmt_tnl-1
IP Address : 192.168.0.4
Subnet Mask : 255.255.255.0
VLAN ID : 2000
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 132

Oscilloquartz: An ADVA Company Commands Reference

DHCP Client ID Control : disabled

DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 172.17.23.1
Interface : eth0

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

add nci
Adds an NTP clock interface to NTP clock.

Command Level
Configure NTP

Syntax
add nci <ntp_clock_interface-EID> <ip-version> <ipv4-address>|<ipv6-address> <mask>
<ipv4-gateway>|<ipv6-gateway <if-name> <dscp> <default-gateway-control> <time-control>
<daytime-control> <ntp-broadcast-control> <broadcast-ipv4-addr>|<broadcast-ipv6-addr>
<interval> <broadcast-max-hops> <broadcast-sym-key-id> <ntpv3|ntpv4>

EID of the NTP clock interface.

ntp_clock_interface-
Valid values: ntp_clock_interface_ne-shelf-n, where:
EID
ne=1, nc=1, n=1.
IP protocol of the NTP clock interface.
ip-version
Valid values: ipv4 or ipv6.
ipv4-address Valid IPv4 address.
ipv6-address Valid IPv6 address.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 133

Oscilloquartz: An ADVA Company Commands Reference

The length of the Prefix if the IP version is IPv6.

ipv6-prefix
Valid values: 0-64. The default is 0.
The network mask to associate with this IP Interface if the
mask IP version is IPv4.
Valid values: Valid IPv4 Mask; Default is 255.255.255.255.
ipv4-gateway Valid IPv4 address for the gateway.
ipv6-gateway Valid IPv6 address for the gateway.
The NTP clock interface name.
if-name
Valid values: 1–15 alphanumeric characters, no spaces.
dscp Enter a value from 0 to 63. The default is 0.
default-gateway- Enables or disables default IPv4/IPv6 gateway address.
control Valid values: enabled or disabled.
Enables or disables the time protocol (RFC868).
time-control
Valid values: enabled or disabled.
Enables or disables the daytime protocol (RFC867).
daytime-control
Valid values: enabled or disabled.
Enables or disables NTP broadcasting. When enabled you must
ntp-broadcast-control
configure these additional broadcasting attributes.
An applicable IPv6 address for the broadcast. Valid values:
broadcast-ipv4-addr
FF0x:x:x:x:x:x:x:x. Default: ff05::101.
An applicable IPv4 address for the broadcast. Valid values:
broadcast-ipv6-addr 224.0.1.0 ... 238.255.255.255 Default: 224.0.1.1, or the network
broadcast address.
The broadcast interval.

Valid values: 1-pkt-per-1024-sec, 1-pkt-per-128-sec,

interval 1-pkt-per-16-sec, 1-pkt-per-16384-sec, 1-pkt-per-2048-sec,
1-pkt-per-256-sec, 1-pkt-per-32-sec, 1-pkt-per-32768-sec,
1-pkt-per-4096-sec, 1-pkt-per-512-sec, 1-pkt-per-64-sec,
1-pkt-per-65536-sec, 1-pkt-per-8-sec, 1-pkt-per-8192-sec.
The maximum TTL/Hop Limit of the NTP broadcast messages.
broadcast-max-hops
Valid values: 1 to 255. Default is 1.
broadcast-sym-key-id Enter the key ID that is used to authenticate broadcast messages.
ntpv3 or ntpv4 The version of the NTP broadcast messages. Default is NTPV4.

Examples
ADVA--> configure ntp
ADVA:ntp--> network-element ne-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 134

Oscilloquartz: An ADVA Company Commands Reference

ADVA:ntp-NE-1--> configure ntp-clock ntp_clock-1-1

IPv4 Disabled Broadcasting

ADVA:ntp-NE-1:ntp_clock-1-1--> add nci ntp_clock_interface-1-1-2 ipv4 1.1.1.1

255.255.255.255 1.1.1.2 nci2 0 enabled disabled disabled disabled

IPv4 Enabled Broadcasting

ADVA:ntp-NE-1:ntp_clock-1-1--> add nci ntp_clock_interface-1-1-2 ipv4 1.1.1.1

255.255.255.255 1.1.1.2 nci2 0 enabled disabled disabled enabled 224.0.0.1 1-pkt-per-64-
sec 1 1 ntpv3

IPv6 Disabled Broadcasting

ADVA:ntp-NE-1:ntp_clock-1-1--> add nci ntp_clock_interface-1-1-4 ipv6

2000:0000:0000:0000:0000:0000:0000:0004 64 0000:0000:0000:0000:0000:0000:0000:0000 nci4 0
disabled disabled disabled disabled

IPv6 Enabled Broadcasting

ADVA:ntp-NE-1:ntp_clock-1-1--> add nci ntp_clock_interface-1-1-2 ipv6

2000:0000:0000:0000:0000:0000:0000:0004 64 0000:0000:0000:0000:0000:0000:0000:0000 nci4 0
enabled disabled disabled enabled FF05:0000:0000:0000:0000:0000:0000:0004 1-pkt-per-64-
sec 1 1 ntpv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 135

Oscilloquartz: An ADVA Company Commands Reference

add ndp-entry
Add an IPv6 static Neighbor Entry.

Command Level
Configure Communications

Syntax
add ndp-entry <ipv6-interface> <ipv6-address>

The interface name associated with this IPv6 NDP entry.

ipv6-interface
Valid values: eth0
The IPv6 address of an IPv6 neighbor.
ipv6-address
Valid values: The valid IPv6 Unicast address of an IPv6 neighbor.
The MAC address of this neighbor entry.
mac-address
Valid values: The valid MAC address of an IPv6 neighbor.

Examples
Example of adding an IPv6 static route interface:

ADVA--> configure communication

ADVA:comms--> add ndp-entry eth0 0572:1258:0000:0000:0001:0000:0100:0000
ee:ff:dd:ee:1a:03

ADVA:comms--> show ndp-entries

|MAC Address |IPv6 Address |Interface |Type
|-------------------|------------------------------------------|---------------|---------
|
|ee:ff:dd:ee:1a:03 |0572:1258:0000:0000:0001:0000:0100:0000 |eth0 |static
|00:80:ea:03:03:03 |FDAA:0000:0000:0000:0000:0000:0000:00DD |eth0 |static
|c4:0f:07:e6:00:01 |FE80:0000:0000:0000:C60F:07FF:FEE6:0001 |eth0 |dynamic

add ntp-clock
Creates an NTP clock

Command Level
Configure NTP

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 136

Oscilloquartz: An ADVA Company Commands Reference

Syntax
add ntp-clock <ntp_clock-EID> <alias> <server-state-control> <gnss-sync-loss-handling>
<auth-control> <secure-mode-control> ntp-server|ntp-peering <autokey control>

The element identifier of the NTP clock.

ntp_clock-EID
Valid values: ntp_clock-1-n, where n=1.
alias Character string. 0 to 256 characters. No spaces. Default is null.
Sets NTP clock server.
server-state-control
Valid values: enables or disables.
The stratum level to report.
Valid values: strtm-1-li-unkn, strtm-10-li-unkn, strtm-11-li-unkn,
gnss-sync-loss- strtm-12-li-unkn, strtm-13-li-unkn, strtm-14-li-unkn,
handling strtm-15-li-unkn, strtm-16-li-nochg, strtm-16-li-unkn,
strtm-2-li-unkn, strtm-3-li-unkn, strtm-4-li-unkn, strtm-5-li-unkn,
strtm-6-li-unkn, strtm-7-li-unkn, strtm-8-li-unkn, strtm-9-li-unkn
Automatic key authentication.
auth-control
Valid values: enabled or disabled.
NTP clock responses to valid authenticated NTP requests.
secure-mode-control
Valid values: enabled or disabled.
ntp-server|ntp- ntp-server — the NTP clock receives time from the time reference
peering ntp-peering — the NTP clock receives time from another server
autokey control Valid values: enabled or disabled.

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1-->
ADVA:ntp-NE-1--> add ntp-clock ntp_clock-1-201 myalias enabled strtm-1-li-unkn enabled
enabled ntp-peering disabled

add ocs-port
Create an Ordinary Clock Slave (OCS) port on the telecom slave.

Security Level
Provisioning

Command Level
Configure SOOC
OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 137
Oscilloquartz: An ADVA Company Commands Reference

Syntax
add ocs-port <ocs_port-eid> <ptp_fp-eid>

The Entity Identifier of the OCS port.

ocs_port-eid
Valid values: ocs_port-ne-shelf-ts-n. Where: ne=1,
shelf=1, ts=1, n=1. Example: ocs_port-1-1-1-1
The PTP flow point to associated with. It must be the
same as PTP Flow Point specified at the creation of
the Telecom Slave. Valid values:
ptp_fp-eid
For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-
n. Where: ne=1, shelf=1, slot=1, port=1, n=1-m (max
ptp flow points). Example: acc_ptp_flow_pt-1-1-1-3-
1.

Guidelines
This command is used to create an Ordinary Clock Slave (OCS) port on the telecom slave.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> add ocs-port ocs_port-1-1-1-2 net_ptp_flow_pt-1-1-1-1-
3
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show ocs-port ocs_port-1-1-1-2
Alias :
Port Identity : 0080ea0000000001
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-3
PTP State : listening
Admin State : management
Operational State : outage
Secondary States : sgeo

Related Commands
alias
show ocs-port
delete ocs-port

add proxy-ndp
Adds an IPv6 static proxy neighbor entry.

Command Level
Configure Communications

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 138

Oscilloquartz: An ADVA Company Commands Reference

Syntax
add ndp-entry <ipv6-interface> <ipv6-address>

The interface name associated with this IPv6 proxy neighbor entry.
ipv6-interface
Valid values: eth0
The IPv6 address of an IPv6 proxy neighbor.
ipv6-address
Valid values: valid IPv6 unicast address.

Examples
ADVA--> configure communication
ADVA:comms--> add proxy-ndp eth0 <ipv6 address>

ADVA--> configure communication

ADVA:comms--> show proxy-ndp-entries

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 139

Oscilloquartz: An ADVA Company Commands Reference

add ptp-clock
Creates a PTP Clock.

Command Level
Configure PTP Network Element

Syntax
add ptp-clock <ptp_clock-eid> <alias> <ptp-profile> <clock-type> <clock-id> <priority_1>
<priority_2> <local_priority> <ptp-domain-number> <sync-ref> [ql-mode] [sync-id]
[expected-ql] [assumed-ql] [application-mode]

The Entity Identifier of the PTP clock.

ptp-clock-eid
Valid values: ptp_clock-1-nWhere: n=1Example: ptp_clock-1-1
An Alias given to the PTP Clock.
Valid values: Character string - 0 to 256 characters, no space;
alias Default is null. Empty string or string containing SPACE must be
enclosed in quotation marks. String consisting of only SPACE is not
allowed.
Valid values: g8275-1, g8275-2, ieee-1588-2008-annex-f, power-
ptp-profile
c37-238-2011, power-c37-238-2017, utility-iec-61850-9-3
clock-type Valid values: master-only, slave-only, boundary-clock, static-bc
The unique Identifier for the PTP Clock.

clock-id Valid values: A 16-digit hex number which is unique System-wide.

The default value: <DCN MAC Address> <Unique Number>
Example: 0080ea2202100002
priority_1 Priority 1 (based on IEEE 1588v2).
priority_2 Priority 2 (based on IEEE 1588v2).
local_priority Local Priority (based on IEEE 1588v2).
ptp-domain-number
sync-ref Valid values: enabled, disabled
ql-mode Valid values: enabled, disabled
sync-id
valid values: ql-eec1, ql-none, ql-prc, ql-ssu-a, ql-ssu-b.
expected-ql

assumed-ql valid values: ql-eec1, ql-na, ql-prc, ql-ssu-a, ql-ssu-b.

application-mode Valid values: docsis or telecom-pts.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 140

Oscilloquartz: An ADVA Company Commands Reference

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> add ptp-clock ptp_clock-1-1 Dallas g8275-1 master-only 0080ea39d1500001
128 128 128 24 disabled disabled none ql-eec1 ql-eec1

ADVA:ptp-NE-1--> show ptp-clock ptp_clock-1-1

Admin State : management
Operational State : normal
Secondary States : act
Alias :
PTP Profile : g8275-1
Application Mode : telecom-pts
Clock Type : master-only
Oper Mode : idle
Clock Identity : 0080eafffebdc400
PTP Domain Number : 24
Time Source : time_clock-1-1-1-1
Priority 1 : 128
Priority 2 : 128
Local Priority : 128
Clock Accuracy : 0xfe
Scaled Log Variance : 0xffff
Sync Id : none
Current Time Of Day : 1970-01-08,03:09:00
Active Slave Port : none
Clock Recovery State : na
Phase Recovery State : na
Time Traceability Status : disabled
Time Since Time Traceability Changed : 0
Freq Traceability Status : disabled
Time Since Freq Traceability Changed : 0
Sync Reference Mode : disabled
QL Mode : disabled
Network Clock Type : option1-sdh
Assumed QL : ql-prc
Expected QL : ql-none
Received QL : ql-na
Grandmaster Id : 0

Related Commands
admin-state localpriority
alias priority1
assumed-ql priority2
delete ptp-clock show ptp-clock
expected-ql show ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 141

Oscilloquartz: An ADVA Company Commands Reference

add ptp-clock-probe
This command creates a Syncjack PTP Clock Probe for Clock Analysis.

Security Level
Provisioning

Command Level
Configure Clock Analysis

Syntax
add ptp-clock-probe <ptp_clock_probe-eid> <ptp-clock-probe-id> <ptp_fp-eid> <reference-
eid> <ip-version> <slave-ip-address> <master-ip-address> <measurement-dir> <expected-ql>
<mask-type> <margin>

Clock Probe EID

ptp_clock_
probe-eid Valid values: ptp_clock_probe-1-n where:n = 1-
4Example: ptp_clock_probe-1-1
ptp-clock- Identifying string
probe-id
Valid values: up to 15 ASCII characters (no spaces)
The entity identifier of PTP Flow Point. Valid values:
For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-
ptp_fp-eid n. Where: ne=1, shelf=1, slot=1, port=1, n=1-m (max
ptp flow points). Example: acc_ptp_flow_pt-1-1-1-3-
1.
Identifies the reference.
reference-eid
Valid values: available references, see the OSA 5422
Operation and Provisioning Manual.
IP version for this probe.
ip-version
Valid values: ipv4
slave-ip- IP Address of the slave clock.
address
Valid entry: valid IPv4 address.
master-ip- IP Address of the master clock.
address
Valid entry: valid IPv4 address.
Direction of measurement.
measurement-dir
Valid entry: master-to-slave, slave-to-master.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 142

Oscilloquartz: An ADVA Company Commands Reference

Expected QL.
expected-ql
Valid entry: valid QL entry
Mask type for probe.
Valid entry: g823-e1-sec, g823-e1-ssu, g823-e1-
traffic, g823-pdh, g824-t1-sync, g824-t1-
mask-type traffic,g8261-1, g8261-e1-case1, g8261-e1-case2,
g8261-eec-opt1, g8261-t1-case1, g8262-eec-opt1,
g8262-eec-opt1-temp, g8262-eec-opt1-tolerance,
g8262-eec-opt2, g8263, g8263-const-temp, g8263-
var-temp, g8272-prtc, user-defined.
Margin.
margin
Valid entry: 1 to 99

Guidelines
This command is used to create a Syncjack PTP Clock Probe. For several Probe attributes,
“add ptp-clock-probe" should be followed with a configuration change.

The PTP Flowpoint used by this probe must have already been created in “Configure PTP"
(see Remote Slave Provisioning Order for G.8275).

While up to 4 PTP Clock Probes can be created, all must use the same reference port.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> add ptp-clock-probe ptp_clock_probe-1-1 PTPCLKProbe1
net_ptp_flow_pt-1-1-1-1-1 gps-1-1-1-1 ipv4 10.206.206.6 10.206.206.1 slave-to-master ql-
none g823-pdh 0
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1

Name : PTPCLKProbe1
Current State : not-scheduled
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Direction : slave-to-master
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 143

Oscilloquartz: An ADVA Company Commands Reference

Raw Data Collection : enabled

Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -4
Time of last TIE Result : 2014-10-31,21:41:14
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : none
MTIE Reset Control : disabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 144

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ptp-clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result
mtie-restart
show ptp-clock-probe
master-ip-address
show syncjack-telecom-slave
name (ne, probe)
show history-result
ptp-flowpoint
direction
reference, reference-eid
expected-ql
slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 145

Oscilloquartz: An ADVA Company Commands Reference

add ptp-fp
Create a new PTP Flow Point at an Access Port or Network Port.

Command Level
Configure PTP Access Port

Configure PTP Network Port

Syntax
add ptp-fp <ptp_fp-eid> <ptp_fp_type> <ptp-fp-cir> <ptp-fp-eir> <ptp-fp-buffersize>
<flow-eid> <untagged-frames> [<outer_ethertype> <outer_ptp-fp-vlanlist>] [<inner1_untag-
control> [<inner1_ethertype> <inner1_ptp-fp-vlanlist>]]
[<inner2_untag-control> [<inner2_ethertype> <inner2_ptp-fp-vlanlist>]]

The entity identifier of PTP Flow Point. Valid values:

ptp_fp-eid
For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-n. Where:
ne=1, shelf=1, slot=1, port=1, n=1-m (max ptp flow points).
Example: acc_ptp_flow_pt-1-1-1-3-1.
PTP Flow Point type.
Valid entry: monitoring, oc-master, oc-slave, eth-multicast, l3.

l For boundary clock/master clock — oc-master.

ptp_fp_type
l For slave clock — oc-slave.
l For PTP clock with G.8275.2 profile — l3.

The default is oc-slave.

The Committed Information Rate.
ptp-fp-cir
Valid entry: 0 to 10000000000 bps, Default is 0.
The Excess Information Rate.
ptp-fp-eir
Valid entry: 0 to 1,000,000,000 bps, Default is 0.

ptp-fp-buffersize
Buffer size (in Kbytes). Buffer size can be set from 1 to 2147483647.
The default setting is 0

flow-eid
The service flow to associate the with the PTP flowpoint. Valid
entry: none
Enable or Disable untagged frame support.
untagged-frames
Valid entry: disabled, enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 146

Oscilloquartz: An ADVA Company Commands Reference

Control over untagged traffic.

outer-untag-control
Valid entry: enabled, disabled
PTP Flow Point Outer Ether Type.
outer_ethertype
Valid entry: 0x8100, 0x88a8
Outer VLAN tag list.
outer_ptp-fp-
Valid entry: The format is VID-PRIO (VLAN Identifier-Priority). The
vlanlist
valid values for VID are 0 to 4095 and valid values for PRIO are
empty, and 0 to 7. For example: 1-*,*-2,20-*
Control over untagged traffic.
inner1_untag-crotol
Valid entry: enabled, disabled
PTP Flow Point Outer Ether Type.
inner1_ethertype
Valid entry: 0x8100, 0x88a8
Outer VLAN tag list.
inner1_ptp-fp-
Valid entry: The format is VID-PRIO (VLAN Identifier-Priority). The
vlanlist
valid values for VID are 0 to 4095 and valid values for PRIO are
empty, and 0 to 7. For example: 1-*,*-2,20-*
Control over untagged traffic.
inner2_untag-crotol
Valid entry: enabled, disabled
PTP Flow Point Outer Ether Type.
inner2_ethertype
Valid entry: 0x8100, 0x88a8
Outer VLAN tag list.
inner2_ptp-fp-
Valid entry: The format is VID-PRIO (VLAN Identifier-Priority). The
vlanlist
valid values for VID are 0 to 4095 and valid values for PRIO are
empty, and 0 to 7. For example: 1-*,*-2,20-*

Guidelines
This command is used to create a new PTP Flow Point at an Access Port or Network Port.

Example
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa541x542x-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> add ptp-fp acc_ptp_flow_pt-1-1-1-1-33
monitoring 1000 0 44 none disab
led 0x8100 100
ADVA:ptp-NE-1:nteosa54125422-1-1-1:access-1-1-1-1--> show ptp-fp acc_ptp_flow_pt-1-1-1-1-
33
Alias :

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 147

Oscilloquartz: An ADVA Company Commands Reference

PTP Flowpoint Type : monitoring

COS : 0
CIR : 64000
EIR : 0
Buffer Size : 44
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 100
Inner1 VLAN Ethertype : 0
Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : normal
Admin State : management
Secondary States : act

Related Commands
add ptp-clock-probe ip-version
delete ptp-clock-probe mtie-mask-margin
delete history-result mtie-mask-type
show ptp-clock-probe master-ip-address
show syncjack-telecom-slave name (ne, probe)
show history-result ptp-flowpoint
direction reference, reference-eid
expected-ql slave-ipv4-address

add ptp-network-probe
Create a PTP network probe.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
add ptp-network-probe <ptp_network_probe-eid> <probe-id> <ptp_fp-eid> <ip-version>
<slave-address> <master-address> <reference-eid> <expected_ql-level> <resPDVfwdLowRange>
<resPDVfwdMediumRange> <resPDVfwdHighRange> <resPDVrevLowRange> <resPDVrevMediumRange>
<resPDVrevHighRange> <pdv-limit-assured> <pdv-limit-satisfied>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 148

Oscilloquartz: An ADVA Company Commands Reference

Probe EID
ptp_network_probe-
eid Valid entry: ptp_network_probe-1-n Where:n =
1Example: ptp_network_probe-1-1
Probe ID
probe-id
Valid entry: up to 15 ASCII characters (no
spaces)
The entity identifier of PTP Flow Point. Valid
entry:
ptp_fp-eid
For Access Port: acc_ptp_flow_pt-ne-shelf-nte-
port-n. Where: ne=1, shelf=1, slot=1, port=1,
n=1-m (max ptp flow points). Example: acc_
ptp_flow_pt-1-1-1-3-1.
IP version for this probe.
ip-version
Valid entry: ipv4
The slave address of an SOOC or Syncjack
slave-address probe.
Valid entry: a valid IPv4 address.
The Address of the Master Clock associated
master-address with a SOOC or Syncjack probe.
Valid entry: a valid IPv4 address.
Identifies the reference.
reference-eid
Valid entry: Equipment and Entity Identifier
(EID) Naming Conventions
The Expected Quality Level expected for a
reference supporting SSM.
Valid entry for SDH Network Clock: ql-prc, ql-
expected_ql-level
ssu-a, ql-ssu-b, ql-eec1, ql-none. Default is ql-
none.
Valid entry for SONET Network Clock: ql-prc,
ql-stu, ql-st2, ql-tnc, ql-st3e, ql-eec2, ql-smc,
ql-prov, ql-none. Default is ql-none.
RPDV forward low range.
resPDVfwdLowRange
Valid entry. 1-1 - 4294967295. (must be below
the resPDVfwdMediumRange setting)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 149

Oscilloquartz: An ADVA Company Commands Reference

RPDV forward medium range.

resPDVfwdMediumRange Valid entry. 1-1 - 4294967295. (must be below

the resPDVfwdHighRange setting and above
the resPDVfwdLowRange setting)
RPDV forward high range.
resPDVfwdHighRange
Valid entry. 1-1 - 4294967295.
RPDV reverse low range.
resPDVrevLowRange
Valid entry. 1 - 4294967295. (must be below
the resPDVrevMediumRange setting)
RPDVreverse medium range.

resPDVrevMediumRange Valid entry. 1 - 4294967295. (must be below

the resPDVrevHighRange setting and above
the resPDVrevLowRange setting)
RPDV reverse high range.
resPDVrevHighRange
Valid entry. 1 - 4294967295.
PDV assured value.
pdv-limit-assured
Valid entry: 1 - 4294967295
PDV satisfied value.
pdv-limit-satisfied
Valid entry: 1 - 4294967295

Guidelines
This command is used to create a Syncjack PTP Network Probe.

The PTP Flowpoint defined in the command must have been previously created in
“Configure PTP�?. see "Configure PTP Command Level Summary".

Example:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> add ptp-network-probe ptp_network_probe-1-1
PTPNWProbe1 net_ptp_flow_pt-1-1-1-1-1 ipv4 10.206.206.6 10.206.206.1 gps-1-1-1-1 ql-none
200 500 2000 200 500 2000 25000 150000
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1

Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 150

Oscilloquartz: An ADVA Company Commands Reference

Master Ip Address : 10.206.206.1

Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe
delete ptp-network-probe reference, reference-eid
fpp-cluster-assured rpdv-frw-highrange
fpp-cluster-satisfied rpdv-frw-lowrange
show ptp-network-probe rpdv-frw-mediumrange
expected-ql rpdv-rev-highrange
ip-version rpdv-rev-lowrange
master-ip-address rpdv-rev-mediumrange
name (ne, probe) show ptp-network-probe
pdv-limit-assured show ptp-fp
pdv-limit-satisfied slave-ipv4-address
ptp-flowpoint

add l3-ptp-port
Creates a Layer 3 PTP port when the PTP clock profile is G8275.2.

Command Level

Configure PTP Clock

Syntax
add l3-ptp-port <l3_ptp_port-eid> <alias> [ipv4|ipv6]
[<l3ptpport-ipv4addr>|<l3ptpport-ipv6addr>] <l3ptpport-ipv6addrprefix> <l3ptpport-
ipv4mask> <l3ptpport-ifname> <default-gateway-control> [<ipv4-addr>|<ipv6-addr>]
<l3ptpport-expectedclockclass> <unicast-message-negotiation-control>
<l3ptpport-unicasttimeout> <l3ptpport-unicastrestarttimer>[dscp|none|tos
<l3ptpport-ippriority> <l3ptpport-localpriority>
[<l3ptpport-masteripv4addr>|<l3ptpport-masteripv6addr>]

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 151

Oscilloquartz: An ADVA Company Commands Reference

The entity identifier of the port.

l3_ptp_port-eid
Valid values: l3_ptp_port-1-1-n, where n=1-2.
An alias given to the PTP port.
alias Valid values: character string 0 to 256 characters, no
space, default is null.
The IP protocol of the port.
ipv4/ipv6
Valid values: ipv4 or ipv6.
The IP address of the slave clock.
l3ptpport-ipv4addr
Valid values: valid IPv4 address.
The IP address of the slave clock.
l3ptpport-ipv6addr
Valid values: valid IPv6 address.
IPv4 mask of the slave clock IPv4 address.
l3ptpport-ipv4mask
Valid values: valid IPv4 mask.
The IPv6 prefix of the slave clock IPv6 address.
l3ptpport-ipv6addrprefix
Valid values: valid IPv6 prefix.
Sets the interface name.
l3ptpport-ifname
Valid values: 1 to 15 alphanumeric characters. No spaces.
default-gateway-control Enables or disabled default gateway control.
IPv4 gateway address.
ipv4-addr
Valid values: valid IPv4 address.
IPv6 gateway address.
ipv6-addr
Valid values: valid IPv6 address.
Minimum expected clock class.
l3ptpport-expectedclockclass
Valid values: 0 to 255. Default is 247.
unicast-message-negotiation- Enables or disables unicast messages negotiation. Default
control is disabled.
Sets the next restart of request unicast transmission
l3ptpport-unicasttimeout signaling messages.
Valid values: 1 to 600 seconds.
Sets the next restart of request unicast transmission
l3ptpport-unicastrestarttimer signaling messages.
Valid values: 30 to 1800 seconds.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 152

Oscilloquartz: An ADVA Company Commands Reference

Sets the IP packets priority mode.

dscp/none/tos
Default is none.
Sets the IP packets priority.
l3ptpport-ippriority
Valid values: tos — 1 to 7; dscp — 0 to 63.
Sets local priority.
l3ptpport-localpriority
Valid values: 0 to 255. Default is 128.
IPv4 address of the master clock.
l3ptpport-masteripv4addr
Valid values: valid IPv4 address.
IPv6 address of the master clock.
l3ptpport-masteripv6addr
Valid values: valid IPv6 address.

Examples
IPv4:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> add l3-ptp-port l3_ptp_port-1-1-2 l3port ipv4 1.1.1.2
255.255.255.0 ssss enabled 1.1.1.1 247 enabled 1 60 dscp 0 128 1.1.1.1

IPv6:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> add l3-ptp-port l3_ptp_port-1-1-2 aaa ipv6
0000:0000:0000:0000:0000:0000:0000:0000 0 sss enabled
0000:0000:0000:0000:0000:0000:0000:0000 247 enabled 1 60 dscp 0 128
0000:0000:0000:0000:0000:0000:0000:0000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 153

Oscilloquartz: An ADVA Company Commands Reference

add ptp-port
Creates a PTP Port.

Command Level
Configure PTP Clock

Syntax
add ptp-port <ptp_port-eid> <alias> <not_slave> <ptp-port-local-priority> <virtual-port-
control><ptp_fp-eid> <dest_mac_addr_type> <sync_message_rate> <del_req_message_rate>
<announce_message_rate> <announce_recpt_timeout> <sync_recpt_timeout> <delay_resp_
timeout> <master_clock_type><ptp-port-isprobingslave><ptp-port-min-exp-clk-cls>

The Entity Identifier of the PTP port.

ptp_port-eid
Valid values: ptp_port-1-1-n, where n=1-2.
An alias given to the PTP port.
alias Valid values: character string 0 to 256 characters, no space,
default is null.
This attribute is applicable for PTPPort if PTPClock profile
master_only isG8275_1 and PTPClockType is Boundary-Clock or Static BC.
Valid values: enabled or disabled.
ptp-port-local-priority Local Priority (based on IEEE 1588v2).
Enables or disables virtual port.
Valid values: enabled or disabled.
virtual-port-control
l When enabled, configure ptp-port-min-exp-clk-cls
l When disabled you must configure additional attributes.
The PTP flow point to associated with. This PTP Flow Point
must have a type Eth Multicast.
Valid values:
ptp_fp-eid
For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-n.
Where: ne=1, shelf=1, slot=1, port=1, n=1-m (max ptp flow
points). Example: acc_ptp_flow_pt-1-1-1-3-1.
Destination MAC Address type.
dest_mac_addr_type
Valid values: forwardable, non-forwardable.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 154

Oscilloquartz: An ADVA Company Commands Reference

Synchronization message rate.

Valid values: 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-per-sec,
sync_message_rate
2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-per-
sec, 8-pkt-per-sec
Delay Request message rate.
Valid values: 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-per-sec,
del_req_message_rate
2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-per-
sec, 8-pkt-per-sec
Announce message rate.
Valid values: 1-pkt-per-1-sec, 1-pkt-per-16-sec, 1-pkt-per-2-
announce_message_rate
sec, 1-pkt-per-4-sec, 1-pkt-per-8-sec, 2-pkt-per-1-sec, 4-
pkt-per-1-sec, 8-pkt-per-1-sec
Announce Receipt Timeout.
announce_recpt_timeout
Valid values: 2-128
Sync Receipt Timeout.
sync_recpt_timeout
Valid values: 2-128
Delay Receipt Timeout.
delay_resp_timeout
Valid values: 2-128
master_clock_type Master Clock Type. Valid entry: one-step,Two-Step
Enable or Disable PTP probing slave as atrophied slave
(under PTP Clock of type master or slave). This slave
ptp-port-isprobingslave establishes a PTP session with its remote PTP master port but
does not recover its time.
Valid values: enabled, disabled; Default: disabled.
Note: This setting is only applicable for a dynamic or slave
port that is related to a PTP clock, either a boundary clock or
slave clock. Otherwise, this setting is not available to
configure.

Minimum Expected Clock Class, which sets the minimum

ptp-port-min-exp-clk-cls threshold for receiving packets. If the received clock class is
equal or greater than the expected clock class value, the
packets for the grandmaster or boundary clock that are
sending this clock class are dropped. In addition, an alarm
called clock-class-mismatch is generated.
Valid values: 0-255. The default is 247.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 155

Oscilloquartz: An ADVA Company Commands Reference

Examples
PTP port for a virtual port:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-1
<ptp-port-alias>
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-1 dsd
<ptp-port-localpriority>
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-1 dsd 123
disabled
enabled
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-1 dsd 123 enabled
ptp-port-min-exp-clk-cls
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-1 dsd 123 enabled 122

ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1

ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port
Admin State : management
Operational State : normal
Secondary States : act
Alias : dsd
Virtual Port Ctrl : enabled
Local Priority : 123
Expected Clock Class : 122

PTP port for a master clock:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-2 Dallas enabled 128 net_ptp_
flow_pt-1-1-1-1-1 forwardable 16-pkt-per-sec 16-pkt-per-sec 3 8-pkt-per-1-sec 3 3 one-
step disabled
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-port ptp_port-1-1-1
Admin State : management
Operational State : normal
Secondary States : act
Alias : Dallas
Master Clock Type : one-step
Not Slave : Enabled
Peer Port Identity :
Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 156

Oscilloquartz: An ADVA Company Commands Reference

Announce Message Rate : 8-pkt-per-1-sec

Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : Not Available
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 0
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received : 00000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received : 0102002C180000000000000000000000000000000
080EA05001000010000B826017F0000000C2E6F2229831C
Port Identity : 0080ea39d15000010001

PTP port for a slave clock:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> add ptp-port ptp_port-1-1-2 "" 128 acc_ptp_flow_pt-1-1-1-
1-1 non-forwardable 8-pkt-per-sec 8-pkt-per-1-sec 3 8-pkt-per-sec 3 3 disabled 247
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-port ptp_port-1-1-1
Admin State : management
Operational State : outage
Secondary States : act,sgeo
Alias :
Master Clock Type : one-step
Master Only : Enabled
Peer Port Identity : Not Available
Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247
Max Expected L2 Slaves : 1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 157

Oscilloquartz: An ADVA Company Commands Reference

Probing Slave : Disabled

PTP State : master
BMCA Role : m2
Clock Class : 248
Peer MacAddress : Not Available
Last Announce Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Port Identity : 0080eafffe39d3100001

Related Commands
admin-state localpriority
alias min-exp-clk-cls
announce-receipt-timeout show ptp-clock
delay-response-timeout show ptp-port
delete ptp-port sync-receipt-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 158

Oscilloquartz: An ADVA Company Commands Reference

add sooc
Creates a Slave Only Ordinary Clock (SOOC). Once you have created a SOOC, the minimum
expected clock class value can be changed (see min-exp-clk-cls).

Command Level
Configure Telecom Slave

Syntax
add sooc <sooc-eid> <master delay mechanism> <ptp-sooc-mspriority> <master ip version>
<ptp-ts-msipaddr> <ptp-sooc-slaveip> <ptp-sooc-slavemask> <master announce message rate>
<ptp-ts-msannouncereceipttimeout> <master delay response message rate> <sync message
transmission rate> <ptp-sooc-msleaseduration> <ptp-sooc-name> <unicast message
negotiation> <default gateway control> <ipv4-addr> <ptp-sooc-
msdelayresponsereceipttimeout> <ptp-sooc-mssyncreceipttimeout>

Entity Identifier of SOOC.

sooc-eid Valid values: sooc-ne-ts-n, where: ne=1, ts=1, n=1.
Example: sooc-1-1-1
Sets the delay mechanism.
master delay mechanism
Valid entry: end-to-end, peer-to-peer
Sets the master clock priority.
ptp-sooc-mspriority
Valid values: 0-255. The default value is 128.
Sets the master clock IP address type.
master ip version
Valid values: ipv4, ipv6. The default is ipv4.
Sets the master clock IP address to which the slave
ptp-ts-msipaddress clock connects.

Valid values: A valid IPv4 or IPv6 address.

IP address of the slave clock.

ptp-sooc-slaveip Valid values: A valid unicast IPv4 or IPv6 address. The IP

address must be unique across all IP interfaces in the
system.
Network mask for the IPv4 slave clock.
ptp-sooc-slavemask
Valid values: A valid IPv4 mask.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 159

Oscilloquartz: An ADVA Company Commands Reference

The announce message rate used to communicate with

the corresponding master clock. This rate must not
exceed the Max Announce Message Rate configured on
the master clock.
master announce message rate
Valid values: 1-pkt-per-1-sec, 1-pkt-per-16-sec, 1-pkt-
per-2-sec,1-pkt-per-4-sec, 1-pkt-per-8-sec, 2-pkt-per-
1-sec, 4-pkt-per-1-sec, 8-pkt-per-1-sec. Ddefault is 1-
pkt-per-16-sec.
The master clock announce message receipt timeout in
ptp-ts- seconds.
msannouncereceipttimeout
Valid values: 2-255 (seconds). The default is 2.
The master delay response message rate.

master delay response message Valid values: 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-

rate per-sec, 2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec,
64-pkt-per-sec, 8-pkt-per-sec. Default value is 32-pkt-
per-sec.
The master sync message transmission rate.
Valid values: 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-
sync message transmission rate per-sec, 2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec,
64-pkt-per-sec, 8-pkt-per-sec. Default is 32-pkt-per-
sec.
The master lease duration in seconds.
ptp-sooc-msleaseduration
Valid values: 60-1000. The default is 300 seconds.
Name of the SOOC interface.
ptp-sooc-name
Valid entry: a string.
Enables or disables unicast message negotiation.
unicast message negotiation
Valid values: enabled, disabled.
Enables or disables default gateway.
default gateway control
Valid values: enabled, disabled.
ipv4-addr IP address of the gateway.
Optional. The master delay response eeceipt timeout in
ptp-sooc- intervals.
msdelayresponsereceipttimeout
Valid values: 2-255.
Optional. The master sync receipt timeout in intervals.
ptp-sooc-mssyncreceipttimeout
Valid values: 2-255.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 160

Oscilloquartz: An ADVA Company Commands Reference

Examples
Example of creating an IPv4 SOOC:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> add sooc sooc-1-1-1 end-to-end 0 ipv4 1.1.1.1 2.2.2.2
255.255.255.0 1-pkt-per-16-sec 2 32-pkt-per-sec 32-pkt-per-sec 300 sooc1 enabled disabled
4.4.4.4

-or-

ADVA:ptp-NE-1:ts-1-1--> add sooc sooc-1-1-1 end-to-end 0 ipv4 1.1.1.1 2.2.2.2

255.255.255.0 1-pkt-per-16-sec 2 32-pkt-per-sec 32-pkt-per-sec 300 sooc1 enabled disabled
4.4.4.4 128 10 none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 161

Oscilloquartz: An ADVA Company Commands Reference

add static-remote-slave
Create a Precision Time Protocol (PTP) Static Remote Slave.

Command Level
Configure Master Clock Interface

Syntax
add static-remote-slave <srs-eid> <alias> [<ipv4-address>|<ipv6-address>] <uncst-ctl>
[<ams-rate>][<ms-delay-rate>][<syn-rate]

The entity identifier of the Static Remote Slave

srs-eid Valid entry: static_slave-ne-mc/bc-mci-n; Where: ne=1, mc/bc=1,
mci=1, n=1-4 or 1-16.
The name given to the Static Remote Slave.

alias Valid entry: Character string - 0 to 256 characters, no space; Default

is null. Empty string or string containing SPACE must be enclosed in
quotation marks. String consisting of only SPACE is not allowed.
ipv4-address The Remote Slave IPv4 address.
ipv6-address The Remote Slave IPv6 address.
Whether to enable Unicast Negotiation.
uncst-ctl
Valid entry: enabled, disabled. Default is Enabled.
Master Announce Message Rate, which is configurable only when
the <uncst-ctl> is disabled.
ams-rate Valid entry: 1-pkt-per-1-sec,1-pkt-per-16-sec, 1-pkt-per-2-sec,1-
pkt-per-4-sec, 1-pkt-per-8-sec, 2-pkt-per-1-sec, 4-pkt-per-1-sec,
8-pkt-per-1-sec. The default is 1-pkt-per-16-sec.
Master Delay Response Message Rate, which is configurable only
when the <uncst-ctl> is disabled. The Delay Response Message
Rate cannot be greater than the associated MCI Max Response
ms-delay-rate Message Rate.
Valid entry: 0-pkt-per-sec, 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-
per-sec, 2-pkt-per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-per-
sec, 8-pkt-per-sec, none. The default is 32-pkt-per-sec.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 162

Oscilloquartz: An ADVA Company Commands Reference

Sync Message Transmission Rate, which is configurable only when

the <uncst-ctl> is disabled.
syn-rate Valid entry: 1-pkt-per-sec, 128-pkt-per-sec, 16-pkt-per-sec, 2-pkt-
per-sec, 32-pkt-per-sec, 4-pkt-per-sec, 64-pkt-per-sec, 8-pkt-per-
sec; The default is 32-pkt-per-sec.

Guidelines
This command is used to create a Static Remote Slave. To create a Static Remote Slave,
there must be an existing master virtual port. The following parameters are only required
when the Unicast Negotiation is disabled:

l ams-rate
l ms-delay-rate
l syn-rate

Master Announce Message Rate cannot be greater than the associated MCI Max Announce
Message Rate.

Sync Message Rate cannot be greater than the associated MCI Max Sync Message Rate.

Delay Response Message Rate cannot be greater than the associated MCI Max Response
Message Rate.

Examples
Example of creating an IPv4 static remote slave:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> add static-remote-slave static_slave-
1-1-1-1 srs1 110.101.101.101 disabled 1-pkt-per-1-sec 2-pkt-per-sec 1-pkt-per-sec
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show static-remote-slave static_
slave-1-1-1-1
Alias : srs1
Admin State : management
Operational State : outage
Secondary States : sgeo
Time Created : 2017-06-25,10:25:17
Negotiated Announce Lease Duration : 0
Lease Duration Remain Time : 0
Negotiated Delay Resp Lease Duration : 0
Delay Resp Duration Remain Time : 0
Negotiated Sync Lease Duration : 0
Sync Duration Remain Time : 0
Clock Identity : 00000000000000000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 163

Oscilloquartz: An ADVA Company Commands Reference

Unicast Msg Negotiation : disabled

Slave V4 Address : 110.101.101.101
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 2-pkt-per-sec
Sync Msg Rate : 1-pkt-per-sec

Example of creating an IPv6 static remote slave:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> add static-remote-slave static_slave-
1-1-1-1 srs1 2000:4444:3333:2222:1111:0000:0000:000A disabled 1-pkt-per-1-sec 32-pkt-per-
sec 32-pkt-per-sec
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show static-remote-slave
static_slave-1-1-1-1

Alias : srs1
Admin State : management
Operational State : outage
Secondary States : act,sgeo
Time Created : 2017-06-25,09:25:17
Negotiated Announce Lease Duration : 0
Lease Duration Remain Time : 0
Negotiated Delay Resp Lease Duration : 0
Delay Resp Duration Remain Time : 0
Negotiated Sync Lease Duration : 0
Sync Duration Remain Time : 0
Clock Identity : 00000000000000000000
Unicast Msg Negotiation : disabled
Slave V4 Address : Not Available
Slave V6 Address : 2000:4444:3333:2222:1111:0000:0000:000A
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 32-pkt-per-sec
Sync Msg Rate : 32-pkt-per-sec

Related Commands
alias admin-state
show static-remote-slave delete static-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 164

Oscilloquartz: An ADVA Company Commands Reference

add syncref
Add an entry to the Sync Reference list. Two entries are allowed. To change a syncref, the
existing reference must be deleted using delete syncref first. To get available references,
type in “?. For any interface to appear in the Sync Reference Sources list, it must have Sync-E
Mode enabled and the interface must not be Unassigned.

If the Network Port / Access Port is configured as a 1000Base-T electrical interface, then it
must be configured as “Auto 1000 Full Slave to be selectable as a Sync Reference.

Security Level
Provisioning

Command Level
Configure Sync

Syntax
add syncref <syncref-number> <priority> <reference_port-eid>

The number assigned to an available syncref

syncref-number
interface eid (ref-eid). Valid entries are 1 to 255.
priority Sync Reference Priority. Valid entries are 1-10.
The Entity Identifier of the Interface Port that is being
used as the syncref.
reference_port-
eid Valid entry: Equipment and Entity Identifier (EID)
Naming ConventionsEquipment and Entity Identifier
(EID) Naming Conventions

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> add syncref 1 1 clk-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias :
Priority : 1
Source : clk-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : unavailable
Effective QL : ql-failed

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 165

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 166

Oscilloquartz: An ADVA Company Commands Reference

add target-address
Create a new SNMP Target Address Entry. Use the delete target-address command to
remove a Target Address Entry.

Security Level
Provisioning

Command Level
Configure SNMP

Syntax
add target-address <address-name> [<ipv4-address>|<ipv6-address>] <ip-version> <timeout>
<retry> <taglist> <name> <dying-gasp>

A character string representing the SNMP Target

address-name Address Name.
Valid entry: Character string -1 to 64 characters.
The IPv4 address and port of the Traphost to be
associated with this Target Address Entry.
ipv4-address
Valid entry: Valid IPv4 address and Port. Example,
10.10.10.10:8080.
The IPv6 address and port of the Traphost to be
associated with this Target Address Entry.

ipv6-address Valid entry: A valid IPv6 Unicast Address with Port

delimited by colon. The IPv6 address must be
enclosed in square brackets. Example,
[1111:a3:0:0:0:0:0:2222]:5555.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 167

Oscilloquartz: An ADVA Company Commands Reference

The default time for the system to wait before an

Info message is acknowledge. In case the Info
message is not acknowledged, the SNMP Agent
resends it.
The value entered should reflect the expected
maximum round trip time for communicating with
timeout the transport address (traphost). An application can
choose to override the default timeout.
This attribute is only relevant when the Tag List is set
to Info. It is irrelevant when the Tag List is set to Trap.
Valid entry: number (in 1/100 seconds). The default
is 1500 (1/15 second).
The default number of reattempts by the system to
resend an Info message in case of a timeout.
An application may provide its own retry count, in
retry which case the Retry Count setting is overridden.
This attribute is only relevant when the Tag List is set
to Info. It is irrelevant when the Tag List is set to Trap.
Valid entry: 0 to 3. The default is 3.
Specify how the device communicated with the
remote Network Manager, which must match a
taglist Notify Tag in the Notify Entry Table.
Valid entry: info or trap
Must match a Parameter Name in the Target
Parameter Entry table.
name
Valid entry: Character string - 1 to 64 characters. The
acceptable characters are: a-z, A-Z,0-9,.,- and _.

Guidelines
Create a new SNMP Target Address Entry. The Target Parameter Entry must first be created
by using the add target-params command.

Trap vs Info:

Both Trap and Info are the SNMP messages to indicate a fault, exception or an attribute
value change but they are different in these ways:

l For Trap PDU, the type field has a value of 0xA4; for Info PDU, the type field has a
value of 0xA6. Traps are further categorized into generic (standard) and specific
(vendor-defined) traps.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 168

Oscilloquartz: An ADVA Company Commands Reference

l A SNMP manager acknowledges with a SNMP PDU for a Info message it receives,
but not Trap message. The SNMP Agent resends the Info message if it is not
acknowledged before Timeout.
l A Trap is sent from agent to manager, whereas informs can be sent from one
manager to another.
l Trap is supported in SNMPV1, SNMPV2C and SNMPV3; Info is only supported in
SNMPV2C and SNMPV3.

Examples:
Example of adding an IPv4 Target Address:

ADVA--> configure snmp

ADVA:snmp--> add target-address TA1 10.10.10.10:8100 ipv4 info 15 3 TA disabled
ADVA:snmp--> show target-address TargetAddr1
Target Address Name : TA1
Transport Address : 10.10.10.10:8100
Timeout : 15
Retry Count : 3
Tag List : info
Target Params Name : TA
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled

Example of adding an IPv6 Target Address:

ADVA--> configure snmp

ADVA:snmp--> add target-address TA2 [2444:0000:0000:0000:0000:0000:0000:000B]:64 ipv6 5 3
trap TA disabled
ADVA:snmp--> show target-address TA2
Target Address Name : TA2
Transport Address :
[2444:0000:0000:0000:0000:0000:0000:000B]:64
Timeout : 5
Retry Count : 3
Tag List : trap
Target Params Name : TA
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 169

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 170

Oscilloquartz: An ADVA Company Commands Reference

add target-params
Create a new Target Parameters Entry. Use the delete target-params command to remove a
Target Parameters Entry.

Security Level
Provisioning

Command Level
Configure SNMP

Syntax
add target-params <name> <mp-model> <sec-model> <sec-name> <sec-level>

A character string representing the SNMP Target

name Parameters Name.
Valid entry: Character string - 0 to 64 characters
The Message Processing Model to be used when
mp-model generating SNMP messages using this entry.
Valid entry: snmpv1, snmpv2c, snmpv3
The Security Model to be used when generating
sec-model SNMP messages using this entry.
Valid entry: snmpv1, snmpv2c, usm
The Security Name to be used when generating
SNMP messages using this entry.
sec-name
Valid entry: Valid existing Community Name.
Character string - 0 to 256 characters
The Security Level to be used when generating
sec-level SNMP messages using this entry.
Valid entry: auth-no-priv, auth-priv, no-auth

Guidelines
Create a new Target Parameters Entry. The Community Name must first be created by using
the add community command.

Examples
ADVA--> configure snmp
ADVA:snmp--> add target-params GoForIt snmpv2c snmpv2c TestOne noauth
ADVA:snmp--> show target-params GoForIt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 171

Oscilloquartz: An ADVA Company Commands Reference

Target Params Name : GoForIt

Message Processing Model : snmpv2c
Security Model : snmpv2c
Security Name : TestOne
Security Level : no-auth

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 172

Oscilloquartz: An ADVA Company Commands Reference

add telecom-slave
Create a Telecom Slave (TS)

Security Level
Provisioning

Command Level
PTP Network Element

Syntax
add telecom-slave <ts-eid> <sync-ref-control> <ql-mode> <clock-id> <netclock_type>
[<expected-ql-level>] [<assumed-ql-level>] [<domain-number>] [<time-ho-accuracy>]
[<sync-ref>]

The entity Identity of the Telecom Slave.

ts-eid Valid entry: ts-ne-n. Where: ne=1, n=1. Example: ts-
1-1.
Enable or disable use of this Telecom Slave as a sync
sync-ref-control reference.
Valid entry: enabled, disabled.
Whether to enable or disable QL mode.
ql-mode
Valid entry: enabled, disabled.
The unique Identifier for the PTP Clock.
Valid entry: A 16-digit hex number which is unique
clock-id System-wide. The default value: <DCN MAC
Address> <Unique Number> Example:
0080ea2202100002
The network clock type, SDH or SONET.
netclock_type
Valid entry: option1-sdh, option2-sonet
Expected QL level.
expected-ql-level
Valid entry: A supported QL level
Assumed QL level.
assumed-ql-level
Valid entry: A supported QL level

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 173

Oscilloquartz: An ADVA Company Commands Reference

Assigned PTP domain level.

domain-number
Valid entry: 0 to 255.
time-ho- Time Holdover Accuracy.
accuracy Valid entry: 1000, 10000, 1500, 500, 5000
If “sync-ref-control" is disabled, the EID of the Sync
sync-ref Ref used.
Valid entry: sync-1-1-1-1 or none

Guidelines
This command is used to Create a Telecom Slave (TS). There can be at most one telecom
slave at one Network Element.

If Sync Reference is disabled, QL Mode is disabled.

Clock Type is determined by the network-clock-type command, only the value set by that
command is available here.

Expected QL Level is optional, if not entered, QL Level is set to “ql-none".

Assumed QL Level is optional, if not entered and QL Mode is disabled, QL Level is set to “ql-
eec1", if QL Mode is enabled, QL Level is set to “ql-none".

Domain Number is optional, if not entered it is set to “0".

Sync Ref is optional, only entered if “sync-ref-status" is set to disabled. If not entered the
default is “sync-1-1-1-1".

The System feature PTP-MC/BC must be enabled prior to creating a Telecom Slave. See
configure feature.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> add telecom-slave ts-1-1 disabled disabled 0080ea2fc0700000 option1-sdh
ql-none ql-prc 2 5000 sync-1-1-1-1
ADVA:ptp-NE-1--> show telecom-slave ts-1-1

Alias : TS1
Clock Identity : 0080ea33b0a00000
Operational State : normal
Admin State : in-service
Secondary States : act
Sync Reference Mode : enabled
QL Mode : disabled
Sync ID : sync-1-1-1-1
PTP Domain Number : 2
Clock Recovery Mode : two-way
Clock Recovery State : normal
Network Clock Type : option2-sonet

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 174

Oscilloquartz: An ADVA Company Commands Reference

Assumed QL : ql-stu
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : 2014-02-25,22:06:30
Time Holdover Accuracy (ns) : 5000

Related Commands
add telecom-slave expected-ql
admin-state network-clock-type
alias ql-mode
assumed-ql show alarm-attributes
clock-recovery-mode squelch-ctrl
sync-id squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 175

Oscilloquartz: An ADVA Company Commands Reference

add timeref
Add a time clock reference. In PRTC mode, you can add up to three references.

Command Level
Configure Time Clock

Syntax
add timeref <timeRefNum> <priority> [<clk-eid> | <gps-port-eid> | <mb_gnss-eid> | ptp_
clock-eid | <sync-eid> | <ts-eid>]

The number of the Time Reference.

timeRefNum
Valid entry: 1.
The Priority given to the Time Reference.
priority
Valid entry: 1-10.
The clock port entity identifier to be used as time reference.
clk-eid
Valid values: clk-ne-shelf-aux-n, where: ne=1, shelf=1, aux=1, n=1.
The GPS port entity identifier to be used as time reference.
Valid Entry: gps-ne-shelf-nte-n, where: ne=1, shelf=1, nte=1,
n=1.Example: gps-1-1-1-1gps-ne-shelf-nte-n, where: ne=1,
gps-eid shelf=1, nte=1, n=1.Example: gps-1-1-1-1gps-ne-shelf-nte-n,
where: ne=1, shelf=1, nte=1, n=1.Example: gps-1-1-1-1gps-ne-
shelf-nte-n, where: ne=1, shelf=1, nte=1, n=1.Example: gps-1-1-1-
1
The PTP clock entity identifier.
ptp_clock-eid
Valid values: ptp_clock-ne-n, where ne-1, n=1-201.
The Sync entity identifier to be used as time reference.
sync-eid Valid Entry: sync-ne-shelf-nte-n. Where: ne=1, shelf=1,nte=1, n=1.
Example: sync-1-1-1-1
The Telecom Slave entity identifier used as time reference.
ts-eid
Valid Entry: ts-ne-n. Where: ne=1, n=1. Example: ts-1-1.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> add timeref 2 2 ts-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-2

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 176

Oscilloquartz: An ADVA Company Commands Reference

Alias :
Priority : 2
Source : ts-1-1
Status : ref-ok
State : standby

Related Commands
delete timeref show gps-port
show sync show telecom-slave
show timeref

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 177

Oscilloquartz: An ADVA Company Commands Reference

add usm-user
Create a new User-based Security Model (USM) User.

Security Level
superuser

Command Level
Configure SNMP

Syntax
Add a no-auth USM user:

add usm-user <name> <engine-id> <sec-name> <access> no-auth

Add an auth-no-priv USM user:

add usm-user <name> <engine-id> <sec-name> <access> auth-no-priv <auth-protocol> <auth-

key>

Add an auth-priv USM user:

add usm-user <name> <engine-id> <sec-name> <access> auth-priv <auth-protocol> <priv-

protocol> <auth-key> <priv-key>

A human readable string representing the name of

name the USM user.
Valid entry: Character string - 0 to 64 characters
A Simple Network Management Protocol (SNMP)
engine's administratively-unique identifier. In a
simple agent, this value is always that agent own
engine-id snmpEngineID value.
Valid entry: Character string - 5 to 32 characters.
Enter ‘local’ for Local Engine ID or full remote Engine
ID.
Security Name. A human readable string
representing the USM user in Security Model
sec-name independent format.
Valid entry: Valid existing Community Name.
Character string - 0 to 256 characters

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 178

Oscilloquartz: An ADVA Company Commands Reference

The SNMP Access type support for this USM user.

access
Valid entry: access-none, readonly, readwrite
The Security Level associated with this usm user.
sec-level
Valid entry: auth-no-priv, auth-priv, no-auth
The Authentication Protocol support for this USM
user. An indication of whether messages sent on
behalf of this user to/from the SNMP engine
identified by USM User Engine ID, can be
auth-protocol authenticated, and if so, the type of Authentication
Protocol which is used.
Valid entry: md5, sha1; This option is only applicable
if sec-level is set to auth-priv or auth-no-priv.
The Privacy Protocol support for this USM user. An
indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
USM User Engine ID, can be protected from
priv-protocol disclosure, and if so, the type of Privacy Protocol
which is used.
Valid entry: aes, des; This option is only applicable if
sec-level is set to auth-priv.
The Authentication Key for this USM user.

auth-key Valid entry: Character string - 8 to 32 alpha-numeric

characters; only applicable if sec-level is set to auth-
priv or auth-no-priv.
The Privacy Key for this USM user.

priv-key Valid entry: Character string - 0 to 128 characters;

This option is only applicable if sec-level is set to
auth-priv.

Guidelines
Create a new USM User. Four pre-configured SNMP user accounts are provided as default:
“ADMIN,” “MONITOR,” “OPERATOR” and “PROVISION”.

Example:
ADVA--> configure snmp
ADVA:snmp--> add usm-user McCracken 0x800009f004414456415353303733363030303233 secret
readwrite no-auth
ADVA:snmp--> show usm-user McCracken 0x800009f004414456415353303733363030303233

User Name : McCracken

User Engine Id : 0x800009f004414456415353303733363030303233

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 179

Oscilloquartz: An ADVA Company Commands Reference

User Security Name : secret

User Auth Protocol : no-auth-protocol
User Priv Protocol : no-priv-protocol
User Access Type : readwrite
User Auth Key : *****
User Priv Key : *****
User Security Level : no-auth

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 180

Oscilloquartz: An ADVA Company Commands Reference

admin-state
Set the administration state of the specified entity.

Security Level
Provisioning

Command Level
Configure 10MHZ Port

Configure Access Port

Configure bitsx8Group

Configure BITS In / Out

Configure Boundary Clock

Configure DCN

Configure Dynamic Remote Slave

Configure GPS Port

Configure Line Card

Configure Master Clock

Configure Master Clock Interface

Configure Master Virtual Port

Configure NTE

Configure PPS Port

Configure PSU

Configure PTP Clock

Configure PTP Flow Point

Configure PTP Port

Configure NTP

Configure Line Card

Configure NCI

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 181

Oscilloquartz: An ADVA Company Commands Reference

Configure Static Remote Slave

Configure Sync

Configure Telecom Slave

Configure Time Clock

Configure TOD Port

admin-state <state>

The Administrative state to set for this entity.

Valid entry: For Ports: in-service, management,
state maintenance, disabled, unassignedFor Shelf,
Equipment, Flows and QoS Shapers: in-service,
management

Guidelines
This command is used to set the administration state associated with the specified entity.
For valid entity identifiers, see Equipment / Entity IDs .

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> admin-state management
ADVA:ptp-NE-1:ts-1-1--> show ts
Alias : doctest
Clock Identity : 0080ea2fc0700000
Operational State : outage
Admin State : management
Secondary States : sgeo
Sync Reference Mode : disabled
QL Mode : disabled
Sync : sync-1-1-1-1
PTP Domain Number : 0
Clock Recovery Mode : two-way
Clock Recovery State : freerun
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 182

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
alias
list sys-resource
show 10mhz-port show mci
show access-port show ne-conditions
show alarms show nte
show audit-log show pps-port
show bits-in show psu
show bits-out show ptp-clock
show bitsx8_group show ptp-fp
show boundary-clock show ptp-port
show conditions show sooc
show dcn show static-remote-slave
show dynamic-remote-slave show sync
show gps-port show telecom-slave
show <linecardtype> show tod-port
show master-clock
show master-virtual-port

advance-interference-detection
Activates advanced jamming and spoofing detection. To enable, you must:

l Enable the Advance-Interference-Detection license in configure feature.

l Select GPS for one of the GNSS system types.

Command Level
configure gps-port

Syntax
advance-interference-detection <disabled|enabled>

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa542-1-1-1
ADVA-NE-1:nteosa5412-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> advanced-interference-detection enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 183

Oscilloquartz: An ADVA Company Commands Reference

alarm-attributes
Configures the alarm attribute associated with a specific condition type and service affect
pairing. Use the show alarm-attributes command or refer to Alarms and Conditions for
valid condition type, service affect and notification codes.

Command Level
Configure System

Syntax
alarm-attributes <sys-eid> <cond-type> <srv-aff> <notif-code>

Identifies the System Entity for which the Alarm Attributes are to be
set. Available selections are displayed by typing a “?".
Valid values: 10mhz-port, 3g-dcn, access-port, aux, bits-in-port,
sys-eid bits-out-port, bits-x16, clk-x16, clock-probe, dcn-port, irig-b, gps-
port, nci, nteOSA 5422, ntp-clock, pps-port, pps-x16, psu, ptp-
clock, ptp-clock-probe, ptp-mci, ptp-network-probe, ptp-port,
shelf-nteOSA 5422, sooc, sync, system, telecom-slave, time-clock,
time-of-day-port, ge-4s, tod-pps-x16.
Identifies the Condition Type for which the Notification Code is to
be modified. Available selections are displayed by typing a “?".
cond-type
Valid entry: See Alarms and Conditions or use the show conditions
command.
Indicates if this Notification Code change is to be associated with
the Service Affecting or Non-Service Affecting version of this
srv-aff Condition Type. Available selections are displayed by typing a “?".
Valid entry: nsa, sa
Identifies the new Notification Code value. Available selections are
notif-code displayed by typing a “?".
Valid entry: cl, cr, mj, mn, na, nr

Examples
ADVA:system--> alarm-attributes 10mhz-port ?
freq-offset Enter the Condition Type
los Enter the Condition Type
ql-squelch Enter the Condition Type
syncref Enter the Condition Type
syncref-forced-switch Enter the Condition Type
syncref-locked-out Enter the Condition Type
syncref-manual-switch Enter the Condition Type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 184

Oscilloquartz: An ADVA Company Commands Reference

syncref-wtr Enter the Condition Type

ADVA:system--> alarm-attribute 10mhz-port los

nsa Enter the Service Affecting
sa Enter the Service Affecting

ADVA:system--> alarm-attribute 10mhz-port los sa ?

cr Enter new Severity
mj Enter new Severity
mn Enter new Severity
na Enter new Severity
nr Enter new Severity

ADVA:system--> alarm-attributes 10mhz-port los sa cr

Related Commands
show alarms, show conditions, show ne-conditions

alarms-while-failure-suspend
Configures how the GNSS port handles alarms during failure suspend time.

Command Level
configure gps-port

Syntax
alarms-while-failure-suspend <control>

l enabled - the GNSS port reports alarms as usual during failure suspend
time.
control
l disabled - the GNSS port does not report alarms during failure suspend
time.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5412-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> alarms-while-failure-suspend disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 185

Oscilloquartz: An ADVA Company Commands Reference

alias
Edit the alias for this entity.

Syntax
alias <alias>

For Equipment: A character string (0 to 64 characters) representing

the Alias of the entity.
Valid entry: Character string - 0 to 64 characters, no spaces; Default
alias is null.
For Facility: Character string - 0 to 256 characters, no space; Default
is null. Empty string or string containing SPACE must be enclosed in
quotation marks. String consisting of only SPACE is not allowed.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> alias doctest1
ADVA:ptp-NE-1:ts-1-1--> show telecom-slave
Alias : doctest1
Clock Identity : 0080ea2fc0700000
Operational State : outage
Admin State : management
Secondary States : sgeo
Sync Reference Mode : disabled
QL Mode : disabled
Sync : sync-1-1-1-1
PTP Domain Number : 0
Clock Recovery Mode : two-way
Clock Recovery State : freerun
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : Not Available

Related Commands
name (ne, probe)
sync-ref-alias
sync-alias

alias-port-n
Configures an alias to the specified port number in the 8xBITS Group of a BITSx16 line card.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 186

Oscilloquartz: An ADVA Company Commands Reference

Command Level
configure bitsx8_group_enhanced

Syntax
alias-port-n <string>

The port number: 1 to 8 in bitsx8_group_enhanced-1-1-1-1,

n
9 to 16 in bitsx8_group_enhanced-1-1-1-2.
string The alias for this port. Up to 256 characters.

Example
ADVA--> network-element ne-1
ADVA-NE-1-->
ADVA-NE-1--> configure bitsx16p bitsx16p-1-1-1
ADVA-NE-1:bitsx16p-1-1-1-->
ADVA-NE-1:bitsx16p-1-1-1--> configure bitsx8_group_enhanced bitsx8_group_enhanced-1-1-1-1
ADVA-NE-1:bitsx8_group_enhanced-1-1-1-1-->
ADVA-NE-1:bitsx8_group_enhanced-1-1-1-1--> alias-port-2 portnumbertwo

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 187

Oscilloquartz: An ADVA Company Commands Reference

announce-receipt-timeout
Configure Announce Receipt Timeout of a PTP Port in seconds.

Security Level
Provisioning

Command Level
Configure PTP Port

Syntax
announce-receipt-timeout <msg-rate>

Announce Receipt Timeout in seconds.

msg-rate
Valid entry: 2-128

Guidelines
This command is used to configure the Announce Receipt Timeout of a PTP Port.

Example:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> announce-receipt-timeout 3
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port
Admin State : management
Operational State : outage
Secondary States : act,sgeo
Alias :
Master Clock Type : one-step
Master Only : Enabled
Peer Port Identity: Not Available
Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 188

Oscilloquartz: An ADVA Company Commands Reference

Max Expected L2 Slaves : 1

Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 248
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received : 00000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000
Last Sync Message Received : 00000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000
Last Delay_Resp Message Received : 00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000
Last Delay-Req Message Received : 0102002C180000000000000000000000000000000
080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

Related Commands
add ptp-port localpriority
admin-state min-exp-clk-cls
alias show ptp-clock
delay-response-timeout show ptp-port
delete ptp-port sync-receipt-timeout

assumed-clock-class
Configures the clock class for PPS port.

Command Level
Configure PPS Port

Syntax
assumed-clock-class <integer>

The clock class.

integer
Valid values: 6, 7, 140, 150, 160, 248. The default is 6.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure aux aux-1-1-1
ADVA-NE-1:aux-1-1-1--> configure pps-port pps-1-1-1-1
ADVA-NE-1:pps-1-1-1-1--> assumed-clock-class 7

ADVA-NE-1:pps-1-1-1-1--> show pps-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 189

Oscilloquartz: An ADVA Company Commands Reference

Admin State : unassigned

Operational State : outage
Alias :
Signal Direction type : input
Squelch Control : never
Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 0
Source Eid : gps-1-1-1-1
Assumed Clock Class : 7

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 190

Oscilloquartz: An ADVA Company Commands Reference

assumed-ql
Set the Assumed Quality Level for the specified interface. Only effective if the QL Mode for
the interface is set to enabled and the Network Clock type is set to SDH. Choices available
depend on the network-clock-type.

Command Level
Configure Access Port

Configure BITS In

Configure Telecom Slave

Configure CLK

Configure PTP Clock

Syntax
assumed-ql <ql-level>

The Quality Level assumed for a reference not supporting SSM.

Valid entry for SDH Network Clock:
ql-prc, ql-ssu-a, ql-ssu-b, ql-eec1. Default is ql-eec1.
ql-level
Valid entry for SONET Network Clock: ql-stu
Valid entry for Telecom Slave: ql-eec1, ql-none, ql-prc, ql-ssu-a, ql-
ssu-b

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-in bits_in-1-1-1-1
ADVA-NE-1:bits_in-1-1-1-1--> assumed-ql ql-ssu-a
ADVA-NE-1:bits_in-1-1-1-1--> show bits-in
Alias : FantasticSam
Admin State : unassigned
Operational State : Not Available
Secondary State : Not Available
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-g7039-crc4
SA Bit : bit4
QL Mode : enabled
Assumed QL : ql-ssu-a
Expected QL : ql-prc
Received QL : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 191

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
sa-bit
admin-state
show alarm-attributes
alias
show bits-in
bits-line-type
show bits-out
clock-recovery-mode
show ptp-clock
expected-ql
show telecom-slave
frame-format (bits)
squelch-ctrl
line-code
squelch-ql
network-clock-type
sync-id
ql-mode
sync-ref-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 192

Oscilloquartz: An ADVA Company Commands Reference

auth-protocol
Configures the remote authentication protocol type of the system.

Command Level
Configure User Security

Syntax
auth-protocol <protocol>

The type of remote authentication protocol to be used by the

protocol system.
Valid entry: radius, tacacs. Default is none.

Examples
ADVA--> configure user-security
ADVA:user-sec--> auth-protocol none
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 193

Oscilloquartz: An ADVA Company Commands Reference

auth-traps
Enable or Disable SNMP Authentication Traps.

Security Level
Provisioning

Command Level
Configure System

Syntax
auth-traps <control>

Enable or Disable SNMP Authentication Traps.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable SNMP Authentication Traps. If enabled, SNMP
Authentication traps will be sent to the configured trap server.

Examples
To Enable SNMP Authentication Traps:

ADVA--> configure system

ADVA:system--> auth-traps enable
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : enabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 194

Oscilloquartz: An ADVA Company Commands Reference

Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 195

Oscilloquartz: An ADVA Company Commands Reference

auth-type
Change the protocol type used for the Remote Authentication Protocol.

