Scribd
Upload
11 views

PulsaFeeder MicroTrac Tech Sheet

Uploaded by

unni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views

PulsaFeeder MicroTrac Tech Sheet

Uploaded by

unni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

The MicroTrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed

inhibitor in cooling
tower systems. Featuring innovative toroidal sensor technology, the MicroTrac provides an economical control platform that is not susceptible to
sensor fouling and never requires calibration! The MicroTrac toroidal conductivity sensor is factory calibrated for the life of the probe eliminating
routine calibrations saves you valuable service time and money. By design, the MicroTrac toroidal conductivity sensor has no exposed electrodes,
which means that there is nothing to wear out or foul. When installed according to the manufacturer’s instructions, the need for routine sensor removal
and cleaning is virtually eliminated.

The MicroTrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor. The controller activates two
independent relay outputs based on bleed and a selectable feed mode of operation. The MicroTrac conductivity controller has a 0 - 9,999 μS/cm
range, making it ideal for other applications as well, such as rinse, industrial process, wastewater, etc.

FEATURES OPERATING BENEFITS


• Toroidal conductivity sensor factory calibrated and • Easy to use.
maintenance free. • No calibration required.
• Selectable rising or falling setpoint for open or • Reduced potential for fouling.
closed loop control. • Easy Installation.
• Water meter pulse timer. • Two year warranty.
• Percent timer. • Large range: 0 – 9,999 μS/cm.
• % post bleed timer. • Simple user interface.
• Limit timer.

CONTROLS
Timers
• Water meter pulse timer
• Percent timer
• % post bleed timer
• Limit timer
• Alarm output

Cooling Tower Controller


SPECIFICATION AND MODEL SELECTION
MODEL Voltage Relay & Power Wiring Sensor Tee Flow Switch
MTC1LTA-XXX 115V Liquid-Tight Yes Standard Panel & Flow Assembly
MTC1LTA-CZXXX 230V Liquid-Tight Yes Standard Panel & Flow Assembly
MTC1LTF-XXX 115V Liquid-Tight Yes Flow Switch with 15’ cable
MTC1LTF-CZXXX 230V Liquid-Tight Yes Flow Switch with 15’ cable
MTC1LTX-XXX 115V Liquid-Tight Yes Standard (no flow switch)
MTC1LTX-CZXXX 230V Liquid-Tight Yes Standard (no flow switch)
MTC1PTA-XXX 115V Prewired w/ pigtails Yes Standard Panel & Flow Assembly
MTC1PTF-XXX 115V Prewired w/ pigtails Yes Flow Switch with 15’ cable
MTC1PTL-XXX 115V Prewired w/ pigtails Yes Standard Panel & Flow Assembly
MTC1PTX-XXX 115V Prewired w/ pigtails Yes Standard (no flow switch)
MTC1XTF-XXX 115V Prewired & Liquid-Tight Yes Flow Switch with 15’ cable
MTC1XTX-XXX 115V Prewired & Liquid-Tight Yes Standard (no flow switch)
CE approved, non-prewired models, or 230 VAC, change the end of the code from “-XXX” to “-CZXXX”

ENGINEERING DATA
Controller Specifications Sensor Specifications
Enclosure IP65 / NEMA 4X Maximum Temperature 1220F / 500C
Temperature Range 1220F / 500C Flow Switch Activate Flow Rate Approx. 1 GPM / 3.78 LPM
Power Supply 90 VAC – 240 VAC / 50/60Hz / 5A Conductivity Temp. Compensation Range 320F - 1220F / 00C - 500C
Line Voltage @ 240VA per Relay (2 Amps @ Maximum Pressure 125 PSI (8.6 BAR)
Control Output
120VAC)) Flow Switch Materials of Construction PVC and Glass Filled Polypropylene
Display LCD Sensor Type Toroidal Conductivity
Set Point Range 0 - 9,999 μS/cm Cable Length, Standard 15’ / 4.5m
Set Point Differential (Hystersis) Fixed 5% below the set point Cable Length, Maximum 100’ / 30.5m
0.5” Standard Thread-Excludes Tee and
Thread Size
Reducer
Maximum Outside Diameter 1.5” / 38mm-Excludes Tee and Reducer
Materials of Construction Virgin Polypropylene

DIMENSIONS

27101 Airport Road


Punta Gorda, FL 33982

An ISO Certified Company MTC001 E19

You might also like