P100+ FILTERS

For 7000/7800/9000 Series Facepieces

MORE AIR.
MORE WEAR.

Moldex’s new streamlined P100 filters, with exclusive

IonicAir Filtration TechnologyTM, and a surface area
that’s up to 3x larger than other popular filters,
provides class leading comfort and easier breathing.

Exclusive IonicAir Filtration Technology means more

P100+ IONICAIR airflow, more comfort, more wear and compliance.

FILTRATION TECHNOLOGY TM Increased surface area means longer service life and
TM TM lower cost of ownership.
IonicAir Filtration Technology (IFT ) is a
Moldex proprietary process for enhancing filter P100 particulate filter is lighter than traditional filter
efficiency and lowering breathing resistance. cartridges.
Moldex’s ultimate in breathability and comfort.
Can be used with 7000, 7800 and 9000 series respirators.

Encased in Dura-Mesh® for durability and rough handling.

NIOSH approved; Efficiency level of 99.97% or greater

against both oil and non-oil based particulate aerosols.

Meets heat and flame resistance in accordance with

ANSI/ISEA 110-2009 Section 7.11.1.

100% PVC-Free for a reduced environmental impact.

*Always refer to warnings, limitations and restrictions before using Moldex masks, cartridges or filters in
any environment or application.

TRY IT OUT
Qualified Users, visit https://www.moldex.com/P100IFT to request your
samples and experience the advanced breathability of IFT TM for yourself.
 P100+ FILTERS
For 7000/7800/9000 Series Facepieces

P100 Filter Average Initial Inhalation Resistance

These results show the average initial inhalation resistance measured in ambient air conditions at 42.5 lpm.

25

20
Resistance in mmH20

15

10

0
3M 2091 Moldex 7740 3M 2291 Moldex 7740+ Honeywell MSA
Premium Premium 75FFP100 818342

1. Based upon random sample testing performed by a 3rd party lab in February through August of 2024. Data reviewed by an independent statistician for
statistical significance.
2. Tests were performed on individual samples without a facepiece.
3. No significant difference in initial inhalation resistance was found between Moldex 7740 and 3M 2291.
4. Actual results may vary depending on respirator wearer, specific facepiece, and other workplace conditions.

P100 ACCESSORIES
Piggyback Adaptor
MODEL DISPLAY CASE
Combine Moldex P100 & NUMBER
DESCRIPTION
QUANTITY QUANTITY
P100+ filters with 7107, 7207,
7927 7307, 7407, 7507, and 7607 7740+ P100 Filter with IonicAir Filtration Technology™ (IFT™) 1 Pair 30 Bags
cartridges only.
P100 Filter plus Nuisance Organic Vapors/Acid Gases with
7750+ 1 Pair 30 Bags
IonicAir Filtration Technology™ (IFT™)
Filter Cover
Protects filter media from P100 Filter plus Nuisance Organic Vapors with IonicAir
7760+ 1 Pair 30 Bags
sparks and splashes. Use Filtration Technology™ (IFT™)
with 7740+, 7750+, and
7760+ P100 filters. 7927 Piggyback Adaptor 1 Pair 30 Bags
7888
7888 P100 Filter Cover 1 Pair 30 Bags

APPLICATIONS*:
For contaminants such as asbestos, lead, inorganic arsenic, cadmium and MDA that fall under an OSHA substance specific standard requiring a High
Efficiency Particulate Air (HEPA) filter. Can also be used in applications such as pharmaceutical, battery, nuclear, welding and metal processing. Outside of
the USA, check with all applicable and local government regulations. Also for use in environments where oil-based particulates are present.

*Always refer to warnings, limitations and restrictions before using Moldex masks, cartridges or filters in any environment or application.

MOLDEX TECHNICAL ASSISTANCE

Moldex provides all of the technical assistance required to set up a respiratory protection program. For more information call +1 (800) 421-0668 or +1 (310) 837-6500 ext. 512, or
email: [email protected] or visit www.moldex.com.

MOLDEX-METRIC, INC. For user instructions refer

10111 Jefferson Blvd.
to instructions manual
Culver City, CA 90232 or visit https://www.
TEL: +1 (800) 421-0668 or +1 (310) 837-6500 moldex.com/resources/
FAX: +1 (310) 837-9563 instructional-resources/ Made in USA PVC FREE
Hecho en USA Libre de PVC
EMAIL: [email protected] | www.moldex.com fitting-instructions- Fabriqué aux É.U. PVC Gratuit
respiratory/
U.S. & CANADA CUSTOMER SERVICE
TEL: +1 (800) 421-0668, Ext. 550
Moldex®, Ideas that wear well®, and the PVC-Free logo are registered trademarks of Moldex. Also one or more of the following U.S. Patents: D 983,963 S, D1,021,095 S and D1,019,951 S. 7888PLUS-807 REV C 9/24