Security Level
superuser

Command Level
Configure User Security

Syntax
auth-type <type>

Configure the Security protocol used when accessing

type the Remote Authentication Server. Valid entry: chap,
pap; Default is chap.

Guidelines
This command is used to change the protocol type used for the Remote Authentication
Protocol. The supported values are: pap - Password Authentication Protocol, and chap -
Challenge-Handshake Authentication Protocol This parameter is only relevant if the
Authentication Protocol is set to a value other than remote-auth-none.

Examples
ADVA--> configure user-security
ADVA:user-sec--> auth-type pap
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 196

Oscilloquartz: An ADVA Company Commands Reference

.....User Privilege Management

.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol
regenerate-ssl-certificate
auth-type
security-strength
config-ssl-strength
security-trap-type
config-user <user-id> cli-paging
show active-ssl-certificate
config-user <user-id> comment
show all-users
config-user <user-id> login-
show local-user
timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show security-system
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address
regenerate-ssh-keys

auto-diagnostic
Enables or disables automatic cable test when the cable is removed from a copper port.

Command Level
Configure Access Port

Syntax
auto-diagnostic <control>

control Valid values: enabled or disabled. Default is enabled.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure xge-4s-p xge_4s_p-1-1-3
ADVA-NE-1:xge_4s_p-1-1-3--> configure access-port lc_access-1-1-3-1
ADVA-NE-1:lc_access-1-1-3-1-->
ADVA-NE-1:lc_access-1-1-3-1--> auto-diagnostic enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 197

Oscilloquartz: An ADVA Company Commands Reference

backup-db
Create a backup of the system database.

Security Level
Provisioning

Command Level
Admin Database

Syntax
backup-db

Guidelines

This command is used to take a snapshot of the database. The file is stored locally on the
System in volatile storage. In order to ensure that the backup can be used in the future, it
should be transferred to a backup server by using the transfer-file command.

Database backup is not allowed if a software upgrade is in progress.

Examples
ADVA--> admin database
ADVA:database--> backup-db
ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

Related Commands
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 198

Oscilloquartz: An ADVA Company Commands Reference

backup-server
Configure the IP address of the backup Network Time Protocol (NTP) Server.

Security Level
Provisioning

Command Level
NTP Client

Syntax
backup-server <ip-version>[<ipv4-address>|<ipv6-address>]

The IPv4 address of the Backup NTP Server.

ipv4-address
Valid entry: Valid IPv4 address.
The IPv6 address of the Backup NTP Server.
ipv6-address
Valid entry: Valid IPv6 address.
The version of the IP address to be used.
ip-version
Valid entry: ipv4, ipv6.

Guidelines
This command is used to configure the IP address of the backup NTP Server. Setting this
address to 0.0.0.0 disables this server from being used.

Examples
ADVA--> configure system
ADVA:system--> ntp-client
ADVA:system:ntp_client--> backup-server 193.204.114.232
ADVA:system:ntp_client--> show ntp-client

Primary Server IP Version : ipv4

Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : primary
Round-trip delay to NTP server (micro secs) : 258
NTP server precision (micro secs) : 1000001

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 199

Oscilloquartz: An ADVA Company Commands Reference

Polling interval (seconds) : 16

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

bits-active-ports
Enables or disables active ports in the 8xbits group.

Security Level
Provisioning

Command Level
Configure bitsx8_group

Syntax
bits-active-ports <control,control,control,control,control,control,control,control>

Each control enables or disables the corresponding

control port in an 8xbits group.
Valid values: enabled or disabled; default is enabled.

Examples
At the network element level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure bitsx16p bitsx16p-1-1-1
ADVA-NE-1:bitsx16p-1-1-1--> show bitsx8_group_enhanced bitsx8_group_enhanced-1-1-1-1
Alias :
Admin State : management
Operational State : normal
Secondary State : act
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-dnu
Line Build Out : none
Line Impedance : 120-ohm
Active Ports : enabled,enabled,enabled,enabled,enabled,enabled,enabled,enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 200

Oscilloquartz: An ADVA Company Commands Reference

At the configure bitsx8_group level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure bitsx8_group_enhanced bitsx8_group_enhanced-1-1-1-1
ADVA-NE-1:bitsx8_group_enhanced-1-1-1-1--> bits-active-ports disabled,enabled,...

Related Commands
admin-state
show bitsx8_group
alias
show <linecardtype>
bits-line-type

bits-clock-ports
Configures the signal of each port in the BITS group. The line type (bits-line-type) for the
BITS group must be set to E1.

Command Level
Configure bitsx8_group

Syntax
bits-clock-ports <clock-ports-list>

Sets the signal for each port:

clock-ports-list enabled - 2048 kHz
disabled - E1

Examples
ADVA-NE-1--> configure bitsx16p bitsx16p-1-1-1
ADVA-NE-1:bitsx16p-1-1-1--> configure bitsx8_group_enhanced bitsx8_group_enhanced-1-1-1-1
ADVA-NE-1:bitsx8_group_enhanced-1-1-1-1--> bits-clock-ports
enabled,enabled,disabled,disabled,disabled,disabled,disabled,disabled

ADVA-NE-1:bitsx8_group_enhanced-1-1-1-1--> show bitsx8_group_enhanced

Alias :
Admin State : management
Operational State : normal
Secondary State : act
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-dnu
Line Build Out : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 201

Oscilloquartz: An ADVA Company Commands Reference

Line Impedance : 120-ohm

Active Ports : enabled,enabled,disabled,disabled,disabled,disabled,
disabled,disabled
Clock Signal Enabled Ports : enabled,enabled,disabled,disabled,disabled,disabled,
disabled,disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 202

Oscilloquartz: An ADVA Company Commands Reference

bits-line-impedance
Set the BITS Group Line Impedance.

Security Level
Provisioning

Command Level
Configure bitsx8_group

Syntax
bits-line-impedance <impedance>

The desired BITS line impedance for an 8xbits group.

impedance
Valid values: 100-ohm, 120-ohm, 75-ohm.

Enables you to select the desired BITS line impedance for an 8xbits group. The BITS line type
must be consistent with the selected Network Clock Type (network-clock-type). E1 and
2048khz are compatible with option1-sdh, while t1 is consistent with option2-sonet.
Settings should be made in the order of: bits-line-type,bits-line-impedance. For Valid
values, see Equipment / Entity IDs .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure bitsx16 bits_x16-1-1-2
ADVA-NE-1:bits_x16-1-1-2--> configure bitsx8_group bitsx8_group-1-1-1-2-1
ADVA-NE-1:bitsx8_group-1-1-2-1--> bits-line-type e1
ADVA-NE-1:bitsx8_group-1-1-2-1--> bits-line-impedance 120-ohm
ADVA-NE-1:bitsx8_group-1-1-2-1--> show bitsx8_group
Alias :
Admin State : in-service
Operational State : outage
Secondary State : act,sgeo
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-nsupp
Line Build Out : none
Line Impedance : 120-ohm

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 203

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state
show bitsx8_group
alias
show <linecardtype>
bits-line-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 204

Oscilloquartz: An ADVA Company Commands Reference

bits-line-type
Sets the BITS interface line type.

Whether editing the BITS In or the BITS Out, the selected line type is mirrored to the other
BITS interface, regardless of the admin-state of that interface. The BITS line type must be
consistent with the selected network-clock-type. E1 and 2048khz are compatible with
option1-sdh, while T1 is consistent with option2-sonet. Set properties in this order: bits-
line-type, line code, frame-format, sa-bit.

Security Level
Provisioning

Command Level
Configure BITS In/Out

Configure bitsx8_group

Syntax
bits-line-type <linetype>

The BITS line type for either BITS In (BITS port only)
or BITS Out (line bitsx8_group or BITS port). The
linetype selection is applied to both interfaces regardless of
which one is being edited.
Valid entry: e1, t1, 2048khz. Default is e1.

BITS Port Example

ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-in bits_in-1-1-1-1
ADVA-NE-1:bits_in-1-1-1-1--> bits-line-type t1
ADVA-NE-1:bits_in-1-1-1-1--> show bits-in

Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : enabled
Assumed QL : ql-none
Expected QL : ql-none
Received QL : ql-nsupp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 205

Oscilloquartz: An ADVA Company Commands Reference

bitsx8_group Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure bitsx16 bits_x16-1-1-2

ADVA-NE-1:bits_x16-1-1-2--> configure bitsx8_group bitsx8_group-1-1-1-2-1

ADVA-NE-1:bitsx8_group-1-1-1-2-1-->
bits-line-impedance 120-ohm
ADVA-NE-1:8xbits_group-1-1-1-2-1--> show bitsx8_group

Alias :
Admin State : in-service
Operational State : outage
Secondary State : act,sgeo
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-nsupp
Line Build Out : none
Line Impedance : 120-ohm

Related Commands
show alarm-attributes
admin-state
frame-format (bits) show bits-in
alias
line-code show bits-out
assumed-ql
ql-mode show bitsx8_group
bits-line-impedance
sa-bit squelch-ql
expected-ql

broadcast
Enables or disables NTP broadcast messages on the NTP clock interface.

Command Level
configure ntp

Syntax
broadcast <disabled, enabled broadcast-ipv4-addr|broadcast-ipv6-addr>

disabled Disables the broadcast state.

enabled broadcast-ipv4-addr Enables broadcasting for IPv4 address.
enabled broadcast-ipv6-addr Enables broadcasting for IPv6 address.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 206

Oscilloquartz: An ADVA Company Commands Reference

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> config ntp-clock ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1--> nci ntp_clock_interface-1-1-3

For IPv4 address:

ADVA:ntp-NE-1:ntp_clock-1-1:ntp_clock_interface-1-1-3--> broadcast disabled

-or-

ADVA:ntp-NE-1:ntp_clock-1-1:ntp_clock_interface-1-1-3--> broadcast enabled 224.1.1.3 1-

pkt-per-8-sec 2 1234 ntpv4

For IPv6 address:

ADVA:ntp-NE-1:ntp_clock-1-1:ntp_clock_interface-1-1-3--> broadcast disabled

-or-

ADVA:ntp-NE-1:ntp_clock-1-1:ntp_clock_interface-1-1-3--> broadcast enabled

ff05:0000:0000:0000:0000:0000:0000:0003 1-pkt-per-8-sec 2 1234 ntpv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 207

Oscilloquartz: An ADVA Company Commands Reference

buffer-size
Set the buffer size of a management tunnel, PTP flow point, or NTP flow point. Buffer size
can be set from 1 to 2147483647.

Command Level
Configure Management Tunnel

Configure PTP Flow Point

Configure NTP Flow Point

Syntax
buffer-size <buff-size>

Examples
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> buffer-size 32
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

Related Commands
list mgmttnl
add mgmttnl
show mgmttnl

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 208

Oscilloquartz: An ADVA Company Commands Reference

cable-length
Configure the cable length on the GPS port.

Security Level
Provisioning

Command Level
Configure GPS Port

Syntax
cable-length <cable-length>

Length of the antenna cable in meters.

cable-length
Valid entry: 0 to 1000.

Guidelines

This command is used to configure the antenna cable length for a GPS port.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> cable-length 5
ADVA-NE-1:gps-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Delay Type : nanoseconds
Delay Value: 5
GNSS System : gps-only
Installation Type : full-sky-view
PPS Generated : enabled
Satellites Number : 3
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2015-01-28,15:18:28

Related Commands
admin-state installation-type
alias pps-generation
gnss-system-types show gps-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 209

Oscilloquartz: An ADVA Company Commands Reference

cancel activation
Cancels scheduled software upgrade.

Security Level
Provisioning

Command Level
Admin Upgrade

Syntax
cancel activation

Guidelines
Use this command to cancel the activation timer. This prevents activation of the newly
transferred software.

Use the show file-services-status and show release-versions commands to observe the
software status.

If swdl-activation-ip (Software Download Activation In Progress) condition notification code

is set to anything other than not reported (nr), the condition may be retrieved by using the
show conditions command.

Use the show audit-log to observe the time the activation timer is set to expire.

Examples
Example where swdl-activation-ip condition notification code is set to na:

ADMIN--> admin upgrade

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |swdl-activation-ip |nsa |near |rcv |na |2014-03-
12,12:45:47
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,11:45:52

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 210

Oscilloquartz: An ADVA Company Commands Reference

ADVA:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 0
Database or Upgrade Current State : SWUPGRADE

ADVA:upgrade--> show audit-log

2014-03-17 11:37:41::STCHG:CPMR-2-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:ACCESS PORT-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:FLOW-1-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:41::STCHG:NETWORK PORT-1-1-1-1:OPER:Normal,SEC:ACT
2014-03-17 11:37:48::STCHG:ACCESS PORT-1-1-1-1:OPER:Outage,SEC:ACT,FAF
2014-03-17 11:37:50::STCHG:NETWORK PORT-1-1-1-1:OPER:Outage,SEC:ACT,FAF
2014-03-17 11:38:03::0:DBCH:SYSTEM:SNMPENGINEBOOTS=2
2014-03-17 11:49:32:root:EVT:Validate upgrade requested
2014-03-17 11:51:46:root:EVT:Software copy from server requested
2014-03-17 11:53:56:root:EVT:Software install requested
2014-03-17 00:00:00:root:EVT:2014-03-17 12:10:Software Activate timer set
2014-03-17 00:00:00:root:EVT:2014-03-17 13:10:Software Validate timer set
ADMIN:upgrade--> cancel activation
ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,11:45:52

ADMIN:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 100
Database or Upgrade Current State : SWINSTALL

ADVA:upgrade--> show release-versions

Active Release Version : 7.1.1-021

Standby Release Version : 7.1.1-020

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 211

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 212

Oscilloquartz: An ADVA Company Commands Reference

cancel validation-timer
Software upgrade complete. Accept software load and cancel validation timer.

Security Level
Provisioning

Command Level
Admin Upgrade

Syntax
cancel validation-timer

Guidelines

This command is used to cancel the validation timer. This signals acceptance of the newly
installed software. Once this timer has been canceled, it is possible that the old database file
will be overwritten which will prevent the ability for the system from reverting to the old
Software Package.

Use the show file-services-status and show release-versions commands to observe the
software status.

If swdl-validation-ip (Software Download Validation In Progress) condition notification code

is set to anything other than not reported (nr), the condition may be retrieved by using the
show conditions command. Use the show release-versions command to observe the active
and standby software versions.

Use the show audit-log to observe the time the validation timer is set to expire.

Examples
Refer to the following example where swdl-validation-ip condition notification code is set
to na:

ADMIN--> admin upgrade

ADVA:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 0
Database or Upgrade Current State : SWUPGRADE

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |swdl-validation-ip |nsa |near |rcv |na |2014-03-
12,12:52:03

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 213

Oscilloquartz: An ADVA Company Commands Reference

|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-

12,12:52:16
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,12:52:12

ADVA:upgrade--> show audit-log

2014-03-17 11:38:03::0:DBCH:SYSTEM:SNMPENGINEBOOTS=2
2014-03-17 11:49:32:root:EVT:Validate upgrade requested
2014-03-17 11:51:46:root:EVT:Software copy from server requested
2014-03-17 11:53:56:root:EVT:Software install requested
2014-03-17 00:00:00:root:EVT:2014-03-17 12:10:Software Activate timer set
2014-03-17 00:00:00:root:EVT:2014-03-17 13:10:Software Validate timer set
2014-03-17 12:12:48::EVT:SYSTEM:Restart command issued. Restart type:Warm
1970-01-01 00:00:00::EVT::Software Validate timer set
ADMIN:upgrade--> cancel val-timer
ADMIN:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 0
Database or Upgrade Current State : IDLE

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,12:52:16
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,12:52:14
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,12:52:14

ADVA:upgrade--> show release-versions

Active Release Version : 7.1.1-021

Standby Release Version : 7.1.1-020

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 214

Oscilloquartz: An ADVA Company Commands Reference

cir
Configure the CIR (Committed Information Rate) for a PTP flow point, NTP flow point, or
management tunnel.

Command Level
Configure PTP Flow point

Configure NTP Flow point

Configure Management Tunnel

Syntax
cir <cir>

The CIR in bps.

cir
Valid entry: PTP flow point — 0 to traffic port speed; management
tunnel — 0 to 4032000.

Examples
For a PTP flow point:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-33
ADVA:ptp-NE-1:nteosa54105420-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> show ptp-
fp
Alias :
PTP Flowpoint Type : monitoring
COS : 0
CIR : 64000
EIR : 0
Buffer Size : 44
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 100
Inner1 VLAN Ethertype : 0
Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : outage
Admin State : management
Secondary States : sgeo
ADVA:ptp-NE-1:nteosa54105420-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> cir
100000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 215

Oscilloquartz: An ADVA Company Commands Reference

ADVA:ptp-NE-1:nteosa54105420-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> show ptp-

fp
Alias :
PTP Flowpoint Type : monitoring
COS : 0
CIR : 128000
EIR : 0
Buffer Size : 44
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 100
Inner1 VLAN Ethertype : 0
Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : outage
Admin State : management
Secondary States : sgeo

For a management tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> cir 256000
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

Related Commands
buffer-size, cir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 216

Oscilloquartz: An ADVA Company Commands Reference

clear
This command is used to Clear any Sync or Time Clock manual switch operation.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
clear

Guidelines
This command clears any manual switch operation and only be used in the sync directory.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> clear
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : chassis
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : cleared
User Request Target : syncref-1-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> clear
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : chassis
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 217

Oscilloquartz: An ADVA Company Commands Reference

Clock PLL Bw : eec

Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

Example for Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> forced-switch timeref-1-1-1-1-2
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : forced-switch
User Request Target : timeref-1-1-1-1-2
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

ADVA-NE-1:time_clock-1-1-1-1--> clear
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 218

Oscilloquartz: An ADVA Company Commands Reference

Clock Mode : locked

User Request Action : clear
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
show time-clock
add timeref expected-ql
sync-ref-candidate
admin-state forced-switch
time-clock-alias
clear-lockout lockout
time-holdover-
clear-wtr priority (sync/timeclock)
performance
delete timeref selection-mode
time-ref-alias
e-Prtc-Mode show alarm-attributes
wtr-time

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 219

Oscilloquartz: An ADVA Company Commands Reference

clear all-history-data
Reset the all history Performance Monitoring count values to zero for an entity for the
supplied interval.

Security Level
Provisioning

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure Static Remote Slave

Syntax
clear all-history-data <interval>

The PM Interval for which to clear the current counts.

interval
Valid entry: 15min, 1day or 5min, 1day (depending
on the PM-Interval setting at NTE)

Guidelines
This command resets the current Performance Monitoring count values to zero for an entity
for the supplied interval. For valid entry, see Parameter Rules / Valid entries .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> pm
ADVA-NE-1:access-1-1-1-1:pm--> clear all-history-data 15min
ADVA-NE-1:access-1-1-1-1:pm--> show history-data 15min 1

Interval Type : 15min

Timestamp : 2017-02-22,12:19:22
Bin Index : 1
Valid Flag : enabled
esbf : 0
esbp : 0
esbs : 0
esc : 0
escae : 0
esde : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 220

Oscilloquartz: An ADVA Company Commands Reference

esf : 0
esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 0
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 0
l2cpfd : 0
l2cpfp : 0
les : 0
lbc : 0
opr : 0
opt : 0
abrrx : 0
abrtx : 0
aufd : 0
apfd : 0

Related Commands
clear all-history-data
show curr-data
clear curr-data
show history-data
clear history-data
show threshold-data
set-threshold

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 221

Oscilloquartz: An ADVA Company Commands Reference

clear curr-data
Reset the current Performance Monitoring count values to zero for the entity for the
supplied interval. Security Level

Security Level
Provisioning

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure Static Remote Slave

Syntax
clear curr-data <interval>

The PM Interval for which to retrieve the current

interval counts.
Valid entry: 5min, 15min,

Guidelines
This command resets the current Performance Monitoring count values to zero for the
entity for the supplied interval. For valid entry, see Parameter Rules / Valid entries .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port
access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> pm
ADVA-NE-1:access-1-1-1-1:pm--> clear curr-data 15min
ADVA-NE-1:access-1-1-1-1:pm--> show curr-data 15min

Interval Type : 15min

Timestamp : 2017-02-22,12:19:22
Valid Flag : enabled
esbf : 0
esbp : 0
esbs : 0
esc : 0
escae : 0
esde : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 222

Oscilloquartz: An ADVA Company Commands Reference

esf : 0
esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 0
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 0
l2cpfd : 0
l2cpfp : 0
les : 0
lbc : 0
opr : 0
opt : 0
abrrx : 0
abrtx : 0
aufd : 0
apfd : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 223

Oscilloquartz: An ADVA Company Commands Reference

clear history-data
Reset the history Performance Monitoring count values to zero for an entity for the supplied
interval / bin-index.

Security Level
Provisioning

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure Static Remote Slave

Syntax
clear history-data <interval> <bin-index>

The PM Interval for which to retrieve the current

counts.
interval
Valid entry: 15min, 1day or 5min, 1day (depending
on the PM-Interval setting at NTE)
The History Bin to retrieve.
bin-index
Valid entry: 15min:1-32 (1 being the most recent and
32 being the oldest), 1day:1 only

Guidelines
This command resets the history Performance Monitoring count values to zero for an entity
for the supplied interval / bin-index. For valid entry, see Parameter Rules / Valid entries .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> pm
ADVA-NE-1:access-1-1-1-1:pm--> clear history-data 15min 1
ADVA-NE-1:access-1-1-1-1:pm--> show history-data 15min 1
Interval Type : 15min
Timestamp : 2014-02-22,12:19:22
Bin Index : 1
Valid Flag : enabled
esbf : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 224

Oscilloquartz: An ADVA Company Commands Reference

esbp : 0
esbs : 0
esc : 0
escae : 0
esde : 0
esf : 0
esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 0
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 0
l2cpfd : 0
l2cpfp : 0
les : 0
lbc : 0
opr : 0
opt : 0
abrrx : 0
abrtx : 0
aufd : 0
apfd : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 225

Oscilloquartz: An ADVA Company Commands Reference

clear-lockout
This command is used to clear a lockout operation.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
clear-lockout [<syncref-eid> | <timeref-eid>]

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid
Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
This command clears sync reference lockout operation and can only be used in the sync
sub-menu. For valid entity identifiers, see Parameter Rules / Valid entries .

Examples
Example for Configure Sync level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias :
Priority : 1
Source : clk-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : lockedout
Effective QL : ql-failed

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 226

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:sync-1-1-1-1--> clear-lockout syncref-1-1-1-1-1

ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias :
Priority : 1
Source : clk-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : unavailable
Effective QL : ql-failed

Example for Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : lockout
User Request Target : timeref-1-1-1-1-1
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

ADVA-NE-1:time_clock-1-1-1-1--> clear-lockout timeref-1-1-1-1-1

ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 227

Oscilloquartz: An ADVA Company Commands Reference

Selected Reference : gps-1-1-1-1

Clock Mode : locked
User Request Action : clear-lockout
User Request Target : timeref-1-1-1-1-1
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 228

Oscilloquartz: An ADVA Company Commands Reference

clear-wtr
This command is used to clear the wait time for Wait-To-Restore switch operation.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
clear-wtr [<syncref-eid> | <timeref-eid>]

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid
Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
This command clears the sync WTR timer and is only used in the sync sub-menu. For valid
entity identifiers, see Equipment / Entity IDs .

Examples
Example for Configure Sync level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> clear-wtr syncref-1-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias : Bits
Priority : 1
Source : bits_in-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : unavailable

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 229

Oscilloquartz: An ADVA Company Commands Reference

Effective QL : ql-failed

Example for Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> clear-wtr timeref-1-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : none
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 230

Oscilloquartz: An ADVA Company Commands Reference

clock-active-ports
Enables or disables ports in the clock group of the LPN line card.

Command Level
Configure clk-x4-port-group

Syntax
clk-active-ports <control, control, control, control>

Enable or disable the port.

control
Valid values: enabled or disabled.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure clk-x4-lpn clk_x4_lpn-1-1-2
ADVA-NE-1:clk_x4_lpn-1-1-2--> configure clk-x4-port-group clkx4_group-1-1-2-1
ADVA-NE-1:clkx4_group-1-1-2-1--> admin-state [in-service|management]
ADVA-NE-1:clkx4_group-1-1-2-1--> alias <MyAlias>
ADVA-NE-1:clkx4_group-1-1-2-1--> clk-active-ports enabled,disabled,enabled,enabled

Related Commands
squelch-ctrl, squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 231

Oscilloquartz: An ADVA Company Commands Reference

clock-pll-bw
Select the clock PLL bandwidth.

Security Level
Provisioning

Command Level
Configure Sync

Syntax
clock-pll-bw <clock-pll-bw>

Select the clock PLL bandwidth. Choices are: EEC

clock-pll-bw
or SSU

Guidelines
This command is used to select the clock PLL bandwidth.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1--> clock-pll-bw eec
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : chassis
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Clock PLL Bw : eec
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-ssu-b
User Request Action : none
User Request Target : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 232

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref list syncref show sync
admin-state lockout show sync-available-
clear manual-switch refs
clear-lockout clock-pll-bw show syncref
clear-wtr priority (sync/timeclock) sync-alias
delete syncref selection-mode sync-ref-alias
forced-switch show alarm-attributes wtr-time

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 233

Oscilloquartz: An ADVA Company Commands Reference

clock-recovery-mode
Set the clock recovery mode. Clock recovery mode is not editable when an SOOC is
configured in association with a Telecom Slave.

Security Level
Provisioning

Command Level
Configure Telecom Slave

Syntax
clock-recovery-mode <recovery-mode>

The mechanism used to recovery the time.

recovery-mode
Valid entry: one-way, two-way.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> clock-recovery-mode one-way
ADVA:ptp-NE-1:ts-1-1--> show ts
Alias : doctest1
Clock Identity : 0080ea2fc0700000
Operational State : outage
Admin State : management
Secondary States : sgeo
Sync Reference Mode : disabled
QL Mode : disabled
Sync : sync-1-1-1-1
PTP Domain Number : 0
Clock Recovery Mode : one-way
Clock Recovery State : freerun
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : Not Available

Related Commands
admin-state ql-mode
assumed-ql show telecom-slave
clock-recovery-mode sync-id
expected-ql sync-ref-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 234

Oscilloquartz: An ADVA Company Commands Reference

clock set
Adjust the time of day for the System or the time and date for the System.

Security Level
Provisioning

Command Level
Configure System

Syntax
clock set time <time>
clock set date-time <date> <time>

Configure the Local Time of the System.

Valid entry: hours, minutes and seconds, in the
time format hh:mm:ss, where hh is a two digit hour value
from 1 to 24 and mm/ss is a two digit minute value
from 1 to 60
Configure the Date for the System.
Valid entry: year, month and date, in the format
date yyyy-mm-dd, where yyyy is a four digit year value,
mm is a two digit month value from 1 to 12, dd is a
two digit day value from 1 to 31

Guidelines
This command is used edit the Time of Day for the system. This command is also used edit
the Time of Day and Date for the system. The format of this entry is: hh:mm yyyy-mm-dd.

The system will validate that the entered value is a proper date (i.e., user cannot enter a date
with a month of 02 and a day value of 31).

Examples
ADVA--> configure system
ADVA:system--> clock set date-time 2018-01-08 10:46
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 235

Oscilloquartz: An ADVA Company Commands Reference

Management Traffic Bridging : disabled

Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 236

Oscilloquartz: An ADVA Company Commands Reference

cno-mask
Configure the Carrier-to-Noise power ratio in db-Hz for the GPS port.

Command Level
Configure GPS Port

Syntax
cno-mask <cno-mask>

C/No ratio filter.

cno-mask
Valid values: 0 to 55. The default is 35.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> cno-mask 35
ADVA-NE-1:gnss-1-1-1-1--> show gps-port
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3

cold-reset
Resets the GNSS receiver. After the reset, the receiver reacquires the GNSS signal.

Command Level
configure gps-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 237

Oscilloquartz: An ADVA Company Commands Reference

Syntax
cold-reset

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteOSA 5422-1-1-1
ADVA-NE-1:nte nteOSA 5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> cold-reset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 238

Oscilloquartz: An ADVA Company Commands Reference

config-ssl-strength
Configure the SSL cipher strength.

Security Level
superuser

Command Level
Configure User-Security

Syntax
config-ssl-strength [high, low, medium]

Guidelines

This command is used to set the security strength of the system. The options for these
settings are high, low, or medium. The default is low.

Encryption strength is measured in key length — number of bits in the key. To decipher an
SSL communication, one needs to generate the correct decoding key. Mathematically
speaking, 2n possible values exist for an n-bit key. Thus, 40-bit encryption (low) involves 240
possible values, 56-bit encryption (medium) involves 256 possible combinations, and 128-
bit encryption (high) 2128 combinations.

Changing the SSL strength setting results in disconnecting all active users, requiring them
to re-login.

Examples
ADVA:--> configure user-security
ADVA:user-sec--> config-ssl-strength high
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 239

Oscilloquartz: An ADVA Company Commands Reference

RADIUS Accounting : disabled

SSL Cipher Strength : high
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol
regenerate-ssl-certificate
auth-type
security-strength
config-ssl-strength
security-trap-type
config-user <user-id> cli-paging
show active-ssl-certificate
config-user <user-id> comment
show all-users
config-user <user-id> login-
show local-user
timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show security-system
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 240

Oscilloquartz: An ADVA Company Commands Reference

config-user <user-id> cli-paging

Enables or disables paging mode for this user.

Security Level
retrieve
superuser

Command Level
Configure User Security

Syntax
config-user <user-id> cli-paging <control>

User identifier.
user-id
Valid entry: existing user-id (see add usm-user)
Enable or Disable paging mode for this user. When
paging is enabled, information is output to the console
control
24 lines at a time.
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command enables or disables paging mode for this particular user. When paging is
enabled, information is output to the console 24 lines at a time. The user attempting to
change this attribute must be the account owner or a superuser.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-user SamanthaTeig cli-paging enabled
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *******
Comment :
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 241

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 242

Oscilloquartz: An ADVA Company Commands Reference

config-user <user-id> comment

Change the comment associated with a user Profile.

Security Level
retrieve

superuser

Command Level
Configure User Security

Syntax
config-user <user-id> comment <user-comment>

A comment string to associate with this user.

user-comment
Valid entry: Character string - 0 to 64 characters; No
spaces are allowed. Default is null.

Guidelines
This command is used to change the comment associated with a user. The comment field is
a user configurable string of up to 64 characters (no spaces). The user attempting to change
this attribute must be the account owner or a superuser.

Example
ADVA--> configure user-security
ADVA:user-sec--> config-user SamanthaTeig comment SalesSupportEngineer
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *******
Comment : SalesSupportEnginner
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 243

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength show active-ssl-certificate
config-user <user-id> cli-paging show all-users
config-user <user-id> comment show local-user
config-user <user-id> login- show provisioned-ssl-certificate
timeout show remote-user
config-user <user-id> password show security-system
config-user <user-id> priv-level tacacs-privilege-control
delete <user-id> tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 244

Oscilloquartz: An ADVA Company Commands Reference

config-user <user-id> login-timeout

Change the inactivity timeout for this user.

Security Level
retrieve (for self)

superuser (for other users)

Command Level
Configure User Security

Syntax
config-user <user-id> login-timeout <timeout>

The Number of Seconds to wait until the inactivity

timeout is implemented for this user.
timeout
Valid entry: 0 to 60 (minutes). If set to 0, no timeout.
Default is 15.

Guidelines
This command supports changing the inactivity timeout for a user. The range for this
timeout value is between 1 and 60 minutes. Setting the value to 0 disables the timeout
option. The default value for this attribute is 15 minutes. The user attempting to change this
attribute must be the account owner or a superuser.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-user SamanthaTeig login-timeout 15
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *******
Comment :
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 245

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 246

Oscilloquartz: An ADVA Company Commands Reference

config-user <user-id> password

Change the password of this user. The configuration rules for passwords depend on the
security strength settings in security-strength.

Security Level
superuser

Command Level
Configure User Security

Syntax
config-user <user-id> password <password> <repeat-password>

The password associated with this user Profile.

password
Valid values: 0 - 9, a - z, A - Z, # * % - _ . @ !
repeat-password Re-enter the password to match the first one.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-user SamanthaTeig password ******** ********
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : ********
Comment : SalesSupportEnginner
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 247

Oscilloquartz: An ADVA Company Commands Reference

config-user <user-id> priv-level

Change the privilege level of this user. The possible values are:

l retrieve - user will be limited to commands to retrieve status and configuration

info.
l maintenance - retrieve level privileges plus maintenance operations (such as ping,
loopbacks).
l provisioning - maintenance level privileges plus configuration commands.
l superuser - all user commands In order to perform this command, the logged in
user must be a superuser.

Security Level
superuser

Command Level
Configure User Security

Syntax
config-user <user-id> priv-level <level>

The level dictates which commands that this user is allowed to

level perform.
Valid entry: maintenance, provisioning, retrieve, superuser

Example
ADVA--> configure user-security
ADVA:user-sec--> config-user SamanthaTeig priv-level maintenance
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *********
Comment : SalesSupportEnginner
Privilege Level : maintenance
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 248

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 249

Oscilloquartz: An ADVA Company Commands Reference

configure (acl)
Configure a new Management Access Control List (ACL) entry.

Security Level
Provisioning

Command Level
Access Control List

Syntax
For Access Control List:
configure permit <ipversion> [<ipv4-address> <network-mask>]|[<ipv6-address> <ipv6-
prefix-length>]

The IP protocol version for the Management ACL

<ipversion> entry.
Valid entry: ipv4, ipv6. The default is ipv4.
IPv4 address of the associated Management Access
ipv4-address Control List entry.
Valid entry: Valid IPv4 Address. The default is 0.0.0.0.
IPv6 address of the associated Management Access
Control List entry.
ipv6-address
Valid entry: A valid IPv6 address. The default is
0000:0000:0000:0000:0000:0000:0000:000.
Network Mask of the associated Management
Access Control List entry. This parameter is
network-mask requested if the IP version is IPv4.
Valid entry: Valid IPv4 Mask. Default is
255.255.255.255.
The length of the Prefix. This parameter is requested
ipv6-prefix- if the IP version is IPv6.
length
Valid entry: 0-64. The default is 0.

Guidelines
This command is used to configure a Management Access Control List entry, which allows
you to limit access to the NE (through DCN or management tunnels) to specific IP addresses
or IP address ranges (subnetworks). For example, this can be used to restrict the

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 250

Oscilloquartz: An ADVA Company Commands Reference

management, PTP, and NTP connections that are accepted. Up to 100 entries can be made,
and each entry can be individually enabled or disabled. Enabled entries apply to all
management interfaces. To enable an ACL entry, use the control command.

An ACL entry is in effect only if enabled. When there is one or more ACL entries enabled,
only the management traffic from specified sources are allowed, which means traffic from
all other sources is blocked. When all ACL entries are disabled, the management traffic is
allowed to be from any of the sources.

Examples
To configure a new IPv4 ACL entry:

ADVA--> configure system

ADVA:system--> acl-entry acl-1
ADVA:system:acl-1--> configure permit ipv4 10.10.10.10 255.255.255.0
ADVA:system:acl-1--> show acl-entry

Control : disabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.10
Network Mask : 255.255.255.0
IPv6 Address :
0000:0000:0000:0000:0000:0000:0000:0000
IPv6 Prefix Length : 64

To configure a new IPv6 ACL entry:

ADVA--> configure system

ADVA:system--> acl-entry acl-2
ADVA:system:acl-2--> configure permit ipv6 2000.1000.0000.0000 0000.0000.0000.000A 64
ADVA:system:acl-2--> show acl-entry

Control : disabled
Filter Action : permit
IP Version : ipv6
Network Address : 0.0.0.0
Network Mask : 255.255.255.255
IPv6 Address : 2000.1000.0000.0000
0000.0000.0000.000A
IPv6 Prefix Length : 64

Related Commands
activate
cancel activation
show audit-log
cancel validation-timer
show conditions
configure (ipv4-traffic-acl)
show file-services-status
configure (ipv6-traffic-acl)
show release-versions
install
transfer-file
revert to-standby
show acl-entry

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 251

Oscilloquartz: An ADVA Company Commands Reference

configure (ipv4-traffic-acl)
Configure a new IPv4 Traffic Access Control List (ACL) entry.

Security Level
Provisioning

Command Level
IPv4 Traffic ACL

Syntax
For IPv4 Traffic Access Control List:
configure permit ipv4 <ipv4-address> <network-mask>

IPv4 address of the associated IPv4 Traffic ACL entry.

ipv4-address
Valid entry: Valid IPv4 address. The default is 0.0.0.0.
Network Mask of the associated Management
Access Control List entry. This parameter is
network-mask requested if the IP version is IPv4.
Valid entry: Valid IPv4 Mask. Default is
255.255.255.255.

Guidelines
This command is used to configure the Access Control List (ACL) for IPv4 traffic, which
allows you to filter for in-band management, PTP, and NTP packets from a specific IP source
address. The source address for IPv4 can be of any type and is not limited to unicast
addresses. Up to 100 entries can be made for each IP type, and each entry can be
individually enabled or disabled. Enabled entries apply to all PTP/NTP interfaces. To enable
an ACL entry, use the control (ipv4-traffic-acl/ipv6-traffic-acl) command.

l If the Management ACL is also configured, ensure to set

the MCI/NCI IP and Subnet Mask in the Management ACL
command. See configure (acl).
l When configuring IPv4 traffic ACL entries, ensure that you
do not define subnet entries which overlap (partially or
fully) with each other.

Examples
To configure a new IPv4 Traffic ACL entry:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 252

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> configure system

ADVA:system--> ipv4-traffic-acl-entry ipv4_traffic_acl-1
ADVA:system:ipv4_traffic_acl-1--> configure permit ipv4 10.10.10.1 255.255.255.0
ADVA:system:ipv4_traffic_acl-1--> show ipv4-traffic-acl-entry

Control : disabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.1
Network Mask : 255.255.255.0

Related Commands
show acl-entry
configure (acl)
show acl-list
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-entry
control
show ipv4-traffic-acl-list
control (ipv4-traffic-acl/ipv6-traffic-
show ipv6-traffic-acl-entry
acl)
show ipv6-traffic-acl-list

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 253

Oscilloquartz: An ADVA Company Commands Reference

configure (ipv6-traffic-acl)
Configure a new IPv6 Traffic Access Control List (ACL) entry.

Security Level
Provisioning

Command Level
IPv6 Traffic ACL

Syntax
For IPv6 Traffic Access Control List:
configure permit ipv6 <ipv6-address> <prefix>

IPv6 address of the associated IPv6 Traffic ACL entry.

ipv6-address Valid entry: A valid IPv6 address. The default is
0000:0000:0000:0000:0000:0000:0000:000.
The length of the IPv6 prefix.
prefix
Valid entry: 0-64. The default is 64.

Guidelines
This command is used to configure the Access Control List (ACL) for IPv6 traffic, which
allows you to filter for in-band management and PTP packets from a specific IP source
address. The source address for IPv6 can be of any type and is not limited to unicast
addresses. Up to 100 entries can be made for each IP type, and each entry can be
individually enabled or disabled. Enabled entries apply to all PTP interfaces. To enable an
ACL entry, use the control (ipv4-traffic-acl/ipv6-traffic-acl) command.

l NTP traffic is not supported for IPv6.

l If the Management ACL is also configured, ensure to set
the MCI/NCI IP and Subnet Mask in the Management ACL
command. See configure (acl).
l When configuring IPv6 traffic ACL entries, ensure that you
do not define subnet entries which overlap (partially or
fully) with each other.

Examples
To configure a new IPv6 Traffic ACL entry:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 254

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> configure system

ADVA:system--> ipv6-traffic-acl-entry ipv6_traffic_acl-1
ADVA:system:ipv6_traffic_acl-1--> configure permit ipv6
1000.1010.0000.0000.0000.0000.0000.000A 60
ADVA:system:ipv6_traffic_acl-1--> show ipv6-traffic-acl-entry

Control : disabled
Filter Action : permit
IP Version : ipv6
IPv6 Address : 1000:1010:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 60

Related Commands
configure (acl)
show acl-list
configure (ipv4-traffic-acl)
show ipv4-traffic-acl-entry
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-list
configure (ipv6-traffic-acl)
show ipv6-traffic-acl-entry
control (ipv4-traffic-acl/ipv6-traffic-
show ipv6-traffic-acl-list
acl)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 255

Oscilloquartz: An ADVA Company Commands Reference

configure (log-server)
Configure a Syslog server.

Security Level
Provisioning

Command Level
Syslog Server

Syntax
configure <ip-address> <port>

The IP Address of the Syslog Server.

ip-address
Valid entry: Valid IP Address. Setting this address to
0.0.0.0 disables this server from being used.
The IP port of the Syslog Server.
port
Valid entry: Valid IP port number

Guidelines
This command is used to configure the IP address of a Syslog Server.

Up to three Syslog servers can be configured.

Examples
To configure a Syslog server:

ADVA--> configure system

ADVA:system--> syslog-server 1
ADVA:system:syslog-1--> configure 10.10.10.10 1
ADVA:system:syslog-1--> show syslog-server

IP Address : 10.10.10.10
port : 1

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 256

Oscilloquartz: An ADVA Company Commands Reference

configure feature
Enable or disable a license option.

Command Level
Admin Software License

Syntax
configure feature <feature> <control>

The license you want to enable or disable.

Valid values:
Advanced-Interference-Detection,
Extended-Optical-ports, High-Accuracy-BC,
NTP-Server, PTP-Broadcast-Profile,
feature PTP-Clock-G-8275-1-and-IEEE-1588-2008-Annex-F-Profiles, PTP-Clock-Power-
and-Utility-Profiles,
PTP-Enterprise-and-IEEE-1588-2008-L3-Multicast-Profiles, PTP-MC-BC-IP-
UNICAST-Profile-<number of remote slaves>-Remote-Slaves,
SyncJack-Extended-Scaled,
e-PRTC
Enable or Disable the feature.
control
Valid entry: enabled, disabled;Default is disabled.

Examples
Example of disabling the SyncJack-Extended-Scaled license:

ADVA--> admin sw-license

ADVA:sw-lic--> configure feature SyncJack-Extended-Scaled disabled
ADVA:sw-lic--> show feature SyncJack-Extended-Scaled
Enabled/Disabled : disabled

Related Commands

show feature show all-features

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 257

Oscilloquartz: An ADVA Company Commands Reference

configure ip-version
Specify the IP protocol version used to access a Syslog server.

Security Level
provisioning

Command Level
SysLog Server

Syntax
configure ip-version <ip-version>

The IP protocol version used to access a Syslog

ip-version server
Valid entry: ipv4, ipv6. The default is ipv4.

Guidelines
This command is used to specify the IP protocol version used to access a Syslog server.

Examples
Example of specifying an IPv6 protocol version to access a Syslog server:

ADVA--> configure system

ADVA:system--> syslog-server 1
ADVA:system:syslog-1--> configure ip-version ipv6
ADVA:system:syslog-1--> show syslog-server
IP Version : ipv6
IPv4 Address : 10.10.10.10
IPv6 Address : 0020:0000:0000:0000:0000:0000:0000:0020
port : 5555

Related Commands
admin-state
show audit-log
alias
show conditions
configure ipv4-address
show ne-conditions
configure ipv6-address
show syslog-server
list sys-resource
show system
show alarms

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 258

Oscilloquartz: An ADVA Company Commands Reference

configure ipv4-address
Configure the IPv4 address and Port number to access a Syslog server.

Security Level
provisioning

Command Level
SysLog Server

Syntax
configure ipv4-address <ipv4-address> <port>

The IPv4 address of the Syslog Server.

ipv4-address
Valid entry: Valid IPv4 Address. Setting this address
to 0.0.0.0 disables this server.
The IP port of the Syslog Server.
port
Valid entry: Valid port number of the Sys Log Server.

Guidelines
This command is used to configure the IPv4 address and Port number to access a Syslog
Server.

Both IPv4 and IPv6 IP address can be configured, but only one IP address can be operational
at a time. To configure the IP version address that takes effect, use the configure ip-version
command.

Up to three Syslog servers can be configured.

Examples
Example of configuring the IPv4 address and Port number:

ADVA--> configure system

ADVA:system--> syslog-server 1
ADVA:system:syslog-1--> configure ipv4-address 10.10.10.10 5555
ADVA:system:syslog-1--> show syslog-server
IP Version : ipv6
IPv4 Address : 10.10.10.10
IPv6 Address : 0020:0000:0000:0000:0000:0000:0000:0020
port : 5555

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 259

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
configure ipv6-address show ne-conditions
list sys-resource show syslog-server
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 260

Oscilloquartz: An ADVA Company Commands Reference

configure ipv6-address
Configure the IPv6 address and Port number to access a Syslog server.

Security Level
provisioning

Command Level
SysLog Server

Syntax
configure ipv6-address <ipv6-address> <port>

The IPv6 address of the Syslog Server.

ipv6-address
Valid entry: A valid IPv6 address. The default is
0000:0000:0000:0000:0000:0000:0000:000.
The IP port of the Syslog Server.
port
Valid entry: Valid port number of the Sys Log Server.

Guidelines
This command is used to configure the IPv6 address and Port number to access a Syslog
Server.

Both IPv4 and IPv6 IP address can be configured, but only one IP address can be operational
at a time. To configure the IP version address that takes effect, use the configure ip-version
command.

Up to three Syslog servers can be configured.

Examples
Example of configuring the IPv6 address and Port number:

ADVA--> configure system

ADVA:system--> syslog-server 1
ADVA:system:syslog-1--> configure ipv6-address 0020:0000:0000:0000:0000:0000:0000:0020
514
ADVA:system:syslog-1--> show syslog-server
IP Version : ipv6
IPv4 Address : 10.10.10.10
IPv6 Address : 0020:0000:0000:0000:0000:0000:0000:0020
port : 514

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 261

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
configure ipv4-address show ne-conditions
list sys-resource show syslog-server
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 262

Oscilloquartz: An ADVA Company Commands Reference

configure src-addr
Configure the NE Source Address.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
configure src-addr out-ip-intf-addr <src-addr-intf>
or
configure src-addr sys-ip-addr <snmpv1-intf> <src-addr-intf>

Any configured management IP interface name and

eth0.
snmpv1-intf
Valid entry: Any configured management IP interface
name or eth0.
Any configured management IP interface name and
eth0.
src-addr-intf
Valid entry: Any configured management IP interface
name or eth0.

Guidelines
This command is used to configure the NE source address. If the system IP interface option
is selected, the user designates one management IP entity for the SNMPv1 communications
and one for the NE source address. If the outgoing IP interface option is selected, then an IP
interface for SNMPv1 communications is the only option.

Examples
For Outgoing IP Interface Address option:

ADVA:--> configure communication

ADVA:comms--> configure src-addr out-ip-intf-addr ?
eth0 Select the name of the SNMP v1 interface
phoenix1 Select the name of the SNMP v1 interface
ADVA:comms--> configure src-addr out-ip-intf-addr eth0
ADVA:comms--> show src-addr
Address Type : out-ip-intf-addr
SNMP v1 IP Interface Name : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 263

Oscilloquartz: An ADVA Company Commands Reference

For System IP Address option:

ADVA:--> configure communication

ADVA:comms--> configure src-addr sys-ip-addr ?
eth0 Select the name of the SNMP v1 interface
phoenix1 Select the name of the SNMP v1 interface
ADVA:comms--> configure src-addr sys-ip-addr eth0 ?
eth0 Select the name of the source address interface
phoenix1 Select the name of the source address interface
ADVA:comms--> configure src-addr sys-ip-addr eth0 eth0
ADVA:comms--> show src-addr
Address Type : sys-ip-addr
Source Address Interface Name : eth0
SNMP v1 IP Interface Name : eth0

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

configure user-mtie-mask
Access to custom MTIE mask configuration commands. Once you access the sublevel
commands group, you can use the show user-mtie-mask command to display current
configuration, or configure the mask name, mask coordinates, and mask interval thresholds.

Command Level
Configure Syncjack

Syntax
configure user-mtie-mask <user_mtie_mask-EID>

The entity identifier of the custom MTIE mask.

user_mtie_mask-EID
Valid values: user_mtie_mask-1-1.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure user-mtie-mask

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 264

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:syncjack:user-mtie-mask--> config user-mtie-mask user_mtie_mask-1-1

ADVA-NE-1:syncjack:user_mtie_mask-1-1-->

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 265

Oscilloquartz: An ADVA Company Commands Reference

configure usm-user-auth-key
Configure a USM user authentication key.

Security Level
Superuser

Command Level
Configure SNMP

Syntax
configure usm-user-auth-key <user-name> <engine-id> <auth-key> <repeat-auth-key>

A human readable string representing the name of

user-name the user.
Valid entry: Character string - 0 to 64 characters
An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent own
snmpEngineID value.
engine-id
Valid entry: Character string - 5 to 32 characters.
Enter ‘local’ for Local Engine ID or full remote Engine
ID.
Authentication key. Must be entered twice.
auth-key
Valid entry: Character string - 0 to 64 characters

Guidelines
This option is only available if Auth/Priv or Auth/No Priv Security Level is selected. The user
access type must be set to read/write to change an existing USM User authentication key.

Examples
ADVA--> configure snmp
ADVA:snmp--> configure usm-user-auth-key McCracken 0x800009f0030100ea02a520 **********
**********
ADVA:snmp--> show all-usm-users

User Name : ADMIN

User Security Name : ADMIN
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 266

Oscilloquartz: An ADVA Company Commands Reference

User Privacy Key : *****

===========================================================
User Name : MONITOR
User Security Name : MONITOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****

===========================================================
User Name : OPERATOR
User Security Name : OPERATOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
===========================================================
User Name : PROVISION
User Security Name : PROVISION
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
===========================================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 267

Oscilloquartz: An ADVA Company Commands Reference

configure usm-user-priv-key
Configure a USM user privacy key.

Security Level
Superuser

Command Level
Configure SNMP

Syntax
usm-user-priv-key <user-name> <engine-id> <priv-key> <repeat-priv-key>

A human readable string representing the name of

user-name the user.
Valid entry: Character string - 0 to 64 characters
An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent own
snmpEngineID value.
engine-id
Valid entry: Character string - 5 to 32 characters.
Enter ‘local’ for Local Engine ID or full remote Engine
ID.
A non-readable string representing 8 to 32
characters. Must be entered twice.
priv-key
Valid entry: Character string - 0 to 128 characters;
This option is only applicable if sec-level is set to
auth-priv.

Guidelines
This option is only available if Auth/Priv Security Level is selected. The user access type must
be set to read/write to make this change.

Examples
ADVA--> configure snmp
ADVA:snmp--> configure usm-user-priv-key McCracken 0x800009f0030100ea02a520 **********
**********
ADVA:snmp--> show all-usm-users

User Name : ADMIN

User Security Name : ADMIN
User Security Level : no-auth
User Auth Protocol : no-auth-protocol

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 268

Oscilloquartz: An ADVA Company Commands Reference

User Privacy Protocol : no-priv-protocol

User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
==========================================================

User Name : MONITOR

User Security Name : MONITOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
===========================================================
User Name : OPERATOR
User Security Name : OPERATOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
===========================================================
User Name : PROVISION
User Security Name : PROVISION
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
===========================================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 269

Oscilloquartz: An ADVA Company Commands Reference

const-te-clear-threshold
This command configures the Constant Time Error Alarm Clear threshold for this Clock Probe
or PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
const-te-clear-threshold <const-te-clear-threshold>

const-te-clear- Constant Time Error Alarm Clear threshold.

threshold
Valid entry: 0-100000000; default is 0

Guidelines
Constant Time Error Clear Threshold (in ns). This option is only applicable if Measurement
Type is set to Phase. If the constant measurement (average measurement) meets this
threshold (+ or - direction in respect to 0 on the phase TE graph) will clear an existing SJ
Constant TE Threshold Exceeded alarm.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> const-te-clear-threshold 0
ADVA-NE-1:syncjack:clock_probe-1-2--> show clock-probe

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,
(measurements/s) : 1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 270

Oscilloquartz: An ADVA Company Commands Reference

MTIE MaskType : g823-pdh

MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 271

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-window
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 272

Oscilloquartz: An ADVA Company Commands Reference

const-te-threshold
This command configures the Constant Time Error Alarm Threshold for this Clock Probe or
PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
const-te-threshold <const-te-threshold>

const-te- Constant Time Error Alarm Threshold.

threshold
Valid entry: 0-100000000; default is 0

Guidelines
Constant Time Error Threshold (in ns). This option is only applicable if Measurement Type is
set to Phase. If the constant measurement (average measurement) exceeds this threshold (+
or - direction in respect to 0 on the phase TE graph) then this will create an SJ Constant TE
Threshold Exceeded alarm. Constant TE threshold must be at least 50 ns greater than the
clear threshold. Setting both Const TE Threshold and Const TE Clear Threshold to 0 will
disable this TCA.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> const-te-threshold 0
ADVA-NE-1:syncjack:clock_probe-1-2--> show clock-probe
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 273

Oscilloquartz: An ADVA Company Commands Reference

(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 274

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-windowdelete clock-
mtie-mask-type
probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 275

Oscilloquartz: An ADVA Company Commands Reference

const-te-window
This command configures the Constant Time Error Window for this Clock Probe or PTP Clock
Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
const-te-window <const-te-clear-threshold>

Constant Time Error Window.

const-te-window
Valid entry: 500-20000; default is 1000

Guidelines
Constant Time Error Window Size (in seconds). This is the size of the sliding window of
sampled measurements made for constant TE calculation.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock_probe-1-1--> const-te-window 1000
ADVA-NE-1:syncjack:clock_probe-1-1--> show clock-probe

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 276

Oscilloquartz: An ADVA Company Commands Reference

Raw Data Collection : disabled

Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 277

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-window
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 278

Oscilloquartz: An ADVA Company Commands Reference

contact
Edit the contact person info for this Network Element.

Security Level
Provisioning

Command Level
Network Element

Syntax
contact <ne-contact>

A character string (0 to 256 characters) representing

the Contact for the Network Element.
ne-contact
Valid entry: Character string - 0 to 256 characters, an
empty string or string containing spaces must be
enclosed in quotation marks. Default is null.

Guidelines
This command supports editing the contact person info for this Network Element.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> contact John_Smith
ADVA-NE-1--> show network-element ne-1
NE Type : shelf-nteosa5422
NE Name : OSA 5422
NE Location :
NE Contact : John_Smith
NE Description : OSA 5422
Accepted Status : enabled
NE CLI Prefix : NE-1
............PM Interval : 5min

Related Commands
admin-state show alarm-attributes
autoprov-mode show ne-alarms
location show ne-conditions
name (ne, probe) show network-element
opr-lamptest show shelf-info
prompt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 279

Oscilloquartz: An ADVA Company Commands Reference

control
Enable or disable this Management Access Control List (ACL) entry, Network Time Protocol
(NTP) Client, or Remote Authentication Server entry.

Security Level
provisioning (Access Control List Entry, Configure NTP Client)

superuser (Remote Authentication Server)

Command Level
Access Control List Entry

Configure NTP Client

Remote Authentication Server

Syntax
control <control>

Enable or disable this Management ACL entry, NTP

Client, or Remote Authentication Server entry.
control
Valid entry: enabled, disabled;Default is enabled. The
default is disabled.

Guidelines

For Management ACL Entry:

This command is used to enable or disable the Management ACL entry, which allows you to
limit access to the NE (through DCN or management tunnels) to specific IP addresses or IP
address ranges (subnetworks). For example, this can be used to restrict the management,
PTP, and NTP connections that are accepted.

For NTP Client:

This command is used to enable or disable the NTP Client.

For Remote Authentication Server:

Enables or disables this Remote Authentication Server entry. Up to three Remote

Authentication Servers can be configured for the system. All three server objects are created
by the system but set to the disabled state. The user can use the commands described in
the Related Commands section to configure the attributes for a particular server.

For valid entity identifiers, see Equipment / Entity IDs .

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 280

Oscilloquartz: An ADVA Company Commands Reference

Examples
To enable a Management ACL entry:

ADVA:system:acl-2--> control enabled

ADVA:system:acl-2--> show acl-entry
Control : enabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.10
Network Mask : 255.255.255.0
IPv6 Address :
0000:0000:0000:0000:0000:0000:0000:0000
IPv6 Prefix Length : 64

To enable the NTP client:

ADVA--> configure system

ADVA:system--> ntp-client
ADVA:system:ntp_client--> contol enabled
ADVA:system:ntp_client--> show ntp-client

Primary Server IP Version : ipv4

Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : primary
Round-trip delay to NTP server (micro secs) : 258
NTP server precision (micro secs) : 1000001
Polling interval (seconds) : 16

To enable Remote Authentication Server entry:

ADVA--> configure user-security

ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> control enabled

RAS Status : enabled

Order : first
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 281

Oscilloquartz: An ADVA Company Commands Reference

RADIUS accounting port : 1813

Related Commands
For Management ACL Entry:
configure (acl)
control show acl-entry
control (ipv4-traffic-acl/ipv6-traffic- show acl-list
acl)

For NTP Client:

admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

For Remote Authentication Server:

accounting-port
control
retries
ip-address (rap)
secret
ip-version (rap)
show rap-server
ipv6-address (rap)
timeout
order
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 282

Oscilloquartz: An ADVA Company Commands Reference

control (ipv4-traffic-acl/ipv6-traffic-
acl)
Enable or disable this IPv4/IPv6 Traffic Access Control List (ACL) entry.

Security Level
provisioning (IPv4/IPv6 Traffic ACL)

Command Level
IPv4 Traffic ACL

IPv6 Traffic ACL

Syntax
control <control>

Enable or disable this IPv4/IPv6 Traffic ACL entry.

control
Valid entry: enabled, disabled. The default is
disabled.

Guidelines

For Management ACL Entry:

This command is used to enable or disable the IPv4/IPv6 Traffic ACL entry, which allows you
to filter for in-band management, PTP, and NTP packets from a specific IP source address.

Examples
To enable an IPv4 Traffic ACL entry:

ADVA--> configure system

ADVA:system--> ipv4-traffic-acl-entry ipv4_traffic_acl-1
ADVA:system:ipv4_traffic_acl-1--> control enabled
ADVA:system:ipv4_traffic_acl-1--> show ipv4-traffic-acl-entry

Control : enabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.1
Network Mask : 255.255.255.0

To enable an IPv6 Traffic ACL entry:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 283

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> configure system

ADVA:system--> ipv6-traffic-acl-entry ipv6_traffic_acl-1
ADVA:system:ipv6_traffic_acl-1--> control enabled
ADVA:system:ipv6_traffic_acl-1--> show ipv6-traffic-acl-entry

Control : enabled
Filter Action : permit
IP Version : ipv6
IPv6 Address : 1000:1010:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 60

Related Commands
configure (acl)
show acl-list
configure (ipv4-traffic-acl)
show ipv4-traffic-acl-entry
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-list
control (ipv4-traffic-acl/ipv6-traffic-
show ipv6-traffic-acl-entry
acl)
show ipv6-traffic-acl-list
show acl-entry

control-field
Configures non-IRIG data transmission according to IEEE1344 or IEEE C37.118 protocols for
the optical and RS-422 ports of the IRIG-B line card.

Control field is available only when time-code is set to B004.

Command Level
configure irig-opt

configure irig-rs422

Syntax
control-field <ieee1344|ieeec37-118>

ieee1344 IEEE1344 data transmission. Default.

ieeec37-118 IEEEc37-118 data transmission.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-opt irig_opt-1-1-2-1
ADVA-NE-1:irig_opt-1-1-2-1--> control-field ieee1344

ADVA--> network-element ne-1

ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-rs422 irig_rs422-1-1-2-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 284

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:irig_rs422-1-1-2-1--> control-field ieee1344

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 285

Oscilloquartz: An ADVA Company Commands Reference

cos
Select the Class Of Service for a management tunnel or PTP Flowpoint.

Security Level
Provisioning

Command Level
Configure Management Tunnel

Configure PTP Flowpoint

Syntax
cos <COS>

Guidelines
This command is used to set the Class Of Service (COS) of a management tunnel. COS can
be set from 0 to 7. The default setting for a management tunnel is 7, and for a PTP
Flowpoint the default is 0.

Example:
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> cos 7
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 286

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 287

Oscilloquartz: An ADVA Company Commands Reference

country
Set Country for SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
country <country>

A 2 character identifier for the country.

country
Valid entry: 2 ASCII characters

Guidelines
This command sets the country identifier for a provisioned SSL Certificate.

Example
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> country US
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

delay-asym-comp-mode
Configures delay asymmetry compensation for port, L3 PTP Port, and SOOC.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 288

Oscilloquartz: An ADVA Company Commands Reference

Command Level
Configure PTP Port

Syntax
delay-asym-comp-mode automatic|disabled|manual

When set to manual, specify the delay asymmetry compensation in

delay-asym-comp-val.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> delay-asym-comp-mode manual

ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port

Admin State : management
Operational State : outage
Secondary States : act,sgeo
Alias :
Virtual Port Ctrl : disabled
Master Clock Type : one-step
Master Only : Enabled
Peer Port Identity : Not Available
Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : Not Available
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : faulty
BMCA Role : Not Available
Clock Class : 248
Peer MacAddress : Not Available
Last Announce Message Received : 000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000
Last Sync Message Received : 0000000000000000000000000000000000000000000000000000000
00000000000000000000000000000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 289

Oscilloquartz: An ADVA Company Commands Reference

Last Delay_Resp Message Received : 0000000000000000000000000000000000000000000000000000

00000000000000000000000000000000000000000000000000000000
Last Delay-Req Message Received :
000000000000000000000000000000000000000000000000000000000
000000000000000000000000000
Port Identity : 0080eafffece09000001
Delay Asymetry Mode : disabled
Delay Asymetry Value : 0
Delay Asymetry Status :
Time Traceable Status : Disabled
Frequency Traceable Status : Disabled

Related Commands
delay-asym-comp-val

delay-asym-comp-val
Sets the delay asymmetry compensation value in nanoseconds when delay-asym-comp-
mode is set to manual.

Command Level
Configure PTP Port

Syntax
delay-asym-comp-val <nanoseconds>

The delay compensation value in nanoseconds.

nanoseconds
Valid values: -10000000 to 10000000. Default is 0.

Examples:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> delay-asym-comp-val 346

ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port

Admin State : management
Operational State : outage
Secondary States : act,sgeo
Alias :
Virtual Port Ctrl : disabled
Master Clock Type : one-step
Master Only : Enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 290

Oscilloquartz: An ADVA Company Commands Reference

Peer Port Identity : Not Available

Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : Not Available
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : faulty
BMCA Role : Not Available
Clock Class : 248
Peer MacAddress : Not Available
Last Announce Message Received : 000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000
Last Sync Message Received : 0000000000000000000000000000000000000000000000000000000
00000000000000000000000000000
Last Delay_Resp Message Received : 0000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000
Last Delay-Req Message Received :
000000000000000000000000000000000000000000000000000000000
000000000000000000000000000
Port Identity : 0080eafffece09000001
Delay Asymetry Mode : disabled
Delay Asymetry Value : 0
Delay Asymetry Status :
Time Traceable Status : Disabled
Frequency Traceable Status : Disabled

Related Commands
delay-asym-comp-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 291

Oscilloquartz: An ADVA Company Commands Reference

delay-asymmetry
Set the port's delay asymmetry value in nanoseconds.

Security Level
Provisioning

Command Level
Configure PTP Access Port

Syntax
delay-asymmetry <asymmetry>

Delay Asymmetry is the asymmetry in the delay of the path

connected to the ingress port and path connected to the egress
asymmetry port.
Valid entry: -1000000000 to +1000000000

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-3
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-3--> delay-asymmetry -5
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-3--> show access-port

Admin State : in-service

Operational State : outage
Secondary States : act,faf
Alias :
Delay Asymmetry : -5
Frequency Source : sync-1-1-1-1

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 292

Oscilloquartz: An ADVA Company Commands Reference

delay-compensation
Configure Cable Delay Compensation for a PPS Port, TOD & PPS Port, or ppsx16_group.

Command Level
Configure PPS Port

Configure TOD & PPS Port

Configure ppsx16_group

Syntax
delay-compensation <delay>

Cable Delay Compensation.

Valid entry:
delay
PPS Port or ppsx16_group: -5000000 to 5000000 ns
TOD & PPS Port: -5000000 to 5000000 ns

Examples
Example for a PPS port:

ADVA--> network-element ne-1

ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure pps-port pps-1-1-1-2
ADVA-NE-1:pps-1-1-2--> signal-direction input
ADVA-NE-1:pps-1-1-2--> delay-compensation 24
ADVA-NE-1:pps-1-1-2--> back
ADVA-NE-1:nteosa5422-1-1-1--> show pps-port pps-1-1-2
Admin State : unassigned
Operational State : outage
Alias :
Signal Direction type : output
Squelch Control : never
Input Rate :
Cable Delay Compensation, (ns) : 24

Example for a TOD & PPS port:

ADVA--> network-element ne-1

ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure tod-port tod-1-1-1-1
ADVA-NE-1:tod-1-1-1-1--> signal-direction input
ADVA-NE-1:tod-1-1-1-1--> delay-compensation 24
ADVA-NE-1:tod-1-1-1-1--> back

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 293

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:nteosa5422-1-1-1--> show tod-port tod-1-1-1-1

Admin State : unassigned

Operational State : outage
Alias :
Squelch Control : never
Output Format : nmea
Signal Direction type : input
Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 24
Source Eid : time_clock-1-1-1-1

Example for Configure ppsx16 Line Group command level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure pps-x16 pps_x16-1-1-1
ADVA-NE-1:pps_x16-1-1-1--> configure ppsx16_group-1-1-2-1
ADVA-NE-1:ppsx16_group-1-1-2-1--> delay-compensation 0
ADVA-NE-1:ppsx16_group-1-1-2-1--> show ppsx16_group

Alias :
Admin State : management
Operational State : outage
Secondary State : act,sgeo,faf
Signal Direction type : output
Squelch Control : lock
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1

Related Commands
admin-state signal-direction (pps-port)
alias show pps-port
input-rate show tod-port
signal-direction (tod-port) show ppsx16_group

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 294

Oscilloquartz: An ADVA Company Commands Reference

delay-response-timeout
Configure Delay Response Timeout of a PTP port, L3 PTP port, and SOOC in seconds.

Command Level
Configure PTP Port

Syntax
delay-response-timeout <msg-rate>

Delay Response Timeout in seconds.

msg-rate
Valid entry: 2-128

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> delay-response-timeout 3
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port
Admin State : management
Operational State : normal
Secondary States : act
Alias :
Master Clock Type : one-step
Not Slave : Enabled

Peer Port Identity :

Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Peer Clock Class : 0
Peer MacAddress : 00:80:ea:39:d1:51

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 295

Oscilloquartz: An ADVA Company Commands Reference

Last Announce Message Received :

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
0102002C180000000000000000000000000000000080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

Related Commands
add ptp-port, announce-receipt-timeout, show ptp-clock, show ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 296

Oscilloquartz: An ADVA Company Commands Reference

delay-type
Configure the antenna delay type of the GPS port.

Command Level
Configure GPS Port

Syntax
delay-type <delay-type>

Type of antenna delay

delay-type
Valid entry: meters, nanoseconds

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> delay-type nanoseconds
ADVA-NE-1:gps-1-1-1-1--> show gps-port
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
elevation-mask show gps-port
delay-value show satellite-entries
sat-min1-threshold cno-mask
sat-min2-threshold self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 297

Oscilloquartz: An ADVA Company Commands Reference

delay-value
Configures the antenna delay value in cable length — meters or in time delay —
nanoseconds for the GPS port. You set the delay type in delay-type.

Command Level
Configure GPS Port

Syntax
delay-value <delay-value>

Length of the antenna cable in meters, or number of nanoseconds

to delay.
delay-value
Valid values cable length: 0 to 999,999 meters.
Valid values time delay: –100,000 to 100,000 ns.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnns-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> delay-value 5
ADVA-NE-1:gnss-1-1-1-1--> show gps-port
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
delay-type show gps-port
sat-min1-threshold elevation-mask
sat-min2-threshold show satellite-entries
cno-mask self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 298

Oscilloquartz: An ADVA Company Commands Reference

delete <user-id>
Delete an existing local user Profile.

Security Level
superuser

Command Level
Configure User Security

Syntax
delete <user-id>

The a valid user name.

user-id
Valid entry: Character string - 8 to 32 characters

Guidelines
This command is used to delete an existing local user Profile. It cannot be used to affect
user Profiles that are stored on Remote Authentication Servers.

Examples
ADVA--> configure user-security
ADVA:user-sec--> delete SamanthaTeig
ADVA:user-sec--> show local-user SamanthaTeig

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 299

Oscilloquartz: An ADVA Company Commands Reference

delete activity
Delete a scheduled Syncjack activity.

