0% found this document useful (0 votes)
2 views

Script CLI Router

Uploaded by

leaatachibana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
2 views

Script CLI Router

Uploaded by

leaatachibana
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Script CLI router

Continue with configuration dialog? [yes/no]: no

Press RETURN to get started!

Router>conf term

% Invalid input detected at '^' marker.

Router>enable

Router#conf term

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#inter fa0/0

Router(config-if)#no shut

Router(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#ip address 192.168.1.1 255.255.255.0

Router(config-if)#ex

Router(config)#ip dhcp pool voice

Router(dhcp-config)#network 192.168.1.0 255.255.255.0

Router(dhcp-config)#%DHCPD-4-PING_CONFLICT: DHCP address conflict: server pinged 192.168.1.1.

defaut
^

% Invalid input detected at '^' marker.

Router(dhcp-config)#default-router 192.168.1.1

Router(dhcp-config)#option 150 ip 192.168.1.1

Router(dhcp-config)#exit

Router(config)#ip dhcp excluded-address 192.168.1.1

Router(config)#

Router(config)#tel

Router(config-telephony)#telephony-service

Router(config-telephony)#max-ephones 3

Router(config-telephony)#max-dn 3

Router(config-telephony)#ip source-address 192.168.1.1 port 2000

Router(config-telephony)#auto assign 1 to 3

Router(config-telephony)#ex

Router(config)#ephone-dn 1

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 1.1, changed state to up

Router(config-ephone-dn)#number 0811

Router(config-ephone-dn)#ephone-dn 2

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up

Router(config-ephone-dn)#number 0812

Router(config-ephone-dn)#ephone-dn 3

Router(config-ephone-dn)#%LINK-3-UPDOWN: Interface ephone_dsp DN 3.1, changed state to up

Router(config-ephone-dn)#number 0813

Router(config-ephone-dn)#exit

Router(config)#write
^

% Invalid input detected at '^' marker.

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#write

Building configuration...

[OK]

Router#

You might also like