Security Level
Provisioning

Command Level
Configure Syncjack Schedule

Syntax
delete activity <activity-eid>

Entity identifier of the activity.

activity-eid
Valid entry: syncjack_schedule-1-1-1-n Where:n = 1
to 255.Example: syncjack_schedule-1-1-1-1

Guidelines
This command is used to delete a scheduled Syncjack activity.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure syncjack-schedule
ADVA-NE-1:syncjack:syncjack-schedule--> delete activity syncjack_schedule-1-1-1-1

Related Commands
add activity
show activity
delete activity

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 300

Oscilloquartz: An ADVA Company Commands Reference

delete arp-entry
Delete an existing IP Address from the Address Resolution Protocol (ARP) table.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
delete arp-entry <ip-eid> <ip-address>

IP Entity Identifier.
ip-eid
Valid entry: eth0
IP address.
ip-address
Valid entry: Valid IP Address

Guidelines
This command deletes a static ARP Entry.

Example
ADVA--> configure communication
ADVA:comms--> show arp-entries
|MAC Address |IP Address |Interface |Type
|-------------------|----------------|------------|-----|
|12:23:34:45:56:67 |10.10.10.10 |eth0 |static
|c0:91:34:d7:9f:00 |10.12.8.1 |eth0 |dynamic
|00:0c:29:4a:f8:aa |10.12.15.254 |eth0 |dynamic

ADVA:comms--> delete arp-entry eth0 10.10.10.10

ADVA:comms--> show arp-entries
|MAC Address |IP Address |Interface |Type
|-------------------|----------------|------------|-----|
|c0:91:34:d7:9f:00 |10.12.8.1 |eth0 |dynamic
|00:0c:29:4a:f8:aa |10.12.15.254 |eth0 |dynamic

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 301

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 302

Oscilloquartz: An ADVA Company Commands Reference

delete boundary-clock
Delete a Precision Time Protocol Boundary Clock (PTP BC).

Security Level
Provisioning

Command Level
Configure PTP Network Element

Syntax
delete boundary-clock <bc-eid>

The Entity Identifier of the Boundary Clock to be

bc-eid created.
Valid entry: ptp_bc-1-n,where n=1

Guidelines
This command is used to delete a Boundary Clock.

Example
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show boundary-clock ptp_bc-1-1
Alias : Fitsimmons
Admin State : management
Operational State : normal
Secondary States : act
Ptp Domain Number : 0
Timing Source : ts-1-1
Clock Identity : 0080ea33b0a00001

ADVA:ptp-NE-1--> delete boundary-clock ptp_bc-1-1

ADVA:ptp-NE-1--> show boundary-clock

Related Commands
add boundary-clock show boundary-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 303

Oscilloquartz: An ADVA Company Commands Reference

delete clock-probe
Delete a Syncjack Clock Probe.

Security Level
Provisioning

Command Level
Configure Syncjack

Syntax
delete clock-probe <clock_probe-eid>

Clock Probe EID

clock_probe-eid
Valid entry: clock_probe-1-n; where, n=1-2Example:
clock_probe-1-1

Guidelines
This command is used to delete a Syncjack clock probe. The probe can not be deleted if it is
part of a scheduled activity.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-1
Name : clkprobe1
Current State : completed
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : ts-1-1
Source Type : phase
Measurement Rate, (measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -4
Time of last TIE Result : 2014-10-30,21:32:41
Actual Test Start Time : 2014-10-30,21:25:20
Actual Test Duration, (s) : 59
Scheduler Eid : syncjack_schedule-1-1-1-1
Running Failed Count : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 304

Oscilloquartz: An ADVA Company Commands Reference

Max TE Threshold, (ns) : 0

Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | 12 | OK | OK |
| 2.0s | 16 | OK | OK |
| 5.0s | 16 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 20 | OK | OK |
| 50.0s | 24 | OK | OK |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |
ADVA-NE-1:syncjack:clock-accuracy--> delete clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-1
Error: 256 - Entity does not exist.(CLOCK PROBE)

Related Commands
mtie-mask-margin
add clock-probe
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 305

Oscilloquartz: An ADVA Company Commands Reference

delete community
Delete an existing SNMPv1/v2c Community Entry.

Security Level
superuser

Command Level
Configure SNMP

Syntax
delete community <name>

A character string representing the SNMP

name Community Name.
Valid entry: Character string - up to 64 characters

Guidelines
Delete an existing SNMPv1/v2c Community Entry.

Examples
ADVA--> configure snmp
ADVA:snmp--> delete community GetUpAndGo
ADVA:snmp--> show all-communities

|Community Name |Community Access

|private |readwrite
|public |readonly

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 306

Oscilloquartz: An ADVA Company Commands Reference

delete dynamic-remote-slave
Delete a Dynamic Remote Slave.

Security Level
provisioning

Command Level
Configure Master Clock Interface

Syntax
delete dynamic-remote-slave <ds-eid>

The entity identifier of the Dynamic Remote Slave.

ds-eid Valid entry: dynamic_slave-ne-bc-mci-n; where:
ne=1, bc/mc=1, mci=1, n=up to 1024.

Guidelines
This command is used to delete a Dynamic Remote Slave.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show dynamic-remote-slave dynamic_
slave-1-1-1-1
Alias :
Admin State : management
Operational State : normal
Secondary States : act
Time Created : 2017-07-30,07:55:59
Negotiated Announce Lease Duration : 300
Lease Duration Remain Time : 91
Negotiated Delay Resp Lease Duration : 300
Delay Resp Duration Remain Time : 91
Negotiated Sync Lease Duration : 300
Sync Duration Remain Time : 91
Clock Identity : 0080eafffe7f44500001
Unicast Msg Negotiation : enabled
Slave V4 Address : 22.22.22.2
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 307

Oscilloquartz: An ADVA Company Commands Reference

Delay Resp Msg Rate : 32-pkt-per-sec

Sync Msg Rate : 32-pkt-per-sec

ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> delete dynamic-remote-slave dynamic_

slave-1-1-1-1

Related Commands
delete static-remote-slave show dynamic-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 308

Oscilloquartz: An ADVA Company Commands Reference

delete eqpt
Deletes a line card.

Command Level
Configure network-element

Syntax
delete eqpt <linecard-eid>

Line card entity identifier.

Valid values: linecardtype-ne-shelf-nte-slot, Where:
linecardtype=bits-x16, clk-x16, ge-4s, irig-b, pps-x16, tod-pps-x16,
linecard-eid clk-x4-lpn
ne=1, shelf=1, slot=1-2.
Example: bits_x16-1-1-2

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show bits-x16 bits_x16-1-2
Admin State : in-service
Operational State : outage
Card Type :
Alias :
ADVA-NE-1--> configure bits-x16 bits_x16-1-2
ADVA-NE-1:bits_x16-1-1-2--> admin-state unassigned
ADVA-NE-1:bits_x16bits_x16-1-2--> back
ADVA-NE-1--> delete eqpt bits_x16-1-2
ADVA-NE-1--> show 16xbits bits_x16-1-2

Related Commands
add eqpt, admin-state, alias, show <linecardtype>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 309

Oscilloquartz: An ADVA Company Commands Reference

delete history-result
Delete a history result.

Security Level
Provisioning

Command Level
Configure Syncjack

Syntax
delete history-result <clock_probe-eid>
delete history-result <ptp-clock_probe_result-eid>

Syncjack Clock Probe EID

clock_probe- Valid entry: clock_probe_result-1-n-mWhere:n = 1 (if

eid SyncJack-extended-scaled feature is disabled) or 1-2
(if SyncJack-extended-scaled is enabled)m = 1 to
16Example: clock_probe_result-1-1-1
Syncjack PTP Clock Probe EID
ptp-clock_
probe_ Valid entry for Clock Analysis:
result-eid ptp_clock_probe-result-1-n-m Where: n = 1 to 2m =
1 to 16Example: clock_probe_result-1-1-1

Guidelines

This command is used to delete a Syncjack clock probe history result.

Example
Refer to this example for a Clock Probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> show history-result clock_probe_result-1-1-1
Alias : clkprobe1
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 310

Oscilloquartz: An ADVA Company Commands Reference

Source Eid : ts-1-1

Source Type : phase
Measurement Rate, (measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Actual Test Start Time : 2014-10-30,21:25:20
Actual Test Duration, (s) : 59
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | 12 | OK | OK |
| 2.0s | 16 | OK | OK |
| 5.0s | 16 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 20 | OK | OK |
| 50.0s | 24 | OK | OK |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

ADVA-NE-1:syncjack:clock-accuracy--> delete history-result clock_probe_result-1-1-1

Related Commands
add clock-probe ip-version
add ptp-clock-probe master-ip-address
delete clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show clock-probe name (ne, probe)
show ptp-clock-probe ptp-flowpoint
show syncjack-telecom-slave reference, reference-eid
show history-result slave-ipv4-address
direction source-eid
expected-ql source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 311

Oscilloquartz: An ADVA Company Commands Reference

delete ip-route
Delete an IPv4 route from the routing table.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
delete ip-route <destination> <mask> <gateway> <ip-eid>

The Destination IP Address to delete.

destination
Valid entry: Valid IPv4 address
IP address of next hop Gateway.
gateway
Valid entry: Valid IPv4 gateway Address
IP Entity Identifier.
ip-eid
Valid entry: eth0
The Mask applied to define the subnet of this
mask gateway.
Valid entry: Valid IPv4 Mask

Guidelines
This command deletes a static IPv4 address route. This command requires the route to be
explicitly identified in order to be deleted. If the route type is an interface route, set the
gateway address to 0.0.0.0.

Examples
ADVA--> configure communication
ADVA:comms--> delete ip-route172.17.22.10 255.255.255.255 172.17.22.1 eth0
ADVA:comms--> show ip-routes

|Interface |Mask |Gateway |Destination |Metric

|Type
|---------------|-----------------|-----------------|-----------------|--------
|---------|
|eth0 |255.255.255.0 |0.0.0.0 |10.10.10.0 |3
|static

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 312

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 313

Oscilloquartz: An ADVA Company Commands Reference

delete ipv6-route
Delete an IPv6 static route from the routing table.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
delete ipv6-route <ipv6-address> <prefix-length> <gateway> <ipv6-
interface>

The IPv6 address of the route to be deleted.

ipv6-address
Valid entry: Valid IPv6 address.
The length of the IPv6 address prefix.
prefix-length
Valid entry: 0-128. The default is 0.
The IPv6 gateway address.
gateway
Valid entry: Valid IPv6 gateway address. 0::0 for
interface type route.
The name of the interface associated with this IPv6
ipv6-interface route.
Valid entry: eth0

Guidelines
This command is used to delete an IPv6 static route.

Examples
ADVA--> configure communication
ADVA:comms-->
show ipv6-routes

===========================================================
Interface : eth0
Destination : 2534:3454:0000:0000:0000:0000:0000:0000
Prefix Length : 64
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 28
Advertise : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 314

Oscilloquartz: An ADVA Company Commands Reference

Type : static
===========================================================
Interface : eth0
Destination : FDAA:0000:0000:0000:0000:0000:0000:0000
Prefix Length : 60
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 256
Advertise : enabled
Type : static
===========================================================
ADVA:comms--> show ipv6-routes
===========================================================
Interface : eth0
Destination : FDAA:0000:0000:0000:0000:0000:0000:0000
Prefix Length : 60
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 256
Advertise : enabled
Type : static
===========================================================

Related Commands
dhcpv6-control
add arp-entry
flush-arp-cache ip-mode
add ndp-entry
list mgmttnl ipv6-sys-def-gateway
add ip-route
ping ipv6-unicast-addr
add ipv6-route
ping6 show mgmttnl
add mgmttnl
show arp-entries show ping-result
configure src-addr
show eth0 show src-addr
delete arp-entry
show ip-interface show trace-route-result
delete ip-route
eth0 trace-route
delete mgmttnl
show ip-routes trace-route6
delete ndp-entry
show ipv6-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 315

Oscilloquartz: An ADVA Company Commands Reference

delete master-clock
Delete a Precision Time Protocol Master Clock (PTP MC).

Security Level
Provisioning

Command Level
Configure PTP Network Element

Syntax
delete master-clock <mc-eid>

The Entity Identifier of Master Clock.

mc-eid Valid entry: ptp_master_clock-ne-n;Where: ne=1,
n=1-3.Example: ptp_master_clock-1-1

Guidelines
This command is used to delete a Precision Time Protocol Master Clock (PTP MC).

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show master-clock ptp_master_clock-1-1

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none
PTP Profile : g.8265.1

ADVA:ptp-NE-1--> delete master-clock ptp_master_clock-1-1

ADVA:ptp-NE-1--> show master-clock

Error: 256 - Entity does not exist.(MASTER CLOCK)

Related Commands
add master-clock show master-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 316

Oscilloquartz: An ADVA Company Commands Reference

delete master-virtual-port
Delete a Master Virtual Port.

Security Level
Provisioning

Command Level
Configure Master Clock Interface

Syntax
delete master-virtual-port <mvp-eid>

The Entity Identifier of the Master Virtual Port.

mvp-eid Valid entry: master_virtual_port-ne-bc/mc-mci-n.

Where: ne=1, bc=1, mci=1-4, n=1.Example: master_
virtual_port-1-1-1-3

Guidelines
This command is used to remove a Master Virtual Port.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show master-virtual-port master_
virtual_port-1-1-1-1
Alias : mvp1
Admin State : management
Operational State : outage
Secondary States : sgeo
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1

ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> delete master-virtual-port master_

virtual_port-1-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show master-virtual-port
Error: 256 - Entity does not exist.(MASTER VIRTUAL PORT)

Related Commands
add master-virtual-port show master-virtual-port
admin-state

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 317

Oscilloquartz: An ADVA Company Commands Reference

delete mci
Delete a Precision Time Protocol Master Clock Interface (PTP MCI).

Security Level
Provisioning

Command Level
Configure Boundary Clock

Configure Master Clock

Syntax
delete mci <mci-eid>

Entity Identifier of the Mater Clock Interface.

mci-eid
Valid entry: ptp_ptp_mci-ne-mc-n. Where: ne=1,
bc/mc=1, n=1-416.Example: ptp_ptp_mci-1-1-1

Guidelines
This command is used to delete a Precision Time Protocol Master Clock Interface (PTP MCI).

Examples
Refer to the following example for Configure Master Clock level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show mci ptp_mci-1-1-1
Alias : mci1
Administrative State : management
Operational State : outage
Secondary States : act,sgeo
IPv4 Address : 10.10.10.1
Subnet Mask : 255.255.255.0
IPv6 Address : Not Available
Prefix : Not Available
Interface name : mci001
Clock Type : one-step
Delay Mechanism : end-to-end
IP Version : ipv4
Ip Qos : 1
Ip Priority Mode : none
Max Lease Duration : 300
Max Slaves Supported : 5
Max Static Slaves Supported : 3
Port Identity :
Max Sync Msg Rate : 1-pkt-per-sec

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 318

Oscilloquartz: An ADVA Company Commands Reference

Max Delay Req Msg Rate : 4-pkt-per-sec

Max Announce Msg Rate : 32-pkt-per-sec
Ptp Domain Number : 4
Clock Class Profile : g.8265.1
Clock Class : 0
Announce Ext TLV : Not Available

ADVA:ptp-NE-1:ptp_master_clock-1-1--> delete mci ptp_mci-1-1-1

Related Commands
add mci show mci

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 319

Oscilloquartz: An ADVA Company Commands Reference

delete mgmttnl
Delete a Management Tunnel.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
delete mgmttnl <mgmttnl-eid>

The EID of the management tunnel.

mgmttnl-eid
Valid entry: mgmt_tnl-mgmttnlNum, Where:
mgmttnlNum=1-255.Example: mgmt_tnl-34

Guidelines
This command deletes a management tunnel.

Examples
ADVA--> configure communication
ADVA:comms--> delete mgmttnl ?
mgmt_tnl-1 Delete the management tunnel
mgmt_tnl-88 Delete the management tunnel
ADVA:comms--> delete mgmttnl mgmt_tnl-88

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 320

Oscilloquartz: An ADVA Company Commands Reference

delete ndp-entry
Delete an IPv6 static neighbor entry.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
delete ndp-entry <ipv6-interface> <ipv6-address>

The interface name associated with this IPv6 NDP

ipv6- entry.
interface
Valid entry: A valid IPv6 interface.
The IPv6 address of the NDP entity.
ipv6-address
Valid entry: A valid IPv6 Unicast address of an IPv6
neighbor on the interface.

Guidelines
This command is used to delete an IPv6 static Neighbor entry.

Examples
Example of deleting an IPv6 static route interface:

ADVA--> configure communication

ADVA:comms--> show ndp-entries
|MAC Address |IPv6 Address |Interface |Type
|-------------------|------------------------------------------|---------------|---------
|
|ee:ff:dd:ee:1a:03 |0572:1258:0000:0000:0001:0000:0100:0000 |eth0 |static
|00:80:ea:03:03:03 |FDAA:0000:0000:0000:0000:0000:0000:00DD |eth0 |static
|c4:0f:07:e6:00:01 |FE80:0000:0000:0000:C60F:07FF:FEE6:0001 |eth0 |dynamic
ADVA:comms--> delete ndp-entry eth0 0572:1258:0000:0000:0001:0000:0100:0000
ADVA:comms--> show ndp-entries
|MAC Address |IPv6 Address |Interface |Type
|-------------------|------------------------------------------|---------------|---------
|
|00:80:ea:03:03:03 |FDAA:0000:0000:0000:0000:0000:0000:00DD |eth0 |static
|c4:0f:07:e6:00:01 |FE80:0000:0000:0000:C60F:07FF:FEE6:0001 |eth0 |dynamic

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 321

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry dhcpv6-control ip-mode
add ip-route flush-arp-cache ipv6-sys-def-gateway
add ipv6-route list mgmttnl ipv6-unicast-addr
add mgmttnl ping show mgmttnl
add ndp-entry ping6 show ndp-entries
configure src-addr show arp-entries show ping-result
delete arp-entry show eth0 show src-addr
delete ip-route show ip-interface eth0 show trace-route-result
delete ipv6-route show ip-routes trace-route
delete mgmttnl show ipv6-routes trace-route6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 322

Oscilloquartz: An ADVA Company Commands Reference

delete ocs-port
Delete an existing Ordinary Clock Slave (OCS) port.

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
delete ocs-port <ocs_port-eid>

The Entity Identifier of the OCS port.

ocs_port-eid Valid entry: ocs_port-ne-shelf-ts-n. Where: ne=1,
shelf=1, ts=1, n=1. Example: ocs_port-1-1-1-1

Guidelines
This command is used to delete an existing Ordinary Clock Slave (OCS) port.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show ocs-port ocs_port-1-1-1-1
Alias :
Port Identity : 0080ea2fc07000000000
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
PTP State : listening
Admin State : management
Operational State : outage
Secondary States : sgeo
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> delete ocs-port ocs_port-1-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show ocs-port ocs_port-1-1-1-1
Error: 256 - Entity does not exist.(OCS PORT)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 323

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
master-priority
master-syncrcp-timeout
priority-mode
add ocs-port priority-mode-value
admin-state show last-rcv-sync-msg
alias show ocs-port
master-announce-rcpt-timeout show perf-mon
master-ip-address show sooc
slave-ipv4-address
unicast-restart-timer
unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 324

Oscilloquartz: An ADVA Company Commands Reference

delete ptp-clock
Delete a Precision Time Protocol (PTP) Clock.

Security Level
Provisioning

Command Level
Configure PTP Network Element

Syntax
delete ptp-clock <ptp_clock-eid>

The Entity Identifier of PTP Clock.

ptp_clock-
eid Valid entry: ptp_clock-1-nWhere: n=1Example: ptp_
clock-1-1

Guidelines
This command is used to delete a Precision Time Protocol Clock (PTP) Clock.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show ptp-clock ptp_clock-1-1
Admin State : management
Operational State : normal
Secondary States : act
Alias :
PTP Profile : g8275-1
Clock Type : master-only
Oper Mode : t-gm
Clock Identity : 0080ea39d1500001
PTP Domain Number : 24
Time Source : time_clock-1-1-1-1
Priority 1 : 128
Priority 2 : 128
Local Priority : 128
Clock Accuracy : 33
Scaled Log Variance : 20061
Sync Id : none
Current Time Of Day : Not Available
Active Slave Port : none
Clock Recovery State : na
Phase Recovery State : na
Time Traceability Status : disabled
Time Since Time Traceability Changed : 0
Freq Traceability Status : disabled
Time Since Freq Traceability Changed : 0
Sync Reference Mode : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 325

Oscilloquartz: An ADVA Company Commands Reference

QL Mode : disabled
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-eec1
Received QL :

ADVA:ptp-NE-1--> delete ptp-clock ptp_clock-1-1

ADVA:ptp-NE-1--> show ptp-clock ptp_clock-1-1

Error: 256 - Entity does not exist.(PTP CLOCK)

Related Commands
add ptp-clock show ptp-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 326

Oscilloquartz: An ADVA Company Commands Reference

delete ptp-clock-probe
Delete a PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Analysis

Syntax
delete ptp-clock-probe <ptp_clock_probe-eid>

Entity identifier of an Existing Syncjack PTP Clock

ptp_clock_ Probe
probe-eid
Valid entry: ptp_clock_probe-1-n where:n = 1-
4Example: ptp_clock_probe-1-1

Guidelines
This command is used to delete a Syncjack PTP Clock Probe. The probe can not be deleted if
it is part of a scheduled activity.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> delete ptp-clock-probe ptp_clock_probe-1-1

Related Commands
add ptp-clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show ptp-clock-probe master-ip-address
show syncjack-telecom-slave name (ne, probe)
show history-result ptp-flowpoint
direction reference, reference-eid
expected-ql slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 327

Oscilloquartz: An ADVA Company Commands Reference

delete ptp-fp
Delete an existing PTP Flow Point.

Command Level
Configure PTP Access Port

Syntax
delete ptp-fp <ptp_fp-eid>

The Entity identifier of the PTP Flow Point.

ptp_fp-eid Valid entry: For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-n.

Where: ne=1, shelf=1, slot=1, port=1, n=1-m (max ptp flow
points). Example: acc_ptp_flow_pt-1-1-1-3-1.

Examples
ADVA:ptp-NE-1:netosa5422:access-1-1-1-1--> delete ptp-fp acc_ptp_flow_pt-1-1-1-1-1

Related Commands
add ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 328

Oscilloquartz: An ADVA Company Commands Reference

delete ptp-network-probe
Delete a Syncjack PTP network probe.

Security Level
Provisioning

Command Level
Configure PTP Network Analysis

Syntax
delete ptp-network-probe <ptp_network_probe-eid>

Probe EID
ptp_network_
probe-eid Valid entry: ptp_network_probe-1-n Where:n =
1Example: ptp_network_probe-1-1

Guidelines
This command is used to delete a Syncjack PTP network probe. The probe can not be
deleted if it is part of a scheduled activity.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> delete ptp-network-probe ptp_network_probe-1-1

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 329

Oscilloquartz: An ADVA Company Commands Reference

delete ptp-port
Delete a Precision Time Protocol (PTP) Port.

Security Level
Provisioning

Command Level
Configure PTP Clock

Syntax
delete ptp-port <ptp_port-eid>

The Entity Identifier of PTP Port.

ptp_port-eid Valid entry: ptp_port-1-m-nWhere: m=ptp clock

number, n=1-max ptp port numberExample: ptp_
port-1-1-1

Guidelines

This command is used to delete a Precision Time Protocol Clock (PTP) Port.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-port ptp_port-1-1-1

Admin State : management

Operational State : normal
Secondary States : act
Alias :
Master Clock Type : one-step

Not Slave : Enabled

Peer Port Identity :

Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 330

Oscilloquartz: An ADVA Company Commands Reference

Sync Receipt Timout : 3

Delay Resp Timout : 3
Expected Clock Class : Not Available
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 0
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
0102002C180000000000000000000000000000000080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

ADVA:ptp-NE-1:ptp_clock-1-1--> delete ptp-port ptp_port-1-1-1

ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-port ptp_port-1-1-1

Error: 256 - Entity does not exist.(PTP PORT)

Related Commands
add ptp-port show ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 331

Oscilloquartz: An ADVA Company Commands Reference

delete sooc
Delete a Slave Only Ordinary Clock (SOOC).

Security Level
Provisioning

Command Level
Configure Telecom Slave

Syntax
delete sooc <sooc-eid>

Entity Identifier of SOOC.

sooc-eid Valid entry: sooc-ne-ts-n, Where: ne=1, ts=1, n=1-2.
Example: sooc-1-1-1

Guidelines
This command is used to delete a Slave Only Ordinary Clock (SOOC).

Examples
Refer to this example:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> show sooc sooc-1-1-1

Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave IPv4 Address : 110.110.10.10
Slave Subnet Mask : 255.255.255.0
Slave IPv6 Address : Not Available
Slave Prefix : Not Available
Interface name : sooc1
Current Offset From Master, (ns) : 0
Current History 15 min. Index : 0
Master Clock Type :
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 332

Oscilloquartz: An ADVA Company Commands Reference

Master Priority : 128

Master IP Version : ipv4
Master IPv4 Address : 110.110.110.10
Master IPv6 Address : Not Available
Master Announce Message Rate : 1-pkt-per-16-sec
Master Announce Receipt Timeout, (intervals) : 2
Master Delay Response Message Rate : 32-pkt-per-sec
Master Delay Response Receipt Timeout,
(intervals) : 255
Master Sync Message Rate : 32-pkt-per-sec
Master Sync Receipt Timeout, (intervals) : 255
Master Lease Duration, (s) : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1
Expected Clock Class : 247
E2E Asymmetry Delay Comp Mode : automatic
E2E Asymmetry Delay Comp Status : operational
E2E Asymmetry Delay Comp Value, (ns) : -50
Lockout Control : disabled
Protection State : active
WTR : false
Clock Recovery State : normal
Phase Recovery State : normal
ADVA:ptp-NE-1:ts-1-1--> delete sooc sooc-1-1-1

Related Commands
add sooc priority-mode
admin-state priority-mode-value
alias show last-rcv-sync-msg
master-announce-rcpt-timeout show perf-mon
show sooc
master-priority unicast-restart-timer
master-syncrcp-timeout unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 333

Oscilloquartz: An ADVA Company Commands Reference

delete static-remote-slave
Delete a Static Remote Slave entity.

Security Level
Provisioning

Command Level
Configure Master Clock Interface

Syntax
delete static-remote-slave <srs-eid>

The entity identifier of the Static Remote Slave.

srs-eid Valid entry: static_slave-ne-mc/bc-mci-n; Where:
ne=1, mc/bc=1, mci=1, n=1-4 or 1-16.

Guidelines
This command is used to remove a Static Remote Slave.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show static-remote-slave
static_slave-1-1-1-1

Alias : srs1
Admin State : management
Operational State : outage
Secondary States : sgeo
Time Created : 2017-06-25,10:25:17
Negotiated Announce Lease Duration : 0
Lease Duration Remain Time : 0
Negotiated Delay Resp Lease Duration : 0
Delay Resp Duration Remain Time : 0
Negotiated Sync Lease Duration : 0
Sync Duration Remain Time : 0
Clock Identity : 00000000000000000
Unicast Msg Negotiation : disabled
Slave V4 Address : 110.101.101.101
Slave V6 Address : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 334

Oscilloquartz: An ADVA Company Commands Reference

Announce Msg Rate : 1-pkt-per-1-sec

Delay Resp Msg Rate : 2-pkt-per-sec
Sync Msg Rate : 1-pkt-per-sec

ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> delete static-

remote-slave static_slave-1-1-1-1

ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show static-

remote-slave static_slave-1-1-1-1

Error: 256 - Entity does not exist.(STATIC SLAVE)

Related Commands
add static-remote-slave admin-state
alias delete dynamic-remote-slave
show static-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 335

Oscilloquartz: An ADVA Company Commands Reference

delete syncref
Delete an entry from the Sync Reference list.

Security Level
Provisioning

Command Level
Configure Sync

Syntax
delete syncref <syncref-eid>

The number assigned to an available syncref

interface eid (ref-eid). Valid entry: syncref-ne-shelf-
syncref-eid slotnumber-syncref index, Where: ne=1, shelf=1,
slotnumber=1syncref index=1-2.Example: syncref-1-
1-1-1

Guidelines
This command is used to delete an entry from the Sync Reference list. For the current
release only one entry is allowed. To change the syncref, the existing reference must be
deleted using delete syncref, then the new syncref is entered using the add syncref
command.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> delete syncref ?
syncref-1-1-1-1-1 Delete a SYNC Reference
syncref-1-1-1-1-2 Delete a SYNC Reference
ADVA-NE-1:sync-1-1-1-1--> delete syncref syncref-1-1-1-1-2
ADVA-NE-1:sync-1-1-1-1--> show syncref ?
syncref-1-1-1-1-1 The SYNCREF Entity Identifier

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 336

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 337

Oscilloquartz: An ADVA Company Commands Reference

delete target-address
Delete an existing Target Address Entry.

Security Level
Provisioning

Command Level
Configure SNMP

Syntax
delete target-address <address-name>

A character string representing the SNMP Target

address-name Address Name.
Valid entry: Character string -1 to 64 characters.

Guidelines
Delete an existing Target Address Entry.

Examples:
Example of deleting a Target Address Entry:

ADVA--> configure snmp

ADVA:snmp--> show all-target-addresses

Target Address Name : TA2

Transport Address : [2444:0000:0000:0000:0000:0000:0000:000B]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled
===========================================================
Target Address Name : ta_new
Transport Address : [2333:0000:000:0000:0000:0000:0000:000A]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 338

Oscilloquartz: An ADVA Company Commands Reference

SNMP Dying Gasp : disabled

Dying Gasp Active : disabled
===========================================================
ADVA:snmp--> delete target-address ta_new
ADVA:snmp--> show all-target-addresses

Target Address Name : TA2

Transport Address : [2444:0000:0000:0000:0000:0000:0000:000B]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled
===========================================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 339

Oscilloquartz: An ADVA Company Commands Reference

delete target-params
Delete an existing Target Parameters Entry.

Security Level
Provisioning

Command Level
Configure SNMP

Syntax
delete target-params <name>

A character string representing the SNMP Target

name Parameters Name.
Valid entry: Character string - 0 to 64 characters

Guidelines
Delete an existing Target Parameters Entry.

Examples
ADVA--> configure snmp
ADVA:snmp--> delete target-params GoForIt
ADVA:snmp--> show all-target-params

Security Model : snmpv1

Security Name : private
Target Params Name : ShowTime
Security Level : no-auth
*******************************************

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 340

Oscilloquartz: An ADVA Company Commands Reference

delete telecom-slave
Delete an existing Telecom Slave. You cannot delete a telecom slave that is used as time
reference or other entity.

Command Level
PTP Network Element

Syntax
delete telecom-slave <ts-eid>

Entity Identifier of the Transparent Clock.

ts-eid
Valid entry:ts-ne-n, where: ne-1, n=1.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> delete telecom-slave ts-1-1

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 341

Oscilloquartz: An ADVA Company Commands Reference

delete timeref
Delete a Time Reference.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
delete timeref <timeref-eid>

The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
This command is used to delete a Time Reference.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-2

Alias :
Priority : 2
Source : ts-1-1
Status : ref-ok
State : standby

ADVA-NE-1:time_clock-1-1-1-1--> delete timeref timeref-1-1-1-1-2

ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-2
Error: 256 - Entity does not exist.(TIMEREF)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 342

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref list syncref
show time-clock
add timeref lockout
sync-alias
admin-state manual-switch
sync-ref-alias
clear network-clock-type
sync-ref-candidate
clear-lockout priority (sync/timeclock)
time-clock-alias
clear-wtr selection-mode
time-holdover-
delete syncref show alarm-attributes
performance
delete timeref show sync
time-ref-alias
expected-ql show sync-available-refs
wtr-time
forced-switch show syncref

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 343

Oscilloquartz: An ADVA Company Commands Reference

delete usm-user
Delete an existing USM User.

Security Level
superuser

Command Level
Configure SNMP

Syntax
delete usm-user <name> <engine-id>

A human readable string representing the name of

name the user.
Valid entry: Character string - 0 to 64 characters
An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent own
snmpEngineID value.
engine-id
Valid entry: Character string - 5 to 32 characters.
Enter ‘local’ for Local Engine ID or full remote Engine
ID.

Guidelines
Delete an existing USM User.

Examples
ADVA--> configure snmp
ADVA:snmp--> delete usm-user McCracken simple
ADVA:snmp--> show all-usm-users

User Name : ADMIN

User Security Name : ADMIN
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : Wrong engineId
User Privacy Key : *****
===========================================================
User Name : MONITOR
User Security Name : MONITOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 344

Oscilloquartz: An ADVA Company Commands Reference

User Auth Key : *****

User Access Type : readwrite
User Engine ID : Wrong engineId
User Privacy Key : *****
===========================================================
User Name : OPERATOR
User Security Name : OPERATOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol

User Auth Key : *****

User Access Type : readwrite
User Engine ID : Wrong engineId
User Privacy Key : *****
===========================================================
User Name : PROVISION
User Security Name : PROVISION
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : Wrong engineId
User Privacy Key : *****
===========================================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 345

Oscilloquartz: An ADVA Company Commands Reference

description (config-file)
Allows appending a description to an existing config file.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
description <filename> <description>

Guidelines
This command allows adding a description to a config file, usually to make identification of
the config file easier. The description can be up to 128 characters long, alphanumeric with
no spaces.

Examples
ADVA--> admin config-file
ADVA:config-file--> description config1 original_instal_db
ADVA:config-file--> list

|File Name |Description

|----------------------|--------------------------------|
|configfile1 |original_instal_db

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 346

Oscilloquartz: An ADVA Company Commands Reference

dhcp-client-id
Configure the DHCP client id associated with this IPv4 Interface.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
For DCN (eth0)
configure <ip-eid> dhcp-client-id <client-id>

IPv4 Entity Identifier.

ip-eid
Valid entry: eth0
Desired client-id
client-id Default: System Name
Valid entry: up to 254 characters

For Management Tunnel

dhcp-client-id

Desired client-id, up to 254 characters

client-id
Default: System Name

Guidelines
This command allows the user to designate a client id being sent to a DHCP server. Used
only if DHCP-client-id-control is enabled. The client ID can be up to 254 characters and the
default is the system name.

Examples
For DCN (eth0)

ADVA--> configure communication

ADVA:comms--> configure eth0 dhcp-client-id 5422
ADVA:comms--> show eth0
Name : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 347

Oscilloquartz: An ADVA Company Commands Reference

IP Address : 172.17.23.22
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:15:02:b0
System Default Gateway : 172.17.23.1

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> dhcp-client-id OSA 5422
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 348

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry ip-address (comms)
add ip-route ip-mode
add mgmttnl list mgmttnl
buffer-size netmask
cir rip2Pkts-control
cos show mgmttnl
dhcp-client-id svlan-control
dhcp-client-id-control svlan-id
dhcp-control sys-def-gateway
eir vlan-id

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 349

Oscilloquartz: An ADVA Company Commands Reference

dhcp-client-id-control
Configure the DHCP client id control associated with this IPv4 Interface.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
For DCN (eth0)
configure <ip-eid> dhcp-client-id-control <control>

IPv4 Entity Identifier.

ip-eid Valid entry: eth0 and any other configured interface
name.
Enable or Disable DHCP client id on this interface.
control
Valid entry: enabled, disabled; Default: disabled.

For Management Tunnel

dhcp-client-id-control <control>

Enable or Disable DHCP client id on this interface.

control
Valid entry: enabled, disabled; Default: disabled.

Guidelines
This command configures the DHCP client id control associated with this IPv4 Interface.

Examples
For DCN (eth0):

ADVA--> configure communication

ADVA:comms--> configure eth0 dhcp-client-id-control disabled
ADVA:comms--> show eth0
Name : eth0
IP Address : 172.17.23.22
Netmask : 255.255.255.0
DHCP Role : dhcp-client

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 350

Oscilloquartz: An ADVA Company Commands Reference

DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:15:02:b0
System Default Gateway : 172.17.23.1

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> dhcp-client-id-control disabled
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 351

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 352

Oscilloquartz: An ADVA Company Commands Reference

dhcp-control
Configure the Dynamic Host Configuration Protocol (DHCP) control associated with this
IPv4 Interface.

Command Level
Configure Communications

Configure Management Tunnel

Syntax
configure <ip-eid> dhcp-control <control>

IPv4 Entity Identifier.

ip-eid
Valid entry: eth0
Enable or Disable DHCP on this interface.
control
Valid entry: enabled, disabled; Default: disabled.

For Management Tunnel

dhcp-control enabled

or

dhcp-control disabled <ip-address> <ip-mask>

IP address of the management tunnel.

ip-address
Valid entry: Valid IP Address
The Mask applied to define the subnet of this management tunnel.
ip-mask
Valid entry: Valid IP Mask

Examples
For DCN (eth0)

ADVA--> configure communication

ADVA:comms--> configure eth0 dhcp-control enabled
ADVA:comms--> show eth0

Name : eth0

IP Address : 192.168.0.2

Netmask : 255.255.255.0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 353

Oscilloquartz: An ADVA Company Commands Reference

DHCP Role : dhcp-server

DHCP : enabled

MTU : 1500

Layer 2 Service : Not Available

Name

Physical Address : 00:80:ea:02:62:00

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> dhcp-control disabled 120.120.120.10 255.255.255.0
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

Related Commands
ip-address (comms)
add arp-entry list mgmttnl
add ip-route netmask
add mgmttnl rip2Pkts-control
buffer-size show mgmttnl
dhcp-client-id svlan-control
dhcp-client-id-control svlan-id
dhcp-control sys-def-gateway
vlan-id

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 354

Oscilloquartz: An ADVA Company Commands Reference

dhcp-ntp-server-control
Enable or disable retrieving Network Time Protocol (NTP) Server IP address on a
Management DCN or Management Tunnel.

Security Level
Provisioning

Command Level
Configure Communication

Configure Management Tunnel

Syntax
For DCN (eth0):

configure eth0 dhcp-ntp-server-control <ntp-svr-ctrl>

For Management Tunnel:

dhcp-ntp-server-control <ntp-svr-ctrl>

Whether to retrieve System Log Server IP addresses

on a Management DCN or Management Tunnel.
ntp-svr-ctrl
Valid values: enabled, disabled. The default is
disabled.

Guidelines

This command is used to enable or disable retrieving NTP Server IP address on a

Management DCN or Management Tunnel.

When DHCP NTP Server is enabled, the NTP Server IP address from DHCP server is
accepted, but the system uses the NTP Server IP address only when the NTP Server Type is
set to DCHP at system level.

At any time, DHCP NTP server can be enabled at one Management Interface at most.

Examples
ADVA--> configure Communication
ADVA:comms--> show ip-interface eth0

Name : eth0
IP Mode : ipv4-only

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 355

Oscilloquartz: An ADVA Company Commands Reference

MTU (bytes) : 1500

MAC Address : 00:80:ea:38:09:a0
IP Address : 10.190.9.98
Netmask : 255.255.0.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID Type : mac-addr
DHCP Client ID : 00:80:ea:38:09:a0
DHCP Class ID Control : enabled
DHCP Host Name Control : enabled
DHCP Host Name Type : system-name
DHCP Host Name : FSP150CC-GE114SH
DHCP LOG Server Control : disabled
DHCP NTP Server Control : enabled
RIPv2 : disabled
IPv4 System Default Gateway : 10.190.0.1

Refer to the following example for Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-2
ADVA:comms:mgmt_tnl-2--> dhcp-ntp-server-control enabled
ADVA:comms--> show mgmttnl

Tunnel Name : mtn2

Associated Port : access-1-1-1-3
Encapsulation Type : ethernet
Tunnel Mode : vlan-based
C-tag VLAN ID : 4095
C-tag VLAN : enabled
S-tag VLAN ID : 4095
S-tag VLAN : disabled
COS : 7
MTU (bytes) : 1500
IP Mode : ipv4-only
IP Address : 0.0.0.0
Subnet Mask : 0.0.0.0
DHCP : enabled
DHCP Client ID Control : enabled
DHCP Client ID Type : system-name
DHCP Client ID : FSP150CC-GE114SH
DHCP Class ID Control : enabled
DHCP Host Name Control : enabled
DHCP Host Name Type : user-defined
DHCP Host Name : SH-001
DHCP LOG Server Control : enabled
DHCP NTP Server Control : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 356

Oscilloquartz: An ADVA Company Commands Reference

RIPv2 : disabled
System Default Gateway : 10.190.0.1
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000

Related Commands
dhcp-client-id
dhcp-client-id-control dhcp-role
dhcp-control

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 357

Oscilloquartz: An ADVA Company Commands Reference

dhcp-role
Configure the DHCP role associated with this IPv4 (eth0) Interface.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
configure eth0 dhcp-role <dhcp_role>

Enter the DHCP role for this interface.

dhcp_role
Valid entry: dhcp-client, dhcp-server

Guidelines
This command configures the DHCP role associated with this IPv4 Interface. Only the
Management LAN interface (eth0) is capable of functioning as a DHCP Server. If configured
as a DHCP Server, the Netmask assigned determines the range of IP addressees the server
manages.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 dhcp-role dhcp-server
ADVA:comms--> show eth0

Name : eth0

IP Address : 192.168.0.2

Netmask : 255.255.255.0

DHCP Role : dhcp-server

DHCP : enabled

MTU : 1500

Layer 2 Service Name : Not Available

Physical Address : 00:80:ea:02:62:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 358

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 359

Oscilloquartz: An ADVA Company Commands Reference

dhcpv6-control
Enable or disable DHCP version 6 on an IPv6 interface. This IPv6 attribute is only displayed,
when the ip-mode is set to ipv4-and-ipv6. Otherwise, only the IPv4 attributes are
displayed.

If stateless address auto configuration is enabled, an interface cannot work as an IPv6 server
(see stateless-addr-auto-cfg for more information).

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
(eth0)configure eth0 dhcpv6-control <control> [<ipv6-address> <prefix-length>] [<ipv6-
def-gateway>]

Enable or Disable DHCPv6 on this interface.

control
Valid entry: enabled, disabled; Default: disabled.
The IPv6 Unicast address for an interface. It is required if an
ipv6-address interface is configured as DHCP-server or DHCP is disabled.
Valid entry: Valid IPv6 address.
The prefix length of the IPv6 address.
prefix-length
Valid entry: 0-128.
The IPv6 address of the default IPv6 gateway. This parameter is
ipv6-defgateway optional.
Valid entry: Valid IPv6 address of gateway.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 dhcpv6-control disabled
FDAA:0000:0000:0000:0000:0000:0000:000A 64
ADVA:comms--> show eth0
Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 360

Oscilloquartz: An ADVA Company Commands Reference

DHCP Role : dhcp-client

DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
ip-address (comms)
add ndp-entry
ip-mode
add ip-route
ipv6-sys-def-gateway
add ipv6-route
ipv6-unicast-addr
add mgmttnl
list mgmttnl
buffer-size
netmask
cir
rip2Pkts-control
cos
show mgmttnl
dhcp-client-id
svlan-control
dhcp-client-id-control
svlan-id
dhcpv6-control
sys-def-gateway
eir
vlan-id
rip-ng-control
show eth0
ping6
trace-route6
prefix-length

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 361

Oscilloquartz: An ADVA Company Commands Reference

direction
Set the direction of a Syncjack PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure syncjack

Syntax
direction <measurement-dir>

measurement- Direction of measurement.

dir Valid entry: master-to-slave, slave-to-master.

Guidelines
This command is used to configure measurement direction for a Syncjack probe. The
measurement direction can not be edited if the clock probe belongs to an active schedule.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> direction slave-to-master
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1
Name : doctest2
Current State : not-scheduled
Reference Failure : yes
No Time Stamp Failure : no
No Event Message Failure : yes
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-2
IP Version : ipv4
Slave Ip Address : 123.123.123.123
Master Ip Address : 123.123.123.1
Direction : slave-to-master
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 362

Oscilloquartz: An ADVA Company Commands Reference

Raw Data Collection : enabled

Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -1
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |
| 10000.0s | 37 | OK | OK |
| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 363

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ptp-clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show ptp-clock-probe master-ip-address
show syncjack-telecom-slave name (ne, probe)
show history-result ptp-flowpoint
direction reference, reference-eid
expected-ql slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 364

Oscilloquartz: An ADVA Company Commands Reference

drop-echo-requests
Define whether to accept or block echo requests for ICMPv4/ICMPv6 packets.

Security Level
provisioning

Command Level
ICMPv4

ICMPv6

Syntax
drop-echo-requests <control>

Define whether to accept or block echo requests for

ICMPv4/ICMPv6 packets.

control Valid entry: enabled or disabled. The default is

configured to accept these packets as this filter is set
to disabled. To block echo requests, set this filter
to enabled.

Guidelines
This command is used to to accept or block echo requests for ICMPv4/ICMPv6 packets.

For ICMPv4: This setting is only configurable when the icmpv4-filter command is enabled.

For ICMPv6: This setting is only configurable when the icmpv6-filter command is enabled.

Examples
Example of blocking echo requests for ICMPv4 packets:

ADVA--> configure system

ADVA:system--> icmpv4
ADVA:system:icmpv4--> drop-echo-requests enabled
ADVA:system:icmpv4--> b
ADVA:system--> show icmpv4

ICMPv4 Filter : enabled

Drop Echo Requests : enabled

Example of blocking echo requests for ICMPv6 packets:

ADVA--> configure system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 365

Oscilloquartz: An ADVA Company Commands Reference

ADVA:system--> icmpv6
ADVA:system:icmpv6--> drop-echo-requests enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : enabled
Drop Router Solicitations : disabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : disabled

Related Commands
drop-neighbor-advertisement show icmpv4
drop-neighbor-solicitation show icmpv4
drop-router-advertisement show icmpv4
drop-router-solicitation show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 366

Oscilloquartz: An ADVA Company Commands Reference

drop-neighbor-advertisement
Define whether to accept or block neighbor advertisement requests for ICMPv6 packets.

Security Level
provisioning

Command Level
ICMPv6

Syntax
drop-neighbor-advertisement <control>

Define whether to accept or block neighbor

advertisement requests for ICMPv6 packets.

control Valid entry: enabled or disabled. The default is

configured to accept these packets as this filter is set
to disabled. To block neighbor advertisement
requests, set this filter to enabled.

Guidelines
This command is used to accept or block neighbor advertisement requests for ICMPv6
packets.

This setting is only configurable when the icmpv6-filter command is enabled.

Examples
Example of blocking neighbor advertisement requests for ICMPv6 packets:

ADVA--> configure system

ADVA:system--> icmpv6
ADVA:system:icmpv6--> drop-neighbor-advertisement enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : disabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : enabled
Drop Neighbor Solicitations : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 367

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
drop-echo-requests show icmpv4
drop-neighbor-solicitation show icmpv4
drop-router-advertisement show icmpv4
drop-router-solicitation show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 368

Oscilloquartz: An ADVA Company Commands Reference

drop-neighbor-solicitation
Define whether to accept or block neighbor solicitation requests for ICMPv6 packets.

Security Level
provisioning

Command Level
ICMPv6

Syntax
drop-neighbor-solicitation <control>

Define whether to accept or block neighbor

solicitation requests for ICMPv6 packets.

control Valid entry: enabled or disabled. The default is

configured to accept these packets as this filter is set
to disabled. To block neighbor solicitation
requests, set this filter to enabled.

Guidelines
This command is used to accept or block neighbor solicitation requests for ICMPv6 packets.

This setting is only configurable when the icmpv6-filter command is enabled.

Examples
Example of blocking neighbor solicitation requests for ICMPv6 packets:

ADVA--> configure system

ADVA:system--> icmpv6
ADVA:system:icmpv6--> drop-neighbor-solicitation enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : disabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 369

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
drop-echo-requests show icmpv4
drop-neighbor-advertisement show icmpv4
drop-router-advertisement show icmpv4
drop-router-solicitation show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 370

Oscilloquartz: An ADVA Company Commands Reference

drop-router-advertisement
Define whether to accept or block router advertisement requests for ICMPv6 packets.

Security Level
provisioning

Command Level
ICMPv6

Syntax
drop-router-advertisement <control>

Define whether to accept or block router

advertisement requests for ICMPv6 packets.

control Valid entry: enabled or disabled. The default is

configured to accept these packets as this filter is set
to disabled. To block router advertisement
requests, set this filter to enabled.

Guidelines
This command is used to accept or block router advertisement requests for ICMPv6 packets.

This setting is only configurable when the icmpv6-filter command is enabled.

Examples
Example of blocking router advertisement requests for ICMPv6 packets:

ADVA--> configure system

ADVA:system--> icmpv6
ADVA:system:icmpv6--> drop-router-advertisement enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : disabled
Drop Router Advertisement : enabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 371

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
drop-echo-requests show icmpv4
drop-neighbor-advertisement show icmpv4
drop-neighbor-solicitation show icmpv4
drop-router-solicitation show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 372

Oscilloquartz: An ADVA Company Commands Reference

drop-router-solicitation
Define whether to accept or block router solicitation requests for ICMPv6 packets.

Security Level
provisioning

Command Level
ICMPv6

Syntax
drop-router-solicitation <control>

Define whether to accept or block router solicitation

requests for ICMPv6 packets.

control Valid entry: enabled or disabled. The default is

configured to accept these packets as this filter is set
to disabled. To block neighbor solicitation
requests, set this filter to enabled.

Guidelines
This command is used to accept or block router solicitation requests for ICMPv6 packets.

This setting is only configurable when the icmpv6-filter command is enabled.

Examples
Example of blocking router solicitation requests for ICMPv6 packets:

ADVA--> configure system

ADVA:system--> icmpv6
ADVA:system:icmpv6--> drop-router-solicitation enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : enabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 373

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
drop-echo-requests show icmpv4
drop-neighbor-advertisement show icmpv4
drop-neighbor-solicitation show icmpv4
drop-router-advertisement show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 374

Oscilloquartz: An ADVA Company Commands Reference

dst-control
Enable or disable configuring the Daylight Saving Time.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-control <control>

Whether to enable or disable Daylight Saving Time.

control
Valid entry: enabled or disabled.

Guidelines
This command is used to enable or disable configuring the Daylight Saving Time.

When this command is disabled only the utc-offset command is configurable. When this
command is enabled, all DST commands and the utc-offset command are configurable.

Examples
Example of enabling to configure the Daylight Saving Time:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-control enabled
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 02:00
DST EndTime : 02:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 375

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-start-month
dst-end-day
dst-start-time
dst-end-month
dst-utc-offset
dst-end-time
show time-zone
dst-start-day
utc-offset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 376

Oscilloquartz: An ADVA Company Commands Reference

dst-end-day
Configure the day in a month when the Daylight Saving Time (DST) ends.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-end-day <Day-of-week>

The day when the DST ends usually using the format:
Day-of-week >= day-of-month or Day-of-
week =< day-of-month.
For example, MONDAY<=18 means that DST ends on
the last Monday before or on the 18th day of the
Day-of-week
specified month.
Valid entry: 1-31 and days of week in capital letters.
The day entered must be valid for the month
entered. For example, for February, the 29th day is
invalid. The default end day is SUNDAY<=7.

Guidelines
This command is used to configure the day in a month when DST ends, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the day in a month when the DST ends:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-end-day MONDAY<=18
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 377

Oscilloquartz: An ADVA Company Commands Reference

DST EndMonth : november

DST StartDay : SUNDAY>=8
DST EndDay : Monday<=18
DST StartTime : 02:00
DST EndTime : 02:00

Related Commands
dst-start-month
dst-control
dst-start-time
dst-end-month
dst-utc-offset
dst-end-time
show time-zone
dst-start-day
utc-offset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 378

Oscilloquartz: An ADVA Company Commands Reference

dst-end-month
Configure the month in a year when the Daylight Saving Time (DST) ends.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-end-month <month>

The month when the DST ends.

Valid entry: january, february, march....december. The
month month entered must be valid for the date entered
using the dst-end-day command. The default month
is november.

Guidelines
This command is used to configure the month in a year when DST ends, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the month in a year when DST ends:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-end-month october
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : october
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=8
DST StartTime : 02:00
DST EndTime : 02:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 379

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-start-month
dst-control
dst-start-time
dst-end-day
dst-utc-offset
dst-end-time
show time-zone
dst-start-day
utc-offset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 380

Oscilloquartz: An ADVA Company Commands Reference

dst-end-time
Configure the time in a day when the Daylight Saving Time (DST) ends.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-end-time <time>

The time when the DST ends.

time Valid entry: hh:mm, where the range of hh is 00-23,

the range of mm is 00-59. The default is set to
02:00.

Guidelines
This command is used to configure the time in a day when the DST ends, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the time in a day when the DST ends:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-end-time 03:00
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 02:00
DST EndTime : 03:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 381

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-start-month
dst-control
dst-start-time
dst-end-day
dst-utc-offset
dst-end-month
show time-zone
dst-start-day
utc-offset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 382

Oscilloquartz: An ADVA Company Commands Reference

dst-start-day
Configure the day in a month when the Daylight Saving Time (DST) starts.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-start-day <day>

The day when the DST starts usually using the

format: Day-of-week >= day-of-month or
Day-of-week =< day-of-month.
For example, Sunday>=15 means that DST starts on
the first Sunday after or on the 15th day of the
day
specified month.
Valid entry: 1-31 and days of week in capital letters.
The day entered must be valid for the month
entered. For example, for February, the 29th day is
invalid. The default start day is SUNDAY>=8.

Guidelines
This command is used to configure the day in a month when the DST starts, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the day in a month when the DST starts:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-start-day MONDAY>=15
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 383

Oscilloquartz: An ADVA Company Commands Reference

DST EndMonth : november

DST StartDay : MONDAY>=15
DST EndDay : SUNDAY<=7
DST StartTime : 02:00
DST EndTime : 02:00

Related Commands
dst-start-month
dst-control
dst-start-time
dst-end-day
dst-utc-offset
dst-end-month
show time-zone
dst-end-time
utc-offset

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 384

Oscilloquartz: An ADVA Company Commands Reference

dst-start-month
Configure the month in a year when the Daylight Saving Time (DST) starts.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-start-month <month>

The month when the DST starts.

Valid entry: january, february, march....december. The
month month entered must be valid for the date entered
using the dst-start-day command. The default
month is march.

Guidelines
This command is used to configure the month in a year when DST starts, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the month in a year when DST starts:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-start-month april
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : april
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 02:00
DST EndTime : 02:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 385

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-control
dst-start-time
dst-end-day
dst-utc-offset
dst-end-month
show time-zone
dst-end-time
utc-offset
dst-start-day

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 386

Oscilloquartz: An ADVA Company Commands Reference

dst-start-time
Configure the time in a day when the Daylight Saving Time (DST) starts.

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-start-time <time>

The time when the DST starts.

time Valid entry: hh:mm, where the range of hh is 00-23,

the range of mm is 00-59. The default is set to
02:00.

Guidelines
This command is used to configure the time in a day when the DST starts, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the time in a day when the DST starts:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-start-time 00:00
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 00:00
DST EndTime : 02:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 387

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-control
dst-start-month
dst-end-day
dst-utc-offset
dst-end-month
show time-zone
dst-end-time
utc-offset
dst-start-day

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 388

Oscilloquartz: An ADVA Company Commands Reference

dst-utc-offset
Configure the offset of the Daylight Saving Time (DST) from the Coordinated Universal Time
(UTC).

Security Level
provisioning

Command Level
Time Zone

Syntax
dst-utc-offset <offset>

The offset of the DST from the UTC.

offset Valid entry: ± hh:mm. The range is between (-12 to
+14): 00 to 59. The default value is +01:00.

Guidelines
This command is used to configure the offset of the DST from the UTC, and is used with
other commands to configure the DST.

This setting is only configurable when the dst-control command is enabled.

Examples
Example of configuring the offset of the DST from the UTC:

ADVA--> configure system

ADVA:system--> time-zone
ADVA:system:timezone--> dst-utc-offset +10:00
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +10:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 00:00
DST EndTime : 02:00

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 389

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
dst-control
dst-start-month
dst-end-day
dst-start-time
dst-end-month
show time-zone
dst-end-time
utc-offset
dst-start-day

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 390

Oscilloquartz: An ADVA Company Commands Reference

eir
Set the Excess Information Rate (EIR) for a management tunnel, PTP flow point, or NTP flow
point.

Command Level
Configure Management Tunnel

Configure PTP

Syntax
eir <eir>

The EIR value.

eir
Valid entry: 0 to max port speed, enabled, disabled.

Examples
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> eir 768000
ADVA:comms:mgmt_tnl-1--> show mgmttnl

IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 391

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
ip-address (comms)
add arp-entry
ipv6-unicast-addr
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
prefix-length
cir
rip2Pkts-control
cos
show mgmttnl
dhcp-client-id
svlan-control
dhcp-client-id-control
svlan-id
dhcp-control
sys-def-gateway
eir
vlan-id

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 392

Oscilloquartz: An ADVA Company Commands Reference

elevation-mask
Configures an elevation value. The GNSS receiver ignores satellites that are below this value.

Command Level
Configure GPS Port

Syntax
elevation-mask <integer>

Elevation in degrees.
integer
Valid values: 0 to 90. Default is 20.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nte nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> elevation-mask 20
ADVA-NE-1:gnss-1-1-1-1--> show gps-port
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
delay-type show gps-port
cno-mask delay-value
sat-min1-threshold show satellite-entries
sat-min2-threshold self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 393

Oscilloquartz: An ADVA Company Commands Reference

email
Setting for SSL Certificate.

Security Level
superuser

Command Level
Configure SSL Certificate

Syntax
email <email>

E-mail address for the SSL Certificate.

email
Valid entry: an email address

Guidelines
This command sets the email address for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> email [email protected]
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate

Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 394

Oscilloquartz: An ADVA Company Commands Reference

e-Prtc-Mode
Set whether the Time Clock uses the e-PRTC mode.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
e-Prtc-Mode <control>

Enable/Disable whether the Time Clock uses the e-

control PRTC mode.
Valid entry: enabled, disabled; Default is disabled.

Guidelines
This command is used to enable or disable whether the Time Clock uses the e-PRTC mode.
When enabled, the time clock combines the stable frequency input, such as a Cesium Clock,
to extend the holdover capability to meet the e-PRTC holdover standards. Before
configuring this setting, ensure that you activate the e-PRTC license (see configure feature).

Note: This setting is applicable for Rb/HQ++ oscillators only.

Examples
Example of setting the Time Clock to use the e-PRTC mode:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> e-Prtc-Mode enabled
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : management
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : none
Clock Mode : freerun
User Request Action : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 395

Oscilloquartz: An ADVA Company Commands Reference

User Request Target : none

Leap 59 : disabled
Leap 61 : disabled
Time Traceability Status : not-traceable
Expected QL : ql-none
Current QL : ql-dnu
Time Scale : ptp
Time Holdover Performance : 5000ns
UTC Offset (s) : 37
Current Time Of Day : Not Available
e-PRTC Mode Enabled : enabled

Related Commands
add syncref list syncref
show time-clock
add timeref lockout
sync-alias
admin-state manual-switch
sync-ref-alias
clear network-clock-type
sync-ref-candidate
clear-lockout priority (sync/timeclock)
time-clock-alias
clear-wtr selection-mode
time-holdover-
delete syncref show alarm-attributes
performance
delete timeref show sync
time-ref-alias
expected-ql show sync-available-refs
wtr-time
forced-switch show syncref

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 396

Oscilloquartz: An ADVA Company Commands Reference

expected-ql
Set the Expected Quality Level for an interface.

Security Level
Provisioning

Command Level
Configure Access Port

Configure BITS In

Configure Clock Probe

Configure Telecom Slave

Configure Time Clock

Configure PTP Clock

Configure PTP Clock Probe

Configure PTP Network Probe

Syntax
expected-ql <ql-level>

The Quality Level expected for a reference supporting SSM.

Valid entry for SDH Network Clock: ql-prc, ql-ssu-a, ql-ssu-b, ql-
eec1, ql-none. Default is ql-none.
ql-level
Valid entry for SONET Network Clock: ql-prc, ql-stu, ql-st2, ql-tnc,
ql-st3e, ql-eec2, ql-smc, ql-prov, ql-none. Default is ql-none.
Valid entry for Clock Probe, Time Clock and Telecom Slave: ql-eec1,
ql-none, ql-prc, ql-ssu-a, ql-ssu-b

Guidelines
Indicates the quality level of the reference clock expected on a given interface. Only
effective if the QL Mode for the interface is set to enabled. Choices available for SSM
depend on the "network-clock-type" setting - “option1-sdh" or “option2-sonet". If the
“network-clock-type" is changed, “expected-ql" defaults to “ql-none" regardless of previous
setting.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 397

Oscilloquartz: An ADVA Company Commands Reference

Examples
Example for Configure Clock Probe level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> expected-ql ql-prov
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-prov
Source Eid : time_clock-1-1-1-1
Source Type : phase
...

Related Commands
admin-state
line-code show ptp-clock
alias
network-clock-type show telecom-slave
assumed-ql
ql-mode show time-clock
bits-line-type
sa-bit squelch-ctrl
clock-recovery-mode
show alarm-attributes squelch-ql
e-Prtc-Mode
show bits-in sync-id
expected-ql
show bits-out sync-ref-mode
frame-format (bits)

extension-type
Sets the operation type of the IRIG-B line card.

Command Level
configure irig_group

Syntax
extension-type <extension-cable|none|patch-panel>

extension-cable The line card connects to fan-out cable.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 398

Oscilloquartz: An ADVA Company Commands Reference

none The line card operates standalone.

patch-panel The line card connects to a patch panel with a high density cable.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-group irig_group-1-1-2-1
DVA-NE-1:irig_group-1-1-2-1--> extension-type patch-panel

failure-suspend-time
Sets the time in seconds the GNSS receiver continues to report normal operation despite
failure.

Command Level
Configure GPS-Port

Syntax
failure-suspend-time <integer>

The suspend time in seconds.

integer
Valid values: 3 to 86400 seconds. Default is 3 sec.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> failure-suspend-time 3
ADVA-NE-1:gnss-1-1-1-1--> show gps-port
Admin State : management
Operational State : normal
Alias :
...
Antenna Status : open
GNSS TOD : Not Available
Self-Survey Control : enabled
Coordinate Latitude : N0:0:0.000
Coordinate Longitude : E0:0:0.000
Coordinate Altitude (HAE) : Not Available
Ignore Antenna Condition : disabled
Failure Suspend Time : 3
AGC, (%) : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 399

Oscilloquartz: An ADVA Company Commands Reference

flush-arp-cache
Flush (clear) all entries in the ARP cache table, allowing the system to re-learn IP-address to
MAC-address relationships.

Security Level
Maintenance

Command Level
Configure Communications

Syntax
flush-arp-cache

Guidelines
The Address Resolution Protocol (ARP) function maintains a cache of (IP-address, MAC-
address) tuples which the device has seen on its management network. The ARP cache
supports aging; entries are deleted if they have not been used within 5 minutes. In some
deployments it may be desirable to force the deletion of these entries to force the device to
re-discover the (IP-address, MAC-address) relationship.

Examples
Refer to the following example:

ADVA--> configure communication

ADVA:comms--> flush-arp-cache
ADVA:comms--> show arp-entries

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 400

Oscilloquartz: An ADVA Company Commands Reference

flush-ndp-cache
Flush (clear) all entries in the Neighbor Discover Protocol (NDP) cache table, allowing the
system to re-learn dynamic IPv6 neighbors.

Security Level
Maintenance

Command Level
Configure Communications

Syntax
flush-ndp-cache

Guidelines
This command is used to clear all the entries in the NDP cache table.

Examples
Example of clearing all entries in the NDP cache:

ADVA--> configure communication

ADVA:comms--> flush-ndp-cache
ADVA:comms--> show ndp-entries

Related Commands
add arp-entry delete ndp-entry show ipv6-routes
add ip-route dhcpv6-control ip-mode
add ipv6-route flush-arp-cache ipv6-sys-def-gateway
add mgmttnl list mgmttnl ipv6-unicast-addr
add ndp-entry ping show mgmttnl
configure src-addr ping6 show ping-result
delete arp-entry show arp-entries show src-addr
delete ip-route show eth0 show trace-route-result
delete ipv6-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes trace-route6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 401

Oscilloquartz: An ADVA Company Commands Reference

forced-switch
This operation initiates a Forced Switch request.

There are three types of switches that can be performed:

l lockout
l forced
l manual

Security Level
maintenance

Command Level
Configure Sync

Configure Time Clock

Syntax
forced-switch [<syncref-eid> | <timeref-eid>]

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
MANUAL switch requests are lower in the protection switching hierarchy than automatic
switches while FORCED and LOCKOUT are higher - which means that a LOCKOUT or
FORCED switch request will override a reference failure.

This command initiates a Forced Switch request. For valid entity identifiers, see Equipment /
Entity IDs .

Examples
Example for Configure Sync level:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 402

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : network-1-1-1-1
Clock Mode : locked
Sync QL : ql-eec1
User Request Action : none
User Request Target : none
ADVA-NE-1:sync-1-1-1-1--> forced-switch syncref-1-1-1-1-2
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : network-1-1-1-1
Clock Mode : locked
Sync QL : ql-eec1
User Request Action : forced-switch
User Request Target : syncref-1-1-1-1-2

Example for Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> forced-switch timeref-1-1-1-1-2
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : ts-1-1
Clock Mode : locked
User Request Action : forced-switch
User Request Target : timeref-1-1-1-1-2

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 403

Oscilloquartz: An ADVA Company Commands Reference

Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 404

Oscilloquartz: An ADVA Company Commands Reference

fpp-cluster-assured
Configure the FPP Cluster Range - Assured for PTP Network Probe (ns).

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
fpp-cluster-assured <FPPassured>

FPP assured (in ns).

FPPassured Valid entry: 0-18446744073709551615. Default is
25000

Guidelines
This command allows the configuration of FPP Cluster Range - Assured for PTP Network
Probe (in ns).

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> fpp-cluster-assured 25000
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> show ptp-network-probe

Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 405

Oscilloquartz: An ADVA Company Commands Reference

Actual Test Start Time : N/A

Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe
reference, reference-eid
delete ptp-network-probe
restart-with-configfile
show ptp-network-probe
rpdv-frw-lowrange
expected-ql
rpdv-frw-mediumrange
fpp-cluster-satisfied
rpdv-rev-highrange
ip-version
rpdv-rev-lowrange
master-ip-address
rpdv-rev-mediumrange
name (ne, probe)
show ptp-network-probe
pdv-limit-assured
show ptp-fp
pdv-limit-satisfied
slave-ipv4-address
ptp-flowpoint

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 406

Oscilloquartz: An ADVA Company Commands Reference

fpp-cluster-satisfied
Configure the FPP Cluster Range - Satisfied for PTP Network Probe (ns).

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
fpp-cluster-satisfied <FPPsatisfied>

FPP satisfied (in ns).

FPPsatisfied Valid entry: 0-18446744073709551615. Default is
150000

Guidelines
This command allows the configuration of FPP Cluster Range - Satisfied for PTP Network
Probe (in ns).

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> fpp-cluster-satisfied 150000
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> show ptp-network-probe

Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 407

Oscilloquartz: An ADVA Company Commands Reference

Actual Test Start Time : N/A

Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe
reference, reference-eid
delete ptp-network-probe
restart-with-configfile
show ptp-network-probe
rpdv-frw-lowrange
expected-ql
rpdv-frw-mediumrange
fpp-cluster-assured
rpdv-rev-highrange
ip-version
rpdv-rev-lowrange
master-ip-address
rpdv-rev-mediumrange
name (ne, probe)
show ptp-network-probe
pdv-limit-assured
show ptp-fp
pdv-limit-satisfied
slave-ipv4-address
ptp-flowpoint

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 408

Oscilloquartz: An ADVA Company Commands Reference

frame-format (bits)
Select the desired BITS frame format.

Security Level
Provisioning

Command Level
Configure BITS In/Out

Syntax
frame-format <format>

The desired BITS format for either BITS In or BITS

Out. The desired selection is applied to both
interfaces regardless of which one is being edited.
format
Valid entry: for e1: e1-crc4, e1-dualframe. Default is
e1-crc4.for t1: t1-esf, t1-sf. Default is t1-esf.for
2048hz: N/A.

Guidelines
This command allows the user to select the desired BITS frame format. Whether editing the
BITS In or the BITS Out, the selected frame format is mirrored to the other BITS interface,
regardless of the admin-state of that interface. The frame format is subservient to the BITS
Line Type, and the valid selections change accordingly. Settings should be made in the
order of: bits-line-type, line code, frame-format, sa-bit. For valid entry, see Parameter Rules
/ Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-in bits_in-1-1-1-1
ADVA-NE-1:bits_in-1-1-1-1--> frame-format e1-dualframe
ADVA-NE-1:bits_in-1-1-1-1--> line-code e1-hdb3
ADVA-NE-1:bits_in-1-1-1-1--> sa-bit bit5
ADVA-NE-1:bits_in-1-1-1-1--> show bits-in
Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 409

Oscilloquartz: An ADVA Company Commands Reference

Frame Format : e1-dualframe

SA Bit : bit4
QL Mode : disabled
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-nsupp

Related Commands
line-code
admin-state
ql-mode
alias
sa-bit
assumed-ql
show alarm-attributes
bits-line-type
show bits-in
expected-ql
show bits-out
frame-format (bits)
squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 410

Oscilloquartz: An ADVA Company Commands Reference

freq-source
Configure the frequency source.

Command Level
Configure 10MHz Port

Syntax
freq-source <source>

The source of the frequency.

source
Valid entry: For 10mhz-port: sync-1-1-1-1, ts-1-1.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure 10mhz-port clk-1-1-1-1
ADVA-NE-1:nteosa5422-1-1-1:clk-1-1-1-1--> freq-source ts-1-1
ADVA-NE-1:nteosa5422-1-1-1:clk-1-1-1-1--> show 10mhz-port

Admin State : in-service

Operational State : normal
Secondary States : act
Alias :
Signal Direction type : output
Squelch Control : never
Squelch QL : ql-none
Frequency Source : ts-1-1

Related Commands
show 10mhz-port
squelch-ql
squelch-ctrl

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 411

Oscilloquartz: An ADVA Company Commands Reference

ftp
Enable or Disable File Transfer Protocol (FTP).

Security Level
Provisioning

Command Level
Configure System

Syntax
ftp <control>

Enable or Disable File Transfer Protocol.

control
Valid entry: enabled, disabled; Default is enabled.

Examples
ADVA--> configure system
ADVA:system--> ftp enable
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : enabled
...

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 412

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

ftp-port-number
Sets FTP port number.

Command Level
configure system

Syntax
ftp-port-number <ftpPortNumber>

The port number to set.

ftpPortNumber
Valid values: 1 to 65535. The default is 21.

Examples
ADVA--> configure system
ADVA:system--> ftp-port-number 22
ADVA:system--> show system
System Name : OSA 5412 152 DUT
...
System Description : OSA 5412
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
IPv6 Forwarding : disabled
Proxy NDP : disabled
System Default Gateway : 192.168.179.5
Release Version : 11.1.1-227
SNMP Engine ID : 800009f00384c80710c390
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 413

Oscilloquartz: An ADVA Company Commands Reference

HTTPS : enabled
FTP : disabled
FTP Port Number : 22
SFTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 414

Oscilloquartz: An ADVA Company Commands Reference

gnss-system-types
Configure the gnss system type for this entity.

Command Level
Configure GPS Port

Syntax
gnss-system -types <gnss-system-type>

The gnss system type. Valid values:

l gps
l galileo
l glonass
l beidou
l gps + galileo
gnss-system-types l gps + galileo + glonass
l gps + galileo + beidou
l gps + glonass
l gps + beidou
l galileo +glonass
l galileo + beidou
l glonass + beidou

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> gnss-system-types gps
ADVA-NE-1:gps-1-1-1-1--> show gps-port
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 415

Oscilloquartz: An ADVA Company Commands Reference

PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
delay-value pps-generation
delay-type show gps-port
elevation-mask show satellite-entries
sat-min1-threshold cno-mask
sat-min2-threshold self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 416

Oscilloquartz: An ADVA Company Commands Reference

http
Enable or disable HTTP for the system. When enabled, the user can access the GUI interface
using HTTP.

HTTP is an unsecured protocol. Using this protocol to access the system could compromise
the security of the system.

Command Level
Configure System

Syntax
http <control>

Enable or disable HTTP.

control
Valid values: enabled, disabled; default is enabled.

Examples
ADVA--> configure system
ADVA:system--> http enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 417

Oscilloquartz: An ADVA Company Commands Reference

SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 418

Oscilloquartz: An ADVA Company Commands Reference

https
Enable or Disable HTTPS for the system.

Security Level
Provisioning

Command Level
Configure System

Syntax
https <control>

Enable or Disable File Transfer Protocol.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable HTTPS for the system. If enabled, the user can
access the GUI interface using HTTPS.

HTTPS is an secured protocol. Using this protocol to access the system should not
compromise the security of the system.

Examples
ADVA--> configure system
ADVA:system--> https enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version :10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 419

Oscilloquartz: An ADVA Company Commands Reference

Auto log off upon serial port disconnect : enabled

Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
...

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 420

Oscilloquartz: An ADVA Company Commands Reference

icmpv4-filter
Enable or disable configuring the ICMPv4 Filter option.

Security Level
provisioning

Command Level
ICMPv4

Syntax
icmpv4-filter <control>

Whether to enable or disable configuring the

ICMPv4 Filter option.
control
Valid entry: enabled or disabled. The default is
disabled.

Guidelines
This command is used to enable or disable configuring the ICMPv4 Filter option.

When disabled, the filter option cannot be changed.

Examples
Example of enabling to configure the ICMPv4 Filter option:

ADVA--> configure system

ADVA:system--> icmpv4
ADVA:system:icmpv4--> icmpv4-filter enabled
ADVA:system:icmpv4--> b
ADVA:system--> show icmpv4

ICMPv4 Filter : enabled

Drop Echo Requests : disabled

Related Commands
icmpv6-filter
drop-echo-requests
show icmpv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 421

Oscilloquartz: An ADVA Company Commands Reference

icmpv6-filter
Enable or disable configuring the ICMPv6 Filter options.

Security Level
provisioning

Command Level
ICMPv6

Syntax
icmpv6-filter <control>

Whether to enable or disable configuring the

ICMPv6 Filter options.
control
Valid entry: enabled or disabled. The default is
disabled.

Guidelines
This command is used to enable or disable configuring the ICMPv6 Filter option.

When disabled, the filter options cannot be changed.

Examples
Example of enabling to configure the ICMPv6 Filter option:

ADVA--> configure system

ADVA:system--> icmpv6
ADVA:system:icmpv6--> icmpv6-filter enabled
ADVA:system:icmpv6--> b
ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : disabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 422

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
drop-echo-requests
drop-router-solicitation
drop-neighbor-advertisement
icmpv4-filter
drop-neighbor-solicitation
show icmpv6
drop-router-advertisement

ignore-antenna-condition
Sets the GNSS receiver to ignore antenna fault. When set to enabled, the GNSS receiver
continuous to acquire timing signal, GPS port operational state does not change, and a
GPS antenna alarm is reported.

Command Level
Configure GPS-port

Syntax
ignore-antenna-condition <control>

Valid values: enabled or disabled.

control
The default is disabled.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5421-1-1-1
ADVA-NE-1:nteosa5421-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> ignore-antenna-condition enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 423

Oscilloquartz: An ADVA Company Commands Reference

inner<n>-ethertype
Sets the vlan ethertype for a PTP flow point.

Security Level
Provisioning

Command Level
Configure PTP

Configure NTE

Configure Access Port

Configure PTP flow point

Syntax
inner1-ethertype <ethertype>
inner2-ethertype <ethertype>

Guidelines
Set the Ethertype to be used for an inner tag of a PTP flow point.

Valid Ethertype (Hexidecimal) 0x8100 or 0x88A8.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nte nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nte nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-
1-1-1-2
ADVA:ptp-NE-1:nte nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> inner1-
ethertype 0x88A8
ADVA:ptp-NE-1:nte nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> show ptp-
fp
Alias :
PTP Flowpoint Type : monitoring
COS : 7
CIR : 128000
EIR : 0
Buffer Size : 10
PTP Clock : none
EVC : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 424

Oscilloquartz: An ADVA Company Commands Reference

Outer VLAN Ethertype : 33024

Outer VLAN Tag List : 101-1
Inner1 VLAN Ethertype : 34984
Inner1 VLAN Tag List : 101-2
Inner2 VLAN Ethertype : 33024
Inner2 VLAN Tag List : 101-3
Operational State : outage
Admin State : in-service
Secondary States : sgeo

Related Commands
buffer-size inner<n>-vlan-list
cir outer-ethertype
cos outer-untagged
eir outer-vlan-list
inner<n>-untagged show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 425

Oscilloquartz: An ADVA Company Commands Reference

inner<n>-untagged
Enable or disable VLAN tagging associated with a PTP flowpoint.

Security Level
Provisioning

Command Level
Configure PTP

Configure NTE

Configure Access Port

Configure PTP Flowpoint

Syntax
inner1-untagged {disable | enable}
inner2-untagged {disable | enable}

Guidelines
Enable or disable tagging for an inner tag of a PTP Flowpoint. Default is enabled
(untagged).

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-33
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> inner1-
untagged enabled
ADVA:ptp-NE-1:nteosa-1-1-15422:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> show ptp-fp
Alias :
PTP Flowpoint Type : monitoring
COS : 0
CIR : 128000
EIR : 0
Buffer Size : 44
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 100

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 426

Oscilloquartz: An ADVA Company Commands Reference

Inner1 VLAN Ethertype : 0

Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : outage
Admin State : management
Secondary States : sgeo

Related Commands
buffer-size inner<n>-vlan-list
cir outer-ethertype
cos outer-untagged
eir outer-vlan-list
inner<n>-ethertype show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 427

Oscilloquartz: An ADVA Company Commands Reference

inner<n>-vlan-list
Sets the inner vlan list for a PTP Flow Point.

Command Level
Configure PTP

Configure NTP

Configure Access Port

Configure PTP Flowpoint

Syntax
inner1-vlan-list <vlan-eid>
inner2-vlan-list <vlan-eid>

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-2
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> inner1-vlan-
list 101-2
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> show ptp-fp
Alias :
PTP Flowpoint Type : monitoring
COS : 7
CIR : 128000
EIR : 0
Buffer Size : 10
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 101-1
Inner1 VLAN Ethertype : 34984
Inner1 VLAN Tag List : 101-2
Inner2 VLAN Ethertype : 33024
Inner2 VLAN Tag List : 101-3
Operational State : outage
Admin State : in-service
Secondary States : sgeo

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 428

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
buffer-size inner<n>-untagged
cir outer-ethertype
cos outer-untagged
eir outer-vlan-list
inner<n>-untagged show ptp-fp

input-signal-type
Sets the input signal for 10 MHz ports.

Command Level
Configure 10MHz Port

Syntax
input-signal-type <signal>

The input signal of this port.

signal
Valid values: 10mhz or 2048khz

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure aux aux-1-1-x
ADVA-NE-1:aux-1-1-1--> configure 10mhz-port clk-1-1-1-1
ADVA-NE-1:clk-1-1-1-1--> input-signal-type 2048khz

Related Commands
show 10mhz-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 429

Oscilloquartz: An ADVA Company Commands Reference

input-rate
Sets the input rate for a PPS port configured as input (see signal-direction (pps-port)).

Command Level
Configure PPS Port

Syntax
input-rate <rate>

PS input rate.
rate
Valid values: pulse-per-sec

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure pps-port pps-1-1-1-1
ADVA-NE-1:pps-1-1-1-1--> input-rate pulse-per-2-secs
ADVA-NE-1:pps-1-1-1-1--> back
ADVA-NE-1:nteosa5422-1-1-1--> show pps-port pps-1-1-1-1
Admin State : unassigned
Operational State : outage
Alias :
Signal Direction type : input
Squelch Control : never
Input Rate : pulse-per-2-secs
Cable Delay Compensation, (ns) : 0

Related Commands
admin-state input-rate
alias signal-direction (pps-port)
delay-compensation show pps-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 430

Oscilloquartz: An ADVA Company Commands Reference

install
Install new Software into Standby partition. Step two of software upgrade procedure.

The three step software upgrade feature utilizes these commands:

1. Transfer software image to the NE using the transfer-file command.

2. Install new Software into Standby partition using the install command.
3. Activate the new Software using the activate command.

Security Level
Provisioning

Command Level
Admin Upgrade

Syntax
install

Guidelines
This command is used to install a new software package into the standby partition on the
NE. Use the show audit-log to verify when the installation is 100% complete. Once installed,
the new software package can be activated by using the activate command.

If swdl-install-ip (Software Download Install In Progress) condition notification code

is set to anything other than not reported (nr), the condition may be retrieved by using the
show conditions command. Once the installation is complete, the new version shows up in
the standby release version when entering the show release-versions command.

Examples
ADMIN--> admin upgrade
ADMIN:upgrade--> install affectedEntity csm-1
ADMIN:upgrade--> show file-services-status

File Transfer Status : in_progress

File Transfer Percent Complete : 1
Database or Upgrade Current State : SWINSTALL

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |swdl-install-ip |nsa |near |rcv |na |2014-03-
12,12:41:17

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 431

Oscilloquartz: An ADVA Company Commands Reference

|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-

12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,11:45:52

ADMIN:upgrade--> show file-services-status

File Transfer Status : in_progress

File Transfer Percent Complete : 73
Database or Upgrade Current State : SWINSTALL

ADMIN:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 100
Database or Upgrade Current State : SWINSTALL

ADVA:upgrade--> show release-versions

Active Release Version : 7.1.1-021

Standby Release Version : 7.1.1-020

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 432

Oscilloquartz: An ADVA Company Commands Reference

installation-type
Sets the GNSS receive configuration type.

Command Level
Configure GPS-Port

Syntax
installation-type [full-sky-view | limited-sky-view]

Default. Select this option for roof-top antenna installation.

full-sky-view
cno-mask is 35, and elevation-mask is 20 degrees.
Select this option when antenna view is limited.
limited-sky-view
cno-mask is 0, and elevation-mask is 0 degrees.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> installation-type full-sky-view
ADVA-NE-1:gnss-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 433

Oscilloquartz: An ADVA Company Commands Reference

Coordinate Latitude : N32:11:32.142

Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state gnss-system-types
alias pdop-mask
delay-type pps-generation
delay-value show gps-port
elevation-mask cno-mask
sat-min1-threshold show satellite-entries
sat-min2-threshold self-survey-period

interference-squelch-control
If the GNSS port is used for time clock reference and you select this option, a detected
advanced jamming condition or advanced spoofing condition cause GNSS port failure.

Command Level
configure gps-port

Syntax
interference-squelch-control <disabled|enabled>

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5412-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> interference-squelch-control enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 434

Oscilloquartz: An ADVA Company Commands Reference

ip-address (comms)
Configure the Internet Protocol (IP) address associated with this IPv4 Interface.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
For DCN (eth0):
configure <ip-eid> ip-address <ip-address> <netmask>

IPv4 Entity Identifier.

ip-eid
Valid entry: eth0
Enter the IP Address to associate with this IP
Interface.
ip-address
Valid entry: Valid IP Address; Default - eth0:
192.168.0.2
Enter the Network Mask to associate with this IP
Interface.
netmask
Valid entry: Valid IPv4 Mask; Default is
255.255.255.255. on p. 85

For Management Tunnel:

ip-address <ip-address>

Guidelines
This command configures the IP Address associated with this IPv4 Interface.

Examples
For DCN (eth0):

ADVA--> configure communication

ADVA:comms--> configure eth0 ip-address 10.10.10.10 255.255.255.255
ADVA:comms--> show eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 435

Oscilloquartz: An ADVA Company Commands Reference

Name : eth0

IP Address : 10.10.10.10

Netmask : 255.255.255.255

DHCP Role : dhcp-server

DHCP : enabled

MTU : 1500

Layer 2 Service Name : Not Available

Physical Address : 00:80:ea:02:62:00

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> ip-address 120.120.120.10
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID :OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 436

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 437

Oscilloquartz: An ADVA Company Commands Reference

ip-address (rap)
Configures the IPv4 address for this Remote Authentication Server entry.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
ip-address <ip-address>

The IPv4 address of the Remote Authentication

ip-address Server.
Valid entry: Valid IPv4 Address. Default is 0.0.0.0.

Guidelines
This command configures the IPv4 address for this Remote Authentication Server entry.
Only IPv4 addresses are acceptable. Up to three RAP servers (1-3) may be configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> ip-address 10.10.10.10
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv4
IPv4 Address : 10.10.10.10
IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 438

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
accounting-port
control retries
ipv6-address (rap) secret
ip-version (rap) show rap-server
order timeout
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 439

Oscilloquartz: An ADVA Company Commands Reference

ip-mode
Configure the Internet Protocol (IP) versions to be supported on a Management DCN. All
attributes related to IPv6 are only displayed, when the ip-mode is set to ipv4-and-ipv6.
Otherwise, only the IPv4 attributes are displayed.

Security Level
Provisioning

Command Level
Configure Communication

Syntax
configure eth0 ip-mode <ip-mode>

The Internet Protocol (IP) versions to be supported on a

Management DCN.
ip-mode
Valid entry: ipv4-and-ipv6, ipv4-only. The default is ipv4-
only.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 ip-mode ipv4-and-ipv6
ADVA:comms--> show eth0
Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 440

Oscilloquartz: An ADVA Company Commands Reference

IPv6 RA Prefix Length : 0

IPv6 Stateless Address Auto
Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address
Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
add ndp-entry dhcpv6-control show mgmttnl
add ip-route flush-arp-cache show ping-result
add ipv6-route list mgmttnl show src-addr
add mgmttnl ping6 show trace-route-
configure src-addr show arp-entries result
delete arp-entry ip-mode trace-route
delete ip-route show ip-interface eth0 rip-ng-control
delete ipv6-route show ip-routes ipv6-unicast-addr
delete mgmttnl trace-route6 ipv6-sys-def-gateway
delete ndp-entry

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 441

Oscilloquartz: An ADVA Company Commands Reference

ip-version
Configure the IP version of a PTP Clock Probe or PTP Network Probe.

Security Level
Provisioning

Command Level
Configure PTP Clock Probe

Configure PTP Network Probe

Syntax
ip-version <ip-version>

IP version for this probe.

ip-version
Valid entry: ipv4

Guidelines
This command is used to configure IP version for a PTP Clock Probe or PTP Network Probe.
The IP version can not be edited if the probe belongs to an active schedule.

Examples
Example at the Configure PTP Clock Probe level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> ip-version ipv4
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1

Name : PtpClockProbe1
Current State : running
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : acc_ptp_flow_pt-1-1-1-1-5
IP Version : ipv4
Slave Ip Address : 10.0.0.2
Master Ip Address : 10.0.0.1
Direction : master-to-slave
Reference Eid : time_clock-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 442

Oscilloquartz: An ADVA Company Commands Reference

Expected QL : ql-none
MTIE MaskType : g8272-prtc
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -24
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |
| 10000.0s | 37 | OK | OK |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 443

Oscilloquartz: An ADVA Company Commands Reference

| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add ptp-clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result\
mtie-restart
direction
master-ip-address
expected-ql
name (ne, probe)
fpp-cluster-assured
ptp-flowpoint
fpp-cluster-satisfied
reference, reference-eid
show ptp-clock-probe
slave-ipv4-address
show syncjack-telecom-slave
show history-result

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 444

Oscilloquartz: An ADVA Company Commands Reference

ip-version (rap)
Configure the IP version of a Remote Authentication Server.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
ip-version <ip-version>

Specify the IP version.

ip-version
Valid entry: ipv4, ipv6. The default is ipv4.

Guidelines
This command is used to configure the IP version of a Remote Authentication Server.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 2
ADVA:user-sec:rem_auth_server-2--> ip-version ipv6
ADVA:user-sec:server-2--> show rap-server

RAS Status : disabled

Order : second
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 445

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
accounting-port
control retries
ip-address (rap) secret
ipv6-address (rap) show rap-server
order timeout
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 446

Oscilloquartz: An ADVA Company Commands Reference

ipv6-address (rap)
Configure the IPv6 address for this Remote Authentication Server entry.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
ipv6-address <ipv6-address>

The IPv address of the Remote Authentication

ipv6- Server.
address Valid IPv6 unicast address. The default is
0000:0000:0000:0000:0000:0000:0000:000.

Guidelines
This command configures the IPv6 address for this Remote Authentication Server entry. Up
to three RAP servers (1-3) may be configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> ipv6-address 2001:0000:85A3:0000:0000:0000:0000:000A
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : second
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 447

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
accounting-port
control retries
ip-address (rap) secret
ip-version (rap) show rap-server
order timeout
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 448

Oscilloquartz: An ADVA Company Commands Reference

ipv6-sys-def-gateway
Configure the IPv6 system default gateway IP address. This IPv6 attribute is only displayed,
when the ip-mode is set to ipv4-and-ipv6. Otherwise, only the IPv4 attributes are
displayed.

Configuration of the system default gateway creates an IPv6 static route entry that is also
manageable by accessing the IPv6 static route table. The same rules for creating a default
IPv6 static route on an interface also apply to the creation of a default gateway on an
interface.

The IPv6 static route created for the system default gateway has these values:

l Interface = eth0
l Destination = 0000:0000:0000:0000:0000:0000:0000:0000
l Prefix Length = 0
l Gateway = System Default Gateway value
l Metric = 1
l Advertise = disabled
l Type = static

Ensure to change the system default gateway when

necessary. Using an invalid address can result in losing
the connection to the NE.

Command Level
Configure Communications

Syntax
configure eth0 ipv6-sys-def-gateway <ipv6-address>

IP address of the System Default Gateway. The IPv6 Unicast address

for the IPv6 System Default Gateway. It is required if DHCP is
ipv6-address disabled.
Valid entry: Valid IPv6 address.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 ipv6-sys-def-gateway FDAA:0000:0000:0000:0000:0000:0000:0001
ADVA:comms--> show eth0
Name : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 449

Oscilloquartz: An ADVA Company Commands Reference

IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
add ip-route ip-address (comms)
add mgmttnl ip-mode
add ndp-entry list mgmttnl
buffer-size netmask
cir prefix-length
cos rip2Pkts-control
dhcp-client-id show mgmttnl
dhcp-client-id-control svlan-control
dhcp-control svlan-id
eir sys-def-gateway
dhcpv6-control vlan-id
rip-ng-control show eth0
ipv6-unicast-addr ping6
trace-route6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 450

Oscilloquartz: An ADVA Company Commands Reference

ipv6-unicast-addr
Manually configure the IPv6 Unicast address of the Management DCN.

This IPv6 attribute is only displayed, when the ip-mode is set to ipv4-and-ipv6.
Otherwise, only the IPv4 attributes are displayed.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
configure eth0 ipv6-unicast-addr <ipv6-address> <prefix-length> [<ipv6-def-gateway>]

The IPv6 address for this IP interface.

ipv6-address
Valid entry: A valid IPv6 Global Unicast address.
The prefix length of the IPv6 address.
prefix-length
Valid entry: 0-128.
The system default IPv6 gateway for the interface. This parameter is
ipv6-defgateway optional.
Valid entry: IPv6 address of the Gateway

Guidelines
This command is used to manually configure the IPv6 Unicast address of Management
DCN.

When configuring an IPv6 network and there is no need for IPv4, the IPv4 dhcp-control
should be disabled and the IPv4 ip-address (comms) set to 0.0.0.0/0.

The IPv6 address is usually automatically configured. Manual configuration is requested

only when dhcpv6-control is disabled.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 ipv6-unicast-addr FDAA:0000:0000:0000:0000:0000:0000:000A 64
ADVA:comms--> show eth0
Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 451

Oscilloquartz: An ADVA Company Commands Reference

DHCP Role : dhcp-client

DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
add ip-route ip-address (comms)
add mgmttnl ip-mode
add ndp-entry ipv6-sys-def-gateway
buffer-size list mgmttnl
cir netmask
cos prefix-length
dhcp-client-id rip2Pkts-control
dhcp-client-id-control show mgmttnl
ipv6-unicast-addr svlan-control
eir svlan-id
dhcpv6-control sys-def-gateway
rip-ng-control vlan-id
ping6 show eth0
trace-route6

jamming-squelch-control
If the GNSS port is used for time clock reference and you select this option, a detected
jamming condition causes GNSS port failure.

Command Level
configure gps-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 452

Oscilloquartz: An ADVA Company Commands Reference

Syntax
jamming-squelch-control <disabled|enabled>

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa542-1-1-1
ADVA-NE-1:nteosa5412-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> jamming-squelch-control enabled

keys-entities
Configures NTP authentication keys.

Command Level
Configure NTP Clock

Syntax
keys-entities ntp-auto-key|ntp-sym-key|ntp-sym-key-file

ntp-auto-key Activates RFC5906 Autokey for NTP server authentication.

Activates symmetric key authentication using MD5 or SHA1
ntp-sym-key
encryption.
ntp-sym-key-file Loads or activates NTP symmetric key file.

Examples
ADVA--> configure ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> configure ntp ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1-->keys-entities

Related Commands
add ntp-clock, mode, secure-mode, server-state, sym-key-authentication, time-reference-
loss-handling

leap59
Enables or disables leap59 adjustment for NMEA or CCSA TOD&PPS input formats.

Command Level
configure system time-zone

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 453

Oscilloquartz: An ADVA Company Commands Reference

Syntax
leap59 <true|false>

Examples
ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:time-zone--> leap59 true

leap61
Enables or disables leap69 adjustment for NMEA TOD&PPS input format.

Command Level
configure system time-zone

Syntax
leap59 <true|false>

Examples
ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:time-zone--> leap61 true

leap-second-date
Set the leap second date.

Command Level
configure system time-zone

Syntax
leap-second-date <date>

date The date in the format: yyyy-mm-dd

Examples
ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:time-zone--> leap-second-date 2021-12-31

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 454

Oscilloquartz: An ADVA Company Commands Reference

line-code
Allows the user to select the desired line code for a BITS port.

Security Level
Provisioning

Command Level
Configure BITS In/Out

Syntax
line-code <linecode>

The line code for either BITS In, BITS Out Or T1 Port.

linecode Valid entry: for e1: e1-ami, e1-hdb3. Default is e1-

hdb3.for t1: t1-ami, t1-b8zs. Default is t1-b8zs.for
2048hz: N/A.

Guidelines
This command allows the user to select the desired line code for a BITS port.

Whether editing the BITS In or the BITS Out, the selected line code is mirrored to the other
BITS interface, regardless of the admin-state of that interface. The line code is subservient to
the BITS Line Type, and the valid selections change accordingly. Settings should be made in
the order of: bits-line-type, line code, frame-format, sa-bit. For valid entry, see Parameter
Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-in bits_in-1-1-1-1
ADVA-NE-1:bits_in-1-1-1-1--> frame-format e1-dualframe
ADVA-NE-1:bits_in-1-1-1-1--> line-code e1-hdb3
ADVA-NE-1:bits_in-1-1-1-1--> sa-bit bit5
ADVA-NE-1:bits_in-1-1-1-1--> show bits-in

Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-dualframe

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 455

Oscilloquartz: An ADVA Company Commands Reference

SA Bit : bit5
QL Mode : disabled
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-nsupp

Related Commands
line-code
admin-state
ql-mode
alias
sa-bit
assumed-ql
show alarm-attributes
bits-line-type
show bits-in
expected-ql
show bits-out
frame-format (bits)
squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 456

Oscilloquartz: An ADVA Company Commands Reference

list
Displays a list of the existing config files.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
list

Guidelines
This command displays a list of the existing config files including the Next Reset status (see
restart-with-configfile) and description, if any (see description (config-file)).

Examples
ADVA--> admin config-file
ADVA:config-file--> list

|File Name |Description

|---------------------|--------------------------------------------------------|
|configfile1 |original_instal_db

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 457

Oscilloquartz: An ADVA Company Commands Reference

list mgmttnl
List of configured Management Tunnels.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
list mgmttnl

Guidelines
This command displays a list of the configured management tunnels including the
management tunnel EID, associated port EID and the management tunnel name.

Examples
ADVA--> configure communication
ADVA:comms--> list mgmttnl

|Management tunnel EID |Associated port EID |Management tunnel Name

|------------------------|----------------------|-----------------------|
|mgmt_tnl-1 |network-1-1-1-1 |phoenix1

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 458

Oscilloquartz: An ADVA Company Commands Reference

list syncref
Display the entries on the Sync Reference list.

Security Level
retrieve

Command Level
Configure Sync

Syntax
list syncref

Guidelines
This command is used to display the entries on the Sync Reference list.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1
ADVA-NE-1:sync-1-1-1--> list syncref
|Sync-Ref EID |Priority |Source |Status |Received QL |State
|-----------------|----------|------------------|--------------|---------------|---------
---|
|syncref-1-1-1-1 |1 |bits_in-1-1-1-1 |ref-failed |ql-inv0
|unavailable

Related Commands
add syncref
network-clock-type show sync
admin-state
priority (sync/timeclock) show sync-available-
clear
selection-mode refs
clear-lockout
show alarm-attributes show syncref
clear-wtr
list syncref sync-alias
delete syncref
lockout sync-ref-alias
e-Prtc-Mode
manual-switch wtr-time
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 459

Oscilloquartz: An ADVA Company Commands Reference

list sys-resource
List of the System Resources.

Security Level
Provisioning

Command Level
Any

Syntax
list sys-resource

Examples
At any menu level:

ADVA--> list sys-resource

|Associated EID |Description |Allocated |Available
|------------------------------|---------------|--------------------|--------------------
|
|nteosa5422-1-1-1 |flow |0 |10
|
|nteosa5422-1-1-1 |policer |0 |256
|
|nteosa5422-1-1-1 |shaper |22 |106
|
|nteosa5422-1-1-1 |traffic-queue |5140 (KB) |26200 (KB)
|
|access-1-1-1-1 |cir |10112000 (bps) |989888000 (bps)
|
|access-1-1-1-1 |eir |0 (bps) |8000000000 (bps)
|
|network-1-1-1-1 |cir |10112000 (bps) |989888000 (bps)
|
|network-1-1-1-1 |eir |0 (bps) |8000000000(bps)
|

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 460

Oscilloquartz: An ADVA Company Commands Reference

load
Runs the designated config file, changing the current running configuration.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
load <filename>

Guidelines
This command runs an existing config file. The config file modifies the current running
configuration. The contents of the config file are viewable using the show configfile
command. The config file is text-based, but is not editable on the system, but can be edited
elsewhere by using the transfer-file command to move it to a remote server, edit it then
move it back to the system.

An alternative to the load command is to schedule the config file to run following the next
system reset using the restart-with-configfile command.

This operation modifies the current running configuration. Care must be taken to ensure
that the configuration of the config file matches that of the system, or traffic may be
affected.

Examples
ADVA--> admin config-file
ADVA:config-file--> load config1
ADVA:config-file--> show configfile-status

Configuration File Action : load

Configuration File Status : success
Configuration File Error Information :

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 461

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 462

Oscilloquartz: An ADVA Company Commands Reference

locality
Setting for SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
locality <locality>

A locality (city, area, etc.) name for the SSL

locality Certificate.
Valid entry: up to 128 ASCII characters

Guidelines
This command sets the locality identifier for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> locality Richardson
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 463

Oscilloquartz: An ADVA Company Commands Reference

localpriority
Set PTP Clock local priority.

Security Level
Provisioning

Command Level
Configure PTP Clock

Configure PTP Port

Syntax
localpriority <local_priority>

local_
Priority (based on IEEE 1588v2).
priority

Guidelines
This command is used to edit a Precision Time Protocol Clock (PTP Clock) Local Priority.

Examples
Example at the Configure PTP Clock level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> localpriority 128
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-clock
Admin State : management
Operational State : normal
Secondary States : act
Alias :
PTP Profile : g8275-1
Clock Type : master-only
Oper Mode : t-gm
Clock Identity : 0080ea39d1500001
PTP Domain Number : 24
Time Source : time_clock-1-1-1-1
Priority 1 : 128
Priority 2 : 128
Local Priority : 128
Clock Class : 160
Clock Accuracy : 33

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 464

Oscilloquartz: An ADVA Company Commands Reference

Scaled Log Variance : 20061

Sync Id : none
Current Time Of Day : Not Available
Active Slave Port : none
Clock Recovery State : na
Phase Recovery State : na
Time Traceability Status : disabled
Time Since Time Traceability Changed : 1
Freq Traceability Status : disabled
Time Since Freq Traceability Changed : 0
Sync Reference Mode : disabled
QL Mode : disabled
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-eec1
Received QL :

Example at the Configure PTP Port level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> localpriority 128
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port

Admin State : management

Operational State : normal
Secondary States : act
Alias :
Master Clock Type : one-step
Not Slave : Enabled
Peer Port Identity :
Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Peer Clock Class : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 465

Oscilloquartz: An ADVA Company Commands Reference

Peer MacAddress : 00:80:ea:39:d1:51

Last Announce Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
0102002C180000000000000000000000000000000080EA05001000010000319D017F0000000C2606342F4D00
Port Identity : 0080ea39d15000010001

Related Commands
add ptp-clock expected-ql
add ptp-port min-exp-clk-cls
admin-state priority1
alias priority2
assumed-ql show ptp-clock
delete ptp-clock show ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 466

Oscilloquartz: An ADVA Company Commands Reference

location
Edit the location information for this Network Element.

Security Level
Provisioning

Command Level
Network Element

Syntax
location <ne-location>

A character string (0 to 256 characters) representing

the Location for the Network Element.
ne-location Valid entry: Character string - 0 to 256 characters; an
empty string or string containing spaces must be
enclosed in quotation marks. Default is null.

Guidelines
This command supports editing the location info for this Network Element. For valid entry,
see Parameter Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> location Row_12_Rack_9_Shelf_3
ADVA-NE-1--> show network-element ne-1
NE Type : shelf-nteosa5422
NE Name : OSA 5422
NE Location : Row_12_Rack_9_Shelf_3
NE Contact : John_Smith
NE Description : OSA 5422
Accepted Status : enabled
NE CLI Prefix : NE-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 467

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show alarm-attributes
autoprov-mode show ne-alarms
contact show ne-conditions
name (ne, probe) show network-element
opr-lamptest show shelf-info
prompt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 468

Oscilloquartz: An ADVA Company Commands Reference

lockout
This operation initiates a Lockout request.

There are three types of switches that can be performed:

l lockout
l forced
l manual

Security Level
maintenance

Command Level
Configure Sync

Configure Time Clock

Syntax
lockout [<syncref-eid> | <timeref-eid>]

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
MANUAL switch requests are lower in the protection switching hierarchy than automatic
switches while FORCED and LOCKOUT are higher - which means that a LOCKOUT or
FORCED switch request will override a reference failure.

This command initiates a Forced Switch request. For valid entity identifiers, see Equipment /
Entity IDs .

Examples
Example at the Configure Sync level:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 469

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

ADVA-NE-1:sync-1-1-1-1--> lockout syncref-1-1-1-1-2

ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : network-1-1-1-1
Clock Mode : locked
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

Example at the Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> lockout timeref-1-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : lockout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 470

Oscilloquartz: An ADVA Company Commands Reference

User Request Target : timeref-1-1-1-1-1

Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 471

Oscilloquartz: An ADVA Company Commands Reference

log-anonyme-interval
Set the logging anonymization interval.

Security Level
Superuser

Command Level
Configure User Security

Syntax
log-anonyme-interval <interval>

The logging anonymization interval in days. After the

configured number of days have passed, the system
anonymizes the user names. At midnight of that day,
the system anonymizes all the log entries that
precede the configured value. 0 means NEVER
interval
anonymize.
Valid entry: 0 to 1096
The default value is 0, where the user names are
never anonymized.

Guidelines
This command sets when the system implements data anonymization, which adheres to
these guidelines:

l If the logging anonymization interval is set to NEVER, the user names are never
anonymized. This is the default setting.
l For all other values from 1 to 1,096 days, after the configured number of days have
passed, the system anonymizes the user names. At midnight of that day, the
system anonymizes all the log entries that precede the configured value.

Examples
To configure the logging anonymization interval:

ADVA--> configure user-security

ADVA:user-sec--> log-anonyme-interval 90
ADVA:user-sec--> show security-system
Authentication Protocol : none
Access Order : local

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 472

Oscilloquartz: An ADVA Company Commands Reference

Authentication Type : pap

NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 90
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : all
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level log-anonyme-interval
delete <user-id> tacacs-privilege-control
nas-ip-address tacacs-user-privilege
nas-ipv6-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 473

Oscilloquartz: An ADVA Company Commands Reference

log2file-control
Enable or disable the logging of System Alarm Logs or System Audit logs to a local,
persistent file.

Security Level
Provisioning

Command Level
Alarm Log

Audit Log

Syntax
log2file-control <control>

Enable or Disable logging Alarm logs or Audit logs

control to a local file.
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable the logging of Alarm events or Audit logs to a
local file on the System.

Examples
To set System Alarm Logs:

ADVA--> configure system

ADVA:system--> alarm-log
ADVA:system:alarm-log--> log2file-control enable
ADVA:system:alarm-log--> show alm-log-config

Syslog Storage : disabled

Log to File : enabled

To set System Audit logs:

ADVA--> configure system

ADVA:system--> audit-log
ADVA:system:audit-log--> log2file-control enable
ADVA:system:audit-log--> show audit-log-config

Syslog Storage : disabled

Log to File : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 474

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 475

Oscilloquartz: An ADVA Company Commands Reference

lpbk-timer
Set the timer value that will be used when performing a Timed loopback operation.

Command Level
LPBK

Syntax
lpbk-timer <timer>

Activate the loopback for the number of seconds entered.

timer Valid values: Integer, in seconds (0 is invalid); Default is 10 if the
Loopback Type is a timed loopback.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> lpbk
ADVA-NE-1:access-1-1-1-1:lpbk--> lpbk-timer 10
ADVA-NE-1:access-1-1-1-1:lpbk--> show lpbk-params

Loopback VLAN 1 : 4094-0

Loopback VLAN 1 - Enabled : disabled
Loopback VLAN 2 : 4094-1
Loopback VLAN 2 - Enabled : disabled
Loopback VLAN 3 : 4094-2
Loopback VLAN 3 - Enabled : disabled
Loopback Type : facport
Loopback Status : none
Loopback Timer : 10
Swap SADA : sada

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 476

Oscilloquartz: An ADVA Company Commands Reference

manual-switch
This SYNC operation initiates a Manual Switch request.

There are three types of switches that can be performed:

• lockout

• forced

• manual

Security Level
maintenance

Command Level
Configure Sync

Syntax
lockout <syncref-eid>

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1

Guidelines
MANUAL switch requests are lower in the protection switching hierarchy than automatic
switches while FORCED and LOCKOUT are higher - which means that a LOCKOUT or
FORCED switch request will override a reference failure.

This command initiates a Forced Switch request. For valid entity identifiers, see Equipment /
Entity IDs .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 477

Oscilloquartz: An ADVA Company Commands Reference

Network Clock Type : option1-sdh

WTR Time : 5
Selection Mode : prio-mode
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

ADVA-NE-1:sync-1-1-1-1--> manual-switch syncref-1-1-1-1-2

ADVA-NE-1:sync-1-1-1-1--> show sync
Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : network-1-1-1-1
Clock Mode : locked
Sync QL : ql-eec1
User Request Action : manual switch
User Request Target : syncref-1-1-1-1-2

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 478

Oscilloquartz: An ADVA Company Commands Reference

master-announce-rcpt-timeout
Configure the Master Announce Receipt Timeout of the Slave Only Ordinary Clock (SOOC).

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
master-announce-rcpt-timeout <timeout>

Master Announce Message Receipt Timeout in

ms-timeout seconds
Valid entry: 2-255 (seconds)

Guidelines
This command is used to configure the Master Announce Receiving Timeout of the Slave
Only Ordinary Clock SOOC.

Example
Refer to this example:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> master-announce-rcpt-timeout 2
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave Address : 100.100.10.0
Slave Subnet Mask : 255.255.255.255
Interface name : doctest
Current Offset From Master : 0
Current History 15 min. Index : 2147483647
Master Clock Type : one-step
Unicast Message negotiation : disabled
Master Delay Mechanism : end-to-end

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 479

Oscilloquartz: An ADVA Company Commands Reference

Master Priority : 0
Master IP Version : ipv4
Master IPv4 Address : 100.100.10.1
Master Announce Message Rate : 1-pkt-per-sec
Master Announce Receipt Timeout : 2
Master Delay Response Message Rate : 1-pkt-per-sec
Master Delay Response Receipt Timeout : 128
Master Sync Message Rate : 1-pkt-per-sec
Master Sync Receipt Timeout : 10
Master Lease Duration : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1

Related Commands
add ocs-port priority-mode-value
admin-state
alias show last-rcv-delay-rsp-msg
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show ocs-port
show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 480

Oscilloquartz: An ADVA Company Commands Reference

master-ip-address
Configure the master IPv4 Address.

Security Level
Provisioning

Command Level
Configure PTP Clock Probe

Configure PTP Network Probe

Syntax
master-ip-address <ipv4-addr>

The IPv4 Address of the Master Clock associated

ipv4-addr with a Syncjack probe.
Valid entry: a valid IPv4 address.

Guidelines
This command is used to configure the master IPv4 address of the Syncjack Probe.

Examples
Example at the PTP Clock Probe level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> master-ip-address 123.123.123.1
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1

Name : PtpClockProbe1
Current State : running
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : acc_ptp_flow_pt-1-1-1-1-5
IP Version : ipv4
Slave Ip Address : 10.0.0.2
Master Ip Address : 123.123.123.1
Direction : master-to-slave
Reference Eid : time_clock-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 481

Oscilloquartz: An ADVA Company Commands Reference

Expected QL : ql-none
MTIE MaskType : g8272-prtc
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -24
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |
| 10000.0s | 37 | OK | OK |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 482

Oscilloquartz: An ADVA Company Commands Reference

| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add ptp-clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result
mtie-restart
show ptp-clock-probe
master-ip-address
show syncjack-telecom-slave
name (ne, probe)
show history-result
ptp-flowpoint
direction
reference, reference-eid
expected-ql
slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 483

Oscilloquartz: An ADVA Company Commands Reference

master-priority
Configure the Master priority.

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
master-priority <priority>

The master priority.

priority
Valid entry: 0-255

Guidelines
This command is used to configure the Master priority.

Examples
Refer to this example:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> master-priority 0
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave Address : 100.100.10.0
Slave Subnet Mask : 255.255.255.255
Interface name : doctest
Current Offset From Master : 0
Current History 15 min. Index : 0
Master Clock Type : one-step
Unicast Message negotiation : disabled
Master Delay Mechanism : end-to-end
Master Priority : 0
Master IP Version : ipv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 484

Oscilloquartz: An ADVA Company Commands Reference

Master IPv4 Address : 100.100.10.1

Master Announce Message Rate : 1-pkt-per-sec
Master Announce Receipt Timeout : 2
Master Delay Response Message Rate : 1-pkt-per-sec
Master Delay Response Receipt Timeout : 128
Master Sync Message Rate : 1-pkt-per-sec
Master Sync Receipt Timeout : 10
Master Lease Duration : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1

Related Commands
add ocs-port priority-mode-value
admin-state
alias show last-rcv-delay-rsp-msg
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show ocs-port
show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 485

Oscilloquartz: An ADVA Company Commands Reference

master-syncrcp-timeout
Configure the Master synchronization receipt timeout.

Security Level
Provisioning

Command Level
Configure SOOC

master-syncrcp-timeout <timeout>

Syntax

Master synchronization receipt timeout

timeout
Valid entry: 2-255 (seconds).

Guidelines
This command is used to configure the Master synchronization receipt timeout.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> master-syncrcp-timeout 10
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave IPv4 Address : 110.110.10.10
Slave Subnet Mask : 255.255.255.0
Slave IPv6 Address : Not Available
Slave Prefix : Not Available
Interface name : sooc1
Current Offset From Master, (ns) : 0
Current History 15 min. Index : 0
Master Clock Type :
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end
Master Priority : 128
Master IP Version : ipv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 486

Oscilloquartz: An ADVA Company Commands Reference

Master IPv4 Address : 110.110.110.10

Master IPv6 Address : Not Available
Master Announce Message Rate : 1-pkt-per-16-sec
Master Announce Receipt Timeout, (intervals) : 2
Master Delay Response Message Rate : 32-pkt-per-sec
Master Delay Response Receipt Timeout,
(intervals) : 255
Master Sync Message Rate : 32-pkt-per-sec
Master Sync Receipt Timeout, (intervals) : 10
Master Lease Duration, (s) : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1
Expected Clock Class : 247
E2E Asymmetry Delay Comp Mode : automatic
E2E Asymmetry Delay Comp Status : operational
E2E Asymmetry Delay Comp Value, (ns) : -50
Lockout Control : disabled
Protection State : active
WTR : false
Clock Recovery State : normal
Phase Recovery State : normal

Related Commands
add ocs-port priority-mode-value
admin-state show last-rcv-delay-rsp-msg
alias show last-rcv-sync-msg
delete ocs-port show ocs-port
master-announce-rcpt-timeout show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 487

Oscilloquartz: An ADVA Company Commands Reference

max-te-clear-threshold
This command configures the Maximum Time Error Alarm Clear threshold for this Clock Probe
or PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
max-te-clear-threshold <max-te-clear-threshold>

max-te- Maximum Time Error Alarm Clear threshold.

clear-
threshold Valid entry: 0-100000000; default is 0

Guidelines
Maximum Time Error Clear Threshold (in ns). This option is only applicable if Measurement
Type is set to Phase. If the measurement meets this threshold (+ or - direction in respect to
0 on the phase TE graph) will clear an existing SJ Max TE Threshold Exceeded alarm.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock_probe-1-1--> max-te-clear-threshold 0
ADVA-NE-1:syncjack:clock_probe-1-1--> show clock-probe

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 488

Oscilloquartz: An ADVA Company Commands Reference

Source Type : phase

Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 489

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-window
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 490

Oscilloquartz: An ADVA Company Commands Reference

max-te-threshold
This command configures the Maximum Time Error Alarm Threshold for this Clock Probe or
PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
max-te-threshold <max-te-threshold>

max-te- Maximum Time Error Alarm Threshold.

threshold Valid entry: 0-100000000; default is 0

Guidelines
Maximum Time Error Threshold (in ns). This option is only applicable if Measurement Type
is set to Phase. If measurement exceeds this threshold (+ or - direction in respect to 0 on
the phase TE graph) then this will create an SJ Max TE Threshold Exceeded alarm. Max TE
threshold must be at least 50 ns greater than the clear threshold. Setting both Max TE
Threshold and Max TE Clear Threshold to 0 will disable this TCA.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> max-te-threshold 0
ADVA-NE-1:syncjack:clock_probe-1-2-> show clock-probe

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 491

Oscilloquartz: An ADVA Company Commands Reference

(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 492

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-windowdelete clock-
mtie-mask-type
probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 493

Oscilloquartz: An ADVA Company Commands Reference

mdix
Configure the Medium-Dependent Interface Crossover (MDIX) control for this port.

Security Level
Provisioning

Command Level
Configure Access Port

Configure DCN

Syntax
mdix <mdix>

Set the MDIX control for an Ethernet Access port.

mdix
Valid entry: auto, crossed, uncrossed

Guidelines
Set the MDIX control for an Ethernet Access port. For valid entry, see Parameter Rules /
Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure dcn dcn-1-1-1-1
ADVA-NE-1:dcn-1-1-1-1--> mdix auto
ADVA-NE-1:dcn-1-1-1-1--> show dcn
Admin State : in-service
Operational State : normal
Secondary States : act
Alias :
MAC Address : 00:80:ea:2f:c0:70
MTU (bytes) : 1500
Media Type : copper
Max Port Speed : 100000000
Configured Port Speed : auto
Negotiated Port Speed : auto-100-full
MDIX Control : auto
MDIX Status : uncrossed

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 494

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show access-port
alias show alarm-attributes
media show dcn
mdix show sfp-info
port-shaping speed

measurements-points
Configures the expected MTIE results for custom MTIE mask. Calculate the results according
to the definition in the standard.

Command Level
Configure User MTIE Mask

Syntax
measurements-point <string>

19 results in nanoseconds rounded to the nearest integer. Each

result corresponds to a threshold interval. Each result must be
string equal or greater then the previous.
Maximum 256 characters.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure user-mtie-mask
ADVA-NE-1:syncjack:user-mtie-mask--> configure user-mtie-mask user_mtie_mask-1-1
ADVA-NE-1:syncjack:user_mtie_mask-1-1--> measurement-points
4600,9000,9000,9000,9000,9000,9000,9000,14000,18000,18000,18000,18000,NA,NA,NA,NA,NA,NA

Related Commands
mtie-mask-name, x-y-display-points, show user-mtie-mask

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 495

Oscilloquartz: An ADVA Company Commands Reference

measurement-type
This command configures the Measurement Type (Frequency or Phase) for this Clock Probe
or PTP Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
measurement-type <measurement-type>

measurement- Measurement Type.

type Valid entry: frequency, phase; default is frequency

Guidelines
Maximum Time Error Threshold (in ns). This option is only applicable if Measurement Type
is set to Phase. If measurement exceeds this threshold (+ or - direction in respect to 0 on
the phase TE graph) then this will create an SJ Max TE Threshold Exceeded alarm. Max TE
threshold must be at least 50 ns greater than the clear threshold. Setting both Max TE
Threshold and Max TE Clear Threshold to 0 will disable this TCA.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> measurement-type phase
ADVA-NE-1:syncjack:clock_probe-1-2--> show clock-probe

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 496

Oscilloquartz: An ADVA Company Commands Reference

(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 497

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
max-te-clear-threshold
add clock-probe
max-te-threshold
const-te-clear-threshold
measurement-type
const-te-threshold
mtie-mask-margin
const-te-windowdelete clock-
mtie-mask-type
probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 498

Oscilloquartz: An ADVA Company Commands Reference

media
Set the media type for an access port.

Command Level
Configure Access Port

Syntax
media <type>

Set the media type.

type
Valid values: copper-sfp, fiber

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> media fiber
ADVA-NE-1:access-1-1-1-1--> show access-port

Admin State : maintenance

Operational State : outage
Secondary States : act,maint,faf
Alias :
Physical Entity Address : 00:80:ea:02:63:00
MTU : 9600
Link Status Trap Enable : enabled
Max Port Speed : 0
Configured Port Speed : auto
Negotiated Port Speed : negotiating
Media Type : fiber

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 499

Oscilloquartz: An ADVA Company Commands Reference

mgmt-traffic-bridge
Enable or Disable a Management Traffic Bridging connection.

Security Level
Provisioning

Command Level
Configure System

Syntax
mgmt-traffic-bridge [disabled|enabled]

Guidelines
This command implements an Ethernet Bridge between the Management LAN (eth0) and all
configured Management Tunnels. This allows having only a single IP address for all
management interfaces on the system and eliminates the need for static routes, routing
protocols or proxy ARP in an Subtending Network Element (SNE)/Gateway NE (GNE)
configuration. The Ethernet Bridge functionality supports MAC learning and flooding of un-
learned MAC addresses. If Management Traffic Bridging is Enabled (see “System
Configuration Settings�? on p.447), management tunnels do not support provisioning for
IP Address, Subnet Mask, DHCP or RIP. Another system level option, Management Traffic
Bridging Security, limits acceptance of DCN packets to those with source MACs containing
an ADVA OUI. Management Traffic Bridging also facilitates the use of a Hot Sparing
configuration.

Examples
Refer to this example:

ADVA--> configure system

ADVA:system--> mgmt-traffic-bridge disabled
ADVA:system--> show system
System Name : OSA 5422
System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 500

Oscilloquartz: An ADVA Company Commands Reference

NTP Mode : ntp-client

CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 501

Oscilloquartz: An ADVA Company Commands Reference

mgmt-traffic-bridge-security
Enable or Disable Management Traffic Bridging Security on a Management Traffic Bridge.

Command Level
Configure System

Syntax
mgmt-traffic-bridge-security [disabled|enabled]

Guidelines
This command implements security on a Management Traffic Bridge (see mgmt-traffic-
bridge). Management Traffic Bridge (mgmt-traffic-bridge) must be enabled prior to
enabling security. Also, there is proprietary authentication that must complete prior to the
system accepting packets on the DCN (eth0) port.

Examples
Refer to this example:

ADVA--> configure system

ADVA:system--> mgmt-traffic-bridge-security disabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
...

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 502

Oscilloquartz: An ADVA Company Commands Reference

min-exp-clk-cls
Configure the Minimum Expected Clock Class, which sets the minimum threshold for
receiving packets.

Security Level
Provisioning

Command Level
Configure PTP Port

Configure Telecom Slave

Syntax
min-exp-clk-cls <min-threshold>

min- Minimum Expected Clock Class.

threshold Valid entry: 0-255. The default is 247.

Guidelines
Note: This setting is only applicable for a dynamic or slave port that is related to a PTP
clock, either a boundary clock or slave clock. Otherwise, this setting is not available to
configure.

This command sets the minimum threshold for receiving packets. If the received clock class
is equal or greater than the expected clock class value, the packets for the grandmaster or
boundary clock that are sending this clock class are dropped. In addition, an alarm called
clock-class-mismatch is generated.

Examples:
This example shows how to configure the minimum expected clock class at the Configure
PTP Port level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> min-exp-clk-cls 250
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port

Admin State : management

Operational State : outage

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 503

Oscilloquartz: An ADVA Company Commands Reference

Secondary States : act,sgeo

Alias :
Master Clock Type : one-step
Master Only : Enabled
Peer Port Identity: Not Available
Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 250
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 248
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received : 00000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000
Last Sync Message Received : 00000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000
Last Delay_Resp Message Received : 00000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000
Last Delay-Req Message Received : 0102002C180000000000000000000000000000000
080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

This example shows how to configure the minimum expected clock class at the Configure
Telecom Slave level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> min-exp-clk-cls 250
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc

Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 504

Oscilloquartz: An ADVA Company Commands Reference

Slave IPv4 Address : Not Available

Slave Subnet Mask : Not Available
Slave IPv6 Address : 2000:0000:0000:0000:0000:0000:0000:000A
Slave Prefix : 64
Interface name : sooc1
Current Offset From Master, (ns) : 0
Current History 15 min. Index : 0
Master Clock Type :
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end
Master Priority : 128
Master IP Version : ipv6
Master IPv4 Address : Not Available
Master IPv6 Address : 2000:1000:0000:0000:0000:0000:0000:000A
Master Announce Message Rate : 1-pkt-per-16-sec
Master Announce Receipt Timeout,
(intervals) : 2
Master Delay Response Message Rate : 32-pkt-per-sec
Master Delay Response Receipt
Timeout, (intervals) : 128
Master Sync Message Rate : 32-pkt-per-sec
Master Sync Receipt Timeout,
(intervals) : 10
Master Lease Duration, (s) : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1
Expected Clock Class : 250
E2E Asymmetry Delay Comp Mode : disabled
E2E Asymmetry Delay Comp Status :
E2E Asymmetry Delay Comp
Value, (ns) : 0
Lockout Control : disabled
Protection State :
WTR : false
Clock Recovery State :
Phase Recovery State :

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 505

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ptp-port
delete ptp-port
add sooc
localpriority
admin-state
show ptp-clock
alias
show ptp-port
announce-receipt-timeout
sync-receipt-timeout
delay-response-timeout

mode
Sets the NTP clock mode.

Command Level
Configure NTP Clock

Syntax
mode ntp-server|ntp-peering

ntp-server The NTP clock receives time from the time reference.
ntp-peering The NTP clock receives time from another server.

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> config ntp-clock ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1--> mode ntp-server

Related Commands
add ntp-clock

mtie-mask-name
Configures a name for custom MTIE mask.

Command Level
Configure User MTIE Mask

Syntax
mtie-mask-name <string>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 506

Oscilloquartz: An ADVA Company Commands Reference

The name of the custom MTIE mask.

string
Maximum 15 characters.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure user-mtie-mask
ADVA-NE-1:syncjack:user-mtie-mask--> configure user-mtie-mask user_mtie_mask-1-1
ADVA-NE-1:syncjack:user_mtie_mask-1-1--> mtie-mask-name UserDefinedMTIE

Related Commands
measurements-points, x-y-display-points, show user-mtie-mask

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 507

Oscilloquartz: An ADVA Company Commands Reference

mtie-mask-margin
Configure the MTIE mask margin of a Syncjack Clock Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Configure PTP Clock Probe

Syntax
mtie-mask-margin <margin>

Margin.
margin
Valid entry: 0 to 99

Guidelines
This command is used to configure MTIE mask margin for a Syncjack probe. The MTIE mask
margin can not be edited if the clock probe belongs to an active schedule.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> mtie-mask-margin 40
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 508

Oscilloquartz: An ADVA Company Commands Reference

(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 40
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 509

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add clock-probe ip-version
add ptp-clock-probe master-ip-address
delete clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show clock-probe name (ne, probe)
show ptp-clock-probe ptp-flowpoint
show syncjack-telecom-slave reference, reference-eid
show history-result slave-ipv4-address
direction source-eid
expected-ql source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 510

Oscilloquartz: An ADVA Company Commands Reference

mtie-mask-type
Configure the MTIE mask type of a Syncjack probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Configure PTP Clock Probe

Syntax
mtie-mask-type <mask-type>

Mask type for probe.

Valid entry: g823-e1-sec, g823-e1-ssu, g823-e1-traffic, g823-pdh,
g824-t1-sync, g824-t1-traffic,g8261-1, g8261-e1-case1, g8261-e1-
mask-type case2, g8261-eec-opt1, g8261-t1-case1, g8262-eec-opt1, g8262-
eec-opt1-temp, g8262-eec-opt1-tolerance, g8262-eec-opt2,
g8263, g8263-const-temp, g8263-var-temp, g8272-prtc, user-
defined.

Guidelines
This command is used to configure MTIE mask type for a Syncjack probe. The MTIE mask
type cannot be edited if the clock probe belongs to an active schedule.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> mtie-mask-type g823-e1-ssu
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 511

Oscilloquartz: An ADVA Company Commands Reference

Source Eid : time_clock-1-1-1-1

Source Type : phase
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-e1-ssu
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 512

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add clock-probe
add ptp-clock-probe ip-version
delete clock-probe master-ip-address
delete ptp-clock-probe mtie-mask-margin
delete history-result mtie-restart
show clock-probe name (ne, probe)
show ptp-clock-probe ptp-flowpoint
show syncjack-telecom-slave reference, reference-eid
show history-result slave-ipv4-address
direction source-eid
expected-ql source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 513

Oscilloquartz: An ADVA Company Commands Reference

mtie-restart
Enable or Disable the Clock Probe MTIE Reset Control.

Security Level
Provisioning

Command Level
Configure Clock Probe

Configure PTP Clock Probe

Syntax
mtie-restart [disabled|enabled]

Guidelines
This command defines whether the MTIE measurement is restarted every 24 hours at
00:00:00 according to the system time. This ensures that the measurement is updated with
the most recent values. The default is Disabled. The MTIE Reset Control cannot be edited if
the clock probe belongs to an active schedule.

When restarted, the values of the Mask Failure, Mask Crossed Time, Mask Margin Failure,
and Mask Margin Crossed Time are reinitiated and start from a new time period.

Note: If this setting is disabled, the MTIE measurement is calculated over the entire period
from when the clock probe is activated. Therefore, the MTIE graph can include
measurements that are not relevant as they are dated.

Examples
Example at the Configure Syncjack command level for a clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> mtie-restart enabled
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 514

Oscilloquartz: An ADVA Company Commands Reference

MTIE Mask Margin Failed : no

Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 515

Oscilloquartz: An ADVA Company Commands Reference

| 20000.0s | N/A | N/A | N/A |

| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Example at the Configure Syncjack command level for a PTP clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> mtie-restart enabled
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> back
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1

Name : PtpClockProbe1
Current State : running
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : acc_ptp_flow_pt-1-1-1-1-5
IP Version : ipv4
Slave Ip Address : 10.0.0.2
Master Ip Address : 10.0.0.1
Direction : master-to-slave
Reference Eid : time_clock-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g8272-prtc
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -24
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 516

Oscilloquartz: An ADVA Company Commands Reference

Const TE Window, (s) : 1000

Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |
| 10000.0s | 37 | OK | OK |
| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add clock-probe
ip-version
add ptp-clock-probe
master-ip-address
delete clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result
name (ne, probe)
show clock-probe
ptp-flowpoint
show ptp-clock-probe
reference, reference-eid
show syncjack-telecom-slave
slave-ipv4-address
show history-result
source-eid
direction
source-type
expected-ql

mtu
Sets the MTU size for an access port.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 517

Oscilloquartz: An ADVA Company Commands Reference

Command Level
Configure Access Port

Syntax
mtu <mtu>

Set the MTU size in bytes.

mtu
Valid values: 1518 to 9600. The default is 9600.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure xge-4s-p xge_4s_p-1-1-3
ADVA-NE-1:xge_4s_p-1-1-3--> configure access-port lc_access-1-1-3-1
ADVA-NE-1:lc_access-1-1-3-1-->
ADVA-NE-1:lc_access-1-1-3-1--> mtu 9600

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 518

Oscilloquartz: An ADVA Company Commands Reference

name (ne, probe)

Edit the name of the Network Element or a Syncjack probe.

Security Level
Provisioning

Command Level
Network Element

Configure Clock Probe

Configure PTP Clock Probe

Syntax
name [<ne-name> or <probe-name>]

A character string (0 to 256 characters) representing

the Name of the Network Element.
ne-name Valid entry: Character string - 0 to 256 characters; an
empty string or string containing spaces must be
enclosed in quotation marks. Default is OSA 5422.
A character string (0 to 15 characters) representing
the Name of the probe.
probe-name
Valid entry: Character string - 0 to 15 characters, no
spaces; or an empty string.

Guidelines
This command is used modify the Network Element Name attribute. For valid entry, see
Parameter Rules / Valid entries.

Examples
Example at the Network Element command level:

ADVA--> network-element ne-1

ADVA-NE-1--> name OSA 5422
ADVA-NE-1--> show network-element ne-1
NE Type : shelf-nteosa5422
NE Name : OSA 5422
NE Location : Row_12_Rack_9_Shelf_3
NE Contact : John_Smith
NE Description : OSA 5422

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 519

Oscilloquartz: An ADVA Company Commands Reference

Accepted Status : enabled

NE CLI Prefix : NE-1

Related Commands
admin-state show alarm-attributes
autoprov-mode show ne-alarms
contact show ne-conditions
location show network-element
opr-lamptest show shelf-info
prompt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 520

Oscilloquartz: An ADVA Company Commands Reference

name (user)
Set name for SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
name <name>

A name to associate with the SSL Certificate.

name
Valid entry: up to 64 ASCII characters

Guidelines
This command sets the name for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> name ADVA
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 521

Oscilloquartz: An ADVA Company Commands Reference

nas-ip-address
Set the IPv4 address of the Network Access Server when the Remote Authentication
Protocol is set to radius.

Security Level
superuser

Command Level
Configure User Security

Syntax
nas-ip-address <ip-address>

Network Access Server's IPv4 address when the

ip-address Remote Authentication Protocol is set to radius.
Valid entry: Valid IPv4 address.

Guidelines
Set the Network Access Server's IPv4 address when the Remote Authentication Protocol is
set to radius. The IP Address must be a valid IPv4 address in the form: a.b.c.d This value can
be configured even when the Remote Authentication Protocol is set to none. Yet, this value
will have no effect in this case.

Examples
ADVA--> configure user-security
ADVA:user-sec--> nas-ip-address 10.10.10.10
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 10.10.10.10
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 522

Oscilloquartz: An ADVA Company Commands Reference

TACACS Default Privilege Level : provisioning

. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ipv6-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 523

Oscilloquartz: An ADVA Company Commands Reference

nas-ipv6-address
Set the IPv6 address of the Network Access Server when the Remote Authentication
Protocol is set to radius.

Security Level
superuser

Command Level
Configure User Security

Syntax
nas-ipv6-address <ipv6-address>

Network Access Server's IPv6 address when the

ipv6-address Remote Authentication Protocol is set to radius.
Valid entry: Valid IPv6 unicast address.

Guidelines
Set the Network Access Server's IPv6 Address when the Remote Authentication Protocol is
set to radius. The IP address must be a valid IPv6 address. This value can be configured
even when the Remote Authentication Protocol is set to none. Yet, the value will have no
effect in this case.

Examples
ADVA--> configure user-security
ADVA:user-sec--> nas-ipv6-address DDDD:0000:0000:0000:0000:0000:0000:000A
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 524

Oscilloquartz: An ADVA Company Commands Reference

TACACS Default Privilege Level : provisioning

. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 525

Oscilloquartz: An ADVA Company Commands Reference

netmask
Configure the Network Mask associated with this IPv4 Interface.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
For DCN (eth0):
configure <ip-eid> netmask <mask>

IPv4 Entity Identifier.

ip-eid
Valid entry: eth0
Enter the Network Mask to associate with this IP
Interface.
mask
Valid entry: Valid IPv4 Mask; Default is
255.255.255.255.

For Management Tunnel:

netmask <mask>

Guidelines
This command configures the Network Mask associated with this IPv4 Interface. If the
Management LAN Interface (eth0) is configured as a DHCP Server (dhcp-role = dhcp-
server), the Netmask last value establishes the range of IP addresses managed by the
interface. The addresses from the IP Address of the interface lower than that address to the
limit set by the netmask value are the IP addresses managed by eth0.

Examples
For DCN (eth0)

ADVA--> configure communication

ADVA:comms--> configure eth0 netmask 255.255.255.255
ADVA:comms--> show eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 526

Oscilloquartz: An ADVA Company Commands Reference

Name : eth0

IP Address : 10.10.10.10

Netmask : 255.255.255.255

DHCP Role : dhcp-server

DHCP : enabled

MTU : 1500

Layer 2 Service Name : Not Available

Physical Address : 00:80:ea:02:62:00

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> netmask 255.255.255.0
ADVA:comms:mgmt_tnl-1--> show mgmttnl

IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 527

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 528

Oscilloquartz: An ADVA Company Commands Reference

network-clock-type
Select the network clock type. If the network clock type is changed, port QL values
automatically reset to defaults. Expected QL and Squelch QL are set to none. If changing
from option2-sonet to option1-sdh, Assumed QL defaults to QL-EEC1, if changing from
option1-sdh to option2-sonet, Assumed QL defaults to QL-STU. For valid entry, see
"Parameter Rules / Valid entries ".

Command Level
Configure Sync

Syntax
network-clock-type <clock_type>

Select the Network Clock Type. Choices are: option1-sdh or

clock_type
option2-sonet. Default is option1-sdh.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1--> network-clock-type option1-sdh
ADVA-NE-1:sync-1-1-1--> show sync
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
Revertive : disabled
Revert Time (mins) : 5
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1

Related Commands
add syncref
list syncref show sync
admin-state
lockout show sync-available-
clear
manual-switch refs
clear-lockout
network-clock-type show syncref
clear-wtr
priority (sync/timeclock) sync-alias
delete syncref
selection-mode sync-ref-alias
e-Prtc-Mode
show alarm-attributes wtr-time
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 529

Oscilloquartz: An ADVA Company Commands Reference

opr-lamptest
This is to operate a lamp test on a specified shelf.

Security Level
retrieve

Command Level
Network Element

Syntax
opr-lamptest

Guidelines
The user must observe this operation to verify the lamp test was successful.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> opr-lamptest
ADVA-NE-1-->

Related Commands
admin-state show alarm-attributes
autoprov-mode show ne-alarms
contact show ne-conditions
location show network-element
name (ne, probe) show shelf-info
prompt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 530

Oscilloquartz: An ADVA Company Commands Reference

opr-lpbk
Initiate a loopback on the Port. To release a loopback, use the rls-lpbk command.

Security Level
maintenance

Command Level
Loopback

Syntax
opr-lpbk <type>

The Type of Loopback to perform.

type Valid entry: facport, factimed, facvlan, termport,
termtimed, termvlan

Guidelines
This operation initiates a loopback on the Port. Set up the desired loopback configuration
by using the lpbk-timer command, as required.

Prior to starting a test, the port must be placed in the Maintenance state.

To release a loopback, use the rls-lpbk command.

For valid entry, see Parameter Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> admin-state maintenance
ADVA-NE-1:access-1-1-1-1--> lpbk
ADVA-NE-1:access-1-1-1-1:lpbk--> opr-lpbk facport
ADVA-NE-1:access-1-1-1-1:lpbk--> show lpbk-params
Loopback VLAN 1 : 4094-0
Loopback VLAN 1 - Enabled : disabled
Loopback VLAN 2 : 4094-1
Loopback VLAN 2 - Enabled : disabled
Loopback VLAN 3 : 4094-2
Loopback VLAN 3 - Enabled : disabled
Loopback Type : facport
Loopback Status : none
Loopback Timer : 10
Swap SADA : sada

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 531

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 532

Oscilloquartz: An ADVA Company Commands Reference

order
Configure the search order for the Remote Authentication Servers.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
order <priority>

The query order priority for the Remote

Authentication Servers.
The valid entry: first, second, third; The defaults for
priority the servers are set according to the server-number
component of the Entity Identifier (i.e., server-
number 1 is defaulted to first; server-number 2 is
defaulted to second, etc.).

Guidelines
This command configures the search order for the Remote Authentication Servers. The valid
values for this attribute are: first, second and third. The specified value for this Remote
Authentication Server must not already be assigned to an enabled RAS. Up to three RAP
servers (1-3) may be configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> order first
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv6
IPV4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 533

Oscilloquartz: An ADVA Company Commands Reference

RADIUS accounting port : 1813

Related Commands
accounting-port
retries
control
secret
ip-address (rap)
show rap-server
order
timeout
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 534

Oscilloquartz: An ADVA Company Commands Reference

organization
Setting for SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
organization <organization>

Organization for the SSL Certificate.

organization
Valid entry: up to 64 ASCII characters

Guidelines
This command sets the organization for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> organization ADVA Optical Networking
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 535

Oscilloquartz: An ADVA Company Commands Reference

organization-unit
Setting for SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
organization-unit <organization-unit>

organization- Organization Unit for the SSL Certificate.

unit Valid entry: up to 64 ASCII characters

Guidelines
This command sets the organization unit for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> organization-unit Ethernet Access
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 536

Oscilloquartz: An ADVA Company Commands Reference

outer-ethertype
Set the Outer Tag Ethertype for an Access Port or Network Port Flow Point.

Security Level
Provisioning

Command Level
Configure PTP - Configure NTE - Configure Access/Network Port - Configure PTP Flowpoint

Syntax
outer-ethertype <ethertype>

Set the Outer Tag EtherType (in hex) for this port.
ethertype Valid entry: Valid Ethertype (Hexidecimal) 0x8100 or
0x88A8; Default is 0.

Guidelines
Set the Ethertype to be used for the outer tag of a PTP Flowpoint.

Valid Ethertype (Hexidecimal) 0x8100 or 0x88A8; Default is 0.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-2
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> outer-
ethertype 0x8100
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> show ptp-fp
Alias :
PTP Flowpoint Type : monitoring
COS : 7
CIR : 128000
EIR : 0
Buffer Size : 10
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 101-1
Inner1 VLAN Ethertype : 34984

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 537

Oscilloquartz: An ADVA Company Commands Reference

Inner1 VLAN Tag List : 101-2

Inner2 VLAN Ethertype : 33024
Inner2 VLAN Tag List : 101-3
Operational State : outage
Admin State : in-service
Secondary States : sgeo

Related Commands
buffer-size inner<n>-vlan-list
cir inner<n>-ethertype
cos outer-untagged
eir outer-vlan-list
inner<n>-untagged show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 538

Oscilloquartz: An ADVA Company Commands Reference

outer-ethertype
Security Level
Provisioning

Command Level
Configure Access Port

Configure Network Port

Syntax
outer-ethertype <ethertype>

Set the Outer Tag EtherType (in hex) for this port.
ethertype Valid entry: Valid Ethertype (Hexidecimal) 0x1500 to
0xFFFF; Default is 0x8100.

Guidelines
Set the Outer Tag EtherType for an Ethernet Access port or Ethernet Network port. The
value range for this interface in hexadecimal is between 0x1500 and 0xFFFF inclusive.
Default is 0x8100.

For valid entry, see Parameter Rules / Valid entries.

Examples
ADVA 1---> network-element ne-1
ADVA 1--NE-1--> configure nte nteosa5422-1-1-1
ADVA 1--NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA 1--NE-1:access-1-1-1-1--> outer-ethertype 0x88a8
ADVA 1--NE-1:access-1-1-1-1--> show access-port
Admin State : unassigned
Operational State : normal
Secondary States : uas
Alias : Alias Text
Physical Entity Address : 00:80:ea:05:00:03
MTU : 9600
Link Status Trap Enable : enabled
Max Port Speed : 1000000000
Configured Port Speed : auto
Negotiated Port Speed : auto-1000-full
Media Type : copper
MDIX Control : auto
SFP Vendor Name : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 539

Oscilloquartz: An ADVA Company Commands Reference

SFP Part Number : Not Available

SFP Serial Number : Not Available
SFP Mfg Date : Not Available
SFP Connector Type : unknown
SFP Link Length : 0
SFP Media Type :
SFP Laser Wave Length : Not Available
Port Mode : co
Service Type : epl
Rx Pause Enabled : disabled
Tx Pause Enabled : disabled
Acceptable Frame Policy : all-afp
Port VLAN ID : 0-0
Priority VLAN ID : 0
Outer Tag Ethertype : 0x88a8
Port Shaping Enabled : disabled
Port Shaped Speed : 1048576000
<... output truncated...>

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 540

Oscilloquartz: An ADVA Company Commands Reference

outer-untagged
Enable or disable untagged outer VLANs associated with a PTP flowpoint.

Security Level
Provisioning

Command Level
Configure PTP - Configure NTE - Configure Access/Network Port - Configure PTP Flowpoint

Syntax
outer-untagged {disable | enable}

Guidelines
Enable or disable support for untagged frames for a PTP Flowpoint. Default is enabled
(untagged frames allowed).

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-33
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> outer-
untagged diabled
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-33--> show ptp-fp
Alias :
PTP Flowpoint Type : monitoring
COS : 0
CIR : 128000
EIR : 0
Buffer Size : 44
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 100
Inner1 VLAN Ethertype : 0
Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : outage
Admin State : management

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 541

Oscilloquartz: An ADVA Company Commands Reference

Secondary States : sgeo

Related Commands

buffer-size inner<n>-untagged
cir inner<n>-vlan-list
cos outer-ethertype
eir outer-vlan-list
inner<n>-ethertype show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 542

Oscilloquartz: An ADVA Company Commands Reference

outer-vlan-list
Sets the outer vlan list for a PTP Flow Point.

Command Level
Configure PTP - Configure NTE - Configure Access/Network Port - Configure PTP Flowpoint

Syntax
outer-vlan-list <vlan-eid>

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-2
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> outer-vlan-
list 101-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> show ptp-fp
Alias :
PTP Flowpoint Type : monitoring
COS : 7
CIR : 128000
EIR : 0
Buffer Size : 10
PTP Clock : none
EVC : none
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 101-1
...

Related Commands
buffer-size inner<n>-untagged
cir inner<n>-vlan-list
cos outer-ethertype
eir outer-untagged
inner<n>-ethertype show ptp-fp

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 543

Oscilloquartz: An ADVA Company Commands Reference

outertag-prio-ctrl
Enable or Disable outer tag priority control on a flow.

Security Level
Provisioning

Command Level
Configure Flow

Syntax
outertag-prio-ctrl <control>

Enable or Disable outer tag priority control.

control
Valid entry: enabled, disabled; Default is disabled.

Guidelines
Enables or disables outer tag priority control.

For valid entry, see Parameter Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> configure flow flow-1-1-1-1-1
ADVA-NE-1:flow-1-1-1-1-1--> outertag-prio-ctrl disabled
ADVA-NE-1:flow-1-1-1-1-1--> show flow
Admin State : in-service
Operational State : normal
Secondary States : act
Circuit Name : gyser3
Flow Type : regular-evc
Traffic Type : policed-and-shaped
Multi-COS Enabled : disabled
Hierarchical COS Management Enabled : disabled
Guaranteed Access to Network Bandwidth (bps) : 1024000
Maximum Access to Network Bandwidth (bps) : 1024000
Access to Network CIR (bps) : 1024000
Access to Network EIR (bps) : 0
Network to Access Rate Limiting : disabled
Network to Access CIR (bps) : 1024000
Network to Access EIR (bps) : 0
VLAN Members List : 20:30-*,31-*
Class Of Service(COS) : 1
Network to Access CoS Priority : outer-vlantag
Outer Tag Priority Swap : disabled
Untagged Enabled : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 544

Oscilloquartz: An ADVA Company Commands Reference

C-Tag Control : push

C-Tag : 1-0
C-Tag Match RX Priority : enabled
S-Tag Control : push
S-Tag : 1-0
SES Frame Loss Threshold Ratio (percent) : 30
ES Frame Loss Threshold : 1

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 545

Oscilloquartz: An ADVA Company Commands Reference

pdop-mask
Configure the Position Dilution of Precision (PDOP) mask value, where PDOP is a measure of
the error caused by the geometric relationship of the satellites in the position solution, and
is used to measure the current satellite geometry.

Use this command to exclude a position calculated based on poor PDOP to be used during
location survey.

PDOP is applicable only during self-survey or whenever the receiver is per-

forming position fixes. The PDOP Mask displays Not Available after the
GNSS receiver terminates self-survey mode.

Command Level
Configure GPS-Port

Syntax
pdop-mask <integer>

The PDOP mask value.

integer
Valid values: 2 to 12.

Guidelines
Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa54221-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> pdop-mask 8
ADVA-NE-1:gnss-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 546

Oscilloquartz: An ADVA Company Commands Reference

Self Survey Period : 2000

Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pps-generation
gnss-system-types show gps-port
delay-type delay-value
elevation-mask show satellite-entries
cno-mask sat-min1-threshold
self-survey-period sat-min2-threshold

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 547

Oscilloquartz: An ADVA Company Commands Reference

pdv-limit-assured
Configure Network PDV limit for Assured performance.

Security Level
Provisioning

Command Level
Configure Syncjack

Syntax
pdv-limit-assured <probe-eid>

pdv-limit- PDV assured value.

assured Valid entry: 1 - 4294967295

Guidelines
This command allows the configuration of the PDV assured value of a Syncjack PTP Network
Probe.

Examples
Refer to this example:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> pdv-limit-assured 25000
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1
Name : doctest
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : yes
No Time Stamp Failure : no
No Event Message Failure : yes
Slave Ip Address : 123.123.123.123
Master Ip Address : 123.123.123.0
Reference Eid : ts-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 548

Oscilloquartz: An ADVA Company Commands Reference

Res PDV fwd High Range, (ns) : 2000

Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
PDV Assured, (ns) : 25000
PDV Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : Not Available
Reverse Score : Not Available

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 549

Oscilloquartz: An ADVA Company Commands Reference

pdv-limit-satisfied
Configure Network PDV limit for Satisfied performance.

Security Level
Provisioning

Command Level
Configure Syncjack

Syntax
pdv-limit-satisfied <pdv-limit-satisfied>

pdv-limit- PDV satisfied value.

satisfied Valid entry: 1 - 4294967295

Guidelines
This command allows the configuration of the PDV satisfied value of a Syncjack PTP
Network Probe.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> pdv-limit-satisfied 150000
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1
Name : doctest
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : yes
No Time Stamp Failure : no
No Event Message Failure : yes
Slave Ip Address : 123.123.123.123
Master Ip Address : 123.123.123.0
Reference Eid : ts-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 550

Oscilloquartz: An ADVA Company Commands Reference

Res PDV rev Medium Range, (ns) : 500

Res PDV rev High Range, (ns) : 2000
PDV Assured, (ns) : 25000
PDV Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : Not Available
Reverse Score : Not Available

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 551

Oscilloquartz: An ADVA Company Commands Reference

phase-performance-target
Configure the phase performance target of a Syncjack Telecom Slave.

Security Level
Provisioning

Command Level
Configure syncjack

Syntax
phase-performance-target <phase-target>

Target value for phase performance measurements

phase-target in nanoseconds.
Valid entry: 1 - 100000, default 500

Guidelines
This command is used to configure the target value for phase performance in nanoseconds
for a Syncjack Telecom Slave.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure telecom-slave ts-1-1
ADVA-NE-1:syncjack:clock-analysis:ts-1-1--> phase-performance-target 1250
ADVA-NE-1:syncjack:clock-analysis:ts-1-1--> back
ADVA-NE-1:syncjack:clock-analysis--> show syncjack-telecom-slave ts-1-1
Clock Recovery State : freerun
FREQUENCY RECOVERY PERFORMANCE :
Frequency traceability : false
Time since Frequency traceability change, (s) : 2008
Frequency recovery target mask : g823-PDH-traffic
Current Clock Recovery Score : Not Available
Time of Last Clock Recovery Score update : 2014-01-24,17:24:53
PHASE RECOVERY PERFORMANCE :
Time traceability : false
Time since Time traceability change, (s) : 2008
Target Phase Recovery Accuracy, (ns) : 1250
Current Phase Recovery Score : Not Available
Time of Last Phase Recovery Score update : 2014-01-24,17:24:53

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 552

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add clock-probe
master-ip-address
add ptp-clock-probe
mtie-mask-margin
delete clock-probe
mtie-mask-type
delete ptp-clock-probe
name (ne, probe)
delete history-result
phase-performance-target
show clock-probe
ptp-flowpoint
show ptp-clock-probe
reference, reference-eid
show syncjack-telecom-slave
slave-ipv4-address
show history-result
source-eid
direction
source-type
expected-ql
target-mtie-performance
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 553

Oscilloquartz: An ADVA Company Commands Reference

ping
The ping command is used to verify IP connectivity to a specified host IPv4 address.

The ping command operates by generating an ICMP Echo request message and listening
for an ICMP Echo response packet. The results of the ICMP Echo request are displayed in
the results.

Security Level
Maintenance

Command Level
Any

Syntax
ping <ip-address> eth0

IPv4 address of a station to reach.

ip-address
Valid entry: Valid IPv4 Address
eth0 The interface name.

Examples
ADVA:comms--> ping 10.10.10.10
ADVA:comms--> show ping-result
--- 10.10.10.10 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 554

Oscilloquartz: An ADVA Company Commands Reference

ping6
Verify IP connectivity to a specified host IPv6 address.

Security Level
Maintenance

Command Level
Any

Syntax
ping6 <ipv6-address> [<interface>]

The IPv6 address to ping.

ipv6-address Valid entry: A valid IPv6 Unicast address or an IPv6
link local address.
The name of the interface where the remote host is
supposed to be reachable.
interface
Valid entry: A valid IPv6 address (not including in-
band management).

Guidelines
This command is used to test the reachability of a particular IPv6 host by sending ICMPv6
Echo request messages and receiving ICMPv6 Echo response packets. The results of the
ICMPv6 Echo request are displayed in the results.

l If an IPv6 link local address is entered, an interface must be specified as the system
cannot determine to which interface it should send the echo requests. An IPv6 Link
Local address starts with FE80.
l If an IPv6 Global Unicast address is entered, the interface is automatically
determined and the user cannot enter a value.

Pinging an IP address does not include in-band

management for IPv6 addresses.

Examples
ADVA--> configure communication

ADVA:comms--> ping6 FDAA:0000:0000:0000:0000:0000:0000:000A

ADVA:comms--> show ping-result

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 555

Oscilloquartz: An ADVA Company Commands Reference

--- FDAA:0000:0000:0000:0000:0000:0000:000A ping statistics ---

5 packets transmitted, 5 received, 0% packet loss

Related Commands
add arp-entry
delete ndp-entry
add ndp-entry show ipv6-routes
flush-arp-cache
add ip-route show mgmttnl
flush-ndp-cache
add ipv6-route show ping-result
list mgmttnl
add mgmttnl show src-addr
ping
configure src-addr show trace-route-
show arp-entries
delete arp-entry result
show eth0
delete ip-route trace-route
show ip-interface eth0
delete ipv6-route trace-route6
show ip-routes
delete mgmttnl

pm-interval
Sets a performance monitoring interval for the network element.

Security Level
Provisioning

Command Level
Network Element

Syntax
pm-interval <interval>

The interval in minutes.

interval Valid entries: 15min, 5min
Default value is 5min.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> pm-interval 15min

poe
Enables or disables Power over Ethernet (POE) on access port 1 (access-1-1-1-1).

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 556

Oscilloquartz: An ADVA Company Commands Reference

Command Level
Configure access-port

Syntax
poe <control>

Enable or disable POE.

control
Valid values: enabled, disabled. Default is disabled.

Examples

ADVA--> network-element ne-1

ADVA-NE-1-->
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1-->
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1-->
ADVA-NE-1:access-1-1-1-1--> poe
disabled enabled
ADVA-NE-1:access-1-1-1-1--> poe enabled
ADVA-NE-1:access-1-1-1-1-->

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 557

Oscilloquartz: An ADVA Company Commands Reference

polling-interval
This configures the Polling Interval in NTP, in seconds.

Security Level
Provisioning

Command Level
NTP Client

Syntax
polling-interval <interval>

This is the number of seconds with a power of 2

within the allowed range.
interval
Valid entries: 16, 32, 64, 128, 256, 512, and 1024
Default value is 16 seconds.

Examples
ADVA--> configure system
ADVA:system--> ntp-client
ADVA:system:ntp_client--> polling-interval 128
ADVA:system:ntp_client--> show ntp-client
Primary Server IP Version : ipv4
Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : primary
Round-trip delay to NTP server (micro secs) : 258
NTP server precision (micro secs) : 1000001
Polling interval (seconds) : 128

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 558

Oscilloquartz: An ADVA Company Commands Reference

port
Configures the port for the remote authentication server entry. The valid ports that can be
configured for a Remote Authentication Server include: Local Management Port. Up to
three RAP servers (1-3) may be configured.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
port <rap-port>

The Port Number to be used for this Remote Authentication Server.

rap-port Valid entry: Valid Port (Local Management Port only); Default is
1812.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> port 1812
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

Related Commands
accounting-port
retries
ip-address (rap)
secret
ip-version (rap)
show rap-server
ipv6-address (rap)
timeout
order

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 559

Oscilloquartz: An ADVA Company Commands Reference

pps-generation
Sets the minimum number of satellites that need to be locked before the system can
generate PPS output.

Command Level
Configure GPS-Port

Syntax
pps-generation [1sat | 3sats]

1sat Default. A single satellite is required to generate PPS output.

3sats Three satellites are required to generate PPS output.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> pps-generation 3sats
ADVA-NE-1:nteosa5422-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 560

Oscilloquartz: An ADVA Company Commands Reference

Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
delay-type show gps-port
gnss-system-types delay-value
elevation-mask cno-mask
sat-min1-threshold show satellite-entries
sat-min2-threshold self-survey-period

pps-width
Set the PPS output width in microseconds.

Command Level
configure pps-port

Syntax
pps-width <pps-width>

PPS output width in microseconds.

pps-width
Valid values: 1 to 500,000µs. The default is 134,200µs.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure pps-port pps-1-1-1-1
ADVA-NE-1:pps-1-1-1-1--> pps-width 134200

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 561

Oscilloquartz: An ADVA Company Commands Reference

prefix-length
Manually configure the IPv6 Unicast address prefix length of a Management DCN. This IPv6
attribute is only displayed, when the ip-mode is set to ipv4-and-ipv6. Otherwise, only
the IPv4 attributes are displayed.

IPv6 address prefix is usually automatically configured. Manual configuration is requested

only when dhcpv6-control is disabled.

Command Level
Configure Communications

Syntax
configure eth0 prefix-length <prefix-length>

The prefix length of the IPv6 address.

prefix-length
Valid entry: 0-128.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0 prefix-length 60
ADVA:comms--> show eth0
Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 60
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 562

Oscilloquartz: An ADVA Company Commands Reference

IPv6 Link Local Address Prefix Length : 64

IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
add ndp-entry ip-address (comms)
add ip-route ip-mode
add mgmttnl ipv6-unicast-addr
buffer-size ipv6-sys-def-gateway
cir list mgmttnl
cos netmask
dhcp-client-id rip2Pkts-control
dhcp-client-id-control show mgmttnl
dhcp-control svlan-control
eir svlan-id
dhcpv6-control sys-def-gateway
rip-ng-control vlan-id
ping6 show eth0
trace-route6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 563

Oscilloquartz: An ADVA Company Commands Reference

primary-server
Configure the IP address of the primary Network Time Protocol (NTP) Server.

Security Level
Provisioning

Command Level
NTP Client

Syntax
primary-server <ip-version>[<ipv4-address>|<ipv6-address>]

The IPv4 address of the Primary NTP Server.

ipv4-address
Valid entry: Valid IPv4 address.
The IPv6 address of the Primary NTP Server.
ipv6-address Valid entry: Valid IPv6 unicast address of the primary
NTP server.
The version of the IP address to be used.
ip-version
Valid entry: ipv4, ipv6.

Guidelines
This command is used to configure the IP address of the primary NTP Server. Setting this
address to 0.0.0.0 disables this server from being used.

Examples
ADVA--> configure system
ADVA:system--> ntp-client
ADVA:system:ntp_client--> primary-server 192.168.179.110
ADVA:system:ntp_client--> show ntp-client

Primary Server IP Version : ipv4

Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : primary
Round-trip delay to NTP server (micro secs) : 258

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 564

Oscilloquartz: An ADVA Company Commands Reference

NTP server precision (micro secs) : 1000001

Polling interval (seconds) : 16

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 565

Oscilloquartz: An ADVA Company Commands Reference

priority1
Set Clock priority 1.

Security Level
Provisioning

Command Level
Configure Master Clock

Configure PTP Clock

Syntax
priority1 <priority_1>

priority_1 Priority 1 (based on IEEE 1588v2).

Guidelines
This command is used to edit a Precision Time Protocol Master Clock (PTP MC) or PTP Clock
Priority 1.

Examples
Example for a master clock:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> priority1 1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show master-clock

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Clock Class : 0
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none
PTP Profile : g.8265.1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 566

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add master-clock
localpriority
add ptp-clock
priority1
admin-state
priority2
alias
show master-clock
assumed-ql
show ptp-clock
delete ptp-clock
show ptp-port
expected-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 567

Oscilloquartz: An ADVA Company Commands Reference

priority2
Set Clock priority 2.

Security Level
Provisioning

Command Level
Configure Master Clock

Configure PTP Clock

Syntax
priority2 <priority_2>

priority_2 Priority 2 (based on IEEE 1588v2).

Guidelines
This command is used to edit a Precision Time Protocol Master Clock (PTP MC) or PTP Clock
Priority 2.

Examples
Example for a master clock:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> priority2 2
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show master-clock

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Clock Class : 0
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none
PTP Profile : g.8265.1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 568

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add master-clock localpriority
add ptp-clock priority1
admin-state priority2
alias show master-clock
assumed-ql show ptp-clock
delete ptp-clock show ptp-port
expected-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 569

Oscilloquartz: An ADVA Company Commands Reference

priority (sync/timeclock)
Set the Priority for a configured sync reference.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
priority [<syncref-eid> | <timeref-eid>] <priority-val>

The entity identifier of the synchronization reference.

syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref

index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1
Priority Value for a given sync reference.
priority-val
Valid entry: 1 to 10.

Guidelines
Once a sync reference has been configured, the priority assigned can be edited using this
command.

Examples
Example at the Configure Sync level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> priority syncref-1-1-1-1-1 2
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1

Alias :
Priority : 2
Source : bits_in-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 570

Oscilloquartz: An ADVA Company Commands Reference

Status : ref-failed
Received QL : ql-nsupp
State : unavailable
Effective QL : ql-failed

Example at the Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> priority timeref-1-1-1-1-1 1
ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-1 1

Alias : GPS1
Priority : 1
Source : gps-1-1-1-1
Status : ref-ok
State : active

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 571

Oscilloquartz: An ADVA Company Commands Reference

priority-mode
Configure the Priority Mode.

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
priority-mode <mode>

The priority mode.

mode
Valid entry: dscp, tos, none. The default is none.

Guidelines
This command is used to configure the Priority Mode.

Example
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> priority-mode dscp
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave Address : 100.100.10.0
Slave Subnet Mask : 255.255.255.255
Interface name : doctest
Current Offset From Master : 0
Current History 15 min. Index : 0
Master Clock Type : one-step
Unicast Message negotiation : disabled
Master Delay Mechanism : end-to-end
Master Priority : 0
Master IP Version : ipv4
Master IPv4 Address : 100.100.10.1
Master Announce Message Rate : 1-pkt-per-sec

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 572

Oscilloquartz: An ADVA Company Commands Reference

Master Announce Receipt Timeout : 2

Master Delay Response Message Rate : 1-pkt-per-sec
Master Delay Response Receipt Timeout : 128
Master Sync Message Rate : 1-pkt-per-sec
Master Sync Receipt Timeout : 10
Master Lease Duration : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : dscp
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1

Related Commands
add ocs-port priority-mode-value
admin-state
alias show last-rcv-delay-rsp-msg
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show ocs-port
show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 573

Oscilloquartz: An ADVA Company Commands Reference

priority-mode-value
Configure the Priority mode value.

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
priority-mode-value <priority>

The priority value.

priority
Valid entry: 0-2147483647. The default is 0.

Guidelines
This command is used to configure the Priority mode value.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
DVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> priority-mode-value 5
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave IPv4 Address : 110.110.10.10
Slave Subnet Mask : 255.255.255.0
Slave IPv6 Address : Not Available
Slave Prefix : Not Available
Interface name : sooc1
Current Offset From Master, (ns) : 0
Current History 15 min. Index : 0
Master Clock Type :
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end
Master Priority : 128
Master IP Version : ipv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 574

Oscilloquartz: An ADVA Company Commands Reference

Master IPv4 Address : 110.110.110.10

Master IPv6 Address : Not Available
Master Announce Message Rate : 1-pkt-per-16-sec
Master Announce Receipt Timeout, (intervals) : 2
Master Delay Response Message Rate : 32-pkt-per-sec
Master Delay Response Receipt Timeout,
(intervals) : 255
Master Sync Message Rate : 32-pkt-per-sec
Master Sync Receipt Timeout, (intervals) : 255
Master Lease Duration, (s) : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : 5
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1
Expected Clock Class : 247
E2E Asymmetry Delay Comp Mode : automatic
E2E Asymmetry Delay Comp Status : operational
E2E Asymmetry Delay Comp Value, (ns) : -50
Lockout Control : disabled
Protection State : active
WTR : false
Clock Recovery State : normal
Phase Recovery State : normal

Related Commands
add ocs-port priority-mode-value
admin-state show last-rcv-delay-rsp-msg
alias show last-rcv-sync-msg
delete ocs-port show ocs-port
master-announce-rcpt-timeout show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 575

Oscilloquartz: An ADVA Company Commands Reference

prompt
Change the SubNetwork or Network Element Component of the CLI Command Prompt.

Security Level
Provisioning

Command Level
Configure System

Network Element

Syntax
prompt <rootPrefix>
prompt <nePrefix>

A short character string to be used as the CLI

SubNetwork (Root) command Prompt Prefix. This
command is executed at root level.
rootPrefix Valid entry: Character string - 0 to 64 characters (8 or
fewer characters are recommended); an empty string
or string containing spaces must be enclosed in
quotation marks.Default is ADVA.
A short character string to be used as the Network
Element command Prompt Prefix. This command is
executed at Network Element Configuration level.
nePrefix Valid entry: Character string - 0 to 64 characters (8 or
fewer characters are recommended); an empty string
or string containing spaces must be enclosed in
quotation marks. Default is NE-n.

Guidelines
This command is used modify the root (SubNetwork) component of the CLI prompt or
Network Element level of the CLI prompt. The base part of the CLI command prompt is
made up of two components: the SubNetwork component and the Network Element
component. At the Root level of the CLI tree, only the SubNetwork component is shown,
such as ADVA-->. Once the user moves to a specific Network Element, the base component
of the CLI prompt is appended with the specific NE command prompt (ADVA:NE-n-->).

Examples
For a subnetwork:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 576

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> prompt WestSide

Westside--> show subnetwork

Subnetwork CLI Prefix : Westside

For a Network Element:

ADVA--> network-element ne-1

ADVA-NE-1--> prompt NE_1
ADVA-NE_1-->

Related Commands
admin-state show alarm-attributes
autoprov-mode show ne-alarms
contact show ne-conditions
location show network-element
name (ne, probe) show shelf-info
opr-lamptest

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 577

Oscilloquartz: An ADVA Company Commands Reference

proxy-arp
Enable or Disable proxy ARP.

Security Level
Provisioning

Command Level
Configure System

Syntax
proxy-arp [enable | disable]

Guidelines
This command is used to enable or disable the proxy ARP on the NE.

Examples
ADVA--> configure system
ADVA:system--> proxy-arp disabled
ADVA:system--> show system
System Name : OSA 5422
System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
...

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 578

Oscilloquartz: An ADVA Company Commands Reference

ptp-flowpoint
Configure the PTP flow point EID for a Syncjack PTP Clock Probe or PTP Network Probe.

Security Level
Provisioning

Command Level
Configure Syncjack

Syntax
ptp-flowpoint <ptp_fp-eid>

The entity identifier of PTP Flow Point. Valid entry:

For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-
ptp_fp-eid n. Where: ne=1, shelf=1, slot=1, port=1, n=1-m (max
ptp flow points). Example: acc_ptp_flow_pt-1-1-1-3-
1.

Guidelines

This command is used to configure a PTP Flowpoint for a Syncjack probe. The PTP
Flowpoint can not be edited if the clock probe belongs to an active schedule.

The PTP Flowpoint must be previously created in “Configure PTP" (see G.8275.1 Remote
Slave Provisioning Order).

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> ptp-flowpoint-eid acc_ptp_flow_pt-1-1-1-1-5
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe
Name : PtpClockProbe1
Current State : running
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : acc_ptp_flow_pt-1-1-1-1-5
IP Version : ipv4
Slave Ip Address : 10.0.0.2
Master Ip Address : 10.0.0.1
Direction : master-to-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 579

Oscilloquartz: An ADVA Company Commands Reference

Reference Eid : time_clock-1-1-1-1

Expected QL : ql-none
MTIE MaskType : g8272-prtc
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -24
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 580

Oscilloquartz: An ADVA Company Commands Reference

| 10000.0s | 37 | OK | OK |
| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add ptp-clock-probe
master-ip-address
delete ptp-clock-probe
mtie-mask-margin
delete history-result
mtie-mask-type
show ptp-clock-probe
mtie-restart
show syncjack-telecom-slave
name (ne, probe)
show history-result
ptp-flowpoint
direction
reference, reference-eid
expected-ql
slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 581

Oscilloquartz: An ADVA Company Commands Reference

ql-mode
Enable or disable QL Mode for an interface. QL Mode can not be enabled for BITS In/Out if
the BITS line type (bits-line-type) is set to 2048kbps. For the BITS Out interface, if the QL
Mode is set to disabled and the T1/E1 configuration supports SSM, the port transmits a QL
value of QL-DNU. If the T1/E1 configuration is changed to not support SSM, QL Mode is
automatically disabled. For valid entry, see Parameter Rules / Valid entries.

Security Level
Command Level
Configure Access Port

Configure BITS In/Out

Configure Telecom Slave

Syntax
ql-mode <control>

The control indicating if QL Mode is used.

control
Valid entry: enabled, disabled. Default is enabled.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-out bits_out-1-1-1-1
ADVA-NE-1:bits_out-1-1-1-1--> ql-mode enabled
ADVA-NE-1:bits_out-1-1-1-1--> show bits-out
Alias : FantasticSam
Admin State : in-service
Operational State : Not Available
Secondary State : Not Available
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-g7039-crc4
SA Bit : bit4
QL Mode : enabled
Squelch QL : ql-none
Transmit QL : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 582

Oscilloquartz: An ADVA Company Commands Reference

reboot
Reboot the equipment.

Security Level
Provisioning

Command Level
Configure NTE

Syntax
reboot <mode>

Mode of reboot.
mode
Valid entry: cold, warm

Guidelines
This command is used to reinitialize the NTE or a Line Card.

l Rebooting a equipment can take a few minutes.

l Rebooting a equipment can causes traffic loss.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422 -1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> reboot cold
ADVA-NE-1:nteosa5422-1-1-1-->

Related Commands
admin-state show nte
show alarm-attributes test-alarm

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 583

Oscilloquartz: An ADVA Company Commands Reference

reference, reference-eid
Configure the reference EID of a Clock Probe, PTP Clock Probe or PTP Network Probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Configure PTP Clock Probe

Configure PTP Network Probe

Syntax
For Clock Probe and PTP Clock Probe:
reference-eid <reference_port-eid>

Identifies the reference port.

reference_
port-eid Valid entry: available references, see the OSA 5422
Operation and Provisioning Manual.

For PTP Network Probe:

reference <reference_port-eid>

Identifies the reference port.

reference_
port-eid Valid entry: Equipment and Entity Identifier (EID)
Naming Conventions

Guidelines
This command is used to configure the reference EID for a Syncjack probe. The reference
EID can not be edited if the probe belongs to an active schedule.

Examples
Example at the Configure Clock Probe level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> reference-eid gps-1-1-1-1
ADVA-NE-1:syncjack:clock_probe-1-2--> back

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 584

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2

Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 585

Oscilloquartz: An ADVA Company Commands Reference

| 200.0s | N/A | N/A | N/A |

| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add clock-probe ip-version
add ptp-clock-probe master-ip-address
delete clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show clock-probe name (ne, probe)
show ptp-clock-probe ptp-flowpoint
show syncjack-telecom-slave reference, reference-eid
show history-result slave-ipv4-address
direction source-eid
expected-ql source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 586

Oscilloquartz: An ADVA Company Commands Reference

regenerate-ssh-keys
Regenerate the SSH Keys.

Security Level
Superuser

Command Level
Configure User Security

Syntax
regenerate-ssh-keys

Guidelines
This command regenerates the SSH keys.

Examples
ADVA--> configure user-security
ADVA:user-sec--> regenerate-ssh-keys

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 587

Oscilloquartz: An ADVA Company Commands Reference

regenerate-ssl-certificate
Regenerate the SSL Certificate.

Security Level
Superuser

Command Level
Configure User Security

Syntax
regenerate-ssl-certificate

Guidelines
This command regenerates the SSL Certificate. It uses the information stored in the
provisioned SSL Certificate to rebuild the active SSL Certificate.

Examples

ADVA--> configure user-security

ADVA:user-sec--> regenerate-ssl-certificate
ADVA:user-sec--> show active-ssl-certificate ssl_certificate-1
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
SHA1 Finger Print : 5E:8E:35:16:45:CF:F1:90:41:31:AA:A3:E5:C1:19:F9:71:66:D1:A8
MD5 Finger Print : A1:D3:D4:63:A2:1A:15:A5:40:9A:CD:EC:B7:13:68:45
Valid From : 2014-06-10,10:32:53
Valid Until : 2014-06-16,10:32:53

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 588

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

relay-option
Sets the relay port operation of the IRIG-B line card.

Command Level
configure irig-relay

Syntax
relay-option <1pph|1ppm|alarm|locked>

1pph Relay state switches every hour.

1ppm Relay state switches every minute.
alarm Relay state is not activate when critical alarm is raised.
locked Relay state is active when time clock is locked.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-relay irig_relay-1-1-2-1
ADVA-NE-1:irig_opt-1-1-2-1--> relay-option locked

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 589

Oscilloquartz: An ADVA Company Commands Reference

remove
Deletes a config file.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
remove <filename>

Guidelines
This command is used to delete an existing config file.

Examples
ADVA--> admin config-file
ADVA:config-file--> list
|File Name |Description
|---------------------|------------------------------------------------|
|configfile1 |original_instal_db
|configfile2 |

ADVA:config-file--> remove configfile1

ADVA:config-file--> list
|File Name |Description
|---------------------|------------------------------------------------|
|configfile2 |

ADVA:config-file-->

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 590

Oscilloquartz: An ADVA Company Commands Reference

remove diag-file
Deletes a diagnostic file.

Security Level
Provisioning

Command Level
Admin Diagnostics

Syntax
remove diag-file

Guidelines
This command is used to delete an existing diagnostics file.

Examples
ADVA--> admin diagnostics
ADVA:diagnostics--> remove diag-file
ADVA:diagnostics--> show diag-file

Diag File : not Available

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 591

Oscilloquartz: An ADVA Company Commands Reference

restart-with-configfile
This command reboots the NE and loads the designated config file.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
restart-with-configfile <filename> [no | yes]

Guidelines
This command reboots the NID and executes the designated config file. Execution of a
config file changes the running configuration of the database. One use for this command is
to automatically update the database to a desired configuration after resetting the
database to default values.

Entering “no" cancels the operation and entering “yes" enables the config file for execution.

This operation modifies the current running configuration. Ensure that the configuration of
the config file matches that of the system, or traffic may be affected.

Examples

ADVA--> admin config-file

ADVA:config-file--> list
|File Name |Description
|----------------------|---------------------------------------------------------|
|configfile_1 |
|configfile_2 |
ADVA:config-file--> restart-with-configfile configfile_2 yes

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 592

Oscilloquartz: An ADVA Company Commands Reference

restore-db
Restore (and install) a backup copy of the system database. The second step of restoring a
database.

Security Level
Provisioning

Command Level
Admin Database

Syntax
restore-db

Guidelines
This command is used to install a previous backup. Prior to executing this command, the
database must first be copied from the remote server using the transfer-file command.

Database restore is not allowed if a software upgrade is in progress.

This operation will overwrite the local database when it is activated (see activate-db). Care
must be taken to ensure that the configuration of the restored database matches that of the
system, or traffic may be affected.

Examples

ADVA--> admin database

ADVA:database--> restore-db
ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

Related Commands
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 593

Oscilloquartz: An ADVA Company Commands Reference

retries
Configure the number of retries that will be attempts for particular security access request
to this Remote Authentication Server.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
retries <num-retries>

The number of attempts made to this Remote

num-retries Authentication Server before giving up.
Valid entry: 1 to 5; Default is 3.

Guidelines
This command configures the number of retries that will be attempts for particular security
access request to this Remote Authentication Server. Up to three RAP servers (1-3) may be
configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> retries 3
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 594

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
accounting-port
control
retries
ip-address (rap)
secret
ip-version (rap)
show rap-server
ipv6-address (rap)
timeout
order
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 595

Oscilloquartz: An ADVA Company Commands Reference

revert to-standby
Revert to previous software version on standby side.

Security Level
Provisioning

Command Level
Admin Upgrade

Syntax
revert to-standby

Guidelines
Use this command to force switching to the software version on the standby side.

This operation causes a system reboot and may affect the configured database. Care must
be taken to ensure that the configuration of the restored database matches that of the
system, or traffic may be affected.

Examples
ADVA--> admin upgrade
ADVA:upgrade--> revert to-standby

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 596

Oscilloquartz: An ADVA Company Commands Reference

rip2Pkts-control
Enable or Disable RIPv2 protocol for a management interface or tunnel.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
For DCN (eth0):
configure <ip-eid> rip2Pkts-control [enabled | disabled]

IPv4 Entity Identifier.

ip-eid
Valid entry: eth0

For Management Tunnel:

rip2Pkts-control [enabled | disabled]

Guidelines
This command is used to enable or disable RIPv2 protocol on this IPv4 Interface.

Examples
For DCN (eth0)

ADVA--> configure communication

ADVA:comms--> configure eth0 rip2Pkts-control disabled
ADVA:comms--> show eth0
Name : eth0
IP Address : 10.10.35.98
Netmask : 255.255.240.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:39:d2:c0:
System Default Gateway : 10.10.32.1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 597

Oscilloquartz: An ADVA Company Commands Reference

For Management Tunnel:

ADVA--> configure communication

ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> rip2Pkts-control disabled
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 598

Oscilloquartz: An ADVA Company Commands Reference

rip-ng-control
Enable or disable Routing Information Protocol next generation (RIPng) packets on a
Management DCN.

This IPv6 attribute is only displayed, when the ip-mode is set

to ipv4-and-ipv6. Otherwise, only the IPv4 attributes are
displayed.

Security Level
Provisioning

Command Level
Configure Communications

Syntax
ring-ng-control <ripng-ctrl>

Enable or disable RIPng.

ripng-ctrl Valid entry: enabled, disabled. The default is
disabled.

Guidelines
This command is used to enable or disable Routing Information Protocol next generation
(RIPng) packets. When RIPng is enabled on an IPv6 interface, the interface receives the IPv6
route entry on the link and updates the local route table. The interface also sends local IPv6
route entries to the link using multicast packets.

Examples
ADVA--> configure communication
ADVA:comms--> configure eth0rip-ng-control enabled

ADVA:comms--> show eth0

Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 599

Oscilloquartz: An ADVA Company Commands Reference

RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : enabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
add arp-entry
add ndp-entry
ip-address (comms)
add ip-route
ip-mode
add ipv6-route
ipv6-sys-def-gateway
add mgmttnl
list mgmttnl
buffer-size
netmask
cir
prefix-length
cos
rip2Pkts-control
dhcp-client-id
show mgmttnl
dhcp-client-id-control
svlan-control
rip-ng-control
svlan-id
eir
sys-def-gateway
dhcpv6-control
vlan-id
ipv6-unicast-addr
show eth0
ping6
trace-route6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 600

Oscilloquartz: An ADVA Company Commands Reference

rls-lpbk
Release an existing loopback on the Port.

Security Level
maintenance

Command Level
Loopback

Syntax
rls-lpbk

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> lpbk
ADVA-NE-1:access-1-1-1-1:lpbk--> rls-lpbk
ADVA-NE-1:access-1-1-1-1:lpbk--> show lpbk-params

Loopback VLAN 1 : 4094-0

Loopback VLAN 1 - Enabled : disabled
Loopback VLAN 2 : 4094-1
Loopback VLAN 2 - Enabled : disabled
Loopback VLAN 3 : 4094-2
Loopback VLAN 3 - Enabled : disabled
Loopback Type : none
Loopback Status : none
Loopback Timer : 10
Swap SADA : sada

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 601

Oscilloquartz: An ADVA Company Commands Reference

rpdv-frw-highrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Forward High
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-frw-highrange <resPDVfwdHighRange>

RPDV forward high range (in nanoseconds).

resPDVfwdHighRange
Valid entry: 1 - 4294967295, default is 2000

Guidelines
This command allows the configuration of the RPDV forward high range value for a PTP
Network Probe.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-frw-highrange 2000
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 602

Oscilloquartz: An ADVA Company Commands Reference

Res PDV fwd Medium Range, (ns) : 500

Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 603

Oscilloquartz: An ADVA Company Commands Reference

rpdv-frw-lowrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Forward Low
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-frw-lowrange <resPDVfwdLowRange>

RPDV forward low range (in nanoseconds).

resPDVfwdLowRange Valid entry. 1 - 429496729. (must be below the

rpdv-frw-mediumrange setting). Default is
200

Guidelines
This command allows the configuration of the RPDV forward low range value for a Syncjack
PTP Network Probe. The set value must be below the rpdv-frw-mediumrange setting.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-frw-lowrange 200
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe 1
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 604

Oscilloquartz: An ADVA Company Commands Reference

Actual Test Duration, (s) : 0

Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 605

Oscilloquartz: An ADVA Company Commands Reference

rpdv-frw-mediumrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Forward Medium
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-frw-mediumrange <resPDVfwdMediumRange>

RPDV forward medium range (in

nanoseconds).

resPDVfwdMediumRange Valid entry: 1 - 4294967295. (must be

below the rpdv-frw-highrange setting and
above the rpdv-frw-lowrange setting),
default is 500

Guidelines
This command allows the configuration of the RPDV forward low range value for a PTP
Network Probe. The set value must be below the rpdv-frw-highrange setting and above the
rpdv-frw-lowrange setting.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-frw-mediumrange 500
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 606

Oscilloquartz: An ADVA Company Commands Reference

Master Ip Address : 10.206.206.1

Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 607

Oscilloquartz: An ADVA Company Commands Reference

rpdv-rev-highrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Reverse High
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-rev-highrange <resPDVrevHighRange>

RPDV reverse high range (in nanoseconds).

resPDVrevHighRange
Valid entry: 1 - 4294967295, default is 2000

Guidelines
This command allows the configuration of the RPDV reverse high range value for a PTP
Network Probe.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-rev-highrange 2000
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 608

Oscilloquartz: An ADVA Company Commands Reference

Res PDV rev Low Range, (ns) : 200

Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 609

Oscilloquartz: An ADVA Company Commands Reference

rpdv-rev-lowrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Reverse Low
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-rev-lowrange <resPDVrevLowRange>

RPDV reverse low range (in nanoseconds).

resPDVrevLowRange Valid entry: 1 - 4294967295. (must be below

the rpdv-rev-mediumrange setting), default is
200

Guidelines
This command allows the configuration of the RPDV reverse low range value for a PTP
Network Probe. The set value must be below the rpdv-rev-mediumrange setting.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-rev-lowrange 200
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 610

Oscilloquartz: An ADVA Company Commands Reference

Res PDV fwd Medium Range, (ns) : 500

Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 611

Oscilloquartz: An ADVA Company Commands Reference

rpdv-rev-mediumrange
Configure the PTP Network Probe Residual Packet Delay Variation (RPDV) Reverse Medium
Range setting.

Security Level
Provisioning

Command Level
Configure PTP Network Probe

Syntax
rpdv-rev-mediumrange <resPDVrevMediumRange>

RPDV reverse medium range (in

nanoseconds).

resPDVrevMediumRange Valid entry. 1 - 4294967295. (must be

below the rpdv-rev-highrange setting and
above the rpdv-rev-lowrange setting),
default is 500

Guidelines
This command allows the configuration of the RPDV reverse low range value for a PTP
Network Probe. The set value must be below the rpdv-rev-highrange setting and above the
rpdv-rev-lowrange setting.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> rpdv-rev-mediumrange 500
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1
Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 612

Oscilloquartz: An ADVA Company Commands Reference

Res PDV fwd Medium Range, (ns) : 500

Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe reference, reference-eid
delete ptp-network-probe restart-with-configfile
show ptp-network-probe rpdv-frw-lowrange
expected-ql rpdv-frw-mediumrange
ip-version rpdv-rev-highrange
master-ip-address rpdv-rev-lowrange
name (ne, probe) rpdv-rev-mediumrange
pdv-limit-assured show ptp-network-probe
pdv-limit-satisfied show ptp-fp
ptp-flowpoint slave-ipv4-address

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 613

Oscilloquartz: An ADVA Company Commands Reference

sa-bit
Allows the user to select the desired BITS SA bit when the line type is E1.

Security Level
Provisioning

Command Level
Configure BITS In/Out

Syntax
sa-bit <sabit>

The desired BITS SA bit for either BITS In or BITS Out.

The desired selection is applied to both interfaces
regardless of which one is being edited.

sabit Valid entry (for e-1 only): bit4, bit5, bit6, bit7, bit8.
Default is bit4.
for t1: N/A.
for 2048hz: N/A.

Guidelines
This command allows the user to select the desired BITS SA bit when the line type is E1.
Whether editing the BITS In or the BITS Out, the selected SA bit is mirrored to the other BITS
interface, regardless of the admin-state of that interface. The SA bit is subservient to the
BITS Line Type, and is valid only for E1. If QL Mode is enabled, “none�? is not a valid SA bit
selection. Settings should be made in the order of: bits-line-type, line code, frame-format,
sa-bit.

For valid entry, see Parameter Rules / Valid entries .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-in bits_in-1-1-1-1
ADVA-NE-1:bits_in-1-1-1-1--> frame-format e1-dualframe
ADVA-NE-1:bits_in-1-1-1-1--> line-code e1-hdb3
ADVA-NE-1:bits_in-1-1-1-1--> sa-bit bit5
ADVA-NE-1:bits_in-1-1-1-1--> show bits-in
Alias : FantasticSam
Admin State : unassigned

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 614

Oscilloquartz: An ADVA Company Commands Reference

Operational State : Not Available

Secondary State : Not Available
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-dualframe
SA Bit : bit5
QL Mode : disabled
Assumed QL : ql-stu
Expected QL : ql-none
Received QL : Not Available

Related Commands
line-code
admin-state
ql-mode
alias
sa-bit
assumed-ql
show alarm-attributes
bits-line-type
show bits-in
expected-ql
show bits-out
frame-format (bits)
squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 615

Oscilloquartz: An ADVA Company Commands Reference

sat-min1-threshold
Sets the first minimum (Min1) number of in use satellite thresholds. The sat-min1-threshold
must be set before the sat-min2-threshold is set, and must be greater than the sat-min2-
threshold.

Command Level
Configure GPS-Port

Syntax
sat-min1-threshold <integer>

The sat-min1-threshold value.

integer
Valid values: 1 to 32.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> sat-min1-threshold 3
ADVA-NE-1:gnss-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 616

Oscilloquartz: An ADVA Company Commands Reference

Coordinate Longitude : E34:53:5.454

Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
delay-type show gps-port
elevation-mask delay-value
cno-mask show satellite-entries
self-survey-period sat-min2-threshold

sat-min2-threshold
Sets the second minimum (Min2) number of in use satellite thresholds. The sat-min2-
threshold cannot be set before the sat-min1-threshold is set, and must be less than the sat-
min1-threshold value.

l If the number of valid satellites that the receiver observes is less than the sat-min2-
threshold, the Sat Min2 Threshold alarm is raised.
l l If the sat-min2-threshold is less than the number of valid satellites that the
receiver observes, and the number of satellites is less than the sat-min1-threshold,
the Sat Min1 Threshold alarm is raised.
l l If the sat-min1-threshold is less than or equal to the number of valid satellites
observed by the receiver, no alarm is raised.

Command Level
Configure GPS Port

Syntax
sat-min2-threshold <integer>

The sat-min1-threshold value.

sat-min2-threshold
Valid entry: 1 to 32.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gnss-1-1-1-1
ADVA-NE-1:gnss-1-1-1-1--> sat-min2-threshold 2
ADVA-NE-1:gnss-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 617

Oscilloquartz: An ADVA Company Commands Reference

Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
delay-type show gps-port
elevation-mask delay-value
cno-mask show satellite-entries
sat-min1-threshold self-survey-period

save
Create a config file.

Security Level
Provisioning

Command Level
Admin Config-file

Syntax
save <filename>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 618

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command is used to create a config file. The file is an editable text file based on the
show running-config command. The file contains the delta between the current running
configuration and the default database. While the file cannot be edited on the NID, the
transfer-file command can be used to copy the file to a remote server, where it can be
edited, then copied back to the NID.

The NID supports up to five config files at a time.

Examples

ADVA--> admin config-file

ADVA:config-file--> list
|File Name |Description
|----------------------|------------------------------------------------|
|configfile_1 |
ADVA:config-file--> save configfile_2
ADVA:config-file--> list
|File Name |Description
|----------------------|------------------------------------------------|
|configfile_1 |
|configfile_2 |

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 619

Oscilloquartz: An ADVA Company Commands Reference

save diag-file
Creates a diagnostic file.

Security Level
Provisioning

Command Level
Admin Diagnostics

Syntax
save diag-file

Guidelines
This command is used to create a diagnostics file.

Examples
ADVA--> admin diagnostics
ADVA:diagnostics--> save diag-file
ADVA:diagnostics--> show diag-file

Diag File : 2014-01-24,13:40:01

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 620

Oscilloquartz: An ADVA Company Commands Reference

scp
Enable or Disable Secure Copy Protocol (SCP).

Security Level
Provisioning

Command Level
Configure System

Syntax
scp <control>

Enable or Disable Secure Copy Protocol.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable the Secure Copy Protocol. If enabled, the Secure
Copy Protocol can be used for file transfer.

Examples
Refer to this example:

ADVA--> configure system

ADVA:system--> scp enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 621

Oscilloquartz: An ADVA Company Commands Reference

Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

secret
Configure the secret password for Remote Authentication Server requests.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
secret <password>

The secret password to be used when access the

Remote Authentication Server. This string is an
password
alphanumeric character string of between 8 and 64
characters.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 622

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command configures the secret password for Remote Authentication Server requests.
This string is an alphanumeric character string of between 8 and 64 characters. Up to three
RAP servers (1-3) may be configured.

Examples
Refer to this example:

ADVA--> configure user-security

ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> secret Thisisasecretcode
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

Related Commands
accounting-port
retries
control
secret
ip-address (rap)
show rap-server
order
timeout
port

secure-mode
Enables or disables security authentication for NTP clock.

Command Level
Configure NTP Clock

Syntax
secure-mode enabled|disabled.

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 623

Oscilloquartz: An ADVA Company Commands Reference

ADVA:ntp-NE-1--> configure ntp-clock ntp_clock-1-1

ADVA:ntp-NE-1:ntp_clock-1-1-->
ADVA:ntp-NE-1:ntp_clock-1-1--> secure-mode enabled

Related Commands
add ntp-clock, mode, server-state, sym-key-authentication, time-reference-loss-handling

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 624

Oscilloquartz: An ADVA Company Commands Reference

security-banner
Edit the post login Security Banner for the System.

Security Level
Provisioning

Command Level
Configure System

Syntax
security-banner <banner>

Configurable Security Banner.

Valid entry: Character string - 0 to 1024 characters.
Text string must be enclosed on quotes (“ “). To clear
banner the security banner information, specify a null string
in the argument: security-banner ““. Default is “This
is a private system. Unauthorized access or use may
lead to prosecution.�?

Guidelines
This command is modify the security banner that is display once a user has logged into the
system. When entering the string on the CLI, quote's must be used to delineate the string.
Quotes can be used within the Security Banner - but they must be escape sequenced with
the "\" character.

Examples
ADVA--> configure system
ADVA:system--> security-banner “This is a private system. Unauthorized access or use may
lead to prosecution. ?
ADVA:system--> show security-banner

This is a private system. Unauthorized access or use may lead

to prosecution.

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 625

Oscilloquartz: An ADVA Company Commands Reference

security-prompt
Enable or Disable CLI Security Prompt.

Security Level
Provisioning

Command Level
Configure System

Syntax
security-prompt [enabled | disabled]

Guidelines
This command is used to enable or disable the CLI security prompt on the NE.

Examples
ADVA--> configure system
ADVA:system--> security-prompt disabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 626

Oscilloquartz: An ADVA Company Commands Reference

Validation Timer Expiration : Not Applicable

Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 627

Oscilloquartz: An ADVA Company Commands Reference

security-strength
This command sets the security strength settings for configured users. This affects the rules
for user names and passwords.

High:

l User Name must be 6 to 32 characters in length and no spaces allowed.

l Password must be 12 to 32 characters in length.
l Password must contain only alphanumeric and special characters '# * % - _ . @ !'
and must not begin with '#'.
l Password must contain upper and lower case characters, at least 2 special
characters and at least 1 digit.
l Password must not contain more than 2 letters or digits repeated consecutively.
l Password must not contain a sequence of 3 consecutive alphanumeric characters in
ascending or descending order.
l Password must not be the same as the User Name.
l Password must not be 'password/passw0rd' in lower, upper or mixed case.

Medium:

l User Name must be 1 to 32 characters in length and no spaces allowed.

l Password must be 8 to 32 characters in length.
l Password must contain only alphanumeric and special characters '# * % - _ . @ !'
and must not begin with '#'.
l Password must contain upper and lower case characters, at least 1 special character
and at least 1 digit.
l Password must not contain more than 2 letters or digits repeated consecutively.
l Password must not contain a sequence of 3 consecutive alphanumeric characters in
ascending or descending order.
l Password must not be the same as the user name.
l Password must not be 'password/passw0rd' in lower, upper or mixed case.

Low:

l User Name must be 1 to 32 characters in length and no spaces allowed.

l Password must be 1 to 32 characters in length.
l Password must contain only alphanumeric and special characters '# * % - _ . @ !'
and must not begin with '#'.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 628

Oscilloquartz: An ADVA Company Commands Reference

Security Level
Superuser

Command Level
Configure User Security

Syntax
security-strength [high | medium | low]

Examples
ADVA--> configure user-security
ADVA:user-sec--> security-strength low
ADVA:user-sec--> show security-system
Authentication Protocol : none
Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : low
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 629

Oscilloquartz: An ADVA Company Commands Reference

security-trap-type
Configure the security trap type.

Security Level
Superuser

Command Level
Configure User Security

Syntax
security-trap-type [all | disabled | failed-login]

Guidelines
This command sets whether secured event SNMP traps are forwarded to a trap host, such as
the FSP Network Manager, whenever a user logs in or out of the application. If enabled,
SNMP login and logout traps are sent to the configured trap host. By default, the device is
configured not to send these login and logout traps. This setting is only relevant when you
are using the SNMP management interface.

Set one of these options:

l All: All login and logout timeout traps are sent.

l Failed Login: Only failed login traps are sent.
l Disabled: No traps related to user login or logout are sent. This is the default
option.

Note: Forwarding SNMP login and logout traps can be configured on any SNMP version.
We recommend that this setting is disabled when the SNMP version does not allow
encryption, such as when using SNMPv1 or SNMPv2.

Examples
To configure the security trap type:

ADVA--> configure user-security

ADVA:user-sec--> security-trap-type all
ADVA:user-sec--> show security-system
Authentication Protocol : none
Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 630

Oscilloquartz: An ADVA Company Commands Reference

....Log Anonymization Interval : 0

SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : all
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

Related Commands
access-order
auth-protocol
auth-type regenerate-ssl-certificate
config-ssl-strength security-strength
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level security-trap-type
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
nas-ipv6-address
regenerate-ssh-keys

self-survey-control
Enable or disable the self survey. When disabled, you must set the unit position by latitude,
longitude, and altitude.

Security Level
Provisioning

Command Level
Configure GPS Port

Syntax
self-survey-control <control> <latitude-direction> <latitude-degrees> <latitude-minutes>
<latitude-seconds> <longitude-direction> <longitude-degrees> <longitude-minutes>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 631

Oscilloquartz: An ADVA Company Commands Reference

<longitude-seconds> <altitude>

Enable or disable the GPS self survey. The default is

control
enabled.
latitude-direction N or E. Default is N.
latitude-degrees ddd. Default is 000.
latitude-minutes mm. Default is 00.
latitude-seconds ss.sss. Default is 00.000
longitude-direction E or W. Default is E.
longitude-degrees ddd. Default is 000.
longitude-minutes mm. Default is 00.
longitude-seconds ss.sss. Default is 00.000.
altitude xxxxx.x. Default is 00000.0

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte neosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> self-survey-control enabled
ADVA-NE-1:gps-1-1-1-1--> self-survey-control disabled N 47 0 47.98 E 6 59 31.67 446.2

Related Commands
gnss-system-types
delay-type pdop-mask
delay-value pps-generation
cno-mask elevation-mask
installation-type sat-min1-threshold
show satellite-entries sat-min2-threshold
self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 632

Oscilloquartz: An ADVA Company Commands Reference

self-survey-period
Configure the Self Survey Period.

Security Level
Provisioning

Command Level
Configure GPS Port

Syntax
self-survey-period <self-survey-period>

The length of the Self Survey Period in seconds,

which is used to specify the number of position fixes
self-survey- that are to be averaged together to form the self-
period surveyed position.
Valid entry: 1 to 500000.

Guidelines
This command is used to set the length of the Self Survey Period in seconds. For
applications that require a high level of time accuracy, it is recommended to use a long
position survey time, such as one day (average of 86400 values).

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> self-survey-period 2000
ADVA-NE-1:gps-1-1-1-1--> show gps-port

Admin State : in-service

Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 633

Oscilloquartz: An ADVA Company Commands Reference

Self Survey Period : 2000

Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled
Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state installation-type
alias pdop-mask
gnss-system-types pps-generation
delay-type show gps-port
elevation-mask delay-value
cno-mask show satellite-entries
sat-min1-threshold sat-min2-threshold

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 634

Oscilloquartz: An ADVA Company Commands Reference

selection-mode
Change the SYNC or Time Clock Selection Mode.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
selection-mode <prio-mode|ql-mode>

Guidelines
This command changes the SYNC or Time Clock Selection Mode.

Examples
Example at the Configure Sync level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> selection-mode prio-mode
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : chassis
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Clock PLL Bw : eec
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

Example at the Configure Time Clock level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> selection-mode prio-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 635

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : none
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 636

Oscilloquartz: An ADVA Company Commands Reference

serial
Enable or Disable serial port access.

Security Level
Provisioning

Command Level
Configure System

Syntax
serial <control>

Enable or Disable serial port access.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable the Serial Interface on the NE. If enabled, the
serial port on the front of the NE can be used for accessing the Command Line Interface.

Examples
ADVA--> configure system
ADVA:system--> serial enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 637

Oscilloquartz: An ADVA Company Commands Reference

HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 638

Oscilloquartz: An ADVA Company Commands Reference

serial-disconnect-logoff
Enable or Disable automatic log off upon disconnection of a serial port session.

Security Level
Provisioning

Command Level
Configure System

Syntax
serial-disconnect-logoff [enabled | disabled]

Guidelines
This command is used to enable or disable automatic logoff when the serial port is
disconnected.

Examples
ADVA--> configure system
ADVA:system--> serial-disconnect-logoff enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 639

Oscilloquartz: An ADVA Company Commands Reference

SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

server-state
Enables or disables server for NTP clock.

Command Level
Configure NTP Clock

Syntax
server-state enabled|disabled

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> configure ntp-clock ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1-->
ADVA:ntp-NE-1:ntp_clock-1-1--> server-state enabled

Related Commands
add ntp-clock, mode, secure-mode, sym-key-authentication, time-reference-loss-handling

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 640

Oscilloquartz: An ADVA Company Commands Reference

set-threshold
Set the performance monitoring threshold value for the supplied interval / montype.

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure SOOC

Configure Static Remote Slave

Configure Syncjack

Syntax
set-threshold <montype> <threshold> <interval>

Set the threshold for this valid Monitor Type.

Valid entry: Valid Montype, where the values differ depending on
the command level.
For Clock Probes and PTP Clock Probes in the Configure Syncjack
montype command level, these values are valid: maxconstantte, maxte,
mtie10000s, mtie1000s, mtie100s, mtie10s, mtie1s, and
mtie50000s.
Note: For more information on the other valid values, see the
OSA 5422 Installation and Operations Manual.
The threshold setting for this PM.

Valid entry: Valid threshold values differ depending on the Monitor

Type selected.
threshold
For Clock Probes and PTP Clock Probes in the Configure Syncjack
command level, all the default threshold values are 0. For default
values associated with the other Monitor Types, see OSA 5422
Installation and Operations Manual.
The PM Interval for which to retrieve the current counts.
interval Valid entry: 15min or 5min (depending on configuration setup),
1day.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 641

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command sets the Performance Monitoring threshold value for an entity for the
supplied interval / montype. Threshold SNMP traps are generated if these thresholds are
exceeded. For valid entity identifiers, see Parameter Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock_probe-1-1--> pm
ADVA-NE-1:syncjack:clock_probe-1-1:pm--> set-threshold mtie10s 4 1day
ADVA-NE-1:syncjack:clock_probe-1-1:pm--> show threshold-data 1day
Interval Type : 1day
maxte : 0
maxconstantte : 0
mtie1s : 1
mtie10s : 4
mtie100s : 1
mtie1000s : 1
mtie10000s : 0
mtie50000s : 0

Example at the Configure Syncjack command level for a PTP clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> pm
ADVA-NE-1:syncjack:ptp_clock_probe-1-1:pm--> set-threshold maxte 1 1day
ADVA-NE-1:syncjack:ptp_clock_probe-1-1:pm--> show threshold-data 1day
Interval Type : 1day
maxte : 1
maxconstantte : 0
mtie1s : 0
mtie10s : 0
mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 642

Oscilloquartz: An ADVA Company Commands Reference

sftp
Enables or disables the Secure File Transfer Protocol (SFTP).

Command Level
Configure system

Syntax
sftp <control>

Enable or Disable SFTP.

control
Valid entry: enabled, disabled; Default is enabled.

Examples
ADVA--> configure system
ADVA:system--> sftp enabled
ADVA:system--> show system
System Name : OSA 5422
System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 643

Oscilloquartz: An ADVA Company Commands Reference

show 10mhz-port
Display the configuration of a 10 MHz port.

Command Level
Configure NTE

Configure 10 MHZ Port

Syntax
show 10mhz-port <10mhz-port-eid>
show 10mhz-port

10 MHZ port ID.

10mhz-port-eid Valid entry: clk-ne-shelf-nte-n, where: ne=1, shelf=1, nte=1 n=1-
2.Example: clk-1-1-1-1

Examples
Example at the Configure NTE level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> show 10mz-port clk-1-1-1-1
Admin State : unassigned
Operational State : outage
Secondary States : uas
Alias :
Signal Direction type : input
Squelch Control : never
Squelch QL : ql-none
Assumed QL :
Current QL :

Related Commands
admin-state signal-direction (pps-port)
alias squelch-ctrl
assumed-ql squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 644

Oscilloquartz: An ADVA Company Commands Reference

show access-port
Display the Access Port configuration.

Security Level
Retrieve

Command Level
Access Port PM

Configure Access Port

Configure NTE

Configure PTP Access Port

Configure PTP NTE

Syntax
show access-port
show access-port <access_port-eid>

Identifies the access port being displayed.

access_port-
eid Valid entry: access-ne-shelf-nte-n, Where: ne=1,
shelf=1, nte=1, n=1-2.Example: access-1-1-1-1

Guidelines
This command is used to display the Ethernet Access Port configuration parameters. The
Ethernet Access Port Facility represents the access port on a traffic carrying equipment. For
valid entry, see Parameter Rules / Valid entries .

Refer to Table 1 for Admin State, Operational State, Secondary States, OAM Admin State,
and OAM Discovery State response descriptions.

Examples
Example at the Configure Access Port level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> show access-port
Admin State : in-service
Operational State : outage

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 645

Oscilloquartz: An ADVA Company Commands Reference

Secondary States : act,faf

Alias :
MAC Address : 00:80:ea:2f:c0:72
MTU (bytes) : 9600
Max Port Speed : 0
Configured Port Speed : auto-1000-full
Negotiated Port Speed : negotiating
Media Type : fiber
MDIX Control : Not Applicable
MDIX Status : Not Applicable
SFP Vendor Name : ADVA
SFP Part Number : 0061003006
SFP Serial Number : FA01053102787
SFP Mfg Date : 2005-06-21
SFP Connector Type : lc
SFP Link Length (m) : 300
SFP Media Type : multi-mode
SFP Laser Wave Length (nm) : 850
Port Mode : co
Service Type : evpl
Rx Pause Enabled : disabled
Tx Pause Enabled : disabled
Acceptable Frame Policy : all-afp
Port VLAN ID : 1-0
QinQ Ethertype : N/A
QinQ Ethertype Override : disabled
Port Shaping Enabled : disabled
Port Shaped Speed : 0
Priority Map Mode : 802.1p
Drop Eligibility Indicator : enabled
N2A VLAN Trunking : enabled
A2N Push Port VID : disabled
N2A Pop Port VID : disabled
Loopback outer VLAN 1 : 4094-0
Loopback outer VLAN 1 Control : disabled
Loopback outer VLAN 2 : 4094-1
Loopback outer VLAN 2 Control : disabled
Loopback outer VLAN 3 : 4094-2
Loopback outer VLAN 3 Control : disabled
Loopback inner VLAN 1 : 4094-0
Loopback inner VLAN 1 Control : disabled
Loopback inner VLAN 2 : 4094-1
Loopback inner VLAN 2 Control : disabled
Loopback inner VLAN 3 : 4094-2
Loopback inner VLAN 3 Control : disabled
Loopback Type : none
Loopback Status : none
Loopback Timer : 10

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 646

Oscilloquartz: An ADVA Company Commands Reference

Swap SADA : none

Sync-E Mode : enabled
QL Mode : disabled
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-nsupp
Transmit QL : ql-nsupp
Auto Diagnostic : disabled

Example at the Configure PTP NTE level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> show access-port access-1-1-1-1
Admin State : in-service
Operational State : outage
Secondary States : act,faf
Alias :
Delay Asymmetry : 0

Related Commands
admin-state
show alarm-attributes
alias
mdix
show shelf-info
media
speed
port-shaping

show acl-entry
Display the configuration of this Access Control Entry.

Security Level
retrieve

Command Level
Access Control List

Syntax
show acl-entry

Guidelines
This command is used to retrieve the configuration of this specific Access Control entry. Up
to 100 access control entries can be configured. The entities are inherently created - and
can only be edited. This means that add and delete is not supported on this class.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 647

Oscilloquartz: An ADVA Company Commands Reference

Examples
To display an ACL entry:

ADVA--> configure system

ADVA:system--> acl-entry acl-1
ADVA:system:acl-1--> show acl-entry
Control : disabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.10
Network Mask : 255.255.255.0
IPv6 Address :
0000:0000:0000:0000:0000:0000:0000:0000
IPv6 Prefix Length : 64

Related Commands
admin-state
show audit-log
alias
show conditions
configure (acl)
show ne-conditions
list sys-resource
show system
show alarms

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 648

Oscilloquartz: An ADVA Company Commands Reference

show acl-list
Display all 100 Management Access Control List (ACL) entries.

Security Level
retrieve

Command Level
Configure System

Syntax
show acl-list

Guidelines
This command is used to retrieve all 100 management ACL entries, which allows you to limit
access to the NE (through DCN or management tunnels) to specific IP addresses or IP
address ranges (subnetworks). For example, this can be used to restrict the management,
PTP, and NTP connections that are accepted. Up to 100 entries can be made, and each entry
can be individually enabled or disabled. Enabled entries apply to all management interfaces.
The entries list displayed includes the IP addresses set to 0.0.0.0.

Examples
ADVA--> configure system
ADVA:system--> show acl-list
|ACL EID|IP Version |Network Address |Network Mask|IPv6 Address |IPv6 Prefix Length
|Filter |Control
|-------|-----------|-----------------|-----------------|--------------------------------
----------|--------------------|-------|---------|
|acl-1 |ipv4 |10.10.10.10 |255.255.255.0
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-2 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-3 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-4 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-5 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-6 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-7 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 649

Oscilloquartz: An ADVA Company Commands Reference

|acl-8 |ipv4 |0.0.0.0 |255.255.255.255

|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-9 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-10 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-11 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-12 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-13 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-14 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-15 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-16 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-17 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-18 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-19 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-20 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-21 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
--More--
|acl-97 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-98 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-99 |ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled
|acl-100|ipv4 |0.0.0.0 |255.255.255.255
|0000:0000:0000:0000:0000:0000:0000:0000 |64 |permit |disabled

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 650

Oscilloquartz: An ADVA Company Commands Reference

show active-ssl-certificate
Display the active SSL Certificate.

Security Level
Retrieve

Command Level
Configure User Security

Syntax
show active-ssl-certificate

Guidelines

This command is used to display the active SSL/X509 certificate.

Examples

ADVA--> configure user-security

ADVA:user-sec--> show active-ssl-certificate

Country : US
State : Texas
Local : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
SHA1 Finger Print :
19:F5:6D:D0:C5:7D:8A:B4:25:4F:02:69:75:10:D7:25:C0:49:5C:E7
MD5 Finger Print : DD:F3:6A:CD:6F:DD:CE:B6:E3:E1:C3:55:D2:7E:27:1E
Valid From : 2014-03-28,14:33:43
Valid Until : 2029-03-23,14:33:43

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 651

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 652

Oscilloquartz: An ADVA Company Commands Reference

show activity
Display scheduled Syncjack activity configured parameters.

Security Level
retrieve

Command Level
Configure Syncjack Schedule

Syntax
show activity <activity-eid>
show activity

Entity identifier of the activity.

activity-eid Valid entry: syncjack_schedule-1-1-1-n Where:n = 1
to 255.Example: syncjack_schedule-1-1-1-1

Guidelines
This command is used to display a Syncjack scheduled activity’s configured parameters.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure syncjack-schedule
ADVA-NE-1:syncjack:syncjack-schedule--> show activity syncjack_schedule-1-1-1-1
Activity ID : doctest
Schedule Type : one-shot
Start Time : 2014-01-24,23:12:28
Duration : 60
Interval : 0
Scheduled Entities : clock_probe-1-2

Related Commands
add activity
show activity
delete activity

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 653

Oscilloquartz: An ADVA Company Commands Reference

show alarm-attributes
Display the alarm severities setting associated with an entity type. You edit alarm attributes
at the configure system commands group, see Overview of the CLI Structure.

Command Level
Configure Access Port

Configure Slot

Configure Sync

Configure System

Syntax
show alarm-attributes <sys-eid>

or

show alarm-attributes
show alm-severities

Identifies the System Entity for which alarm attributes are being
sys-eid displayed.
Valid entry: access-port,, slot, sync, system.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show alarm-attributes
|Condition |Svc|Loc |Dir |Notif Code
|------------------------------|---|-----|-----|----------|
|frngsync |nsa|near |na |nr
|fstsync |nsa|near |na |nr
|hldovrsync |nsa|near |na |nr
|losloc |nsa|near |na |nr
|all-syncref |nsa|near |na |mj
|avg-hldovr-freq-not-ready |nsa|near |na |nr

Related Commands
show conditions

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 654

Oscilloquartz: An ADVA Company Commands Reference

show alarm-log
Display Alarm Log content.

Security Level
retrieve

Command Level
any

Syntax
show alarm-log

Guidelines
This command is used to retrieve the contents of the Alarm Log.

Examples
ADVA--> show alarm-log
2014-03-17 13:24:56::1:ALM:PSU-1-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:24:56::2:ALM:PSU-1-1-2:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:25:05::3:ALM:NETWORK PORT-1-1-1-1:CT=SFP -
Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY
2014-03-17 13:32:53::1:ALM:nteosa5422-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY
2014-03-17 13:32:54::2:ALM:PSU-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:32:54::3:ALM:PSU-2-1-2:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:32:53::1:ALM:nteosa5422-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=CL,SE=SA,DIR=RCVONLY
2014-03-17 13:33:03::4:ALM:NETWORK PORT-2-1-1-1:CT=SFP -
Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY
2014-03-17 13:45:41::1:ALM:nteosa5422-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY
2014-03-17 13:45:41::2:ALM:PSU-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:45:41::3:ALM:PSU-2-1-2:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 13:45:41::1:ALM:nteosa5422-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=CL,SE=SA,DIR=RCVONLY

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 655

Oscilloquartz: An ADVA Company Commands Reference

2014-03-17 13:45:53::4:ALM:NETWORK PORT-2-1-1-1:CT=SFP -

Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY
2014-03-17 14:22:00::1:ALM:PSU-2-1-1:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 14:22:00::2:ALM:PSU-2-1-2:CT=Equipment Provisioned But
Removed,LOC=NEAR,NC=MN,SE=NSA,DIR=RCVONLY
2014-03-17 14:22:12::3:ALM:NETWORK PORT-2-1-1-1:CT=SFP -
Removed,LOC=NEAR,NC=CR,SE=SA,DIR=RCVONLY

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 656

Oscilloquartz: An ADVA Company Commands Reference

show alarm-log-config
Display the System Alarm Log configuration.

Security Level
retrieve

Command Level
Alarm Log

Syntax
show alarm-log-config

Guidelines
This command is used to retrieve the configuration System Alarm Log.

Examples
ADVA--> configure system
ADVA:system--> alarm-log
ADVA:system:alm-log--> show alm-log-config

Syslog Storage : disabled

Log to File : enabled

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

show alarms
Display the list of all Active Alarms.

Security Level
retrieve

Command Level
any

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 657

Oscilloquartz: An ADVA Company Commands Reference

Syntax
show alarms

Guidelines
This command is used to retrieve the list of all Active Alarms against the system.

Examples
Example of displaying the list of alarms:
ADVA--> show alarms
|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|-----------------------|--------------------|-------|-----|------|---|-----------|
|psu-1-1-1 |eqpt-rmvd |nsa |near |rcv |mn |2014-03-
03,16:38:15
|psu-1-1-2 |eqpt-rmvd |nsa |near |rcv |mn |2014-03-
03,16:38:15
|network-1-1-1-1 |sfp-rmvd |sa |near |rcv |cr |2014-03-
03,16:38:27
|network-1-1-1-2 |sfp-rmvd |nsa |near |rcv |mn |2014-03-
15,10:43:05

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 658

Oscilloquartz: An ADVA Company Commands Reference

show all-communities
Display the list of SNMPv1 and SNMPv2c Community Entry instances.

Security Level
superuser

Command Level
Configure SNMP

Syntax
show all-community-entries

Guidelines
This command displays the list of SNMPv1 and SNMPv2c Community Entry instances.

Examples
ADVA--> configure snmp
ADVA:snmp--> show all-communities

|Community Name |Community Access

|----------------------------------------|------------------|
|checksnmpcli |readonly
|private |readwrite
|public |readonly

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 659

Oscilloquartz: An ADVA Company Commands Reference

show all-features
Displays the status for all license features.

Security Level
retrieve

Command Level
Admin Software License

Syntax
show all-features

Examples
ADVA--> admin sw-license
ADVA:sw-lic--> show all-features

|Feature Name |Enabled/Disabled

|----------------------------------------- |---------------|
|SyncJack-Extended-Scaled |disabled
|PTP-Clock-G-8275-1-and-IEEE-1588-2008-Annex-F-Profiles |enabled
|PTP-Enterprise-and-IEEE-1588-2008-L3-Multicast-Profiles|enabled
|PTP-MC-BC-IP-UNICAST-Profile-128-Remote-Slaves |enabled
|PTP-MC-BC-IP-UNICAST-Profile-256-Remote-Slaves |disabled
|PTP-MC-BC-IP-UNICAST-Profile-512-Remote-Slaves |disabled
|PTP-MC-BC-IP-UNICAST-Profile-1024-Remote-Slaves|disabled
|NTP-Server |disabled
|e-PRTC |enabled
|PTP-Clock-Power-and-Utility-Profiles...........|enabled
|Extended-Optical-ports.........................|disabled
|High-Accuracy-BC...............................|disabled

Related Commands
configure feature show feature

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 660

Oscilloquartz: An ADVA Company Commands Reference

show all-notify-entries
Display the list of notify entry instances.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show all-notify-entries

Guidelines
This command displays the list of notify entry instances.

Examples
ADVA--> configure snmp
ADVA:snmp--> show all-notify-enties

Notify Name : infoentry

Notify Type : inform
Notify Tag : info
=====================================
Notify Name : trapentry
Notify Type : trap
Notify Tag : trap
=====================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 661

Oscilloquartz: An ADVA Company Commands Reference

show all-slots
Display the list of equipment mounted in the ntesp-100 chassis.

Security Level
retrieve

Command Level
Network Element

Syntax
show all-slots

Guidelines
This command displays the list of equipment in the NE chassis.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show all-slots
Slot Type Slot Num Prov Card Type Phys Card Type
generic-slot 1 nteosa5422 OSA 5422

Related Commands
show ne-alarms show nte
show ne-conditions show shelf-info
show network-element show slot-info

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 662

Oscilloquartz: An ADVA Company Commands Reference

show all-target-addresses
Display the list of traphost target address entry instances.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show all-target-addresses

Guidelines
This command displays the list of traphost target address entry instances.

Example:
ADVA--> configure snmp
ADVA:snmp--> show all-target-addresses

Target Address Name : TA2

Transport Address : [2444:0000:0000:0000:0000:0000:0000:000B]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled
===========================================================
Target Address Name : ta_new
Transport Address : [2333:0000:000:0000:0000:0000:0000:000A]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled
===========================================================

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 663

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 664

Oscilloquartz: An ADVA Company Commands Reference

show all-target-params
Display the list of target parameter entry instances.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show all-target-params

Guidelines
This command displays the list of target parameter entry instances.

Examples
ADVA--> configure snmp
ADVA:snmp--> show all-target-params

Security Model : snmpv2c

Security Name : TestOne
Target Params Name : GoForIt
Security Level : no-auth
===========================================
Security Model : snmpv1
Security Name : private
Target Params Name : ShowTime
Security Level : no-auth
===========================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 665

Oscilloquartz: An ADVA Company Commands Reference

show all-users
Displays a list of all users.

Security Level
superuser

Command Level
Configure User Security

Syntax
show all-users

Guidelines
This command displays a list of all users.

Examples
ADVA--> configure user-security
ADVA:user-sec--> show all-users

Local Users:
============
| UserName | Privilege
------------------------------------------------
| netadmin | provisioning
| root | superuser
| user | maintenance

Remote Users:
=============
| UserName | Privilege
----------------------------------------------------

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 666

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 667

Oscilloquartz: An ADVA Company Commands Reference

show all-usm-users
Display all usm users.

Security Level
superuser

Command Level
Configure SNMP

Syntax
show all-usm-users

Guidelines
This command displays all of the usm users.

Examples
ADVA--> configure snmp
ADVA:snmp--> show all-usm-users
User Name : ADMIN
User Security Name : ADMIN
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
=======================================================
User Name : MONITOR
User Security Name : MONITOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
=======================================================
User Name : OPERATOR
User Security Name : OPERATOR
User Security Level : no-auth
User Auth Protocol : no-auth-protocol
User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
=======================================================
User Name : PROVISION
User Security Name : PROVISION
User Security Level : no-auth

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 668

Oscilloquartz: An ADVA Company Commands Reference

User Auth Protocol : no-auth-protocol

User Privacy Protocol : no-priv-protocol
User Auth Key : *****
User Access Type : readwrite
User Engine ID : 0x800009f0030100ea02a520
User Privacy Key : *****
=======================================================

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 669

Oscilloquartz: An ADVA Company Commands Reference

show arp-entries
Display entries in the ARP cache table and the Proxy ARP settings for the system.

Security Level
retrieve

Command Level
Any

Syntax
show arp-entries

Guidelines
This command displays all of the entries in the ARP cache table and the Proxy ARP settings
for the system.

Examples
ADVA--> configure communication
ADVA:comms--> show arp-entries
|MAC Address |IP Address |Interface |Type
|-------------------|----------------|------------|-----|
|12:23:34:45:56:67 |10.10.10.10 |eth0 |static
|c0:91:34:d7:9f:00 |10.12.8.1 |eth0 |dynamic
|00:0c:29:4a:f8:aa |10.12.15.254 |eth0 |dynamic

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 670

Oscilloquartz: An ADVA Company Commands Reference

show audit-log
Display audit Log content. This command also displays the time the activation timer and
validation timer is due to expire.

Command Level
any

Syntax
show audit-log

Examples
ADVA:upgrade--> show audit-log
2014-01-20 09:25:16:root:242:DBCH:SECURITY SYSTEM:ACCESSORDER=LOCAL
2014-01-20 11:13:51:root:7:EVT:Software copy from server requested
2014-01-20 11:15:34::33:EVT:Software download completed
2014-01-20 11:15:43:root:8:EVT:Software install requested
2014-01-20 11:17:42::35:EVT:Software install completed
2014-01-20 12:23:19:root:9:EVT:Database backup requested
2014-01-20 12:23:33:root:10:EVT:Database copy to server requested
2014-01-20 12:23:53::37:EVT:Database Transfer completed
2014-01-20 12:23:53::11:EVT::Software Activate timer set
2014-01-20 12:23:53::12:EVT:2014-01-20 13:23:Software Validate timer set
2014-01-20 12:23:54::13:EVT::Software Activate timer set
2014-01-20 12:23:53:root:14:EVT:Software upgrade requested
2014-01-20 12:25:12::1:EVT::Software Validate timer set
2014-01-20 12:25:15::1:STCHG:CCSCU-1-1-1:OPER:Normal,SEC:ACT
2014-01-20 12:25:15::2:STCHG:SYNC-1-1-1-1:OPER:Normal,SEC:ACT
2014-01-20 12:25:15::3:STCHG:nteosa5422-1-1-1:OPER:Normal,SEC:ACT
2014-01-20 12:25:15::4:STCHG:ACCESS PORT-1-1-1-1:OPER:Normal,SEC:ACT

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 671

Oscilloquartz: An ADVA Company Commands Reference

show audit-log-config
Display the System Audit Log configuration.

Security Level
retrieve

Command Level
Audit Log

Syntax
show audit-log-config

Guidelines
This command is used to retrieve the configuration System Audit Log.

Examples
To display System Audit log events:

ADVA--> configure system

ADVA:system--> audit-log
ADVA:system:audit-log--> show audit-log-config

Syslog Storage : disabled

Log to File : enabled

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 672

Oscilloquartz: An ADVA Company Commands Reference

show bits-in
Display the configuration parameters for Bits-In port.

Command Level
Configure BITS In

Configure NTE

Syntax
show bits-in <bits-in-port-eid>
show bits-in

The eid of the BITS In Port.

bits-in-port-eid Valid entry: bits_in-ne-shelf-nte-bits, where: ne=1, shelf=1, nte=1,
bits=1-2.Example: bits_in-1-1-1-1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> show bits-in bits_in-1-1-1-1
Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-nsupp

Related Commands
line-code
admin-state
ql-mode
alias
sa-bit
assumed-ql
show alarm-attributes
bits-line-type
show bits-in
expected-ql
show bits-out
frame-format (bits)
squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 673

Oscilloquartz: An ADVA Company Commands Reference

show bits-out
Display the configuration parameters for this Bits-Out port.

Command Level
Configure BITS Out

Configure NTE

Syntax
show bits-out <bits-out-port-eid>
show bits-out

The eid of the BITS Out Port.

bits-out-port-
eid Valid entry: bits_out-ne-shelf-nteaux-bits, here: ne=1, shelf=1,
nte=1, bits=1-2.Example: bits_out-1-1-1-1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:teosa5422-1-1-1--> show bits-out bits_out-1-1-1-1
Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-dnu
Line Build Out : none

Related Commands
line-code
admin-state
ql-mode
alias
sa-bit
assumed-ql
show alarm-attributes
bits-line-type
show bits-in
expected-ql
show bits-out
frame-format (bits)
squelch-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 674

Oscilloquartz: An ADVA Company Commands Reference

show bitsx8_group
Display the configuration parameters for this bitsx8 group. For valid entity identifiers, see
Equipment / Entity IDs .

Security Level
Retrieve

Command Level
Configure bitsx8 Line Card

Configure bitsx8_group

Syntax
show bitsx8_group <bitsx8_group-eid>
show bitsx8_group

The entity identifier of the bitsx8 Group.

bitsx8_group-eid
Valid entry: bitsx8_group-ne-shelf-nte-slot-group, Where: ne=1,
shelf=1, slot=2-3, group=1-2. Example: 8xbits_group-1-1-2-1

Examples
Example at the Configure bitsx8 Line Card command level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure bits-x16 bits_x16-1-1-2
ADVA-NE-1:bits_x16-1-1-2--> show bitsx8_group bitsx8_group-1-1-1-2-1
Alias :
Admin State : in-service
Operational State : outage
Secondary State : act,sgeo
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-nsupp
Line Build Out : none
Line Impedance : 120-ohm
Active Ports : enabled,enabled,enabled,enabled,enabled,enabled,enabled,enabled

Example at the Configure bitsx8 Line Group command level:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 675

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> network-element ne-1

ADVA-NE-1--> configure bits-x16 bits_x16-1-1-2
ADVA-NE-1:bits_x16-1-1-2--> configure bitsx8_group bitsx8_group-1-1-1-2-1
ADVA-NE-1:bitsx8_group-1-1-2-1--> show bitsx8_group
Alias :
Admin State : in-service
Operational State : outage
Secondary State : act,sgeo
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-none
Transmit QL : ql-nsupp
Line Build Out : none
Line Impedance : 120-ohm

Related Commands
admin-state
bits-line-type
alias
show <linecardtype>
bits-line-impedance

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 676

Oscilloquartz: An ADVA Company Commands Reference

show boundary-clock
Display the configuration of a Precision Time Protocol Clock Boundary Clock (PTP BC).

Security Level
retrieve

Command Level
Configure PTP Network Element

Configure PTP Boundary Clock

Syntax
show boundary-clock
show boundary-clock <bc-eid>

The Entity Identifier of the Boundary Clock to be

bc-eid created.
Valid entry: ptp_bc-1-n,where n=1

Guidelines
This command is used to display the configuration of a Precision Time Protocol Clock
Boundary Clock (PTP BC).

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show boundary-clock ptp_bc-1-1

Alias : Fitsimmons
Admin State : in-service
Operational State : normal
Secondary States : act
Ptp Domain Number : 4
Timing Source : ts-1-1
Clock Identity : 0080ea33b0a00001

Related Commands
add boundary-clock
delete boundary-clock
admin-state

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 677

Oscilloquartz: An ADVA Company Commands Reference

show clkx16_group
Display the configuration parameters for this clkx16 line card group.

Command Level
Configure clkx16 Line Card

Configure clkx16_group

Syntax
show clkx16_group <clkx16_group-eid>
show clkx16_group

The entity identifier of the clkx16 Group.

clkx16_group-eid
Valid entry: clkx16_group-ne-shelf-nte-slot-group, Where: ne=1,
shelf=1, slot=2-3, group=1. Example: clkx16_group-1-1-1

Examples
Example at the Configure clkx16 Line Card command level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure clk-x16 clk_x16-1-1-1
ADVA-NE-1:clk_x16-1-1-1--> show clkx16_group clkx16_group-1-1-1
Alias :
Admin State : management
Operational State : outage
Secondary State : act,sgeo,faf
Signal Direction type : output
Squelch Control : lock
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1

Example at the Configure clkx16 Line Group command level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure clk-x16 clk_x16-1-1-1
ADVA-NE-1:clk_x16-1-1-1--> configure clkx16_group clkx16_group-1-1-1
ADVA-NE-1:clkx16_group-1-1-1--> show clkx16_group
Alias :
Admin State : in-service
Operational State : outage
Secondary State : act,sgeo
Signal Direction type : output
Squelch Control : never
Squelch QL : ql-none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 678

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state
show <linecardtype>
alias

show clk-x4-port-group
Displays the settings of the clk-x4-lpn clock group.

Command Level
Configure clk-x4-lpn

Configure clk-x4-port-group

Syntax
show clk-x4-port-group <clkx4_group-eid>
show clk-x4-port-group

The entity identifier of the clkx4 group.

clkx4_group-eid
Valid values: clkx4_group-ne-shelf-slot-group, where: ne=1,
shelf=1, slot=1-2, group=1.
Example: clkx4_group-1-1-2-1.

Example

ADVA--> network-element ne-1

ADVA-NE-1--> configure clk-x4-lpn clk_x4_lpn-1-1-2
ADVA-NE-1:clk_x4_lpn-1-1-2--> show clk-x4-port-group clkx4_group-1-1-2-1

-or-

ADVA--> network-element ne-1

ADVA-NE-1--> configure clk-x4-lpn clk_x4_lpn-1-1-2
ADVA-NE-1:clk_x4_lpn-1-1-2--> configure clk-x4-port-group clkx4_group-1-1-2-1
ADVA-NE-1:clkx4_group-1-1-2-1--> show clk-x4-port-group
Admin State : management
Operational State : outage
Secondary States : act,mea
Card Type : clk-x4-lpn
Alias : MyAlias
Physical Entity Name :
Hardware Revision :
USI :
CLEI Code :
Part Number : -01
Manufacturer Date : 1970-01-01

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 679

Oscilloquartz: An ADVA Company Commands Reference

Manufacturer Site :
Temperature (deg C) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 680

Oscilloquartz: An ADVA Company Commands Reference

show clock-probe
Display the configuration parameters for a Syncjack clock probe.

Security Level
retrieve

Command Level
Configure Syncjack

Syntax
show clock-probe <probe-eid>

Clock Probe EID

clock-probe-
eid Valid entry: clock_probe-1-n; where, n=1-2Example:
clock_probe-1-1

Guidelines
This command displays the configuration parameters a Syncjack probe.

Examples
Example for a clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-1
Name : clkprobe1
Current State : completed
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : ts-1-1
Source Type : phase
Measurement Rate, (measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -4
Time of last TIE Result : 2014-10-30,21:32:41
Actual Test Start Time : 2014-10-30,21:25:20
Actual Test Duration, (s) : 59

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 681

Oscilloquartz: An ADVA Company Commands Reference

Scheduler Eid : syncjack_schedule-1-1-1-1

Running Failed Count : 0
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | 12 | OK | OK |
| 2.0s | 16 | OK | OK |
| 5.0s | 16 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 20 | OK | OK |
| 50.0s | 24 | OK | OK |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
mtie-mask-margin
add clock-probe
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 682

Oscilloquartz: An ADVA Company Commands Reference

show community
Display the Community Entry for the specified Community Name.

Security Level
superuser

Command Level
Configure SNMP

Syntax
show community <name>

A character string representing a valid SNMP

name Community Name.
Valid entry: Character string - up to 64 characters

Guidelines
This command displays the Community Entry for the specified Community Name.

Guidelines
ADVA--> configure snmp
ADVA:snmp--> show community GetUpAndGo

Community Name : GetUpAndGo

Community Access : readwrite

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 683

Oscilloquartz: An ADVA Company Commands Reference

show conditions
Retrieve the list of Active Conditions that are currently raised against the system.

Security Level
retrieve

Command Level
any

Syntax
show conditions

Guidelines
This command is used to retrieve the list of Active Conditions that are currently raised
against the entity.

Examples
ADVA--> show conditions
|Entity Id |ConditionType |Svc|Loc |Dir |NC |TimeStamp
|--------------------------|-------------------------|---|-----|-----|---|---------------
---|
|network-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-01-
12,18:33:10
|psu-1-1-1 |rem-ccm |sa |near |rcv |mn |2014-01-
12,18:32:56
|psu-1-1-2 |err-ccm |sa |near |rcv |mn |2014-01-
12,18:33:00
|sync-1-1-1-1 |frngsync |nsa|near |na |nr |2014-01-
12,18:32:57

Related Commands
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
test-alarm
show audit-log

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 684

Oscilloquartz: An ADVA Company Commands Reference

show configfile
Displays contents of a config file.

Security Level
retrieve

Command Level
Admin Config-file

Syntax
show configfile <filename>

A character string representing a valid configfile

filename name.
Valid entry: Valid File Name

Guidelines
This command is used to display the contents of a config file. Information about editing
config files and their uses is described in admin config-file Commands.

Examples
ADVA--> list
ADVA--> admin config-file
ADVA:config-file--> show configfile configfile_1
#
#CLI: SUBNETWORK
#
home
prompt "ADVA"
#
#CLI: SYSTEM
#
home
configure system
auth-traps disabled
serial enabled
http enabled
telnet enabled
scp enabled
ftp enabled
autoprov-mode autoprov

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 685

Oscilloquartz: An ADVA Company Commands Reference

security-banner "This is a private system. Unauthorized access or use may lead to

prosecution."
ssh enabled
#
#CLI: SYSTEM AUDIT LOG
#
home
configure system
audit-log
syslog-control disabled
log2file-control disabled
#
#CLI: SYSLOG SERVER-1
#
home

configure system
syslog-server 1
config 0.0.0.0 514
#
#CLI: SYSLOG SERVER-2
#
home
configure system
syslog-server 2
config 0.0.0.0 514
#
#CLI: SYSLOG SERVER-3
#
home
configure system
syslog-server 3
config 0.0.0.0 514
#
#CLI: SYSTEM SECURITY LOG
#
home
configure system
security-log
syslog-control enabled

output truncated

#end
home
admin config-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 686

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 687

Oscilloquartz: An ADVA Company Commands Reference

show configfile-status
Display status of a config file.

Security Level
retrieve

Command Level
Any

Syntax
show configfile-status <filename>

A character string representing a valid configfile

filename name.
Valid entry: Valid File Name

Guidelines
This command is used to display status information related to the designated config file.
The primary purpose of displaying config file status to ascertain the status of a transfer-file
command to copy a config file to or from a remote server.

Examples
ADVA--> admin config-file
ADVA:config-file--> show configfile-status

Configuration File Action : save

Configuration File Status : completed
Configuration File Error Information :

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 688

Oscilloquartz: An ADVA Company Commands Reference

show curr-data
Display the current Performance Monitoring data for an entity for the supplied interval /
bin-index.

Security Level
retrieve

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure SOOC

Configure Static Remote Slave

Configure Syncjack

Syntax
show curr-data <interval>

The PM Interval for which to retrieve the current

counts.
interval
Valid entry: 15min, 1day or 5min, 1day (depending
on the PM-Interval setting at NTE)

Guidelines
This command displays the current Performance Monitoring data for an entity for the
supplied interval. For valid entry, see Parameter Rules / Valid entries.

Examples
Example at the Configure Access Port command level:

ADVA--> network-element ne-1

ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> pm
ADVA-NE-1:access-1-1-1-1--> show curr-data 15min

Interval Type : 15min

Timestamp : 2016-11-07,20:01:24

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 689

Oscilloquartz: An ADVA Company Commands Reference

Valid Flag : disabled

abrrx : 0
abrtx : 0
apfd : 0
aufd : 0
esbf : 0
esbp : 0
esbs : 0
esc : 0
escae : 0
esde : 0
esf : 0
esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 0
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 0
l2cpfd : 0
l2cpfp : 0
uas : 0

Example at the Configure Syncjack command level for a clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock_probe-1-1--> pm
ADVA-NE-1:syncjack:clock_probe-1-1:pm--> show curr-data 1day

Interval Type : 1day

Timestamp : 2018-01-09,16:27:32
Valid Flag : disabled
maxte : 0
maxconstantte : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 690

Oscilloquartz: An ADVA Company Commands Reference

mtie1s : 0
mtie10s : 0
mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Example at the Configure Syncjack command level for a PTP clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> pm
ADVA-NE-1:syncjack:ptp_clock_probe-1-1:pm--> show curr-data 1day

Interval Type : 1day

Timestamp : 2018-01-03,13:54:44
Valid Flag : disabled
maxte : 0
maxconstantte : 0
mtie1s : 0
mtie10s : 0
mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 691

Oscilloquartz: An ADVA Company Commands Reference

show db-version
Display the Active/Standby Database versions.

Security Level
retrieve

Command Level
Admin Database

Syntax
show db-version [active | standby]

Guidelines
This command is used to retrieve the Active/Standby Release versions.

Examples
To display the Active/Standby Release versions:
ADVA--> admin database
ADVA:database--> show db-version active
Database Type : active
Database Version : 03.00
ADVA:database--> show db-version standby
Database Type : standby
Database Version : 03.00

Related Commands
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 692

Oscilloquartz: An ADVA Company Commands Reference

show dcn
Display the settings for the NTE DCN.

Command Level
Configure DCN

Syntax
show dcn

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure dcn dcn-1-1-1-1
ADVA-NE-1:dcn-1-1-1-1--> show dcn
Admin State : in-service
Operational State : normal
Secondary States : act
Alias :
MAC Address : 00:80:ea:2f:c0:70
MTU (bytes) : 1500
Media Type : copper
Max Port Speed : 100000000
Configured Port Speed : auto
Negotiated Port Speed : auto-100-full
MDIX Control : auto
MDIX Status : uncrossed

Related Commands
admin-state show access-port
alias show alarm-attributes
media show dcn
mdix show sfp-info
port-shaping speed

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 693

Oscilloquartz: An ADVA Company Commands Reference

show diag-file
Displays a diagnostic file name.

Security Level
retrieve

Command Level
Admin Diagnostics

Syntax
show diag-file

Guidelines
This command is used to display diagnostic file name.

Examples
ADVA--> admin diagnostics
ADVA:diagnostics--> save diag-file
ADVA:diagnostics--> show diag-file

Diag File : 2014-02-24,13:40:01

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

show display-card
Displays the display-card settings.

Command Level
Configure display-card

Syntax
show display-card

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure display-card display_card-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 694

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:display_card-1-1-1--> show display-card

Admin State : management
Operational State : outage
Secondary States : act,ueq
Card Type : display-card
Alias : NewAlias
Physical Entity Name : DISPLAY-1-1-1
Hardware Revision : 01.01
USI : LBADVA9Y1234567
CLEI Code :
Part Number : 4074124001
Manufacturer Date : 1970-01-01
Manufacturer Site :
Temperature (deg C) : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 695

Oscilloquartz: An ADVA Company Commands Reference

show dynamic-remote-slave
Display Dynamic Remote Slave configuration.

Security Level
retrieve

Command Level
Configure Master Clock Interface

Configure Dynamic Remote Slave

Syntax
show dynamic-remote-slave <ds-eid>

The entity identifier of the Dynamic Remote Slave.

ds-eid Valid entry: dynamic_slave-ne-bc-mci-n; where:
ne=1, bc/mc=1, mci=1, n=up to 1024.

Guidelines
This command is used to display the Dynamic Remote Slave configuration.

Examples
Example at the Configure Master Clock Interface level for an IPv4 address:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show dynamic-remote-slave dynamic_
slave-1-1-1-1
Alias :
Admin State : management
Operational State : normal
Secondary States : act
Time Created : 2017-07-30,07:55:59
Negotiated Announce Lease Duration : 300
Lease Duration Remain Time : 91
Negotiated Delay Resp Lease Duration : 300
Delay Resp Duration Remain Time : 91
Negotiated Sync Lease Duration : 300
Sync Duration Remain Time : 91
Clock Identity : 0080eafffe7f44500001

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 696

Oscilloquartz: An ADVA Company Commands Reference

Unicast Msg Negotiation : enabled

Slave V4 Address : 22.22.22.2
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 32-pkt-per-sec
Sync Msg Rate : 32-pkt-per-sec

Example at the Configure Dynamic Remote Slave level for an IPv4:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> configure dynamic-remote-slave
dynamic_slave-1-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1:dynamic_slave-1-1-1-1--> show dynamic-
remote-slave
Alias :
Admin State : management
Operational State : normal
Secondary States : act
Time Created : 2017-07-30,07:55:59
Negotiated Announce Lease Duration : 300
Lease Duration Remain Time : 91
Negotiated Delay Resp Lease Duration : 300
Delay Resp Duration Remain Time : 91
Negotiated Sync Lease Duration : 300
Sync Duration Remain Time : 91
Clock Identity : 0080eafffe7f44500001
Unicast Msg Negotiation : enabled
Slave V4 Address : 22.22.22.2
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 32-pkt-per-sec
Sync Msg Rate : 32-pkt-per-sec

Example at the Configure Dynamic Remote Slave level for an IPv6:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-5
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> configure dynamic-remote-slave
dynamic_slave-1-1-5-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-5:dynamic_slave-1-1-5-1-->
show dynamic-remote-slave

Alias :

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 697

Oscilloquartz: An ADVA Company Commands Reference

Admin State : management

Operational State : normal
Secondary States : act
Time Created : 2017-07-13,16:10:43
Negotiated Announce Lease Duration : 300
Lease Duration Remain Time : 105
Negotiated Delay Resp Lease Duration : 300
Delay Resp Duration Remain Time : 105
Negotiated Sync Lease Duration : 300
Sync Duration Remain Time : 105
Clock Identity : 0080eafffe4ddc900001
Unicast Msg Negotiation : enabled
Slave V4 Address : Not Available
Slave V6 Address : 2000:0000:0000:0000:0000:0000:0000:0003
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 16-pkt-per-sec
Sync Msg Rate : 16-pkt-per-sec

Related Commands
admin-state alias
delete dynamic-remote-slave show static-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 698

Oscilloquartz: An ADVA Company Commands Reference

show eth0
Displays the configuration of this IPv4/IPv6 Management LAN Interface.

Security Level
retrieve

Command Level
Configure Communications

Syntax
show eth0

Guidelines
Displays the configuration of this IPv4/IPv6 Management LAN Interface.

This IPv6 attributes are only displayed, when the ip-mode is

set to ipv4-and-ipv6. Otherwise, only the IPv4 attributes
are displayed.

Examples
Example of an IPv4 interface:

ADVA--> configure communication

ADVA:comms--> show eth0
Name : eth0
IP Mode : ipv4-only
IP Address : 10.12.8.139
Netmask : 255.255.248.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : 00:80:ea:84:28:e0
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:2f:c0:70
System Default Gateway : 10.12.8.1

Example of an IPv4 and IPv6 interface:

ADVA--> configure communication

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 699

Oscilloquartz: An ADVA Company Commands Reference

ADVA:comms--> show eth0

Name : eth0
IP Mode : ipv4-and-ipv6
IP Address : 192.168.179.216
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:7c:4c:90
System Default Gateway : 10.12.8.1
IPv6 Address : FDAA:0000:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 64
DHCPv6 Role : dhcp-client
DHCPv6 : disabled
RIP-NG : disabled
IPv6 RA Prefix Control : disabled
IPv6 RA Prefix : 0000:0000:0000:0000:0000:0000:0000:0000
IPv6 RA Prefix Length : 0
IPv6 Stateless Address Auto Configuration : disabled
IPv6 Link Local Address : FE80:0000:0000:0000:0280:EAFF:FE7C:4C90
IPv6 Link Local Address Prefix Length : 64
IPv6 System Default Gateway : FDAA:0000:0000:0000:0000:0000:0000:0001

Related Commands
dhcpv6-control
add arp-entry show ip-interface eth0
flush-arp-cache
add ip-route show ip-routes
flush-ndp-cache
add ipv6-route show ipv6-routes
ip-mode
add mgmttnl show mgmttnl
ipv6-unicast-addr
add ndp-entry show ndp-entries
ipv6-sys-def-gateway
configure src-addr show ping-result
list mgmttnl
delete arp-entry show src-addr
ping
delete ip-route show trace-route-
ping6
delete ipv6-route result
prefix-length
delete mgmttnl trace-route
rip-ng-control
delete ndp-entry trace-route6
show arp-entries

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 700

Oscilloquartz: An ADVA Company Commands Reference

show feature
Displays the enable or disable status for the specified license.

Security Level
retrieve

Command Level
Admin Software License

Syntax
show feature <feature>

The feature to be displayed.

Valid entry: PTP-MC-BC-IP-UNICAST-Profile-<number of remote
slaves>-Remote-Slaves, PTP-Clock-G-8275-1-and-IEEE-1588-2008-
feature Annex-F-Profiles, PTP-Enterprise-and-IEEE-1588-2008-L3-Multicast-
Profiles, SyncJack-Extended-Scaled, e-PRTC, NTP-Server,
PTP-Clock-Power-and-Utility-Profiles, Extended-Optical-ports,
High-Accuracy-BC.

Examples
ADVA--> admin sw-license
ADVA:sw-lic--> show feature SyncJack-Extended-Scaled
Enabled/Disabled : enabled

Related Commands
configure feature show all-features

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 701

Oscilloquartz: An ADVA Company Commands Reference

show file-services-status
Display file transfer and system upgrade status. Available at all hierarchy levels.

Security Level
retrieve

Command Level
any

Syntax
show file-services-status

Guidelines
This command is used to retrieve the System upgrade status.

Examples
To display System upgrade status:

ADVA--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

Related Commands
For Software Upgrade:
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

For Database:
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 702

Oscilloquartz: An ADVA Company Commands Reference

show gps-port
Display the configuration of the GPS port.

Security Level
Retrieve

Command Level
Configure NTE

Configure GPS Port

Syntax
show gps-port <gps-eid>
show gps-port

GPS port ID.

gps-eid Valid entry: gps-ne-shelf-nte-n, where: ne=1, shelf=1, nte=1,
n=1.Example: gps-1-1-1-1

Guidelines
This command is used to display the configuration of a GPS port.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> show gps-port gps-1-1-1-1
Admin State : in-service
Operational State : normal
Alias :
PPS Gen Condition : 3sats
Antenna Delay Value : 5
Antenna Delay Option : meters
GNSS System Types : gps
Installation Type : full-sky-view
C/No Mask : 35
Elevation Mask : 20
PDOP Mask : 8
PDOP : Not Available
Self Survey Period : 2000
Sat Min1 Threshold : 3
Sat Min2 Threshold : 2
PPS Generated : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 703

Oscilloquartz: An ADVA Company Commands Reference

Satellites Number : 12
Satellites Usable : enabled
Self Survey Progress, (%) : 100
Antenna Status : normal
GNSS TOD : 2017-07-09,05:45:37
..........Self-Survey Control : enabled
Coordinate Latitude : N32:11:32.142
Coordinate Longitude : E34:53:5.454
Coordinate Altitude : 100

Related Commands
admin-state gnss-system-types
alias pdop-mask
delay-type pps-generation
delay-value elevation-mask
cno-mask sat-min1-threshold
installation-type sat-min2-threshold
show satellite-entries self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 704

Oscilloquartz: An ADVA Company Commands Reference

show history-data
Display the history Performance Monitoring data for an entity for the supplied interval /
bin-index.

Security Level
retrieve

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure SOOC

Configure Static Remote Slave

Configure Syncjack

Syntax
show history-data <interval> <bin-index>

The PM Interval for which to retrieve the current

counts.
interval
Valid entry: 15min, 1day or 5min, 1day (depending
on the PM-Interval setting at NTE)
The History Bin Index to retrieve.
bin-index Valid entry: 15min:1-32 (1 being the most recent and
32 being the oldest), 1day:1 only

Guidelines
This command displays the current Performance Monitoring data for an entity for the
supplied interval / bin-index. For valid entry, see Parameter Rules / Valid entries.

Examples
Example at the Configure Syncjack command level for a clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 705

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:syncjack:clock_probe-1-1--> pm
ADVA-NE-1:syncjack:clock_probe-1-1:pm--> show history-data 1day 1

Interval Type : 1day

Timestamp : 1970-01-05,00:00:00
Valid Flag : enabled
maxte : 50
maxconstantte : 60
mtie1s : 100
mtie10s : 0
mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Example at the Configure Syncjack command level for a PTP clock probe:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> pm
ADVA-NE-1:syncjack:ptp_clock_probe-1-1:pm--> show history-data 5min 1

Interval Type : 5min

Timestamp : 1970-01-01,23:00:00
Valid Flag : enabled
maxte : 5
maxconstantte : 0
mtie1s : 0
mtie10s : 5
mtie100s : 9
mtie1000s : 23
mtie10000s : 31
mtie50000s : 31

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 706

Oscilloquartz: An ADVA Company Commands Reference

show history-result
Display a TIE history result for a Syncjack clock probe.

Security Level
retrieve

Command Level
Configure Clock Accuracy

Configure Clock Analysis

Syntax
show history-result <clock_probe_result-eid>
show history-result <ptp-clock_probe_result-eid>

Syncjack Clock Probe EID

Valid entry for Clock Accuracy: clock_probe_result-1-
clock_probe_ n-mWhere:n = 1 (if SyncJack-extended-scaled
result-eid feature is disabled) or 1-2 (if SyncJack-extended-
scaled is enabled)m = 1 to 16Example: clock_probe_
result-1-1-1
Syncjack PTP Clock Probe EID
ptp-clock_
probe_ Valid entry for Clock Analysis:
result-eid ptp_clock_probe-result-1-n-m Where: n = 1 to 2m =
1 to 16Example: clock_probe_result-1-1-1

Guidelines
This command displays the TIE history results of a Syncjack probe.

Examples
Example for Clock Accuracy:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> show history-result clock_probe_result-1-1-1
Alias : clkprobe1
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 707

Oscilloquartz: An ADVA Company Commands Reference

Expected QL : ql-none
Source Eid : ts-1-1
Source Type : phase
Measurement Rate, (measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Actual Test Start Time : 2014-10-30,21:25:20
Actual Test Duration, (s) : 59
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | 12 | OK | OK |
| 2.0s | 16 | OK | OK |
| 5.0s | 16 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 20 | OK | OK |
| 50.0s | 24 | OK | OK |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Example for Clock Analysis:

ADVA--> network-element ne-1

ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> show history-result ptp_clock_probe_result-1-1-1
Alias : PTPClkProbe01
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Slave Ip Address : 192.168.106.5
Master Ip Address : 192.168.106.1
Direction : slave-to-master
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Actual Test Start Time : 2014-08-28,19:44:30
Actual Test Duration, (s) : 199
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 708

Oscilloquartz: An ADVA Company Commands Reference

| 1.0s | N/A | N/A | N/A |

| 2.0s | N/A | N/A | N/A |
| 5.0s | 8 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 18 | OK | OK |
| 50.0s | 34 | OK | OK |
| 100.0s | 39 | OK | OK |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add clock-probe ip-version
add ptp-clock-probe master-ip-address
delete clock-probe mtie-mask-margin
delete ptp-clock-probe mtie-mask-type
delete history-result mtie-restart
show clock-probe name (ne, probe)
show ptp-clock-probe ptp-flowpoint
show syncjack-telecom-slave reference, reference-eid
show history-result slave-ipv4-address
direction source-eid
expected-ql source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 709

Oscilloquartz: An ADVA Company Commands Reference

show icmpv4
View the ICMPv4 configuration.

Security Level
retrieve

Command Level
Configure System

Syntax
show icmpv4

Guidelines
This command is used to view the ICMPv4 configuration.

Examples
Example of displaying the ICMPv4 configuration:

ADVA--> configure system

ADVA:system--> show icmpv4

ICMPv4 Filter : enabled

Drop Echo Requests : disabled

Related Commands
drop-echo-requests show icmpv6
icmpv4-filter show icmpv6

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 710

Oscilloquartz: An ADVA Company Commands Reference

show icmpv6
View the ICMPv6 configuration.

Security Level
retrieve

Command Level
Configure System

Syntax
show icmpv6

Guidelines
This command is used to view the ICMPv6 configuration.

Examples
Example of displaying the ICMPv6 configuration:

ADVA--> configure system

ADVA:system--> show icmpv6

ICMPv6 Filter : enabled

Drop Echo Requests : disabled
Drop Router Solicitations : disabled
Drop Router Advertisement : disabled
Drop Neighbor Advertisement : disabled
Drop Neighbor Solicitations : disabled

Related Commands
drop-echo-requests drop-router-solicitation
drop-neighbor-advertisement icmpv4-filter
drop-neighbor-solicitation icmpv6-filter
drop-router-advertisement show icmpv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 711

Oscilloquartz: An ADVA Company Commands Reference

show ip-interface eth0

Display the configuration of this IPv4 Interface.

Security Level
retrieve

Command Level
Any

Syntax
show ip-interface eth0

Guidelines
This command displays the configuration of this IPv4 Interface.

Examples
ADVA--> show ip-interface eth0
Name : eth0
IP Address : 10.12.8.139
Netmask : 255.255.248.0
DHCP Role : dhcp-client
DHCP : enabled
DHCP Client ID Control : disabled
DHCP Client ID : 139_SP
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:2f:c0:70
System Default Gateway : 10.12.8.1

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 712

Oscilloquartz: An ADVA Company Commands Reference

show ip-routes
Display all dynamic or static IPv4 Routes.

Security Level
retrieve

Command Level
Configure Communications

Syntax
show ip-routes

Guidelines
This command displays all dynamic and static IPv4 Routes.

Examples
Example to display all IPv4 routes:
ADVA--> configure communication
ADVA:comms--> show ip-routes
|Interface |Mask |Gateway |Destination |Metric |Advertise|Type
|----------------|---------------|---------------|---------------|--------|---------|----
---|
|eth0 |0.0.0.0 |172.17.11.1 |0.0.0.0 |0 |disabled
|static
|eth0 |255.255.255.0 |0.0.0.0 |172.17.11.0 |0 |enabled
|dynamic

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 713

Oscilloquartz: An ADVA Company Commands Reference

show ipv6-routes
Display the IPv6 routes in the routing table.

Security Level
retrieve

Command Level
Configure Communications

Syntax
show ipv6-routes

Guidelines
This command displays all dynamic and static IPv6 Routes.

Examples
ADVA--> configure communication
ADVA:comms-->
show ipv6-routes

===========================================================
Interface : eth0
Destination : 2534:3454:0000:0000:0000:0000:0000:0000
Prefix Length : 64
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 28
Advertise : enabled
Type : static
===========================================================
Interface : eth0
Destination : FDAA:0000:0000:0000:0000:0000:0000:0000
Prefix Length : 60
Gateway : 0000:0000:0000:0000:0000:0000:0000:0000
Metric : 256
Advertise : enabled
Type : static
===========================================================

Related Commands
add arp-entry
flush-arp-cache
add ip-route show mgmttnl
list mgmttnl
add mgmttnl show ping-result
ping
add ndp-entry show src-addr
ping6
configure src-addr show trace-route-
show arp-entries
delete arp-entry result
show eth0
delete ip-route trace-route
show ip-interface eth0
delete mgmttnl trace-route6
show ipv6-routes
add ndp-entry

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 714

Oscilloquartz: An ADVA Company Commands Reference

show ipv4-traffic-acl-entry
Display the configuration of this IPv4 Traffic Access Control (ACL) entry.

Security Level
retrieve

Command Level
IPv4 Traffic ACL

Syntax
show ipv4-traffic-acl-entry

Guidelines
This command is used to retrieve the configuration of this specific IPv4 Traffic Access
Control entry. Up to 100 access control entries can be configured. The entities are inherently
created and can only be edited. This means that add and delete is not supported on this
class.

Examples
To display an IPv4 Traffic ACL entry:
ADVA--> configure system
ADVA:system--> ipv4-traffic-acl-entry ipv4_traffic_acl-1
ADVA:system:ipv4_traffic_acl-1--> show ipv4-traffic-acl-entry

Control : enabled
Filter Action : permit
IP Version : ipv4
Network Address : 10.10.10.1
Network Mask : 255.255.255.0

Related Commands
configure (acl)
show acl-entry
configure (ipv4-traffic-acl)
show acl-list
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-list
show ipv4-traffic-acl-entry
show ipv6-traffic-acl-entry
control (ipv4-traffic-acl/ipv6-traffic-
show ipv6-traffic-acl-list
acl)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 715

Oscilloquartz: An ADVA Company Commands Reference

show ipv4-traffic-acl-list
Display all 100 IPv4 Traffic Access Control List (ACL) entries.

Security Level
retrieve

Command Level
Configure System

Syntax
show ipv4-traffic-acl-list

Guidelines
This command is used to retrieve all 100 IPv4 Traffic ACL entries, which allows you to filter
for in-band management, PTP, and NTP packets from a specific IP source address. The
source address for IPv4 can be of any type and is not limited to unicast addresses. Up to 100
entries can be made for each IP type, and each entry can be individually enabled or
disabled. Enabled entries apply to all PTP/NTP interfaces. The entries list displayed includes
the IP addresses set to 0.0.0.0.

Examples
ADVA--> configure system
ADVA:system--> show ipv4-traffic-acl-list

|ACL EID |IP Version |Network Address |Network Mask |Filter |Control
|---------------------|-----------|-----------------|-----------------|-------|---------|
|ipv4_traffic_acl-1 |ipv4 |10.10.10.1 |255.255.255.0 |permit |disabled
|ipv4_traffic_acl-2 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-3 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-4 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-5 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-6 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-7 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-8 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-9 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-10 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-11 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-12 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-13 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-14 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-15 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-16 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-17 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-18 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-19 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-20 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-21 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
--More--
|ipv4_traffic_acl-97 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled
|ipv4_traffic_acl-98 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 716

Oscilloquartz: An ADVA Company Commands Reference

|ipv4_traffic_acl-99 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled

|ipv4_traffic_acl-100 |ipv4 |0.0.0.0 |255.255.255.255 |permit |disabled

Related Commands
configure (ipv4-traffic-acl)
configure (ipv6-traffic-acl) show acl-list
configure (acl)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 717

Oscilloquartz: An ADVA Company Commands Reference

show ipv6-traffic-acl-entry
Display the configuration of this IPv6 Traffic Access Control List (ACL) entry.

Security Level
retrieve

Command Level
IPv6 Traffic ACL

Syntax
show ipv6-traffic-acl-entry

Guidelines
This command is used to retrieve the configuration of this specific IPv6 Traffic Access
Control entry. Up to 100 access control entries can be configured. The entities are inherently
created and can only be edited. This means that add and delete is not supported on this
class.

Examples
To display an IPv6 Traffic ACL entry:

ADVA--> configure system

ADVA:system--> ipv6-traffic-acl-entry ipv6_traffic_acl-1
ADVA:system:ipv6_traffic_acl-1--> show ipv6-traffic-acl-entry

Control : enabled
Filter Action : permit
IP Version : ipv6
IPv6 Address : 1000:1010:0000:0000:0000:0000:0000:000A
IPv6 Prefix Length : 60

Related Commands
configure (acl)
show acl-entry
configure (ipv4-traffic-acl)
show acl-list
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-entry
show ipv6-traffic-acl-entry
show ipv4-traffic-acl-list
control (ipv4-traffic-acl/ipv6-traffic-
show ipv6-traffic-acl-list
acl)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 718

Oscilloquartz: An ADVA Company Commands Reference

show ipv6-traffic-acl-list
Display all 100 IPv6 Traffic Access Control List (ACL) entries.

Security Level
retrieve

Command Level
Configure System

Syntax
show ipv6-traffic-acl-list

Guidelines
This command is used to retrieve all 100 IPv6 Traffic ACL entries, which allows you to filter
for in-band management and PTP packets from a specific IP source address. The source
address for IPv6 can be of any type and is not limited to unicast addresses. Up to 100 entries
can be made for each IP type, and each entry can be individually enabled or disabled.
Enabled entries apply to all PTP interfaces. The entries list displayed includes the IP
addresses set to 0000:0000:0000:0000:0000:0000:0000:000.

Examples
ADVA--> configure system
ADVA:system--> show ipv6-traffic-acl-list

|ACL EID |IP Version |IPv6 Address |IPv6 Prefix

Length |Filter |Control
|---------------------|-----------|------------------------------------------|-----------
---------|-------|---------|
|ipv6_traffic_acl-1 |ipv6 |1000:1010:0000:0000:0000:0000:0000:000A |60
|permit |disabled
|ipv6_traffic_acl-2 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-3 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-4 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-5 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-6 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-7 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-8 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-9 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-10 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
--More--
|ipv6_traffic_acl-97 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 719

Oscilloquartz: An ADVA Company Commands Reference

|ipv6_traffic_acl-98 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64

|permit |disabled
|ipv6_traffic_acl-99 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled
|ipv6_traffic_acl-100 |ipv6 |0000:0000:0000:0000:0000:0000:0000:0000 |64
|permit |disabled

Related Commands
configure (ipv4-traffic-acl)
show acl-list
configure (ipv6-traffic-acl)
show ipv4-traffic-acl-list
configure (acl)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 720

Oscilloquartz: An ADVA Company Commands Reference

show l2-dynamic-remote-slave
Display Layer 2 Dynamic Remote Slave configuration.

Security Level
Retrieve

Command Level
Configure Master Virtual Port

Configure PTP Port

Syntax
show l2-dynamic-remote-slave <l2_ds-eid>

The entity identifier of the Layer2 Dynamic Remote

Slave.
l2_ds-eid
Valid entry: dynamic_slave-ne-bc-mci-n; Where:
ne=1,bc=1,mci=1,n=1-128, 1-256or 1-512.

Guidelines

This command is used to display Layer 2 dynamic remote slave configuration. To list all
attached L2 dynamic remote slaves enter a question mark (?) in place of the l2-ds-eid.

Examples
Example at the Configure Master Clock Interface level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show l2-dynamic-remote-slave l2_dynamic_
slave-1-1-1-1
Port Identity : 00000010000000380001
Mac Address : 00:22:01:00:00:38

Example to list all Layer 2 Dynamic Remote Slaves:

ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show l2-dynamic-remote-slave ?

l2_dynamic_slave-1-1-1-1 PTP L2 Dynamic Remote Slave Entity Identifier.

l2_dynamic_slave-1-1-1-10 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-100 PTP L2 Dynamic Remote Slave Entity Identifier.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 721

Oscilloquartz: An ADVA Company Commands Reference

l2_dynamic_slave-1-1-1-101 PTP L2 Dynamic Remote Slave Entity Identifier.

l2_dynamic_slave-1-1-1-102 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-103 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-104 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-105 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-106 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-107 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-108 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-109 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-11 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-110 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-111 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-112 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-113 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-114 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-115 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-116 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-117 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-118 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-119 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-12 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-120 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-121 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-122 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-123 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-124 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-125 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-126 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-127 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-13 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-14 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-15 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-16 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-17 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-18 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-19 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-2 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-20 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-21 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-22 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-23 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-24 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-25 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-26 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-27 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-28 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-29 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-3 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-30 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-31 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-32 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-33 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-34 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-35 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-36 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-37 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-38 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-39 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-4 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-40 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-41 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-42 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-43 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-44 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-45 PTP L2 Dynamic Remote Slave Entity Identifier.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 722

Oscilloquartz: An ADVA Company Commands Reference

l2_dynamic_slave-1-1-1-46 PTP L2 Dynamic Remote Slave Entity Identifier.

l2_dynamic_slave-1-1-1-47 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-48 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-49 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-5 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-50 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-51 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-52 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-53 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-54 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-55 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-56 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-57 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-58 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-59 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-6 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-60 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-61 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-62 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-63 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-64 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-65 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-66 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-67 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-68 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-69 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-7 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-70 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-71 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-72 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-73 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-74 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-75 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-76 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-77 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-78 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-79 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-8 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-80 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-81 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-82 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-83 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-84 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-85 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-86 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-87 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-88 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-89 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-9 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-90 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-91 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-92 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-93 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-94 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-95 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-96 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-97 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-98 PTP L2 Dynamic Remote Slave Entity Identifier.
l2_dynamic_slave-1-1-1-99 PTP L2 Dynamic Remote Slave Entity Identifier.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 723

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state alias
delete dynamic-remote-slave show static-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 724

Oscilloquartz: An ADVA Company Commands Reference

show last-rcv-delay-rsp-msg
Display the last-received Delay Response message.

Security Level
retrieve

Command Level
Configure SOOC

Syntax
show last-rcv-delay-rsp-msg

Guidelines
This command is used to display the last-received Delay Response message in the two-way
delay Request/Response mechanism. The SOOC periodically initiates a Delay Request
Message to the Master Clock while the Master Clock answers with a Delay Response
Message for each Delay Request message it receives. The Delay Request-Response
Mechanism allows the SOOC to recover both Frequency and Time.

When the Unicast Message Negotiation is enabled, the rate of Delay Request-Response
Message is negotiated between the Master and Slave. It is configured by the user otherwise.

If there is no Delay Response Message received before the configured Master Delay
Message Timeout, the SOOC raises a PTSFLOSSSYNC condition.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show last-rcv-delay-rsp-msg

Last Delay_Resp Message Received :

090200360400040000000000000000000000000000B0AEFFFE028A3400015EEE037F000052CE10482D224FB40
080EA39D2C000000001

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 725

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ocs-port priority-mode-value
admin-state show last-rcv-delay-rsp-msg
alias show last-rcv-sync-msg
delete ocs-port show ocs-port
master-announce-rcpt-timeout show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 726

Oscilloquartz: An ADVA Company Commands Reference

show last-rcv-sync-msg
Display the last-received synchronization message.

Security Level
retrieve

Command Level
Configure SOOC

Syntax
show last-rcv-sync-msg

Guidelines
This command is used to display the last-received synchronization message.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show last-rcv-sync-msg

Related Commands
add ocs-port
master-priority
admin-state
alias
master-syncrcp-timeout
delete ocs-port
priority-mode
priority-mode-value
show ocs-port
master-announce-rcpt-timeout
show perf-mon
show sooc
slave-ipv4-address

unicast-restart-timer
master-ip-address
unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 727

Oscilloquartz: An ADVA Company Commands Reference

show last-reset-info
Displays the last cause for a system reset.

Security Level
superuser

Command Level
Admin Last Reset Cause

Syntax
show last-reset-info

Guidelines
This command displays the list of causes as seen in the example below.

Examples
ADVA-->
ADVA--> admin ?
config-file Config file options
database Database Backup and Restore options
last-reset-cause Last reset cause options
upgrade Release Upgrade options
ADVA--> admin last-reset-cause
ADVA:last-reset-cause--> show last-reset-info
Last Reset Cause : power_on
Last Reset Type : cold
Debug File One : Not Available
Debug File Two : Not Available
Debug File Three : Not Available

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 728

Oscilloquartz: An ADVA Company Commands Reference

show <linecardtype>
Display the configuration of a line card.

Command Level
Network Element

Configure Line Card

Syntax
show <linecard_type> <linecard-eid>
show <linecard_type>

The type of the line card.

linecard_type Valid values: bits-x16, clk-x16, ge-4s, irig-b, pps-x16, tod-pps-x16,
clk-x4-lpn
Line card entity identifier.
linecard-eid Valid values: linecardtype-ne-shelf-nte-slot, where: ne=1, shelf=1,
slot=1-2. Example: bits-x16-1-1-2

Examples
Example at the Network Element level:
ADVA--> network-element ne-1
ADVA-NE-1--> show 16xbits 16xbits-1-1-2
Admin State : in-service
Operational State : outage
Card Type :
Alias :

Example at the Configure Line Card level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure 16xbits 16xbits-1-1-2
ADVA-NE-1:16xbits-1-1-2--> show 16xbits
Admin State : in-service
Operational State : outage
Card Type :
Alias :

Related Commands
add eqpt, admin-state, alias, delete eqpt

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 729

Oscilloquartz: An ADVA Company Commands Reference

show local-user
Display the configuration parameters for this local user.

Security Level
superuser

Command Level
Configure User Security

Syntax
show local-user <user-id>

String representing the local user Profile to be

displayed.
user-id
Valid entry: Character string - 8 to 32 characters.
Default is root.

Guidelines
This command displays the configuration parameters for this local user. It does not display
the password for this user.

Examples
ADVA--> configure user-security
ADVA:user-sec--> show local-user SamanthaTeig

User Name : SamanthaTeig

Password : *******
Comment : Home Office
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-01-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : Never
CLI Paging : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 730

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol
regenerate-ssl-certificate
auth-type
security-strength
config-ssl-strength
security-trap-type
config-user <user-id> cli-paging
show active-ssl-certificate
config-user <user-id> comment
show all-users
config-user <user-id> login-
show local-user
timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show local-user
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 731

Oscilloquartz: An ADVA Company Commands Reference

show lpbk-params
Display loopback parameters for this port.

Security Level
retrieve

Command Level
Configure Access Port

Configure Network Port

Loopback

Syntax
show lpbk-params

Guidelines
This command displays loopback parameters for this port.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> show lpbk-params

Loopback outer VLAN 1 : 4094-0

Loopback outer VLAN 1 - Enabled : disabled
Loopback outer VLAN 2 : 4094-1
Loopback outer VLAN 2 - Enabled : disabled
Loopback outer VLAN 3 : 4094-2
Loopback outer VLAN 3 - Enabled : disabled
Loopback inner VLAN 1 : 4094-0
Loopback inner VLAN 1 - Enabled : disabled
Loopback inner VLAN 2 : 4094-1
Loopback inner VLAN 2 - Enabled : disabled
Loopback inner VLAN 3 : 4094-2
Loopback inner VLAN 3 - Enabled : disabled
Loopback Type : faceport
Loopback Status : none
Loopback Timer : 10
Swap SADA : none

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 732

Oscilloquartz: An ADVA Company Commands Reference

show master-clock
Display the configuration of a Precision Time Clock Protocol Master Clock (PTP MC).

Security Level
retrieve

Command Level
Configure PTP Network Element

Configure Master Clock

Syntax
show master-clock <mc-eid>

The Entity Identifier of Master Clock.

mc-eid Valid entry: ptp_master_clock-ne-n;Where: ne=1,
n=1-3.Example: ptp_master_clock-1-1

Guidelines
This command is used to Display the configuration of a Precision Time Clock Protocol
Master Clock (PTP MC).

Examples
Example at the Configure PTP Network Element level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show master-clock ptp_master_clock-1-1

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none
PTP Profile : g.8265.1

Example at the Configure Master Clock level:

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 733

Oscilloquartz: An ADVA Company Commands Reference

ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1

ADVA:ptp-NE-1:ptp_master_clock-1-1--> show master-clock

Alias : mc1
Admin State : management
Operational State : normal
Secondary States : act
Ptp Domain Number : 0
Clock Identity : 0080ea33b0a00001
Timing Referenec : time_clock-1-1-1-1
Priority 1 : 1
Priority 2 : 2
UTC Offset : 0
Active Time Reference : none

Related Commands
add master-clock delete master-clock
admin-state priority1
alias priority2

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 734

Oscilloquartz: An ADVA Company Commands Reference

show master-virtual-port
Display the configuration of a Master Virtual Port.

Security Level
Retrieve

Command Level
Configure Master Clock Interface

Configure Master Virtual Port

Syntax
show master-virtual-port
show master-virtual-port <mvp-eid>

The Entity Identifier of the Master Virtual Port to be

created.
mvp-eid Valid entry: master_virtual_port-ne-bc/mc-mci-n.
Where: ne=1, bc=1, mci=1-4, n=1.Example: master_
virtual_port-1-1-1-3

Guidelines

This command is used to display the configuration of a Master Virtual Port.

Examples
Example at the Master Virtual Port level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> configure master-virtual-port master_
virtual_port-1-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1:master_virtual_port-1-1-1-1--> show
master-virtual-port

Alias : mvp1
Admin State : management
Operational State : outage
Secondary States : sgeo
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1

Refer to the following example for Configure Master Clock Interface level:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 735

Oscilloquartz: An ADVA Company Commands Reference

ADVA--> configure ptp

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show master-virtual-port master_
virtual_port-1-1-1-1

Alias : mvp1
Admin State : management
Operational State : outage
Secondary States : sgeo
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1

Related Commands

add master-virtual-port alias

admin-state delete master-virtual-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 736

Oscilloquartz: An ADVA Company Commands Reference

show mci
Display the configuration of a Precision Time Protocol Master Clock Interface (PTP MCI).

Command Level
Configure Boundary Clock

Configure Master Clock

Configure Master Clock Interface

Syntax
show mci
show mci <mci-eid>

Entity Identifier of the Mater Clock Interface.

mci-eid
Valid entry: ptp_ptp_mci-ne-mc-n. Where: ne=1,
bc/mc=1, n=1-416.Example: ptp_ptp_mci-1-1-1

Examples
Example of displaying MCI details at the configure Master Clock level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> show mci ptp_mci-1-1-1

Alias : mci1
Administrative State : management
Operational State : outage
Secondary States : act,sgeo
IPv4 Address : 10.10.10.1
Subnet Mask : 255.255.255.0
IPv6 Address : Not Available
Prefix : Not Available
Interface name : mci001
Clock Type : one-step
Delay Mechanism : end-to-end
IP Version : ipv4
Ip Qos : 1
Ip Priority Mode : none
Max Lease Duration : 300
Max Slaves Supported : 5
Max Static Slaves Supported : 3
Port Identity :
Max Sync Msg Rate : 1-pkt-per-sec
Max Delay Req Msg Rate : 4-pkt-per-sec
Max Announce Msg Rate : 32-pkt-per-sec
Ptp Domain Number : 4
Clock Class Profile : g.8265.1
Clock Class : 0
Announce Ext TLV : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 737

Oscilloquartz: An ADVA Company Commands Reference

Example of displaying details at the configure Master Clock Interface level:

ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show mci
Alias : mci1
Administrative State : management
Operational State : outage
Secondary States : act,sgeo
IPv4 Address : 10.10.10.1
Subnet Mask : 255.255.255.0
IPv6 Address : Not Available
Prefix : Not Available
Interface name : mci001
Clock Type : one-step
Delay Mechanism : end-to-end
IP Version : ipv4
Ip Qos : 1
Ip Priority Mode : none
Max Lease Duration : 300
Max Slaves Supported : 5
Max Static Slaves Supported : 3
Port Identity :
Max Sync Msg Rate : 1-pkt-per-sec
Max Delay Req Msg Rate : 4-pkt-per-sec
Max Announce Msg Rate : 32-pkt-per-sec
Ptp Domain Number : 4
Clock Class Profile : g.8265.1
Clock Class : 0
Announce Ext TLV : Not Available

Related Commands
add mci delete mci
admin-state

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 738

Oscilloquartz: An ADVA Company Commands Reference

show mgmttnl
Display configuration for a management tunnel.

Security Level
Retrieve

Command Level
Configure Communications

Configure Management Tunnel

Syntax
show mgmttnl <mgmttnl-eid>

show mgmttnl

The EID of the management tunnel to delete.

mgmttnl-eid Valid entry: mgmt_tnl-mgmttnlNum, Where:
mgmttnlNum=1-255.Example: mgmt_tnl-34

Guidelines
This command displays configuration data for a management tunnel.

Examples
ADVA--> configure communication
ADVA:comms--> show mgmttnl mgmt_tnl-1
IP Address : 159.159.159.2
Subnet Mask : 255.255.255.252
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : 139_SP
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : tun01
Associated Port : network-1-1-1-1
System Default Gateway : 10.12.8.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 739

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
add ip-route ip-address (comms)
add mgmttnl list mgmttnl
buffer-size netmask
cir rip2Pkts-control
cos show mgmttnl
delete mgmttnl svlan-control
dhcp-client-id svlan-id
dhcp-client-id-control sys-def-gateway
dhcp-control vlan-id
eir

show nci
Displays the configuration of NTP clock interface.

Command Level
Configure NTP

Configure NCI

Syntax
show nci
show nci <ntp_clock_interface-eid>

ntp_clock_ Entity Identifier of the NTP clock interface.

interface-eid
Valid values: ntp_clock_interface-ne-nc-n, where ne=1, nc=1, n=1.

Examples
ADVA:ntp-NE-1:ntp_clock-1-1--> configure nci ntp_clock_interface-1-1-3
ADVA:ntp-NE-1:ntp_clock-1-1:ntp_clock_interface-1-1-3--> show nci
-or-
ADVA:ntp-NE-1:ntp_clock-1-1--> show nci ntp_clock_interface-1-1-3
Alias :
Administrative State : management
Operational State : outage
IP Protocol : ipv4
IPv4 Address : 1.1.1.3 (or IPv6 Address : ...)
Subnet Mask : 255.255.0.0 (or Prefix Length : ...)
Gateway IPv4 Address : 0.0.0.0 (or Gateway IPv6 Address : ...)
Interface name : nci3
DSCP : 0
Default Gateway Control : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 740

Oscilloquartz: An ADVA Company Commands Reference

Broadcast State : enabled

Broadcast IPv4 Address : 224.1.1.3 (or Broadcast IPv6 Address : ...)
Broadcast Intervall : 1-pkt-per-8-sec
Broadcast Max Hops : 2
Broadcast Sym Key Id : 1234
Broadcast NTP Version : ntpv4

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 741

Oscilloquartz: An ADVA Company Commands Reference

show ndp-entries
Display all Neighbor Discovery Protocol (NDP) entries.

Security Level
retrieve

Command Level
Any

Configure Communications

Syntax
show ndp-entries

Guidelines
This command is used to display all NDP entries information.

Examples
Example of displaying all NDP entries information:
ADVA--> configure communication
ADVA:comms--> show ndp-entries

|MAC Address |IPv6 Address |Interface |Type

|-------------------|------------------------------------------|---------------|---------
|
|ee:ff:dd:ee:1a:03 |0572:1258:0000:0000:0001:0000:0100:0000 |eth0 |static
|00:80:ea:03:03:03 |FDAA:0000:0000:0000:0000:0000:0000:00DD |eth0 |static
|c4:0f:07:e6:00:01 |FE80:0000:0000:0000:C60F:07FF:FEE6:0001 |eth0 |dynamic

Related Commands
delete ndp-entry
add arp-entry show ipv6-routes
dhcpv6-control
add ip-route ip-mode
flush-arp-cache
add ipv6-route ipv6-sys-def-gateway
flush-ndp-cache
add mgmttnl ipv6-unicast-addr
list mgmttnl
add ndp-entry show mgmttnl
ping
configure src-addr show ping-result
ping6
delete arp-entry show src-addr
show arp-entries
delete ip-route show trace-route-result
show eth0
delete ipv6-route trace-route
show ip-interface eth0
delete mgmttnl trace-route6
show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 742

Oscilloquartz: An ADVA Company Commands Reference

show ne-alarms
Display Network Element Alarms.

Security Level
retrieve

Command Level
Network Element

Syntax
show ne-alarms

Guidelines
This command is used to retrieve the list of all Active Alarms against the Network Element.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show ne-alarms

|Entity Id |ConditionType |Svc|Loc |Dir |NC |TimeStamp

|-------------------|------------------------------|---|-----|-----|---|-----------------
---|
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-01-
18,13:41:44

Related Commands
alarm-attributes show alarm-attributes
opr-lamptest show conditions
show alarms show ne-conditions

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 743

Oscilloquartz: An ADVA Company Commands Reference

show ne-conditions
Display Network Element Conditions.

Security Level
retrieve

Command Level
Network Element

Syntax
show ne-conditions

Guidelines
This command is used to retrieve the list of Active Conditions that are currently raised
against the Network Element.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show ne-conditions

|Entity Id |ConditionType |Svc|Loc |Dir |NC |TimeStamp

|-------------------|------------------------------|---|-----|-----|---|-----------------
---|
|sync-1-1-1-1 |frngsync |nsa|near |na |nr |2014-01-
18,13:27:53
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-01-
18,13:41:44

Related Commands
alarm-attributes show alarm-attributes
opr-lamptest show conditions
show alarms show ne-conditions

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 744

Oscilloquartz: An ADVA Company Commands Reference

show network-element
Display the attributes associated with the specified network element. Enter show
network-element followed by a question mark to display the applicable network
elements, including configured and discovered NEs.

Command Level
Any

Syntax
show network-element <ne-eid>

The Network Element Entity Identifier.

ne-eid
Valid entry: ne-n, Where: n=1. Example: ne-1

Examples
ADVA--> show network-element ne-1

NE Type : shelf-nteosa5422
NE Name : OSA 5422
NE Location :
NE Contact :
NE Description : OSA 5422
Accepted Status : enabled
NE CLI Prefix : NE-1
PM Interval : 15min

Related Commands
show all-slots show nte
show ne-alarms show shelf-info
show ne-conditions show slot-info

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 745

Oscilloquartz: An ADVA Company Commands Reference

show notify-entry
Display the Notify Entry for the specified Notify Name.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show notify-entry <name>

The locally arbitrary, but unique identifier associated

name with this SNMP Notify Entry.
Valid entry: Character string - 0 to 32 characters

Guidelines
This command displays the notify entry for the specified notifyName.

Examples
ADVA--> configure snmp
ADVA:snmp--> show notify-entry infoentry

Notify Name : infoentry

Notify Type : inform
Notify Tag : info

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 746

Oscilloquartz: An ADVA Company Commands Reference

show nte
Display the attributes associated with the specified NTE Equipment.

Command Level
Network Element

Configure NTE

Syntax
show nte
show nte <nte-eid>

The NTE equipment identifier. The nte-eid is only required when in

Network Element level.
nte-eid
Valid entry: nteosa5422-ne-shelf-n, Where: x=0 or 1ne=1, shelf=1,
n=1.Example: nteosa5422-1-1-1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show nte nteosa5422-1-1-1
Admin State : in-service
Operational State : normal
Secondary States : act
Card Type : nteosa5410
Alias : OSA 5422
SNMP Dying Gasp : disabled
Voltage (mV) : 13000
Temperature (deg C) : 46
Physical Entity Name : OSA 5422
MAC Address : 00:80:ea:39:d2:c0
Software Revision : 6.1.1-060
Firmware Revision : m60237
Hardware Revision : 01.01
USI : LBADVA71131800045
CLEI Code : PENDING
Part Number : 1078904650-01
Manufacturer Date : 2014-05-05
Manufacturer Site : Shenzhen

Related Commands
admin-state show network-element
alias show shelf-info
show all-slots show slot-info

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 747

Oscilloquartz: An ADVA Company Commands Reference

show ntp-client
Display the Network Time Protocol (NTP) client configuration parameters.

Security Level
Retrieve

Command Level
NTP Client

Syntax
show ntp-client

Guidelines

This command is used to retrieve the NTP client configuration parameters. The NTP Client
entity represents the system function that supports the Network Time Protocol client. It
supports the configuration and status for the NTP Client class.

Examples
To display the NTP client configuration parameters:
ADVA--> configure system
ADVA:system--> ntp-client
ADVA:system:ntp_client--> show ntp-client

Primary Server IP Version : ipv4

Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : primary
Round-trip delay to NTP server (micro secs) : 258
NTP server precision (micro secs) : 1000001
Polling interval (seconds) : 16

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 748

Oscilloquartz: An ADVA Company Commands Reference

show ntp-clock
Displays the configuration parameters for an NTP clock.

Command Level
Configure NTP

Syntax
show ntp-clock ntp_clock-EID

The element identifier of the NTP clock.

ntp_clock-EID
Valid entry: ntp_clock-1-n, where n=1.

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> show ntp-clock ntp_clock-1-1
Alias :
Admin State : management
Operational State : normal
NTP Server State : disabled
Time Reference Loss Handling : strtm-1-li-unkn
NTP Authentication : disabled
NTP Secure Mode : disabled
NTP Mode : ntp-server
Time Scale : UTC
Reference Clock ID : NA
Stratum Level : NA
Leap Indicator : NA
Root Delay [ms] : NA
Root Dispersion [ms] : NA

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 749

Oscilloquartz: An ADVA Company Commands Reference

show ocs-port
Display the configuration of the OCS Port.

Security Level
Retrieve

Command Level
Configure SOOC

Configure OCS Port

Syntax
show ocs-port

show ocs-port <ocs_port-eid>

The Entity Identifier of the OCS port. Valid entry: ocs_

ocs_port-eid port-ne-shelf-ts-n. Where: ne=1, shelf=1, ts=1, n=1.
Example: ocs_port-1-1-1-1

Guidelines
This command is used to Display the configuration of the OCS Port.

Examples
Example at the Configure SOOC level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show ocs-port ocs_port-1-1-1-1
Alias :
Port Identity : 0080ea2f518000000000
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
PTP State : listening
Admin State : in-service
Operational State : outage
Secondary States : sgeo

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 750

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
master-priority

add ocs-port master-syncrcp-timeout

admin-state priority-mode
alias priority-mode-value
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show perf-mon
show sooc
master-ip-address slave-ipv4-address
unicast-restart-timer
unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 751

Oscilloquartz: An ADVA Company Commands Reference

show perf-mon
Display the designated Performance Monitoring (PM) data for the Port or Flow.

Security Level
Retrieve

Command Level
Configure Access Port

Configure Network Port

Configure Access PTP Flow Point

Configure Network PTP Flow Point

Syntax
show perf-mon <pmdatatype> <interval>

The type of PM data to display.

pmdatatype
Valid entry: curr-data, history-data, threshold-data
The PM Interval for which to retrieve the current counts.
interval Valid entry: 15min, 1day or 5min, 1day (depending on the PM-
Interval setting at NTE)

Guidelines
This command displays the designated Performance Monitoring data for the Port or Flow
for the supplied interval. For valid entry, see Parameter Rules / Valid entries.

The type of PM data that can be retrieved are: current data, history data or threshold data.

Examples
Example at the Configure Access Port command level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> show perf-mon curr-data 15min

Interval Type : 15min

Timestamp : 2015-01-16,17:46:39
Valid Flag : disabled
abrrx : 0
abrtx : 0
apfd : 0
aufd : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 752

Oscilloquartz: An ADVA Company Commands Reference

esbf : 0
esbp : 0
esbs : 0
esc : 0
escae : 0
esde : 0
esf : 0
esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 0
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 0
l2cpfd : 0
l2cpfp : 0
lbc : 0
opr : 0
opt : 0
temp : 0
uas : 0

Example at the Configure PTP Flowpoint command level:

ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-
1-2
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-2--> show perf-mon
curr-data 15min
interval type : 15min
timestamp : 2015-01-16,18:01:47
valid flag : disabled
announcerx : 0
announcetx : 0
syncsrx : 0
syncstx : 0
followupsrx : 0
followupstx : 0
delayReqsrx : 0
delayReqstx : 0
delayRspsrx : 0
delayRspstx : 0
pdelayReqsrx : 0
pdelayReqstx : 0
pdelayRspsrx : 0
pdelayRspstx : 0
pdelayrspfollowupsrx : 0
pdelayrspfollowupstx : 0
signalingrx : 0
signalingtx : 0
mgmtrx : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 753

Oscilloquartz: An ADVA Company Commands Reference

mgmttx : 0
ptpunknownsrx : 0
ptpunknownstx : 0
minsyncrestime : 0
avgsyncrestime : 0
maxsyncrestime : 0
mindelayreqrestime : 0
avgdelayreqrestime : 0
maxdelayreqrestime : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 754

Oscilloquartz: An ADVA Company Commands Reference

show ping-result
Display the result of the last Ping Request.

Security Level
retrieve

Command Level
Any

Syntax
show ping-result

Guidelines
This command displays the result of the last Ping Request.

Examples
ADVA--> configure communication
ADVA:comms--> ping 10.10.10.10
ADVA:comms--> show ping-result
--- 10.10.10.10 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss

Related Commands
flush-arp-cache
add arp-entry show mgmttnl
list mgmttnl
add ip-route show ping-result
ping
add mgmttnl show src-addr
ping6
configure src-addr show trace-route-
show arp-entries
delete arp-entry result
show eth0
delete ip-route trace-route
show ip-interface eth0
delete mgmttnl
show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 755

Oscilloquartz: An ADVA Company Commands Reference

show pps-port
Display the Pulse Per Second (PPS) Port configuration.

Security Level
Retrieve

Command Level
Configure NTE

Configure PPS Port

Syntax
show pps-port <pps-eid>
show pps-port

Valid entry: pps-ne-shelf-nte-n, here: ne=1, shelf=1,

pps-eid
nte=1-2, n=1-2.Example: pps-1-1-1-1

Guidelines
This command is used to display the configuration of a PPS port.

Examples
Example at the Configure NTE level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure 5422nte nteosa-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> show pps-port pps-1-1-1-1

Admin State : unassigned

Operational State : outage
Alias :
Signal Direction type : input
Squelch Control : never
Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 0
.... Source Eid : gps-1-1-1-1

Example at the Configure PPS Port level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure pps-port pps-1-1-1-1
ADVA-NE-1:pps-1-1-1-1--> show pps-port

Admin State : unassigned

Operational State : outage
Alias :
Signal Direction type : input

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 756

Oscilloquartz: An ADVA Company Commands Reference

Squelch Control : never

Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 0
.... Source Eid : gps-1-1-1-1

Related Commands
admin-state input-rate
alias signal-direction (pps-port)
delay-compensation

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 757

Oscilloquartz: An ADVA Company Commands Reference

show ppsx16_group
Displays the configuration parameters for ppsx16 line card group.

Command Level
Configure ppsx16 line card

Configure ppsx16_group

Syntax
show ppsx16_group <ppsx16_group-eid>
show ppsx16_group

The entity identifier of the bitsx16 Group.

ppsx16_group-eid Valid entry: ppsx16_group-ne-shelf-nte-slot-group, Where: ne=1,
shelf=1, slot=2-3, group=1. Example: ppsx16_group-1-1-2-1

Examples
Example at the configure ppsx16 line card command level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure pps-x16 pps_x16-1-1-1
ADVA-NE-1:pps_x16-1-1-1--> show ppsx16_group ppsx16_group-1-1-1
Alias :
Admin State : management
Operational State : outage
Secondary State : act,sgeo,faf
Signal Direction type : output
Squelch Control : lock
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1

Example at the configure ppsx16 line card group command level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure pps-x16 pps_x16-1-1-1
ADVA-NE-1:pps_x16-1-1-1--> configure ppsx16_group ppsx16_group-1-1-1
ADVA-NE-1:ppsx16_group-1-1-1--> show ppsx16_group
Alias :
Admin State : management
Operational State : outage
Secondary State : act,sgeo,faf
Signal Direction type : output
Squelch Control : lock
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 758

Oscilloquartz: An ADVA Company Commands Reference

show provisioned-ssl-certificate
Display the provisioned SSL Certificate.

Security Level
retrieve

Command Level
Configure User Security

Syntax
show provisioned-ssl-certificate

Guidelines
This command displays the SSL certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> show provisioned-ssl-certificate ssl_certificate-1
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53
ADVA:user-sec-->

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 759

Oscilloquartz: An ADVA Company Commands Reference

show psu
Display the configuration of this Power Supply Unit (PSU).

Security Level
retrieve

Command Level
Configure PSU

Network Element

Syntax
show psu
show psu <psu-eid>

The Power Supply EID. The psu-eid is only required

when in Network-Element level.
psu-eid
Valid entry: psu-ne-shelf-n, Where: ne=1, shelf=1,
n=1-2.Example: psu-1-1-1

Guidelines
This command is used to display the configuration of a PSU for an OSA 5411.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure psu psu-1-1-1
ADVA-NE-1:psu-1-1-1--> show psu
Admin State : in-service
Operational State : outage
Secondary States : act,flt
PSU Type :
Alias :
Physical Entity Name : Not Available
Software Revision : Not Available
Firmware Revision : Not Available
Hardware Revision : Not Available
USI : Not Available
CLEI Code : Not Available
Part Number : Not Available
Manufacturer Date : Not Available
Manufacturer Site : Not Available

Related Commands
admin-state alias

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 760

Oscilloquartz: An ADVA Company Commands Reference

show ptp-clock
Display the configuration parameters for a PTP clock.

Security Level
retrieve

Command Level
Configure PTP Network Element

Configure PTP Clock

Syntax
show ptp-clock <ptp_clock-eid>
show ptp-clock

PTP Clock EID

ptp_clock-
eid Valid entry: ptp_clock-1-nWhere: n=1Example: ptp_
clock-1-1

Guidelines
This command displays the configuration parameters for a PTP clock.

Examples
Example at the Configure PTP Network Element level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show ptp-clock ptp_clock-1-1
Admin State : management
Operational State : normal
Secondary States : act
Alias :
PTP Profile : g8275-1
Clock Type : master-only
Oper Mode : t-gm
Clock Identity : 0080ea39d1500001
PTP Domain Number : 24
Time Source : time_clock-1-1-1-1
Priority 1 : 128
Priority 2 : 128
Local Priority : 128
Clock Accuracy : 33
Scaled Log Variance : 20061
Sync Id : none
Current Time Of Day : Not Available
Active Slave Port : none
Clock Recovery State : na
Phase Recovery State : na

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 761

Oscilloquartz: An ADVA Company Commands Reference

Time Traceability Status : disabled

Time Since Time Traceability Changed : 1
Freq Traceability Status : disabled
Time Since Freq Traceability Changed : 0
Sync Reference Mode : disabled
QL Mode : disabled
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-eec1
Received QL :

Example at the Configure PTP Clock level:

ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-clock
Admin State : management
Operational State : normal
Secondary States : act
Alias :
PTP Profile : g8275-1
Clock Type : master-only
Oper Mode : t-gm
Clock Identity : 0080ea39d1500001
PTP Domain Number : 24
Time Source : time_clock-1-1-1-1
Priority 1 : 128
Priority 2 : 128
Local Priority : 128
Clock Accuracy : 33
Scaled Log Variance : 20061
Sync Id : none
Current Time Of Day : Not Available
Active Slave Port : none
Clock Recovery State : na
Phase Recovery State : na
Time Traceability Status : disabled
Time Since Time Traceability Changed : 1
Freq Traceability Status : disabled
Time Since Freq Traceability Changed : 0
Sync Reference Mode : disabled
QL Mode : disabled
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-eec1
Received QL :

Related Commands
add ptp-clock localpriority
admin-state priority1
alias priority2
assumed-ql show ptp-clock
delete ptp-clock show ptp-port
expected-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 762

Oscilloquartz: An ADVA Company Commands Reference

show ptp-clock-probe
Display the configuration parameters and results for a Syncjack PTP clock probe.

Security Level
retrieve

Command Level
Configure Clock Analysis

Syntax
show ptp-clock-probe <ptp_clock_probe-eid>

PTP Clock Probe EID

ptp_clock_
probe-eid Valid entry: ptp_clock_probe-1-n where:n = 1-
4Example: ptp_clock_probe-1-1

Guidelines
This command displays the configuration parameters for a Syncjack PTP clock probe.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1
Name : PTPClkProbe01
Current State : completed
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Slave Ip Address : 192.168.106.5
Master Ip Address : 192.168.106.1
Direction : slave-to-master
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled
Measurement Type : phase
Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -2000000095
Time of last TIE Result : 2014-08-29,19:28:43
Actual Test Start Time : 2014-08-28,19:44:30

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 763

Oscilloquartz: An ADVA Company Commands Reference

Actual Test Duration, (s) : 199

Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-2
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | 8 | OK | OK |
| 10.0s | 16 | OK | OK |
| 20.0s | 18 | OK | OK |
| 50.0s | 34 | OK | OK |
| 100.0s | 39 | OK | OK |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
add ptp-clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result
mtie-restart
show ptp-clock-probe
master-ip-address
show syncjack-telecom-slave
name (ne, probe)
show history-result
ptp-flowpoint
direction
reference, reference-eid
expected-ql
slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 764

Oscilloquartz: An ADVA Company Commands Reference

show ptp-fp
Display the configuration of a Precision Time Protocol Flow Point.

Security Level
retrieve

Command Level
Configure PTP Access Port

Configure PTP Flow Point

Configure PTP Network Port

Configure Syncjack

Syntax
show ptp-fp
show ptp-fp <ptp_fp-eid>

The entity identifier of PTP Flow Point. Valid entry:

For Access Port: acc_ptp_flow_pt-ne-shelf-nte-port-n. Where:
ptp_fp-eid
ne=1, shelf=1, slot=1, port=1, n=1-m (max ptp flow points).
Example: acc_ptp_flow_pt-1-1-1-3-1.

Guidelines
This command is used to display the configuration of a Precision Time Protocol Flow Point
(PTP FP).

Examples
Example for a Transparent Clock at the Configure PTP Access Port level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-3
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-3--> show ptp-fp acc_ptp_flow_pt-1-1-1-3-1

Alias :
PTP Flowpoint Type : transparent-clock
PTP Clock : none
EVC : flow-1-1-1-3-1
Outer VLAN Ethertype : 33024
Outer VLAN Tag List : 67:79
Outer Untagged : disabled
Inner1 VLAN Ethertype : 33024
Inner1 VLAN Tag List : 5-*
Inner1 Untagged : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 765

Oscilloquartz: An ADVA Company Commands Reference

Inner2 VLAN Ethertype : 0

Inner2 VLAN Tag List :
Inner2 Untagged : disabled
Operational State : outage
Admin State : management
Secondary States : sgeo

Example for a Telecom Slave at the Configure PTP Access Port level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> show ptp-fp acc_ptp_flow_pt-1-1-1-1-1

Alias :
PTP Flowpoint Type : oc-slave
PTP Clock : sooc-1-1-1
EVC : flow-1-1-1-1-1
Outer VLAN Ethertype : 0x0
Outer VLAN Tag List :
Inner1 VLAN Ethertype : 0
Inner1 VLAN Tag List :
Inner2 VLAN Ethertype : 0
Inner2 VLAN Tag List :
Operational State : outage
Admin State : in-service
Secondary States : sgeo

Example for a Transparent Clock at the Configure PTP Flow Point level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure nte nteosa5422-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1--> configure ptp-fp acc_ptp_flow_pt-1-1-1-1
ADVA:ptp-NE-1:nteosa5422-1-1-1:access-1-1-1-1:acc_ptp_flow_pt-1-1-1-1-1--> show perf-mon
curr-data 15min
interval type : 15min
timestamp : 2015-09-25,14:38:00
valid flag : disabled
announcerx : 0
announcetx : 0
syncsrx : 0
syncstx : 0
followupsrx : 0
followupstx : 0
delayReqsrx : 0
delayReqstx : 0
delayRspsrx : 0
delayRspstx : 0
pdelayReqsrx : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 766

Oscilloquartz: An ADVA Company Commands Reference

pdelayReqstx : 0
pdelayRspsrx : 0
pdelayRspstx : 0
pdelayrspfollowupsrx : 0
pdelayrspfollowupstx : 0
signalingrx : 0
signalingtx : 0
mgmtrx : 0
mgmttx : 0
ptpunknownsrx : 0
ptpunknownstx : 0
minsyncrestime : 0
avgsyncrestime : 0
maxsyncrestime : 0
mindelayreqrestime : 0
avgdelayreqrestime : 0
maxdelayreqrestime : 0
minpdelayreqrestime : 0
avgpdelayreqrestime : 0
maxpdelayreqrestime : 0
minpdelayrsprestime : 0
avgpdelayrsprestime : 0
maxpdelayrsprestime : 0

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 767

Oscilloquartz: An ADVA Company Commands Reference

show ptp-network-probe
Display the configuration parameters for a PTP Network Probe.

Security Level
retrieve

Command Level
Configure PTP Network Analysis

Configure PTP Network Probe

Syntax
show ptp-network-probe <ptp_network_probe-eid>

Probe EID
ptp_network_
probe-eid Valid entry: ptp_network_probe-1-n Where:n =
1Example: ptp_network_probe-1-1

Guidelines
This command displays the configuration parameters a Syncjack PTP Network Probe.

Examples
Example of Configure PTP Network Analysis level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> show ptp-network-probe ptp_network_probe-1-1

Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 768

Oscilloquartz: An ADVA Company Commands Reference

FPP Cluster Range - Assured, (ns) : 25000

FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Example of Configure PTP Network Probe level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure ptp-network-analysis
ADVA-NE-1:syncjack:ptp-network-analysis--> configure ptp-network-probe ptp_network_probe-
1-1
ADVA-NE-1:syncjack:ptp_network_probe-1-1--> show ptp-network-probe

Name : PTPNWProbe1
Current State : not-scheduled
Ptp Flowpoint : net_ptp_flow_pt-1-1-1-1-1
IP Version : ipv4
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Slave Ip Address : 10.206.206.6
Master Ip Address : 10.206.206.1
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Res PDV fwd Low Range, (ns) : 200
Res PDV fwd Medium Range, (ns) : 500
Res PDV fwd High Range, (ns) : 2000
Res PDV rev Low Range, (ns) : 200
Res PDV rev Medium Range, (ns) : 500
Res PDV rev High Range, (ns) : 2000
FPP Cluster Range - Assured, (ns) : 25000
FPP Cluster Range - Satisfied, (ns) : 150000
Scheduler Eid : none
Forward Score : 0
Reverse Score : 0

Related Commands
add ptp-network-probe
reference, reference-eid
delete ptp-network-probe
restart-with-configfile
show ptp-network-probe
rpdv-frw-lowrange
expected-ql
rpdv-frw-mediumrange
fpp-cluster-assured
rpdv-rev-highrange
ip-version
rpdv-rev-lowrange
master-ip-address
rpdv-rev-mediumrange
name (ne, probe)
show ptp-network-probe
pdv-limit-assured
show ptp-fp
pdv-limit-satisfied
slave-ipv4-address
ptp-flowpoint

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 769

Oscilloquartz: An ADVA Company Commands Reference

show ptp-port
Displays the configuration parameters for a PTP port.

Security Level
Retrieve

Command Level
Configure PTP Clock

Configure PTP Port

Syntax
show ptp-port <port-eid>

show ptp-port

PTP Port EID

ptp_port-eid Valid entry: ptp_port-1-m-nWhere: m=ptp clock

number, n=1-max ptp port numberExample: ptp_
port-1-1-1

Guidelines
This command displays the configuration parameters for a PTP port.

Examples
Example at the Configure PTP Clock level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> show ptp-port ptp_port-1-1-1

Admin State : management

Operational State : outage
Secondary States : act,sgeo
Alias :
Master Clock Type : one-step
Master Only: Enabled
Peer Port Identity : Not Available
Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 770

Oscilloquartz: An ADVA Company Commands Reference

Expected Clock Class : Not Available

Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 248
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
0102002C180000000000000000000000000000000080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

Example at the Configure PTP Port level:

ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port
Admin State : management
Operational State : outage
Secondary States : act,sgeo
Alias :
Master Clock Type : one-step
Master Only : Enabled
Peer Port Identity: Not Available
Local Priority : 128
PTP Flowpoint : acc_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : non-forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Clock Class : 248
Peer MacAddress : 00:80:ea:39:d1:51
Last Announce Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received : 0102002C180000000000000000000000000000000
080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 771

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ptp-port
localpriority
admin-state
min-exp-clk-cls
alias
show ptp-clock
announce-receipt-timeout
show ptp-port
delay-response-timeout
sync-receipt-timeout
delete ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 772

Oscilloquartz: An ADVA Company Commands Reference

show rap-server
Display the configuration parameters for this Remote Authentication Server.

Security Level
retrieve

Command Level
Remote Authentication Server

Syntax
show rap-server

Guidelines
This command displays the configuration parameters for this Remote Authentication Server.
Up to three RAP servers (1-3) may be configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_srvr-1--> show rap-server
RAS Status : enabled
Order : first
IP Version : ipv6
IPV4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 2
Secret : *****
RADIUS accounting port : 1813

Related Commands
accounting-port
control
retries
ip-address (rap)
secret
ip-version (rap)
show rap-server
ipv6-address (rap)
timeout
order
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 773

Oscilloquartz: An ADVA Company Commands Reference

show release-versions
Display the Active/Standby System Software Release versions.

Security Level
retrieve

Command Level
Admin Upgrade

Syntax
show release-versions

Guidelines
This command is used to retrieve the Active/Standby Release versions.

Examples
To display the Active/Standby Release versions:
ADVA--> admin upgrade
ADVA:upgrade--> show release-versions

Active Release Version : 7.1.1-021

Standby Release Version : 7.1.1-020
Download Software Version : Not Available

Related Commands
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 774

Oscilloquartz: An ADVA Company Commands Reference

show remote-user
Display the configuration parameters for this remote user.

Security Level
superuser

Command Level
Configure User Security

Syntax
show remote-user <user-id>

String representing the local user Profile to be

displayed.
user-id
Valid entry: Character string - 8 to 32 characters.
Default is root.

Guidelines
This command displays the configuration parameters for this remote user. It does not
display the password for this user.

Examples
ADVA--> configure user-security
ADVA:user-sec--> show remote-user RemoteUser

User Name : RemmoteUser

Password : *******
Comment : RAP User
Privilege Level : retrieve
Login Timeout : 15
Failed Login Attempts : 0
Last Login : 2014-06-01,00:00:00
User Locked Out : disabled
User Last Locked Out Time : 2014-01-01,00:00:00
CLI Paging : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 775

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 776

Oscilloquartz: An ADVA Company Commands Reference

show running-config
Display the current running database configuration.

Security Level
retrieve

Command Level
Any

Syntax
show running-config [current | delta]

Guidelines
This command displays the current database in the form of a CLI text file. This file can be
saved and edited to create a config file. Lines that begin with the “#” symbol are remarks
and are ignored by the system. Rules and commands for config files are covered in admin
config-file Commands.

For a maximum database configuration the creation of the running-config file could take up
to 15 minutes.

Current is the complete current database and delta is the difference between the current
database and the system default.

Examples
ADVA--> admin config-file
ADVA:config-file--> show running-config delta

#
#CLI:SYSTEM Edit
#
home
configure system
telnet enabled
proxy-arp enabled
alarm-attributes network-port ql-mismatch nsa cr

#
#CLI:IP SYSTEM Edit
#
home
configure communication
configure eth0 dhcp-control enabled
configure eth0 dhcp-role dhcp-client

#
#CLI:MANAGEMENT TUNNEL-1 Create
#
home

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 777

Oscilloquartz: An ADVA Company Commands Reference

configure communication
add mgmttnl 1 "yknot" ethernet vlan-based 100 disabled 10.10.10.5 255.255.255.0
network-1-1-1-1
configure mgmttnl mgmt_tnl-1
rip2Pkts-control enabled

#end
home
admin config-file
ADVA:config-file-->

Related Commands
description (config-file)
show configfile
list
show configfile-status
load
show running-config
remove
trace-route
restart-with-configfile
transfer-file
save

show satellite-entries
Displays information about currently tracked satellites.

Command Level
Configure NTE

Configure GPS Port

Syntax
show satellite-entries <satellite-entries>
show satellite-entries

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> show satellite-entries

|SV |In Use |Constellation |C/No[dB-Hz] |Health |Azimuth[deg] |Elevation

[deg]
|----|--------|----------------|------------|----------------|--------------|------------
--|
|23 |yes |gps-only |32 |ok |114 |13
|9 |yes |gps-only |37 |ok |97 |50
|8 |yes |gps-only |24 |ok |81 |16
|30 |yes |gps-only |35 |ok |311 |64
|7 |yes |gps-only |50 |ok |29 |53
|28 |yes |gps-only |34 |ok |185 |49
|27 |no |gps-only |21 |ok |46 |4
|2 |no |gps-only |39 |ok |256 |3
|6 |no |gps-only |20 |ok |220 |2

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 778

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state gnss-system-types
alias pps-generation
delay-value delay-type
cno-mask elevation-mask
installation-type pdop-mask
sat-min1-threshold show gps-port
sat-min2-threshold self-survey-period

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 779

Oscilloquartz: An ADVA Company Commands Reference

show sec-log-config
Display the System Security Log configuration.

Security Level
retrieve

Command Level
Security Log

Syntax
show sec-log

Guidelines
This command is used to retrieve the System Security Log configuration.

Examples
To set System Security log events:
ADVA--> configure system
ADVA:system--> security-log
ADVA:system:security-log--> show sec-log-config

Syslog Storage : enabled

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 780

Oscilloquartz: An ADVA Company Commands Reference

show security-banner
Display the System Security Banner.

Security Level
retrieve

Command Level
Configure System

Syntax
show security-banner

Guidelines
This command is used to retrieve the System Security Banner.

Examples
To display the Security Banner:
ADVA--> configure system
ADVA:system--> show security-banner

This is a private system. Unauthorized access or use may lead to prosecution.

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 781

Oscilloquartz: An ADVA Company Commands Reference

show security-log
Display Security Log content.

Security Level
superuser

Command Level
Any

Syntax
show security-log

Guidelines
This command is used to retrieve the contents of the Security Log.

Examples
ADVA--> show security-log

2014-02-20 09:17:46:root:22:EVT:192.168.10.147:root has logged in

2014-02-20 09:38:48:root:23:EVT:192.168.10.147:root has logged in
2014-02-20 12:26:15:root:1:EVT:172.17.11.30:root has logged in
2014-02-20 13:23:55:root:5:EVT:172.17.11.30:root has been auto logged out
2014-02-20 13:31:03:root:6:EVT:172.17.11.30:root has logged in
2014-02-20 14:24:19:root:7:EVT:172.17.11.24:root has logged in
2014-02-20 14:34:02:root:8:EVT:192.168.10.147:root has logged out
2014-02-20 15:28:40:root:9:EVT:172.17.11.30:root has logged in
2014-02-20 16:53:19:root:10:EVT:192.168.10.147:root has logged out
2014-02-21 10:14:28:root:1:EVT:Serial:root has logged in
2014-02-21 10:15:43:root:2:EVT:172.17.11.30:root has failed login attempt
2014-02-21 10:15:51:root:3:EVT:172.17.11.30:root has logged in
2014-02-21 10:21:51:root:1:EVT:172.17.11.30:root has logged in
2014-02-21 10:23:47:root:2:EVT:Serial:root has logged in
2014-02-21 10:38:02:root:3:EVT:Serial:root has logged out
2014-02-21 10:38:21:root:4:EVT:172.17.11.30:root has logged out
2014-02-21 10:55:49:root:5:EVT:172.17.11.30:root has logged in
2014-02-21 10:56:22:root:6:EVT:Serial:root has logged in
2014-02-21 13:03:11:root:7:EVT:172.17.11.30:root has logged out
2014-02-21 13:03:23:root:8:EVT:172.17.11.30:root has logged in
2014-02-22 09:29:32:root:9:EVT:192.168.10.147:root has logged in
2014-02-22 11:51:29:root:1:EVT:172.17.11.30:root has logged in
2014-02-22 13:58:39:root:2:EVT:192.168.10.147:root has logged in
2014-02-13 17:31:47:root:EVT:USM user McKracken has been deleted
2014-02-13 17:41:40:root:EVT:USM user McCracken has been created
2014-02-13 17:42:18:root:EVT:USM user McCracken has been deleted
2014-02-13 17:45:10:root:EVT:USM user McCracken has been created
2014-02-22 16:58:00:root:3:EVT:Serial:root has logged in
2014-02-22 17:03:03:root:4:EVT:Serial:root has logged out
2014-02-22 17:03:48:root:5:EVT:172.17.11.30:root has logged out

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 782

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 783

Oscilloquartz: An ADVA Company Commands Reference

show security-system
Displays the configuration parameters for this Security System.

Security Level
retrieve

Command Level
Configure User Security

Syntax
show security-system

Guidelines
This command displays the configuration parameters for this Security System. It does not
display the Security User details.

Examples
To display the configuration parameters for this Security System:
ADVA--> configure user-security
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 784

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
regenerate-ssl-certificate
auth-protocol
security-strength
auth-type
security-trap-type
config-ssl-strength
show active-ssl-certificate
config-user <user-id> cli-paging
show all-users
config-user <user-id> comment
show local-user
config-user <user-id> login-timeout
show provisioned-ssl-
config-user <user-id> password
certificate
config-user <user-id> priv-level
show remote-user
delete <user-id>
show security-system
log-anonyme-interval
tacacs-privilege-control
nas-ip-address
tacacs-user-privilege
nas-ipv6-address
unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 785

Oscilloquartz: An ADVA Company Commands Reference

show sfp-info
Display SFP information for this port.

Security Level
Retrieve

Command Level
Configure Access Port

Configure EBP

Configure Network Port

Syntax
show sfp-info

Guidelines
This command displays SFP information for this port.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure network-port network-port-1-1-1-1
ADVA-NE-1:network-1-1-1-1--> show sfp-info

SFP Vendor Name : ADVA

SFP Part Number : 0031003010
SFP Serial Number : EOPW031000193000
SFP Mfg Date : 2014-03-10
SFP Connector Type : lc
SFP Link Length (m) : 10000
SFP Media Type : single-mode
SFP Laser Wave Length (nm) : 1310

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 786

Oscilloquartz: An ADVA Company Commands Reference

show shelf-info
Display the shelf (NE) information.

Security Level
retrieve

Command Level
Network Element

Syntax
show shelf-info

Guidelines
This command is used to display the shelf (NE) information.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show shelf-info

Shelf Name : OSA 5422

Admin State : in-service
Operational State : normal
Secondary States : none
CLEI Code : PENDING
Part Number : 1078904650-01
Backplane Revision : 01.01
Backplane USI : LBADVA71123306990
Backplane Mfg Date : 2015-08-22
Backplane Mfg Site : Shenzhen

Related Commands
show all-slots show nte
show ne-alarms show nte
show ne-conditions show slot-info

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 787

Oscilloquartz: An ADVA Company Commands Reference

show slot-info
Display the slot information for slot number 1.

Security Level
retrieve

Command Level
Network Element

Syntax
show slot-info <slot-num>

The slot number in the NE.

slot-num
Valid entry: 1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> show slot-info 1

Slot Type : generic-slot

Card Type : nteosa5422
Physical Entity Name : OSA 5422
MAC Address : 00:80:ea:2f:c0:70
Software Revision : 5.2.1-020
Firmware Revision : m45584
Hardware Revision : 01.01
USI : LBADVA71123306990
CLEI Code : PENDING
Part Number : 1078904650-01
Manufacturer Date : 2015-08-22
Manufacturer Site : Shenzhen

Related Commands
show all-slots show shelf-info

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 788

Oscilloquartz: An ADVA Company Commands Reference

show sooc
Display the configuration of a Slave Only Ordinary Clock (SOOC).

Security Level
Retrieve

Command Level
Configure SOOC

Configure Telecom Slave

Syntax
show sooc
show sooc <sooc-eid>

Entity Identifier of SOOC.

sooc-eid
Valid entry: sooc-ne-ts-n, Where ne=1, ts=1, n=1.

Guidelines
This command is used to display the configuration of a Slave Only Ordinary Clock (SOOC).

Examples
Example of displaying SOOC details at the configure Telecom Slave level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> show sooc sooc-1-1-1
Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave IPv4 Address : 110.110.10.10
Slave Subnet Mask : 255.255.255.0
Slave IPv6 Address : Not Available
Slave Prefix : Not Available
Interface name : sooc1
Current Offset From Master, (ns) : 0
Current History 15 min. Index : 0
Master Clock Type :
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end
Master Priority : 128
Master IP Version : ipv4
Master IPv4 Address : 110.110.110.10

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 789

Oscilloquartz: An ADVA Company Commands Reference

Master IPv6 Address : Not Available

Master Announce Message Rate : 1-pkt-per-16-sec
Master Announce Receipt Timeout, (intervals) : 2
Master Delay Response Message Rate : 32-pkt-per-sec
Master Delay Response Receipt Timeout, (intervals) : 255
Master Sync Message Rate : 32-pkt-per-sec
Master Sync Receipt Timeout, (intervals) : 255
Master Lease Duration, (s) : 300
Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 1
Expected Clock Class : 247
E2E Asymmetry Delay Comp Mode : automatic
E2E Asymmetry Delay Comp Status : operational
E2E Asymmetry Delay Comp Value, (ns) : -50
Lockout Control : disabled
Protection State : active
WTR : false
Clock Recovery State : normal
Phase Recovery State : normal

Related Commands
add ocs-port
priority-mode-value
admin-state
show last-rcv-delay-rsp-msg
alias
show last-rcv-sync-msg
delete ocs-port
show ocs-port
master-announce-rcpt-timeout
show perf-mon
master-priority
unicast-restart-timer
master-syncrcp-timeout
unicast-timeout
priority-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 790

Oscilloquartz: An ADVA Company Commands Reference

show src-addr
Display the configured NTE IP Address Type and SNMP v1 IP Interface Name.

Security Level
Retrieve

Command Level
Configure Communication

Syntax
show src-addr

Guidelines
This command is used to display the configured source address information.

Examples
ADVA--> configure communication
ADVA:comms--> show src-addr
Address Type : sys-ip-addr
Source Address Interface Name : eth0
SNMP v1 IP Interface Name : eth0

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 791

Oscilloquartz: An ADVA Company Commands Reference

show static-remote-slave
Display Static Remote Slave configuration.

Security Level
retrieve

Command Level
Configure Master Clock Interface

Configure Static Remote Slave

Syntax
show static-remote-slave <srs-eid>

The entity identifier of the Remote Static Slave

srs-eid Valid entry: static_slave-ne-mc/bc-mci-n; Where:
ne=1, mc/bc=1, mci=1, n=1-4 or 1-16.

Guidelines
This command is used to display the configuration of a Static Remote Slave.

Examples
Example at the Configure Master Clock Interface level:
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> show static-remote-slave static_
slave-1-1-1-1
Alias : srs1
Admin State : management
Operational State : outage
Secondary States : sgeo
Time Created : 2017-06-25,10:25:17
Negotiated Announce Lease Duration : 0
Lease Duration Remain Time : 0
Negotiated Delay Resp Lease Duration : 0
Delay Resp Duration Remain Time : 0
Negotiated Sync Lease Duration : 0
Sync Duration Remain Time : 0
Clock Identity : 00000000000000000
Unicast Msg Negotiation : disabled
Slave V4 Address : 110.101.101.101
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 2-pkt-per-sec
Sync Msg Rate : 1-pkt-per-sec

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 792

Oscilloquartz: An ADVA Company Commands Reference

Example at the Static Remote Slave level:

ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure master-clock ptp_master_clock-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1--> configure mci ptp_mci-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1--> configure static-remote-slave static_
slave-1-1-1-1
ADVA:ptp-NE-1:ptp_master_clock-1-1:ptp_mci-1-1-1:static_slave-1-1-1-1--> show static-
remote-slave
Alias : srs1
Admin State : management
Operational State : outage
Secondary States : sgeo
Time Created : 2017-06-25,10:25:17
Negotiated Announce Lease Duration : 0
Lease Duration Remain Time : 0
Negotiated Delay Resp Lease Duration : 0
Delay Resp Duration Remain Time : 0
Negotiated Sync Lease Duration : 0
Sync Duration Remain Time : 0
Clock Identity : 00000000000000000
Unicast Msg Negotiation : disabled
Slave V4 Address : 110.101.101.101
Slave V6 Address : Not Available
Announce Msg Rate : 1-pkt-per-1-sec
Delay Resp Msg Rate : 2-pkt-per-sec
Sync Msg Rate : 1-pkt-per-sec

Related Commands
add static-remote-slave admin-state
alias delete static-remote-slave
show dynamic-remote-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 793

Oscilloquartz: An ADVA Company Commands Reference

show subnetwork
Display the SubNetwork name used for the CLI root prompt.

Security Level
retrieve

Command Level
Root

Syntax
show subnetwork

Guidelines
This command is used to display the SubNetwork name used for the CLI root prompt.

Examples
ADVA--> show subnetwork

Subnetwork CLI Prefix : ADVA

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 794

Oscilloquartz: An ADVA Company Commands Reference

show sync
Display the status of NE’s Sync settings.

Security Level
Retrieve

Command Level
Network Element

Configure Sync

Syntax
show sync <sync-eid>

Guidelines

This command is used to display the status of NE’s Sync settings.

The entity identifier of the system synchronization.

sync-eid Valid entry: sync-ne-shelf-nte-n. Where: ne=1,
shelf=1,nte=1, n=1. Example: sync-1-1-1-1

Examples
Example at the Configure Sync level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : chassis
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option2-sonet
WTR Time : 5
Selection Mode : prio-mode
Clock PLL Bw : eec
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec2
User Request Action : none
User Request Target : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 795

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 796

Oscilloquartz: An ADVA Company Commands Reference

show sync-available-refs
Display the entities available to become entries on the Sync Reference list.

Security Level
retrieve

Command Level
Configure Sync

Syntax
show sync-available-refs

Guidelines
This command is used to display the entities available to become entries on the Sync
Reference list. To become available, network and access ports have to have their Sync-E
Mode enabled.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show sync-available-refs
|----------------------------------------|
| network-1-1-1-1 |
|----------------------------------------|
| access-1-1-1-1 |
|----------------------------------------|

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 797

Oscilloquartz: An ADVA Company Commands Reference

show syncjack-telecom-slave
Display the Syncjack status of the telecom slave.

Security Level
retrieve

Command Level
Configure Syncjack

Syntax
show syncjack-telecom-slave <ts-eid>

The entity Identity of the Telecom Slave.

ts-eid Valid entry: ts-ne-n. Where: ne=1, n=1. Example: ts-
1-1.

Guidelines
This command is used to display the Syncjack staus of the telecom slave.

Examples
Example at the Syncjack level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> show syncjack-telecom-slave ts-1-1

Clock Recovery State : freerun

FREQUENCY RECOVERY PERFORMANCE :
Frequency traceability : false
Time since Frequency traceability change, (s) : 47257
Frequency recovery target mask : g823-PDH-traffic
Current Clock Recovery Score : Not Available
Time of Last Clock Recovery Score update : 2014-01-23,09:05:23
PHASE RECOVERY PERFORMANCE :
Time traceability : false
Time since Time traceability change, (s) : 47257
Target Phase Recovery Accuracy, (ns) : 500
Current Phase Recovery Score : Not Available
Time of Last Phase Recovery Score update : 2014-01-23,09:05:23

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 798

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add ptp-clock-probe
mtie-mask-margin
delete ptp-clock-probe
mtie-mask-type
delete history-result
mtie-restart
show ptp-clock-probe
master-ip-address
show syncjack-telecom-slave
name (ne, probe)
show history-result
ptp-flowpoint
direction
reference, reference-eid
expected-ql
slave-ipv4-address
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 799

Oscilloquartz: An ADVA Company Commands Reference

show syncref
Display the status of the Sync Reference.

Command Level
Configure Sync

Syntax
show syncref <syncref-eid>

The EID assigned to an available sync reference.

syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref index, Where:

ne=1, shelf=1, slotnumber=1syncref index=1-2.Example: syncref-
1-1-1-1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias :
Priority : 1
Source : clk-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : unavailable
Effective QL : ql-failed

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 800

Oscilloquartz: An ADVA Company Commands Reference

show syslog-server
Display the System Log Server configuration parameters.

Security Level
retrieve

Command Level
Syslog Server

Syntax
show syslog-server

Guidelines
This command is used to retrieve the configuration parameters for a SysLog Server. Up to 3
Syslog servers may be configured.

Examples
To display Syslog server configuration parameters:
ADVA--> configure system
ADVA:system--> syslog-server 1
ADVA:system:syslog-1--> show syslog-server

IP Version : ipv4
IPV4 Address : 10.10.10.10
IPV6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
port : 514

Related Commands
admin-state
alias show audit-log
configure ip-version show conditions
configure ipv4-address show ne-conditions
list sys-resource show system
show alarms

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 801

Oscilloquartz: An ADVA Company Commands Reference

show system
Display the System configuration parameters.

Security Level
retrieve

Command Level
Any

Syntax
show system

Guidelines
This command is used to retrieve the System configuration parameters. The System Entity
represents the logical element that supports many of the common attributes that are
supported for the entire subnetwork. In addition, many of the administrative tasks are
displayed, including: file transfer, software upgrade, database backup and restore.

Refer to Table 1 for File Transfer Status and Database or Upgrade Current State response
descriptions.

Examples
To display system configuration parameters:
ADVA--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 802

Oscilloquartz: An ADVA Company Commands Reference

Validation Timer Expiration : Not Applicable

Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 803

Oscilloquartz: An ADVA Company Commands Reference

show target-address
Display the traphost Target Address entry.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show target-address <address-name>

A character string representing the SNMP Target

address-name Address Name.
Valid entry: Character string - 0 to 64 characters

Guidelines
This command displays the traphost target address entry.

Example:
ADVA--> configure snmp
ADVA:snmp--> show target-address TargetAddr1

Target Address Name : TA2

Transport Address : [2444:0000:0000:0000:0000:0000:0000:000B]:64
Target Params Name : TA
Retry Count : 3
Timeout : 5
Tag List : trap
Dying Gasp Intf Port EID : none
SNMP Dying Gasp : disabled
Dying Gasp Active : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 804

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 805

Oscilloquartz: An ADVA Company Commands Reference

show target-params
Display the target parameters entry for the specified Parameter Name.

Security Level
retrieve

Command Level
Configure SNMP

Syntax
show target-params <name>

A character string representing the SNMP Target

name Address Name.
Valid entry: Character string - 0 to 64 characters

Guidelines
This command displays the target parameters entry for the specified Parameter Name.

Examples
ADVA--> configure snmp
ADVA:snmp--> show target-params GoForIt

Target Params Name : GoForIt

Message Processing Model : snmpv2c
Security Model : snmpv2c
Security Name : TestOne
Security Level : no-auth

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 806

Oscilloquartz: An ADVA Company Commands Reference

show telecom-slave
Display the configuration of the telecom slave.

Security Level
retrieve

Command Level
PTP Network Element

Configure Telecom Slave

Syntax
show telecom-slave
show telecom-slave <ts-eid>

The entity Identity of the Telecom Slave.

ts-eid Valid entry: ts-ne-n. Where: ne=1, n=1. Example: ts-
1-1.

Guidelines
This command is used to display the configuration of the telecom slave.

Examples
Example at the PTP Network Element level:
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> show telecom-slave ts-1-1

Alias : TS1
Clock Identity : 0080ea33b0a00000
Operational State : normal
Admin State : in-service
Secondary States : act
Sync Reference Mode : enabled
QL Mode : disabled
Sync ID : sync-1-1-1-1
PTP Domain Number : 2
Clock Recovery Mode : two-way
Clock Recovery State : normal
Network Clock Type : option2-sonet
Assumed QL : ql-stu
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : 2014-02-25,22:06:30
Time Holdover Accuracy (ns) : 5000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 807

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add telecom-slave clock-recovery-mode
show telecom-slave
admin-state delete telecom-slave
sync-id
alias expected-ql
sync-ref-mode
assumed-ql ql-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 808

Oscilloquartz: An ADVA Company Commands Reference

show threshold-data
Display the Performance Monitoring threshold values for an entity for the supplied interval.

Security Level
Retrieve

Command Level
Configure Access Port

Configure Dynamic Remote Slave

Configure PTP Flow Point - Access

Configure Static Remote Slave

Configure Syncjack

Syntax
show threshold-data <interval>

The PM Interval for which to retrieve the current

counts.
interval
Valid entry: 15min, 1day or 5min, 1day (depending
on the PM-Interval setting at NTE)

Guidelines
This command displays the Performance Monitoring threshold values for an entity for the
supplied interval. For valid entry, see Parameter Rules / Valid entries .

Examples
Example at the Configure Access Port command level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> pm
ADVA-NE-1:access-1-1-1-1:pm--> show threshold-data 15min

Interval Type : 15min

esbf : 0
esbp : 0
esbs : 0
esc : 0
escae : 37055
esde : 37055
esf : 37055

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 809

Oscilloquartz: An ADVA Company Commands Reference

esfs : 0
esj : 0
esmf : 0
esmp : 0
eso : 0
esof : 0
esop : 37055
esp : 0
esp64 : 0
esp65 : 0
esp128 : 0
esp256 : 0
esp512 : 0
esp1024 : 0
esp1519 : 0
esuf : 0
esup : 37055
l2cpfd : 0
l2cpfp : 0
les : 0
lbc : 0
opr : -80
opr-variance 4
opt : -80
opt-variance 4
abrrx : 0
abrtx : 0
aufd : 0
apfd : 0

Example at the Configure Syncjack command level for a clock probe:

ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-1
ADVA-NE-1:syncjack:clock_probe-1-1--> pm
ADVA-NE-1:syncjack:clock_probe-1-1:pm--> show threshold-data 1day

Interval Type : 1day

maxte : 0
maxconstantte : 0
mtie1s : 0
mtie10s : 0
mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Example at the Configure Syncjack command level for a PTP clock probe:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> pm
ADVA-NE-1:syncjack:ptp_clock_probe-1-1:pm--> show threshold-data 1day

Interval Type : 1day

maxte : 4
maxconstantte : 0
mtie1s : 0
mtie10s : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 810

Oscilloquartz: An ADVA Company Commands Reference

mtie100s : 0
mtie1000s : 0
mtie10000s : 0
mtie50000s : 0

Related Commands
clear all-history-data show curr-data
clear curr-data show history-data
clear history-data show perf-mon
set-threshold show threshold-data

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 811

Oscilloquartz: An ADVA Company Commands Reference

show time
Display the System Time and Date.

Security Level
Retrieve

Command Level
Any

Syntax
show time

Guidelines
This command displays the System Time and Date.

Examples
ADVA--> show time

Time : 2014-03-09,15:36:43

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

show time-available-refs
Display the entities available to be used as entries on the Time Reference list.

Security Level
Retrieve

Command Level
Configure Time Clock

Syntax
show time-available-refs

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 812

Oscilloquartz: An ADVA Company Commands Reference

Guidelines
This command is used to display the entities available to be used as entries on the Time
Reference list.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show time-available-refs
|----------------------------------------|
| sync-1-1-1-1 |
|----------------------------------------|

Related Commands
admin-state clear clear-lockout
clear-wtr expected-ql forced-switch
show time-available-
lockout selection-mode
refs
show timeref wtr-time

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 813

Oscilloquartz: An ADVA Company Commands Reference

show time-clock
Display Time Clock information.

Security Level
Provisioning

Command Level
Configure Network Element

Configure Time Clock

Syntax
show time-clock <timeclock-eid>
show time-clock

The Entity Identifier of a Time Clock.

timeclock-
eid Valid entry: time_clock-ne-shelf-nte-n; where: ne=1,
shelf=1, nte=1, n=1.Example: time_clock-1-1-1-1.

Guidelines
This command is used to display Time Clock information.

Examples
Example at the Configure Network Element level:
ADVA--> network-element ne-1
ADVA-NE-1--> show time-clock time_clock-1-1-1-1

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : none
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 814

Oscilloquartz: An ADVA Company Commands Reference

Current Time Of Day : Not Available

e-PRTC Mode Enabled : disabled

Example for Configure Time Clock level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : tracking
User Request Action :
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 96
Time Traceability Status : time-hold-over
Expected QL :
Current QL :
Time Scale : ptp
Time Holdover Performance :
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout show time-clock
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 815

Oscilloquartz: An ADVA Company Commands Reference

show timeref
Display Time Clock Reference information.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
show timeref <timeref-eid>

The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1

Guidelines
This command is used to display Time Clock Reference information.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-2

Alias :
Priority : 2
Source : ts-1-1
Status : ref-ok
State : standby

Related Commands
add timeref delete timeref
priority (sync/timeclock) show time-clock
time-ref-alias

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 816

Oscilloquartz: An ADVA Company Commands Reference

show time-zone
View the time zone configuration.

Security Level
retrieve

Command Level
Time Zone

Syntax
show time-zone

Guidelines
This command is used to view the time zone configuration.

Examples
Example of displaying the time zone configuration:
ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:timezone--> show time-zone

UTC Offset : +00:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 00:00
DST EndTime : 02:00

Related Commands
dst-control
dst-start-month
dst-end-day
dst-start-time
dst-end-month
dst-utc-offset
dst-end-time
utc-offset
dst-start-day

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 817

Oscilloquartz: An ADVA Company Commands Reference

show tod-port
Display the output Time Of Day & PPS configuration.

Security Level
retrieve

Command Level
Configure NTE

Configure TOD & PPS Port

Syntax
show tod-port <tod_port-eid>
show tod-port

Time Of Day port ID.

tod_port-eid Valid entry: tod_port-eid-ne-shelf-nte-n,Where:
ne=1,shelf=1,nte=1n=1.Example: tod-1-1-1-1

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> show tod-port tod-1-1-1-1

Admin State : unassigned

Operational State : outage
Alias :
Squelch Control : never
Output Format : nmea
Signal Direction type : output
Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1-1

Related Commands
admin-state squelch-ctrl
alias signal-direction (tod-port)
delay-compensation source-eid

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 818

Oscilloquartz: An ADVA Company Commands Reference

show trace-route-result
Display the result of the last trace-route Request.

Security Level
retrieve

Command Level
Any

Syntax
show trace-route-result

Guidelines
This command displays the result of the last trace-route Request.

Examples
ADVA--> configure communication
ADVA:comms--> trace-route 172.17.23.22
ADVA:comms--> show trace-route-result

--- 172.17.23.22 Trace Route Results ---

1: 172.17.23.22 (172.17.23.22) 1.103ms pmtu 16436
1: 172.17.23.22 (172.17.23.22) 0.581ms reached
Resume: pmtu 16436 hops 1 back 1

Related Commands
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

show user-mtie-mask
Display the configuration of the custom MTIE mask.

Command Level
User MTIE Mask Configuration

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 819

Oscilloquartz: An ADVA Company Commands Reference

Syntax
show user-mtie-mask

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure user-mtie-mask
ADVA-NE-1:syncjack:user-mtie-mask--> config user-mtie-mask user_mtie_mask-1-1
ADVA-NE-1:syncjack:user_mtie_mask-1-1--> show user-mtie-mask
Mask Name : UserDefinedMti
X,Y Display Points : 0.05,2300;0.1,4600;0.2,9000;32,9000;38,10640;45,12600;50,14000;55,
15400;64,17920;100,18000;1000,18000
Measurement Points :
4600,9000,9000,9000,9000,9000,9000,9000,14000,18000,18000,18000,18000,
NA,NA,NA,NA,NA,NA

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 820

Oscilloquartz: An ADVA Company Commands Reference

show usm-user
Display the USM user configuration parameters.

Security Level
superuser

Command Level
Configure SNMP

Syntax
show usm-user <name> <engine-id>

A human readable string representing the name of

name the USM User.
Valid entry: Character string - 0 to 64 characters
An SNMP engine's administratively-unique identifier.
In a simple agent, this value is always that agent’s
own snmpEngineID value.
engine-id
Valid entry: Character string - 5 to 32 characters.
Enter ‘local’ for Local Engine ID or full remote Engine
ID.

Guidelines
This command displays the usm user configuration parameters.

Examples
ADVA--> configure snmp
ADVA:snmp--> show usm-user McCracken local

User Name : McCracken

User Engine Id : Wrong engineId
User Security Name : secret
User Auth Protocol : no-auth-protocol
User Priv Protocol : no-priv-protocol
User Access Type : readwrite
User Auth Key : *****
User Priv Key : *****
User Security Level : no-auth

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 821

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add community show all-notify-entries
add target-address show all-target-addresses
add target-params show all-target-params
add usm-user show all-usm-users
configure usm-user-auth-key show community
configure usm-user-priv-key show notify-entry
delete community show target-address
delete target-address show target-params
delete target-params show usm-user
delete usm-user snmp-dying-gasp
show all-communities

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 822

Oscilloquartz: An ADVA Company Commands Reference

signal-direction (pps-port)
Configure the signal direction of a 10 MHz or PPS port.

Security Level
Provisioning

Command Level
Configure PPS Port

Configure 10MHZ Port

Syntax
signal-direction <direction>

Set the signal direction.

direction
Valid entry: input, output.

Guidelines
This command is used to configure a PPS port or 10MHZ port as either an input or output.

Only pps-1-1-1-2 and 10mhz-1-1-1-2 can be configured as outputs.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa54221-1-1--> configure pps-port pps-1-1-1-2
ADVA-NE-1:pps-1-1-1-2--> signal-direction output
ADVA-NE-1:pps-1-1-1-2--> back
ADVA-NE-1:nteosa-1-1-1--> show pps-port pps-1-1-1-2
Admin State : unassigned
Operational State : outage
Alias :
Signal Direction type : output
Squelch Control : never
Input Rate :
Cable Delay Compensation, (ns) : 24

Related Commands
admin-state signal-direction (pps-port)
alias show 10mhz-port
delay-compensation show pps-port
input-rate squelch-ctrl

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 823

Oscilloquartz: An ADVA Company Commands Reference

signal-direction (tod-port)
Configure the signal direction for this interface.

Security Level
Provisioning

Command Level
Configure TOD & PPS Port

Syntax
signal-direction <direction>

Set the signal direction.

direction
Valid entry: input, output.

Guidelines
This command is used to configure a TOD & PPS port as either an input or output.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure tod-port tod-1-1-1-1
ADVA-NE-1:tod-1-1-1-1--> signal-direction output
ADVA-NE-1:tod-1-1-1-1--> back
ADVA-NE-1:nteosa5422-1-1-1--> show tod-port tod-1-1-1-1

Admin State : unassigned

Operational State : outage
Alias :
Squelch Control : never
Output Format : nmea
Signal Direction type : output
Input Rate : pulse-per-sec
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1-1

Related Commands
admin-state squelch-ctrl
alias show tod-port
delay-compensation source-eid

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 824

Oscilloquartz: An ADVA Company Commands Reference

slave-ipv4-address
Configure the slave address of a PTP Clock Probe or PTP Network Probe.

Security Level
Provisioning

Command Level
Configure PTP Clock Probe

Configure PTP Network Probe

Syntax
For PTP Clock Probe or PTP Network Probe:

slave-ipv4-address <slave-address>

slave- The slave address of an SOOC or Syncjack probe.

address Valid entry: a valid IPv4 address.

Guidelines
This command is used to configure the slave address of a PTP Clock Probe or a PTP Network
Probe.

Examples
Example at the PTP Clock Probe level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure ptp-clock-probe ptp_clock_probe-1-1
ADVA-NE-1:syncjack:ptp_clock_probe-1-1--> slave-IpAddress 100.100.10.0
ADVA-NE-1:syncjack:clock-analysis--> show ptp-clock-probe ptp_clock_probe-1-1

Name : PtpClockProbe1
Current State : running
Reference Failure : no
No Time Stamp Failure : no
No Event Message Failure : no
Ptp Flowpoint : acc_ptp_flow_pt-1-1-1-1-5
IP Version : ipv4
Slave Ip Address : 100.100.10.0
Master Ip Address : 123.123.123.1
Direction : master-to-slave
Reference Eid : time_clock-1-1-1-1
Expected QL : ql-none
MTIE MaskType : g8272-prtc
MTIE Mask Margin, (%) : 0
Raw Data Collection : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 825

Oscilloquartz: An ADVA Company Commands Reference

Measurement Type : phase

Delay Compensation, (ns) : 0
Running Failed Count : 0
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed Time : N/A
Last TIE Result, (ns) : -24
Time of last TIE Result : 1970-01-01,14:03:32
Actual Test Start Time : 1970-01-01,00:43:04
Actual Test Duration, (s) : 48036
Max TE Threshold, (ns) : 0
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (ns) : 0
Max TE Measurement Time, (ns) : 0
Const TE Threshold, (ns) : 0
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
Inst TE Threshold, (ns) : 0
Inst TE Clear Threshold, (ns) : 0
Inst TE Total Alarm Time, (s) : 0
Inst TE Measurement Time, (s) : 0
Scheduler Eid : syncjack_schedule-1-1-1-1
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | No Mask | No Mask |
| 0.2s | N/A | No Mask | No Mask |
| 0.5s | N/A | No Mask | No Mask |
| 1.0s | N/A | No Mask | No Mask |
| 2.0s | N/A | No Mask | No Mask |
| 5.0s | N/A | No Mask | No Mask |
| 10.0s | 6 | OK | OK |
| 20.0s | 6 | OK | OK |
| 50.0s | 9 | OK | OK |
| 100.0s | 12 | OK | OK |
| 200.0s | 17 | OK | OK |
| 500.0s | 28 | OK | OK |
| 1000.0s | 34 | OK | OK |
| 2000.0s | 34 | OK | OK |
| 5000.0s | 34 | OK | OK |
| 10000.0s | 37 | OK | OK |
| 20000.0s | 38 | OK | OK |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
master-priority
master-syncrcp-timeout
add ocs-port
priority-mode
admin-state
priority-mode-value
alias
show last-rcv-sync-msg
delete ocs-port
show ocs-port
master-announce-rcpt-timeout
show perf-mon
master-ip-address
unicast-restart-timer
unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 826

Oscilloquartz: An ADVA Company Commands Reference

snmp-dying-gasp
Enable or disable SNMP Dying Gasp function.

Security Level
Provisioning

Command Level
Configure NTE

Configure SNMP

Syntax
snmp-dying-gasp <control>

Enable or Disable SNMP Dying Gasp support for this

control NE.
Valid entry: enabled, disabled;Default is disabled

Guidelines
Set the port speed for this port. For valid entry, see Parameter Rules / Valid entries.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> snmp-dying-gasp enabled
ADVA-NE-1:nteosa5422-1-1-1--> show nte
Admin State : in-service
Operational State : normal
Secondary States : act
Card Type : nteosa5422
Alias :
SNMP Dying Gasp : enabled
Voltage (mV) : 13000
Temperature (deg C) : 40
Physical Entity Name : OSA 5422
MAC Address : 00:80:ea:2f:c0:70
Software Revision : 10.5.1-352
Firmware Revision : 218f8
Hardware Revision : 01.01
USI : LBADVA71123306990
CLEI Code : PENDING
Part Number : 1078904673-01
Manufacturer Date : 2015-02-26
Manufacturer Site : Shenzhen

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 827

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state
show bits-out
alias
show gps-port
reboot
show network-element
show 10mhz-port
show nte
show access-port
show pps-port
show bits-in

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 828

Oscilloquartz: An ADVA Company Commands Reference

snmp-engine-id
Change the User SNMP Engine ID.

Security Level
superuser

Command Level
Configure System

Syntax
snmp-engine-id <engine-id>

Enter the user SNMP Engine ID - up to 64 characters.

engine-id
Valid entry: Must be 12 octets long (first bit is 0)

Guidelines
This command is used to change the user SNMP Engine ID in the system. A valid entry must
be 12 octets long.

Examples
ADVA--> configure system
ADVA:system--> snmp-engine-id 800009f0030080ea39d2c0
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea39d2c0
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 829

Oscilloquartz: An ADVA Company Commands Reference

Local Time : 2018-01-08,10:46:05

System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

source-eid
Configure the source EID of a Syncjack probe, PPS Port 2, or TOD & PPS Port.

Security Level
Provisioning

Command Level
Configure Clock Probe

Configure PPS Port

Configure TOD & PPS Port

Syntax
source-eid <source_port-eid>

Identifies the source port for Clock Probe.

Valid entry: Available references, see the OSA 5422 Provisioning
and Operations Manual.
source_port-eid
Identifies the source port for TOD & PPS Port or PPS Port 2.
Valid entry: Equipment and Entity Identifier (EID) Naming
Conventions

Guidelines
This command is used to configure the source port EID for a Syncjack probe or TOD Port.
The source port EID can not be edited if the clock probe belongs to an active schedule.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 830

Oscilloquartz: An ADVA Company Commands Reference

Examples
Example at the Configure Clock Probe level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> source-eid time_clock-1-1-1-1
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : phase
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10
Time of last TIE Result : 1970-01-07,03:49:33
Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 831

Oscilloquartz: An ADVA Company Commands Reference

| 10000.0s | N/A | N/A | N/A |

| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Example at the Configure TOD Port level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure tod-port tod-1-1-1-1
ADVA-NE-1:tod-1-1-1-1--> source-eid time_clock-1-1-1-1
ADVA-NE-1:tod-1-1-1-1--> show tod-port

Admin State : unassigned

Operational State : outage
Alias :
Squelch Control : squelch-ql
Squelch QL : ql-none
Source Eid : time_clock-1-1-1-1

Example for the Configure PPS Port 2:

ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure pps-port pps-1-1-1-2
ADVA-NE-1:pps-1-1-1-2--> source-eid time_clock-1-1-1-1
ADVA-NE-1:pps-1-1-1-2--> show pps-port

Admin State : unassigned

Operational State : outage
Alias :
Signal Direction type : output
Squelch Control : lock
Input Rate :
Cable Delay Compensation, (ns) : 0
Source Eid : time_clock-1-1-1-1

Related Commands
for Clock Probe
mtie-mask-margin
add clock-probe
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

Related Commands for TOD Port

admin-state signal-direction (tod-port)
alias source-eid
delay-compensation squelch-ctrl
show tod-port

Related Commands for PPS Port 2

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 832

Oscilloquartz: An ADVA Company Commands Reference
admin-state signal-direction (pps-port)
alias source-eid
show pps-port squelch-ctrl

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 833

Oscilloquartz: An ADVA Company Commands Reference

source-type
Configure the source type of a Syncjack probe.

Security Level
Provisioning

Command Level
Configure Clock Probe

Syntax
source-type <source-type>

Clock Probe source type.

source-type
Valid entry: frequency, phase.

Guidelines
This command is used to configure the source type for a Syncjack probe. The source type
can not be edited if the clock probe belongs to an active schedule.

Examples
Example for a clock probe:
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-accuracy
ADVA-NE-1:syncjack:clock-accuracy--> configure clock-probe clock_probe-1-2
ADVA-NE-1:syncjack:clock_probe-1-2--> source-type frequency
ADVA-NE-1:syncjack:clock_probe-1-2--> back
ADVA-NE-1:syncjack:clock-accuracy--> show clock-probe clock_probe-1-2
Name : ClockProbe2
Current State : not-scheduled
Source Failure : no
Reference Failure : no
MTIE Mask Failed : no
MTIE Mask Margin Failed : no
Reference Eid : gps-1-1-1-1
Expected QL : ql-none
Source Eid : time_clock-1-1-1-1
Source Type : frequency
Measurement Rate,
(measurements/s) : 1
MTIE MaskType : g823-pdh
MTIE Mask Margin, (%) : 0
Raw Data Collection : disabled
Measurement Type : phase
MTIE Mask Crossed Time : N/A
MTIE Mask Margin Crossed
Time : N/A
Last TIE Result, (ns) : -10

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 834

Oscilloquartz: An ADVA Company Commands Reference

Time of last TIE Result : 1970-01-07,03:49:33

Actual Test Start Time : N/A
Actual Test Duration, (s) : 0
Scheduler Eid : none
Running Failed Count : 0
Max TE Threshold, (ns) : 60
Max TE Clear Threshold, (ns) : 0
Max TE Total Alarm Time, (s) : 0
Max TE Measurement Time, (s) : 0
Const TE Threshold, (ns) : 50
Const TE Clear Threshold (ns) : 0
Const TE Total Alarm Time, (s) : 0
Const TE Measurement Time, (s) : 0
Const TE Window, (s) : 1000
MTIE Reset Control : enabled
|Time int. (s)| MTIE (ns) | Mask status| Mask Margin status |
|-------------|-----------|------------|--------------------|
| 0.1s | N/A | N/A | N/A |
| 0.2s | N/A | N/A | N/A |
| 0.5s | N/A | N/A | N/A |
| 1.0s | N/A | N/A | N/A |
| 2.0s | N/A | N/A | N/A |
| 5.0s | N/A | N/A | N/A |
| 10.0s | N/A | N/A | N/A |
| 20.0s | N/A | N/A | N/A |
| 50.0s | N/A | N/A | N/A |
| 100.0s | N/A | N/A | N/A |
| 200.0s | N/A | N/A | N/A |
| 500.0s | N/A | N/A | N/A |
| 1000.0s | N/A | N/A | N/A |
| 2000.0s | N/A | N/A | N/A |
| 5000.0s | N/A | N/A | N/A |
| 10000.0s | N/A | N/A | N/A |
| 20000.0s | N/A | N/A | N/A |
| 50000.0s | N/A | N/A | N/A |
| 100000.0s | N/A | N/A | N/A |

Related Commands
mtie-mask-margin
add clock-probe
mtie-mask-type
delete clock-probe
mtie-restart
delete history-result
name (ne, probe)
show clock-probe
reference, reference-eid
show history-result
source-eid
expected-ql
source-type

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 835

Oscilloquartz: An ADVA Company Commands Reference

speed
Set the port speed for this port.

l For DCN default is auto; 1000-full and auto-1000-full, are not valid.
l For access port only 10g-full, 1000-full, and auto-1000-full are valid.

Command Level
Configure access port

Configure DCN

Configure line card

Syntax
speed <if-speed>

Set the port speed.

if-speed Valid values: 10-full, 10g-full, 10-half, 100-full, 100-half, 1000-full,

auto, auto-10-full, auto-10-half, auto-100-full, auto-100-half, auto-
1000-full; Default is auto-1000-full.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure dcn dcn-1-1-1-1
ADVA-NE-1:dcn-1-1-1-1--> speed auto
ADVA-NE-1:dcn-1-1-1-1--> show dcn
Admin State : in-service
Operational State : normal
Secondary States : act
Alias :
MAC Address : 00:80:ea:2f:c0:70
MTU (bytes) : 1500
Media Type : copper
Max Port Speed : 100000000
Configured Port Speed : auto
Negotiated Port Speed : auto-100-full
MDIX Control : auto
MDIX Status : uncrossed

spoofing-squelch-control
If the GNSS port is used for time clock reference and you enable this option, a detected
spoofing condition causes GNSS port failure.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 836

Oscilloquartz: An ADVA Company Commands Reference

Command Level
configure gps-port

Syntax
spoofing-squelch-control <disabled|enabled>

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa542-1-1-1
ADVA-NE-1:nteosa5412-1-1-1--> configure gps-port gps-1-1-1-1
ADVA-NE-1:gps-1-1-1-1--> spoofing-squelch-control enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 837

Oscilloquartz: An ADVA Company Commands Reference

squelch-ctrl
Configures how the output is squelched on a time output interface.

l NEVER, where the output is never squelched

l HOLDOVER, where output is squelched only in freerun state
l LOCK, where output is squelched in holdover and freerun states
l Squelch QL, where output is squelched only based on Squelch QL

For PPS and 10MHZ, squelch control only applies to pps-1-1-1-2 or 10mhz-1-1-1-2 when
the interface is configured as an output (see signal-direction (pps-port)).

Command Level
Configure 10MHZ Port

Configure PPS Port

Configure TOD Port

Configure clk-x4-port-group

Configure clkx16_group

Syntax
squelch-ctrl <option>

Configure the squelch control operation.

option
Valid values: holdover, lock, never, squelch-ql; Default value: never

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure 10mhz-port clk-1-1-1-2
ADVA-NE-1:clk-1-1-1-2--> signal-direction output
ADVA-NE-1:clk-1-1-1-2--> squelch-ctrl lock
ADVA-NE-1:clk-1-1-1-2--> show 10mhz-port
Admin State : unassigned
Operational State : outage
Secondary States : uas
Alias :
Signal Direction type : output
Squelch Control : lock
Squelch QL : ql-none
Assumed QL :
Current QL :

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 838

Oscilloquartz: An ADVA Company Commands Reference

squelch-ql
Sets the squelch quality level for an interface.

Indicates the minimum quality level to be transmitted via the output interface. For BITS Out
interface: Only effective if the QL Mode for BITS Out is set to enabled. Choices available
depend on the “network-clock-type" setting - “option1-sdh" or “option2-sonet". If the
“network-clock-type" is changed, “squelch-ql" defaults to “ql-eec1" regardless of previous
setting. If the “squelch-ql" is set to anything other than “ql-none" and the system clock’s
quality level falls below the “squelch-ql" setting, the BITS Out port is turned off and a QL
Squelch alarm is raised.

Command Level
Configure BITS Out

Configure PPS Port

Configure 10MHZ (Clock) Port

Configure clk-x4-port-group

Configure clkx16_group

Syntax
squelch-ql <ql-level>

The Squelch Quality Level.

ql-level Valid values: ql-dnu, ql-eec1, ql-eec2, ql-none, ql-prc, ql-prov, ql-
prs, ql-prs, ql-smc, ql-ssu-a, ql-ssu-b, ql-st2, ql-st3e, ql-stu, ql-tnc.
Default is ql-eec1.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure bits-out bits_out-1-1-1-1
ADVA-NE-1:bits_out-1-1-1-1--> squelch-ql ql-ssu-a
ADVA-NE-1:bits_out-1-1-1-1--> show bits-out bits-out-1-1-1-1

Alias :
Admin State : unassigned
Operational State : outage
Secondary State : uas
Line Type : e1
Line Code : e1-hdb3
Frame Format : e1-crc4
SA Bit : bit4
QL Mode : disabled
Squelch QL : ql-ssu-a
Transmit QL : ql-dnu

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 839

Oscilloquartz: An ADVA Company Commands Reference

Line Build Out : none

Related Commands
admin-state show alarm-attributes
frame-format (bits)
alias show bits-in
line-code
assumed-ql show bits-out
ql-mode
bits-line-type squelch-ql
sa-bit
expected-ql

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 840

Oscilloquartz: An ADVA Company Commands Reference

ssh
Enable or Disable Secure Shell (SSH) protocol for the system.

Security Level
Provisioning

Command Level
Configure System

Syntax
ssh <control>

Enable or Disable SSH Protocol.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable SSH for the system. If enabled, the user can
access the system through an SSH connection.

Examples
ADVA--> configure system
ADVA:system--> ssh enable
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 841

Oscilloquartz: An ADVA Company Commands Reference

Local Time : 2018-01-08,10:46:05

System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

state
Setting for state name for a provisioned SSL Certificate.

Security Level
superuser

Command Level
Configure User Security

Syntax
state <state>

Enter the state name for the SSL Certificate.

state
Valid entry: up to 128 ASCII characters

Guidelines
This command sets the state name for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> state Texas
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 842

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 843

Oscilloquartz: An ADVA Company Commands Reference

svlan-control
Enable or Disable S-tag VLAN Control on a management tunnel.

Security Level
Provisioning

Command Level
Configure Management Tunnel

Syntax
svlan-control [enabled | disabled]

Guidelines
This command is used to enable or disable S-tag VLAN control on a management tunnel.
Default value is disabled.

Examples
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> svlan-control disabled
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 844

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 845

Oscilloquartz: An ADVA Company Commands Reference

svlan-id
Configure the S-tag VLAN ID of a management tunnel. The S-tag value is ineffectual if
svlan-control is disabled. Default value is 4095.

Security Level
Provisioning

Command Level
Configure Management Tunnel

Syntax
svlan-id <S-VLAN-ID>

VLAN ID.
S-VLAN-ID
Valid entry: 0 to 4095

Examples
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> svlan-id 4095
ADVA:comms:mgmt_tnl-1--> show mgmttnl
IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
...

Related Commands
svlan-id

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 846

Oscilloquartz: An ADVA Company Commands Reference

swap-sada
Configure the system to swap the source and destination addresses on looped-back frames.

Command Level
LPBK

Syntax
swap-sada <sada>

Source Address and Destination Address. Indicates if the Source

sada and Destination address should be swapped.
Valid values: none, sada, swap-da-overrides-sa; Default is none.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure nte nteosa5422-1-1-1
ADVA-NE-1:nteosa5422-1-1-1--> configure access-port
access-1-1-1-1
ADVA-NE-1:access-1-1-1-1--> lpbk
ADVA-NE-1:access-1-1-1-1:lpbk--> swap-sada sada
ADVA-NE-1:access-1-1-1-1:lpbk--> show lpbk-params

Loopback VLAN 1 : 4094-0

Loopback VLAN 1 - Enabled : disabled
Loopback VLAN 2 : 4094-1
Loopback VLAN 2 - Enabled : disabled
Loopback VLAN 3 : 4094-2
Loopback VLAN 3 - Enabled : disabled
Loopback Type : facport
Loopback Status : none
Loopback Timer : 10
Swap SADA : sada

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 847

Oscilloquartz: An ADVA Company Commands Reference

switch-server
Switch from the specified Network Time Protocol Client (NTP) server.

Security Level
Provisioning

Command Level
NTP Client

Syntax
switch-server <server>

The server to switch from.

server
Valid entry: primary, secondary.

Guidelines
This command is used to switch from the specified NTP server.

Examples
ADVA:system--> ntp-client
ADVA:system:ntp_client--> switch-server secondary
ADVA:system:ntp_client--> show ntp-client

Primary Server IP Version : ipv4

Primary Server IPv4 Address : 192.168.179.110
Primary Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
Backup Server IP Version : ipv4
Backup Server IPv4 Address : 193.204.114.232
Backup Server IPv6 Address : 0000:0000:0000:0000:0000:0000:0000:0000
NTP Type : unicast
NTP Client : enabled
Active Server : secondary
Round-trip delay to NTP server (micro secs) : 258
NTP server precision (micro secs) : 1000001
Polling interval (seconds) : 16

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 848

Oscilloquartz: An ADVA Company Commands Reference

sym-key-authentication
Configures MD5 or SHA1 authentication for NTP clock. When enabled, configure the
authentication keys in the key-entities command.

Command Level
Configure NTP Clock

Syntax
sym-key-authentication enabled|disabled

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> config ntp-clock ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1-->
ADVA:ntp-NE-1:ntp_clock-1-1--> sym-key-authentication enabled

Related Commands
add ntp-clock, mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 849

Oscilloquartz: An ADVA Company Commands Reference

sync-alias
Enter an Alias for the Sync subsystem.

Security Level
Provisioning

Command Level
Configure Sync

Syntax
sync-alias <sync-alias>

A character string representing the Alias of the

sync-alias entity.
Valid entry: String (0 to 256 characters)

Guidelines
This command is used modify the Network Element Name attribute. For valid entry, see
Parameter Rules / Valid entries .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> sync-alias doc-cube
ADVA-NE-1:sync-1-1-1-1--> show sync
Alias : doc-cube
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : network-1-1-1-1
Clock Mode : locked
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 850

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 851

Oscilloquartz: An ADVA Company Commands Reference

sync-e-mode
Enable or disable Sync-E feature on an access port. If enabled, this interface syncs to the
system clock and may be used as the reference source for the system clock. also, when you
enable Sync-E Mode, you can also enable QL Mode for sync status messaging.

Command Level
Configure Access Port

Syntax
sync-e-mode <control>

control Valid values: enabled or disabled. The default is enabled.

Examples
ADVA 1---> network-element ne-1
ADVA 1--NE-1--> configure nte nteosa5422-1-1-1
ADVA 1--NE-1:nteosa5422-1-1-1--> configure network-port network-1-1-1-1
ADVA 1--NE-1:network-1-1-1-1--> sync-e-mode enabled
ADVA 1--NE-1:network-1-1-1-1--> ql-mode enabled
ADVA 1--NE-1:network-1-1-1-1--> show network-port
Admin State : in-service
Operational State : outage
Secondary States : act,faf
Alias :
MAC Address : 00:80:ea:2f:c0:71
MTU (bytes) : 9612
Max Port Speed : 0
Configured Port Speed : auto-1000-full
Negotiated Port Speed : negotiating
Media Type : fiber
MDIX Control : Not Applicable
MDIX Status : Not Applicable
SFP Vendor Name : ADVA
SFP Part Number : 0061003008
SFP Serial Number : EOPW110200360
SFP Mfg Date : 2014-01-08
SFP Connector Type : lc
SFP Link Length (m) : 10000
SFP Media Type : single-mode
SFP Laser Wave Length (nm) : 1310
QinQ Ethertype : N/A
QinQ Ethertype Override : disabled
Port Shaping Enabled : disabled
Port Shaped Speed : 0
Drop Eligibility Indicator : enabled
Loopback outer VLAN 1 : 4094-0
Loopback outer VLAN 1 Control : disabled
Loopback outer VLAN 2 : 4094-1
Loopback outer VLAN 2 Control : disabled
Loopback outer VLAN 3 : 4094-2
Loopback outer VLAN 3 Control : disabled
Loopback inner VLAN 1 : 4094-0
Loopback inner VLAN 1 Control : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 852

Oscilloquartz: An ADVA Company Commands Reference

Loopback inner VLAN 2 : 4094-1

Loopback inner VLAN 2 Control : disabled
Loopback inner VLAN 3 : 4094-2
Loopback inner VLAN 3 Control : disabled
Loopback Type : none
Loopback Status : none
Loopback Timer : 10
Swap SADA : none
Sync-E Mode : enabled
QL Mode : enabled
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL : ql-failed
Transmit QL : ql-eec1
Auto Diagnostic : disabled

Related Commands
admin-state show bits-out
alias line-code show access-port
assumed-ql network-clock-type
bits-line-type sa-bit squelch-ctrl
clock-recovery-mode show alarm-attributes squelch-ql
expected-ql show bits-in sync-e-mode
frame-format (bits)

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 853

Oscilloquartz: An ADVA Company Commands Reference

sync-id
Configure the synchronization domain.

Security Level
Provisioning

Command Level
Configure Telecom Slave

Syntax
sync-id <sync-eid>

Entity Identifier of the synchronization domain

sync-eid
Valid entry: sync-1-1-1-1, none

Guidelines
This command is used to configure the synchronization domain.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-99--> sync-id sync-1-1-1-1
ADVA:ptp-NE-1:ts-1-99--> show ts
Alias : doctest1
Clock Identity : 0080ea2fc0700000
Operational State : outage
Admin State : management
Secondary States : sgeo
Sync Reference Mode : disabled
QL Mode : disabled
Sync : sync-1-1-1-1
PTP Domain Number : 0
Clock Recovery Mode : two-way
Clock Recovery State :
Network Clock Type : option1-sdh
Assumed QL : ql-eec1
Expected QL : ql-none
Received QL :
Squelch Control :
Packet Clock Selected : none
Current Time of Day : Not Available

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 854

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
admin-state
expected-ql squelch-ctrl
alias
network-clock-type squelch-ql
assumed-ql
show alarm-attributes sync-e-mode
clock-recovery-mode
show telecom-slave

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 855

Oscilloquartz: An ADVA Company Commands Reference

sync-receipt-timeout
Configure Sync Receipt Timeout of a PTP Port in seconds.

Security Level
Provisioning

Command Level
Configure PTP Port

Syntax
sync-receipt-timeout <msg-rate>

Delay Response Timeout in second2.

msg-rate
Valid entry: 2-128

Guidelines
This command is used to configure the Sync Receipt Timeout of a PTP Port.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure ptp-clock ptp_clock-1-1
ADVA:ptp-NE-1:ptp_clock-1-1--> configure ptp-port ptp_port-1-1-1
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> sync-receipt-timeout 3
ADVA:ptp-NE-1:ptp_clock-1-1:ptp_port-1-1-1--> show ptp-port
Admin State : management
Operational State : normal
Secondary States : act
Alias :
Master Clock Type : one-step

Not Slave : Enabled

Peer Port Identity :
Local Priority : 128
PTP Flowpoint : net_ptp_flow_pt-1-1-1-1-1
Tx Dest MacAddr : forwardable
Sync Message Rate : 16-pkt-per-sec
Delay Req-Resp Message Rate : 16-pkt-per-sec
Announce Message Rate : 8-pkt-per-1-sec
Announce Receipt Timout : 3
Sync Receipt Timout : 3
Delay Resp Timout : 3
Expected Clock Class : 247
Max Expected L2 Slaves : 1
Probing Slave : Disabled
PTP State : master
BMCA Role : m2
Peer Clock Class : 0
Peer MacAddress : 00:80:ea:39:d1:51

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 856

Oscilloquartz: An ADVA Company Commands Reference

Last Announce Message Received :

00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000
Last Sync Message Received :
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Last Delay_Resp Message Received :
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000
Last Delay-Req Message Received :
0102002C180000000000000000000000000000000080EA05001000010000A1DC017F0000000ACD090254F000
Port Identity : 0080ea39d15000010001

Related Commands
add ptp-port
localpriority
admin-state
min-exp-clk-cls
alias
show ptp-clock
announce-receipt-timeout
show ptp-port
delay-response-timeout
sync-receipt-timeout
delete ptp-port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 857

Oscilloquartz: An ADVA Company Commands Reference

sync-ref-alias
Enter an Alias for a Sync Reference.

Security Level
Provisioning

Command Level
Configure Sync

Syntax
sync-ref-alias <syncref-eid> <alias>

The Entity Identifier of the Interface Port that is being

used as the syncref.
syncref-eid Valid entry: syncref-ne-shelf-slotnumber-syncref
index, Where: ne=1, shelf=1, slotnumber=1syncref
index=1-2.Example: syncref-1-1-1-1
A character string (0 to 256 characters) representing
the Alias of the entity.
Valid entry: Character string - 0 to 256 characters, no
alias space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.

Guidelines
This command is used modify the Sync Reference Alias. For valid entity identifiers, see
Equipment / Entity IDs .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> sync-ref-alias syncref-1-1-1-1-1 bits
ADVA-NE-1:sync-1-1-1-1--> show syncref syncref-1-1-1-1-1
Alias : bits
Priority : 2
Source : bits_in-1-1-1-1
Status : ref-failed
Received QL : ql-nsupp
State : unavailable
Effective QL : ql-failed

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 858

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 859

Oscilloquartz: An ADVA Company Commands Reference

sync-ref-candidate
Enable/Disable use of Time Clock as Sync Reference Input.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
sync-ref-candidate <control>

Enable/Disable use of Time Clock as Sync Reference

control Input.
Valid entry: enabled, disabled; Default is disabled.

Guidelines
This command is used to Enable/Disable use of Time Clock as Sync Reference Input.

Examples
Example of disabling the Time Clock as a Sync Reference Input:
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> sync-ref-candidate disabled
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias :
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : tracking
User Request Action :
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 96
Time Traceability Status : time-hold-over
Expected QL :
Current QL :
Time Scale : ptp
Time Holdover Performance :
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 860

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 861

Oscilloquartz: An ADVA Company Commands Reference

sync-ref-mode
Enable or disable use of this Telecom Slave as a sync reference.

Security Level
Provisioning

Command Level
Configure Telecom Slave

Syntax
sync-ref-mode <sync-ref-mode>

Enable or disable use of this Telecom Slave as a sync

sync-ref- reference. If set to disabled, the EID identified in the
mode Sync ID is used.
Valid entry: enabled, disabled.

Guidelines
This command is used to configure the synchronization domain.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> sync-ref-mode enabled
ADVA:ptp-NE-1--> show telecom-slave ts-1-1
Alias : TS1
Clock Identity : 0080ea33b0a00000
Operational State : normal
Admin State : in-service
Secondary States : act
Sync Reference Mode : enabled
QL Mode : disabled
Sync ID : sync-1-1-1-1
PTP Domain Number : 2
Clock Recovery Mode : two-way
Clock Recovery State : normal
Network Clock Type : option2-sonet
Assumed QL : ql-stu
Expected QL : ql-none
Received QL : ql-inv
Squelch Control :
Packet Clock Selected : sooc-1-1-1
Current Time of Day : 2014-02-25,22:06:30
Time Holdover Accuracy (ns) : 5000

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 862

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add telecom-slave clock-recovery-mode
show telecom-slave
admin-state delete telecom-slave
sync-id
alias expected-ql
sync-ref-mode
assumed-ql ql-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 863

Oscilloquartz: An ADVA Company Commands Reference

sys-def-gateway
Configure the System Default Gateway IP Address.

Security Level
Provisioning

Command Level
Configure Communications

Configure Management Tunnel

Syntax
configure eth0 sys-def-gateway <def-gateway>

or

sys-def-gateway <def-gateway>

IP address of the System Default Gateway.

def-gateway
Valid entry: A valid IP address.

Guidelines
This command is used to configure the System Default Gateway IP address. The system
supports configuration of a System Default Gateway. It can be associated with the
Management LAN port (eth0) or a Management Tunnel.

Configuration of the System Default Gateway creates a static route entry that is also
manageable by accessing the route table. The same rules for creating a default static route
on an interface also apply to the creation of a default gateway on an interface.

The static route created for the System Default Gateway has these values:
o
Destination IP address = 0.0.0.0
o
Subnet Mask = 0.0.0.0
o
Gateway IP Address = System Default Gateway value
o
Interface Name = interface matching the subnet for the Gateway IP Address
o
Metric = 0
o
Advertise Route = Disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 864

Oscilloquartz: An ADVA Company Commands Reference

Examples
For eth0:
ADVA--> configure communication
ADVA:comms--> configure eth0 sys-def-gateway 172.17.23.1
ADVA:comms--> show eth0

Name : eth0
IP Address : 172.17.23.30
Netmask : 255.255.255.0
DHCP Role : dhcp-client
DHCP : enabled
RIPv2 : disabled
MTU (bytes) : 1500
MAC Address : 00:80:ea:15:02:b0
System Default Gateway : 172.17.23.1

For a Management Tunnel:

ADVA:--> configure communication
ADVA:comms--> configure mgmttnl ?

mgmt_tnl-1 Enter the management tunnel

ADVA:comms--> configure mgmttnl mgmt_tnl-1

ADVA:comms:mgmt_tnl-1--> sys-def-gateway 10.20.32.1
ADVA:comms:mgmt_tnl-1--> show mgmttnl

IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 865

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 866

Oscilloquartz: An ADVA Company Commands Reference

syslog-control
Enable or disable the logging of System Security events, Alarm events or Audit events to the
Syslog server.

Security Level
Provisioning

Command Level
Alarm Log

Audit Log

Security Log

Syntax
syslog-control <control>

Enable or Disable logging System Security logs,

control Alarm logs or Audit logs to the Syslog server.
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable the logging of Security events, Alarm events or
Audit events to the SysLog server.

Examples
To set System Alarm Log events:
ADVA--> configure system
ADVA:system--> alarm-log
ADVA:system:alm-log--> syslog-control disabled
ADVA:system:alm-log--> show alm-log-config

Syslog Storage : disabled

Log to File : enabled

To set System Audit log events:

ADVA--> configure system
ADVA:system--> audit-log
ADVA:system:audit-log--> syslog-control disabled
ADVA:system:audit-log--> show audit-log-config

Syslog Storage : disabled

Log to File : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 867

Oscilloquartz: An ADVA Company Commands Reference

To set System Security log events:

ADVA--> configure system
ADVA:system--> security-log
ADVA:system:security-log--> syslog-control enabled
ADVA:system:security-log--> show sec-log-config

Syslog Storage : enabled

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 868

Oscilloquartz: An ADVA Company Commands Reference

syslog-timestamp-format
Select the type of syslog server time stamp format:

l adva: Uses the format YYYY-MM-DD hh:mm:ssxxx:yy. This is the default

option.
l rfc3164: Uses the format Mmm dd hh:mm:ss

Command Level
Configure System

Syntax
syslog-timestamp-format <type>

Type of syslog server time stamp format.

type
Valid entry: adva or rfc3164. The default is adva.

Examples
ADVA--> configure system
ADVA:system--> syslog-timestamp-format rfc3164
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 869

Oscilloquartz: An ADVA Company Commands Reference

Sys Time Of Day Type : local

Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : rfc3164

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

system-defaults db
Create (save), restore or transfer a system default database.

Security Level
Provisioning

Command Level
Admin Database

Syntax
For Admin Database - System Defaults - New or Restore:

system-defaults db [new | restore] [no | yes]

For Admin Database - System Defaults - Save:

system-defaults db save

For Admin Database - System Defaults - Transfer File:

system-defaults db transfer-file [ftp | scp | sftp] [get | put] <userid> [password | no-
password] <password> <ip-version> [<ipaddress>|<ipv6-address>] <filename>

A valid user-name on the remote server.

userid
Valid entry: Valid user-name on the remote server
Password for the User ID on the remote server. Not
entered if preceded by “no-password”, which is only
password valid for a ftp protocol.
Valid entry: Valid password for the User ID on the
remote server

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 870

Oscilloquartz: An ADVA Company Commands Reference

IP version of the remote File server.

ip-version Valid entry: ip-address (for Ipv4), ipv6-address (for
IPv6). The default is ip-address.
IPv4 address of the remote file server.
ipv4-address
Valid entry: Valid IP Address
IPv6 address of the remote file server.
ipv6-address Valid entry: Valid IPv6 unicast address of the remote
file server.
The name of the file to get or put. This is the file
name and path from the server root directory. The
file name and path are case sensitive and must not
filename exceed 255 characters.
Valid entry: The file name must be 1-255 characters
long using these characters: a-z, A-Z, 0-9, ., -, and
_. The name must start with a digit or character.

Guidelines
This command is used to create (save), restore, overwrite with the factory defaults (new) or
transfer a system default database file. The ‘new’ and ‘restore’ options both cause a system
reboot, so a ‘no, yes’ option exists to allow backing out before execution. ‘New’ uses the
factory default database and overwrites both the system default database and active
database - it resets the NE to factory defaults. ‘Save’ overwrites the system default database
(originally identical to the factory defaults) with the current active database, making the
current database the system default. ‘Restore’ uses the existing system default database to
overwrite the current running configuration.

Different privileges are required for the operations:

l Superuser privilege is required for:

l save
l restore
l new
l Provisioning privilege is required for:
l transfer-file

The new or restore operations overwrite the active database. Care must
be taken to ensure that the configuration of the restored database
matches that of the system, or traffic may be affected.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 871

Oscilloquartz: An ADVA Company Commands Reference

Examples
Example of creating a new system default database:
ADVA--> admin database
ADVA:database--> system-defaults db save
ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

Example of restoring a system to an existing system default database:

ADVA--> admin database
ADVA:database--> system-defaults db restore yes
(system reboots)

Example of returning a system to factory defaults:

ADVA--> admin database
ADVA:database--> system-defaults db new yes
(system reboots)

Example of performing a file transfer for a system default database backup operation,
where the db-filetransfer-ip condition notification code is set to na:
ADVA:database--> system-defaults db transfer-file ftp put johannsen password *********
ip-address 10.10.10.10 10_03_27_DB
ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

ADVA:database--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |db-filetransfer-ip |nsa |near |rcv |na |2014-03-12,12:32:13
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-03-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-03-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-03-
12,11:45:52

When the file transfer has completed, the status updates:

ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 872

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

system-defaults value-file
Transfer a system default value database file from a remote file server using a FTP, SFTP, or
SCP protocol.

Security Level
Provisioning

Command Level
Admin Database

Syntax
For Admin Database - System Defaults - Value File:

system-defaults value-file transfer-file [ftp | sftp | scp] get <userid> [password | no-
password] <password> <ip-version> [ <ipv4-address> | <ipv6-address>] <filename>

A valid user-name on the remote server.

userid
Valid entry: Valid user-name on the remote server
Password for the User ID on the remote server. Not
entered if preceded by “no-password”, which is only
password valid for a ftp protocol.
Valid entry: Valid password for the User ID on the
remote server.
IP version of the remote File server.
ip-version Valid entry: ip-address (for IPv4), ipv6-address (for
IPv6). The default is ip-address.
IPv4 address of the remote file server.
ipv4-address
Valid entry: Valid IPv4 address.
IPv6 address of the remote file server.
ipv6-address Valid entry: Valid IPv6 unicast address of the remote
file server.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 873

Oscilloquartz: An ADVA Company Commands Reference

The name of the file to get. This is the file name and
path from the server root directory. The file name
and path are case sensitive and must not exceed 255
characters.
For diagnostics files, you should append a .zip
extension, which facilitates file decompression after
the file is transferred.
filename
For Debug file (last-reset-cause), you should append
a .img extension to facilitate analysis by ADVA
personnel (The file can only be opened by an ADVA
personnel with special tools).
Valid entry: The file name must be 1-255 characters
long using these characters: a-z, A-Z, 0-9, ., -, and
_. The name must start with a digit or character.

Guidelines
This command is used to transfer a system default value file. The system default value file
contains the values used whenever a new entity is created. A new file should not be loaded
unless it is known that the new default values contained therein will not create conflicts that
result in improper operation or conflicts with other entities.

Examples
Example of performing a file transfer for a system default database backup operation,
where the db-filetransfer-ip condition notification code is set to na:
ADVA:database--> system-defaults value-file transfer-file ftp put johannsen password
********* ip-address 10.10.10.10 10_03_27_DB
ADVA:database--> show file-services-status

File services status : success

File services percent complete : 0
File services mode : IDLE

ADVA:database--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |db-filetransfer-ip |nsa |near |rcv |na |2014-01-12,12:32:13
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2014-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2014-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2014-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2014-01-
12,11:45:52

When the file transfer has completed, the status updates:

ADVA:database--> show file-services-status

File services status : success

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 874

Oscilloquartz: An ADVA Company Commands Reference

File services percent complete : 0

File services mode : IDLE

Related Commands
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 875

Oscilloquartz: An ADVA Company Commands Reference

system-tod-ptp-clk
Select a Time of Day (TOD) source for the system when the System Tod source type is set to
PTP.

Security Level
Provisioning

Command Level
Configure System

Syntax
system-tod-ptp-clk <ts-eid>

A valid PTP time source.

ts-eid Valid entry: ts-ne-n. Where: ne=1, n=1. Example: ts-
1-1.

Guidelines
This command is used to select a Time of Day (TOD) source for the system when the System
TOD source type is set to PTP.

Examples
ADVA--> configure system
ADVA:system--> system-tod-ptp-clk ts-1-1
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 876

Oscilloquartz: An ADVA Company Commands Reference

SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

system-tod-type
Change system Time Of Day (TOD) source type.

Security Level
Provisioning

Command Level
Configure System

Syntax
system-tod-type <tod-type> [<tod-source>]

The TOD source type.

tod-type Valid entry: Local, NTP, PTP-Clock.The default is
Local.
The Source of TOD. Applicable if tod-type is set to
PTP-Clock.
tod-source
Valid entry: ts-ne-n. Where: ne=1, n=1. Example: ts-
1-1.

Guidelines
This command is used to configure the Time of Day source. When NTP or PTP Clock is
selected, the system clock synchronize its time to the selected TOD source.

Examples
ADVA--> configure system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 877

Oscilloquartz: An ADVA Company Commands Reference

ADVA:system--> system-tod-type local

ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : disabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled
SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 878

Oscilloquartz: An ADVA Company Commands Reference

tacacs-privilege-control
Enable or Disable TACACS privilege control.

Security Level
superuser

Command Level
Configure User Security

Syntax
tacacs-privilege-control [disabled | enabled]

Guidelines
When Enabled, the system expects the User Privilege level to be returned from the
TACACS+ server.

When Disabled, the system does not expect User Privilege level information from the
TACACS+ server, but use the privilege level set in the tacacs-user-privilege attribute.

Examples
ADVA--> configure user-security
ADVA:user-sec--> tacacs-privilege-control disabled
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 879

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol
regenerate-ssl-certificate
auth-type
security-strength
config-ssl-strength
security-trap-type
config-user <user-id> cli-paging
show active-ssl-certificate
config-user <user-id> comment
show all-users
config-user <user-id> login-
show local-user
timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show security-system
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 880

Oscilloquartz: An ADVA Company Commands Reference

tacacs-user-privilege
Default privilege level when TACACS control is disabled. When tacacs-privilege-control is
disabled, this value is used as the user's privilege level once authenticated by the TACACS+
server.

When tacacs-privilege-control is enabled, this value is left blank.

Security Level
superuser

Command Level
Configure User Security

Syntax
tacacs-user-privilege <privilege_level>

The default privilege level when TACACS Privilege Control is

privilege_level disabled. Valid entries are: maintenance, provisioning, retrieve,
superuser. Default: superuser

Examples
ADVA--> configure user-security
ADVA:user-sec--> tacacs-privilege-control disabled
ADVA:user-sec--> tacacs-user-privilege provisioning
ADVA:user-sec--> show security-system

Authentication Protocol : none

Access Order : local
Authentication Type : pap
NAS IPv4 Address : 0.0.0.0
NAS IPv6 Address : DDDD:0000:0000:0000:0000:0000:0000:000A
Security Policy Strength : high
....Log Anonymization Interval : 0
SSH MD5 Finger Print : CE:5B:FB:8A:7E:69:55:EB:A0:ED:5A:2F:28:64:E1:EA
SSH SHA1 Finger Print :
B9:DE:32:49:F0:42:23:98:B2:70:B4:4A:A3:61:29:E1:38:68:51:D3
Key Generation Status : idle
RADIUS Accounting : disabled
SSL Cipher Strength : low
TACACS Privilege Control : disabled
TACACS Default Privilege Level : provisioning
. .Security Trap Type : disabled
.....User Privilege Management
.......................Control : disabled
User Privilege Upgrade
Response Timeout (minutes) : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 881

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol
regenerate-ssl-certificate
auth-type
security-strength
config-ssl-strength
security-trap-type
config-user <user-id> cli-paging
show active-ssl-certificate
config-user <user-id> comment
show all-users
config-user <user-id> login-
show local-user
timeout
show provisioned-ssl-certificate
config-user <user-id> password
show remote-user
config-user <user-id> priv-level
show security-system
delete <user-id>
tacacs-privilege-control
log-anonyme-interval
tacacs-user-privilege
nas-ip-address
unlock-user
nas-ipv6-address
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 882

Oscilloquartz: An ADVA Company Commands Reference

target-mtie-performance
Configure the frequency performance target of a Syncjack Telecom Slave.

Security Level
Provisioning

Command Level
Configure syncjack

Syntax
target-mtie-performance <frequency-target>

Target value for frequency performance

frequency- measurements.
target Valid entry: g823-PDH-sync, g823-PDH-traffic
g8261.1-output-wander, default g823-PDH-traffic

Guidelines
This command is used to configure the target value for frequency performance for a
Syncjack Telecom Slave.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack--> configure clock-analysis
ADVA-NE-1:syncjack:clock-analysis--> configure telecom-slave ts-1-1
ADVA-NE-1:syncjack:clock-analysis:ts-1-1--> target-mtie-performance g823-PDH-traffic
ADVA-NE-1:syncjack:clock-analysis:ts-1-1--> back
ADVA-NE-1:syncjack:clock-analysis--> show syncjack-telecom-slave ts-1-1
Clock Recovery State : freerun
FREQUENCY RECOVERY PERFORMANCE :
Frequency traceability : false
Time since Frequency traceability change, (s) : 2008
Frequency recovery target mask : g823-PDH-traffic
Current Clock Recovery Score : Not Available
Time of Last Clock Recovery Score update : 2014-01-24,17:24:53
PHASE RECOVERY PERFORMANCE :
Time traceability : false
Time since Time traceability change, (s) : 2008
Target Phase Recovery Accuracy, (ns) : 1250
Current Phase Recovery Score : Not Available
Time of Last Phase Recovery Score update : 2014-01-24,17:24:53

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 883

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add clock-probe
master-ip-address
add ptp-clock-probe
mtie-mask-margin
delete clock-probe
mtie-mask-type
delete ptp-clock-probe
name (ne, probe)
delete history-result
phase-performance-target
show clock-probe
ptp-flowpoint
show ptp-clock-probe
reference, reference-eid
show syncjack-telecom-slave
slave-ipv4-address
show history-result
source-eid
direction
source-type
expected-ql
target-mtie-performance
ip-version

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 884

Oscilloquartz: An ADVA Company Commands Reference

telnet
Enable or Disable telnet access.

Security Level
Provisioning

Command Level
Configure System

Syntax
telnet <control>

Enable or Disable telnet access.

control
Valid entry: enabled, disabled; Default is enabled.

Guidelines
This command is used to enable or disable telnet access for the system. If enabled, the user
can access the system through a telnet connection.

Telnet is an unsecure protocol. Use of this protocol can have an impact on the security of
the system.

Examples
ADVA--> configure system
ADVA:system--> telnet enabled
ADVA:system--> show system

System Name : OSA 5422

System Location :
System Contact :
System Description : OSA 5422
Proxy ARP : disabled
Management Traffic Bridging : disabled
Management Traffic Bridging Security : disabled
System Default Gateway : 192.168.178.5
Release Version : 10.5.1-352
SNMP Engine ID : 800009f0030080ea842d70
SNMP Auth Traps : disabled
NTP Mode : ntp-client
CLI Security prompt : disabled
Auto Provisioning Mode : autoprov
Serial Port : enabled
Auto log off upon serial port disconnect : enabled
Telnet : enabled
SSH : enabled
HTTP : enabled
HTTPS : enabled
FTP : disabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 885

Oscilloquartz: An ADVA Company Commands Reference

SFTP : enabled
SCP : enabled
Validation Timer Expiration : Not Applicable
Activation Time : Not Applicable
Local Time : 2018-01-08,10:46:05
System Up Time : 2 hrs 56 mins 16 secs
File services status : success
File services percent complete : 0
File services mode : IDLE
Sys Time Of Day Type : local
Sys Time Of Day Clock Eid : none
Syslog Timestamp Format : adva

Related Commands
show audit-log
admin-state
show conditions
alias
show ne-conditions
list sys-resource
show system
show alarms
syslog-timestamp-format

test-alarm
Raises or clears a test alarm on the system.

Security Level
Maintenance

Command Level
Configure System

Syntax
test-alarm [raise | clear] [access-port-eid | network-port-eid |
nte-eid]

Examples
ADVA--> configure system
ADVA:system--> test-alarm raise nteosa5422-1-1-1
ADVA:system--> show conditions

|Entity Id |ConditionType |Svc|Loc |Dir |NC |TimeStamp |--

-------------------------|--------------------------|---|-----|----|---|-----------------
|
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-
12-02,22:30:36
|nteosa5422-1-1-1 |test-alarm |nsa|near |rcv |mj |2015-
12-02,22:35:53
|sync-1-1-1-1 |frngsync |nsa|near |na |nr |2015-
11-18,17:21:00

ADVA:system--> test-alarm clear nteosa5422-1-1-1

ADVA:system--> show conditions

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 886

Oscilloquartz: An ADVA Company Commands Reference

|Entity Id |ConditionType |Svc|Loc |Dir |NC |TimeStamp |--

-------------------------|--------------------------|---|-----|----|---|-----------------
|
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-
12-02,22:30:36
|sync-1-1-1-1 |frngsync |nsa|near |na |nr |2015-
11-18,17:21:00

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 887

Oscilloquartz: An ADVA Company Commands Reference

time-clock-alias
Enter an Alias for a Time Clock.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
time-clock-alias <alias>

A character string (0 to 256 characters) representing

the Alias of the entity.
Valid entry: Character string - 0 to 256 characters, no
alias space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.

Guidelines
This command is used modify the Time Clock Alias. For valid entity identifiers, see
Equipment / Entity IDs .

Examples
Example of changing the Time Clock Alias:
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> time-clock-alias TCLK1
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : tracking
User Request Action :
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 96
Time Traceability Status : time-hold-over

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 888

Oscilloquartz: An ADVA Company Commands Reference

Expected QL :
Current QL :
Time Scale : ptp
Time Holdover Performance :
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

time-code
Sets the time code in the optical port or in the RS-422 port of the IRIG-B line card.

Command Level
configure irig-opt

configure irig-rs422

Syntax
time-code <time code>

Select the applicable time code. Default is b004.

time code Valid values RS-422 port: b002, b004, b006, b007, 1pps, 1ppm, 1pph.
Valid values optical port: b004, b006, b007.

Example
ADVA--> network-element ne-1
ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-opt irig_opt-1-1-2-1
ADVA-NE-1:irig_opt-1-1-2-1--> time-code b004

ADVA--> network-element ne-1

ADVA-NE-1--> configure irig-b irig_b-1-1-2
ADVA-NE-1:irig_b-1-1-2--> configure irig-rs422 irig_rs422-1-1-2-1

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 889

Oscilloquartz: An ADVA Company Commands Reference

ADVA-NE-1:irig_rs422-1-1-2-1--> time-code b004

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 890

Oscilloquartz: An ADVA Company Commands Reference

time-holdover-performance
Modify time holdover performance for this entity.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
time-holdover-performance <time_hold_perf>

The time holdover performance for this entity.

time_hold_
perf Valid entry: 10000ns, 1000ns, 1500ns, 5000ns, 500ns.
Default is 500ns.

Guidelines
This command is used to modify the time holdover performance for this entity. For valid
entity identifiers, see Equipment / Entity IDs .

Examples
Example of modifying the time holdover performance:
ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> time-holdover-performance 500ns
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : none
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 891

Oscilloquartz: An ADVA Company Commands Reference

Current Time Of Day : Not Available

e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref
lockout
admin-state show time-clock
manual-switch
clear sync-alias
network-clock-type
clear-lockout sync-ref-alias
priority (sync/timeclock)
clear-wtr sync-ref-candidate
selection-mode
delete syncref time-clock-alias
show alarm-attributes
delete timeref time-ref-alias
show sync
e-Prtc-Mode wtr-time
show sync-available-refs
expected-ql
show syncref
forced-switch

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 892

Oscilloquartz: An ADVA Company Commands Reference

time-ref-alias
Enter an Alias for a Time Reference.

Security Level
Provisioning

Command Level
Configure Time Clock

Syntax
time-ref-alias <timeref-eid> <alias>

The Entity Identifier of a Time Clock Reference.

timeref-eid Valid entry: timeref-eid-ne-shelf-nte-n,Where: ne=1,

shelf=1, nte=1 timeclock=1,n=1-2.Example: timeref-
1-1-1-1-1
A character string (0 to 256 characters) representing
the Alias of the entity.
Valid entry: Character string - 0 to 256 characters, no
alias space; Default is null. Empty string or string
containing SPACE must be enclosed in quotation
marks. String consisting of only SPACE is not
allowed.

Guidelines

This command is used modify the Time Reference Alias. For valid entity identifiers, see
Equipment / Entity IDs .

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> time-ref-alias timeref-1-1-1-1-1 GPS1
ADVA-NE-1:time_clock-1-1-1-1--> show timeref timeref-1-1-1-1-1

Alias : GPS1
Priority : 1
Source : gps-1-1-1-1
Status : ref-ok
State : active

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 893

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

time-reference-loss-handling
Configures the stratum level to report when the NTP clock loses reference.

Command Level
Configure NTP Clock

Syntax
time-reference-loss-handling <gnss-sync-loss-handling>

The stratum level to report.

Valid values: strtm-1-li-unkn, strtm-10-li-unkn, strtm-11-li-unkn,
gnss-sync-loss- strtm-12-li-unkn, strtm-13-li-unkn, strtm-14-li-unkn,
handling strtm-15-li-unkn, strtm-16-li-nochg, strtm-16-li-unkn,
strtm-2-li-unkn, strtm-3-li-unkn, strtm-4-li-unkn, strtm-5-li-unkn,
strtm-6-li-unkn, strtm-7-li-unkn, strtm-8-li-unkn, strtm-9-li-unkn

Examples
ADVA--> config ntp
ADVA:ntp--> network-element ne-1
ADVA:ntp-NE-1--> config ntp-clock ntp_clock-1-1
ADVA:ntp-NE-1:ntp_clock-1-1-->
ADVA:ntp-NE-1:ntp_clock-1-1--> time-reference-loss-handling strtm-1-li-unkn

Related Commands
add ntp-clock, mode,sym-key-authentication

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 894

Oscilloquartz: An ADVA Company Commands Reference

timeout
Configure the timeout value for timing out a security access request to this Remote
Authentication Server.

Security Level
superuser

Command Level
Remote Authentication Server

Syntax
timeout <num-seconds>

The Number of Seconds to wait after a challenge to

num-seconds a Remote Authentication Server before timing out.
Valid entry: 5 to 60. Default is 10.

Guidelines
This command configures the timeout value for timing out a security access request to this
Remote Authentication Server. The value is specified in seconds. The range of supported
values is: 5 to 60. Default is 10. Up to three RAP servers (1-3) may be configured.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-rap 1
ADVA:user-sec:rem_auth_server-1--> timeout 10
ADVA:user-sec:server-1--> show rap-server

RAS Status : disabled

Order : first
IP Version : ipv6
IPv4 Address : 0.0.0.0
IPv6 Address : 2001:0000:85A3:0000:0000:0000:0000:000A
Port : 1812
Number of Retries : 3
Timeout : 10
Secret : *****
RADIUS accounting port : 1813

Related Commands
accounting-port
retries
control
secret
ip-address (rap)
show rap-server
order
timeout
port

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 895

Oscilloquartz: An ADVA Company Commands Reference

time-zone-name
Sets a name for the system time zone.

Command Level
Configure System

Syntax

time-zone-name <string>

string A string of alphanumeric characters, up to 10 characters.

Examples
ADVA:system:timezone--> time-zone-name localtime
ADVA:system:timezone--> show time-zone
UTC Offset : +00:00
TimeZone Name : localtime
DST ControlEnabled : disabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 02:00
DST EndTime : 02:00

Related Commands
show time-zone

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 896

Oscilloquartz: An ADVA Company Commands Reference

trace-route
The trace-route command records the route (the specific gateway computers at each hop)
through the Internet between the NID and a specified IPv4 host. It also calculates and
displays the amount of time each hop took.

Security Level
Maintenance

Command Level
Any

Syntax
trace-route <ip-address>

IPv4 address of a station to reach.

ip-address
Valid entry: Valid IPv4 Address

Guidelines
The trace-route command operates by generating an ICMP packet, including in the packet a
“time to live” (TTL) time limit value that is designed to be exceeded by the first router that
receives it, which will return a Time Exceeded message. This enables a trace route to
determine the time required for the hop to the first router. Increasing the time limit value, it
re-sends the packet so that it will reach the second router in the path to the destination,
which returns another Time Exceeded message, and so forth. Trace route determines when
the packet has reached the destination by including a port number that is outside the
normal range. When it's received, a Port Unreachable message is returned, enabling trace
route to measure the time length of the final hop.

Examples
ADVA--> configure communication
ADVA:comms--> trace-route 172.17.23.22
ADVA:comms--> show trace-route-result

--- 172.17.23.22 Trace Route Results ---

1: 172.17.23.22 (172.17.23.22) 1.103ms pmtu 16436
1: 172.17.23.22 (172.17.23.22) 0.581ms reached
Resume: pmtu 16436 hops 1 back 1

Related Commands

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 897

Oscilloquartz: An ADVA Company Commands Reference
add arp-entry flush-arp-cache show mgmttnl
add ip-route list mgmttnl show ping-result
add mgmttnl ping show src-addr
configure src-addr show arp-entries show trace-route-
delete arp-entry show eth0 result
delete ip-route show ip-interface eth0 trace-route
delete mgmttnl show ip-routes

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 898

Oscilloquartz: An ADVA Company Commands Reference

trace-route6
Determines the traffic route to reach a particular IPv6 host.

Security Level
Maintenance

Command Level
Any

Syntax
trace-route6 <ipv6-address>

The IPv6 address of the host that the route is

ipv6- traced.
address Valid entry: A valid global IPv6 Unicast address
(not including in-band management).

Guidelines
This command is used to determine the traffic route to reach a particular IPv6 host.

This utility works by sending out ICMP packets which are discarded by the routers along the
way. The ICMPv6 error messages sent back by these routers reveals the path between the
local NE and the remote host.

Performing a traceroute of an IP address does not

include in-band management for IPv6 addresses.

Examples
ADVA--> configure communication
ADVA:comms--> trace-route6 FDAA:0000:0000:0000:0000:0000:0000:000A
ADVA:comms--> show trace-route-result

--- FDAA:0000:0000:0000:0000:0000:0000:000A ---

1?: [LOCALHOST] 0.116ms pmtu 65536
1: fdaa::a 0.535ms reached
1: fdaa::a 0.381ms reached
Resume: pmtu 65536 hops 1 back 64

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 899

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
add ip-route delete ndp-entry
show mgmttnl
add ipv6-route flush-arp-cache
show ping-result
add mgmttnl list mgmttnl
show src-addr
add ndp-entry ping6
show trace-route-
configure src-addr show arp-entries
result
delete arp-entry show eth0
trace-route6
delete ip-route show ip-interface eth0
ipv6-sys-def-gateway
delete ipv6-route show ip-routes
ipv6-unicast-addr
delete mgmttnl show ipv6-routes
rip-ng-control
dhcpv6-control prefix-length
ip-mode

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 900

Oscilloquartz: An ADVA Company Commands Reference

transfer-file
Transfer a software image to the local NE when performing a software upgrade using a FTP,
SFTP, or SCP protocol. This is step one of the software upgrade procedure.

The three step software upgrade feature utilizes the following commands:

1 Transfer the software image to the local NE using the transfer-file

command.

2 Install the new Software into the Standby partition using the install
command.

3 Activate the new Software using the activate command.

This command is also used to transfer the database file for a backup/restore operation
using FTP, SFTP or SCP protocol. This is step one of the Database Restore procedure, or step
two of the Database Backup procedure.

This command is also used to initiate a file transfer of a config file to/from a remote server
using FTP, SFTP or SCP protocol.

This command is also used to initiate a file transfer of a diagnostics file to/from a remote
server using FTP, SFTP or SCP protocol.

The specified protocol must be enabled in order for this request to succeed.

Security Level
maintenance/provisioning/superuser

Command Level
Admin Configuration File

Admin Database

Admin Diagnostics

Admin Last-reset-cause

Admin Upgrade

Alarm Log

Audit Log

Security Log

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 901

Oscilloquartz: An ADVA Company Commands Reference

Syntax
For Admin Upgrade, Admin Diagnostics, Admin Last Reset Cause, Alarm Log, Audit Logand
Security Log:

transfer-file [ftp | sftp | scp] <userid> [password | nopassword] [<password>] <ip-

version> [<ipv4-address>| <ipv6-address>] <filename>

For Admin Database:

transfer-file [ftp | sftp | scp] [get | put] <userid> [password | no-password]

[<password>] <ip-version> [<ipv4-address>| <ipv6-address>] <path>/<filename>

For Config File upload:

transfer-file [ftp | sftp | scp] put <userid> [password | nopassword] [<password>] <ip-
version> [<ipv4-address>| <ipv6-address>] <filename> <path>

For Config File download:

transfer-file [ftp | sftp | scp] get <userid> [password | nopassword] [<password>] <ip-
version> [<ipv4-address>| <ipv6-address>] <path>/<filename> [<confirmation>]

A valid user-name on the remote server.

userid Valid entry: See Valid user-name on the remote
server.
Password for the User ID on the remote server. Not
entered if preceded by “no-password”, which is only
valid for a ftp protocol.
password
Valid entry: Valid password for the User ID on the
remote server (see Valid password for the User ID on
the remote server).
IP version of the remote File server.
ip-version Valid entry: ip-address (for IPv4), ipv6-address (for
IPv6). The default is ip-address.
IPv4 address of the remote file server.
ipv4-address
Valid entry: Valid IPv4 address.
IPv6 address of the remote file server.
ipv6-address Valid entry: Valid IPv6 unicast address of the remote
file server.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 902

Oscilloquartz: An ADVA Company Commands Reference

The path where the file is stored, or to be stored. It

must be an existing path from the server root
directory. The path is case sensitive and must be
path
leading with a forward slash (“/”). The path and the
filename combination must not exceed 255
characters.
The name of the file to get. This is the file name and
path from the server root directory. The file name
and path are case sensitive and must not exceed 255
characters.
For diagnostics files, you should append a .zip
extension, which facilitates file decompression after
the file is transferred.
For Debug file (last-reset-cause), you should append
filename a .img extension to facilitate analysis by ADVA
personnel (The file can only be opened by an ADVA
personnel with special tools).
Valid entry: The file name must be 1-255 characters
long using these characters: a-z, A-Z, 0-9, ., -, and
_. The name must start with a digit or character.

To upload a config file, the

destination filename cannot be
designated.

Guidelines
This command is used to initiate a file transfer for a new Software Package using a FTP,
SFTP, or SCP protocol. The Software Package file is transferred to a temporary storage
location on the NE. Use the show file-services-status to verify when the transfer is 100%
complete.

This command is also used to initiate a file transfer of a database file or a configuration file
to/from a remote server using a FTP, SFTP, or SCP protocol. The specified protocol must be
enabled both on the Network Element and the File server for this request to succeed.

A database backup is not allowed if a software upgrade is in progress.

If the condition notification codes swdl-filetransfer-ip (Software Download File

Transfer In Progress) and/or db-filetransfer-ip (Database File Transfer In Progress)
are set to anything other than not reported (nr), the associated file transfer condition may
be retrieved by using the show conditions command. Use the show release-versions
command to observe the active and standby software versions.

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 903

Oscilloquartz: An ADVA Company Commands Reference

Different privilege levels are required to run this command depending on the importance of
the files to be transfered：

l Maintenance privilege is required for:

o Upgrade

l Provisioning privilege is required for:

o Alarm Log

o Audit Log
o Config File
o Database
l Superuser privilege is required for:
o Security Log

o Diagnostic File
o Last Reset Cause

Examples
Example of performing a file transfer for a software upgrade where the swdl-
filetransfer-ip condition notification code is set to na:

ADVA--> admin upgrade

ADVA:upgrade--> transfer-file affectedEntity csm-2 scp johannsen password ********* ip-
address 10.10.10.10 /projects/software/build_OSA 5422/ OSA 5422.8.1.138.img

ADVA:upgrade--> show file-services-status

File Transfer Status : in_progress
File Transfer Percent Complete : 28
Database or Upgrade Current State : SWDOWNLOAD

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |swdl-filetransfer-ip|nsa |near |rcv |na |2015-01-
12,12:32:13
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2015-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-01-
12,11:45:52

When the file transfer has completed, the status updates:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 904

Oscilloquartz: An ADVA Company Commands Reference

ADVA:upgrade--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 100
Database or Upgrade Current State : SWDOWNLOAD

ADVA:upgrade--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2015-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-01-
12,11:45:52

Example of performing a file transfer for a database backup operation where the db-
filetransfer-ip condition notification code is set to na:

ADVA--> admin database

ADVA:database--> backup-db
ADVA:database--> transfer-file ftp put johannsen no-password ip-address 10.10.10.10 10_
03_27_DB
ADVA:database--> show file-services-status

File Transfer Status : success

File Transfer Percent Complete : 33
Database or Upgrade Current State : DBDOWNLOAD

ADVA:database--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp

|system |db-filetransfer-ip |nsa |near |rcv |na |2015-01-
12,12:32:13
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2015-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-01-
12,11:45:52

When the file transfer has completed, the status updates:

ADVA:database--> show file-services-status

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 905

Oscilloquartz: An ADVA Company Commands Reference

File Transfer Status : success

File Transfer Percent Complete : 100
Database or Upgrade Current State : IDLE

Example of performing a configuration file transfer, where the db-filetransfer-ip

condition notification code is set to na:

ADVA--> admin config-file

ADVA:config-file--> transfer-file scp johannsen password ********* ip-address 10.10.10.10
configfile_1

ADVA--> admin config-file

ADVA:config-file--> show file-services-status

Configuration File Action : transfer

Configuration File Status : in_progress
File Transfer Percent Complete : 28

ADVA:config-file--> show conditions

|Entity Id |ConditionType |Svc Aff|Loc |Dir |NC |TimeStamp
|system |db-filetransfer-ip |nsa |near |rcv |na |2015-01-
12,12:32:13
|network-1-1-1-1 |sfp-mismatch |sa |near |rcv |cr |2015-01-
12,11:38:13
|access-1-1-1-1 |efm-rld |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |efm-rce |sa |near |rcv |mn |2015-01-
12,11:38:22
|access-1-1-1-1 |lnkdn |sa |near |rcv |cr |2015-01-
12,11:45:52

When the file transfer has completed, the status updates:

ADVA:config-file--> show file-services-status

Configuration File Action : transfer

Configuration File Status : success
File Transfer Percent Complete : 100

Related Commands
For Software Upgrade:
activate show audit-log
cancel activation show conditions
cancel validation-timer show file-services-status
install show release-versions
revert to-standby transfer-file

For Database:

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 906

Oscilloquartz: An ADVA Company Commands Reference
activate-db show file-services-status
backup-db system-defaults db
restore-db system-defaults value-file
show db-version transfer-file

For Config-Files:
description (config-file) show configfile
load show configfile-status
remove show running-config
restart-with-configfile trace-route
save transfer-file

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 907

Oscilloquartz: An ADVA Company Commands Reference

unicast-restart-timer
Configure the Unicast Restart Timer of a Slave Only Ordinary Clock SOOC.

Security Level
Provisioning

Command Level
Configure SOOC

Command Level
unicast-restart-timer <time>

time Valid entry: 30-1800

Guidelines
This command is used to configure the Unicast Restart Timer of a Slave Only Ordinary Clock
SOOC.

Examples
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> unicast-restart-timer 400
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc

Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave Address : 100.100.10.0
Slave Subnet Mask : 255.255.255.255
Interface name : doctest
Current Offset From Master : 0
Current History 15 min. Index : 0
Master Clock Type : one-step
Unicast Message negotiation : disabled
Master Delay Mechanism : end-to-end
Master Priority : 0
Master IP Version : ipv4
Master IPv4 Address : 100.100.10.1
Master Announce Message Rate : 1-pkt-per-sec
Master Announce Receipt Timeout : 2
Master Delay Response Message Rate : 1-pkt-per-sec
Master Delay Response Receipt Timeout : 128
Master Sync Message Rate : 1-pkt-per-sec
Master Sync Receipt Timeout : 10
Master Lease Duration : 300
Recent Clock Class : 0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 908

Oscilloquartz: An ADVA Company Commands Reference

Recent Mean Path Delay, (ns) : 0

Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 400
Unicast Timeout, (s) : 1

Related Commands
add ocs-port priority-mode-value
admin-state
alias show last-rcv-delay-rsp-msg
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show ocs-port
show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 909

Oscilloquartz: An ADVA Company Commands Reference

unicast-timeout
Configure the Unicast timeout.

Security Level
Provisioning

Command Level
Configure SOOC

Syntax
unicast-timeout <timeout>

time- The timeout for unicast.

out Valid entry: 1-600 (seconds). The default is 1 (seconds).

Guidelines
This command is used to configure the Unicast timeout.

Example
ADVA--> configure ptp
ADVA:ptp--> network-element ne-1
ADVA:ptp-NE-1--> configure telecom-slave ts-1-1
ADVA:ptp-NE-1:ts-1-1--> configure sooc sooc-1-1-1
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> unicast-timeout 30
ADVA:ptp-NE-1:ts-1-1:sooc-1-1-1--> show sooc

Alias :
EVC : none
Administrative State : management
Secondary States : act,sgeo
Operational State : outage
Slave Address : 100.100.10.0
Slave Subnet Mask : 255.255.255.255
Interface name : doctest
Current Offset From Master : 0
Current History 15 min. Index : 0
Master Clock Type : one-step
Unicast Message negotiation : enabled
Master Delay Mechanism : end-to-end
Master Priority : 0
Master IP Version : ipv4
Master IPv4 Address : 100.100.10.1
Master Announce Message Rate : 1-pkt-per-sec
Master Announce Receipt Timeout : 2
Master Delay Response Message
Rate : 1-pkt-per-sec
Master Delay Response Receipt
Timeout : 128
Master Sync Message Rate : 1-pkt-per-sec
Master Sync Receipt Timeout : 10

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 910

Oscilloquartz: An ADVA Company Commands Reference

Master Lease Duration : 300

Recent Clock Class : 0
Recent Mean Path Delay, (ns) : 0
Recent Sync PDV, (ns) : 0
IP Priority Mode : none
IP Priority Mode Value : 0
Unicast Restart Timer, (s) : 60
Unicast Timeout, (s) : 30

Related Commands
add ocs-port priority-mode-value
admin-state
alias show last-rcv-delay-rsp-msg
delete ocs-port show last-rcv-sync-msg
master-announce-rcpt-timeout show ocs-port
show perf-mon
master-priority show sooc
master-syncrcp-timeout unicast-restart-timer
priority-mode unicast-timeout

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 911

Oscilloquartz: An ADVA Company Commands Reference

unlock-user
Unlock a user account.

Security Level
Superuser

Command Level
Configure user-security

Syntax
unlock-user <user-name>

Guidelines
This command is used to unlock a locked user. Only a superuser can unlock a user.

Examples
ADVA--> configure user-security
ADVA:user-sec--> show local-user netadmin

User Name : netadmin

Password : *******
Comment : Default User
Privilege Level : maintenance
Login Timeout : 60
Failed Login Attempts : 3
Last Login : never
User Locked Out : true
User Last Locked Out Time : never
CLI Paging : enabled
ADVA:user-sec--> unlock-user netadmin
ADVA:user-sec--> show local-user netadmin
User Name : netadmin
Password : *******
Comment : Default User
Privilege Level : maintenance
Login Timeout : 60
Failed Login Attempts : 0
Last Login : never
User Locked Out : false
User Last Locked Out Time : 2014-06-07, 10:27:57
CLI Paging : enabled

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 912

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
access-order
auth-protocol regenerate-ssl-certificate
auth-type security-strength
config-ssl-strength security-trap-type
config-user <user-id> cli-paging show active-ssl-certificate
config-user <user-id> comment show all-users
config-user <user-id> login- show local-user
timeout show provisioned-ssl-certificate
config-user <user-id> password show remote-user
config-user <user-id> priv-level show security-system
delete <user-id> tacacs-privilege-control
log-anonyme-interval tacacs-user-privilege
nas-ip-address unlock-user
regenerate-ssh-keys

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 913

Oscilloquartz: An ADVA Company Commands Reference

utc-offset
Configure the offset of the system time from the Coordinated Universal Time (UTC).

Command Level
configure system time-zone

Syntax
utc-offset <utc-offset>

The offset of the system time from the UTC in hours.

utc-offset
Valid values: -12:00 to +14:59. The default value is +00:00.

Example DST Offset from UTC

ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:timezone--> utc-offset +9:00
ADVA:system:timezone--> show time-zone

UTC Offset : +09:00

DST ControlEnabled : enabled
DST UtcOffset : +01:00
DST StartMonth : march
DST EndMonth : november
DST StartDay : SUNDAY>=8
DST EndDay : SUNDAY<=7
DST StartTime : 00:00
DST EndTime : 02:00

Related Commands
dst-control
dst-start-month
dst-end-day
dst-start-time
dst-end-month
dst-utc-offset
dst-end-time
show time-zone
dst-start-day

utc-to-tai-offset
Sets the UTC (Coordinated Universal Time) offset from TAI (International Atomic Time) in
seconds.

Command Level
configure system time-zone

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 914

Oscilloquartz: An ADVA Company Commands Reference

Syntax
utc-to-tai-offset <offset>

The offset in seconds.

offset
Valid values: -45000 to 45000. The default is 37.

Examples
ADVA--> configure system
ADVA:system--> time-zone
ADVA:system:time-zone--> utc-to-tai-offset 15

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 915

Oscilloquartz: An ADVA Company Commands Reference

valid-until
Setting for SSL Certificate.

Security Level
superuser

Command Level
Configure SSL Certificate

Syntax
valid-until <valid-until>

The date the SSL Certificate

valid- expires.
until
Valid entry: yyyy-mm-dd

Guidelines
This command sets the valid-until date for a provisioned SSL Certificate.

Examples
ADVA--> configure user-security
ADVA:user-sec--> config-ssl-certificate ?
ssl_certificate-1 The SSL certificate Entity Identifier
ADVA:user-sec--> config-ssl-certificate ssl_certificate-1
ADVA:user-sec:ssl_certificate-1--> valid-until 2029-12-11
ADVA:user-sec:ssl_certificate-1--> show provisioned-ssl-certificate
Country : US
State : Texas
Locality : Richardson
Organization : ADVA Optical Networking
Organization Unit : Ethernet Access
Name : ADVA
Email : [email protected]
Valid Until : 2029-12-11,10:32:53

Related Commands
admin-state show audit-log
alias show conditions
list sys-resource show ne-conditions
show alarms show system

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 916

Oscilloquartz: An ADVA Company Commands Reference

vlan-id
Configure the VLAN ID of a management tunnel.

Security Level
Provisioning

Command Level
Configure Management Tunnel

Syntax
vlan-id <VLAN-ID>

VLAN ID.
VLAN-ID
Valid entry: 0 to 4095

Examples
ADVA--> configure communication
ADVA:comms--> configure mgmttnl mgmt_tnl-1
ADVA:comms:mgmt_tnl-1--> vlan-id 4095
ADVA:comms:mgmt_tnl-1--> show mgmttnl

IP Address : 120.120.120.10
Subnet Mask : 255.255.255.0
VLAN ID : 4095
S-tag VLAN ID : 4095
S-tag VLAN : disabled
DHCP : disabled
DHCP Client ID Control : disabled
DHCP Client ID : OSA 5422
RIPv2 : disabled
COS : 7
Buffer Size (Kbytes) : 32
CIR (bps) : 256000
EIR (bps) : 768000
MTU (bytes) : 1500
Encapsulation Type : ethernet
Tunnel Mode : vlan
Tunnel Name : phoenix1
Associated Port : access-1-1-1-1
System Default Gateway : 10.10.32.1
Interface : eth0

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 917

Oscilloquartz: An ADVA Company Commands Reference

Related Commands
add arp-entry
ip-address (comms)
add ip-route
list mgmttnl
add mgmttnl
netmask
buffer-size
rip2Pkts-control
cir
show mgmttnl
cos
svlan-control
dhcp-client-id
svlan-id
dhcp-client-id-control
sys-def-gateway
dhcp-control
vlan-id
eir

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 918

Oscilloquartz: An ADVA Company Commands Reference

wtr-time
Set the SYNCREF or Time Clock Wait To Restore (WTR) time.

Security Level
Provisioning

Command Level
Configure Sync

Configure Time Clock

Syntax
wtr-time <n>

Wait to restore time is minutes.

n Valid entry: 0 to 12. Default is
5.

Guidelines
When setting the wait to restore (WTR) time, the 0...12 is measured in minutes.

Examples
Example at the Configure Sync level:
ADVA--> network-element ne-1
ADVA-NE-1--> configure sync sync-1-1-1-1
ADVA-NE-1:sync-1-1-1-1--> wtr-time 5
ADVA-NE-1:sync-1-1-1-1--> show sync
Admin State : in-service
Operational State : normal
Secondary States : act
Network Clock Type : option1-sdh
WTR Time : 5
Selection Mode : prio-mode
Selected Reference : none
Clock Mode : freerun
Sync QL : ql-eec1
User Request Action : none
User Request Target : none

Example at the Configure Time Clock level:

ADVA--> network-element ne-1
ADVA-NE-1--> configure time-clock time_clock-1-1-1-1
ADVA-NE-1:time_clock-1-1-1-1--> wtr-time 5
ADVA-NE-1:time_clock-1-1-1-1--> show time-clock

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 919

Oscilloquartz: An ADVA Company Commands Reference

Alias : TCLK1
Admin State : in-service
Operational State : normal
Secondary States : act
WTR Time (min) : 5
Selection Mode : prio-mode
Sync Reference Candidate : disabled
Selected Reference : gps-1-1-1-1
Clock Mode : locked
User Request Action : none
User Request Target : none
Leap 59 : disabled
Leap 61 : disabled
Clock Class : 84
Time Traceability Status : time-locked
Expected QL : ql-none
Current QL :
Time Scale : ptp
Time Holdover Performance : 500ns
Utc Offset (ns) : 35
Current Time Of Day : Not Available
e-PRTC Mode Enabled : disabled

Related Commands
add syncref
list syncref
add timeref show time-clock
lockout
admin-state sync-alias
manual-switch
clear sync-ref-alias
network-clock-type
clear-lockout sync-ref-candidate
priority (sync/timeclock)
clear-wtr time-clock-alias
selection-mode
delete syncref time-holdover-
show alarm-attributes
delete timeref performance
show sync
e-Prtc-Mode time-ref-alias
show sync-available-refs
expected-ql wtr-time
show syncref
forced-switch

x-y-display-points
Configures coordinates to display custom MTIE mask on a graph.

Command Level
Configure User MTIE Mask

Syntax
x-y-display-points <string>

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 920

Oscilloquartz: An ADVA Company Commands Reference

Specify up to 64 X, Y coordinates. Separate between X and Y with a

comma (,). Separate between pairs with a semicolon (;).
X – predefined observation intervals in seconds: 0.1, 0.2, 0.5, 1, 2, 5,
10, 20, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 50000,
100000
string
Valid values: 0.1 to 100000.
Y – the expected MTIE results you have calculated in
measurements-points command.
Valid values: integers.

Examples
ADVA--> network-element ne-1
ADVA-NE-1--> configure syncjack
ADVA-NE-1:syncjack:user-mtie-mask--> configure user-mtie-mask user_mtie_mask-1-1
ADVA-NE-1:syncjack:user_mtie_mask-1-1--> x-y-display-points
0.05,2300;0.1,4600;0.2,9000;32,9000;38,10640;45,12600;50,14000;55,15400;64,17920;100,1800
0;1000,18000

Related Commands
mtie-mask-name, measurements-points, show user-mtie-mask

OSA 5422 R11.1.1 CLI Reference Guide - Issue: Issue A 921